#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include "drm_edid.h"
#include "drm_edid_modes.h"
static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
{
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
out_buf[0] = addr;
out_buf[1] = 0;
- if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+ if (i2c_transfer(adapter, msgs, 2) == 2) {
*val= in_buf[0];
return true;
};
static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
{
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = dvo->slave_addr,
out_buf[0] = addr;
out_buf[1] = val;
- if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+ if (i2c_transfer(adapter, &msg, 1) == 1)
return true;
return false;
static bool ch7017_init(struct intel_dvo_device *dvo,
struct i2c_adapter *adapter)
{
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
struct ch7017_priv *priv;
uint8_t val;
val != CH7019_DEVICE_ID_VALUE) {
DRM_DEBUG_KMS("ch701x not detected, got %d: from %s "
"Slave %d.\n",
- val, i2cbus->adapter.name,dvo->slave_addr);
+ val, adapter->name,dvo->slave_addr);
goto fail;
}
{
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
out_buf[0] = addr;
out_buf[1] = 0;
- if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+ if (i2c_transfer(adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!ch7xxx->quiet) {
DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
}
{
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = dvo->slave_addr,
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+ if (i2c_transfer(adapter, &msg, 1) == 1)
return true;
if (!ch7xxx->quiet) {
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
{
struct ivch_priv *priv = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[1];
u8 in_buf[2];
out_buf[0] = addr;
- if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) {
+ if (i2c_transfer(adapter, msgs, 3) == 3) {
*data = (in_buf[1] << 8) | in_buf[0];
return true;
};
if (!priv->quiet) {
DRM_DEBUG_KMS("Unable to read register 0x%02x from "
"%s:%02x.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
}
{
struct ivch_priv *priv = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[3];
struct i2c_msg msg = {
.addr = dvo->slave_addr,
out_buf[1] = data & 0xff;
out_buf[2] = data >> 8;
- if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+ if (i2c_transfer(adapter, &msg, 1) == 1)
return true;
if (!priv->quiet) {
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
{
struct sil164_priv *sil = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
out_buf[0] = addr;
out_buf[1] = 0;
- if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+ if (i2c_transfer(adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!sil->quiet) {
DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
}
{
struct sil164_priv *sil= dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = dvo->slave_addr,
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+ if (i2c_transfer(adapter, &msg, 1) == 1)
return true;
if (!sil->quiet) {
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
{
struct tfp410_priv *tfp = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
u8 out_buf[2];
u8 in_buf[2];
out_buf[0] = addr;
out_buf[1] = 0;
- if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+ if (i2c_transfer(adapter, msgs, 2) == 2) {
*ch = in_buf[0];
return true;
};
if (!tfp->quiet) {
DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
}
{
struct tfp410_priv *tfp = dvo->dev_priv;
struct i2c_adapter *adapter = dvo->i2c_bus;
- struct intel_i2c_chan *i2cbus = container_of(adapter, struct intel_i2c_chan, adapter);
uint8_t out_buf[2];
struct i2c_msg msg = {
.addr = dvo->slave_addr,
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+ if (i2c_transfer(adapter, &msg, 1) == 1)
return true;
if (!tfp->quiet) {
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
- addr, i2cbus->adapter.name, dvo->slave_addr);
+ addr, adapter->name, dvo->slave_addr);
}
return false;
/* Try to make sure MCHBAR is enabled before poking at it */
intel_setup_mchbar(dev);
+ intel_setup_gmbus(dev);
intel_opregion_setup(dev);
i915_gem_load(dev);
intel_cleanup_overlay(dev);
}
+ intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
#include "intel_bios.h"
#include "intel_ringbuffer.h"
#include <linux/io-mapping.h>
+#include <linux/i2c.h>
#include <drm/intel-gtt.h>
/* General customization:
void __iomem *regs;
+ struct intel_gmbus {
+ struct i2c_adapter adapter;
+ struct i2c_adapter *force_bitbanging;
+ int pin;
+ } *gmbus;
+
struct pci_dev *bridge_dev;
struct intel_ring_buffer render_ring;
struct intel_ring_buffer bsd_ring;
struct notifier_block lid_notifier;
- int crt_ddc_bus; /* 0 = unknown, else GPIO to use for CRT DDC */
+ int crt_ddc_pin;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
extern int i915_save_state(struct drm_device *dev);
extern int i915_restore_state(struct drm_device *dev);
+/* intel_i2c.c */
+extern int intel_setup_gmbus(struct drm_device *dev);
+extern void intel_teardown_gmbus(struct drm_device *dev);
+extern void intel_i2c_reset(struct drm_device *dev);
+
/* intel_opregion.c */
extern int intel_opregion_setup(struct drm_device *dev);
#ifdef CONFIG_ACPI
# define GPIO_DATA_VAL_IN (1 << 12)
# define GPIO_DATA_PULLUP_DISABLE (1 << 13)
-#define GMBUS0 0x5100
-#define GMBUS1 0x5104
-#define GMBUS2 0x5108
-#define GMBUS3 0x510c
-#define GMBUS4 0x5110
-#define GMBUS5 0x5120
+#define GMBUS0 0x5100 /* clock/port select */
+#define GMBUS_RATE_100KHZ (0<<8)
+#define GMBUS_RATE_50KHZ (1<<8)
+#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */
+#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */
+#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */
+#define GMBUS_PORT_DISABLED 0
+#define GMBUS_PORT_SSC 1
+#define GMBUS_PORT_VGADDC 2
+#define GMBUS_PORT_PANEL 3
+#define GMBUS_PORT_DPC 4 /* HDMIC */
+#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */
+ /* 6 reserved */
+#define GMBUS_PORT_DPD 7 /* HDMID */
+#define GMBUS_NUM_PORTS 8
+#define GMBUS1 0x5104 /* command/status */
+#define GMBUS_SW_CLR_INT (1<<31)
+#define GMBUS_SW_RDY (1<<30)
+#define GMBUS_ENT (1<<29) /* enable timeout */
+#define GMBUS_CYCLE_NONE (0<<25)
+#define GMBUS_CYCLE_WAIT (1<<25)
+#define GMBUS_CYCLE_INDEX (2<<25)
+#define GMBUS_CYCLE_STOP (4<<25)
+#define GMBUS_BYTE_COUNT_SHIFT 16
+#define GMBUS_SLAVE_INDEX_SHIFT 8
+#define GMBUS_SLAVE_ADDR_SHIFT 1
+#define GMBUS_SLAVE_READ (1<<0)
+#define GMBUS_SLAVE_WRITE (0<<0)
+#define GMBUS2 0x5108 /* status */
+#define GMBUS_INUSE (1<<15)
+#define GMBUS_HW_WAIT_PHASE (1<<14)
+#define GMBUS_STALL_TIMEOUT (1<<13)
+#define GMBUS_INT (1<<12)
+#define GMBUS_HW_RDY (1<<11)
+#define GMBUS_SATOER (1<<10)
+#define GMBUS_ACTIVE (1<<9)
+#define GMBUS3 0x510c /* data buffer bytes 3-0 */
+#define GMBUS4 0x5110 /* interrupt mask (Pineview+) */
+#define GMBUS_SLAVE_TIMEOUT_EN (1<<4)
+#define GMBUS_NAK_EN (1<<3)
+#define GMBUS_IDLE_EN (1<<2)
+#define GMBUS_HW_WAIT_EN (1<<1)
+#define GMBUS_HW_RDY_EN (1<<0)
+#define GMBUS5 0x5120 /* byte index */
+#define GMBUS_2BYTE_INDEX_EN (1<<31)
/*
* Clock control & power management
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
- /* I2C state */
- intel_i2c_reset_gmbus(dev);
+ intel_i2c_reset(dev);
return 0;
}
-
struct bdb_header *bdb)
{
struct bdb_general_definitions *general;
- const int crt_bus_map_table[] = {
- GPIOB,
- GPIOA,
- GPIOC,
- GPIOD,
- GPIOE,
- GPIOF,
- };
general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (general) {
if (block_size >= sizeof(*general)) {
int bus_pin = general->crt_ddc_gmbus_pin;
DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
- if ((bus_pin >= 1) && (bus_pin <= 6)) {
- dev_priv->crt_ddc_bus =
- crt_bus_map_table[bus_pin-1];
- }
+ if (bus_pin >= 1 && bus_pin <= 6)
+ dev_priv->crt_ddc_pin = bus_pin - 1;
} else {
DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
block_size);
struct bdb_header *bdb = NULL;
u8 __iomem *bios = NULL;
+ dev_priv->crt_ddc_pin = GMBUS_PORT_VGADDC;
+
/* XXX Should this validation be moved to intel_opregion.c? */
if (dev_priv->opregion.vbt) {
struct vbt_header *vbt = dev_priv->opregion.vbt;
static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
{
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+ struct drm_i915_private *dev_priv = encoder->dev->dev_private;
/* CRT should always be at 0, but check anyway */
if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
return false;
- return intel_ddc_probe(intel_encoder);
+ return intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin);
}
static enum drm_connector_status
static int intel_crt_get_modes(struct drm_connector *connector)
{
- struct intel_encoder *encoder = intel_attached_encoder(connector);
- struct i2c_adapter *ddc_bus;
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
- ret = intel_ddc_get_modes(connector, encoder->ddc_bus);
+ ret = intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
if (ret || !IS_G4X(dev))
- goto end;
+ return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- ddc_bus = intel_i2c_create(encoder, GPIOD, "CRTDDC_D");
- if (!ddc_bus) {
- dev_printk(KERN_ERR, &connector->dev->pdev->dev,
- "DDC bus registration failed for CRTDDC_D.\n");
- goto end;
- }
- /* Try to get modes by GPIOD port */
- ret = intel_ddc_get_modes(connector, ddc_bus);
- intel_i2c_destroy(ddc_bus);
-
-end:
- return ret;
-
+ return intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
}
static int intel_crt_set_property(struct drm_connector *connector,
struct intel_encoder *intel_encoder;
struct intel_connector *intel_connector;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 i2c_reg;
intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
if (!intel_encoder)
intel_connector_attach_encoder(intel_connector, intel_encoder);
- /* Set up the DDC bus. */
- if (HAS_PCH_SPLIT(dev))
- i2c_reg = PCH_GPIOA;
- else {
- i2c_reg = GPIOA;
- /* Use VBT information for CRT DDC if available */
- if (dev_priv->crt_ddc_bus != 0)
- i2c_reg = dev_priv->crt_ddc_bus;
- }
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- i2c_reg, "CRTDDC_A");
- if (!intel_encoder->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
- "failed.\n");
- drm_connector_cleanup(&intel_connector->base);
- kfree(intel_connector);
- drm_encoder_cleanup(&intel_encoder->base);
- kfree(intel_encoder);
- return;
- }
-
intel_encoder->type = INTEL_OUTPUT_ANALOG;
intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT) |
{
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
- if (intel_encoder->ddc_bus)
- intel_i2c_destroy(intel_encoder->ddc_bus);
-
- if (intel_encoder->i2c_bus)
- intel_i2c_destroy(intel_encoder->i2c_bus);
-
drm_encoder_cleanup(encoder);
kfree(intel_encoder);
}
/* We should parse the EDID data and find out if it has an audio sink
*/
- ret = intel_ddc_get_modes(connector, intel_dp->base.ddc_bus);
+ ret = intel_ddc_get_modes(connector, &intel_dp->adapter);
if (ret) {
if ((IS_eDP(intel_dp) || IS_PCH_eDP(intel_dp)) &&
!dev_priv->panel_fixed_mode) {
intel_dp_i2c_init(intel_dp, intel_connector, name);
- intel_encoder->ddc_bus = &intel_dp->adapter;
intel_encoder->hot_plug = intel_dp_hot_plug;
if (output_reg == DP_A || IS_PCH_eDP(intel_dp)) {
#define __INTEL_DRV_H__
#include <linux/i2c.h>
-#include <linux/i2c-id.h>
-#include <linux/i2c-algo-bit.h>
#include "i915_drv.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK) >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
}
-struct intel_i2c_chan {
- struct intel_encoder *encoder;
- u32 reg; /* GPIO reg */
- struct i2c_adapter adapter;
- struct i2c_algo_bit_data algo;
-};
-
struct intel_framebuffer {
struct drm_framebuffer base;
struct drm_gem_object *obj;
struct intel_encoder {
struct drm_encoder base;
int type;
- struct i2c_adapter *i2c_bus;
- struct i2c_adapter *ddc_bus;
bool load_detect_temp;
bool needs_tv_clock;
void (*hot_plug)(struct intel_encoder *);
bool enable_stall_check;
};
-struct i2c_adapter *intel_i2c_create(struct intel_encoder *encoder,
- const u32 reg,
- const char *name);
-void intel_i2c_destroy(struct i2c_adapter *adapter);
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
-extern bool intel_ddc_probe(struct intel_encoder *intel_encoder);
-void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
-void intel_i2c_reset_gmbus(struct drm_device *dev);
+extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus);
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
.name = "ch7017",
.dvo_reg = DVOC,
.slave_addr = 0x75,
- .gpio = GPIOE,
+ .gpio = GMBUS_PORT_DPD,
.dev_ops = &ch7017_ops,
}
};
struct intel_encoder base;
struct intel_dvo_device dev;
+ int ddc_bus;
struct drm_display_mode *panel_fixed_mode;
bool panel_wants_dither;
static int intel_dvo_get_modes(struct drm_connector *connector)
{
struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
/* We should probably have an i2c driver get_modes function for those
* devices which will have a fixed set of modes determined by the chip
* (TV-out, for example), but for now with just TMDS and LVDS,
* that's not the case.
*/
- intel_ddc_get_modes(connector, intel_dvo->base.ddc_bus);
+ intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[intel_dvo->ddc_bus].adapter);
if (!list_empty(&connector->probed_modes))
return 1;
void intel_dvo_init(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
struct intel_dvo *intel_dvo;
struct intel_connector *intel_connector;
- struct i2c_adapter *i2cbus = NULL;
int ret = 0;
int i;
int encoder_type = DRM_MODE_ENCODER_NONE;
&intel_dvo_enc_funcs, encoder_type);
/* Set up the DDC bus */
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- GPIOD, "DVODDC_D");
- if (!intel_encoder->ddc_bus)
- goto free_intel;
+ intel_dvo->ddc_bus = GMBUS_PORT_DPB;
/* Now, try to find a controller */
for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
struct drm_connector *connector = &intel_connector->base;
const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
+ struct i2c_adapter *i2c;
int gpio;
/* Allow the I2C driver info to specify the GPIO to be used in
if (dvo->gpio != 0)
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
- gpio = GPIOB;
+ gpio = GMBUS_PORT_PANEL;
else
- gpio = GPIOE;
+ gpio = GMBUS_PORT_DPD;
/* Set up the I2C bus necessary for the chip we're probing.
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- if (i2cbus != NULL)
- intel_i2c_destroy(i2cbus);
- i2cbus = intel_i2c_create(intel_encoder, gpio,
- gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E");
- if (i2cbus == NULL)
- continue;
+ i2c = &dev_priv->gmbus[gpio].adapter;
intel_dvo->dev = *dvo;
- ret = dvo->dev_ops->init(&intel_dvo->dev, i2cbus);
+ ret = dvo->dev_ops->init(&intel_dvo->dev, i2c);
if (!ret)
continue;
return;
}
- intel_i2c_destroy(intel_encoder->ddc_bus);
- /* Didn't find a chip, so tear down. */
- if (i2cbus != NULL)
- intel_i2c_destroy(i2cbus);
-free_intel:
drm_encoder_cleanup(&intel_encoder->base);
kfree(intel_dvo);
kfree(intel_connector);
struct intel_hdmi {
struct intel_encoder base;
u32 sdvox_reg;
+ int ddc_bus;
bool has_hdmi_sink;
};
intel_hdmi_detect(struct drm_connector *connector)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
- struct edid *edid = NULL;
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ struct edid *edid;
enum drm_connector_status status = connector_status_disconnected;
intel_hdmi->has_hdmi_sink = false;
- edid = drm_get_edid(connector, intel_hdmi->base.ddc_bus);
+ edid = drm_get_edid(connector,
+ &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
static int intel_hdmi_get_modes(struct drm_connector *connector)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
/* We should parse the EDID data and find out if it's an HDMI sink so
* we can send audio to it.
*/
- return intel_ddc_get_modes(connector, intel_hdmi->base.ddc_bus);
+ return intel_ddc_get_modes(connector,
+ &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
}
static void intel_hdmi_destroy(struct drm_connector *connector)
/* Set up the DDC bus. */
if (sdvox_reg == SDVOB) {
intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- GPIOE, "HDMIB");
+ intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- GPIOD, "HDMIC");
+ intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- PCH_GPIOE, "HDMIB");
+ intel_hdmi->ddc_bus = GMBUS_PORT_DPB;
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
intel_encoder->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- PCH_GPIOD, "HDMIC");
+ intel_hdmi->ddc_bus = GMBUS_PORT_DPC;
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
intel_encoder->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- PCH_GPIOF, "HDMID");
+ intel_hdmi->ddc_bus = GMBUS_PORT_DPD;
dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
}
- if (!intel_encoder->ddc_bus)
- goto err_connector;
intel_hdmi->sdvox_reg = sdvox_reg;
u32 temp = I915_READ(PEG_BAND_GAP_DATA);
I915_WRITE(PEG_BAND_GAP_DATA, (temp & ~0xf) | 0xd);
}
-
- return;
-
-err_connector:
- drm_encoder_cleanup(&intel_encoder->base);
- drm_connector_cleanup(connector);
- kfree(intel_hdmi);
- kfree(intel_connector);
-
- return;
}
/*
* Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
- * Copyright © 2006-2008 Intel Corporation
+ * Copyright © 2006-2008,2010 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
*
* Authors:
* Eric Anholt <eric@anholt.net>
+ * Chris Wilson <chris@chris-wilson.co.uk>
*/
#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
-void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+/* Intel GPIO access functions */
+
+#define I2C_RISEFALL_TIME 20
+
+struct intel_gpio {
+ struct i2c_adapter adapter;
+ struct i2c_algo_bit_data algo;
+ struct drm_i915_private *dev_priv;
+ u32 reg;
+};
+
+void
+intel_i2c_reset(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ if (HAS_PCH_SPLIT(dev))
+ I915_WRITE(PCH_GMBUS0, 0);
+ else
+ I915_WRITE(GMBUS0, 0);
+}
+
+static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)
+{
u32 val;
/* When using bit bashing for I2C, this bit needs to be set to 1 */
- if (!IS_PINEVIEW(dev))
+ if (!IS_PINEVIEW(dev_priv->dev))
return;
val = I915_READ(DSPCLK_GATE_D);
I915_WRITE(DSPCLK_GATE_D, val);
}
-/*
- * Intel GPIO access functions
- */
-
-#define I2C_RISEFALL_TIME 20
-
-static inline struct drm_i915_private *
-get_dev_priv(struct intel_i2c_chan *chan)
-{
- return chan->encoder->base.dev->dev_private;
-}
-
static int get_clock(void *data)
{
- struct intel_i2c_chan *chan = data;
- struct drm_i915_private *dev_priv = get_dev_priv(chan);
- return (I915_READ(chan->reg) & GPIO_CLOCK_VAL_IN) != 0;
+ struct intel_gpio *gpio = data;
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
+ return (I915_READ(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0;
}
static int get_data(void *data)
{
- struct intel_i2c_chan *chan = data;
- struct drm_i915_private *dev_priv = get_dev_priv(chan);
- return (I915_READ(chan->reg) & GPIO_DATA_VAL_IN) != 0;
+ struct intel_gpio *gpio = data;
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
+ return (I915_READ(gpio->reg) & GPIO_DATA_VAL_IN) != 0;
}
static void set_clock(void *data, int state_high)
{
- struct intel_i2c_chan *chan = data;
- struct drm_i915_private *dev_priv = get_dev_priv(chan);
+ struct intel_gpio *gpio = data;
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
struct drm_device *dev = dev_priv->dev;
u32 reserved = 0, clock_bits;
/* On most chips, these bits must be preserved in software. */
if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+ reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
GPIO_CLOCK_PULLUP_DISABLE);
if (state_high)
else
clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
GPIO_CLOCK_VAL_MASK;
- I915_WRITE(chan->reg, reserved | clock_bits);
- POSTING_READ(chan->reg);
+
+ I915_WRITE(gpio->reg, reserved | clock_bits);
+ POSTING_READ(gpio->reg);
}
static void set_data(void *data, int state_high)
{
- struct intel_i2c_chan *chan = data;
- struct drm_i915_private *dev_priv = get_dev_priv(chan);
+ struct intel_gpio *gpio = data;
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
struct drm_device *dev = dev_priv->dev;
u32 reserved = 0, data_bits;
/* On most chips, these bits must be preserved in software. */
if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+ reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
GPIO_CLOCK_PULLUP_DISABLE);
if (state_high)
data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
GPIO_DATA_VAL_MASK;
- I915_WRITE(chan->reg, reserved | data_bits);
- POSTING_READ(chan->reg);
+ I915_WRITE(gpio->reg, reserved | data_bits);
+ POSTING_READ(gpio->reg);
}
-/* Clears the GMBUS setup. Our driver doesn't make use of the GMBUS I2C
- * engine, but if the BIOS leaves it enabled, then that can break our use
- * of the bit-banging I2C interfaces. This is notably the case with the
- * Mac Mini in EFI mode.
- */
-void
-intel_i2c_reset_gmbus(struct drm_device *dev)
+static struct i2c_adapter *
+intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
+ static const int map_pin_to_reg[] = {
+ 0,
+ GPIOB,
+ GPIOA,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ };
+ struct intel_gpio *gpio;
- if (HAS_PCH_SPLIT(dev))
- I915_WRITE(PCH_GMBUS0, 0);
- else
- I915_WRITE(GMBUS0, 0);
-}
+ if (pin < 1 || pin > 7)
+ return NULL;
-/**
- * intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
- * @dev: DRM device
- * @output: driver specific output device
- * @reg: GPIO reg to use
- * @name: name for this bus
- * @slave_addr: slave address (if fixed)
- *
- * Creates and registers a new i2c bus with the Linux i2c layer, for use
- * in output probing and control (e.g. DDC or SDVO control functions).
- *
- * Possible values for @reg include:
- * %GPIOA
- * %GPIOB
- * %GPIOC
- * %GPIOD
- * %GPIOE
- * %GPIOF
- * %GPIOG
- * %GPIOH
- * see PRM for details on how these different busses are used.
- */
-struct i2c_adapter *intel_i2c_create(struct intel_encoder *encoder,
- const u32 reg,
- const char *name)
-{
- struct intel_i2c_chan *chan;
- struct drm_device *dev = encoder->base.dev;
+ gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);
+ if (gpio == NULL)
+ return NULL;
- chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL);
- if (!chan)
- goto out_free;
+ gpio->reg = map_pin_to_reg[pin];
+ if (HAS_PCH_SPLIT(dev_priv->dev))
+ gpio->reg += PCH_GPIOA - GPIOA;
+ gpio->dev_priv = dev_priv;
- chan->encoder = encoder;
- chan->reg = reg;
- snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
- chan->adapter.owner = THIS_MODULE;
- chan->adapter.algo_data = &chan->algo;
- chan->adapter.dev.parent = &dev->pdev->dev;
- chan->algo.setsda = set_data;
- chan->algo.setscl = set_clock;
- chan->algo.getsda = get_data;
- chan->algo.getscl = get_clock;
- chan->algo.udelay = I2C_RISEFALL_TIME;
- chan->algo.timeout = usecs_to_jiffies(2200);
- chan->algo.data = chan;
-
- i2c_set_adapdata(&chan->adapter, chan);
-
- if (i2c_bit_add_bus(&chan->adapter))
+ snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO %d", pin);
+ gpio->adapter.owner = THIS_MODULE;
+ gpio->adapter.algo_data = &gpio->algo;
+ gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
+ gpio->algo.setsda = set_data;
+ gpio->algo.setscl = set_clock;
+ gpio->algo.getsda = get_data;
+ gpio->algo.getscl = get_clock;
+ gpio->algo.udelay = I2C_RISEFALL_TIME;
+ gpio->algo.timeout = usecs_to_jiffies(2200);
+ gpio->algo.data = gpio;
+
+ if (i2c_bit_add_bus(&gpio->adapter))
goto out_free;
- intel_i2c_reset_gmbus(dev);
+ intel_i2c_reset(dev_priv->dev);
/* JJJ: raise SCL and SDA? */
- intel_i2c_quirk_set(dev, true);
- set_data(chan, 1);
+ intel_i2c_quirk_set(dev_priv, true);
+ set_data(gpio, 1);
udelay(I2C_RISEFALL_TIME);
- set_clock(chan, 1);
+ set_clock(gpio, 1);
udelay(I2C_RISEFALL_TIME);
- intel_i2c_quirk_set(dev, false);
+ intel_i2c_quirk_set(dev_priv, false);
- return &chan->adapter;
+ return &gpio->adapter;
out_free:
- kfree(chan);
+ kfree(gpio);
return NULL;
}
+static int
+quirk_i2c_transfer(struct drm_i915_private *dev_priv,
+ struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret;
+
+ intel_i2c_reset(dev_priv->dev);
+
+ intel_i2c_quirk_set(dev_priv, true);
+ ret = i2c_transfer(adapter, msgs, num);
+ intel_i2c_quirk_set(dev_priv, false);
+
+ return ret;
+}
+
+static int
+gmbus_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct intel_gmbus *bus = container_of(adapter,
+ struct intel_gmbus,
+ adapter);
+ struct drm_i915_private *dev_priv = adapter->algo_data;
+ int i, speed, reg_offset;
+
+ if (bus->force_bitbanging)
+ return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+
+ reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
+
+ speed = GMBUS_RATE_100KHZ;
+ if (INTEL_INFO(dev_priv->dev)->gen > 4 || IS_G4X(dev_priv->dev)) {
+ if (bus->pin == GMBUS_PORT_DPB) /* SDVO only? */
+ speed = GMBUS_RATE_1MHZ;
+ else
+ speed = GMBUS_RATE_400KHZ;
+ }
+ I915_WRITE(GMBUS0 + reg_offset, speed | bus->pin);
+
+ for (i = 0; i < num; i++) {
+ u16 len = msgs[i].len;
+ u8 *buf = msgs[i].buf;
+
+ if (msgs[i].flags & I2C_M_RD) {
+ I915_WRITE(GMBUS1 + reg_offset,
+ GMBUS_CYCLE_WAIT | (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |
+ (len << GMBUS_BYTE_COUNT_SHIFT) |
+ (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+ do {
+ u32 val, loop = 0;
+
+ if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+ goto timeout;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return 0;
+
+ val = I915_READ(GMBUS3 + reg_offset);
+ do {
+ *buf++ = val & 0xff;
+ val >>= 8;
+ } while (--len && ++loop < 4);
+ } while (len);
+ } else {
+ u32 val = 0, loop = 0;
+
+ BUG_ON(msgs[i].len > 4);
+
+ do {
+ val |= *buf++ << (loop*8);
+ } while (--len && +loop < 4);
+
+ I915_WRITE(GMBUS3 + reg_offset, val);
+ I915_WRITE(GMBUS1 + reg_offset,
+ (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT ) |
+ (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
+ (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
+ GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+ }
+
+ if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
+ goto timeout;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return 0;
+ }
+
+ return num;
+
+timeout:
+ DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d\n", bus->pin);
+ /* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
+ bus->force_bitbanging = intel_gpio_create(dev_priv, bus->pin);
+ if (!bus->force_bitbanging)
+ return -ENOMEM;
+
+ return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+}
+
+static u32 gmbus_func(struct i2c_adapter *adapter)
+{
+ return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ /* I2C_FUNC_10BIT_ADDR | */
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL);
+}
+
+static const struct i2c_algorithm gmbus_algorithm = {
+ .master_xfer = gmbus_xfer,
+ .functionality = gmbus_func
+};
+
/**
- * intel_i2c_destroy - unregister and free i2c bus resources
- * @output: channel to free
- *
- * Unregister the adapter from the i2c layer, then free the structure.
+ * intel_gmbus_setup - instantiate all Intel i2c GMBuses
+ * @dev: DRM device
*/
-void intel_i2c_destroy(struct i2c_adapter *adapter)
+int intel_setup_gmbus(struct drm_device *dev)
+{
+ static const char *names[] = {
+ "disabled",
+ "ssc",
+ "vga",
+ "panel",
+ "dpc",
+ "dpb",
+ "dpd",
+ "reserved"
+ };
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret, i;
+
+ dev_priv->gmbus = kcalloc(sizeof(struct intel_gmbus), GMBUS_NUM_PORTS,
+ GFP_KERNEL);
+ if (dev_priv->gmbus == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+ struct intel_gmbus *bus = &dev_priv->gmbus[i];
+
+ bus->adapter.owner = THIS_MODULE;
+ bus->adapter.class = I2C_CLASS_DDC;
+ snprintf(bus->adapter.name,
+ I2C_NAME_SIZE,
+ "gmbus %s",
+ names[i]);
+
+ bus->adapter.dev.parent = &dev->pdev->dev;
+ bus->adapter.algo_data = dev_priv;
+
+ bus->adapter.algo = &gmbus_algorithm;
+ ret = i2c_add_adapter(&bus->adapter);
+ if (ret)
+ goto err;
+
+ bus->pin = i;
+ }
+
+ intel_i2c_reset(dev_priv->dev);
+
+ return 0;
+
+err:
+ while (--i) {
+ struct intel_gmbus *bus = &dev_priv->gmbus[i];
+ i2c_del_adapter(&bus->adapter);
+ }
+ kfree(dev_priv->gmbus);
+ dev_priv->gmbus = NULL;
+ return ret;
+}
+
+void intel_teardown_gmbus(struct drm_device *dev)
{
- struct intel_i2c_chan *chan;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
- if (!adapter)
+ if (dev_priv->gmbus == NULL)
return;
- chan = container_of(adapter,
- struct intel_i2c_chan,
- adapter);
- i2c_del_adapter(&chan->adapter);
- kfree(chan);
+ for (i = 0; i < GMBUS_NUM_PORTS; i++) {
+ struct intel_gmbus *bus = &dev_priv->gmbus[i];
+ if (bus->force_bitbanging) {
+ i2c_del_adapter(bus->force_bitbanging);
+ kfree(bus->force_bitbanging);
+ }
+ i2c_del_adapter(&bus->adapter);
+ }
+
+ kfree(dev_priv->gmbus);
+ dev_priv->gmbus = NULL;
}
{
struct intel_lvds *intel_lvds = intel_attached_lvds(connector);
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *mode;
if (intel_lvds->edid_good) {
int ret = intel_ddc_get_modes(connector,
- intel_lvds->base.ddc_bus);
+ &dev_priv->gmbus[GMBUS_PORT_PANEL].adapter);
if (ret)
return ret;
}
* if closed, act like it's not there for now
*/
- /* Set up the DDC bus. */
- intel_encoder->ddc_bus = intel_i2c_create(intel_encoder,
- gpio, "LVDSDDC_C");
- if (!intel_encoder->ddc_bus) {
- dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
- "failed.\n");
- goto failed;
- }
-
/*
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
intel_lvds->edid_good = true;
- if (!intel_ddc_get_modes(connector, intel_encoder->ddc_bus))
+ if (!intel_ddc_get_modes(connector, &dev_priv->gmbus[GMBUS_PORT_PANEL].adapter))
intel_lvds->edid_good = false;
if (!intel_lvds->edid_good) {
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
- if (intel_encoder->ddc_bus)
- intel_i2c_destroy(intel_encoder->ddc_bus);
drm_connector_cleanup(connector);
drm_encoder_cleanup(encoder);
kfree(intel_lvds);
/*
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
- * Copyright (c) 2007 Intel Corporation
+ * Copyright (c) 2007, 2010 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* intel_ddc_probe
*
*/
-bool intel_ddc_probe(struct intel_encoder *intel_encoder)
+bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
{
+ struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
u8 out_buf[] = { 0x0, 0x0};
u8 buf[2];
- int ret;
struct i2c_msg msgs[] = {
{
.addr = 0x50,
}
};
- intel_i2c_quirk_set(intel_encoder->base.dev, true);
- ret = i2c_transfer(intel_encoder->ddc_bus, msgs, 2);
- intel_i2c_quirk_set(intel_encoder->base.dev, false);
- if (ret == 2)
- return true;
-
- return false;
+ return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
}
/**
struct edid *edid;
int ret = 0;
- intel_i2c_quirk_set(connector->dev, true);
edid = drm_get_edid(connector, adapter);
- intel_i2c_quirk_set(connector->dev, false);
if (edid) {
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
struct intel_sdvo {
struct intel_encoder base;
+ struct i2c_adapter *i2c;
u8 slave_addr;
/* Register for the SDVO device: SDVOB or SDVOC */
};
int ret;
- if ((ret = i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 2)) == 2)
+ if ((ret = i2c_transfer(intel_sdvo->i2c, msgs, 2)) == 2)
{
*ch = buf[0];
return true;
}
};
- return i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 1) == 1;
+ return i2c_transfer(intel_sdvo->i2c, msgs, 1) == 1;
}
#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
ret_value[0] = 0;
ret_value[1] = 0;
- ret = i2c_transfer(intel_sdvo->base.i2c_bus, msgs, 3);
+ ret = i2c_transfer(intel_sdvo->i2c, msgs, 3);
if (ret < 0)
return ret;
if (ret != 3) {
return (caps > 1);
}
+static struct edid *
+intel_sdvo_get_edid(struct drm_connector *connector, int ddc)
+{
+ struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
+ int ret;
+
+ ret = intel_sdvo_set_control_bus_switch(intel_sdvo, ddc);
+ if (ret)
+ return NULL;
+
+ return drm_get_edid(connector, intel_sdvo->i2c);
+}
+
static struct drm_connector *
intel_find_analog_connector(struct drm_device *dev)
{
static struct edid *
intel_sdvo_get_analog_edid(struct drm_connector *connector)
{
- struct intel_encoder *encoder = intel_attached_encoder(connector);
- struct drm_device *dev = connector->dev;
- struct i2c_adapter *ddc;
- struct edid *edid;
- u32 ddc_reg;
-
- if (!intel_analog_is_connected(dev))
- return NULL;
-
- if (HAS_PCH_SPLIT(dev))
- ddc_reg = PCH_GPIOA;
- else
- ddc_reg = GPIOA;
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
- ddc = intel_i2c_create(encoder, ddc_reg, "SDVO/VGA DDC BUS");
- if (ddc == NULL)
+ if (!intel_analog_is_connected(connector->dev))
return NULL;
- edid = drm_get_edid(connector, ddc);
- intel_i2c_destroy(ddc);
-
- return edid;
+ return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
}
enum drm_connector_status
enum drm_connector_status status;
struct edid *edid;
- edid = drm_get_edid(connector, intel_sdvo->base.ddc_bus);
+ edid = intel_sdvo_get_edid(connector, intel_sdvo->ddc_bus);
if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) {
- u8 saved_ddc = intel_sdvo->ddc_bus, ddc;
+ u8 ddc;
/*
* Don't use the 1 as the argument of DDC bus switch to get
* the EDID. It is used for SDVO SPD ROM.
*/
for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) {
- intel_sdvo->ddc_bus = ddc;
- edid = drm_get_edid(connector, intel_sdvo->base.ddc_bus);
- if (edid)
+ edid = intel_sdvo_get_edid(connector, ddc);
+ if (edid) {
+ /*
+ * If we found the EDID on the other bus,
+ * assume that is the correct DDC bus.
+ */
+ intel_sdvo->ddc_bus = ddc;
break;
+ }
}
-
- /*
- * If we found the EDID on the other bus, maybe that is the
- * correct DDC bus.
- */
- if (edid == NULL)
- intel_sdvo->ddc_bus = saved_ddc;
}
/*
{
struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
struct edid *edid;
- int num_modes;
/* set the bus switch and get the modes */
- num_modes = intel_ddc_get_modes(connector, intel_sdvo->base.ddc_bus);
- if (num_modes)
- return;
+ edid = intel_sdvo_get_edid(connector, intel_sdvo->ddc_bus);
/*
* Mac mini hack. On this device, the DVI-I connector shares one DDC
* DDC fails, check to see if the analog output is disconnected, in
* which case we'll look there for the digital DDC data.
*/
- edid = intel_sdvo_get_analog_edid(connector);
+ if (edid == NULL)
+ edid = intel_sdvo_get_analog_edid(connector);
+
if (edid != NULL) {
drm_mode_connector_update_edid_property(connector, edid);
drm_add_edid_modes(connector, edid);
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(connector, intel_sdvo->base.ddc_bus);
+ intel_ddc_get_modes(connector, intel_sdvo->i2c);
if (list_empty(&connector->probed_modes) == false)
goto end;
&intel_sdvo->is_hdmi, 1);
}
-static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg msgs[], int num)
-{
- struct intel_sdvo *intel_sdvo;
- const struct i2c_algorithm *algo;
- int ret;
-
- intel_sdvo = container_of(i2c_adap->algo_data,
- struct intel_sdvo,
- base);
- algo = intel_sdvo->base.i2c_bus->algo;
-
- ret = intel_sdvo_set_control_bus_switch(intel_sdvo,
- intel_sdvo->ddc_bus);
- if (ret)
- return ret;
-
- return algo->master_xfer(i2c_adap, msgs, num);
-}
-
-static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
- .master_xfer = intel_sdvo_master_xfer,
-};
-
static u8
intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
struct intel_sdvo *intel_sdvo;
- u8 ch[0x40];
int i;
- u32 i2c_reg, ddc_reg;
intel_sdvo = kzalloc(sizeof(struct intel_sdvo), GFP_KERNEL);
if (!intel_sdvo)
/* encoder type will be decided later */
drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
- if (HAS_PCH_SPLIT(dev)) {
- i2c_reg = PCH_GPIOE;
- ddc_reg = PCH_GPIOE;
- } else {
- i2c_reg = GPIOE;
- ddc_reg = GPIOE;
- }
-
- /* setup the DDC bus. */
- if (IS_SDVOB(sdvo_reg))
- intel_encoder->i2c_bus =
- intel_i2c_create(intel_encoder,
- i2c_reg, "SDVOCTRL_E for SDVOB");
- else
- intel_encoder->i2c_bus =
- intel_i2c_create(intel_encoder,
- i2c_reg, "SDVOCTRL_E for SDVOC");
-
- if (!intel_encoder->i2c_bus)
- goto err_inteloutput;
+ intel_sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg);
- /* Save the bit-banging i2c functionality for use by the DDC wrapper */
- intel_sdvo_i2c_bit_algo.functionality = intel_encoder->i2c_bus->algo->functionality;
-
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
- if (!intel_sdvo_read_byte(intel_sdvo, i, &ch[i])) {
+ u8 byte;
+
+ if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) {
DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
IS_SDVOB(sdvo_reg) ? 'B' : 'C');
- goto err_i2c;
+ goto err;
}
}
- /* setup the DDC bus. */
- if (IS_SDVOB(sdvo_reg)) {
- intel_encoder->ddc_bus =
- intel_i2c_create(intel_encoder,
- ddc_reg, "SDVOB DDC BUS");
+ if (IS_SDVOB(sdvo_reg))
dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
- } else {
- intel_encoder->ddc_bus =
- intel_i2c_create(intel_encoder,
- ddc_reg, "SDVOC DDC BUS");
+ else
dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
- }
- if (intel_encoder->ddc_bus == NULL)
- goto err_i2c;
-
- /* Wrap with our custom algo which switches to DDC mode */
- intel_encoder->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
/* In default case sdvo lvds is false */
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
- goto err_i2c;
+ goto err;
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
IS_SDVOB(sdvo_reg) ? 'B' : 'C');
- goto err_i2c;
+ goto err;
}
intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg);
/* Set the input timing to the screen. Assume always input 0. */
if (!intel_sdvo_set_target_input(intel_sdvo))
- goto err_i2c;
+ goto err;
if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo,
&intel_sdvo->pixel_clock_min,
&intel_sdvo->pixel_clock_max))
- goto err_i2c;
+ goto err;
DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, "
"clock range %dMHz - %dMHz, "
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
return true;
-err_i2c:
- if (intel_encoder->ddc_bus != NULL)
- intel_i2c_destroy(intel_encoder->ddc_bus);
- if (intel_encoder->i2c_bus != NULL)
- intel_i2c_destroy(intel_encoder->i2c_bus);
-err_inteloutput:
+err:
drm_encoder_cleanup(&intel_encoder->base);
kfree(intel_sdvo);
projects / linux-flexiantxendom0-natty.git / commitdiff