xhci: Add reset on resume quirk for asrock p67 host

The asrock p67 xhci controller completely dies on resume, add a
quirk for this, to bring the host back online after a suspend.

This should be backported to stable kernels as old as 2.6.37.

Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@kernel.org

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17541d0..cb16de2 100644 (file)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC     0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
 
+#define PCI_VENDOR_ID_ETRON            0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67       0x7023
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
                xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
                xhci->limit_active_eps = 64;
        }
+       if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+                       pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+               xhci->quirks |= XHCI_RESET_ON_RESUME;
+               xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+       }
 
        /* Make sure the HC is halted. */
        retval = xhci_halt(xhci);

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 15eb4c3..f5fe1ac 100644 (file)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
                msleep(100);
 
        spin_lock_irq(&xhci->lock);
+       if (xhci->quirks & XHCI_RESET_ON_RESUME)
+               hibernated = true;
 
        if (!hibernated) {
                /* step 1: restore register */

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ba90af1..d8bbf5c 100644 (file)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1310,6 +1310,7 @@ struct xhci_hcd {
  */
 #define XHCI_EP_LIMIT_QUIRK    (1 << 5)
 #define XHCI_BROKEN_MSI                (1 << 6)
+#define XHCI_RESET_ON_RESUME   (1 << 7)
        unsigned int            num_active_eps;
        unsigned int            limit_active_eps;
        /* There are two roothubs to keep track of bus suspend info for */