S: Maintained
F: arch/arm/mach-s5p*/
+ARM/SAMSUNG MOBILE MACHINE SUPPORT
+M: Kyungmin Park <kyungmin.park@samsung.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-s5pv210/mach-aquila.c
+F: arch/arm/mach-s5pv210/mach-goni.c
+F: arch/arm/mach-exynos4/mach-universal_c210.c
+F: arch/arm/mach-exynos4/mach-nuri.c
+
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
F: Documentation/hwmon/jc42
JFS FILESYSTEM
-M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
+M: Dave Kleikamp <shaggy@kernel.org>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
RAPIDIO SUBSYSTEM
M: Matt Porter <mporter@kernel.crashing.org>
+M: Alexandre Bounine <alexandre.bounine@idt.com>
S: Maintained
F: drivers/rapidio/
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 38
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
+ unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
titan_update_irq_hw(titan_cached_irq_mask);
config ARM_VIC_NR
int
+ default 4 if ARCH_S5PV210
+ default 3 if ARCH_S5P6442 || ARCH_S5PC100
default 2
depends on ARM_VIC
help
struct sys_timer;
struct machine_desc {
- /*
- * Note! The first two elements are used
- * by assembler code in head.S, head-common.S
- */
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
#ifndef _ASMARM_PGALLOC_H
#define _ASMARM_PGALLOC_H
+#include <linux/pagemap.h>
+
#include <asm/domain.h>
#include <asm/pgtable-hwdef.h>
#include <asm/processor.h>
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *info)
{
- int i;
+ int i, cpu = smp_processor_id();
+ u32 dbg_power;
+ cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
*/
if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
/*
+ * Ensure sticky power-down is clear (i.e. debug logic is
+ * powered up).
+ */
+ asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 0) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(cpumask, cpumask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
* Unconditionally clear the lock by writing a value
* other than 0xC5ACCE55 to the access register.
*/
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
+ cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, NULL, 1);
+ on_each_cpu(reset_ctrl_regs, &cpumask, 1);
+ if (!cpumask_empty(&cpumask)) {
+ core_num_brps = 0;
+ core_num_reserved_brps = 0;
+ core_num_wrps = 0;
+ return 0;
+ }
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
while (!(arch_ctrl.len & 0x1))
arch_ctrl.len >>= 1;
- if (idx & 0x1)
- reg = encode_ctrl_reg(arch_ctrl);
- else
+ if (num & 0x1)
reg = bp->attr.bp_addr;
+ else
+ reg = encode_ctrl_reg(arch_ctrl);
}
put:
return ret;
}
-static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+static int davinci_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
.resource = da850_mcasp_resources,
};
+struct platform_device davinci_pcm_device = {
+ .name = "davinci-pcm-audio",
+ .id = -1,
+};
+
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
+ platform_device_register(&davinci_pcm_device);
+
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(®s->enable, gpio);
+ gpio_reg_set_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_clear_bit(®s->enable, gpio);
+ gpio_reg_clear_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
spin_lock_irqsave(&ctlr->lock, flags);
- gpio_reg_set_bit(®s->direction, gpio);
+ gpio_reg_set_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(®s->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(®s->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
- gpio_reg_clear_bit(®s->direction, gpio);
+ gpio_reg_clear_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
unsigned gpio = chip->base + offset;
int ret;
- ret = gpio_reg_get_bit(®s->data_in, gpio);
+ ret = gpio_reg_get_bit(regs->data_in, gpio);
return ret ? 1 : 0;
}
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
- gpio_reg_set_bit(®s->data_out, gpio);
+ gpio_reg_set_bit(regs->data_out, gpio);
else
- gpio_reg_clear_bit(®s->data_out, gpio);
+ gpio_reg_clear_bit(regs->data_out, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
+struct clk;
+
static inline int __clk_get(struct clk *clk)
{
return 1;
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
- u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
- l = mbox_read_reg(p->irqdisable);
- l &= ~bit;
- mbox_write_reg(l, p->irqdisable);
+ u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
+
+ if (!cpu_is_omap44xx())
+ bit = mbox_read_reg(p->irqdisable) & ~bit;
+
+ mbox_write_reg(bit, p->irqdisable);
}
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
+ kfree(name);
kfree(sr_info);
return ret;
}
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_release_region;
}
}
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir)
- return -EINVAL;
+ if (!vdd_dbg_dir) {
+ ret = -EINVAL;
+ goto err_release_region;
+ }
dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
- return PTR_ERR(dbg_dir);
+ ret = PTR_ERR(dbg_dir);
+ goto err_release_region;
}
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir,
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
- return PTR_ERR(nvalue_dir);
+ ret = PTR_ERR(nvalue_dir);
+ goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
- return -ENODATA;
+ ret = -ENODATA;
+ goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
- char *name;
- char volt_name[32];
-
- name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to allocate memory"
- " for n-value directory name\n", __func__);
- return -ENOMEM;
- }
+ char name[NVALUE_NAME_LEN + 1];
- strcpy(name, "volt_");
- sprintf(volt_name, "%d", volt_data[i].volt_nominal);
- strcat(name, volt_name);
+ snprintf(name, sizeof(name), "volt_%d",
+ volt_data[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
&pxa25x_device_assp,
&pxa25x_device_pwm0,
&pxa25x_device_pwm1,
+ &pxa_device_asoc_platform,
};
static struct sys_device pxa25x_sysdev[] = {
goto err_rfk_alloc;
}
- rfkill_set_led_trigger_name(rfk, "tosa-bt");
-
rc = rfkill_register(rfk);
if (rc)
goto err_rfkill;
.dev.platform_data = &sharpsl_rom_data,
};
+static struct platform_device wm9712_device = {
+ .name = "wm9712-codec",
+ .id = -1,
+};
+
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosaled_device,
&tosa_bt_device,
&sharpsl_rom_device,
+ &wm9712_device,
};
static void tosa_poweroff(void)
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
-#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
-#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
+#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
+#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
+#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
+#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
+#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
+#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
+#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
}, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
+ }, {
.name = "iis",
.id = 0,
.parent = &clk_p,
regptr = regs + PL080_Cx_BASE(0);
- for (ch = 0; ch < 8; ch++, chno++, chptr++) {
- printk(KERN_INFO "%s: registering DMA %d (%p)\n",
- __func__, chno, regptr);
+ for (ch = 0; ch < 8; ch++, chptr++) {
+ pr_debug("%s: registering DMA %d (%p)\n",
+ __func__, chno + ch, regptr);
chptr->bit = 1 << ch;
- chptr->number = chno;
+ chptr->number = chno + ch;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL080_Cx_STRIDE;
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
- printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+ printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
+ irq, regs, chno, chno+8);
return 0;
.get_pull = s3c_gpio_getpull_updown,
};
-int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
},
};
-int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
- .name = "PVDD_UH/PVDD_MMC",
+ .name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
- .name = "PVDD_INT/PVDD_PLL",
+ .name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
- .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
- .name = "PVDD_OTGI/HPVDD/AVDD",
+ .name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
- .name = "PVDD_MEM/PVDD_GPS",
+ .name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
- .name = "PVDD_LCD/PVDD_EXT",
+ .name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
- s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
#define S5P6440_GPIO_A_NR (6)
#define S5P6440_GPIO_B_NR (7)
#define S5P6440_GPIO_C_NR (8)
-#define S5P6440_GPIO_F_NR (2)
+#define S5P6440_GPIO_F_NR (16)
#define S5P6440_GPIO_G_NR (7)
#define S5P6440_GPIO_H_NR (10)
#define S5P6440_GPIO_I_NR (16)
#define S5P6450_GPIO_B_NR (7)
#define S5P6450_GPIO_C_NR (8)
#define S5P6450_GPIO_D_NR (8)
-#define S5P6450_GPIO_F_NR (2)
+#define S5P6450_GPIO_F_NR (16)
#define S5P6450_GPIO_G_NR (14)
#define S5P6450_GPIO_H_NR (10)
#define S5P6450_GPIO_I_NR (16)
gpio_direction_output(GPIO_PORT217, 0);
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
+ mdelay(100);
/* LCD backlight controller */
gpio_request(GPIO_PORT235, NULL); /* RESET */
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
- lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].clock_divider = 3;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
.lcd_cfg = mackerel_lcdc_modes,
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
.interface_type = RGB24,
- .clock_divider = 2,
+ .clock_divider = 3,
.flags = 0,
.lcd_size_cfg.width = 152,
.lcd_size_cfg.height = 91,
};
enum { MSTP001,
- MSTP125, MSTP118, MSTP116, MSTP100,
+ MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
+ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
+ [MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
+ [MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
+ [MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
CLKDEV_CON_ID("r_clk", &r_clk),
/* DIV6 clocks */
+ CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+ CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+ CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
- CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
+ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
+ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
- CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
-DD 0x01001000, 0x01001000
-
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
-ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
WAIT 1, 0xFE40009C
+LIST "SUB/USBClk"
+ED 0xE6150080, 0x00000180
+
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
-WAIT 10, 0xFE40009C
+WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
WAIT 1, 0xFE40009C
-ED 0xE6150354, 0x00000002
+ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <plat/devs.h>
+
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {
.align 2
ENTRY(_outsl)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
.Llong_loop_s: R0 = [P1++];
.Llong_loop_e: [P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsl)
ENTRY(_outsw)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
.Lword_loop_s: R0 = W[P1++];
.Lword_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw)
ENTRY(_outsb)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
.Lbyte_loop_s: R0 = B[P1++];
.Lbyte_loop_e: B[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsb)
ENTRY(_outsw_8)
+ CC = R2 == 0;
+ IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
R0 = R0 << 8;
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
- RTS;
+1: RTS;
ENDPROC(_outsw_8)
1:
.ifeqs "\flushins", BROK_FLUSH_INST
\flushins [P0++];
+ nop;
+ nop;
2: nop;
.else
2: \flushins [P0++];
//
//----------------------------------------------------------------------------
#include <linux/cache.h>
+#include <linux/threads.h>
#include <asm/types.h>
#include <asm/mmu.h>
+/*
+ * We only have to have statically allocated lppaca structs on
+ * legacy iSeries, which supports at most 64 cpus.
+ */
+#ifdef CONFIG_PPC_ISERIES
+#if NR_CPUS < 64
+#define NR_LPPACAS NR_CPUS
+#else
+#define NR_LPPACAS 64
+#endif
+#else /* not iSeries */
+#define NR_LPPACAS 1
+#endif
+
+
/* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k
* alignment is sufficient to prevent this */
struct lppaca {
#ifdef CONFIG_PPC_BOOK3S
/*
- * We only have to have statically allocated lppaca structs on
- * legacy iSeries, which supports at most 64 cpus.
- */
-#ifdef CONFIG_PPC_ISERIES
-#if NR_CPUS < 64
-#define NR_LPPACAS NR_CPUS
-#else
-#define NR_LPPACAS 64
-#endif
-#else /* not iSeries */
-#define NR_LPPACAS 1
-#endif
-
-/*
* The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
{
int rc = 0;
- if (firmware_has_feature(FW_FEATURE_VPHN) &&
+ /* Disabled until races with load balancing are fixed */
+ if (0 && firmware_has_feature(FW_FEATURE_VPHN) &&
get_lppaca()->shared_proc) {
vphn_enabled = 1;
setup_cpu_associativity_change_counters();
pft_size[0] = 0; /* NUMA CEC cookie, 0 for non NUMA */
pft_size[1] = __ilog2(HvCallHpt_getHptPages() * HW_PAGE_SIZE);
- for (i = 0; i < NR_CPUS; i++) {
- if (lppaca_of(i).dyn_proc_status >= 2)
+ for (i = 0; i < NR_LPPACAS; i++) {
+ if (lppaca[i].dyn_proc_status >= 2)
continue;
snprintf(p, 32 - (p - buf), "@%d", i);
dt_prop_str(dt, "device_type", device_type_cpu);
- index = lppaca_of(i).dyn_hv_phys_proc_index;
+ index = lppaca[i].dyn_hv_phys_proc_index;
d = &xIoHriProcessorVpd[index];
dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024);
* on but calling this function multiple times is fine.
*/
identify_cpu(0, mfspr(SPRN_PVR));
+ initialise_paca(&boot_paca, 0);
powerpc_firmware_features |= FW_FEATURE_ISERIES;
powerpc_firmware_features |= FW_FEATURE_LPAR;
#include <asm-generic/sections.h>
-extern void __nosave_begin, __nosave_end;
+extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
#include <linux/io.h>
#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
-#include <asm/machtypes.h>
+#include <generated/machtypes.h>
static struct resource rtc_resources[] = {
[0] = {
void __init plat_early_device_setup(void)
{
+ struct platform_device *dev[1];
+
if (mach_is_rts7751r2d()) {
scif_platform_data.scscr |= SCSCR_CKE1;
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
} else {
- early_platform_add_devices(&sci_device, 1);
- early_platform_add_devices(&scif_device, 1);
+ dev[0] = &sci_device;
+ early_platform_add_devices(dev, 1);
+ dev[0] = &scif_device;
+ early_platform_add_devices(dev, 1);
}
early_platform_add_devices(sh7750_early_devices,
void __delay(unsigned long loops)
{
__asm__ __volatile__(
+ /*
+ * ST40-300 appears to have an issue with this code,
+ * normally taking two cycles each loop, as with all
+ * other SH variants. If however the branch and the
+ * delay slot straddle an 8 byte boundary, this increases
+ * to 3 cycles.
+ * This align directive ensures this doesn't occur.
+ */
+ ".balign 8\n\t"
+
"tst %0, %0\n\t"
"1:\t"
"bf/s 1b\n\t"
kunmap_atomic(vfrom, KM_USER0);
}
- if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+ if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
+ (vma->vm_flags & VM_EXEC))
__flush_purge_region(vto, PAGE_SIZE);
kunmap_atomic(vto, KM_USER1);
if (fseek(f, -4L, SEEK_END)) {
perror(argv[1]);
}
- fread(&olen, sizeof olen, 1, f);
+
+ if (fread(&olen, sizeof(olen), 1, f) != 1) {
+ perror(argv[1]);
+ return 1;
+ }
+
ilen = ftell(f);
olen = getle32(&olen);
fclose(f);
struct bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
- unsigned int base_dest_nodeid:15; /* nasid (pnode<<1) of */
+ unsigned int base_dest_nodeid:15; /* nasid of the */
/* bits 20:6 */ /* first bit in uvhub map */
unsigned int command:8; /* message type */
/* bits 28:21 */
cmd_incomplete:
iowrite16(0, &pcch_hdr->status);
spin_unlock(&pcc_lock);
- return -EINVAL;
+ return 0;
}
static int pcc_cpufreq_target(struct cpufreq_policy *policy,
int physnid;
int nid = NUMA_NO_NODE;
- apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
- if (apicid != BAD_APICID)
- nid = apicid_to_node[apicid];
- if (nid == NUMA_NO_NODE)
- nid = early_cpu_to_node(cpu);
+ nid = early_cpu_to_node(cpu);
BUG_ON(nid == NUMA_NO_NODE || !node_online(nid));
/*
memset(bd2, 0, sizeof(struct bau_desc));
bd2->header.sw_ack_flag = 1;
/*
- * base_dest_nodeid is the nasid (pnode<<1) of the first uvhub
+ * base_dest_nodeid is the nasid of the first uvhub
* in the partition. The bit map will indicate uvhub numbers,
* which are 0-N in a partition. Pnodes are unique system-wide.
*/
- bd2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
+ bd2->header.base_dest_nodeid = UV_PNODE_TO_NASID(uv_partition_base_pnode);
bd2->header.dest_subnodeid = 0x10; /* the LB */
bd2->header.command = UV_NET_ENDPOINT_INTD;
bd2->header.int_both = 1;
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
+ /*
+ * last_timeout_jiffies is updated here to avoid
+ * smi_timeout() handler passing very large time_diff
+ * value to smi_event_handler() that causes
+ * the send command to abort.
+ */
+ smi_info->last_timeout_jiffies = jiffies;
+
mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
if (smi_info->thread)
unsigned int len;
int ret;
+ if (!port->portdev) {
+ /* Device has been unplugged. vqs are already gone. */
+ return;
+ }
vq = port->in_vq;
if (port->inbuf)
buf = port->inbuf;
void *buf;
unsigned int len;
+ if (!port->portdev) {
+ /* Device has been unplugged. vqs are already gone. */
+ return;
+ }
while ((buf = virtqueue_get_buf(port->out_vq, &len))) {
kfree(buf);
port->outvq_full = false;
struct drm_crtc_helper_funcs *crtc_funcs;
u16 *red, *green, *blue, *transp;
struct drm_crtc *crtc;
- int i, rc = 0;
+ int i, j, rc = 0;
int start;
for (i = 0; i < fb_helper->crtc_count; i++) {
transp = cmap->transp;
start = cmap->start;
- for (i = 0; i < cmap->len; i++) {
+ for (j = 0; j < cmap->len; j++) {
u16 hred, hgreen, hblue, htransp = 0xffff;
hred = *red++;
int max_freq;
/* RPSTAT1 is in the GT power well */
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
seq_printf(m, "RPSTAT1: 0x%08x\n", I915_READ(GEN6_RPSTAT1));
seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
max_freq * 100);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
} else {
seq_printf(m, "no P-state info available\n");
}
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0600);
+unsigned int i915_semaphores = 0;
+module_param_named(semaphores, i915_semaphores, int, 0600);
+
unsigned int i915_enable_rc6 = 0;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
}
}
-void __gen6_force_wake_get(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
int count;
udelay(10);
}
-void __gen6_force_wake_put(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE, 0);
POSTING_READ(FORCEWAKE);
}
+void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
+{
+ int loop = 500;
+ u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+ while (fifo < 20 && loop--) {
+ udelay(10);
+ fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
+ }
+}
+
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern unsigned int i915_semaphores;
extern unsigned int i915_lvds_downclock;
extern unsigned int i915_panel_use_ssc;
extern unsigned int i915_enable_rc6;
void i915_gem_free_all_phys_object(struct drm_device *dev);
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
+uint32_t
+i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
+
/* i915_gem_gtt.c */
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj);
* must be set to prevent GT core from power down and stale values being
* returned.
*/
-void __gen6_force_wake_get(struct drm_i915_private *dev_priv);
-void __gen6_force_wake_put (struct drm_i915_private *dev_priv);
-static inline u32 i915_safe_read(struct drm_i915_private *dev_priv, u32 reg)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
+
+static inline u32 i915_gt_read(struct drm_i915_private *dev_priv, u32 reg)
{
u32 val;
if (dev_priv->info->gen >= 6) {
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
val = I915_READ(reg);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
} else
val = I915_READ(reg);
return val;
}
+static inline void i915_gt_write(struct drm_i915_private *dev_priv,
+ u32 reg, u32 val)
+{
+ if (dev_priv->info->gen >= 6)
+ __gen6_gt_wait_for_fifo(dev_priv);
+ I915_WRITE(reg, val);
+}
+
static inline void
i915_write(struct drm_i915_private *dev_priv, u32 reg, u64 val, int len)
{
* Return the required GTT alignment for an object, only taking into account
* unfenced tiled surface requirements.
*/
-static uint32_t
+uint32_t
i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj)
{
struct drm_device *dev = obj->base.dev;
if (from == NULL || to == from)
return 0;
- /* XXX gpu semaphores are currently causing hard hangs on SNB mobile */
- if (INTEL_INFO(obj->base.dev)->gen < 6 || IS_MOBILE(obj->base.dev))
+ /* XXX gpu semaphores are implicated in various hard hangs on SNB */
+ if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores)
return i915_gem_object_wait_rendering(obj, true);
idx = intel_ring_sync_index(from, to);
static bool
i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode)
{
- int tile_width, tile_height;
+ int tile_width;
/* Linear is always fine */
if (tiling_mode == I915_TILING_NONE)
}
}
- if (IS_GEN2(dev) ||
- (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
- tile_height = 32;
- else
- tile_height = 8;
- /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even
- * number of tile rows. */
- if (IS_GEN2(dev))
- tile_height *= 2;
-
- /* Size needs to be aligned to a full tile row */
- if (size & (tile_height * stride - 1))
- return false;
-
/* 965+ just needs multiples of tile width */
if (INTEL_INFO(dev)->gen >= 4) {
if (stride & (tile_width - 1))
(obj->gtt_offset + obj->base.size <= dev_priv->mm.gtt_mappable_end &&
i915_gem_object_fence_ok(obj, args->tiling_mode));
- obj->tiling_changed = true;
- obj->tiling_mode = args->tiling_mode;
- obj->stride = args->stride;
+ /* Rebind if we need a change of alignment */
+ if (!obj->map_and_fenceable) {
+ u32 unfenced_alignment =
+ i915_gem_get_unfenced_gtt_alignment(obj);
+ if (obj->gtt_offset & (unfenced_alignment - 1))
+ ret = i915_gem_object_unbind(obj);
+ }
+
+ if (ret == 0) {
+ obj->tiling_changed = true;
+ obj->tiling_mode = args->tiling_mode;
+ obj->stride = args->stride;
+ }
}
+ /* we have to maintain this existing ABI... */
+ args->stride = obj->stride;
+ args->tiling_mode = obj->tiling_mode;
drm_gem_object_unreference(&obj->base);
mutex_unlock(&dev->struct_mutex);
- return 0;
+ return ret;
}
/**
/* Backlight control */
#define BLC_PWM_CTL 0x61254
+#define BACKLIGHT_MODULATION_FREQ_SHIFT (17)
#define BLC_PWM_CTL2 0x61250 /* 965+ only */
+#define BLM_COMBINATION_MODE (1 << 30)
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
+ */
+#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17)
+#define BLM_LEGACY_MODE (1 << 16)
/*
* This is the number of cycles out of the backlight modulation cycle for which
* the backlight is on.
#define FORCEWAKE 0xA18C
#define FORCEWAKE_ACK 0x130090
+#define GT_FIFO_FREE_ENTRIES 0x120008
+
#define GEN6_RPNSWREQ 0xA008
#define GEN6_TURBO_DISABLE (1<<31)
#define GEN6_FREQUENCY(x) ((x)<<25)
u32 blt_ecoskpd;
/* Make sure blitter notifies FBC of writes */
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
GEN6_BLITTER_LOCK_SHIFT;
GEN6_BLITTER_LOCK_SHIFT);
I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
POSTING_READ(GEN6_BLITTER_ECOSKPD);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
}
static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* enable all PM interrupts */
I915_WRITE(GEN6_PMINTRMSK, 0);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
}
void intel_enable_clock_gating(struct drm_device *dev)
#include "intel_drv.h"
+#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
+
void
intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
struct drm_display_mode *adjusted_mode)
dev_priv->pch_pf_size = (width << 16) | height;
}
+static int is_backlight_combination_mode(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (INTEL_INFO(dev)->gen >= 4)
+ return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE;
+
+ if (IS_GEN2(dev))
+ return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE;
+
+ return 0;
+}
+
static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
{
u32 val;
if (INTEL_INFO(dev)->gen < 4)
max &= ~1;
}
+
+ if (is_backlight_combination_mode(dev))
+ max *= 0xff;
}
DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max);
val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
if (IS_PINEVIEW(dev))
val >>= 1;
+
+ if (is_backlight_combination_mode(dev)){
+ u8 lbpc;
+
+ val &= ~1;
+ pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
+ val *= lbpc;
+ }
}
DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
if (HAS_PCH_SPLIT(dev))
return intel_pch_panel_set_backlight(dev, level);
+
+ if (is_backlight_combination_mode(dev)){
+ u32 max = intel_panel_get_max_backlight(dev);
+ u8 lbpc;
+
+ lbpc = level * 0xfe / max + 1;
+ level /= lbpc;
+ pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc);
+ }
+
tmp = I915_READ(BLC_PWM_CTL);
if (IS_PINEVIEW(dev)) {
tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
struct drm_i915_gem_object *obj;
};
-#define I915_RING_READ(reg) i915_safe_read(dev_priv, reg)
+#define I915_RING_READ(reg) i915_gt_read(dev_priv, reg)
+#define I915_RING_WRITE(reg, val) i915_gt_write(dev_priv, reg, val)
#define I915_READ_TAIL(ring) I915_RING_READ(RING_TAIL((ring)->mmio_base))
-#define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val)
+#define I915_WRITE_TAIL(ring, val) I915_RING_WRITE(RING_TAIL((ring)->mmio_base), val)
#define I915_READ_START(ring) I915_RING_READ(RING_START((ring)->mmio_base))
-#define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val)
+#define I915_WRITE_START(ring, val) I915_RING_WRITE(RING_START((ring)->mmio_base), val)
#define I915_READ_HEAD(ring) I915_RING_READ(RING_HEAD((ring)->mmio_base))
-#define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val)
+#define I915_WRITE_HEAD(ring, val) I915_RING_WRITE(RING_HEAD((ring)->mmio_base), val)
#define I915_READ_CTL(ring) I915_RING_READ(RING_CTL((ring)->mmio_base))
-#define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val)
+#define I915_WRITE_CTL(ring, val) I915_RING_WRITE(RING_CTL((ring)->mmio_base), val)
-#define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_IMR(ring) I915_RING_READ(RING_IMR((ring)->mmio_base))
+#define I915_WRITE_IMR(ring, val) I915_RING_WRITE(RING_IMR((ring)->mmio_base), val)
#define I915_READ_NOPID(ring) I915_RING_READ(RING_NOPID((ring)->mmio_base))
#define I915_READ_SYNC_0(ring) I915_RING_READ(RING_SYNC_0((ring)->mmio_base))
return ret;
/* NV_MEMORY_TO_MEMORY_FORMAT requires a notifier object */
- ret = nouveau_notifier_alloc(chan, NvNotify0, 32, &chan->m2mf_ntfy);
+ ret = nouveau_notifier_alloc(chan, NvNotify0, 32, 0xfd0, 0x1000,
+ &chan->m2mf_ntfy);
if (ret)
return ret;
extern int nouveau_notifier_init_channel(struct nouveau_channel *);
extern void nouveau_notifier_takedown_channel(struct nouveau_channel *);
extern int nouveau_notifier_alloc(struct nouveau_channel *, uint32_t handle,
- int cout, uint32_t *offset);
+ int cout, uint32_t start, uint32_t end,
+ uint32_t *offset);
extern int nouveau_notifier_offset(struct nouveau_gpuobj *, uint32_t *);
extern int nouveau_ioctl_notifier_alloc(struct drm_device *, void *data,
struct drm_file *);
ret = vram->get(dev, mem->num_pages << PAGE_SHIFT,
mem->page_alignment << PAGE_SHIFT, size_nc,
(nvbo->tile_flags >> 8) & 0xff, &node);
- if (ret)
- return ret;
+ if (ret) {
+ mem->mm_node = NULL;
+ return (ret == -ENOSPC) ? 0 : ret;
+ }
node->page_shift = 12;
if (nvbo->vma.node)
return 0;
}
- return -ENOMEM;
+ return -ENOSPC;
}
int
int
nouveau_notifier_alloc(struct nouveau_channel *chan, uint32_t handle,
- int size, uint32_t *b_offset)
+ int size, uint32_t start, uint32_t end,
+ uint32_t *b_offset)
{
struct drm_device *dev = chan->dev;
struct nouveau_gpuobj *nobj = NULL;
uint32_t offset;
int target, ret;
- mem = drm_mm_search_free(&chan->notifier_heap, size, 0, 0);
+ mem = drm_mm_search_free_in_range(&chan->notifier_heap, size, 0,
+ start, end, 0);
if (mem)
- mem = drm_mm_get_block(mem, size, 0);
+ mem = drm_mm_get_block_range(mem, size, 0, start, end);
if (!mem) {
NV_ERROR(dev, "Channel %d notifier block full\n", chan->id);
return -ENOMEM;
if (IS_ERR(chan))
return PTR_ERR(chan);
- ret = nouveau_notifier_alloc(chan, na->handle, na->size, &na->offset);
+ ret = nouveau_notifier_alloc(chan, na->handle, na->size, 0, 0x1000,
+ &na->offset);
nouveau_channel_put(&chan);
return ret;
}
void
nv50_instmem_flush(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x00330c, 0x00000001);
if (!nv_wait(dev, 0x00330c, 0x00000002, 0x00000000))
NV_ERROR(dev, "PRAMIN flush timeout\n");
+ spin_unlock(&dev_priv->ramin_lock);
}
void
nv84_instmem_flush(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x070000, 0x00000001);
if (!nv_wait(dev, 0x070000, 0x00000002, 0x00000000))
NV_ERROR(dev, "PRAMIN flush timeout\n");
+ spin_unlock(&dev_priv->ramin_lock);
}
void
nv50_vm_flush_engine(struct drm_device *dev, int engine)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ spin_lock(&dev_priv->ramin_lock);
nv_wr32(dev, 0x100c80, (engine << 16) | 1);
if (!nv_wait(dev, 0x100c80, 0x00000001, 0x00000000))
NV_ERROR(dev, "vm flush timeout: engine %d\n", engine);
+ spin_unlock(&dev_priv->ramin_lock);
}
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/ktime.h>
+#include <linux/slab.h>
#define PCH_EVENT_SET 0 /* I2C Interrupt Event Set Status */
#define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear Status */
static int ocores_i2c_of_probe(struct platform_device* pdev,
struct ocores_i2c* i2c)
{
- __be32* val;
+ const __be32* val;
val = of_get_property(pdev->dev.of_node, "regstep", NULL);
if (!val) {
* REVISIT: Some wkup sources might not be needed.
*/
dev->westate = OMAP_I2C_WE_ALL;
- if (dev->rev < OMAP_I2C_REV_ON_4430)
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
- dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
}
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
#define TDA8290_ID 0x89
u8 reg = 0x1f, id;
struct i2c_msg msg_read[] = {
- { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® },
- { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id },
+ { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
+ { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
/* detect tda8290 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n",
+ printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}
#define TDA8295C2_ID 0x8b
u8 reg = 0x2f, id;
struct i2c_msg msg_read[] = {
- { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® },
- { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id },
+ { .addr = i2c_props->addr, .flags = 0, .len = 1, .buf = ® },
+ { .addr = i2c_props->addr, .flags = I2C_M_RD, .len = 1, .buf = &id },
};
- /* detect tda8290 */
+ /* detect tda8295 */
if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) {
- printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n",
+ printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
__func__, reg);
return -ENODEV;
}
return 0;
}
+static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index,
+ u16 pid, int onoff)
+{
+ struct dib0700_state *st = adapter->dev->priv;
+ if (st->is_dib7000pc)
+ return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
+ return dib7000m_pid_filter(adapter->fe, index, pid, onoff);
+}
+
+static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ struct dib0700_state *st = adapter->dev->priv;
+ if (st->is_dib7000pc)
+ return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
+ return dib7000m_pid_filter_ctrl(adapter->fe, onoff);
+}
+
static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
{
return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
{
.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 32,
- .pid_filter = stk70x0p_pid_filter,
- .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
+ .pid_filter = stk7700p_pid_filter,
+ .pid_filter_ctrl = stk7700p_pid_filter_ctrl,
.frontend_attach = stk7700p_frontend_attach,
.tuner_attach = stk7700p_tuner_attach,
}
/* Default firmware for LME2510C */
-const char lme_firmware[50] = "dvb-usb-lme2510c-s7395.fw";
+char lme_firmware[50] = "dvb-usb-lme2510c-s7395.fw";
static void lme_coldreset(struct usb_device *dev)
{
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = lme2510_download_firmware,
- .firmware = lme_firmware,
+ .firmware = (const char *)&lme_firmware,
.size_of_priv = sizeof(struct lme2510_state),
.num_adapters = 1,
.adapter = {
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.74");
+MODULE_VERSION("1.75");
MODULE_LICENSE("GPL");
}
EXPORT_SYMBOL(dib7000m_get_i2c_master);
+int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ u16 val = dib7000m_read_word(state, 294 + state->reg_offs) & 0xffef;
+ val |= (onoff & 0x1) << 4;
+ dprintk("PID filter enabled %d", onoff);
+ return dib7000m_write_word(state, 294 + state->reg_offs, val);
+}
+EXPORT_SYMBOL(dib7000m_pid_filter_ctrl);
+
+int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+ struct dib7000m_state *state = fe->demodulator_priv;
+ dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff);
+ return dib7000m_write_word(state, 300 + state->reg_offs + id,
+ onoff ? (1 << 13) | pid : 0);
+}
+EXPORT_SYMBOL(dib7000m_pid_filter);
+
#if 0
/* used with some prototype boards */
int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods,
extern struct i2c_adapter *dib7000m_get_i2c_master(struct dvb_frontend *,
enum dibx000_i2c_interface,
int);
+extern int dib7000m_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
+extern int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
#else
static inline
struct dvb_frontend *dib7000m_attach(struct i2c_adapter *i2c_adap,
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
+static inline int dib7000m_pid_filter(struct dvb_frontend *fe, u8 id,
+ u16 pid, u8 onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
+
+static inline int dib7000m_pid_filter_ctrl(struct dvb_frontend *fe,
+ uint8_t onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
#endif
/* TODO
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <asm/io.h>
-#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/kmod.h>
#include <linux/vmalloc.h>
{
ktime_t now;
s64 delta; /* ns */
- struct ir_raw_event ev;
+ DEFINE_IR_RAW_EVENT(ev);
int rc = 0;
if (!dev->raw)
* being called for the first time, note that delta can't
* possibly be negative.
*/
- ev.duration = 0;
if (delta > IR_MAX_DURATION || !dev->raw->last_type)
type |= IR_START_EVENT;
else
MCE_GEN2_TX_INV,
POLARIS_EVK,
CX_HYBRID_TV,
+ MULTIFUNCTION,
};
struct mceusb_model {
u32 mce_gen2:1;
u32 mce_gen3:1;
u32 tx_mask_normal:1;
- u32 is_polaris:1;
u32 no_tx:1;
+ int ir_intfnum;
+
const char *rc_map; /* Allow specify a per-board map */
const char *name; /* per-board name */
};
.tx_mask_normal = 1,
},
[POLARIS_EVK] = {
- .is_polaris = 1,
/*
* In fact, the EVK is shipped without
* remotes, but we should have something handy,
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
[CX_HYBRID_TV] = {
- .is_polaris = 1,
.no_tx = 1, /* tx isn't wired up at all */
.name = "Conexant Hybrid TV (cx231xx) MCE IR",
},
+ [MULTIFUNCTION] = {
+ .mce_gen2 = 1,
+ .ir_intfnum = 2,
+ },
};
static struct usb_device_id mceusb_dev_table[] = {
{ USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
/* Philips/Spinel plus IR transceiver for ASUS */
{ USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
- /* Realtek MCE IR Receiver */
- { USB_DEVICE(VENDOR_REALTEK, 0x0161) },
+ /* Realtek MCE IR Receiver and card reader */
+ { USB_DEVICE(VENDOR_REALTEK, 0x0161),
+ .driver_info = MULTIFUNCTION },
/* SMK/Toshiba G83C0004D410 */
{ USB_DEVICE(VENDOR_SMK, 0x031d),
.driver_info = MCE_GEN2_TX_INV },
bool is_gen3;
bool is_microsoft_gen1;
bool tx_mask_normal;
- bool is_polaris;
+ int ir_intfnum;
dev_dbg(&intf->dev, "%s called\n", __func__);
is_gen3 = mceusb_model[model].mce_gen3;
is_microsoft_gen1 = mceusb_model[model].mce_gen1;
tx_mask_normal = mceusb_model[model].tx_mask_normal;
- is_polaris = mceusb_model[model].is_polaris;
+ ir_intfnum = mceusb_model[model].ir_intfnum;
- if (is_polaris) {
- /* Interface 0 is IR */
- if (idesc->desc.bInterfaceNumber)
- return -ENODEV;
- }
+ /* There are multi-function devices with non-IR interfaces */
+ if (idesc->desc.bInterfaceNumber != ir_intfnum)
+ return -ENODEV;
/* step through the endpoints to find first bulk in and out endpoint */
for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
{
- /* set number of bytes needed for wake key comparison (default 67) */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
+ /* set number of bytes needed for wake from s3 (default 65) */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_CMP_BYTES,
+ CIR_WAKE_FIFO_CMP_DEEP);
/* set tolerance/variance allowed per byte during wake compare */
nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20
#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10
-/* CIR Wake FIFO buffer is 67 bytes long */
-#define CIR_WAKE_FIFO_LEN 67
+/*
+ * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes
+ * the system comparing only 65 bytes (fails with this set to 67)
+ */
+#define CIR_WAKE_FIFO_CMP_BYTES 65
/* CIR Wake byte comparison tolerance */
#define CIR_WAKE_CMP_TOLERANCE 5
count++;
} else {
for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+ if (!strcasecmp(tmp, proto_names[i].name)) {
tmp += strlen(proto_names[i].name);
mask = proto_names[i].type;
break;
if (rc < 0)
return rc;
- return videobuf_reqbufs(&fh->vb_vidq, rb);
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ rc = videobuf_reqbufs(&fh->vb_vidq, rb);
+ else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ rc = videobuf_reqbufs(&fh->vb_vbiq, rb);
+
+ return rc;
}
static int vidioc_querybuf(struct file *file, void *priv,
if (rc < 0)
return rc;
- return videobuf_querybuf(&fh->vb_vidq, b);
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ rc = videobuf_querybuf(&fh->vb_vidq, b);
+ else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ rc = videobuf_querybuf(&fh->vb_vbiq, b);
+
+ return rc;
}
static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
if (rc < 0)
return rc;
- return videobuf_qbuf(&fh->vb_vidq, b);
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ rc = videobuf_qbuf(&fh->vb_vidq, b);
+ else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ rc = videobuf_qbuf(&fh->vb_vbiq, b);
+
+ return rc;
}
static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
dev->greenscreen_detected = 0;
}
- return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ rc = videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+ else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+ rc = videobuf_dqbuf(&fh->vb_vbiq, b, file->f_flags & O_NONBLOCK);
+
+ return rc;
}
static struct v4l2_file_operations au0828_v4l_fops = {
.i2c = &cx18_i2c_std,
};
+static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
+ .type = CX18_CARD_HVR_1600_S5H1411,
+ .name = "Hauppauge HVR-1600",
+ .comment = "Simultaneous Digital and Analog TV capture supported\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
+ .hw_audio_ctrl = CX18_HW_418_AV,
+ .hw_muxer = CX18_HW_CS5345,
+ .hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+ CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
+ CX18_HW_Z8F0811_IR_HAUP,
+ .video_inputs = {
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
+ { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
+ { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
+ { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
+ },
+ .audio_inputs = {
+ { CX18_CARD_INPUT_AUD_TUNER,
+ CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
+ { CX18_CARD_INPUT_LINE_IN1,
+ CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
+ { CX18_CARD_INPUT_LINE_IN2,
+ CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
+ },
+ .radio_input = { CX18_CARD_INPUT_AUD_TUNER,
+ CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
+ .ddr = {
+ /* ESMT M13S128324A-5B memory */
+ .chip_config = 0x003,
+ .refresh = 0x30c,
+ .timing1 = 0x44220e82,
+ .timing2 = 0x08,
+ .tune_lane = 0,
+ .initial_emrs = 0,
+ },
+ .gpio_init.initial_value = 0x3001,
+ .gpio_init.direction = 0x3001,
+ .gpio_i2c_slave_reset = {
+ .active_lo_mask = 0x3001,
+ .msecs_asserted = 10,
+ .msecs_recovery = 40,
+ .ir_reset_mask = 0x0001,
+ },
+ .i2c = &cx18_i2c_std,
+};
+
static const struct cx18_card cx18_card_hvr1600_samsung = {
.type = CX18_CARD_HVR_1600_SAMSUNG,
.name = "Hauppauge HVR-1600 (Preproduction)",
&cx18_card_toshiba_qosmio_dvbt,
&cx18_card_leadtek_pvr2100,
&cx18_card_leadtek_dvr3100h,
- &cx18_card_gotview_dvd3
+ &cx18_card_gotview_dvd3,
+ &cx18_card_hvr1600_s5h1411
};
const struct cx18_card *cx18_get_card(u16 index)
"\t\t\t 7 = Leadtek WinFast PVR2100\n"
"\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
"\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
+ "\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
+ case CX18_CARD_HVR_1600_S5H1411:
tveeprom_hauppauge_analog(&c, tv, eedata);
break;
case CX18_CARD_YUAN_MPC718:
from the model number. Use the cardtype module option if you
have one of these preproduction models. */
switch (tv.model) {
- case 74000 ... 74999:
+ case 74301: /* Retail models */
+ case 74321:
+ case 74351: /* OEM models */
+ case 74361:
+ /* Digital side is s5h1411/tda18271 */
+ cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411);
+ break;
+ case 74021: /* Retail models */
+ case 74031:
+ case 74041:
+ case 74141:
+ case 74541: /* OEM models */
+ case 74551:
+ case 74591:
+ case 74651:
+ case 74691:
+ case 74751:
+ case 74891:
+ /* Digital side is s5h1409/mxl5005s */
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
case 0x718:
CX18_ERR("Invalid EEPROM\n");
return;
default:
- CX18_ERR("Unknown model %d, defaulting to HVR-1600\n", tv.model);
+ CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
+ "(cardtype=1)\n", tv.model);
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
}
#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */
#define CX18_CARD_GOTVIEW_PCI_DVD3 8 /* GoTView PCI DVD3 Hybrid */
-#define CX18_CARD_LAST 8
+#define CX18_CARD_HVR_1600_S5H1411 9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
+#define CX18_CARD_LAST 9
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1
#include "cx18-gpio.h"
#include "s5h1409.h"
#include "mxl5005s.h"
+#include "s5h1411.h"
+#include "tda18271.h"
#include "zl10353.h"
#include <linux/firmware.h>
};
/*
+ * CX18_CARD_HVR_1600_S5H1411
+ */
+static struct s5h1411_config hcw_s5h1411_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_OFF,
+ .vsb_if = S5H1411_IF_44000,
+ .qam_if = S5H1411_IF_4000,
+ .inversion = S5H1411_INVERSION_ON,
+ .status_mode = S5H1411_DEMODLOCKING,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_DIGITAL,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+/*
* CX18_CARD_LEADTEK_DVR3100H
*/
/* Information/confirmation of proper config values provided by Terry Wu */
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
+ case CX18_CARD_HVR_1600_S5H1411:
v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
v |= 0x00400000; /* Serial Mode */
v |= 0x00002000; /* Data Length - Byte */
ret = 0;
}
break;
+ case CX18_CARD_HVR_1600_S5H1411:
+ dvb->fe = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &cx->i2c_adap[0]);
+ if (dvb->fe != NULL)
+ dvb_attach(tda18271_attach, dvb->fe,
+ 0x60, &cx->i2c_adap[0],
+ &hauppauge_tda18271_config);
+ break;
case CX18_CARD_LEADTEK_DVR3100H:
dvb->fe = dvb_attach(zl10353_attach,
&leadtek_dvr3100h_demod,
if (!i2c_wait_done(i2c_adap))
goto eio;
- if (!i2c_slave_did_ack(i2c_adap)) {
- retval = -ENXIO;
- goto err;
- }
if (i2c_debug) {
printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
if (!(ctrl & I2C_NOSTOP))
eio:
retval = -EIO;
- err:
if (i2c_debug)
printk(KERN_ERR " ERR: %d\n", retval);
return retval;
if (!i2c_wait_done(i2c_adap))
goto eio;
- if (cnt == 0 && !i2c_slave_did_ack(i2c_adap)) {
- retval = -ENXIO;
- goto err;
- }
msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
if (i2c_debug) {
dprintk(1, " %02x", msg->buf[cnt]);
eio:
retval = -EIO;
- err:
if (i2c_debug)
printk(KERN_ERR " ERR: %d\n", retval);
return retval;
kfree(state);
return err;
}
- v4l2_ctrl_cluster(2, &state->volume);
+ if (!is_cx2583x(state))
+ v4l2_ctrl_cluster(2, &state->volume);
v4l2_ctrl_handler_setup(&state->hdl);
if (client->dev.platform_data) {
static void ivtv_irq_dma_err(struct ivtv *itv)
{
u32 data[CX2341X_MBOX_MAX_DATA];
+ u32 status;
del_timer(&itv->dma_timer);
+
ivtv_api_get_data(&itv->enc_mbox, IVTV_MBOX_DMA_END, 2, data);
+ status = read_reg(IVTV_REG_DMASTATUS);
IVTV_DEBUG_WARN("DMA ERROR %08x %08x %08x %d\n", data[0], data[1],
- read_reg(IVTV_REG_DMASTATUS), itv->cur_dma_stream);
- write_reg(read_reg(IVTV_REG_DMASTATUS) & 3, IVTV_REG_DMASTATUS);
+ status, itv->cur_dma_stream);
+ /*
+ * We do *not* write back to the IVTV_REG_DMASTATUS register to
+ * clear the error status, if either the encoder write (0x02) or
+ * decoder read (0x01) bus master DMA operation do not indicate
+ * completed. We can race with the DMA engine, which may have
+ * transitioned to completed status *after* we read the register.
+ * Setting a IVTV_REG_DMASTATUS flag back to "busy" status, after the
+ * DMA engine has completed, will cause the DMA engine to stop working.
+ */
+ status &= 0x3;
+ if (status == 0x3)
+ write_reg(status, IVTV_REG_DMASTATUS);
+
if (!test_bit(IVTV_F_I_UDMA, &itv->i_flags) &&
itv->cur_dma_stream >= 0 && itv->cur_dma_stream < IVTV_MAX_STREAMS) {
struct ivtv_stream *s = &itv->streams[itv->cur_dma_stream];
- /* retry */
- if (s->type >= IVTV_DEC_STREAM_TYPE_MPG)
+ if (s->type >= IVTV_DEC_STREAM_TYPE_MPG) {
+ /* retry */
+ /*
+ * FIXME - handle cases of DMA error similar to
+ * encoder below, except conditioned on status & 0x1
+ */
ivtv_dma_dec_start(s);
- else
- ivtv_dma_enc_start(s);
- return;
+ return;
+ } else {
+ if ((status & 0x2) == 0) {
+ /*
+ * CX2341x Bus Master DMA write is ongoing.
+ * Reset the timer and let it complete.
+ */
+ itv->dma_timer.expires =
+ jiffies + msecs_to_jiffies(600);
+ add_timer(&itv->dma_timer);
+ return;
+ }
+
+ if (itv->dma_retries < 3) {
+ /*
+ * CX2341x Bus Master DMA write has ended.
+ * Retry the write, starting with the first
+ * xfer segment. Just retrying the current
+ * segment is not sufficient.
+ */
+ s->sg_processed = 0;
+ itv->dma_retries++;
+ ivtv_dma_enc_start_xfer(s);
+ return;
+ }
+ /* Too many retries, give up on this one */
+ }
+
}
if (test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
ivtv_udma_start(itv);
v4l2_m2m_release(dev->m2m_dev);
del_timer_sync(&dev->timer);
video_unregister_device(dev->vfd);
- video_device_release(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
kfree(dev);
#include <linux/usb.h>
#define S2255_MAJOR_VERSION 1
-#define S2255_MINOR_VERSION 20
+#define S2255_MINOR_VERSION 21
#define S2255_RELEASE 0
#define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \
S2255_MINOR_VERSION, \
};
/* current cypress EEPROM firmware version */
-#define S2255_CUR_USB_FWVER ((3 << 8) | 6)
+#define S2255_CUR_USB_FWVER ((3 << 8) | 11)
/* current DSP FW version */
-#define S2255_CUR_DSP_FWVER 8
+#define S2255_CUR_DSP_FWVER 10102
/* Need DSP version 5+ for video status feature */
#define S2255_MIN_DSP_STATUS 5
#define S2255_MIN_DSP_COLORFILTER 8
static void s2255_reset_dsppower(struct s2255_dev *dev)
{
- s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b0b, NULL, 0, 1);
+ s2255_vendor_req(dev, 0x40, 0x0b0b, 0x0b01, NULL, 0, 1);
msleep(10);
s2255_vendor_req(dev, 0x50, 0x0000, 0x0000, NULL, 0, 1);
+ msleep(600);
+ s2255_vendor_req(dev, 0x10, 0x0000, 0x0000, NULL, 0, 1);
return;
}
{ "bmp085", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, bmp085_id);
static struct i2c_driver bmp085_driver = {
.driver = {
* still present
*/
if (host->bus_ops && host->bus_ops->detect && !host->bus_dead
- && mmc_card_is_removable(host))
+ && !(host->caps & MMC_CAP_NONREMOVABLE))
host->bus_ops->detect(host);
/*
*/
mmc_release_host(host);
err = mmc_add_card(host->card);
- mmc_claim_host(host);
if (err)
goto remove_added;
goto remove_added;
}
+ mmc_claim_host(host);
return 0;
remove_added:
/* Remove without lock if the device has been added. */
- mmc_release_host(host);
mmc_sdio_remove(host);
mmc_claim_host(host);
remove:
{
int ret;
+ if (!machine_is_colibri() && !machine_is_colibri320())
+ return -ENODEV;
+
colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!colibri_pcmcia_device)
return -ENOMEM;
config PPS_GENERATOR_PARPORT
tristate "Parallel port PPS signal generator"
- depends on PARPORT
+ depends on PARPORT && BROKEN
help
If you say yes here you get support for a PPS signal generator which
utilizes STROBE pin of a parallel port to send PPS signals. It uses
}
/* Update control registers */
-static void s3c_rtc_setaie(int to)
+static int s3c_rtc_setaie(struct device *dev, unsigned int enabled)
{
unsigned int tmp;
- pr_debug("%s: aie=%d\n", __func__, to);
+ pr_debug("%s: aie=%d\n", __func__, enabled);
tmp = readb(s3c_rtc_base + S3C2410_RTCALM) & ~S3C2410_RTCALM_ALMEN;
- if (to)
+ if (enabled)
tmp |= S3C2410_RTCALM_ALMEN;
writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
+
+ return 0;
}
static int s3c_rtc_setpie(struct device *dev, int enabled)
writeb(alrm_en, base + S3C2410_RTCALM);
- s3c_rtc_setaie(alrm->enabled);
+ s3c_rtc_setaie(dev, alrm->enabled);
return 0;
}
rtc_device_unregister(rtc);
s3c_rtc_setpie(&dev->dev, 0);
- s3c_rtc_setaie(0);
+ s3c_rtc_setaie(&dev->dev, 0);
clk_disable(rtc_clk);
clk_put(rtc_clk);
/*
* Parameter parsing functions.
*/
-static int __initdata devs = XPRAM_DEVS;
-static char __initdata *sizes[XPRAM_MAX_DEVS];
+static int devs = XPRAM_DEVS;
+static char *sizes[XPRAM_MAX_DEVS];
module_param(devs, int, 0);
module_param_array(sizes, charp, NULL, 0);
unsigned int cmd, unsigned long arg)
{
void __user *argp;
- int ct, perm;
+ unsigned int ct;
+ int perm;
argp = (void __user *)arg;
return rc;
}
+static inline void
+tape_do_io_async_free(struct tape_device *device, struct tape_request *request)
+{
+ request->callback = (void *) tape_free_request;
+ request->callback_data = NULL;
+ tape_do_io_async(device, request);
+}
+
extern int tape_oper_handler(int irq, int status);
extern void tape_noper_handler(int irq, int status);
extern int tape_open(struct tape_device *);
* Medium sense for 34xx tapes. There is no 'real' medium sense call.
* So we just do a normal sense.
*/
-static int
-tape_34xx_medium_sense(struct tape_device *device)
+static void __tape_34xx_medium_sense(struct tape_request *request)
{
- struct tape_request *request;
- unsigned char *sense;
- int rc;
-
- request = tape_alloc_request(1, 32);
- if (IS_ERR(request)) {
- DBF_EXCEPTION(6, "MSEN fail\n");
- return PTR_ERR(request);
- }
-
- request->op = TO_MSEN;
- tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+ struct tape_device *device = request->device;
+ unsigned char *sense;
- rc = tape_do_io_interruptible(device, request);
if (request->rc == 0) {
sense = request->cpdata;
device->tape_generic_status |= GMT_WR_PROT(~0);
else
device->tape_generic_status &= ~GMT_WR_PROT(~0);
- } else {
+ } else
DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n",
request->rc);
- }
tape_free_request(request);
+}
+
+static int tape_34xx_medium_sense(struct tape_device *device)
+{
+ struct tape_request *request;
+ int rc;
+
+ request = tape_alloc_request(1, 32);
+ if (IS_ERR(request)) {
+ DBF_EXCEPTION(6, "MSEN fail\n");
+ return PTR_ERR(request);
+ }
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+ rc = tape_do_io_interruptible(device, request);
+ __tape_34xx_medium_sense(request);
return rc;
}
+static void tape_34xx_medium_sense_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = tape_alloc_request(1, 32);
+ if (IS_ERR(request)) {
+ DBF_EXCEPTION(6, "MSEN fail\n");
+ return;
+ }
+
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+ request->callback = (void *) __tape_34xx_medium_sense;
+ request->callback_data = NULL;
+ tape_do_io_async(device, request);
+}
+
struct tape_34xx_work {
struct tape_device *device;
enum tape_op op;
* is inserted but cannot call tape_do_io* from an interrupt context.
* Maybe that's useful for other actions we want to start from the
* interrupt handler.
+ * Note: the work handler is called by the system work queue. The tape
+ * commands started by the handler need to be asynchrounous, otherwise
+ * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
*/
static void
tape_34xx_work_handler(struct work_struct *work)
switch(p->op) {
case TO_MSEN:
- tape_34xx_medium_sense(device);
+ tape_34xx_medium_sense_async(device);
break;
default:
DBF_EVENT(3, "T34XX: internal error: unknown work\n");
/*
* Enable encryption
*/
-static int tape_3592_enable_crypt(struct tape_device *device)
+static struct tape_request *__tape_3592_enable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_enable_crypt\n");
if (!crypt_supported(device))
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return request;
data = request->cpdata;
memset(data,0,72);
request->op = TO_CRYPT_ON;
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+ return request;
+}
+
+static int tape_3592_enable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_enable_crypt(device);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
return tape_do_io_free(device, request);
}
+static void tape_3592_enable_crypt_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_enable_crypt(device);
+ if (!IS_ERR(request))
+ tape_do_io_async_free(device, request);
+}
+
/*
* Disable encryption
*/
-static int tape_3592_disable_crypt(struct tape_device *device)
+static struct tape_request *__tape_3592_disable_crypt(struct tape_device *device)
{
struct tape_request *request;
char *data;
DBF_EVENT(6, "tape_3592_disable_crypt\n");
if (!crypt_supported(device))
- return -ENOSYS;
+ return ERR_PTR(-ENOSYS);
request = tape_alloc_request(2, 72);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return request;
data = request->cpdata;
memset(data,0,72);
tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+ return request;
+}
+
+static int tape_3592_disable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_disable_crypt(device);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
return tape_do_io_free(device, request);
}
+static void tape_3592_disable_crypt_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = __tape_3592_disable_crypt(device);
+ if (!IS_ERR(request))
+ tape_do_io_async_free(device, request);
+}
+
/*
* IOCTL: Set encryption status
*/
/*
* SENSE Medium: Get Sense data about medium state
*/
-static int
-tape_3590_sense_medium(struct tape_device *device)
+static int tape_3590_sense_medium(struct tape_device *device)
{
struct tape_request *request;
return tape_do_io_free(device, request);
}
+static void tape_3590_sense_medium_async(struct tape_device *device)
+{
+ struct tape_request *request;
+
+ request = tape_alloc_request(1, 128);
+ if (IS_ERR(request))
+ return;
+ request->op = TO_MSEN;
+ tape_ccw_end(request->cpaddr, MEDIUM_SENSE, 128, request->cpdata);
+ tape_do_io_async_free(device, request);
+}
+
/*
* MTTELL: Tell block. Return the number of block relative to current file.
*/
* 2. The attention msg is written to the "read subsystem data" buffer.
* In this case we probably should print it to the console.
*/
-static int
-tape_3590_read_attmsg(struct tape_device *device)
+static void tape_3590_read_attmsg_async(struct tape_device *device)
{
struct tape_request *request;
char *buf;
request = tape_alloc_request(3, 4096);
if (IS_ERR(request))
- return PTR_ERR(request);
+ return;
request->op = TO_READ_ATTMSG;
buf = request->cpdata;
buf[0] = PREP_RD_SS_DATA;
tape_ccw_cc(request->cpaddr, PERFORM_SS_FUNC, 12, buf);
tape_ccw_cc(request->cpaddr + 1, READ_SS_DATA, 4096 - 12, buf + 12);
tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
- return tape_do_io_free(device, request);
+ tape_do_io_async_free(device, request);
}
/*
* These functions are used to schedule follow-up actions from within an
* interrupt context (like unsolicited interrupts).
+ * Note: the work handler is called by the system work queue. The tape
+ * commands started by the handler need to be asynchrounous, otherwise
+ * a deadlock can occur e.g. in case of a deferred cc=1 (see __tape_do_irq).
*/
struct work_handler_data {
struct tape_device *device;
switch (p->op) {
case TO_MSEN:
- tape_3590_sense_medium(p->device);
+ tape_3590_sense_medium_async(p->device);
break;
case TO_READ_ATTMSG:
- tape_3590_read_attmsg(p->device);
+ tape_3590_read_attmsg_async(p->device);
break;
case TO_CRYPT_ON:
- tape_3592_enable_crypt(p->device);
+ tape_3592_enable_crypt_async(p->device);
break;
case TO_CRYPT_OFF:
- tape_3592_disable_crypt(p->device);
+ tape_3592_disable_crypt_async(p->device);
break;
default:
DBF_EVENT(3, "T3590: work handler undefined for "
lcd->spi = spi;
lcd->power = FB_BLANK_POWERDOWN;
lcd->buffer = kzalloc(8, GFP_KERNEL);
+ if (!lcd->buffer) {
+ ret = -ENOMEM;
+ goto out_free_lcd;
+ }
ld = lcd_device_register("ltv350qv", &spi->dev, lcd, <v_ops);
if (IS_ERR(ld)) {
ret = PTR_ERR(ld);
- goto out_free_lcd;
+ goto out_free_buffer;
}
lcd->ld = ld;
out_unregister:
lcd_device_unregister(ld);
+out_free_buffer:
+ kfree(lcd->buffer);
out_free_lcd:
kfree(lcd);
return ret;
ltv350qv_power(lcd, FB_BLANK_POWERDOWN);
lcd_device_unregister(lcd->ld);
+ kfree(lcd->buffer);
kfree(lcd);
return 0;
static int __init fitpc2_wdt_init(void)
{
int err;
+ const char *brd_name;
- if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
+ brd_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (!brd_name || !strstr(brd_name, "SBC-FITPC2"))
return -ENODEV;
- pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
+ pr_info("%s found\n", brd_name);
if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
}
di->dentry = dentry;
di->lease_session = NULL;
- di->parent_inode = igrab(dentry->d_parent->d_inode);
dentry->d_fsdata = di;
dentry->d_time = jiffies;
ceph_dentry_lru_add(dentry);
spin_lock(&inode->i_lock);
if (ci->i_release_count == fi->dir_release_count) {
dout(" marking %p complete\n", inode);
- ci->i_ceph_flags |= CEPH_I_COMPLETE;
+ /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
ci->i_max_offset = filp->f_pos;
}
spin_unlock(&inode->i_lock);
/* .snap dir? */
if (err == -ENOENT &&
+ ceph_snap(parent) == CEPH_NOSNAP &&
strcmp(dentry->d_name.name,
fsc->mount_options->snapdir_name) == 0) {
struct inode *inode = ceph_get_snapdir(parent);
{
struct inode *dir;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
dir = dentry->d_parent->d_inode;
static void ceph_dentry_release(struct dentry *dentry)
{
struct ceph_dentry_info *di = ceph_dentry(dentry);
- struct inode *parent_inode = NULL;
- u64 snapid = CEPH_NOSNAP;
- if (!IS_ROOT(dentry)) {
- parent_inode = di->parent_inode;
- if (parent_inode)
- snapid = ceph_snap(parent_inode);
- }
- dout("dentry_release %p parent %p\n", dentry, parent_inode);
- if (parent_inode && snapid != CEPH_SNAPDIR) {
- struct ceph_inode_info *ci = ceph_inode(parent_inode);
-
- spin_lock(&parent_inode->i_lock);
- if (ci->i_shared_gen == di->lease_shared_gen ||
- snapid <= CEPH_MAXSNAP) {
- dout(" clearing %p complete (d_release)\n",
- parent_inode);
- ci->i_ceph_flags &= ~CEPH_I_COMPLETE;
- ci->i_release_count++;
- }
- spin_unlock(&parent_inode->i_lock);
- }
+ dout("dentry_release %p\n", dentry);
if (di) {
ceph_dentry_lru_del(dentry);
if (di->lease_session)
kmem_cache_free(ceph_dentry_cachep, di);
dentry->d_fsdata = NULL;
}
- if (parent_inode)
- iput(parent_inode);
}
static int ceph_snapdir_d_revalidate(struct dentry *dentry,
(issued & CEPH_CAP_FILE_EXCL) == 0 &&
(ci->i_ceph_flags & CEPH_I_COMPLETE) == 0) {
dout(" marking %p complete (empty)\n", inode);
- ci->i_ceph_flags |= CEPH_I_COMPLETE;
+ /* ci->i_ceph_flags |= CEPH_I_COMPLETE; */
ci->i_max_offset = 2;
}
break;
struct dentry *dentry;
u64 time;
u64 offset;
- struct inode *parent_inode;
};
struct ceph_inode_xattrs_info {
}
EXPORT_SYMBOL(d_alloc_root);
+static struct dentry * __d_find_any_alias(struct inode *inode)
+{
+ struct dentry *alias;
+
+ if (list_empty(&inode->i_dentry))
+ return NULL;
+ alias = list_first_entry(&inode->i_dentry, struct dentry, d_alias);
+ __dget(alias);
+ return alias;
+}
+
+static struct dentry * d_find_any_alias(struct inode *inode)
+{
+ struct dentry *de;
+
+ spin_lock(&inode->i_lock);
+ de = __d_find_any_alias(inode);
+ spin_unlock(&inode->i_lock);
+ return de;
+}
+
+
/**
* d_obtain_alias - find or allocate a dentry for a given inode
* @inode: inode to allocate the dentry for
if (IS_ERR(inode))
return ERR_CAST(inode);
- res = d_find_alias(inode);
+ res = d_find_any_alias(inode);
if (res)
goto out_iput;
spin_lock(&inode->i_lock);
- res = __d_find_alias(inode, 0);
+ res = __d_find_any_alias(inode);
if (res) {
spin_unlock(&inode->i_lock);
dput(tmp);
static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd)
{
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
/* This is not negative dentry. Always valid. */
static int vfat_revalidate_ci(struct dentry *dentry, struct nameidata *nd)
{
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
/*
{
struct inode *inode;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
inode = entry->d_inode;
int error;
int had_lock = 0;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
parent = dget_parent(dentry);
static int jfs_ci_revalidate(struct dentry *dentry, struct nameidata *nd)
{
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
/*
* This is not negative dentry. Always valid.
/* nd->path had been dropped */
current->total_link_count = 0;
nd->path = save;
+ nd->inode = save.dentry->d_inode;
path_get(&nd->path);
nd->flags |= LOOKUP_REVAL;
result = link_path_walk(name, nd);
/* !O_CREAT, simple open */
error = do_path_lookup(dfd, pathname, flags, &nd);
if (unlikely(error))
- goto out_filp;
+ goto out_filp2;
error = -ELOOP;
if (!(nd.flags & LOOKUP_FOLLOW)) {
if (nd.inode->i_op->follow_link)
- goto out_path;
+ goto out_path2;
}
error = -ENOTDIR;
if (nd.flags & LOOKUP_DIRECTORY) {
if (!nd.inode->i_op->lookup)
- goto out_path;
+ goto out_path2;
}
audit_inode(pathname, nd.path.dentry);
filp = finish_open(&nd, open_flag, acc_mode);
+out2:
release_open_intent(&nd);
return filp;
+out_path2:
+ path_put(&nd.path);
+out_filp2:
+ filp = ERR_PTR(error);
+ goto out2;
+
creat:
/* OK, have to create the file. Find the parent. */
error = path_init_rcu(dfd, pathname,
#include <linux/sunrpc/bc_xprt.h>
#include <linux/xattr.h>
#include <linux/utsname.h>
+#include <linux/mm.h>
#include "nfs4_fs.h"
#include "delegation.h"
}
}
+static int buf_to_pages_noslab(const void *buf, size_t buflen,
+ struct page **pages, unsigned int *pgbase)
+{
+ struct page *newpage, **spages;
+ int rc = 0;
+ size_t len;
+ spages = pages;
+
+ do {
+ len = min(PAGE_CACHE_SIZE, buflen);
+ newpage = alloc_page(GFP_KERNEL);
+
+ if (newpage == NULL)
+ goto unwind;
+ memcpy(page_address(newpage), buf, len);
+ buf += len;
+ buflen -= len;
+ *pages++ = newpage;
+ rc++;
+ } while (buflen != 0);
+
+ return rc;
+
+unwind:
+ for(; rc > 0; rc--)
+ __free_page(spages[rc-1]);
+ return -ENOMEM;
+}
+
struct nfs4_cached_acl {
int cached;
size_t len;
.rpc_argp = &arg,
.rpc_resp = &res,
};
- int ret;
+ int ret, i;
if (!nfs4_server_supports_acls(server))
return -EOPNOTSUPP;
+ i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
+ if (i < 0)
+ return i;
nfs_inode_return_delegation(inode);
- buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+
+ /*
+ * Free each page after tx, so the only ref left is
+ * held by the network stack
+ */
+ for (; i > 0; i--)
+ put_page(pages[i-1]);
+
/*
* Acl update can result in inode attribute update.
* so mark the attribute cache invalid.
* If the server returns different values for sessionID, slotID or
* sequence number, the server is looney tunes.
*/
- p = xdr_inline_decode(xdr, NFS4_MAX_SESSIONID_LEN + 4 + 4);
+ p = xdr_inline_decode(xdr, NFS4_MAX_SESSIONID_LEN + 4 + 4 + 4 + 4);
if (unlikely(p == NULL))
goto out_overflow;
memcpy(id.data, p, NFS4_MAX_SESSIONID_LEN);
static struct nfs4_delegation *
find_delegation_file(struct nfs4_file *fp, stateid_t *stid)
{
- struct nfs4_delegation *dp = NULL;
+ struct nfs4_delegation *dp;
spin_lock(&recall_lock);
- list_for_each_entry(dp, &fp->fi_delegations, dl_perfile) {
- if (dp->dl_stateid.si_stateownerid == stid->si_stateownerid)
- break;
- }
+ list_for_each_entry(dp, &fp->fi_delegations, dl_perfile)
+ if (dp->dl_stateid.si_stateownerid == stid->si_stateownerid) {
+ spin_unlock(&recall_lock);
+ return dp;
+ }
spin_unlock(&recall_lock);
- return dp;
+ return NULL;
}
int share_access_to_flags(u32 share_access)
u32 dummy;
char *machine_name;
- int i;
+ int i, j;
int nr_secflavs;
READ_BUF(16);
READ_BUF(4);
READ32(dummy);
READ_BUF(dummy * 4);
- for (i = 0; i < dummy; ++i)
+ for (j = 0; j < dummy; ++j)
READ32(dummy);
break;
case RPC_AUTH_GSS:
int ret = 0; /* if all else fails, just return false */
struct ocfs2_super *osb;
- if (nd->flags & LOOKUP_RCU)
+ if (nd && nd->flags & LOOKUP_RCU)
return -ECHILD;
inode = dentry->d_inode;
if (!(file->f_mode & FMODE_WRITE))
return -EBADF;
+
+ /* It's not possible punch hole on append only file */
+ if (mode & FALLOC_FL_PUNCH_HOLE && IS_APPEND(inode))
+ return -EPERM;
+
+ if (IS_IMMUTABLE(inode))
+ return -EPERM;
+
/*
* Revalidate the write permissions, in case security policy has
* changed since the files were opened.
&proc_self_inode_operations, NULL, {}),
};
-/*
- * Exceptional case: normally we are not allowed to unhash a busy
- * directory. In this case, however, we can do it - no aliasing problems
- * due to the way we treat inodes.
- */
-static int proc_base_revalidate(struct dentry *dentry, struct nameidata *nd)
-{
- struct inode *inode;
- struct task_struct *task;
-
- if (nd->flags & LOOKUP_RCU)
- return -ECHILD;
-
- inode = dentry->d_inode;
- task = get_proc_task(inode);
- if (task) {
- put_task_struct(task);
- return 1;
- }
- d_drop(dentry);
- return 0;
-}
-
-static const struct dentry_operations proc_base_dentry_operations =
-{
- .d_revalidate = proc_base_revalidate,
- .d_delete = pid_delete_dentry,
-};
-
static struct dentry *proc_base_instantiate(struct inode *dir,
struct dentry *dentry, struct task_struct *task, const void *ptr)
{
if (p->fop)
inode->i_fop = p->fop;
ei->op = p->op;
- d_set_d_op(dentry, &proc_base_dentry_operations);
d_add(dentry, inode);
error = NULL;
out:
static void proc_evict_inode(struct inode *inode)
{
struct proc_dir_entry *de;
+ struct ctl_table_header *head;
truncate_inode_pages(&inode->i_data, 0);
end_writeback(inode);
de = PROC_I(inode)->pde;
if (de)
pde_put(de);
- if (PROC_I(inode)->sysctl)
- sysctl_head_put(PROC_I(inode)->sysctl);
+ head = PROC_I(inode)->sysctl;
+ if (head) {
+ rcu_assign_pointer(PROC_I(inode)->sysctl, NULL);
+ sysctl_head_put(head);
+ }
}
struct vfsmount *proc_mnt;
const struct dentry *dentry, const struct inode *inode,
unsigned int len, const char *str, const struct qstr *name)
{
+ struct ctl_table_header *head;
/* Although proc doesn't have negative dentries, rcu-walk means
* that inode here can be NULL */
+ /* AV: can it, indeed? */
if (!inode)
- return 0;
+ return 1;
if (name->len != len)
return 1;
if (memcmp(name->name, str, len))
return 1;
- return !sysctl_is_seen(PROC_I(inode)->sysctl);
+ head = rcu_dereference(PROC_I(inode)->sysctl);
+ return !head || !sysctl_is_seen(head);
}
static const struct dentry_operations proc_sys_dentry_operations = {
static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd)
{
- if (nd->flags & LOOKUP_RCU)
- return -ECHILD;
return -EPERM;
}
#define SOCK_CLOSED 11 /* socket state changed to closed */
#define OPENING 13 /* open connection w/ (possibly new) peer */
#define DEAD 14 /* dead, about to kfree */
+#define BACKOFF 15
/*
* A single connection with another host.
struct list_head out_queue;
struct list_head out_sent; /* sending or sent but unacked */
u64 out_seq; /* last message queued for send */
- bool out_keepalive_pending;
u64 in_seq, in_seq_acked; /* last message received, acked */
return alloc_pages_current(gfp_mask, order);
}
extern struct page *alloc_pages_vma(gfp_t gfp_mask, int order,
- struct vm_area_struct *vma, unsigned long addr);
+ struct vm_area_struct *vma, unsigned long addr,
+ int node);
#else
#define alloc_pages(gfp_mask, order) \
alloc_pages_node(numa_node_id(), gfp_mask, order)
-#define alloc_pages_vma(gfp_mask, order, vma, addr) \
+#define alloc_pages_vma(gfp_mask, order, vma, addr, node) \
alloc_pages(gfp_mask, order)
#endif
#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
-#define alloc_page_vma(gfp_mask, vma, addr) \
- alloc_pages_vma(gfp_mask, 0, vma, addr)
+#define alloc_page_vma(gfp_mask, vma, addr) \
+ alloc_pages_vma(gfp_mask, 0, vma, addr, numa_node_id())
+#define alloc_page_vma_node(gfp_mask, vma, addr, node) \
+ alloc_pages_vma(gfp_mask, 0, vma, addr, node)
extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order);
extern unsigned long get_zeroed_page(gfp_t gfp_mask);
extern int netdev_info(const struct net_device *dev, const char *format, ...)
__attribute__ ((format (printf, 2, 3)));
+#define MODULE_ALIAS_NETDEV(device) \
+ MODULE_ALIAS("netdev-" device)
+
#if defined(DEBUG)
#define netdev_dbg(__dev, format, args...) \
netdev_printk(KERN_DEBUG, __dev, format, ##args)
extern long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
-extern int ptrace_traceme(void);
extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
extern int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long dst, int len);
-extern int ptrace_attach(struct task_struct *tsk);
-extern int ptrace_detach(struct task_struct *, unsigned int);
extern void ptrace_disable(struct task_struct *);
extern int ptrace_check_attach(struct task_struct *task, int kill);
extern int ptrace_request(struct task_struct *child, long request,
#ifdef __KERNEL__
#include <linux/list.h>
+#include <linux/rcupdate.h>
/* For the /proc/sys support */
struct ctl_table;
struct ctl_table trees. */
struct ctl_table_header
{
- struct ctl_table *ctl_table;
- struct list_head ctl_entry;
- int used;
- int count;
+ union {
+ struct {
+ struct ctl_table *ctl_table;
+ struct list_head ctl_entry;
+ int used;
+ int count;
+ };
+ struct rcu_head rcu;
+ };
struct completion *unregistering;
struct ctl_table *ctl_table_arg;
struct ctl_table_root *root;
return -ENODEV;
trialcs = alloc_trial_cpuset(cs);
- if (!trialcs)
- return -ENOMEM;
+ if (!trialcs) {
+ retval = -ENOMEM;
+ goto out;
+ }
switch (cft->private) {
case FILE_CPULIST:
}
free_trial_cpuset(trialcs);
+out:
cgroup_unlock();
return retval;
}
return !err;
}
-int ptrace_attach(struct task_struct *task)
+static int ptrace_attach(struct task_struct *task)
{
int retval;
* Performs checks and sets PT_PTRACED.
* Should be used by all ptrace implementations for PTRACE_TRACEME.
*/
-int ptrace_traceme(void)
+static int ptrace_traceme(void)
{
int ret = -EPERM;
return false;
}
-int ptrace_detach(struct task_struct *child, unsigned int data)
+static int ptrace_detach(struct task_struct *child, unsigned int data)
{
bool dead = false;
static void sched_rt_rq_enqueue(struct rt_rq *rt_rq)
{
- int this_cpu = smp_processor_id();
struct task_struct *curr = rq_of_rt_rq(rt_rq)->curr;
struct sched_rt_entity *rt_se;
- rt_se = rt_rq->tg->rt_se[this_cpu];
+ int cpu = cpu_of(rq_of_rt_rq(rt_rq));
+
+ rt_se = rt_rq->tg->rt_se[cpu];
if (rt_rq->rt_nr_running) {
if (rt_se && !on_rt_rq(rt_se))
static void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
{
- int this_cpu = smp_processor_id();
struct sched_rt_entity *rt_se;
+ int cpu = cpu_of(rq_of_rt_rq(rt_rq));
- rt_se = rt_rq->tg->rt_se[this_cpu];
+ rt_se = rt_rq->tg->rt_se[cpu];
if (rt_se && on_rt_rq(rt_se))
dequeue_rt_entity(rt_se);
if (rt_rq->rt_time || rt_rq->rt_nr_running)
idle = 0;
raw_spin_unlock(&rt_rq->rt_runtime_lock);
- } else if (rt_rq->rt_nr_running)
+ } else if (rt_rq->rt_nr_running) {
idle = 0;
+ if (!rt_rq_throttled(rt_rq))
+ enqueue = 1;
+ }
if (enqueue)
sched_rt_rq_enqueue(rt_rq);
static struct ctl_table root_table[];
static struct ctl_table_root sysctl_table_root;
static struct ctl_table_header root_table_header = {
- .count = 1,
+ {{.count = 1,
.ctl_table = root_table,
- .ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
+ .ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),}},
.root = &sysctl_table_root,
.set = &sysctl_table_root.default_set,
};
spin_unlock(&sysctl_lock);
}
+static void free_head(struct rcu_head *rcu)
+{
+ kfree(container_of(rcu, struct ctl_table_header, rcu));
+}
+
void sysctl_head_put(struct ctl_table_header *head)
{
spin_lock(&sysctl_lock);
if (!--head->count)
- kfree(head);
+ call_rcu(&head->rcu, free_head);
spin_unlock(&sysctl_lock);
}
start_unregistering(header);
if (!--header->parent->count) {
WARN_ON(1);
- kfree(header->parent);
+ call_rcu(&header->parent->rcu, free_head);
}
if (!--header->count)
- kfree(header);
+ call_rcu(&header->rcu, free_head);
spin_unlock(&sysctl_lock);
}
static inline struct page *alloc_hugepage_vma(int defrag,
struct vm_area_struct *vma,
- unsigned long haddr)
+ unsigned long haddr, int nd)
{
return alloc_pages_vma(alloc_hugepage_gfpmask(defrag),
- HPAGE_PMD_ORDER, vma, haddr);
+ HPAGE_PMD_ORDER, vma, haddr, nd);
}
#ifndef CONFIG_NUMA
if (unlikely(khugepaged_enter(vma)))
return VM_FAULT_OOM;
page = alloc_hugepage_vma(transparent_hugepage_defrag(vma),
- vma, haddr);
+ vma, haddr, numa_node_id());
if (unlikely(!page))
goto out;
if (unlikely(mem_cgroup_newpage_charge(page, mm, GFP_KERNEL))) {
}
for (i = 0; i < HPAGE_PMD_NR; i++) {
- pages[i] = alloc_page_vma(GFP_HIGHUSER_MOVABLE,
- vma, address);
+ pages[i] = alloc_page_vma_node(GFP_HIGHUSER_MOVABLE,
+ vma, address, page_to_nid(page));
if (unlikely(!pages[i] ||
mem_cgroup_newpage_charge(pages[i], mm,
GFP_KERNEL))) {
if (transparent_hugepage_enabled(vma) &&
!transparent_hugepage_debug_cow())
new_page = alloc_hugepage_vma(transparent_hugepage_defrag(vma),
- vma, haddr);
+ vma, haddr, numa_node_id());
else
new_page = NULL;
static void collapse_huge_page(struct mm_struct *mm,
unsigned long address,
struct page **hpage,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma,
+ int node)
{
pgd_t *pgd;
pud_t *pud;
* mmap_sem in read mode is good idea also to allow greater
* scalability.
*/
- new_page = alloc_hugepage_vma(khugepaged_defrag(), vma, address);
+ new_page = alloc_hugepage_vma(khugepaged_defrag(), vma, address,
+ node);
if (unlikely(!new_page)) {
up_read(&mm->mmap_sem);
*hpage = ERR_PTR(-ENOMEM);
struct page *page;
unsigned long _address;
spinlock_t *ptl;
+ int node = -1;
VM_BUG_ON(address & ~HPAGE_PMD_MASK);
page = vm_normal_page(vma, _address, pteval);
if (unlikely(!page))
goto out_unmap;
+ /*
+ * Chose the node of the first page. This could
+ * be more sophisticated and look at more pages,
+ * but isn't for now.
+ */
+ if (node == -1)
+ node = page_to_nid(page);
VM_BUG_ON(PageCompound(page));
if (!PageLRU(page) || PageLocked(page) || !PageAnon(page))
goto out_unmap;
pte_unmap_unlock(pte, ptl);
if (ret)
/* collapse_huge_page will return with the mmap_sem released */
- collapse_huge_page(mm, address, hpage, vma);
+ collapse_huge_page(mm, address, hpage, vma, node);
out:
return ret;
}
}
/* Return a zonelist indicated by gfp for node representing a mempolicy */
-static struct zonelist *policy_zonelist(gfp_t gfp, struct mempolicy *policy)
+static struct zonelist *policy_zonelist(gfp_t gfp, struct mempolicy *policy,
+ int nd)
{
- int nd = numa_node_id();
-
switch (policy->mode) {
case MPOL_PREFERRED:
if (!(policy->flags & MPOL_F_LOCAL))
zl = node_zonelist(interleave_nid(*mpol, vma, addr,
huge_page_shift(hstate_vma(vma))), gfp_flags);
} else {
- zl = policy_zonelist(gfp_flags, *mpol);
+ zl = policy_zonelist(gfp_flags, *mpol, numa_node_id());
if ((*mpol)->mode == MPOL_BIND)
*nodemask = &(*mpol)->v.nodes;
}
*/
struct page *
alloc_pages_vma(gfp_t gfp, int order, struct vm_area_struct *vma,
- unsigned long addr)
+ unsigned long addr, int node)
{
struct mempolicy *pol = get_vma_policy(current, vma, addr);
struct zonelist *zl;
put_mems_allowed();
return page;
}
- zl = policy_zonelist(gfp, pol);
+ zl = policy_zonelist(gfp, pol, node);
if (unlikely(mpol_needs_cond_ref(pol))) {
/*
* slow path: ref counted shared policy
page = alloc_page_interleave(gfp, order, interleave_nodes(pol));
else
page = __alloc_pages_nodemask(gfp, order,
- policy_zonelist(gfp, pol), policy_nodemask(gfp, pol));
+ policy_zonelist(gfp, pol, numa_node_id()),
+ policy_nodemask(gfp, pol));
put_mems_allowed();
return page;
}
ceph_msg_put(con->out_msg);
con->out_msg = NULL;
}
- con->out_keepalive_pending = false;
con->in_seq = 0;
con->in_seq_acked = 0;
}
con->auth_retry);
if (con->auth_retry == 2) {
con->error_msg = "connect authorization failure";
- reset_connection(con);
- set_bit(CLOSED, &con->state);
return -1;
}
con->auth_retry = 1;
/* open the socket first? */
if (con->sock == NULL) {
- /*
- * if we were STANDBY and are reconnecting _this_
- * connection, bump connect_seq now. Always bump
- * global_seq.
- */
- if (test_and_clear_bit(STANDBY, &con->state))
- con->connect_seq++;
-
prepare_write_banner(msgr, con);
prepare_write_connect(msgr, con, 1);
prepare_read_banner(con);
work.work);
mutex_lock(&con->mutex);
+ if (test_and_clear_bit(BACKOFF, &con->state)) {
+ dout("con_work %p backing off\n", con);
+ if (queue_delayed_work(ceph_msgr_wq, &con->work,
+ round_jiffies_relative(con->delay))) {
+ dout("con_work %p backoff %lu\n", con, con->delay);
+ mutex_unlock(&con->mutex);
+ return;
+ } else {
+ con->ops->put(con);
+ dout("con_work %p FAILED to back off %lu\n", con,
+ con->delay);
+ }
+ }
+ if (test_bit(STANDBY, &con->state)) {
+ dout("con_work %p STANDBY\n", con);
+ goto done;
+ }
if (test_bit(CLOSED, &con->state)) { /* e.g. if we are replaced */
dout("con_work CLOSED\n");
con_close_socket(con);
/* Requeue anything that hasn't been acked */
list_splice_init(&con->out_sent, &con->out_queue);
- /* If there are no messages in the queue, place the connection
- * in a STANDBY state (i.e., don't try to reconnect just yet). */
- if (list_empty(&con->out_queue) && !con->out_keepalive_pending) {
- dout("fault setting STANDBY\n");
+ /* If there are no messages queued or keepalive pending, place
+ * the connection in a STANDBY state */
+ if (list_empty(&con->out_queue) &&
+ !test_bit(KEEPALIVE_PENDING, &con->state)) {
+ dout("fault %p setting STANDBY clearing WRITE_PENDING\n", con);
+ clear_bit(WRITE_PENDING, &con->state);
set_bit(STANDBY, &con->state);
} else {
/* retry after a delay. */
con->delay = BASE_DELAY_INTERVAL;
else if (con->delay < MAX_DELAY_INTERVAL)
con->delay *= 2;
- dout("fault queueing %p delay %lu\n", con, con->delay);
con->ops->get(con);
if (queue_delayed_work(ceph_msgr_wq, &con->work,
- round_jiffies_relative(con->delay)) == 0)
+ round_jiffies_relative(con->delay))) {
+ dout("fault queued %p delay %lu\n", con, con->delay);
+ } else {
con->ops->put(con);
+ dout("fault failed to queue %p delay %lu, backoff\n",
+ con, con->delay);
+ /*
+ * In many cases we see a socket state change
+ * while con_work is running and end up
+ * queuing (non-delayed) work, such that we
+ * can't backoff with a delay. Set a flag so
+ * that when con_work restarts we schedule the
+ * delay then.
+ */
+ set_bit(BACKOFF, &con->state);
+ }
}
out_unlock:
}
EXPORT_SYMBOL(ceph_messenger_destroy);
+static void clear_standby(struct ceph_connection *con)
+{
+ /* come back from STANDBY? */
+ if (test_and_clear_bit(STANDBY, &con->state)) {
+ mutex_lock(&con->mutex);
+ dout("clear_standby %p and ++connect_seq\n", con);
+ con->connect_seq++;
+ WARN_ON(test_bit(WRITE_PENDING, &con->state));
+ WARN_ON(test_bit(KEEPALIVE_PENDING, &con->state));
+ mutex_unlock(&con->mutex);
+ }
+}
+
/*
* Queue up an outgoing message on the given connection.
*/
/* if there wasn't anything waiting to send before, queue
* new work */
+ clear_standby(con);
if (test_and_set_bit(WRITE_PENDING, &con->state) == 0)
queue_con(con);
}
*/
void ceph_con_keepalive(struct ceph_connection *con)
{
+ dout("con_keepalive %p\n", con);
+ clear_standby(con);
if (test_and_set_bit(KEEPALIVE_PENDING, &con->state) == 0 &&
test_and_set_bit(WRITE_PENDING, &con->state) == 0)
queue_con(con);
int num_pages, bool write_page)
{
struct page **pages;
- int rc;
+ int got = 0;
+ int rc = 0;
pages = kmalloc(sizeof(*pages) * num_pages, GFP_NOFS);
if (!pages)
return ERR_PTR(-ENOMEM);
down_read(¤t->mm->mmap_sem);
- rc = get_user_pages(current, current->mm, (unsigned long)data,
- num_pages, write_page, 0, pages, NULL);
+ while (got < num_pages) {
+ rc = get_user_pages(current, current->mm,
+ (unsigned long)data + ((unsigned long)got * PAGE_SIZE),
+ num_pages - got, write_page, 0, pages + got, NULL);
+ if (rc < 0)
+ break;
+ BUG_ON(rc == 0);
+ got += rc;
+ }
up_read(¤t->mm->mmap_sem);
- if (rc < num_pages)
+ if (rc < 0)
goto fail;
return pages;
fail:
- ceph_put_page_vector(pages, rc > 0 ? rc : 0, false);
+ ceph_put_page_vector(pages, got, false);
return ERR_PTR(rc);
}
EXPORT_SYMBOL(ceph_get_direct_page_vector);
void dev_load(struct net *net, const char *name)
{
struct net_device *dev;
+ int no_module;
rcu_read_lock();
dev = dev_get_by_name_rcu(net, name);
rcu_read_unlock();
- if (!dev && capable(CAP_NET_ADMIN))
- request_module("%s", name);
+ no_module = !dev;
+ if (no_module && capable(CAP_NET_ADMIN))
+ no_module = request_module("netdev-%s", name);
+ if (no_module && capable(CAP_SYS_MODULE)) {
+ if (!request_module("%s", name))
+ pr_err("Loading kernel module for a network device "
+"with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-%s "
+"instead\n", name);
+ }
}
EXPORT_SYMBOL(dev_load);
MODULE_LICENSE("GPL");
MODULE_ALIAS_RTNL_LINK("gre");
MODULE_ALIAS_RTNL_LINK("gretap");
-MODULE_ALIAS("gre0");
+MODULE_ALIAS_NETDEV("gre0");
module_init(ipip_init);
module_exit(ipip_fini);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("tunl0");
+MODULE_ALIAS_NETDEV("tunl0");
module_init(sit_init);
module_exit(sit_cleanup);
MODULE_LICENSE("GPL");
-MODULE_ALIAS("sit0");
+MODULE_ALIAS_NETDEV("sit0");
{0x11, AC_VERB_SET_PROC_COEF, 0x0008},
{0x11, AC_VERB_SET_PROC_STATE, 0x00},
+#if 0 /* Don't to set to D3 as we are in power-up sequence */
{0x07, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Rx: D3 */
{0x08, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Tx: D3 */
/*{0x01, AC_VERB_SET_POWER_STATE, 0x03},*/ /* AFG: D3 This is already handled */
+#endif
{} /* terminator */
};
{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
+/* 17 is known to be absent */
{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_nvhdmi_8ch_89 },
MODULE_ALIAS("snd-hda-codec-id:10de0012");
MODULE_ALIAS("snd-hda-codec-id:10de0013");
MODULE_ALIAS("snd-hda-codec-id:10de0014");
+MODULE_ALIAS("snd-hda-codec-id:10de0015");
+MODULE_ALIAS("snd-hda-codec-id:10de0016");
MODULE_ALIAS("snd-hda-codec-id:10de0018");
MODULE_ALIAS("snd-hda-codec-id:10de0019");
MODULE_ALIAS("snd-hda-codec-id:10de001a");
nid = spec->autocfg.hp_pins[i];
if (!nid)
break;
- if (snd_hda_jack_detect(codec, nid)) {
- spec->jack_present = 1;
- break;
- }
- alc_report_jack(codec, spec->autocfg.hp_pins[i]);
+ alc_report_jack(codec, nid);
+ spec->jack_present |= snd_hda_jack_detect(codec, nid);
}
mute = spec->jack_present ? HDA_AMP_MUTE : 0;
SND_PCI_QUIRK(0x1043, 0x11e3, "ASUS U33Jc", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x1273, "ASUS UL80Jt", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x1283, "ASUS U53Jc", ALC269_AMIC),
- SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82Jv", ALC269_AMIC),
+ SND_PCI_QUIRK(0x1043, 0x12b3, "ASUS N82JV", ALC269VB_AMIC),
SND_PCI_QUIRK(0x1043, 0x12d3, "ASUS N61Jv", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x13a3, "ASUS UL30Vt", ALC269_AMIC),
SND_PCI_QUIRK(0x1043, 0x1373, "ASUS G73JX", ALC269_AMIC),
unsigned int aif1clk_enable:1;
unsigned int aif2clk_enable:1;
+
+ unsigned int aif1clk_disable:1;
+ unsigned int aif2clk_disable:1;
};
static int wm8994_readable(unsigned int reg)
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
- if (wm8994->aif1clk_enable)
+ if (wm8994->aif1clk_enable) {
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK,
WM8994_AIF1CLK_ENA);
- if (wm8994->aif2clk_enable)
+ wm8994->aif1clk_enable = 0;
+ }
+ if (wm8994->aif2clk_enable) {
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK,
WM8994_AIF2CLK_ENA);
+ wm8994->aif2clk_enable = 0;
+ }
break;
}
switch (event) {
case SND_SOC_DAPM_POST_PMD:
- if (wm8994->aif1clk_enable) {
+ if (wm8994->aif1clk_disable) {
snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
WM8994_AIF1CLK_ENA_MASK, 0);
- wm8994->aif1clk_enable = 0;
+ wm8994->aif1clk_disable = 0;
}
- if (wm8994->aif2clk_enable) {
+ if (wm8994->aif2clk_disable) {
snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
WM8994_AIF2CLK_ENA_MASK, 0);
- wm8994->aif2clk_enable = 0;
+ wm8994->aif2clk_disable = 0;
}
break;
}
case SND_SOC_DAPM_PRE_PMU:
wm8994->aif1clk_enable = 1;
break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8994->aif1clk_disable = 1;
+ break;
}
return 0;
case SND_SOC_DAPM_PRE_PMU:
wm8994->aif2clk_enable = 1;
break;
+ case SND_SOC_DAPM_POST_PMD:
+ wm8994->aif2clk_disable = 1;
+ break;
}
return 0;
}
+static int adc_mux_ev(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ late_enable_ev(w, kcontrol, event);
+ return 0;
+}
+
static int dac_ev(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
};
+static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = {
+SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux,
+ adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
+};
+
+static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = {
+SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
+SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
+};
+
static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("DMIC1DAT"),
SND_SOC_DAPM_INPUT("DMIC2DAT"),
SND_SOC_DAPM_ADC("ADCL", NULL, SND_SOC_NOPM, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
-SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
-SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
-
SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
if (wm8994->revision < 4) {
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
ARRAY_SIZE(wm8994_lateclk_revd_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_adc_revd_widgets,
+ ARRAY_SIZE(wm8994_adc_revd_widgets));
snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
ARRAY_SIZE(wm8994_dac_revd_widgets));
} else {
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
ARRAY_SIZE(wm8994_lateclk_widgets));
+ snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
+ ARRAY_SIZE(wm8994_adc_widgets));
snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
ARRAY_SIZE(wm8994_dac_widgets));
}
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
wm9081->control_type = SND_SOC_I2C;
wm9081->control_data = i2c;
+ if (dev_get_platdata(&i2c->dev))
+ memcpy(&wm9081->retune, dev_get_platdata(&i2c->dev),
+ sizeof(wm9081->retune));
+
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm9081, &wm9081_dai, 1);
if (ret < 0)
const char *name, bool is_kallsyms)
{
const size_t size = PATH_MAX;
- char *realname = realpath(name, NULL),
- *filename = malloc(size),
+ char *realname, *filename = malloc(size),
*linkname = malloc(size), *targetname;
int len, err = -1;
+ if (is_kallsyms)
+ realname = (char *)name;
+ else
+ realname = realpath(name, NULL);
+
if (realname == NULL || filename == NULL || linkname == NULL)
goto out_free;
if (symlink(targetname, linkname) == 0)
err = 0;
out_free:
- free(realname);
+ if (!is_kallsyms)
+ free(realname);
free(filename);
free(linkname);
return err;
int err = -1, fd;
char symfs_vmlinux[PATH_MAX];
- snprintf(symfs_vmlinux, sizeof(symfs_vmlinux), "%s/%s",
+ snprintf(symfs_vmlinux, sizeof(symfs_vmlinux), "%s%s",
symbol_conf.symfs, vmlinux);
fd = open(symfs_vmlinux, O_RDONLY);
if (fd < 0)
projects / linux-flexiantxendom0-natty.git / commitdiff