[ARM] Remove arch-imx from build system

arch-imx is superseeded by the MXC architecture support.
This patch removes arch-imx from the build system.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e60ec54..be680f3 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -308,15 +308,6 @@ config ARCH_H720X
        help
          This enables support for systems based on the Hynix HMS720x
 
-config ARCH_IMX
-       bool "IMX"
-       select CPU_ARM920T
-       select GENERIC_GPIO
-       select GENERIC_TIME
-       select GENERIC_CLOCKEVENTS
-       help
-         Support for Motorola's i.MX family of processors (MX1, MXL).
-
 config ARCH_IOP13XX
        bool "IOP13xx-based"
        depends on MMU
@@ -682,8 +673,6 @@ endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
-
 source "arch/arm/mach-h720x/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
@@ -1022,7 +1011,7 @@ source "mm/Kconfig"
 config LEDS
        bool "Timer and CPU usage LEDs"
        depends on ARCH_CDB89712 || ARCH_EBSA110 || \
-                  ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+                  ARCH_EBSA285 || ARCH_INTEGRATOR || \
                   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
                   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
                   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
@@ -1188,7 +1177,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1213,14 +1202,11 @@ config CPU_FREQ_INTEGRATOR
 
          If in doubt, say Y.
 
-config CPU_FREQ_IMX
-       tristate "CPUfreq driver for i.MX CPUs"
-       depends on ARCH_IMX && CPU_FREQ
-       default n
-       help
-         This enables the CPUfreq driver for i.MX CPUs.
-
-         If in doubt, say N.
+config CPU_FREQ_PXA
+       bool
+       depends on CPU_FREQ && ARCH_PXA && PXA25x
+       default y
+       select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
 endif
 

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e84729b..921a627 100644 (file)
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,7 +135,6 @@ endif
     plat-$(CONFIG_PLAT_S3C64XX)           := s3c64xx s3c
  machine-$(CONFIG_ARCH_LH7A40X)           := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
- machine-$(CONFIG_ARCH_IMX)       := imx
  machine-$(CONFIG_ARCH_H720X)     := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index b4cf691..3eb87bd 100644 (file)
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -155,7 +155,7 @@ config MMC_ATMELMCI_DMA
 
 config MMC_IMX
        tristate "Motorola i.MX Multimedia Card Interface support"
-       depends on ARCH_IMX
+       depends on ARCH_MX1
        help
          This selects the Motorola i.MX Multimedia card Interface.
          If you have a i.MX platform with a Multimedia Card slot,

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b1..3f5d5a2 100644 (file)
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)         /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)         /* Send break */
 #define  UCR1_TDMAEN     (1<<3)         /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
 #define  UCR1_UARTCLKEN  (1<<2)         /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -127,7 +127,7 @@
 #define  UCR3_RXDSEN    (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN    (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define  UCR3_REF25     (1<<3)  /* Ref freq 25 MHz, only on mx1 */
 #define  UCR3_REF30     (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
 #endif
@@ -180,13 +180,6 @@
 #define  UTS_SOFTRST    (1<<0)  /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR       204
-#define MINOR_START            41
-#define DEV_NAME               "ttySMX"
-#define MAX_INTERNAL_IRQ       IMX_IRQS
-#endif
-
 #ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START            16

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 83a185d..7c61251 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -118,7 +118,7 @@ config SPI_GPIO
 
 config SPI_IMX
        tristate "Freescale iMX SPI controller"
-       depends on ARCH_IMX && EXPERIMENTAL
+       depends on ARCH_MX1 && EXPERIMENTAL
        help
          This enables using the Freescale iMX SPI controller in master
          mode.

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7826bdc..93258e1 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -397,7 +397,7 @@ config FB_SA1100
 
 config FB_IMX
        tristate "Motorola i.MX LCD support"
-       depends on FB && (ARCH_IMX || ARCH_MX2)
+       depends on FB && (ARCH_MX1 || ARCH_MX2)
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT