Linux-2.6.12-rc2
[linux-flexiantxendom0-natty.git] / include / linux / tty.h
1 #ifndef _LINUX_TTY_H
2 #define _LINUX_TTY_H
3
4 /*
5  * 'tty.h' defines some structures used by tty_io.c and some defines.
6  */
7
8 /*
9  * These constants are also useful for user-level apps (e.g., VC
10  * resizing).
11  */
12 #define MIN_NR_CONSOLES 1       /* must be at least 1 */
13 #define MAX_NR_CONSOLES 63      /* serial lines start at 64 */
14 #define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
15                 /* Note: the ioctl VT_GETSTATE does not work for
16                    consoles 16 and higher (since it returns a short) */
17
18 #ifdef __KERNEL__
19 #include <linux/config.h>
20 #include <linux/fs.h>
21 #include <linux/major.h>
22 #include <linux/termios.h>
23 #include <linux/workqueue.h>
24 #include <linux/tty_driver.h>
25 #include <linux/tty_ldisc.h>
26
27 #include <asm/system.h>
28
29
30 /*
31  * (Note: the *_driver.minor_start values 1, 64, 128, 192 are
32  * hardcoded at present.)
33  */
34 #define NR_PTYS CONFIG_LEGACY_PTY_COUNT   /* Number of legacy ptys */
35 #define NR_UNIX98_PTY_DEFAULT   4096      /* Default maximum for Unix98 ptys */
36 #define NR_UNIX98_PTY_MAX       (1 << MINORBITS) /* Absolute limit */
37 #define NR_LDISCS               16
38
39 /*
40  * These are set up by the setup-routine at boot-time:
41  */
42
43 struct screen_info {
44         u8  orig_x;             /* 0x00 */
45         u8  orig_y;             /* 0x01 */
46         u16 dontuse1;           /* 0x02 -- EXT_MEM_K sits here */
47         u16 orig_video_page;    /* 0x04 */
48         u8  orig_video_mode;    /* 0x06 */
49         u8  orig_video_cols;    /* 0x07 */
50         u16 unused2;            /* 0x08 */
51         u16 orig_video_ega_bx;  /* 0x0a */
52         u16 unused3;            /* 0x0c */
53         u8  orig_video_lines;   /* 0x0e */
54         u8  orig_video_isVGA;   /* 0x0f */
55         u16 orig_video_points;  /* 0x10 */
56
57         /* VESA graphic mode -- linear frame buffer */
58         u16 lfb_width;          /* 0x12 */
59         u16 lfb_height;         /* 0x14 */
60         u16 lfb_depth;          /* 0x16 */
61         u32 lfb_base;           /* 0x18 */
62         u32 lfb_size;           /* 0x1c */
63         u16 dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */
64         u16 lfb_linelength;     /* 0x24 */
65         u8  red_size;           /* 0x26 */
66         u8  red_pos;            /* 0x27 */
67         u8  green_size;         /* 0x28 */
68         u8  green_pos;          /* 0x29 */
69         u8  blue_size;          /* 0x2a */
70         u8  blue_pos;           /* 0x2b */
71         u8  rsvd_size;          /* 0x2c */
72         u8  rsvd_pos;           /* 0x2d */
73         u16 vesapm_seg;         /* 0x2e */
74         u16 vesapm_off;         /* 0x30 */
75         u16 pages;              /* 0x32 */
76         u16 vesa_attributes;    /* 0x34 */
77                                 /* 0x36 -- 0x3f reserved for future expansion */
78 };
79
80 extern struct screen_info screen_info;
81
82 #define ORIG_X                  (screen_info.orig_x)
83 #define ORIG_Y                  (screen_info.orig_y)
84 #define ORIG_VIDEO_MODE         (screen_info.orig_video_mode)
85 #define ORIG_VIDEO_COLS         (screen_info.orig_video_cols)
86 #define ORIG_VIDEO_EGA_BX       (screen_info.orig_video_ega_bx)
87 #define ORIG_VIDEO_LINES        (screen_info.orig_video_lines)
88 #define ORIG_VIDEO_ISVGA        (screen_info.orig_video_isVGA)
89 #define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
90
91 #define VIDEO_TYPE_MDA          0x10    /* Monochrome Text Display      */
92 #define VIDEO_TYPE_CGA          0x11    /* CGA Display                  */
93 #define VIDEO_TYPE_EGAM         0x20    /* EGA/VGA in Monochrome Mode   */
94 #define VIDEO_TYPE_EGAC         0x21    /* EGA in Color Mode            */
95 #define VIDEO_TYPE_VGAC         0x22    /* VGA+ in Color Mode           */
96 #define VIDEO_TYPE_VLFB         0x23    /* VESA VGA in graphic mode     */
97
98 #define VIDEO_TYPE_PICA_S3      0x30    /* ACER PICA-61 local S3 video  */
99 #define VIDEO_TYPE_MIPS_G364    0x31    /* MIPS Magnum 4000 G364 video  */
100 #define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
101
102 #define VIDEO_TYPE_TGAC         0x40    /* DEC TGA */
103
104 #define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
105 #define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
106
107 #define VIDEO_TYPE_PMAC         0x60    /* PowerMacintosh frame buffer. */
108
109 /*
110  * This character is the same as _POSIX_VDISABLE: it cannot be used as
111  * a c_cc[] character, but indicates that a particular special character
112  * isn't in use (eg VINTR has no character etc)
113  */
114 #define __DISABLED_CHAR '\0'
115
116 /*
117  * This is the flip buffer used for the tty driver.  The buffer is
118  * located in the tty structure, and is used as a high speed interface
119  * between the tty driver and the tty line discipline.
120  */
121 #define TTY_FLIPBUF_SIZE 512
122
123 struct tty_flip_buffer {
124         struct work_struct              work;
125         struct semaphore pty_sem;
126         char            *char_buf_ptr;
127         unsigned char   *flag_buf_ptr;
128         int             count;
129         int             buf_num;
130         unsigned char   char_buf[2*TTY_FLIPBUF_SIZE];
131         char            flag_buf[2*TTY_FLIPBUF_SIZE];
132         unsigned char   slop[4]; /* N.B. bug overwrites buffer by 1 */
133 };
134 /*
135  * The pty uses char_buf and flag_buf as a contiguous buffer
136  */
137 #define PTY_BUF_SIZE    4*TTY_FLIPBUF_SIZE
138
139 /*
140  * When a break, frame error, or parity error happens, these codes are
141  * stuffed into the flags buffer.
142  */
143 #define TTY_NORMAL      0
144 #define TTY_BREAK       1
145 #define TTY_FRAME       2
146 #define TTY_PARITY      3
147 #define TTY_OVERRUN     4
148
149 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
150 #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
151 #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
152 #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
153 #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
154 #define TIME_CHAR(tty) ((tty)->termios->c_cc[VTIME])
155 #define MIN_CHAR(tty) ((tty)->termios->c_cc[VMIN])
156 #define SWTC_CHAR(tty) ((tty)->termios->c_cc[VSWTC])
157 #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
158 #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
159 #define SUSP_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
160 #define EOL_CHAR(tty) ((tty)->termios->c_cc[VEOL])
161 #define REPRINT_CHAR(tty) ((tty)->termios->c_cc[VREPRINT])
162 #define DISCARD_CHAR(tty) ((tty)->termios->c_cc[VDISCARD])
163 #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
164 #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
165 #define EOL2_CHAR(tty) ((tty)->termios->c_cc[VEOL2])
166
167 #define _I_FLAG(tty,f)  ((tty)->termios->c_iflag & (f))
168 #define _O_FLAG(tty,f)  ((tty)->termios->c_oflag & (f))
169 #define _C_FLAG(tty,f)  ((tty)->termios->c_cflag & (f))
170 #define _L_FLAG(tty,f)  ((tty)->termios->c_lflag & (f))
171
172 #define I_IGNBRK(tty)   _I_FLAG((tty),IGNBRK)
173 #define I_BRKINT(tty)   _I_FLAG((tty),BRKINT)
174 #define I_IGNPAR(tty)   _I_FLAG((tty),IGNPAR)
175 #define I_PARMRK(tty)   _I_FLAG((tty),PARMRK)
176 #define I_INPCK(tty)    _I_FLAG((tty),INPCK)
177 #define I_ISTRIP(tty)   _I_FLAG((tty),ISTRIP)
178 #define I_INLCR(tty)    _I_FLAG((tty),INLCR)
179 #define I_IGNCR(tty)    _I_FLAG((tty),IGNCR)
180 #define I_ICRNL(tty)    _I_FLAG((tty),ICRNL)
181 #define I_IUCLC(tty)    _I_FLAG((tty),IUCLC)
182 #define I_IXON(tty)     _I_FLAG((tty),IXON)
183 #define I_IXANY(tty)    _I_FLAG((tty),IXANY)
184 #define I_IXOFF(tty)    _I_FLAG((tty),IXOFF)
185 #define I_IMAXBEL(tty)  _I_FLAG((tty),IMAXBEL)
186 #define I_IUTF8(tty)    _I_FLAG((tty),IUTF8)
187
188 #define O_OPOST(tty)    _O_FLAG((tty),OPOST)
189 #define O_OLCUC(tty)    _O_FLAG((tty),OLCUC)
190 #define O_ONLCR(tty)    _O_FLAG((tty),ONLCR)
191 #define O_OCRNL(tty)    _O_FLAG((tty),OCRNL)
192 #define O_ONOCR(tty)    _O_FLAG((tty),ONOCR)
193 #define O_ONLRET(tty)   _O_FLAG((tty),ONLRET)
194 #define O_OFILL(tty)    _O_FLAG((tty),OFILL)
195 #define O_OFDEL(tty)    _O_FLAG((tty),OFDEL)
196 #define O_NLDLY(tty)    _O_FLAG((tty),NLDLY)
197 #define O_CRDLY(tty)    _O_FLAG((tty),CRDLY)
198 #define O_TABDLY(tty)   _O_FLAG((tty),TABDLY)
199 #define O_BSDLY(tty)    _O_FLAG((tty),BSDLY)
200 #define O_VTDLY(tty)    _O_FLAG((tty),VTDLY)
201 #define O_FFDLY(tty)    _O_FLAG((tty),FFDLY)
202
203 #define C_BAUD(tty)     _C_FLAG((tty),CBAUD)
204 #define C_CSIZE(tty)    _C_FLAG((tty),CSIZE)
205 #define C_CSTOPB(tty)   _C_FLAG((tty),CSTOPB)
206 #define C_CREAD(tty)    _C_FLAG((tty),CREAD)
207 #define C_PARENB(tty)   _C_FLAG((tty),PARENB)
208 #define C_PARODD(tty)   _C_FLAG((tty),PARODD)
209 #define C_HUPCL(tty)    _C_FLAG((tty),HUPCL)
210 #define C_CLOCAL(tty)   _C_FLAG((tty),CLOCAL)
211 #define C_CIBAUD(tty)   _C_FLAG((tty),CIBAUD)
212 #define C_CRTSCTS(tty)  _C_FLAG((tty),CRTSCTS)
213
214 #define L_ISIG(tty)     _L_FLAG((tty),ISIG)
215 #define L_ICANON(tty)   _L_FLAG((tty),ICANON)
216 #define L_XCASE(tty)    _L_FLAG((tty),XCASE)
217 #define L_ECHO(tty)     _L_FLAG((tty),ECHO)
218 #define L_ECHOE(tty)    _L_FLAG((tty),ECHOE)
219 #define L_ECHOK(tty)    _L_FLAG((tty),ECHOK)
220 #define L_ECHONL(tty)   _L_FLAG((tty),ECHONL)
221 #define L_NOFLSH(tty)   _L_FLAG((tty),NOFLSH)
222 #define L_TOSTOP(tty)   _L_FLAG((tty),TOSTOP)
223 #define L_ECHOCTL(tty)  _L_FLAG((tty),ECHOCTL)
224 #define L_ECHOPRT(tty)  _L_FLAG((tty),ECHOPRT)
225 #define L_ECHOKE(tty)   _L_FLAG((tty),ECHOKE)
226 #define L_FLUSHO(tty)   _L_FLAG((tty),FLUSHO)
227 #define L_PENDIN(tty)   _L_FLAG((tty),PENDIN)
228 #define L_IEXTEN(tty)   _L_FLAG((tty),IEXTEN)
229
230 struct device;
231 /*
232  * Where all of the state associated with a tty is kept while the tty
233  * is open.  Since the termios state should be kept even if the tty
234  * has been closed --- for things like the baud rate, etc --- it is
235  * not stored here, but rather a pointer to the real state is stored
236  * here.  Possible the winsize structure should have the same
237  * treatment, but (1) the default 80x24 is usually right and (2) it's
238  * most often used by a windowing system, which will set the correct
239  * size each time the window is created or resized anyway.
240  *                                              - TYT, 9/14/92
241  */
242 struct tty_struct {
243         int     magic;
244         struct tty_driver *driver;
245         int index;
246         struct tty_ldisc ldisc;
247         struct semaphore termios_sem;
248         struct termios *termios, *termios_locked;
249         char name[64];
250         int pgrp;
251         int session;
252         unsigned long flags;
253         int count;
254         struct winsize winsize;
255         unsigned char stopped:1, hw_stopped:1, flow_stopped:1, packet:1;
256         unsigned char low_latency:1, warned:1;
257         unsigned char ctrl_status;
258
259         struct tty_struct *link;
260         struct fasync_struct *fasync;
261         struct tty_flip_buffer flip;
262         int max_flip_cnt;
263         int alt_speed;          /* For magic substitution of 38400 bps */
264         wait_queue_head_t write_wait;
265         wait_queue_head_t read_wait;
266         struct work_struct hangup_work;
267         void *disc_data;
268         void *driver_data;
269         struct list_head tty_files;
270
271 #define N_TTY_BUF_SIZE 4096
272         
273         /*
274          * The following is data for the N_TTY line discipline.  For
275          * historical reasons, this is included in the tty structure.
276          */
277         unsigned int column;
278         unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1;
279         unsigned char closing:1;
280         unsigned short minimum_to_wake;
281         unsigned long overrun_time;
282         int num_overrun;
283         unsigned long process_char_map[256/(8*sizeof(unsigned long))];
284         char *read_buf;
285         int read_head;
286         int read_tail;
287         int read_cnt;
288         unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))];
289         int canon_data;
290         unsigned long canon_head;
291         unsigned int canon_column;
292         struct semaphore atomic_read;
293         struct semaphore atomic_write;
294         unsigned char *write_buf;
295         int write_cnt;
296         spinlock_t read_lock;
297         /* If the tty has a pending do_SAK, queue it here - akpm */
298         struct work_struct SAK_work;
299 };
300
301 /* tty magic number */
302 #define TTY_MAGIC               0x5401
303
304 /*
305  * These bits are used in the flags field of the tty structure.
306  * 
307  * So that interrupts won't be able to mess up the queues,
308  * copy_to_cooked must be atomic with respect to itself, as must
309  * tty->write.  Thus, you must use the inline functions set_bit() and
310  * clear_bit() to make things atomic.
311  */
312 #define TTY_THROTTLED           0       /* Call unthrottle() at threshold min */
313 #define TTY_IO_ERROR            1       /* Canse an I/O error (may be no ldisc too) */
314 #define TTY_OTHER_CLOSED        2       /* Other side (if any) has closed */
315 #define TTY_EXCLUSIVE           3       /* Exclusive open mode */
316 #define TTY_DEBUG               4       /* Debugging */
317 #define TTY_DO_WRITE_WAKEUP     5       /* Call write_wakeup after queuing new */
318 #define TTY_PUSH                6       /* n_tty private */
319 #define TTY_CLOSING             7       /* ->close() in progress */
320 #define TTY_DONT_FLIP           8       /* Defer buffer flip */
321 #define TTY_LDISC               9       /* Line discipline attached */
322 #define TTY_HW_COOK_OUT         14      /* Hardware can do output cooking */
323 #define TTY_HW_COOK_IN          15      /* Hardware can do input cooking */
324 #define TTY_PTY_LOCK            16      /* pty private */
325 #define TTY_NO_WRITE_SPLIT      17      /* Preserve write boundaries to driver */
326 #define TTY_HUPPED              18      /* Post driver->hangup() */
327
328 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
329
330 extern void tty_write_flush(struct tty_struct *);
331
332 extern struct termios tty_std_termios;
333 extern int fg_console, last_console, want_console;
334
335 extern int kmsg_redirect;
336
337 extern void console_init(void);
338 extern int vcs_init(void);
339
340 extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
341                               const char *routine);
342 extern char *tty_name(struct tty_struct *tty, char *buf);
343 extern void tty_wait_until_sent(struct tty_struct * tty, long timeout);
344 extern int tty_check_change(struct tty_struct * tty);
345 extern void stop_tty(struct tty_struct * tty);
346 extern void start_tty(struct tty_struct * tty);
347 extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
348 extern int tty_register_driver(struct tty_driver *driver);
349 extern int tty_unregister_driver(struct tty_driver *driver);
350 extern void tty_register_device(struct tty_driver *driver, unsigned index, struct device *dev);
351 extern void tty_unregister_device(struct tty_driver *driver, unsigned index);
352 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
353                              int buflen);
354 extern void tty_write_message(struct tty_struct *tty, char *msg);
355
356 extern int is_orphaned_pgrp(int pgrp);
357 extern int is_ignored(int sig);
358 extern int tty_signal(int sig, struct tty_struct *tty);
359 extern void tty_hangup(struct tty_struct * tty);
360 extern void tty_vhangup(struct tty_struct * tty);
361 extern void tty_unhangup(struct file *filp);
362 extern int tty_hung_up_p(struct file * filp);
363 extern void do_SAK(struct tty_struct *tty);
364 extern void disassociate_ctty(int priv);
365 extern void tty_flip_buffer_push(struct tty_struct *tty);
366 extern int tty_get_baud_rate(struct tty_struct *tty);
367 extern int tty_termios_baud_rate(struct termios *termios);
368
369 extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
370 extern void tty_ldisc_deref(struct tty_ldisc *);
371 extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
372
373 extern struct tty_ldisc *tty_ldisc_get(int);
374 extern void tty_ldisc_put(int);
375
376 extern void tty_wakeup(struct tty_struct *tty);
377 extern void tty_ldisc_flush(struct tty_struct *tty);
378
379 struct semaphore;
380 extern struct semaphore tty_sem;
381
382 /* n_tty.c */
383 extern struct tty_ldisc tty_ldisc_N_TTY;
384
385 /* tty_ioctl.c */
386 extern int n_tty_ioctl(struct tty_struct * tty, struct file * file,
387                        unsigned int cmd, unsigned long arg);
388
389 /* serial.c */
390
391 extern void serial_console_init(void);
392  
393 /* pcxx.c */
394
395 extern int pcxe_open(struct tty_struct *tty, struct file *filp);
396
397 /* printk.c */
398
399 extern void console_print(const char *);
400
401 /* vt.c */
402
403 extern int vt_ioctl(struct tty_struct *tty, struct file * file,
404                     unsigned int cmd, unsigned long arg);
405
406 static inline dev_t tty_devnum(struct tty_struct *tty)
407 {
408         return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
409 }
410
411 #endif /* __KERNEL__ */
412 #endif