--- /dev/null
+/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C Platform - GPIO pin configuration helper definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This is meant for core cpu support, machine or other driver files
+ * should not be including this header.
+ */
+
+#ifndef __PLAT_GPIO_CFG_HELPERS_H
+#define __PLAT_GPIO_CFG_HELPERS_H __FILE__
+
+/* As a note, all gpio configuration functions are entered exclusively, either
+ * with the relevant lock held or the system prevented from doing anything else
+ * by disabling interrupts.
+*/
+
+static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int config)
+{
+ return (chip->config->set_config)(chip, off, config);
+}
+
+static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return (chip->config->set_pull)(chip, off, pull);
+}
+
+/**
+ * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ * 00 = input
+ * 01 = output
+ * 1x = special function
+*/
+extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+*/
+extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+/**
+ * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependant on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
++ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+*/
+extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg);
+
+
+/* Pull-{up,down} resistor controls.
+ *
+ * S3C2410,S3C2440,S3C24A0 = Pull-UP,
+ * S3C2412,S3C2413 = Pull-Down
+ * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
+ * S3C2443 = Pull-Both [not same as S3C6400]
+ */
+
+/**
+ * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-up resistor.
+ */
+extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none
+ * @chip: The gpio chip that is being configured
+ * @off: The offset for the GPIO being configured
+ * @param: pull: The pull mode being requested
+ *
+ * This is a helper function for the case where we have GPIOs with one
+ * bit configuring the presence of a pull-down resistor.
+ */
+extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = No pull resistor connected
+ * 01 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ */
+extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+
+/**
+ * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+/**
+ * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @param: pull: The pull mode being requested.
+ *
+ * This is a helper function for the case where we have GPIOs with two
+ * bits configuring the presence of a pull resistor, in the following
+ * order:
+ * 00 = Pull-up resistor connected
+ * 10 = Pull-down resistor connected
+ * x1 = No pull up resistor
+ */
+extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull);
+
+/**
+ * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors
+ * @chip: The gpio chip that the GPIO pin belongs to.
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-{up,down} resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_upown.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
+#endif /* __PLAT_GPIO_CFG_HELPERS_H */
+
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/nand.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
- * S3C2410 - NAND device controller platfrom_device info
++ * S3C2410 - NAND device controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/**
+ * struct s3c2410_nand_set - define a set of one or more nand chips
+ * @disable_ecc: Entirely disable ECC - Dangerous
+ * @flash_bbt: Openmoko u-boot can create a Bad Block Table
+ * Setting this flag will allow the kernel to
+ * look for it at boot time and also skip the NAND
+ * scan.
+ * @options: Default value to set into 'struct nand_chip' options.
+ * @nr_chips: Number of chips in this set
+ * @nr_partitions: Number of partitions pointed to by @partitions
+ * @name: Name of set (optional)
+ * @nr_map: Map for low-layer logical to physical chip numbers (option)
+ * @partitions: The mtd partition list
+ *
+ * define a set of one or more nand chips registered with an unique mtd. Also
+ * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger
+ * a warning at boot time.
+ */
+struct s3c2410_nand_set {
+ unsigned int disable_ecc:1;
+ unsigned int flash_bbt:1;
+
+ unsigned int options;
+ int nr_chips;
+ int nr_partitions;
+ char *name;
+ int *nr_map;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecc_layout;
+};
+
+struct s3c2410_platform_nand {
+ /* timing information for controller, all times in nanoseconds */
+
+ int tacls; /* time for active CLE/ALE to nWE/nOE */
+ int twrph0; /* active time for nWE/nOE */
+ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
+
+ unsigned int ignore_unset_ecc:1;
+
+ int nr_sets;
+ struct s3c2410_nand_set *sets;
+
+ void (*select_chip)(struct s3c2410_nand_set *,
+ int chip);
+};
+
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C - USB2.0 Highspeed/OtG device PHY registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
- /* Note, this is a seperate header file as some of the clock framework
++/* Note, this is a separate header file as some of the clock framework
+ * needs to touch this if the clk_48m is used as the USB OHCI or other
+ * peripheral source.
+*/
+
+#ifndef __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H
+#define __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H __FILE__
+
+/* S3C64XX_PA_USB_HSPHY */
+
+#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
+
+#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
+#define SRC_PHYPWR_OTG_DISABLE (1 << 4)
+#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
+
+#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
+#define S3C_PHYCLK_MODE_USB11 (1 << 6)
+#define S3C_PHYCLK_EXT_OSC (1 << 5)
+#define S3C_PHYCLK_CLK_FORCE (1 << 4)
+#define S3C_PHYCLK_ID_PULL (1 << 2)
+#define S3C_PHYCLK_CLKSEL_MASK (0x3 << 0)
+#define S3C_PHYCLK_CLKSEL_SHIFT (0)
+#define S3C_PHYCLK_CLKSEL_48M (0x0 << 0)
+#define S3C_PHYCLK_CLKSEL_12M (0x2 << 0)
+#define S3C_PHYCLK_CLKSEL_24M (0x3 << 0)
+
+#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
+#define S3C_RSTCON_PHYCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 2)
+#define S3C_RSTCON_PHY (1 << 0)
+
+#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
+
+#endif /* __PLAT_S3C64XX_REGS_USB_HSOTG_PHY_H */
projects / linux-flexiantxendom0-natty.git / commitdiff