drivers/net/wireless/ath/ath9k/main.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/nl80211.h>
  18 #include "ath9k.h"
  19 #include "btcoex.h"
  20
  21 static void ath_update_txpow(struct ath_softc *sc)
  22 {
  23         struct ath_hw *ah = sc->sc_ah;
  24
  25         if (sc->curtxpow != sc->config.txpowlimit) {
  26                 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
  27                 /* read back in case value is clamped */
  28                 sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
  29         }
  30 }
  31
  32 static u8 parse_mpdudensity(u8 mpdudensity)
  33 {
  34         /*
  35          * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
  36          *   0 for no restriction
  37          *   1 for 1/4 us
  38          *   2 for 1/2 us
  39          *   3 for 1 us
  40          *   4 for 2 us
  41          *   5 for 4 us
  42          *   6 for 8 us
  43          *   7 for 16 us
  44          */
  45         switch (mpdudensity) {
  46         case 0:
  47                 return 0;
  48         case 1:
  49         case 2:
  50         case 3:
  51                 /* Our lower layer calculations limit our precision to
  52                    1 microsecond */
  53                 return 1;
  54         case 4:
  55                 return 2;
  56         case 5:
  57                 return 4;
  58         case 6:
  59                 return 8;
  60         case 7:
  61                 return 16;
  62         default:
  63                 return 0;
  64         }
  65 }
  66
  67 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
  68                                                 struct ieee80211_hw *hw)
  69 {
  70         struct ieee80211_channel *curchan = hw->conf.channel;
  71         struct ath9k_channel *channel;
  72         u8 chan_idx;
  73
  74         chan_idx = curchan->hw_value;
  75         channel = &sc->sc_ah->channels[chan_idx];
  76         ath9k_update_ichannel(sc, hw, channel);
  77         return channel;
  78 }
  79
  80 bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
  81 {
  82         unsigned long flags;
  83         bool ret;
  84
  85         spin_lock_irqsave(&sc->sc_pm_lock, flags);
  86         ret = ath9k_hw_setpower(sc->sc_ah, mode);
  87         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
  88
  89         return ret;
  90 }
  91
  92 void ath9k_ps_wakeup(struct ath_softc *sc)
  93 {
  94         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
  95         unsigned long flags;
  96         enum ath9k_power_mode power_mode;
  97
  98         spin_lock_irqsave(&sc->sc_pm_lock, flags);
  99         if (++sc->ps_usecount != 1)
 100                 goto unlock;
 101
 102         power_mode = sc->sc_ah->power_mode;
 103         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 104
 105         /*
 106          * While the hardware is asleep, the cycle counters contain no
 107          * useful data. Better clear them now so that they don't mess up
 108          * survey data results.
 109          */
 110         if (power_mode != ATH9K_PM_AWAKE) {
 111                 spin_lock(&common->cc_lock);
 112                 ath_hw_cycle_counters_update(common);
 113                 memset(&common->cc_survey, 0, sizeof(common->cc_survey));
 114                 spin_unlock(&common->cc_lock);
 115         }
 116
 117  unlock:
 118         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 119 }
 120
 121 void ath9k_ps_restore(struct ath_softc *sc)
 122 {
 123         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 124         unsigned long flags;
 125
 126         spin_lock_irqsave(&sc->sc_pm_lock, flags);
 127         if (--sc->ps_usecount != 0)
 128                 goto unlock;
 129
 130         spin_lock(&common->cc_lock);
 131         ath_hw_cycle_counters_update(common);
 132         spin_unlock(&common->cc_lock);
 133
 134         if (sc->ps_idle)
 135                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
 136         else if (sc->ps_enabled &&
 137                  !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 138                               PS_WAIT_FOR_CAB |
 139                               PS_WAIT_FOR_PSPOLL_DATA |
 140                               PS_WAIT_FOR_TX_ACK)))
 141                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 142
 143  unlock:
 144         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 145 }
 146
 147 static void ath_start_ani(struct ath_common *common)
 148 {
 149         struct ath_hw *ah = common->ah;
 150         unsigned long timestamp = jiffies_to_msecs(jiffies);
 151         struct ath_softc *sc = (struct ath_softc *) common->priv;
 152
 153         if (!(sc->sc_flags & SC_OP_ANI_RUN))
 154                 return;
 155
 156         if (sc->sc_flags & SC_OP_OFFCHANNEL)
 157                 return;
 158
 159         common->ani.longcal_timer = timestamp;
 160         common->ani.shortcal_timer = timestamp;
 161         common->ani.checkani_timer = timestamp;
 162
 163         mod_timer(&common->ani.timer,
 164                   jiffies +
 165                         msecs_to_jiffies((u32)ah->config.ani_poll_interval));
 166 }
 167
 168 static void ath_update_survey_nf(struct ath_softc *sc, int channel)
 169 {
 170         struct ath_hw *ah = sc->sc_ah;
 171         struct ath9k_channel *chan = &ah->channels[channel];
 172         struct survey_info *survey = &sc->survey[channel];
 173
 174         if (chan->noisefloor) {
 175                 survey->filled |= SURVEY_INFO_NOISE_DBM;
 176                 survey->noise = chan->noisefloor;
 177         }
 178 }
 179
 180 static void ath_update_survey_stats(struct ath_softc *sc)
 181 {
 182         struct ath_hw *ah = sc->sc_ah;
 183         struct ath_common *common = ath9k_hw_common(ah);
 184         int pos = ah->curchan - &ah->channels[0];
 185         struct survey_info *survey = &sc->survey[pos];
 186         struct ath_cycle_counters *cc = &common->cc_survey;
 187         unsigned int div = common->clockrate * 1000;
 188
 189         if (!ah->curchan)
 190                 return;
 191
 192         if (ah->power_mode == ATH9K_PM_AWAKE)
 193                 ath_hw_cycle_counters_update(common);
 194
 195         if (cc->cycles > 0) {
 196                 survey->filled |= SURVEY_INFO_CHANNEL_TIME |
 197                         SURVEY_INFO_CHANNEL_TIME_BUSY |
 198                         SURVEY_INFO_CHANNEL_TIME_RX |
 199                         SURVEY_INFO_CHANNEL_TIME_TX;
 200                 survey->channel_time += cc->cycles / div;
 201                 survey->channel_time_busy += cc->rx_busy / div;
 202                 survey->channel_time_rx += cc->rx_frame / div;
 203                 survey->channel_time_tx += cc->tx_frame / div;
 204         }
 205         memset(cc, 0, sizeof(*cc));
 206
 207         ath_update_survey_nf(sc, pos);
 208 }
 209
 210 /*
 211  * Set/change channels.  If the channel is really being changed, it's done
 212  * by reseting the chip.  To accomplish this we must first cleanup any pending
 213  * DMA, then restart stuff.
 214 */
 215 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 216                     struct ath9k_channel *hchan)
 217 {
 218         struct ath_wiphy *aphy = hw->priv;
 219         struct ath_hw *ah = sc->sc_ah;
 220         struct ath_common *common = ath9k_hw_common(ah);
 221         struct ieee80211_conf *conf = &common->hw->conf;
 222         bool fastcc = true, stopped;
 223         struct ieee80211_channel *channel = hw->conf.channel;
 224         struct ath9k_hw_cal_data *caldata = NULL;
 225         int r;
 226
 227         if (sc->sc_flags & SC_OP_INVALID)
 228                 return -EIO;
 229
 230         del_timer_sync(&common->ani.timer);
 231         cancel_work_sync(&sc->paprd_work);
 232         cancel_work_sync(&sc->hw_check_work);
 233         cancel_delayed_work_sync(&sc->tx_complete_work);
 234
 235         ath9k_ps_wakeup(sc);
 236
 237         spin_lock_bh(&sc->sc_pcu_lock);
 238
 239         /*
 240          * This is only performed if the channel settings have
 241          * actually changed.
 242          *
 243          * To switch channels clear any pending DMA operations;
 244          * wait long enough for the RX fifo to drain, reset the
 245          * hardware at the new frequency, and then re-enable
 246          * the relevant bits of the h/w.
 247          */
 248         ath9k_hw_disable_interrupts(ah);
 249         stopped = ath_drain_all_txq(sc, false);
 250
 251         if (!ath_stoprecv(sc))
 252                 stopped = false;
 253
 254         /* XXX: do not flush receive queue here. We don't want
 255          * to flush data frames already in queue because of
 256          * changing channel. */
 257
 258         if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
 259                 fastcc = false;
 260
 261         if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
 262                 caldata = &aphy->caldata;
 263
 264         ath_dbg(common, ATH_DBG_CONFIG,
 265                 "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
 266                 sc->sc_ah->curchan->channel,
 267                 channel->center_freq, conf_is_ht40(conf),
 268                 fastcc);
 269
 270         r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 271         if (r) {
 272                 ath_err(common,
 273                         "Unable to reset channel (%u MHz), reset status %d\n",
 274                         channel->center_freq, r);
 275                 goto ps_restore;
 276         }
 277
 278         if (ath_startrecv(sc) != 0) {
 279                 ath_err(common, "Unable to restart recv logic\n");
 280                 r = -EIO;
 281                 goto ps_restore;
 282         }
 283
 284         ath_update_txpow(sc);
 285         ath9k_hw_set_interrupts(ah, ah->imask);
 286
 287         if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
 288                 if (sc->sc_flags & SC_OP_BEACONS)
 289                         ath_beacon_config(sc, NULL);
 290                 ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 291                 ath_start_ani(common);
 292         }
 293
 294  ps_restore:
 295         spin_unlock_bh(&sc->sc_pcu_lock);
 296
 297         ath9k_ps_restore(sc);
 298         return r;
 299 }
 300
 301 static void ath_paprd_activate(struct ath_softc *sc)
 302 {
 303         struct ath_hw *ah = sc->sc_ah;
 304         struct ath9k_hw_cal_data *caldata = ah->caldata;
 305         struct ath_common *common = ath9k_hw_common(ah);
 306         int chain;
 307
 308         if (!caldata || !caldata->paprd_done)
 309                 return;
 310
 311         ath9k_ps_wakeup(sc);
 312         ar9003_paprd_enable(ah, false);
 313         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 314                 if (!(common->tx_chainmask & BIT(chain)))
 315                         continue;
 316
 317                 ar9003_paprd_populate_single_table(ah, caldata, chain);
 318         }
 319
 320         ar9003_paprd_enable(ah, true);
 321         ath9k_ps_restore(sc);
 322 }
 323
 324 static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain)
 325 {
 326         struct ieee80211_hw *hw = sc->hw;
 327         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 328         struct ath_hw *ah = sc->sc_ah;
 329         struct ath_common *common = ath9k_hw_common(ah);
 330         struct ath_tx_control txctl;
 331         int time_left;
 332
 333         memset(&txctl, 0, sizeof(txctl));
 334         txctl.txq = sc->tx.txq_map[WME_AC_BE];
 335
 336         memset(tx_info, 0, sizeof(*tx_info));
 337         tx_info->band = hw->conf.channel->band;
 338         tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
 339         tx_info->control.rates[0].idx = 0;
 340         tx_info->control.rates[0].count = 1;
 341         tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
 342         tx_info->control.rates[1].idx = -1;
 343
 344         init_completion(&sc->paprd_complete);
 345         txctl.paprd = BIT(chain);
 346
 347         if (ath_tx_start(hw, skb, &txctl) != 0) {
 348                 ath_dbg(common, ATH_DBG_XMIT, "PAPRD TX failed\n");
 349                 dev_kfree_skb_any(skb);
 350                 return false;
 351         }
 352
 353         time_left = wait_for_completion_timeout(&sc->paprd_complete,
 354                         msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
 355
 356         if (!time_left)
 357                 ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
 358                         "Timeout waiting for paprd training on TX chain %d\n",
 359                         chain);
 360
 361         return !!time_left;
 362 }
 363
 364 void ath_paprd_calibrate(struct work_struct *work)
 365 {
 366         struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
 367         struct ieee80211_hw *hw = sc->hw;
 368         struct ath_hw *ah = sc->sc_ah;
 369         struct ieee80211_hdr *hdr;
 370         struct sk_buff *skb = NULL;
 371         struct ath9k_hw_cal_data *caldata = ah->caldata;
 372         struct ath_common *common = ath9k_hw_common(ah);
 373         int ftype;
 374         int chain_ok = 0;
 375         int chain;
 376         int len = 1800;
 377
 378         if (!caldata)
 379                 return;
 380
 381         if (ar9003_paprd_init_table(ah) < 0)
 382                 return;
 383
 384         skb = alloc_skb(len, GFP_KERNEL);
 385         if (!skb)
 386                 return;
 387
 388         skb_put(skb, len);
 389         memset(skb->data, 0, len);
 390         hdr = (struct ieee80211_hdr *)skb->data;
 391         ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
 392         hdr->frame_control = cpu_to_le16(ftype);
 393         hdr->duration_id = cpu_to_le16(10);
 394         memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
 395         memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 396         memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 397
 398         ath9k_ps_wakeup(sc);
 399         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 400                 if (!(common->tx_chainmask & BIT(chain)))
 401                         continue;
 402
 403                 chain_ok = 0;
 404
 405                 ath_dbg(common, ATH_DBG_CALIBRATE,
 406                         "Sending PAPRD frame for thermal measurement "
 407                         "on chain %d\n", chain);
 408                 if (!ath_paprd_send_frame(sc, skb, chain))
 409                         goto fail_paprd;
 410
 411                 ar9003_paprd_setup_gain_table(ah, chain);
 412
 413                 ath_dbg(common, ATH_DBG_CALIBRATE,
 414                         "Sending PAPRD training frame on chain %d\n", chain);
 415                 if (!ath_paprd_send_frame(sc, skb, chain))
 416                         goto fail_paprd;
 417
 418                 if (!ar9003_paprd_is_done(ah))
 419                         break;
 420
 421                 if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
 422                         break;
 423
 424                 chain_ok = 1;
 425         }
 426         kfree_skb(skb);
 427
 428         if (chain_ok) {
 429                 caldata->paprd_done = true;
 430                 ath_paprd_activate(sc);
 431         }
 432
 433 fail_paprd:
 434         ath9k_ps_restore(sc);
 435 }
 436
 437 /*
 438  *  This routine performs the periodic noise floor calibration function
 439  *  that is used to adjust and optimize the chip performance.  This
 440  *  takes environmental changes (location, temperature) into account.
 441  *  When the task is complete, it reschedules itself depending on the
 442  *  appropriate interval that was calculated.
 443  */
 444 void ath_ani_calibrate(unsigned long data)
 445 {
 446         struct ath_softc *sc = (struct ath_softc *)data;
 447         struct ath_hw *ah = sc->sc_ah;
 448         struct ath_common *common = ath9k_hw_common(ah);
 449         bool longcal = false;
 450         bool shortcal = false;
 451         bool aniflag = false;
 452         unsigned int timestamp = jiffies_to_msecs(jiffies);
 453         u32 cal_interval, short_cal_interval, long_cal_interval;
 454         unsigned long flags;
 455
 456         if (ah->caldata && ah->caldata->nfcal_interference)
 457                 long_cal_interval = ATH_LONG_CALINTERVAL_INT;
 458         else
 459                 long_cal_interval = ATH_LONG_CALINTERVAL;
 460
 461         short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
 462                 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
 463
 464         /* Only calibrate if awake */
 465         if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
 466                 goto set_timer;
 467
 468         ath9k_ps_wakeup(sc);
 469
 470         /* Long calibration runs independently of short calibration. */
 471         if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
 472                 longcal = true;
 473                 ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 474                 common->ani.longcal_timer = timestamp;
 475         }
 476
 477         /* Short calibration applies only while caldone is false */
 478         if (!common->ani.caldone) {
 479                 if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 480                         shortcal = true;
 481                         ath_dbg(common, ATH_DBG_ANI,
 482                                 "shortcal @%lu\n", jiffies);
 483                         common->ani.shortcal_timer = timestamp;
 484                         common->ani.resetcal_timer = timestamp;
 485                 }
 486         } else {
 487                 if ((timestamp - common->ani.resetcal_timer) >=
 488                     ATH_RESTART_CALINTERVAL) {
 489                         common->ani.caldone = ath9k_hw_reset_calvalid(ah);
 490                         if (common->ani.caldone)
 491                                 common->ani.resetcal_timer = timestamp;
 492                 }
 493         }
 494
 495         /* Verify whether we must check ANI */
 496         if ((timestamp - common->ani.checkani_timer) >=
 497              ah->config.ani_poll_interval) {
 498                 aniflag = true;
 499                 common->ani.checkani_timer = timestamp;
 500         }
 501
 502         /* Skip all processing if there's nothing to do. */
 503         if (longcal || shortcal || aniflag) {
 504                 /* Call ANI routine if necessary */
 505                 if (aniflag) {
 506                         spin_lock_irqsave(&common->cc_lock, flags);
 507                         ath9k_hw_ani_monitor(ah, ah->curchan);
 508                         ath_update_survey_stats(sc);
 509                         spin_unlock_irqrestore(&common->cc_lock, flags);
 510                 }
 511
 512                 /* Perform calibration if necessary */
 513                 if (longcal || shortcal) {
 514                         common->ani.caldone =
 515                                 ath9k_hw_calibrate(ah,
 516                                                    ah->curchan,
 517                                                    common->rx_chainmask,
 518                                                    longcal);
 519                 }
 520         }
 521
 522         ath9k_ps_restore(sc);
 523
 524 set_timer:
 525         /*
 526         * Set timer interval based on previous results.
 527         * The interval must be the shortest necessary to satisfy ANI,
 528         * short calibration and long calibration.
 529         */
 530         cal_interval = ATH_LONG_CALINTERVAL;
 531         if (sc->sc_ah->config.enable_ani)
 532                 cal_interval = min(cal_interval,
 533                                    (u32)ah->config.ani_poll_interval);
 534         if (!common->ani.caldone)
 535                 cal_interval = min(cal_interval, (u32)short_cal_interval);
 536
 537         mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 538         if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
 539                 if (!ah->caldata->paprd_done)
 540                         ieee80211_queue_work(sc->hw, &sc->paprd_work);
 541                 else if (!ah->paprd_table_write_done)
 542                         ath_paprd_activate(sc);
 543         }
 544 }
 545
 546 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 547 {
 548         struct ath_node *an;
 549         struct ath_hw *ah = sc->sc_ah;
 550         an = (struct ath_node *)sta->drv_priv;
 551
 552         if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
 553                 sc->sc_flags |= SC_OP_ENABLE_APM;
 554
 555         if (sc->sc_flags & SC_OP_TXAGGR) {
 556                 ath_tx_node_init(sc, an);
 557                 an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 558                                      sta->ht_cap.ampdu_factor);
 559                 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
 560         }
 561 }
 562
 563 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 564 {
 565         struct ath_node *an = (struct ath_node *)sta->drv_priv;
 566
 567         if (sc->sc_flags & SC_OP_TXAGGR)
 568                 ath_tx_node_cleanup(sc, an);
 569 }
 570
 571 void ath_hw_check(struct work_struct *work)
 572 {
 573         struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
 574         int i;
 575
 576         ath9k_ps_wakeup(sc);
 577
 578         for (i = 0; i < 3; i++) {
 579                 if (ath9k_hw_check_alive(sc->sc_ah))
 580                         goto out;
 581
 582                 msleep(1);
 583         }
 584         ath_reset(sc, true);
 585
 586 out:
 587         ath9k_ps_restore(sc);
 588 }
 589
 590 void ath9k_tasklet(unsigned long data)
 591 {
 592         struct ath_softc *sc = (struct ath_softc *)data;
 593         struct ath_hw *ah = sc->sc_ah;
 594         struct ath_common *common = ath9k_hw_common(ah);
 595
 596         u32 status = sc->intrstatus;
 597         u32 rxmask;
 598
 599         if (status & ATH9K_INT_FATAL) {
 600                 ath_reset(sc, true);
 601                 return;
 602         }
 603
 604         ath9k_ps_wakeup(sc);
 605         spin_lock(&sc->sc_pcu_lock);
 606
 607         if (!ath9k_hw_check_alive(ah))
 608                 ieee80211_queue_work(sc->hw, &sc->hw_check_work);
 609
 610         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 611                 rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
 612                           ATH9K_INT_RXORN);
 613         else
 614                 rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 615
 616         if (status & rxmask) {
 617                 /* Check for high priority Rx first */
 618                 if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 619                     (status & ATH9K_INT_RXHP))
 620                         ath_rx_tasklet(sc, 0, true);
 621
 622                 ath_rx_tasklet(sc, 0, false);
 623         }
 624
 625         if (status & ATH9K_INT_TX) {
 626                 if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 627                         ath_tx_edma_tasklet(sc);
 628                 else
 629                         ath_tx_tasklet(sc);
 630         }
 631
 632         if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
 633                 /*
 634                  * TSF sync does not look correct; remain awake to sync with
 635                  * the next Beacon.
 636                  */
 637                 ath_dbg(common, ATH_DBG_PS,
 638                         "TSFOOR - Sync with next Beacon\n");
 639                 sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
 640         }
 641
 642         if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 643                 if (status & ATH9K_INT_GENTIMER)
 644                         ath_gen_timer_isr(sc->sc_ah);
 645
 646         /* re-enable hardware interrupt */
 647         ath9k_hw_enable_interrupts(ah);
 648
 649         spin_unlock(&sc->sc_pcu_lock);
 650         ath9k_ps_restore(sc);
 651 }
 652
 653 irqreturn_t ath_isr(int irq, void *dev)
 654 {
 655 #define SCHED_INTR (                            \
 656                 ATH9K_INT_FATAL |               \
 657                 ATH9K_INT_RXORN |               \
 658                 ATH9K_INT_RXEOL |               \
 659                 ATH9K_INT_RX |                  \
 660                 ATH9K_INT_RXLP |                \
 661                 ATH9K_INT_RXHP |                \
 662                 ATH9K_INT_TX |                  \
 663                 ATH9K_INT_BMISS |               \
 664                 ATH9K_INT_CST |                 \
 665                 ATH9K_INT_TSFOOR |              \
 666                 ATH9K_INT_GENTIMER)
 667
 668         struct ath_softc *sc = dev;
 669         struct ath_hw *ah = sc->sc_ah;
 670         struct ath_common *common = ath9k_hw_common(ah);
 671         enum ath9k_int status;
 672         bool sched = false;
 673
 674         /*
 675          * The hardware is not ready/present, don't
 676          * touch anything. Note this can happen early
 677          * on if the IRQ is shared.
 678          */
 679         if (sc->sc_flags & SC_OP_INVALID)
 680                 return IRQ_NONE;
 681
 682
 683         /* shared irq, not for us */
 684
 685         if (!ath9k_hw_intrpend(ah))
 686                 return IRQ_NONE;
 687
 688         /*
 689          * Figure out the reason(s) for the interrupt.  Note
 690          * that the hal returns a pseudo-ISR that may include
 691          * bits we haven't explicitly enabled so we mask the
 692          * value to insure we only process bits we requested.
 693          */
 694         ath9k_hw_getisr(ah, &status);   /* NB: clears ISR too */
 695         status &= ah->imask;    /* discard unasked-for bits */
 696
 697         /*
 698          * If there are no status bits set, then this interrupt was not
 699          * for me (should have been caught above).
 700          */
 701         if (!status)
 702                 return IRQ_NONE;
 703
 704         /* Cache the status */
 705         sc->intrstatus = status;
 706
 707         if (status & SCHED_INTR)
 708                 sched = true;
 709
 710         /*
 711          * If a FATAL or RXORN interrupt is received, we have to reset the
 712          * chip immediately.
 713          */
 714         if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
 715             !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
 716                 goto chip_reset;
 717
 718         if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 719             (status & ATH9K_INT_BB_WATCHDOG)) {
 720
 721                 spin_lock(&common->cc_lock);
 722                 ath_hw_cycle_counters_update(common);
 723                 ar9003_hw_bb_watchdog_dbg_info(ah);
 724                 spin_unlock(&common->cc_lock);
 725
 726                 goto chip_reset;
 727         }
 728
 729         if (status & ATH9K_INT_SWBA)
 730                 tasklet_schedule(&sc->bcon_tasklet);
 731
 732         if (status & ATH9K_INT_TXURN)
 733                 ath9k_hw_updatetxtriglevel(ah, true);
 734
 735         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 736                 if (status & ATH9K_INT_RXEOL) {
 737                         ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 738                         ath9k_hw_set_interrupts(ah, ah->imask);
 739                 }
 740         }
 741
 742         if (status & ATH9K_INT_MIB) {
 743                 /*
 744                  * Disable interrupts until we service the MIB
 745                  * interrupt; otherwise it will continue to
 746                  * fire.
 747                  */
 748                 ath9k_hw_disable_interrupts(ah);
 749                 /*
 750                  * Let the hal handle the event. We assume
 751                  * it will clear whatever condition caused
 752                  * the interrupt.
 753                  */
 754                 spin_lock(&common->cc_lock);
 755                 ath9k_hw_proc_mib_event(ah);
 756                 spin_unlock(&common->cc_lock);
 757                 ath9k_hw_enable_interrupts(ah);
 758         }
 759
 760         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 761                 if (status & ATH9K_INT_TIM_TIMER) {
 762                         if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
 763                                 goto chip_reset;
 764                         /* Clear RxAbort bit so that we can
 765                          * receive frames */
 766                         ath9k_setpower(sc, ATH9K_PM_AWAKE);
 767                         ath9k_hw_setrxabort(sc->sc_ah, 0);
 768                         sc->ps_flags |= PS_WAIT_FOR_BEACON;
 769                 }
 770
 771 chip_reset:
 772
 773         ath_debug_stat_interrupt(sc, status);
 774
 775         if (sched) {
 776                 /* turn off every interrupt */
 777                 ath9k_hw_disable_interrupts(ah);
 778                 tasklet_schedule(&sc->intr_tq);
 779         }
 780
 781         return IRQ_HANDLED;
 782
 783 #undef SCHED_INTR
 784 }
 785
 786 static u32 ath_get_extchanmode(struct ath_softc *sc,
 787                                struct ieee80211_channel *chan,
 788                                enum nl80211_channel_type channel_type)
 789 {
 790         u32 chanmode = 0;
 791
 792         switch (chan->band) {
 793         case IEEE80211_BAND_2GHZ:
 794                 switch(channel_type) {
 795                 case NL80211_CHAN_NO_HT:
 796                 case NL80211_CHAN_HT20:
 797                         chanmode = CHANNEL_G_HT20;
 798                         break;
 799                 case NL80211_CHAN_HT40PLUS:
 800                         chanmode = CHANNEL_G_HT40PLUS;
 801                         break;
 802                 case NL80211_CHAN_HT40MINUS:
 803                         chanmode = CHANNEL_G_HT40MINUS;
 804                         break;
 805                 }
 806                 break;
 807         case IEEE80211_BAND_5GHZ:
 808                 switch(channel_type) {
 809                 case NL80211_CHAN_NO_HT:
 810                 case NL80211_CHAN_HT20:
 811                         chanmode = CHANNEL_A_HT20;
 812                         break;
 813                 case NL80211_CHAN_HT40PLUS:
 814                         chanmode = CHANNEL_A_HT40PLUS;
 815                         break;
 816                 case NL80211_CHAN_HT40MINUS:
 817                         chanmode = CHANNEL_A_HT40MINUS;
 818                         break;
 819                 }
 820                 break;
 821         default:
 822                 break;
 823         }
 824
 825         return chanmode;
 826 }
 827
 828 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 829                                  struct ieee80211_hw *hw,
 830                                  struct ieee80211_vif *vif,
 831                                  struct ieee80211_bss_conf *bss_conf)
 832 {
 833         struct ath_wiphy *aphy = hw->priv;
 834         struct ath_hw *ah = sc->sc_ah;
 835         struct ath_common *common = ath9k_hw_common(ah);
 836
 837         if (bss_conf->assoc) {
 838                 ath_dbg(common, ATH_DBG_CONFIG,
 839                         "Bss Info ASSOC %d, bssid: %pM\n",
 840                         bss_conf->aid, common->curbssid);
 841
 842                 /* New association, store aid */
 843                 common->curaid = bss_conf->aid;
 844                 ath9k_hw_write_associd(ah);
 845
 846                 /*
 847                  * Request a re-configuration of Beacon related timers
 848                  * on the receipt of the first Beacon frame (i.e.,
 849                  * after time sync with the AP).
 850                  */
 851                 sc->ps_flags |= PS_BEACON_SYNC;
 852
 853                 /* Configure the beacon */
 854                 ath_beacon_config(sc, vif);
 855
 856                 /* Reset rssi stats */
 857                 aphy->last_rssi = ATH_RSSI_DUMMY_MARKER;
 858                 sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 859
 860                 sc->sc_flags |= SC_OP_ANI_RUN;
 861                 ath_start_ani(common);
 862         } else {
 863                 ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 864                 common->curaid = 0;
 865                 /* Stop ANI */
 866                 sc->sc_flags &= ~SC_OP_ANI_RUN;
 867                 del_timer_sync(&common->ani.timer);
 868         }
 869 }
 870
 871 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 872 {
 873         struct ath_hw *ah = sc->sc_ah;
 874         struct ath_common *common = ath9k_hw_common(ah);
 875         struct ieee80211_channel *channel = hw->conf.channel;
 876         int r;
 877
 878         ath9k_ps_wakeup(sc);
 879         spin_lock_bh(&sc->sc_pcu_lock);
 880
 881         ath9k_hw_configpcipowersave(ah, 0, 0);
 882
 883         if (!ah->curchan)
 884                 ah->curchan = ath_get_curchannel(sc, sc->hw);
 885
 886         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 887         if (r) {
 888                 ath_err(common,
 889                         "Unable to reset channel (%u MHz), reset status %d\n",
 890                         channel->center_freq, r);
 891         }
 892
 893         ath_update_txpow(sc);
 894         if (ath_startrecv(sc) != 0) {
 895                 ath_err(common, "Unable to restart recv logic\n");
 896                 goto out;
 897         }
 898         if (sc->sc_flags & SC_OP_BEACONS)
 899                 ath_beacon_config(sc, NULL);    /* restart beacons */
 900
 901         /* Re-Enable  interrupts */
 902         ath9k_hw_set_interrupts(ah, ah->imask);
 903
 904         /* Enable LED */
 905         ath9k_hw_cfg_output(ah, ah->led_pin,
 906                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 907         ath9k_hw_set_gpio(ah, ah->led_pin, 0);
 908
 909         ieee80211_wake_queues(hw);
 910 out:
 911         spin_unlock_bh(&sc->sc_pcu_lock);
 912
 913         ath9k_ps_restore(sc);
 914 }
 915
 916 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 917 {
 918         struct ath_hw *ah = sc->sc_ah;
 919         struct ieee80211_channel *channel = hw->conf.channel;
 920         int r;
 921
 922         ath9k_ps_wakeup(sc);
 923         spin_lock_bh(&sc->sc_pcu_lock);
 924
 925         ieee80211_stop_queues(hw);
 926
 927         /*
 928          * Keep the LED on when the radio is disabled
 929          * during idle unassociated state.
 930          */
 931         if (!sc->ps_idle) {
 932                 ath9k_hw_set_gpio(ah, ah->led_pin, 1);
 933                 ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
 934         }
 935
 936         /* Disable interrupts */
 937         ath9k_hw_disable_interrupts(ah);
 938
 939         ath_drain_all_txq(sc, false);   /* clear pending tx frames */
 940
 941         ath_stoprecv(sc);               /* turn off frame recv */
 942         ath_flushrecv(sc);              /* flush recv queue */
 943
 944         if (!ah->curchan)
 945                 ah->curchan = ath_get_curchannel(sc, hw);
 946
 947         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 948         if (r) {
 949                 ath_err(ath9k_hw_common(sc->sc_ah),
 950                         "Unable to reset channel (%u MHz), reset status %d\n",
 951                         channel->center_freq, r);
 952         }
 953
 954         ath9k_hw_phy_disable(ah);
 955
 956         ath9k_hw_configpcipowersave(ah, 1, 1);
 957
 958         spin_unlock_bh(&sc->sc_pcu_lock);
 959         ath9k_ps_restore(sc);
 960 }
 961
 962 int ath_reset(struct ath_softc *sc, bool retry_tx)
 963 {
 964         struct ath_hw *ah = sc->sc_ah;
 965         struct ath_common *common = ath9k_hw_common(ah);
 966         struct ieee80211_hw *hw = sc->hw;
 967         int r;
 968
 969         /* Stop ANI */
 970         del_timer_sync(&common->ani.timer);
 971
 972         ath9k_ps_wakeup(sc);
 973         spin_lock_bh(&sc->sc_pcu_lock);
 974
 975         ieee80211_stop_queues(hw);
 976
 977         ath9k_hw_disable_interrupts(ah);
 978         ath_drain_all_txq(sc, retry_tx);
 979
 980         ath_stoprecv(sc);
 981         ath_flushrecv(sc);
 982
 983         r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 984         if (r)
 985                 ath_err(common,
 986                         "Unable to reset hardware; reset status %d\n", r);
 987
 988         if (ath_startrecv(sc) != 0)
 989                 ath_err(common, "Unable to start recv logic\n");
 990
 991         /*
 992          * We may be doing a reset in response to a request
 993          * that changes the channel so update any state that
 994          * might change as a result.
 995          */
 996         ath_update_txpow(sc);
 997
 998         if ((sc->sc_flags & SC_OP_BEACONS) || !(sc->sc_flags & (SC_OP_OFFCHANNEL)))
 999                 ath_beacon_config(sc, NULL);    /* restart beacons */
1000
1001         ath9k_hw_set_interrupts(ah, ah->imask);
1002
1003         if (retry_tx) {
1004                 int i;
1005                 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1006                         if (ATH_TXQ_SETUP(sc, i)) {
1007                                 spin_lock_bh(&sc->tx.txq[i].axq_lock);
1008                                 ath_txq_schedule(sc, &sc->tx.txq[i]);
1009                                 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
1010                         }
1011                 }
1012         }
1013
1014         ieee80211_wake_queues(hw);
1015         spin_unlock_bh(&sc->sc_pcu_lock);
1016
1017         /* Start ANI */
1018         ath_start_ani(common);
1019         ath9k_ps_restore(sc);
1020
1021         return r;
1022 }
1023
1024 /* XXX: Remove me once we don't depend on ath9k_channel for all
1025  * this redundant data */
1026 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1027                            struct ath9k_channel *ichan)
1028 {
1029         struct ieee80211_channel *chan = hw->conf.channel;
1030         struct ieee80211_conf *conf = &hw->conf;
1031
1032         ichan->channel = chan->center_freq;
1033         ichan->chan = chan;
1034
1035         if (chan->band == IEEE80211_BAND_2GHZ) {
1036                 ichan->chanmode = CHANNEL_G;
1037                 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
1038         } else {
1039                 ichan->chanmode = CHANNEL_A;
1040                 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1041         }
1042
1043         if (conf_is_ht(conf))
1044                 ichan->chanmode = ath_get_extchanmode(sc, chan,
1045                                             conf->channel_type);
1046 }
1047
1048 /**********************/
1049 /* mac80211 callbacks */
1050 /**********************/
1051
1052 static int ath9k_start(struct ieee80211_hw *hw)
1053 {
1054         struct ath_wiphy *aphy = hw->priv;
1055         struct ath_softc *sc = aphy->sc;
1056         struct ath_hw *ah = sc->sc_ah;
1057         struct ath_common *common = ath9k_hw_common(ah);
1058         struct ieee80211_channel *curchan = hw->conf.channel;
1059         struct ath9k_channel *init_channel;
1060         int r;
1061
1062         ath_dbg(common, ATH_DBG_CONFIG,
1063                 "Starting driver with initial channel: %d MHz\n",
1064                 curchan->center_freq);
1065
1066         ath9k_ps_wakeup(sc);
1067
1068         mutex_lock(&sc->mutex);
1069
1070         if (ath9k_wiphy_started(sc)) {
1071                 if (sc->chan_idx == curchan->hw_value) {
1072                         /*
1073                          * Already on the operational channel, the new wiphy
1074                          * can be marked active.
1075                          */
1076                         aphy->state = ATH_WIPHY_ACTIVE;
1077                         ieee80211_wake_queues(hw);
1078                 } else {
1079                         /*
1080                          * Another wiphy is on another channel, start the new
1081                          * wiphy in paused state.
1082                          */
1083                         aphy->state = ATH_WIPHY_PAUSED;
1084                         ieee80211_stop_queues(hw);
1085                 }
1086                 mutex_unlock(&sc->mutex);
1087                 return 0;
1088         }
1089         aphy->state = ATH_WIPHY_ACTIVE;
1090
1091         /* setup initial channel */
1092
1093         sc->chan_idx = curchan->hw_value;
1094
1095         init_channel = ath_get_curchannel(sc, hw);
1096
1097         /* Reset SERDES registers */
1098         ath9k_hw_configpcipowersave(ah, 0, 0);
1099
1100         /*
1101          * The basic interface to setting the hardware in a good
1102          * state is ``reset''.  On return the hardware is known to
1103          * be powered up and with interrupts disabled.  This must
1104          * be followed by initialization of the appropriate bits
1105          * and then setup of the interrupt mask.
1106          */
1107         spin_lock_bh(&sc->sc_pcu_lock);
1108         r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
1109         if (r) {
1110                 ath_err(common,
1111                         "Unable to reset hardware; reset status %d (freq %u MHz)\n",
1112                         r, curchan->center_freq);
1113                 spin_unlock_bh(&sc->sc_pcu_lock);
1114                 goto mutex_unlock;
1115         }
1116
1117         /*
1118          * This is needed only to setup initial state
1119          * but it's best done after a reset.
1120          */
1121         ath_update_txpow(sc);
1122
1123         /*
1124          * Setup the hardware after reset:
1125          * The receive engine is set going.
1126          * Frame transmit is handled entirely
1127          * in the frame output path; there's nothing to do
1128          * here except setup the interrupt mask.
1129          */
1130         if (ath_startrecv(sc) != 0) {
1131                 ath_err(common, "Unable to start recv logic\n");
1132                 r = -EIO;
1133                 spin_unlock_bh(&sc->sc_pcu_lock);
1134                 goto mutex_unlock;
1135         }
1136         spin_unlock_bh(&sc->sc_pcu_lock);
1137
1138         /* Setup our intr mask. */
1139         ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
1140                     ATH9K_INT_RXORN | ATH9K_INT_FATAL |
1141                     ATH9K_INT_GLOBAL;
1142
1143         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
1144                 ah->imask |= ATH9K_INT_RXHP |
1145                              ATH9K_INT_RXLP |
1146                              ATH9K_INT_BB_WATCHDOG;
1147         else
1148                 ah->imask |= ATH9K_INT_RX;
1149
1150         ah->imask |= ATH9K_INT_GTT;
1151
1152         if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
1153                 ah->imask |= ATH9K_INT_CST;
1154
1155         sc->sc_flags &= ~SC_OP_INVALID;
1156         sc->sc_ah->is_monitoring = false;
1157
1158         /* Disable BMISS interrupt when we're not associated */
1159         ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1160         ath9k_hw_set_interrupts(ah, ah->imask);
1161
1162         ieee80211_wake_queues(hw);
1163
1164         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
1165
1166         if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
1167             !ah->btcoex_hw.enabled) {
1168                 ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
1169                                            AR_STOMP_LOW_WLAN_WGHT);
1170                 ath9k_hw_btcoex_enable(ah);
1171
1172                 if (common->bus_ops->bt_coex_prep)
1173                         common->bus_ops->bt_coex_prep(common);
1174                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1175                         ath9k_btcoex_timer_resume(sc);
1176         }
1177
1178         if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
1179                 common->bus_ops->extn_synch_en(common);
1180
1181 mutex_unlock:
1182         mutex_unlock(&sc->mutex);
1183
1184         ath9k_ps_restore(sc);
1185
1186         return r;
1187 }
1188
1189 static int ath9k_tx(struct ieee80211_hw *hw,
1190                     struct sk_buff *skb)
1191 {
1192         struct ath_wiphy *aphy = hw->priv;
1193         struct ath_softc *sc = aphy->sc;
1194         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1195         struct ath_tx_control txctl;
1196         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1197
1198         if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
1199                 ath_dbg(common, ATH_DBG_XMIT,
1200                         "ath9k: %s: TX in unexpected wiphy state %d\n",
1201                         wiphy_name(hw->wiphy), aphy->state);
1202                 goto exit;
1203         }
1204
1205         if (sc->ps_enabled) {
1206                 /*
1207                  * mac80211 does not set PM field for normal data frames, so we
1208                  * need to update that based on the current PS mode.
1209                  */
1210                 if (ieee80211_is_data(hdr->frame_control) &&
1211                     !ieee80211_is_nullfunc(hdr->frame_control) &&
1212                     !ieee80211_has_pm(hdr->frame_control)) {
1213                         ath_dbg(common, ATH_DBG_PS,
1214                                 "Add PM=1 for a TX frame while in PS mode\n");
1215                         hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1216                 }
1217         }
1218
1219         if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
1220                 /*
1221                  * We are using PS-Poll and mac80211 can request TX while in
1222                  * power save mode. Need to wake up hardware for the TX to be
1223                  * completed and if needed, also for RX of buffered frames.
1224                  */
1225                 ath9k_ps_wakeup(sc);
1226                 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
1227                         ath9k_hw_setrxabort(sc->sc_ah, 0);
1228                 if (ieee80211_is_pspoll(hdr->frame_control)) {
1229                         ath_dbg(common, ATH_DBG_PS,
1230                                 "Sending PS-Poll to pick a buffered frame\n");
1231                         sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
1232                 } else {
1233                         ath_dbg(common, ATH_DBG_PS,
1234                                 "Wake up to complete TX\n");
1235                         sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
1236                 }
1237                 /*
1238                  * The actual restore operation will happen only after
1239                  * the sc_flags bit is cleared. We are just dropping
1240                  * the ps_usecount here.
1241                  */
1242                 ath9k_ps_restore(sc);
1243         }
1244
1245         memset(&txctl, 0, sizeof(struct ath_tx_control));
1246         txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
1247
1248         ath_dbg(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
1249
1250         if (ath_tx_start(hw, skb, &txctl) != 0) {
1251                 ath_dbg(common, ATH_DBG_XMIT, "TX failed\n");
1252                 goto exit;
1253         }
1254
1255         return 0;
1256 exit:
1257         dev_kfree_skb_any(skb);
1258         return 0;
1259 }
1260
1261 static void ath9k_stop(struct ieee80211_hw *hw)
1262 {
1263         struct ath_wiphy *aphy = hw->priv;
1264         struct ath_softc *sc = aphy->sc;
1265         struct ath_hw *ah = sc->sc_ah;
1266         struct ath_common *common = ath9k_hw_common(ah);
1267         int i;
1268
1269         mutex_lock(&sc->mutex);
1270
1271         aphy->state = ATH_WIPHY_INACTIVE;
1272
1273         if (led_blink)
1274                 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1275
1276         cancel_delayed_work_sync(&sc->tx_complete_work);
1277         cancel_work_sync(&sc->paprd_work);
1278         cancel_work_sync(&sc->hw_check_work);
1279
1280         for (i = 0; i < sc->num_sec_wiphy; i++) {
1281                 if (sc->sec_wiphy[i])
1282                         break;
1283         }
1284
1285         if (i == sc->num_sec_wiphy) {
1286                 cancel_delayed_work_sync(&sc->wiphy_work);
1287                 cancel_work_sync(&sc->chan_work);
1288         }
1289
1290         if (sc->sc_flags & SC_OP_INVALID) {
1291                 ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
1292                 mutex_unlock(&sc->mutex);
1293                 return;
1294         }
1295
1296         if (ath9k_wiphy_started(sc)) {
1297                 mutex_unlock(&sc->mutex);
1298                 return; /* another wiphy still in use */
1299         }
1300
1301         /* Ensure HW is awake when we try to shut it down. */
1302         ath9k_ps_wakeup(sc);
1303
1304         if (ah->btcoex_hw.enabled) {
1305                 ath9k_hw_btcoex_disable(ah);
1306                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1307                         ath9k_btcoex_timer_pause(sc);
1308         }
1309
1310         spin_lock_bh(&sc->sc_pcu_lock);
1311
1312         /* prevent tasklets to enable interrupts once we disable them */
1313         ah->imask &= ~ATH9K_INT_GLOBAL;
1314
1315         /* make sure h/w will not generate any interrupt
1316          * before setting the invalid flag. */
1317         ath9k_hw_disable_interrupts(ah);
1318
1319         if (!(sc->sc_flags & SC_OP_INVALID)) {
1320                 ath_drain_all_txq(sc, false);
1321                 ath_stoprecv(sc);
1322                 ath9k_hw_phy_disable(ah);
1323         } else
1324                 sc->rx.rxlink = NULL;
1325
1326         /* disable HAL and put h/w to sleep */
1327         ath9k_hw_disable(ah);
1328         ath9k_hw_configpcipowersave(ah, 1, 1);
1329
1330         spin_unlock_bh(&sc->sc_pcu_lock);
1331
1332         /* we can now sync irq and kill any running tasklets, since we already
1333          * disabled interrupts and not holding a spin lock */
1334         synchronize_irq(sc->irq);
1335         tasklet_kill(&sc->intr_tq);
1336         tasklet_kill(&sc->bcon_tasklet);
1337
1338         ath9k_ps_restore(sc);
1339
1340         sc->ps_idle = true;
1341         ath9k_set_wiphy_idle(aphy, true);
1342         ath_radio_disable(sc, hw);
1343
1344         sc->sc_flags |= SC_OP_INVALID;
1345
1346         mutex_unlock(&sc->mutex);
1347
1348         ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
1349 }
1350
1351 static int ath9k_add_interface(struct ieee80211_hw *hw,
1352                                struct ieee80211_vif *vif)
1353 {
1354         struct ath_wiphy *aphy = hw->priv;
1355         struct ath_softc *sc = aphy->sc;
1356         struct ath_hw *ah = sc->sc_ah;
1357         struct ath_common *common = ath9k_hw_common(ah);
1358         struct ath_vif *avp = (void *)vif->drv_priv;
1359         enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
1360         int ret = 0;
1361
1362         mutex_lock(&sc->mutex);
1363
1364         switch (vif->type) {
1365         case NL80211_IFTYPE_STATION:
1366                 ic_opmode = NL80211_IFTYPE_STATION;
1367                 break;
1368         case NL80211_IFTYPE_WDS:
1369                 ic_opmode = NL80211_IFTYPE_WDS;
1370                 break;
1371         case NL80211_IFTYPE_ADHOC:
1372         case NL80211_IFTYPE_AP:
1373         case NL80211_IFTYPE_MESH_POINT:
1374                 if (sc->nbcnvifs >= ATH_BCBUF) {
1375                         ret = -ENOBUFS;
1376                         goto out;
1377                 }
1378                 ic_opmode = vif->type;
1379                 break;
1380         default:
1381                 ath_err(common, "Interface type %d not yet supported\n",
1382                         vif->type);
1383                 ret = -EOPNOTSUPP;
1384                 goto out;
1385         }
1386
1387         ath_dbg(common, ATH_DBG_CONFIG,
1388                 "Attach a VIF of type: %d\n", ic_opmode);
1389
1390         /* Set the VIF opmode */
1391         avp->av_opmode = ic_opmode;
1392         avp->av_bslot = -1;
1393
1394         sc->nvifs++;
1395
1396         ath9k_set_bssid_mask(hw, vif);
1397
1398         if (sc->nvifs > 1)
1399                 goto out; /* skip global settings for secondary vif */
1400
1401         if (ic_opmode == NL80211_IFTYPE_AP) {
1402                 ath9k_hw_set_tsfadjust(ah, 1);
1403                 sc->sc_flags |= SC_OP_TSF_RESET;
1404         }
1405
1406         /* Set the device opmode */
1407         ah->opmode = ic_opmode;
1408
1409         /*
1410          * Enable MIB interrupts when there are hardware phy counters.
1411          * Note we only do this (at the moment) for station mode.
1412          */
1413         if ((vif->type == NL80211_IFTYPE_STATION) ||
1414             (vif->type == NL80211_IFTYPE_ADHOC) ||
1415             (vif->type == NL80211_IFTYPE_MESH_POINT)) {
1416                 if (ah->config.enable_ani)
1417                         ah->imask |= ATH9K_INT_MIB;
1418                 ah->imask |= ATH9K_INT_TSFOOR;
1419         }
1420
1421         ath9k_hw_set_interrupts(ah, ah->imask);
1422
1423         if (vif->type == NL80211_IFTYPE_AP    ||
1424             vif->type == NL80211_IFTYPE_ADHOC) {
1425                 sc->sc_flags |= SC_OP_ANI_RUN;
1426                 ath_start_ani(common);
1427         }
1428
1429 out:
1430         mutex_unlock(&sc->mutex);
1431         return ret;
1432 }
1433
1434 static void ath9k_reclaim_beacon(struct ath_softc *sc,
1435                                  struct ieee80211_vif *vif)
1436 {
1437         struct ath_vif *avp = (void *)vif->drv_priv;
1438
1439         /* Disable SWBA interrupt */
1440         sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
1441         ath9k_ps_wakeup(sc);
1442         ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
1443         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1444         tasklet_kill(&sc->bcon_tasklet);
1445         ath9k_ps_restore(sc);
1446
1447         ath_beacon_return(sc, avp);
1448         sc->sc_flags &= ~SC_OP_BEACONS;
1449
1450         if (sc->nbcnvifs > 0) {
1451                 /* Re-enable beaconing */
1452                 sc->sc_ah->imask |= ATH9K_INT_SWBA;
1453                 ath9k_ps_wakeup(sc);
1454                 ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
1455                 ath9k_ps_restore(sc);
1456         }
1457 }
1458
1459 static int ath9k_change_interface(struct ieee80211_hw *hw,
1460                                   struct ieee80211_vif *vif,
1461                                   enum nl80211_iftype new_type,
1462                                   bool p2p)
1463 {
1464         struct ath_wiphy *aphy = hw->priv;
1465         struct ath_softc *sc = aphy->sc;
1466         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1467         int ret = 0;
1468
1469         ath_dbg(common, ATH_DBG_CONFIG, "Change Interface\n");
1470         mutex_lock(&sc->mutex);
1471
1472         switch (new_type) {
1473         case NL80211_IFTYPE_AP:
1474         case NL80211_IFTYPE_ADHOC:
1475                 if (sc->nbcnvifs >= ATH_BCBUF) {
1476                         ath_err(common, "No beacon slot available\n");
1477                         ret = -ENOBUFS;
1478                         goto out;
1479                 }
1480                 break;
1481         case NL80211_IFTYPE_STATION:
1482                 /* Stop ANI */
1483                 sc->sc_flags &= ~SC_OP_ANI_RUN;
1484                 del_timer_sync(&common->ani.timer);
1485                 if ((vif->type == NL80211_IFTYPE_AP) ||
1486                     (vif->type == NL80211_IFTYPE_ADHOC))
1487                         ath9k_reclaim_beacon(sc, vif);
1488                 break;
1489         default:
1490                 ath_err(common, "Interface type %d not yet supported\n",
1491                                 vif->type);
1492                 ret = -ENOTSUPP;
1493                 goto out;
1494         }
1495         vif->type = new_type;
1496         vif->p2p = p2p;
1497
1498 out:
1499         mutex_unlock(&sc->mutex);
1500         return ret;
1501 }
1502
1503 static void ath9k_remove_interface(struct ieee80211_hw *hw,
1504                                    struct ieee80211_vif *vif)
1505 {
1506         struct ath_wiphy *aphy = hw->priv;
1507         struct ath_softc *sc = aphy->sc;
1508         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1509
1510         ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
1511
1512         mutex_lock(&sc->mutex);
1513
1514         /* Stop ANI */
1515         sc->sc_flags &= ~SC_OP_ANI_RUN;
1516         del_timer_sync(&common->ani.timer);
1517
1518         /* Reclaim beacon resources */
1519         if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
1520             (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
1521             (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT))
1522                 ath9k_reclaim_beacon(sc, vif);
1523
1524         sc->nvifs--;
1525
1526         mutex_unlock(&sc->mutex);
1527 }
1528
1529 static void ath9k_enable_ps(struct ath_softc *sc)
1530 {
1531         struct ath_hw *ah = sc->sc_ah;
1532
1533         sc->ps_enabled = true;
1534         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1535                 if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
1536                         ah->imask |= ATH9K_INT_TIM_TIMER;
1537                         ath9k_hw_set_interrupts(ah, ah->imask);
1538                 }
1539                 ath9k_hw_setrxabort(ah, 1);
1540         }
1541 }
1542
1543 static void ath9k_disable_ps(struct ath_softc *sc)
1544 {
1545         struct ath_hw *ah = sc->sc_ah;
1546
1547         sc->ps_enabled = false;
1548         ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
1549         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1550                 ath9k_hw_setrxabort(ah, 0);
1551                 sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
1552                                   PS_WAIT_FOR_CAB |
1553                                   PS_WAIT_FOR_PSPOLL_DATA |
1554                                   PS_WAIT_FOR_TX_ACK);
1555                 if (ah->imask & ATH9K_INT_TIM_TIMER) {
1556                         ah->imask &= ~ATH9K_INT_TIM_TIMER;
1557                         ath9k_hw_set_interrupts(ah, ah->imask);
1558                 }
1559         }
1560
1561 }
1562
1563 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
1564 {
1565         struct ath_wiphy *aphy = hw->priv;
1566         struct ath_softc *sc = aphy->sc;
1567         struct ath_hw *ah = sc->sc_ah;
1568         struct ath_common *common = ath9k_hw_common(ah);
1569         struct ieee80211_conf *conf = &hw->conf;
1570         bool disable_radio;
1571
1572         mutex_lock(&sc->mutex);
1573
1574         /*
1575          * Leave this as the first check because we need to turn on the
1576          * radio if it was disabled before prior to processing the rest
1577          * of the changes. Likewise we must only disable the radio towards
1578          * the end.
1579          */
1580         if (changed & IEEE80211_CONF_CHANGE_IDLE) {
1581                 bool enable_radio;
1582                 bool all_wiphys_idle;
1583                 bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
1584
1585                 spin_lock_bh(&sc->wiphy_lock);
1586                 all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
1587                 ath9k_set_wiphy_idle(aphy, idle);
1588
1589                 enable_radio = (!idle && all_wiphys_idle);
1590
1591                 /*
1592                  * After we unlock here its possible another wiphy
1593                  * can be re-renabled so to account for that we will
1594                  * only disable the radio toward the end of this routine
1595                  * if by then all wiphys are still idle.
1596                  */
1597                 spin_unlock_bh(&sc->wiphy_lock);
1598
1599                 if (enable_radio) {
1600                         sc->ps_idle = false;
1601                         ath_radio_enable(sc, hw);
1602                         ath_dbg(common, ATH_DBG_CONFIG,
1603                                 "not-idle: enabling radio\n");
1604                 }
1605         }
1606
1607         /*
1608          * We just prepare to enable PS. We have to wait until our AP has
1609          * ACK'd our null data frame to disable RX otherwise we'll ignore
1610          * those ACKs and end up retransmitting the same null data frames.
1611          * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
1612          */
1613         if (changed & IEEE80211_CONF_CHANGE_PS) {
1614                 unsigned long flags;
1615                 spin_lock_irqsave(&sc->sc_pm_lock, flags);
1616                 if (conf->flags & IEEE80211_CONF_PS)
1617                         ath9k_enable_ps(sc);
1618                 else
1619                         ath9k_disable_ps(sc);
1620                 spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
1621         }
1622
1623         if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
1624                 if (conf->flags & IEEE80211_CONF_MONITOR) {
1625                         ath_dbg(common, ATH_DBG_CONFIG,
1626                                 "Monitor mode is enabled\n");
1627                         sc->sc_ah->is_monitoring = true;
1628                 } else {
1629                         ath_dbg(common, ATH_DBG_CONFIG,
1630                                 "Monitor mode is disabled\n");
1631                         sc->sc_ah->is_monitoring = false;
1632                 }
1633         }
1634
1635         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
1636                 struct ieee80211_channel *curchan = hw->conf.channel;
1637                 int pos = curchan->hw_value;
1638                 int old_pos = -1;
1639                 unsigned long flags;
1640
1641                 if (ah->curchan)
1642                         old_pos = ah->curchan - &ah->channels[0];
1643
1644                 aphy->chan_idx = pos;
1645                 aphy->chan_is_ht = conf_is_ht(conf);
1646                 if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
1647                         sc->sc_flags |= SC_OP_OFFCHANNEL;
1648                 else
1649                         sc->sc_flags &= ~SC_OP_OFFCHANNEL;
1650
1651                 if (aphy->state == ATH_WIPHY_SCAN ||
1652                     aphy->state == ATH_WIPHY_ACTIVE)
1653                         ath9k_wiphy_pause_all_forced(sc, aphy);
1654                 else {
1655                         /*
1656                          * Do not change operational channel based on a paused
1657                          * wiphy changes.
1658                          */
1659                         goto skip_chan_change;
1660                 }
1661
1662                 ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
1663                         curchan->center_freq);
1664
1665                 /* XXX: remove me eventualy */
1666                 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
1667
1668                 /* update survey stats for the old channel before switching */
1669                 spin_lock_irqsave(&common->cc_lock, flags);
1670                 ath_update_survey_stats(sc);
1671                 spin_unlock_irqrestore(&common->cc_lock, flags);
1672
1673                 /*
1674                  * If the operating channel changes, change the survey in-use flags
1675                  * along with it.
1676                  * Reset the survey data for the new channel, unless we're switching
1677                  * back to the operating channel from an off-channel operation.
1678                  */
1679                 if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) &&
1680                     sc->cur_survey != &sc->survey[pos]) {
1681
1682                         if (sc->cur_survey)
1683                                 sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE;
1684
1685                         sc->cur_survey = &sc->survey[pos];
1686
1687                         memset(sc->cur_survey, 0, sizeof(struct survey_info));
1688                         sc->cur_survey->filled |= SURVEY_INFO_IN_USE;
1689                 } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) {
1690                         memset(&sc->survey[pos], 0, sizeof(struct survey_info));
1691                 }
1692
1693                 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
1694                         ath_err(common, "Unable to set channel\n");
1695                         mutex_unlock(&sc->mutex);
1696                         return -EINVAL;
1697                 }
1698
1699                 /*
1700                  * The most recent snapshot of channel->noisefloor for the old
1701                  * channel is only available after the hardware reset. Copy it to
1702                  * the survey stats now.
1703                  */
1704                 if (old_pos >= 0)
1705                         ath_update_survey_nf(sc, old_pos);
1706         }
1707
1708 skip_chan_change:
1709         if (changed & IEEE80211_CONF_CHANGE_POWER) {
1710                 sc->config.txpowlimit = 2 * conf->power_level;
1711                 ath9k_ps_wakeup(sc);
1712                 ath_update_txpow(sc);
1713                 ath9k_ps_restore(sc);
1714         }
1715
1716         spin_lock_bh(&sc->wiphy_lock);
1717         disable_radio = ath9k_all_wiphys_idle(sc);
1718         spin_unlock_bh(&sc->wiphy_lock);
1719
1720         if (disable_radio) {
1721                 ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
1722                 sc->ps_idle = true;
1723                 ath_radio_disable(sc, hw);
1724         }
1725
1726         mutex_unlock(&sc->mutex);
1727
1728         return 0;
1729 }
1730
1731 #define SUPPORTED_FILTERS                       \
1732         (FIF_PROMISC_IN_BSS |                   \
1733         FIF_ALLMULTI |                          \
1734         FIF_CONTROL |                           \
1735         FIF_PSPOLL |                            \
1736         FIF_OTHER_BSS |                         \
1737         FIF_BCN_PRBRESP_PROMISC |               \
1738         FIF_PROBE_REQ |                         \
1739         FIF_FCSFAIL)
1740
1741 /* FIXME: sc->sc_full_reset ? */
1742 static void ath9k_configure_filter(struct ieee80211_hw *hw,
1743                                    unsigned int changed_flags,
1744                                    unsigned int *total_flags,
1745                                    u64 multicast)
1746 {
1747         struct ath_wiphy *aphy = hw->priv;
1748         struct ath_softc *sc = aphy->sc;
1749         u32 rfilt;
1750
1751         changed_flags &= SUPPORTED_FILTERS;
1752         *total_flags &= SUPPORTED_FILTERS;
1753
1754         sc->rx.rxfilter = *total_flags;
1755         ath9k_ps_wakeup(sc);
1756         rfilt = ath_calcrxfilter(sc);
1757         ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
1758         ath9k_ps_restore(sc);
1759
1760         ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
1761                 "Set HW RX filter: 0x%x\n", rfilt);
1762 }
1763
1764 static int ath9k_sta_add(struct ieee80211_hw *hw,
1765                          struct ieee80211_vif *vif,
1766                          struct ieee80211_sta *sta)
1767 {
1768         struct ath_wiphy *aphy = hw->priv;
1769         struct ath_softc *sc = aphy->sc;
1770
1771         ath_node_attach(sc, sta);
1772
1773         return 0;
1774 }
1775
1776 static int ath9k_sta_remove(struct ieee80211_hw *hw,
1777                             struct ieee80211_vif *vif,
1778                             struct ieee80211_sta *sta)
1779 {
1780         struct ath_wiphy *aphy = hw->priv;
1781         struct ath_softc *sc = aphy->sc;
1782
1783         ath_node_detach(sc, sta);
1784
1785         return 0;
1786 }
1787
1788 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
1789                          const struct ieee80211_tx_queue_params *params)
1790 {
1791         struct ath_wiphy *aphy = hw->priv;
1792         struct ath_softc *sc = aphy->sc;
1793         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1794         struct ath_txq *txq;
1795         struct ath9k_tx_queue_info qi;
1796         int ret = 0;
1797
1798         if (queue >= WME_NUM_AC)
1799                 return 0;
1800
1801         txq = sc->tx.txq_map[queue];
1802
1803         mutex_lock(&sc->mutex);
1804
1805         memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
1806
1807         qi.tqi_aifs = params->aifs;
1808         qi.tqi_cwmin = params->cw_min;
1809         qi.tqi_cwmax = params->cw_max;
1810         qi.tqi_burstTime = params->txop;
1811
1812         ath_dbg(common, ATH_DBG_CONFIG,
1813                 "Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
1814                 queue, txq->axq_qnum, params->aifs, params->cw_min,
1815                 params->cw_max, params->txop);
1816
1817         ret = ath_txq_update(sc, txq->axq_qnum, &qi);
1818         if (ret)
1819                 ath_err(common, "TXQ Update failed\n");
1820
1821         if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
1822                 if (queue == WME_AC_BE && !ret)
1823                         ath_beaconq_config(sc);
1824
1825         mutex_unlock(&sc->mutex);
1826
1827         return ret;
1828 }
1829
1830 static int ath9k_set_key(struct ieee80211_hw *hw,
1831                          enum set_key_cmd cmd,
1832                          struct ieee80211_vif *vif,
1833                          struct ieee80211_sta *sta,
1834                          struct ieee80211_key_conf *key)
1835 {
1836         struct ath_wiphy *aphy = hw->priv;
1837         struct ath_softc *sc = aphy->sc;
1838         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1839         int ret = 0;
1840
1841         if (ath9k_modparam_nohwcrypt)
1842                 return -ENOSPC;
1843
1844         mutex_lock(&sc->mutex);
1845         ath9k_ps_wakeup(sc);
1846         ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
1847
1848         switch (cmd) {
1849         case SET_KEY:
1850                 ret = ath_key_config(common, vif, sta, key);
1851                 if (ret >= 0) {
1852                         key->hw_key_idx = ret;
1853                         /* push IV and Michael MIC generation to stack */
1854                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
1855                         if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
1856                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
1857                         if (sc->sc_ah->sw_mgmt_crypto &&
1858                             key->cipher == WLAN_CIPHER_SUITE_CCMP)
1859                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
1860                         ret = 0;
1861                 }
1862                 break;
1863         case DISABLE_KEY:
1864                 ath_key_delete(common, key);
1865                 break;
1866         default:
1867                 ret = -EINVAL;
1868         }
1869
1870         ath9k_ps_restore(sc);
1871         mutex_unlock(&sc->mutex);
1872
1873         return ret;
1874 }
1875
1876 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
1877                                    struct ieee80211_vif *vif,
1878                                    struct ieee80211_bss_conf *bss_conf,
1879                                    u32 changed)
1880 {
1881         struct ath_wiphy *aphy = hw->priv;
1882         struct ath_softc *sc = aphy->sc;
1883         struct ath_hw *ah = sc->sc_ah;
1884         struct ath_common *common = ath9k_hw_common(ah);
1885         struct ath_vif *avp = (void *)vif->drv_priv;
1886         int slottime;
1887         int error;
1888
1889         mutex_lock(&sc->mutex);
1890
1891         if (changed & BSS_CHANGED_BSSID) {
1892                 /* Set BSSID */
1893                 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
1894                 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
1895                 common->curaid = 0;
1896                 ath9k_hw_write_associd(ah);
1897
1898                 /* Set aggregation protection mode parameters */
1899                 sc->config.ath_aggr_prot = 0;
1900
1901                 ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
1902                         common->curbssid, common->curaid);
1903
1904                 /* need to reconfigure the beacon */
1905                 sc->sc_flags &= ~SC_OP_BEACONS ;
1906         }
1907
1908         /* Enable transmission of beacons (AP, IBSS, MESH) */
1909         if ((changed & BSS_CHANGED_BEACON) ||
1910             ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
1911                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1912                 error = ath_beacon_alloc(aphy, vif);
1913                 if (!error)
1914                         ath_beacon_config(sc, vif);
1915         }
1916
1917         if (changed & BSS_CHANGED_ERP_SLOT) {
1918                 if (bss_conf->use_short_slot)
1919                         slottime = 9;
1920                 else
1921                         slottime = 20;
1922                 if (vif->type == NL80211_IFTYPE_AP) {
1923                         /*
1924                          * Defer update, so that connected stations can adjust
1925                          * their settings at the same time.
1926                          * See beacon.c for more details
1927                          */
1928                         sc->beacon.slottime = slottime;
1929                         sc->beacon.updateslot = UPDATE;
1930                 } else {
1931                         ah->slottime = slottime;
1932                         ath9k_hw_init_global_settings(ah);
1933                 }
1934         }
1935
1936         /* Disable transmission of beacons */
1937         if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
1938                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1939
1940         if (changed & BSS_CHANGED_BEACON_INT) {
1941                 sc->beacon_interval = bss_conf->beacon_int;
1942                 /*
1943                  * In case of AP mode, the HW TSF has to be reset
1944                  * when the beacon interval changes.
1945                  */
1946                 if (vif->type == NL80211_IFTYPE_AP) {
1947                         sc->sc_flags |= SC_OP_TSF_RESET;
1948                         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1949                         error = ath_beacon_alloc(aphy, vif);
1950                         if (!error)
1951                                 ath_beacon_config(sc, vif);
1952                 } else {
1953                         ath_beacon_config(sc, vif);
1954                 }
1955         }
1956
1957         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1958                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
1959                         bss_conf->use_short_preamble);
1960                 if (bss_conf->use_short_preamble)
1961                         sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
1962                 else
1963                         sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
1964         }
1965
1966         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1967                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
1968                         bss_conf->use_cts_prot);
1969                 if (bss_conf->use_cts_prot &&
1970                     hw->conf.channel->band != IEEE80211_BAND_5GHZ)
1971                         sc->sc_flags |= SC_OP_PROTECT_ENABLE;
1972                 else
1973                         sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
1974         }
1975
1976         if (changed & BSS_CHANGED_ASSOC) {
1977                 ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
1978                         bss_conf->assoc);
1979                 ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
1980         }
1981
1982         mutex_unlock(&sc->mutex);
1983 }
1984
1985 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
1986 {
1987         u64 tsf;
1988         struct ath_wiphy *aphy = hw->priv;
1989         struct ath_softc *sc = aphy->sc;
1990
1991         mutex_lock(&sc->mutex);
1992         ath9k_ps_wakeup(sc);
1993         tsf = ath9k_hw_gettsf64(sc->sc_ah);
1994         ath9k_ps_restore(sc);
1995         mutex_unlock(&sc->mutex);
1996
1997         return tsf;
1998 }
1999
2000 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
2001 {
2002         struct ath_wiphy *aphy = hw->priv;
2003         struct ath_softc *sc = aphy->sc;
2004
2005         mutex_lock(&sc->mutex);
2006         ath9k_ps_wakeup(sc);
2007         ath9k_hw_settsf64(sc->sc_ah, tsf);
2008         ath9k_ps_restore(sc);
2009         mutex_unlock(&sc->mutex);
2010 }
2011
2012 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
2013 {
2014         struct ath_wiphy *aphy = hw->priv;
2015         struct ath_softc *sc = aphy->sc;
2016
2017         mutex_lock(&sc->mutex);
2018
2019         ath9k_ps_wakeup(sc);
2020         ath9k_hw_reset_tsf(sc->sc_ah);
2021         ath9k_ps_restore(sc);
2022
2023         mutex_unlock(&sc->mutex);
2024 }
2025
2026 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
2027                               struct ieee80211_vif *vif,
2028                               enum ieee80211_ampdu_mlme_action action,
2029                               struct ieee80211_sta *sta,
2030                               u16 tid, u16 *ssn)
2031 {
2032         struct ath_wiphy *aphy = hw->priv;
2033         struct ath_softc *sc = aphy->sc;
2034         int ret = 0;
2035
2036         local_bh_disable();
2037
2038         switch (action) {
2039         case IEEE80211_AMPDU_RX_START:
2040                 if (!(sc->sc_flags & SC_OP_RXAGGR))
2041                         ret = -ENOTSUPP;
2042                 break;
2043         case IEEE80211_AMPDU_RX_STOP:
2044                 break;
2045         case IEEE80211_AMPDU_TX_START:
2046                 if (!(sc->sc_flags & SC_OP_TXAGGR))
2047                         return -EOPNOTSUPP;
2048
2049                 ath9k_ps_wakeup(sc);
2050                 ret = ath_tx_aggr_start(sc, sta, tid, ssn);
2051                 if (!ret)
2052                         ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2053                 ath9k_ps_restore(sc);
2054                 break;
2055         case IEEE80211_AMPDU_TX_STOP:
2056                 ath9k_ps_wakeup(sc);
2057                 ath_tx_aggr_stop(sc, sta, tid);
2058                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
2059                 ath9k_ps_restore(sc);
2060                 break;
2061         case IEEE80211_AMPDU_TX_OPERATIONAL:
2062                 ath9k_ps_wakeup(sc);
2063                 ath_tx_aggr_resume(sc, sta, tid);
2064                 ath9k_ps_restore(sc);
2065                 break;
2066         default:
2067                 ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
2068         }
2069
2070         local_bh_enable();
2071
2072         return ret;
2073 }
2074
2075 static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
2076                              struct survey_info *survey)
2077 {
2078         struct ath_wiphy *aphy = hw->priv;
2079         struct ath_softc *sc = aphy->sc;
2080         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
2081         struct ieee80211_supported_band *sband;
2082         struct ieee80211_channel *chan;
2083         unsigned long flags;
2084         int pos;
2085
2086         spin_lock_irqsave(&common->cc_lock, flags);
2087         if (idx == 0)
2088                 ath_update_survey_stats(sc);
2089
2090         sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ];
2091         if (sband && idx >= sband->n_channels) {
2092                 idx -= sband->n_channels;
2093                 sband = NULL;
2094         }
2095
2096         if (!sband)
2097                 sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ];
2098
2099         if (!sband || idx >= sband->n_channels) {
2100                 spin_unlock_irqrestore(&common->cc_lock, flags);
2101                 return -ENOENT;
2102         }
2103
2104         chan = &sband->channels[idx];
2105         pos = chan->hw_value;
2106         memcpy(survey, &sc->survey[pos], sizeof(*survey));
2107         survey->channel = chan;
2108         spin_unlock_irqrestore(&common->cc_lock, flags);
2109
2110         return 0;
2111 }
2112
2113 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2114 {
2115         struct ath_wiphy *aphy = hw->priv;
2116         struct ath_softc *sc = aphy->sc;
2117
2118         mutex_lock(&sc->mutex);
2119         if (ath9k_wiphy_scanning(sc)) {
2120                 /*
2121                  * There is a race here in mac80211 but fixing it requires
2122                  * we revisit how we handle the scan complete callback.
2123                  * After mac80211 fixes we will not have configured hardware
2124                  * to the home channel nor would we have configured the RX
2125                  * filter yet.
2126                  */
2127                 mutex_unlock(&sc->mutex);
2128                 return;
2129         }
2130
2131         aphy->state = ATH_WIPHY_SCAN;
2132         ath9k_wiphy_pause_all_forced(sc, aphy);
2133         mutex_unlock(&sc->mutex);
2134 }
2135
2136 /*
2137  * XXX: this requires a revisit after the driver
2138  * scan_complete gets moved to another place/removed in mac80211.
2139  */
2140 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2141 {
2142         struct ath_wiphy *aphy = hw->priv;
2143         struct ath_softc *sc = aphy->sc;
2144
2145         mutex_lock(&sc->mutex);
2146         aphy->state = ATH_WIPHY_ACTIVE;
2147         mutex_unlock(&sc->mutex);
2148 }
2149
2150 static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
2151 {
2152         struct ath_wiphy *aphy = hw->priv;
2153         struct ath_softc *sc = aphy->sc;
2154         struct ath_hw *ah = sc->sc_ah;
2155
2156         mutex_lock(&sc->mutex);
2157         ah->coverage_class = coverage_class;
2158         ath9k_hw_init_global_settings(ah);
2159         mutex_unlock(&sc->mutex);
2160 }
2161
2162 struct ieee80211_ops ath9k_ops = {
2163         .tx                 = ath9k_tx,
2164         .start              = ath9k_start,
2165         .stop               = ath9k_stop,
2166         .add_interface      = ath9k_add_interface,
2167         .change_interface   = ath9k_change_interface,
2168         .remove_interface   = ath9k_remove_interface,
2169         .config             = ath9k_config,
2170         .configure_filter   = ath9k_configure_filter,
2171         .sta_add            = ath9k_sta_add,
2172         .sta_remove         = ath9k_sta_remove,
2173         .conf_tx            = ath9k_conf_tx,
2174         .bss_info_changed   = ath9k_bss_info_changed,
2175         .set_key            = ath9k_set_key,
2176         .get_tsf            = ath9k_get_tsf,
2177         .set_tsf            = ath9k_set_tsf,
2178         .reset_tsf          = ath9k_reset_tsf,
2179         .ampdu_action       = ath9k_ampdu_action,
2180         .get_survey         = ath9k_get_survey,
2181         .sw_scan_start      = ath9k_sw_scan_start,
2182         .sw_scan_complete   = ath9k_sw_scan_complete,
2183         .rfkill_poll        = ath9k_rfkill_poll_state,
2184         .set_coverage_class = ath9k_set_coverage_class,
2185 };