2 * ethtool.h: Defines for Linux ethtool.
4 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
5 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
6 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
7 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
8 * christopher.leech@intel.com,
9 * scott.feldman@intel.com)
10 * Portions Copyright (C) Sun Microsystems 2008
13 #ifndef _LINUX_ETHTOOL_H
14 #define _LINUX_ETHTOOL_H
17 #include <linux/compat.h>
19 #include <linux/types.h>
20 #include <linux/if_ether.h>
22 /* This should work for both 32 and 64 bit userland. */
25 __u32 supported; /* Features this interface supports */
26 __u32 advertising; /* Features this interface advertises */
27 __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
28 __u8 duplex; /* Duplex, half or full */
29 __u8 port; /* Which connector port */
31 __u8 transceiver; /* Which transceiver to use */
32 __u8 autoneg; /* Enable or disable autonegotiation */
34 __u32 maxtxpkt; /* Tx pkts before generating tx int */
35 __u32 maxrxpkt; /* Rx pkts before generating rx int */
39 __u32 lp_advertising; /* Features the link partner advertises */
43 static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
47 ep->speed = (__u16)speed;
48 ep->speed_hi = (__u16)(speed >> 16);
51 static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
53 return (ep->speed_hi << 16) | ep->speed;
56 #define ETHTOOL_FWVERS_LEN 32
57 #define ETHTOOL_BUSINFO_LEN 32
58 /* these strings are set to whatever the driver author decides... */
59 struct ethtool_drvinfo {
61 char driver[32]; /* driver short name, "tulip", "eepro100" */
62 char version[32]; /* driver version string */
63 char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
64 char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
65 /* For PCI devices, use pci_name(pci_dev). */
69 * Some struct members below are filled in
70 * using ops->get_sset_count(). Obtaining
71 * this info from ethtool_drvinfo is now
72 * deprecated; Use ETHTOOL_GSSET_INFO
75 __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
76 __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
78 __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
79 __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
83 /* wake-on-lan settings */
84 struct ethtool_wolinfo {
88 __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
91 /* for passing single values */
92 struct ethtool_value {
97 /* for passing big chunks of data */
100 __u32 version; /* driver-specific, indicates different chips/revs */
101 __u32 len; /* bytes */
105 /* for passing EEPROM chunks */
106 struct ethtool_eeprom {
109 __u32 offset; /* in bytes */
110 __u32 len; /* in bytes */
114 /* for configuring coalescing parameters of chip */
115 struct ethtool_coalesce {
116 __u32 cmd; /* ETHTOOL_{G,S}COALESCE */
118 /* How many usecs to delay an RX interrupt after
119 * a packet arrives. If 0, only rx_max_coalesced_frames
122 __u32 rx_coalesce_usecs;
124 /* How many packets to delay an RX interrupt after
125 * a packet arrives. If 0, only rx_coalesce_usecs is
126 * used. It is illegal to set both usecs and max frames
127 * to zero as this would cause RX interrupts to never be
130 __u32 rx_max_coalesced_frames;
132 /* Same as above two parameters, except that these values
133 * apply while an IRQ is being serviced by the host. Not
134 * all cards support this feature and the values are ignored
137 __u32 rx_coalesce_usecs_irq;
138 __u32 rx_max_coalesced_frames_irq;
140 /* How many usecs to delay a TX interrupt after
141 * a packet is sent. If 0, only tx_max_coalesced_frames
144 __u32 tx_coalesce_usecs;
146 /* How many packets to delay a TX interrupt after
147 * a packet is sent. If 0, only tx_coalesce_usecs is
148 * used. It is illegal to set both usecs and max frames
149 * to zero as this would cause TX interrupts to never be
152 __u32 tx_max_coalesced_frames;
154 /* Same as above two parameters, except that these values
155 * apply while an IRQ is being serviced by the host. Not
156 * all cards support this feature and the values are ignored
159 __u32 tx_coalesce_usecs_irq;
160 __u32 tx_max_coalesced_frames_irq;
162 /* How many usecs to delay in-memory statistics
163 * block updates. Some drivers do not have an in-memory
164 * statistic block, and in such cases this value is ignored.
165 * This value must not be zero.
167 __u32 stats_block_coalesce_usecs;
169 /* Adaptive RX/TX coalescing is an algorithm implemented by
170 * some drivers to improve latency under low packet rates and
171 * improve throughput under high packet rates. Some drivers
172 * only implement one of RX or TX adaptive coalescing. Anything
173 * not implemented by the driver causes these values to be
176 __u32 use_adaptive_rx_coalesce;
177 __u32 use_adaptive_tx_coalesce;
179 /* When the packet rate (measured in packets per second)
180 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
184 __u32 rx_coalesce_usecs_low;
185 __u32 rx_max_coalesced_frames_low;
186 __u32 tx_coalesce_usecs_low;
187 __u32 tx_max_coalesced_frames_low;
189 /* When the packet rate is below pkt_rate_high but above
190 * pkt_rate_low (both measured in packets per second) the
191 * normal {rx,tx}_* coalescing parameters are used.
194 /* When the packet rate is (measured in packets per second)
195 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
199 __u32 rx_coalesce_usecs_high;
200 __u32 rx_max_coalesced_frames_high;
201 __u32 tx_coalesce_usecs_high;
202 __u32 tx_max_coalesced_frames_high;
204 /* How often to do adaptive coalescing packet rate sampling,
205 * measured in seconds. Must not be zero.
207 __u32 rate_sample_interval;
210 /* for configuring RX/TX ring parameters */
211 struct ethtool_ringparam {
212 __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
214 /* Read only attributes. These indicate the maximum number
215 * of pending RX/TX ring entries the driver will allow the
218 __u32 rx_max_pending;
219 __u32 rx_mini_max_pending;
220 __u32 rx_jumbo_max_pending;
221 __u32 tx_max_pending;
223 /* Values changeable by the user. The valid values are
224 * in the range 1 to the "*_max_pending" counterpart above.
227 __u32 rx_mini_pending;
228 __u32 rx_jumbo_pending;
232 /* for configuring link flow control parameters */
233 struct ethtool_pauseparam {
234 __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
236 /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
237 * being true) the user may set 'autonet' here non-zero to have the
238 * pause parameters be auto-negotiated too. In such a case, the
239 * {rx,tx}_pause values below determine what capabilities are
242 * If 'autoneg' is zero or the link is not being auto-negotiated,
243 * then {rx,tx}_pause force the driver to use/not-use pause
251 #define ETH_GSTRING_LEN 32
252 enum ethtool_stringset {
256 ETH_SS_NTUPLE_FILTERS,
259 /* for passing string sets for data tagging */
260 struct ethtool_gstrings {
261 __u32 cmd; /* ETHTOOL_GSTRINGS */
262 __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
263 __u32 len; /* number of strings in the string set */
267 struct ethtool_sset_info {
268 __u32 cmd; /* ETHTOOL_GSSET_INFO */
270 __u64 sset_mask; /* input: each bit selects an sset to query */
271 /* output: each bit a returned sset */
272 __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
273 in sset_mask. One bit implies one
274 __u32, two bits implies two
278 enum ethtool_test_flags {
279 ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
280 ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
283 /* for requesting NIC test and getting results*/
284 struct ethtool_test {
285 __u32 cmd; /* ETHTOOL_TEST */
286 __u32 flags; /* ETH_TEST_FL_xxx */
288 __u32 len; /* result length, in number of u64 elements */
292 /* for dumping NIC-specific statistics */
293 struct ethtool_stats {
294 __u32 cmd; /* ETHTOOL_GSTATS */
295 __u32 n_stats; /* number of u64's being returned */
299 struct ethtool_perm_addr {
300 __u32 cmd; /* ETHTOOL_GPERMADDR */
305 /* boolean flags controlling per-interface behavior characteristics.
306 * When reading, the flag indicates whether or not a certain behavior
307 * is enabled/present. When writing, the flag indicates whether
308 * or not the driver should turn on (set) or off (clear) a behavior.
310 * Some behaviors may read-only (unconditionally absent or present).
311 * If such is the case, return EINVAL in the set-flags operation if the
312 * flag differs from the read-only value.
315 ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
316 ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
317 ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
318 ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
319 ETH_FLAG_RXHASH = (1 << 28),
322 /* The following structures are for supporting RX network flow
323 * classification and RX n-tuple configuration. Note, all multibyte
324 * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
325 * be in network byte order.
329 * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
330 * @ip4src: Source host
331 * @ip4dst: Destination host
333 * @pdst: Destination port
334 * @tos: Type-of-service
336 * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
338 struct ethtool_tcpip4_spec {
347 * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
348 * @ip4src: Source host
349 * @ip4dst: Destination host
350 * @spi: Security parameters index
351 * @tos: Type-of-service
353 * This can be used to specify an IPsec transport or tunnel over IPv4.
355 struct ethtool_ah_espip4_spec {
362 #define ETH_RX_NFC_IP4 1
365 * struct ethtool_usrip4_spec - general flow specification for IPv4
366 * @ip4src: Source host
367 * @ip4dst: Destination host
368 * @l4_4_bytes: First 4 bytes of transport (layer 4) header
369 * @tos: Type-of-service
370 * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
371 * @proto: Transport protocol number; mask must be 0
373 struct ethtool_usrip4_spec {
383 * struct ethtool_rx_flow_spec - specification for RX flow filter
384 * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
385 * @h_u: Flow fields to match (dependent on @flow_type)
386 * @m_u: Masks for flow field bits to be ignored
387 * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
388 * if packets should be discarded
389 * @location: Index of filter in hardware table
391 struct ethtool_rx_flow_spec {
394 struct ethtool_tcpip4_spec tcp_ip4_spec;
395 struct ethtool_tcpip4_spec udp_ip4_spec;
396 struct ethtool_tcpip4_spec sctp_ip4_spec;
397 struct ethtool_ah_espip4_spec ah_ip4_spec;
398 struct ethtool_ah_espip4_spec esp_ip4_spec;
399 struct ethtool_usrip4_spec usr_ip4_spec;
400 struct ethhdr ether_spec;
408 * struct ethtool_rxnfc - command to get or set RX flow classification rules
409 * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
410 * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
411 * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
412 * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
413 * @data: Command-dependent value
414 * @fs: Flow filter specification
415 * @rule_cnt: Number of rules to be affected
416 * @rule_locs: Array of valid rule indices
418 * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
419 * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
420 * structure fields must not be used.
422 * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
425 * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
428 * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the index of an
429 * existing filter rule on entry and @fs contains the rule on return.
431 * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
432 * user buffer for @rule_locs on entry. On return, @data is the size
433 * of the filter table and @rule_locs contains the indices of the
436 * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or
437 * update. @fs.@location specifies the index to use and must not be
440 * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the index of an
441 * existing filter rule on entry.
443 * Implementation of indexed classification rules generally requires a
446 struct ethtool_rxnfc {
450 struct ethtool_rx_flow_spec fs;
458 struct compat_ethtool_rx_flow_spec {
461 struct ethtool_tcpip4_spec tcp_ip4_spec;
462 struct ethtool_tcpip4_spec udp_ip4_spec;
463 struct ethtool_tcpip4_spec sctp_ip4_spec;
464 struct ethtool_ah_espip4_spec ah_ip4_spec;
465 struct ethtool_ah_espip4_spec esp_ip4_spec;
466 struct ethtool_usrip4_spec usr_ip4_spec;
467 struct ethhdr ether_spec;
470 compat_u64 ring_cookie;
474 struct compat_ethtool_rxnfc {
478 struct compat_ethtool_rx_flow_spec fs;
483 #endif /* CONFIG_COMPAT */
484 #endif /* __KERNEL__ */
487 * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
488 * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
489 * @size: On entry, the array size of the user buffer. On return from
490 * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
491 * @ring_index: RX ring/queue index for each hash value
493 struct ethtool_rxfh_indir {
500 * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
501 * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
502 * @h_u: Flow field values to match (dependent on @flow_type)
503 * @m_u: Masks for flow field value bits to be ignored
504 * @vlan_tag: VLAN tag to match
505 * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
506 * @data: Driver-dependent data to match
507 * @data_mask: Mask for driver-dependent data bits to be ignored
508 * @action: RX ring/queue index to deliver to (non-negative) or other action
509 * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
511 * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
512 * a field value and mask are both zero this is treated as if all mask
513 * bits are set i.e. the field is ignored.
515 struct ethtool_rx_ntuple_flow_spec {
518 struct ethtool_tcpip4_spec tcp_ip4_spec;
519 struct ethtool_tcpip4_spec udp_ip4_spec;
520 struct ethtool_tcpip4_spec sctp_ip4_spec;
521 struct ethtool_ah_espip4_spec ah_ip4_spec;
522 struct ethtool_ah_espip4_spec esp_ip4_spec;
523 struct ethtool_usrip4_spec usr_ip4_spec;
524 struct ethhdr ether_spec;
534 #define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
535 #define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
539 * struct ethtool_rx_ntuple - command to set or clear RX flow filter
540 * @cmd: Command number - %ETHTOOL_SRXNTUPLE
541 * @fs: Flow filter specification
543 struct ethtool_rx_ntuple {
545 struct ethtool_rx_ntuple_flow_spec fs;
548 #define ETHTOOL_FLASH_MAX_FILENAME 128
549 enum ethtool_flash_op_type {
550 ETHTOOL_FLASH_ALL_REGIONS = 0,
553 /* for passing firmware flashing related parameters */
554 struct ethtool_flash {
557 char data[ETHTOOL_FLASH_MAX_FILENAME];
562 #include <linux/rculist.h>
564 struct ethtool_rx_ntuple_flow_spec_container {
565 struct ethtool_rx_ntuple_flow_spec fs;
566 struct list_head list;
569 struct ethtool_rx_ntuple_list {
570 #define ETHTOOL_MAX_NTUPLE_LIST_ENTRY 1024
571 #define ETHTOOL_MAX_NTUPLE_STRING_PER_ENTRY 14
572 struct list_head list;
578 /* Some generic methods drivers may use in their ethtool_ops */
579 u32 ethtool_op_get_link(struct net_device *dev);
580 u32 ethtool_op_get_rx_csum(struct net_device *dev);
581 u32 ethtool_op_get_tx_csum(struct net_device *dev);
582 int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
583 int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
584 int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
585 u32 ethtool_op_get_sg(struct net_device *dev);
586 int ethtool_op_set_sg(struct net_device *dev, u32 data);
587 u32 ethtool_op_get_tso(struct net_device *dev);
588 int ethtool_op_set_tso(struct net_device *dev, u32 data);
589 u32 ethtool_op_get_ufo(struct net_device *dev);
590 int ethtool_op_set_ufo(struct net_device *dev, u32 data);
591 u32 ethtool_op_get_flags(struct net_device *dev);
592 int ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported);
593 void ethtool_ntuple_flush(struct net_device *dev);
596 * ðtool_ops - Alter and report network device settings
597 * get_settings: Get device-specific settings
598 * set_settings: Set device-specific settings
599 * get_drvinfo: Report driver information
600 * get_regs: Get device registers
601 * get_wol: Report whether Wake-on-Lan is enabled
602 * set_wol: Turn Wake-on-Lan on or off
603 * get_msglevel: Report driver message level
604 * set_msglevel: Set driver message level
605 * nway_reset: Restart autonegotiation
606 * get_link: Get link status
607 * get_eeprom: Read data from the device EEPROM
608 * set_eeprom: Write data to the device EEPROM
609 * get_coalesce: Get interrupt coalescing parameters
610 * set_coalesce: Set interrupt coalescing parameters
611 * get_ringparam: Report ring sizes
612 * set_ringparam: Set ring sizes
613 * get_pauseparam: Report pause parameters
614 * set_pauseparam: Set pause parameters
615 * get_rx_csum: Report whether receive checksums are turned on or off
616 * set_rx_csum: Turn receive checksum on or off
617 * get_tx_csum: Report whether transmit checksums are turned on or off
618 * set_tx_csum: Turn transmit checksums on or off
619 * get_sg: Report whether scatter-gather is enabled
620 * set_sg: Turn scatter-gather on or off
621 * get_tso: Report whether TCP segmentation offload is enabled
622 * set_tso: Turn TCP segmentation offload on or off
623 * get_ufo: Report whether UDP fragmentation offload is enabled
624 * set_ufo: Turn UDP fragmentation offload on or off
625 * self_test: Run specified self-tests
626 * get_strings: Return a set of strings that describe the requested objects
627 * phys_id: Identify the device
628 * get_stats: Return statistics about the device
629 * get_flags: get 32-bit flags bitmap
630 * set_flags: set 32-bit flags bitmap
635 * @get_settings is passed an ðtool_cmd to fill in. It returns
636 * an negative errno or zero.
639 * @set_settings is passed an ðtool_cmd and should attempt to set
640 * all the settings this device supports. It may return an error value
641 * if something goes wrong (otherwise 0).
644 * Should fill in the magic field. Don't need to check len for zero
645 * or wraparound. Fill in the data argument with the eeprom values
646 * from offset to offset + len. Update len to the amount read.
647 * Returns an error or zero.
650 * Should validate the magic field. Don't need to check len for zero
651 * or wraparound. Update len to the amount written. Returns an error
655 int (*get_settings)(struct net_device *, struct ethtool_cmd *);
656 int (*set_settings)(struct net_device *, struct ethtool_cmd *);
657 void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
658 int (*get_regs_len)(struct net_device *);
659 void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
660 void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
661 int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
662 u32 (*get_msglevel)(struct net_device *);
663 void (*set_msglevel)(struct net_device *, u32);
664 int (*nway_reset)(struct net_device *);
665 u32 (*get_link)(struct net_device *);
666 int (*get_eeprom_len)(struct net_device *);
667 int (*get_eeprom)(struct net_device *,
668 struct ethtool_eeprom *, u8 *);
669 int (*set_eeprom)(struct net_device *,
670 struct ethtool_eeprom *, u8 *);
671 int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
672 int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
673 void (*get_ringparam)(struct net_device *,
674 struct ethtool_ringparam *);
675 int (*set_ringparam)(struct net_device *,
676 struct ethtool_ringparam *);
677 void (*get_pauseparam)(struct net_device *,
678 struct ethtool_pauseparam*);
679 int (*set_pauseparam)(struct net_device *,
680 struct ethtool_pauseparam*);
681 u32 (*get_rx_csum)(struct net_device *);
682 int (*set_rx_csum)(struct net_device *, u32);
683 u32 (*get_tx_csum)(struct net_device *);
684 int (*set_tx_csum)(struct net_device *, u32);
685 u32 (*get_sg)(struct net_device *);
686 int (*set_sg)(struct net_device *, u32);
687 u32 (*get_tso)(struct net_device *);
688 int (*set_tso)(struct net_device *, u32);
689 void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
690 void (*get_strings)(struct net_device *, u32 stringset, u8 *);
691 int (*phys_id)(struct net_device *, u32);
692 void (*get_ethtool_stats)(struct net_device *,
693 struct ethtool_stats *, u64 *);
694 int (*begin)(struct net_device *);
695 void (*complete)(struct net_device *);
696 u32 (*get_ufo)(struct net_device *);
697 int (*set_ufo)(struct net_device *, u32);
698 u32 (*get_flags)(struct net_device *);
699 int (*set_flags)(struct net_device *, u32);
700 u32 (*get_priv_flags)(struct net_device *);
701 int (*set_priv_flags)(struct net_device *, u32);
702 int (*get_sset_count)(struct net_device *, int);
703 int (*get_rxnfc)(struct net_device *,
704 struct ethtool_rxnfc *, void *);
705 int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
706 int (*flash_device)(struct net_device *, struct ethtool_flash *);
707 int (*reset)(struct net_device *, u32 *);
708 int (*set_rx_ntuple)(struct net_device *,
709 struct ethtool_rx_ntuple *);
710 int (*get_rx_ntuple)(struct net_device *, u32 stringset, void *);
711 int (*get_rxfh_indir)(struct net_device *,
712 struct ethtool_rxfh_indir *);
713 int (*set_rxfh_indir)(struct net_device *,
714 const struct ethtool_rxfh_indir *);
716 #endif /* __KERNEL__ */
718 /* CMDs currently supported */
719 #define ETHTOOL_GSET 0x00000001 /* Get settings. */
720 #define ETHTOOL_SSET 0x00000002 /* Set settings. */
721 #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
722 #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
723 #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
724 #define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
725 #define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
726 #define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
727 #define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
728 /* Get link status for host, i.e. whether the interface *and* the
729 * physical port (if there is one) are up (ethtool_value). */
730 #define ETHTOOL_GLINK 0x0000000a
731 #define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
732 #define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
733 #define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
734 #define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
735 #define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
736 #define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
737 #define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
738 #define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
739 #define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
740 #define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
741 #define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
742 #define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
743 #define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
745 #define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
746 * (ethtool_value). */
747 #define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
748 #define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
749 #define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
750 #define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
751 #define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
752 #define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
753 #define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
754 #define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
755 #define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
756 #define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
757 #define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
758 #define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
759 #define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
760 #define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
761 #define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
763 #define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
764 #define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
765 #define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
766 #define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
767 #define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
768 #define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
769 #define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
770 #define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
771 #define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
772 #define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
773 #define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
774 #define ETHTOOL_RESET 0x00000034 /* Reset hardware */
775 #define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
776 #define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
777 #define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
778 #define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
779 #define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
781 /* compatibility with older code */
782 #define SPARC_ETH_GSET ETHTOOL_GSET
783 #define SPARC_ETH_SSET ETHTOOL_SSET
785 /* Indicates what features are supported by the interface. */
786 #define SUPPORTED_10baseT_Half (1 << 0)
787 #define SUPPORTED_10baseT_Full (1 << 1)
788 #define SUPPORTED_100baseT_Half (1 << 2)
789 #define SUPPORTED_100baseT_Full (1 << 3)
790 #define SUPPORTED_1000baseT_Half (1 << 4)
791 #define SUPPORTED_1000baseT_Full (1 << 5)
792 #define SUPPORTED_Autoneg (1 << 6)
793 #define SUPPORTED_TP (1 << 7)
794 #define SUPPORTED_AUI (1 << 8)
795 #define SUPPORTED_MII (1 << 9)
796 #define SUPPORTED_FIBRE (1 << 10)
797 #define SUPPORTED_BNC (1 << 11)
798 #define SUPPORTED_10000baseT_Full (1 << 12)
799 #define SUPPORTED_Pause (1 << 13)
800 #define SUPPORTED_Asym_Pause (1 << 14)
801 #define SUPPORTED_2500baseX_Full (1 << 15)
802 #define SUPPORTED_Backplane (1 << 16)
803 #define SUPPORTED_1000baseKX_Full (1 << 17)
804 #define SUPPORTED_10000baseKX4_Full (1 << 18)
805 #define SUPPORTED_10000baseKR_Full (1 << 19)
806 #define SUPPORTED_10000baseR_FEC (1 << 20)
808 /* Indicates what features are advertised by the interface. */
809 #define ADVERTISED_10baseT_Half (1 << 0)
810 #define ADVERTISED_10baseT_Full (1 << 1)
811 #define ADVERTISED_100baseT_Half (1 << 2)
812 #define ADVERTISED_100baseT_Full (1 << 3)
813 #define ADVERTISED_1000baseT_Half (1 << 4)
814 #define ADVERTISED_1000baseT_Full (1 << 5)
815 #define ADVERTISED_Autoneg (1 << 6)
816 #define ADVERTISED_TP (1 << 7)
817 #define ADVERTISED_AUI (1 << 8)
818 #define ADVERTISED_MII (1 << 9)
819 #define ADVERTISED_FIBRE (1 << 10)
820 #define ADVERTISED_BNC (1 << 11)
821 #define ADVERTISED_10000baseT_Full (1 << 12)
822 #define ADVERTISED_Pause (1 << 13)
823 #define ADVERTISED_Asym_Pause (1 << 14)
824 #define ADVERTISED_2500baseX_Full (1 << 15)
825 #define ADVERTISED_Backplane (1 << 16)
826 #define ADVERTISED_1000baseKX_Full (1 << 17)
827 #define ADVERTISED_10000baseKX4_Full (1 << 18)
828 #define ADVERTISED_10000baseKR_Full (1 << 19)
829 #define ADVERTISED_10000baseR_FEC (1 << 20)
831 /* The following are all involved in forcing a particular link
832 * mode for the device for setting things. When getting the
833 * devices settings, these indicate the current mode and whether
834 * it was foced up into this mode or autonegotiated.
837 /* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
839 #define SPEED_100 100
840 #define SPEED_1000 1000
841 #define SPEED_2500 2500
842 #define SPEED_10000 10000
844 /* Duplex, half or full. */
845 #define DUPLEX_HALF 0x00
846 #define DUPLEX_FULL 0x01
848 /* Which connector port. */
850 #define PORT_AUI 0x01
851 #define PORT_MII 0x02
852 #define PORT_FIBRE 0x03
853 #define PORT_BNC 0x04
855 #define PORT_NONE 0xef
856 #define PORT_OTHER 0xff
858 /* Which transceiver to use. */
859 #define XCVR_INTERNAL 0x00
860 #define XCVR_EXTERNAL 0x01
861 #define XCVR_DUMMY1 0x02
862 #define XCVR_DUMMY2 0x03
863 #define XCVR_DUMMY3 0x04
865 /* Enable or disable autonegotiation. If this is set to enable,
866 * the forced link modes above are completely ignored.
868 #define AUTONEG_DISABLE 0x00
869 #define AUTONEG_ENABLE 0x01
871 /* Mode MDI or MDI-X */
872 #define ETH_TP_MDI_INVALID 0x00
873 #define ETH_TP_MDI 0x01
874 #define ETH_TP_MDI_X 0x02
876 /* Wake-On-Lan options. */
877 #define WAKE_PHY (1 << 0)
878 #define WAKE_UCAST (1 << 1)
879 #define WAKE_MCAST (1 << 2)
880 #define WAKE_BCAST (1 << 3)
881 #define WAKE_ARP (1 << 4)
882 #define WAKE_MAGIC (1 << 5)
883 #define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
885 /* L2-L4 network traffic flow types */
886 #define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
887 #define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
888 #define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
889 #define AH_ESP_V4_FLOW 0x04 /* hash only */
890 #define TCP_V6_FLOW 0x05 /* hash only */
891 #define UDP_V6_FLOW 0x06 /* hash only */
892 #define SCTP_V6_FLOW 0x07 /* hash only */
893 #define AH_ESP_V6_FLOW 0x08 /* hash only */
894 #define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
895 #define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
896 #define AH_V6_FLOW 0x0b /* hash only */
897 #define ESP_V6_FLOW 0x0c /* hash only */
898 #define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
899 #define IPV4_FLOW 0x10 /* hash only */
900 #define IPV6_FLOW 0x11 /* hash only */
901 #define ETHER_FLOW 0x12 /* spec only (ether_spec) */
903 /* L3-L4 network traffic flow hash options */
904 #define RXH_L2DA (1 << 1)
905 #define RXH_VLAN (1 << 2)
906 #define RXH_L3_PROTO (1 << 3)
907 #define RXH_IP_SRC (1 << 4)
908 #define RXH_IP_DST (1 << 5)
909 #define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
910 #define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
911 #define RXH_DISCARD (1 << 31)
913 #define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
916 /* The reset() operation must clear the flags for the components which
917 * were actually reset. On successful return, the flags indicate the
918 * components which were not reset, either because they do not exist
919 * in the hardware or because they cannot be reset independently. The
920 * driver must never reset any components that were not requested.
922 enum ethtool_reset_flags {
923 /* These flags represent components dedicated to the interface
924 * the command is addressed to. Shift any flag left by
925 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
928 ETH_RESET_MGMT = 1 << 0, /* Management processor */
929 ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
930 ETH_RESET_DMA = 1 << 2, /* DMA engine */
931 ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
932 ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
933 ETH_RESET_MAC = 1 << 5, /* Media access controller */
934 ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
935 ETH_RESET_RAM = 1 << 7, /* RAM shared between
936 * multiple components */
938 ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
940 ETH_RESET_ALL = 0xffffffff, /* All components used by this
941 * interface, even if shared */
943 #define ETH_RESET_SHARED_SHIFT 16
945 #endif /* _LINUX_ETHTOOL_H */