drivers/net/wireless/rtl818x/rtl8180_dev.c

   1
   2 /*
   3  * Linux device driver for RTL8180 / RTL8185
   4  *
   5  * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
   6  * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
   7  *
   8  * Based on the r8180 driver, which is:
   9  * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
  10  *
  11  * Thanks to Realtek for their support!
  12  *
  13  * This program is free software; you can redistribute it and/or modify
  14  * it under the terms of the GNU General Public License version 2 as
  15  * published by the Free Software Foundation.
  16  */
  17
  18 #include <linux/init.h>
  19 #include <linux/pci.h>
  20 #include <linux/slab.h>
  21 #include <linux/delay.h>
  22 #include <linux/etherdevice.h>
  23 #include <linux/eeprom_93cx6.h>
  24 #include <net/mac80211.h>
  25
  26 #include "rtl8180.h"
  27 #include "rtl8180_rtl8225.h"
  28 #include "rtl8180_sa2400.h"
  29 #include "rtl8180_max2820.h"
  30 #include "rtl8180_grf5101.h"
  31
  32 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
  33 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
  34 MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
  35 MODULE_LICENSE("GPL");
  36
  37 static DEFINE_PCI_DEVICE_TABLE(rtl8180_table) = {
  38         /* rtl8185 */
  39         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
  40         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
  41         { PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
  42
  43         /* rtl8180 */
  44         { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
  45         { PCI_DEVICE(0x1799, 0x6001) },
  46         { PCI_DEVICE(0x1799, 0x6020) },
  47         { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
  48         { }
  49 };
  50
  51 MODULE_DEVICE_TABLE(pci, rtl8180_table);
  52
  53 static const struct ieee80211_rate rtl818x_rates[] = {
  54         { .bitrate = 10, .hw_value = 0, },
  55         { .bitrate = 20, .hw_value = 1, },
  56         { .bitrate = 55, .hw_value = 2, },
  57         { .bitrate = 110, .hw_value = 3, },
  58         { .bitrate = 60, .hw_value = 4, },
  59         { .bitrate = 90, .hw_value = 5, },
  60         { .bitrate = 120, .hw_value = 6, },
  61         { .bitrate = 180, .hw_value = 7, },
  62         { .bitrate = 240, .hw_value = 8, },
  63         { .bitrate = 360, .hw_value = 9, },
  64         { .bitrate = 480, .hw_value = 10, },
  65         { .bitrate = 540, .hw_value = 11, },
  66 };
  67
  68 static const struct ieee80211_channel rtl818x_channels[] = {
  69         { .center_freq = 2412 },
  70         { .center_freq = 2417 },
  71         { .center_freq = 2422 },
  72         { .center_freq = 2427 },
  73         { .center_freq = 2432 },
  74         { .center_freq = 2437 },
  75         { .center_freq = 2442 },
  76         { .center_freq = 2447 },
  77         { .center_freq = 2452 },
  78         { .center_freq = 2457 },
  79         { .center_freq = 2462 },
  80         { .center_freq = 2467 },
  81         { .center_freq = 2472 },
  82         { .center_freq = 2484 },
  83 };
  84
  85
  86 void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
  87 {
  88         struct rtl8180_priv *priv = dev->priv;
  89         int i = 10;
  90         u32 buf;
  91
  92         buf = (data << 8) | addr;
  93
  94         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
  95         while (i--) {
  96                 rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
  97                 if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
  98                         return;
  99         }
 100 }
 101
 102 static void rtl8180_handle_rx(struct ieee80211_hw *dev)
 103 {
 104         struct rtl8180_priv *priv = dev->priv;
 105         unsigned int count = 32;
 106
 107         while (count--) {
 108                 struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
 109                 struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
 110                 u32 flags = le32_to_cpu(entry->flags);
 111
 112                 if (flags & RTL818X_RX_DESC_FLAG_OWN)
 113                         return;
 114
 115                 if (unlikely(flags & (RTL818X_RX_DESC_FLAG_DMA_FAIL |
 116                                       RTL818X_RX_DESC_FLAG_FOF |
 117                                       RTL818X_RX_DESC_FLAG_RX_ERR)))
 118                         goto done;
 119                 else {
 120                         u32 flags2 = le32_to_cpu(entry->flags2);
 121                         struct ieee80211_rx_status rx_status = {0};
 122                         struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
 123
 124                         if (unlikely(!new_skb))
 125                                 goto done;
 126
 127                         pci_unmap_single(priv->pdev,
 128                                          *((dma_addr_t *)skb->cb),
 129                                          MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
 130                         skb_put(skb, flags & 0xFFF);
 131
 132                         rx_status.antenna = (flags2 >> 15) & 1;
 133                         /* TODO: improve signal/rssi reporting */
 134                         rx_status.signal = (flags2 >> 8) & 0x7F;
 135                         /* XXX: is this correct? */
 136                         rx_status.rate_idx = (flags >> 20) & 0xF;
 137                         rx_status.freq = dev->conf.channel->center_freq;
 138                         rx_status.band = dev->conf.channel->band;
 139                         rx_status.mactime = le64_to_cpu(entry->tsft);
 140                         rx_status.flag |= RX_FLAG_TSFT;
 141                         if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
 142                                 rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
 143
 144                         memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
 145                         ieee80211_rx_irqsafe(dev, skb);
 146
 147                         skb = new_skb;
 148                         priv->rx_buf[priv->rx_idx] = skb;
 149                         *((dma_addr_t *) skb->cb) =
 150                                 pci_map_single(priv->pdev, skb_tail_pointer(skb),
 151                                                MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
 152                 }
 153
 154         done:
 155                 entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
 156                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
 157                                            MAX_RX_SIZE);
 158                 if (priv->rx_idx == 31)
 159                         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
 160                 priv->rx_idx = (priv->rx_idx + 1) % 32;
 161         }
 162 }
 163
 164 static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
 165 {
 166         struct rtl8180_priv *priv = dev->priv;
 167         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
 168
 169         while (skb_queue_len(&ring->queue)) {
 170                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
 171                 struct sk_buff *skb;
 172                 struct ieee80211_tx_info *info;
 173                 u32 flags = le32_to_cpu(entry->flags);
 174
 175                 if (flags & RTL818X_TX_DESC_FLAG_OWN)
 176                         return;
 177
 178                 ring->idx = (ring->idx + 1) % ring->entries;
 179                 skb = __skb_dequeue(&ring->queue);
 180                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
 181                                  skb->len, PCI_DMA_TODEVICE);
 182
 183                 info = IEEE80211_SKB_CB(skb);
 184                 ieee80211_tx_info_clear_status(info);
 185
 186                 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) &&
 187                     (flags & RTL818X_TX_DESC_FLAG_TX_OK))
 188                         info->flags |= IEEE80211_TX_STAT_ACK;
 189
 190                 info->status.rates[0].count = (flags & 0xFF) + 1;
 191
 192                 ieee80211_tx_status_irqsafe(dev, skb);
 193                 if (ring->entries - skb_queue_len(&ring->queue) == 2)
 194                         ieee80211_wake_queue(dev, prio);
 195         }
 196 }
 197
 198 static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
 199 {
 200         struct ieee80211_hw *dev = dev_id;
 201         struct rtl8180_priv *priv = dev->priv;
 202         u16 reg;
 203
 204         spin_lock(&priv->lock);
 205         reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
 206         if (unlikely(reg == 0xFFFF)) {
 207                 spin_unlock(&priv->lock);
 208                 return IRQ_HANDLED;
 209         }
 210
 211         rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
 212
 213         if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
 214                 rtl8180_handle_tx(dev, 3);
 215
 216         if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
 217                 rtl8180_handle_tx(dev, 2);
 218
 219         if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
 220                 rtl8180_handle_tx(dev, 1);
 221
 222         if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
 223                 rtl8180_handle_tx(dev, 0);
 224
 225         if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
 226                 rtl8180_handle_rx(dev);
 227
 228         spin_unlock(&priv->lock);
 229
 230         return IRQ_HANDLED;
 231 }
 232
 233 static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 234 {
 235         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 236         struct rtl8180_priv *priv = dev->priv;
 237         struct rtl8180_tx_ring *ring;
 238         struct rtl8180_tx_desc *entry;
 239         unsigned long flags;
 240         unsigned int idx, prio;
 241         dma_addr_t mapping;
 242         u32 tx_flags;
 243         u8 rc_flags;
 244         u16 plcp_len = 0;
 245         __le16 rts_duration = 0;
 246
 247         prio = skb_get_queue_mapping(skb);
 248         ring = &priv->tx_ring[prio];
 249
 250         mapping = pci_map_single(priv->pdev, skb->data,
 251                                  skb->len, PCI_DMA_TODEVICE);
 252
 253         tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
 254                    RTL818X_TX_DESC_FLAG_LS |
 255                    (ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
 256                    skb->len;
 257
 258         if (priv->r8185)
 259                 tx_flags |= RTL818X_TX_DESC_FLAG_DMA |
 260                             RTL818X_TX_DESC_FLAG_NO_ENC;
 261
 262         rc_flags = info->control.rates[0].flags;
 263         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
 264                 tx_flags |= RTL818X_TX_DESC_FLAG_RTS;
 265                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
 266         } else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
 267                 tx_flags |= RTL818X_TX_DESC_FLAG_CTS;
 268                 tx_flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
 269         }
 270
 271         if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS)
 272                 rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
 273                                                       info);
 274
 275         if (!priv->r8185) {
 276                 unsigned int remainder;
 277
 278                 plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
 279                                 (ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
 280                 remainder = (16 * (skb->len + 4)) %
 281                             ((ieee80211_get_tx_rate(dev, info)->bitrate * 2) / 10);
 282                 if (remainder <= 6)
 283                         plcp_len |= 1 << 15;
 284         }
 285
 286         spin_lock_irqsave(&priv->lock, flags);
 287         idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
 288         entry = &ring->desc[idx];
 289
 290         entry->rts_duration = rts_duration;
 291         entry->plcp_len = cpu_to_le16(plcp_len);
 292         entry->tx_buf = cpu_to_le32(mapping);
 293         entry->frame_len = cpu_to_le32(skb->len);
 294         entry->flags2 = info->control.rates[1].idx >= 0 ?
 295                 ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
 296         entry->retry_limit = info->control.rates[0].count;
 297         entry->flags = cpu_to_le32(tx_flags);
 298         __skb_queue_tail(&ring->queue, skb);
 299         if (ring->entries - skb_queue_len(&ring->queue) < 2)
 300                 ieee80211_stop_queue(dev, skb_get_queue_mapping(skb));
 301         spin_unlock_irqrestore(&priv->lock, flags);
 302
 303         rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
 304
 305         return 0;
 306 }
 307
 308 void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
 309 {
 310         u8 reg;
 311
 312         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 313         reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 314         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
 315                  reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
 316         rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
 317         rtl818x_iowrite8(priv, &priv->map->CONFIG3,
 318                  reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
 319         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 320 }
 321
 322 static int rtl8180_init_hw(struct ieee80211_hw *dev)
 323 {
 324         struct rtl8180_priv *priv = dev->priv;
 325         u16 reg;
 326
 327         rtl818x_iowrite8(priv, &priv->map->CMD, 0);
 328         rtl818x_ioread8(priv, &priv->map->CMD);
 329         msleep(10);
 330
 331         /* reset */
 332         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 333         rtl818x_ioread8(priv, &priv->map->CMD);
 334
 335         reg = rtl818x_ioread8(priv, &priv->map->CMD);
 336         reg &= (1 << 1);
 337         reg |= RTL818X_CMD_RESET;
 338         rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
 339         rtl818x_ioread8(priv, &priv->map->CMD);
 340         msleep(200);
 341
 342         /* check success of reset */
 343         if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
 344                 printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
 345                 return -ETIMEDOUT;
 346         }
 347
 348         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
 349         rtl818x_ioread8(priv, &priv->map->CMD);
 350         msleep(200);
 351
 352         if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
 353                 /* For cardbus */
 354                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 355                 reg |= 1 << 1;
 356                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
 357                 reg = rtl818x_ioread16(priv, &priv->map->FEMR);
 358                 reg |= (1 << 15) | (1 << 14) | (1 << 4);
 359                 rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
 360         }
 361
 362         rtl818x_iowrite8(priv, &priv->map->MSR, 0);
 363
 364         if (!priv->r8185)
 365                 rtl8180_set_anaparam(priv, priv->anaparam);
 366
 367         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
 368         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
 369         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
 370         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
 371         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
 372
 373         /* TODO: necessary? specs indicate not */
 374         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 375         reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 376         rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
 377         if (priv->r8185) {
 378                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
 379                 rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
 380         }
 381         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 382
 383         /* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
 384
 385         /* TODO: turn off hw wep on rtl8180 */
 386
 387         rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
 388
 389         if (priv->r8185) {
 390                 rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
 391                 rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
 392                 rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
 393
 394                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
 395
 396                 /* TODO: set ClkRun enable? necessary? */
 397                 reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
 398                 rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
 399                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 400                 reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
 401                 rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
 402                 rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 403         } else {
 404                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
 405                 rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
 406
 407                 rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
 408                 rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
 409         }
 410
 411         priv->rf->init(dev);
 412         if (priv->r8185)
 413                 rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
 414         return 0;
 415 }
 416
 417 static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 418 {
 419         struct rtl8180_priv *priv = dev->priv;
 420         struct rtl8180_rx_desc *entry;
 421         int i;
 422
 423         priv->rx_ring = pci_alloc_consistent(priv->pdev,
 424                                              sizeof(*priv->rx_ring) * 32,
 425                                              &priv->rx_ring_dma);
 426
 427         if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
 428                 printk(KERN_ERR "%s: Cannot allocate RX ring\n",
 429                        wiphy_name(dev->wiphy));
 430                 return -ENOMEM;
 431         }
 432
 433         memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
 434         priv->rx_idx = 0;
 435
 436         for (i = 0; i < 32; i++) {
 437                 struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
 438                 dma_addr_t *mapping;
 439                 entry = &priv->rx_ring[i];
 440                 if (!skb)
 441                         return 0;
 442
 443                 priv->rx_buf[i] = skb;
 444                 mapping = (dma_addr_t *)skb->cb;
 445                 *mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
 446                                           MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
 447                 entry->rx_buf = cpu_to_le32(*mapping);
 448                 entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
 449                                            MAX_RX_SIZE);
 450         }
 451         entry->flags |= cpu_to_le32(RTL818X_RX_DESC_FLAG_EOR);
 452         return 0;
 453 }
 454
 455 static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
 456 {
 457         struct rtl8180_priv *priv = dev->priv;
 458         int i;
 459
 460         for (i = 0; i < 32; i++) {
 461                 struct sk_buff *skb = priv->rx_buf[i];
 462                 if (!skb)
 463                         continue;
 464
 465                 pci_unmap_single(priv->pdev,
 466                                  *((dma_addr_t *)skb->cb),
 467                                  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
 468                 kfree_skb(skb);
 469         }
 470
 471         pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
 472                             priv->rx_ring, priv->rx_ring_dma);
 473         priv->rx_ring = NULL;
 474 }
 475
 476 static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
 477                                 unsigned int prio, unsigned int entries)
 478 {
 479         struct rtl8180_priv *priv = dev->priv;
 480         struct rtl8180_tx_desc *ring;
 481         dma_addr_t dma;
 482         int i;
 483
 484         ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
 485         if (!ring || (unsigned long)ring & 0xFF) {
 486                 printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
 487                        wiphy_name(dev->wiphy), prio);
 488                 return -ENOMEM;
 489         }
 490
 491         memset(ring, 0, sizeof(*ring)*entries);
 492         priv->tx_ring[prio].desc = ring;
 493         priv->tx_ring[prio].dma = dma;
 494         priv->tx_ring[prio].idx = 0;
 495         priv->tx_ring[prio].entries = entries;
 496         skb_queue_head_init(&priv->tx_ring[prio].queue);
 497
 498         for (i = 0; i < entries; i++)
 499                 ring[i].next_tx_desc =
 500                         cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
 501
 502         return 0;
 503 }
 504
 505 static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
 506 {
 507         struct rtl8180_priv *priv = dev->priv;
 508         struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
 509
 510         while (skb_queue_len(&ring->queue)) {
 511                 struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
 512                 struct sk_buff *skb = __skb_dequeue(&ring->queue);
 513
 514                 pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
 515                                  skb->len, PCI_DMA_TODEVICE);
 516                 kfree_skb(skb);
 517                 ring->idx = (ring->idx + 1) % ring->entries;
 518         }
 519
 520         pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
 521                             ring->desc, ring->dma);
 522         ring->desc = NULL;
 523 }
 524
 525 static int rtl8180_start(struct ieee80211_hw *dev)
 526 {
 527         struct rtl8180_priv *priv = dev->priv;
 528         int ret, i;
 529         u32 reg;
 530
 531         ret = rtl8180_init_rx_ring(dev);
 532         if (ret)
 533                 return ret;
 534
 535         for (i = 0; i < 4; i++)
 536                 if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
 537                         goto err_free_rings;
 538
 539         ret = rtl8180_init_hw(dev);
 540         if (ret)
 541                 goto err_free_rings;
 542
 543         rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
 544         rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
 545         rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
 546         rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
 547         rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
 548
 549         ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
 550                           IRQF_SHARED, KBUILD_MODNAME, dev);
 551         if (ret) {
 552                 printk(KERN_ERR "%s: failed to register IRQ handler\n",
 553                        wiphy_name(dev->wiphy));
 554                 goto err_free_rings;
 555         }
 556
 557         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
 558
 559         rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
 560         rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
 561
 562         reg = RTL818X_RX_CONF_ONLYERLPKT |
 563               RTL818X_RX_CONF_RX_AUTORESETPHY |
 564               RTL818X_RX_CONF_MGMT |
 565               RTL818X_RX_CONF_DATA |
 566               (7 << 8 /* MAX RX DMA */) |
 567               RTL818X_RX_CONF_BROADCAST |
 568               RTL818X_RX_CONF_NICMAC;
 569
 570         if (priv->r8185)
 571                 reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
 572         else {
 573                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
 574                         ? RTL818X_RX_CONF_CSDM1 : 0;
 575                 reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
 576                         ? RTL818X_RX_CONF_CSDM2 : 0;
 577         }
 578
 579         priv->rx_conf = reg;
 580         rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 581
 582         if (priv->r8185) {
 583                 reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
 584                 reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
 585                 reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
 586                 rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
 587
 588                 reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
 589                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
 590                 reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
 591                 reg |=  RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
 592                 rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
 593
 594                 /* disable early TX */
 595                 rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
 596         }
 597
 598         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
 599         reg |= (6 << 21 /* MAX TX DMA */) |
 600                RTL818X_TX_CONF_NO_ICV;
 601
 602         if (priv->r8185)
 603                 reg &= ~RTL818X_TX_CONF_PROBE_DTS;
 604         else
 605                 reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
 606
 607         /* different meaning, same value on both rtl8185 and rtl8180 */
 608         reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
 609
 610         rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
 611
 612         reg = rtl818x_ioread8(priv, &priv->map->CMD);
 613         reg |= RTL818X_CMD_RX_ENABLE;
 614         reg |= RTL818X_CMD_TX_ENABLE;
 615         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 616
 617         return 0;
 618
 619  err_free_rings:
 620         rtl8180_free_rx_ring(dev);
 621         for (i = 0; i < 4; i++)
 622                 if (priv->tx_ring[i].desc)
 623                         rtl8180_free_tx_ring(dev, i);
 624
 625         return ret;
 626 }
 627
 628 static void rtl8180_stop(struct ieee80211_hw *dev)
 629 {
 630         struct rtl8180_priv *priv = dev->priv;
 631         u8 reg;
 632         int i;
 633
 634         rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 635
 636         reg = rtl818x_ioread8(priv, &priv->map->CMD);
 637         reg &= ~RTL818X_CMD_TX_ENABLE;
 638         reg &= ~RTL818X_CMD_RX_ENABLE;
 639         rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 640
 641         priv->rf->stop(dev);
 642
 643         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 644         reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
 645         rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
 646         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 647
 648         free_irq(priv->pdev->irq, dev);
 649
 650         rtl8180_free_rx_ring(dev);
 651         for (i = 0; i < 4; i++)
 652                 rtl8180_free_tx_ring(dev, i);
 653 }
 654
 655 static int rtl8180_add_interface(struct ieee80211_hw *dev,
 656                                  struct ieee80211_vif *vif)
 657 {
 658         struct rtl8180_priv *priv = dev->priv;
 659
 660         /*
 661          * We only support one active interface at a time.
 662          */
 663         if (priv->vif)
 664                 return -EBUSY;
 665
 666         switch (vif->type) {
 667         case NL80211_IFTYPE_STATION:
 668                 break;
 669         default:
 670                 return -EOPNOTSUPP;
 671         }
 672
 673         priv->vif = vif;
 674
 675         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 676         rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
 677                           le32_to_cpu(*(__le32 *)vif->addr));
 678         rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
 679                           le16_to_cpu(*(__le16 *)(vif->addr + 4)));
 680         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 681
 682         return 0;
 683 }
 684
 685 static void rtl8180_remove_interface(struct ieee80211_hw *dev,
 686                                      struct ieee80211_vif *vif)
 687 {
 688         struct rtl8180_priv *priv = dev->priv;
 689         priv->vif = NULL;
 690 }
 691
 692 static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
 693 {
 694         struct rtl8180_priv *priv = dev->priv;
 695         struct ieee80211_conf *conf = &dev->conf;
 696
 697         priv->rf->set_chan(dev, conf);
 698
 699         return 0;
 700 }
 701
 702 static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
 703                                      struct ieee80211_vif *vif,
 704                                      struct ieee80211_bss_conf *info,
 705                                      u32 changed)
 706 {
 707         struct rtl8180_priv *priv = dev->priv;
 708         int i;
 709
 710         if (changed & BSS_CHANGED_BSSID) {
 711                 for (i = 0; i < ETH_ALEN; i++)
 712                         rtl818x_iowrite8(priv, &priv->map->BSSID[i],
 713                                          info->bssid[i]);
 714
 715                 if (is_valid_ether_addr(info->bssid))
 716                         rtl818x_iowrite8(priv, &priv->map->MSR,
 717                                          RTL818X_MSR_INFRA);
 718                 else
 719                         rtl818x_iowrite8(priv, &priv->map->MSR,
 720                                          RTL818X_MSR_NO_LINK);
 721         }
 722
 723         if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
 724                 priv->rf->conf_erp(dev, info);
 725 }
 726
 727 static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, int mc_count,
 728                                      struct dev_addr_list *mc_list)
 729 {
 730         return mc_count;
 731 }
 732
 733 static void rtl8180_configure_filter(struct ieee80211_hw *dev,
 734                                      unsigned int changed_flags,
 735                                      unsigned int *total_flags,
 736                                      u64 multicast)
 737 {
 738         struct rtl8180_priv *priv = dev->priv;
 739
 740         if (changed_flags & FIF_FCSFAIL)
 741                 priv->rx_conf ^= RTL818X_RX_CONF_FCS;
 742         if (changed_flags & FIF_CONTROL)
 743                 priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
 744         if (changed_flags & FIF_OTHER_BSS)
 745                 priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
 746         if (*total_flags & FIF_ALLMULTI || multicast > 0)
 747                 priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
 748         else
 749                 priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
 750
 751         *total_flags = 0;
 752
 753         if (priv->rx_conf & RTL818X_RX_CONF_FCS)
 754                 *total_flags |= FIF_FCSFAIL;
 755         if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
 756                 *total_flags |= FIF_CONTROL;
 757         if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
 758                 *total_flags |= FIF_OTHER_BSS;
 759         if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
 760                 *total_flags |= FIF_ALLMULTI;
 761
 762         rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
 763 }
 764
 765 static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
 766 {
 767         struct rtl8180_priv *priv = dev->priv;
 768
 769         return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
 770                (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
 771 }
 772
 773 static const struct ieee80211_ops rtl8180_ops = {
 774         .tx                     = rtl8180_tx,
 775         .start                  = rtl8180_start,
 776         .stop                   = rtl8180_stop,
 777         .add_interface          = rtl8180_add_interface,
 778         .remove_interface       = rtl8180_remove_interface,
 779         .config                 = rtl8180_config,
 780         .bss_info_changed       = rtl8180_bss_info_changed,
 781         .prepare_multicast      = rtl8180_prepare_multicast,
 782         .configure_filter       = rtl8180_configure_filter,
 783         .get_tsf                = rtl8180_get_tsf,
 784 };
 785
 786 static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
 787 {
 788         struct ieee80211_hw *dev = eeprom->data;
 789         struct rtl8180_priv *priv = dev->priv;
 790         u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
 791
 792         eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
 793         eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
 794         eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
 795         eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
 796 }
 797
 798 static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 799 {
 800         struct ieee80211_hw *dev = eeprom->data;
 801         struct rtl8180_priv *priv = dev->priv;
 802         u8 reg = 2 << 6;
 803
 804         if (eeprom->reg_data_in)
 805                 reg |= RTL818X_EEPROM_CMD_WRITE;
 806         if (eeprom->reg_data_out)
 807                 reg |= RTL818X_EEPROM_CMD_READ;
 808         if (eeprom->reg_data_clock)
 809                 reg |= RTL818X_EEPROM_CMD_CK;
 810         if (eeprom->reg_chip_select)
 811                 reg |= RTL818X_EEPROM_CMD_CS;
 812
 813         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
 814         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
 815         udelay(10);
 816 }
 817
 818 static int __devinit rtl8180_probe(struct pci_dev *pdev,
 819                                    const struct pci_device_id *id)
 820 {
 821         struct ieee80211_hw *dev;
 822         struct rtl8180_priv *priv;
 823         unsigned long mem_addr, mem_len;
 824         unsigned int io_addr, io_len;
 825         int err, i;
 826         struct eeprom_93cx6 eeprom;
 827         const char *chip_name, *rf_name = NULL;
 828         u32 reg;
 829         u16 eeprom_val;
 830
 831         err = pci_enable_device(pdev);
 832         if (err) {
 833                 printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
 834                        pci_name(pdev));
 835                 return err;
 836         }
 837
 838         err = pci_request_regions(pdev, KBUILD_MODNAME);
 839         if (err) {
 840                 printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
 841                        pci_name(pdev));
 842                 return err;
 843         }
 844
 845         io_addr = pci_resource_start(pdev, 0);
 846         io_len = pci_resource_len(pdev, 0);
 847         mem_addr = pci_resource_start(pdev, 1);
 848         mem_len = pci_resource_len(pdev, 1);
 849
 850         if (mem_len < sizeof(struct rtl818x_csr) ||
 851             io_len < sizeof(struct rtl818x_csr)) {
 852                 printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
 853                        pci_name(pdev));
 854                 err = -ENOMEM;
 855                 goto err_free_reg;
 856         }
 857
 858         if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
 859             (err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
 860                 printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
 861                        pci_name(pdev));
 862                 goto err_free_reg;
 863         }
 864
 865         pci_set_master(pdev);
 866
 867         dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
 868         if (!dev) {
 869                 printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
 870                        pci_name(pdev));
 871                 err = -ENOMEM;
 872                 goto err_free_reg;
 873         }
 874
 875         priv = dev->priv;
 876         priv->pdev = pdev;
 877
 878         dev->max_rates = 2;
 879         SET_IEEE80211_DEV(dev, &pdev->dev);
 880         pci_set_drvdata(pdev, dev);
 881
 882         priv->map = pci_iomap(pdev, 1, mem_len);
 883         if (!priv->map)
 884                 priv->map = pci_iomap(pdev, 0, io_len);
 885
 886         if (!priv->map) {
 887                 printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
 888                        pci_name(pdev));
 889                 goto err_free_dev;
 890         }
 891
 892         BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
 893         BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
 894
 895         memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
 896         memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
 897
 898         priv->band.band = IEEE80211_BAND_2GHZ;
 899         priv->band.channels = priv->channels;
 900         priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
 901         priv->band.bitrates = priv->rates;
 902         priv->band.n_bitrates = 4;
 903         dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
 904
 905         dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 906                      IEEE80211_HW_RX_INCLUDES_FCS |
 907                      IEEE80211_HW_SIGNAL_UNSPEC;
 908         dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 909         dev->queues = 1;
 910         dev->max_signal = 65;
 911
 912         reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
 913         reg &= RTL818X_TX_CONF_HWVER_MASK;
 914         switch (reg) {
 915         case RTL818X_TX_CONF_R8180_ABCD:
 916                 chip_name = "RTL8180";
 917                 break;
 918         case RTL818X_TX_CONF_R8180_F:
 919                 chip_name = "RTL8180vF";
 920                 break;
 921         case RTL818X_TX_CONF_R8185_ABC:
 922                 chip_name = "RTL8185";
 923                 break;
 924         case RTL818X_TX_CONF_R8185_D:
 925                 chip_name = "RTL8185vD";
 926                 break;
 927         default:
 928                 printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
 929                        pci_name(pdev), reg >> 25);
 930                 goto err_iounmap;
 931         }
 932
 933         priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
 934         if (priv->r8185) {
 935                 priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
 936                 pci_try_set_mwi(pdev);
 937         }
 938
 939         eeprom.data = dev;
 940         eeprom.register_read = rtl8180_eeprom_register_read;
 941         eeprom.register_write = rtl8180_eeprom_register_write;
 942         if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
 943                 eeprom.width = PCI_EEPROM_WIDTH_93C66;
 944         else
 945                 eeprom.width = PCI_EEPROM_WIDTH_93C46;
 946
 947         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
 948         rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
 949         udelay(10);
 950
 951         eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
 952         eeprom_val &= 0xFF;
 953         switch (eeprom_val) {
 954         case 1: rf_name = "Intersil";
 955                 break;
 956         case 2: rf_name = "RFMD";
 957                 break;
 958         case 3: priv->rf = &sa2400_rf_ops;
 959                 break;
 960         case 4: priv->rf = &max2820_rf_ops;
 961                 break;
 962         case 5: priv->rf = &grf5101_rf_ops;
 963                 break;
 964         case 9: priv->rf = rtl8180_detect_rf(dev);
 965                 break;
 966         case 10:
 967                 rf_name = "RTL8255";
 968                 break;
 969         default:
 970                 printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
 971                        pci_name(pdev), eeprom_val);
 972                 goto err_iounmap;
 973         }
 974
 975         if (!priv->rf) {
 976                 printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
 977                        pci_name(pdev), rf_name);
 978                 goto err_iounmap;
 979         }
 980
 981         eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
 982         priv->csthreshold = eeprom_val >> 8;
 983         if (!priv->r8185) {
 984                 __le32 anaparam;
 985                 eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
 986                 priv->anaparam = le32_to_cpu(anaparam);
 987                 eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
 988         }
 989
 990         eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
 991         if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
 992                 printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
 993                        " randomly generated MAC addr\n", pci_name(pdev));
 994                 random_ether_addr(dev->wiphy->perm_addr);
 995         }
 996
 997         /* CCK TX power */
 998         for (i = 0; i < 14; i += 2) {
 999                 u16 txpwr;
1000                 eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
1001                 priv->channels[i].hw_value = txpwr & 0xFF;
1002                 priv->channels[i + 1].hw_value = txpwr >> 8;
1003         }
1004
1005         /* OFDM TX power */
1006         if (priv->r8185) {
1007                 for (i = 0; i < 14; i += 2) {
1008                         u16 txpwr;
1009                         eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
1010                         priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
1011                         priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
1012                 }
1013         }
1014
1015         rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
1016
1017         spin_lock_init(&priv->lock);
1018
1019         err = ieee80211_register_hw(dev);
1020         if (err) {
1021                 printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
1022                        pci_name(pdev));
1023                 goto err_iounmap;
1024         }
1025
1026         printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n",
1027                wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
1028                chip_name, priv->rf->name);
1029
1030         return 0;
1031
1032  err_iounmap:
1033         iounmap(priv->map);
1034
1035  err_free_dev:
1036         pci_set_drvdata(pdev, NULL);
1037         ieee80211_free_hw(dev);
1038
1039  err_free_reg:
1040         pci_release_regions(pdev);
1041         pci_disable_device(pdev);
1042         return err;
1043 }
1044
1045 static void __devexit rtl8180_remove(struct pci_dev *pdev)
1046 {
1047         struct ieee80211_hw *dev = pci_get_drvdata(pdev);
1048         struct rtl8180_priv *priv;
1049
1050         if (!dev)
1051                 return;
1052
1053         ieee80211_unregister_hw(dev);
1054
1055         priv = dev->priv;
1056
1057         pci_iounmap(pdev, priv->map);
1058         pci_release_regions(pdev);
1059         pci_disable_device(pdev);
1060         ieee80211_free_hw(dev);
1061 }
1062
1063 #ifdef CONFIG_PM
1064 static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
1065 {
1066         pci_save_state(pdev);
1067         pci_set_power_state(pdev, pci_choose_state(pdev, state));
1068         return 0;
1069 }
1070
1071 static int rtl8180_resume(struct pci_dev *pdev)
1072 {
1073         pci_set_power_state(pdev, PCI_D0);
1074         pci_restore_state(pdev);
1075         return 0;
1076 }
1077
1078 #endif /* CONFIG_PM */
1079
1080 static struct pci_driver rtl8180_driver = {
1081         .name           = KBUILD_MODNAME,
1082         .id_table       = rtl8180_table,
1083         .probe          = rtl8180_probe,
1084         .remove         = __devexit_p(rtl8180_remove),
1085 #ifdef CONFIG_PM
1086         .suspend        = rtl8180_suspend,
1087         .resume         = rtl8180_resume,
1088 #endif /* CONFIG_PM */
1089 };
1090
1091 static int __init rtl8180_init(void)
1092 {
1093         return pci_register_driver(&rtl8180_driver);
1094 }
1095
1096 static void __exit rtl8180_exit(void)
1097 {
1098         pci_unregister_driver(&rtl8180_driver);
1099 }
1100
1101 module_init(rtl8180_init);
1102 module_exit(rtl8180_exit);