spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs

Add recovery processing in case FIFO overrun error occurs with DMA transfer mode.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 6cb2fdb..c8efa75 100644 (file)
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -352,16 +352,26 @@ static irqreturn_t pch_spi_handler(int irq, void *dev_id)
                        "%s returning due to suspend\n", __func__);
                return IRQ_NONE;
        }
-       if (data->use_dma)
-               return IRQ_NONE;
 
        io_remap_addr = data->io_remap_addr;
        spsr = io_remap_addr + PCH_SPSR;
 
        reg_spsr_val = ioread32(spsr);
 
-       if (reg_spsr_val & SPSR_ORF_BIT)
-               dev_err(&board_dat->pdev->dev, "%s Over run error", __func__);
+       if (reg_spsr_val & SPSR_ORF_BIT) {
+               dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
+               if (data->current_msg->complete != 0) {
+                       data->transfer_complete = true;
+                       data->current_msg->status = -EIO;
+                       data->current_msg->complete(data->current_msg->context);
+                       data->bcurrent_msg_processing = false;
+                       data->current_msg = NULL;
+                       data->cur_trans = NULL;
+               }
+       }
+
+       if (data->use_dma)
+               return IRQ_NONE;
 
        /* Check if the interrupt is for SPI device */
        if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
@@ -815,10 +825,11 @@ static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
        }
 }
 
-static void pch_spi_start_transfer(struct pch_spi_data *data)
+static int pch_spi_start_transfer(struct pch_spi_data *data)
 {
        struct pch_spi_dma_ctrl *dma;
        unsigned long flags;
+       int rtn;
 
        dma = &data->dma;
 
@@ -833,7 +844,9 @@ static void pch_spi_start_transfer(struct pch_spi_data *data)
                                 initiating the transfer. */
        dev_dbg(&data->master->dev,
                "%s:waiting for transfer to get over\n", __func__);
-       wait_event_interruptible(data->wait, data->transfer_complete);
+       rtn = wait_event_interruptible_timeout(data->wait,
+                                              data->transfer_complete,
+                                              msecs_to_jiffies(2 * HZ));
 
        dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
                            DMA_FROM_DEVICE);
@@ -860,6 +873,8 @@ static void pch_spi_start_transfer(struct pch_spi_data *data)
        pch_spi_clear_fifo(data->master);
 
        spin_unlock_irqrestore(&data->lock, flags);
+
+       return rtn;
 }
 
 static void pch_dma_rx_complete(void *arg)
@@ -1187,7 +1202,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 
                if (data->use_dma) {
                        pch_spi_handle_dma(data, &bpw);
-                       pch_spi_start_transfer(data);
+                       if (!pch_spi_start_transfer(data))
+                               goto out;
                        pch_spi_copy_rx_data_for_dma(data, bpw);
                } else {
                        pch_spi_set_tx(data, &bpw);
@@ -1225,6 +1241,7 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 
        } while (data->cur_trans != NULL);
 
+out:
        pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
        if (data->use_dma)
                pch_spi_release_dma(data);