Linux-2.6.12-rc2
[linux-flexiantxendom0-natty.git] / include / asm-arm / dma-mapping.h
1 #ifndef ASMARM_DMA_MAPPING_H
2 #define ASMARM_DMA_MAPPING_H
3
4 #ifdef __KERNEL__
5
6 #include <linux/config.h>
7 #include <linux/mm.h> /* need struct page */
8
9 #include <asm/scatterlist.h>
10
11 /*
12  * DMA-consistent mapping functions.  These allocate/free a region of
13  * uncached, unwrite-buffered mapped memory space for use with DMA
14  * devices.  This is the "generic" version.  The PCI specific version
15  * is in pci.h
16  */
17 extern void consistent_sync(void *kaddr, size_t size, int rw);
18
19 /*
20  * Return whether the given device DMA address mask can be supported
21  * properly.  For example, if your device can only drive the low 24-bits
22  * during bus mastering, then you would pass 0x00ffffff as the mask
23  * to this function.
24  */
25 static inline int dma_supported(struct device *dev, u64 mask)
26 {
27         return dev->dma_mask && *dev->dma_mask != 0;
28 }
29
30 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
31 {
32         if (!dev->dma_mask || !dma_supported(dev, dma_mask))
33                 return -EIO;
34
35         *dev->dma_mask = dma_mask;
36
37         return 0;
38 }
39
40 static inline int dma_get_cache_alignment(void)
41 {
42         return 32;
43 }
44
45 static inline int dma_is_consistent(dma_addr_t handle)
46 {
47         return 0;
48 }
49
50 /*
51  * DMA errors are defined by all-bits-set in the DMA address.
52  */
53 static inline int dma_mapping_error(dma_addr_t dma_addr)
54 {
55         return dma_addr == ~0;
56 }
57
58 /**
59  * dma_alloc_coherent - allocate consistent memory for DMA
60  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
61  * @size: required memory size
62  * @handle: bus-specific DMA address
63  *
64  * Allocate some uncached, unbuffered memory for a device for
65  * performing DMA.  This function allocates pages, and will
66  * return the CPU-viewed address, and sets @handle to be the
67  * device-viewed address.
68  */
69 extern void *
70 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
71
72 /**
73  * dma_free_coherent - free memory allocated by dma_alloc_coherent
74  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
75  * @size: size of memory originally requested in dma_alloc_coherent
76  * @cpu_addr: CPU-view address returned from dma_alloc_coherent
77  * @handle: device-view address returned from dma_alloc_coherent
78  *
79  * Free (and unmap) a DMA buffer previously allocated by
80  * dma_alloc_coherent().
81  *
82  * References to memory and mappings associated with cpu_addr/handle
83  * during and after this call executing are illegal.
84  */
85 extern void
86 dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
87                   dma_addr_t handle);
88
89 /**
90  * dma_mmap_coherent - map a coherent DMA allocation into user space
91  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
92  * @vma: vm_area_struct describing requested user mapping
93  * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
94  * @handle: device-view address returned from dma_alloc_coherent
95  * @size: size of memory originally requested in dma_alloc_coherent
96  *
97  * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
98  * into user space.  The coherent DMA buffer must not be freed by the
99  * driver until the user space mapping has been released.
100  */
101 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
102                       void *cpu_addr, dma_addr_t handle, size_t size);
103
104
105 /**
106  * dma_alloc_writecombine - allocate writecombining memory for DMA
107  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
108  * @size: required memory size
109  * @handle: bus-specific DMA address
110  *
111  * Allocate some uncached, buffered memory for a device for
112  * performing DMA.  This function allocates pages, and will
113  * return the CPU-viewed address, and sets @handle to be the
114  * device-viewed address.
115  */
116 extern void *
117 dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
118
119 #define dma_free_writecombine(dev,size,cpu_addr,handle) \
120         dma_free_coherent(dev,size,cpu_addr,handle)
121
122 int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
123                           void *cpu_addr, dma_addr_t handle, size_t size);
124
125
126 /**
127  * dma_map_single - map a single buffer for streaming DMA
128  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
129  * @cpu_addr: CPU direct mapped address of buffer
130  * @size: size of buffer to map
131  * @dir: DMA transfer direction
132  *
133  * Ensure that any data held in the cache is appropriately discarded
134  * or written back.
135  *
136  * The device owns this memory once this call has completed.  The CPU
137  * can regain ownership by calling dma_unmap_single() or
138  * dma_sync_single_for_cpu().
139  */
140 #ifndef CONFIG_DMABOUNCE
141 static inline dma_addr_t
142 dma_map_single(struct device *dev, void *cpu_addr, size_t size,
143                enum dma_data_direction dir)
144 {
145         consistent_sync(cpu_addr, size, dir);
146         return virt_to_dma(dev, (unsigned long)cpu_addr);
147 }
148 #else
149 extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
150 #endif
151
152 /**
153  * dma_map_page - map a portion of a page for streaming DMA
154  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
155  * @page: page that buffer resides in
156  * @offset: offset into page for start of buffer
157  * @size: size of buffer to map
158  * @dir: DMA transfer direction
159  *
160  * Ensure that any data held in the cache is appropriately discarded
161  * or written back.
162  *
163  * The device owns this memory once this call has completed.  The CPU
164  * can regain ownership by calling dma_unmap_page() or
165  * dma_sync_single_for_cpu().
166  */
167 static inline dma_addr_t
168 dma_map_page(struct device *dev, struct page *page,
169              unsigned long offset, size_t size,
170              enum dma_data_direction dir)
171 {
172         return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
173 }
174
175 /**
176  * dma_unmap_single - unmap a single buffer previously mapped
177  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
178  * @handle: DMA address of buffer
179  * @size: size of buffer to map
180  * @dir: DMA transfer direction
181  *
182  * Unmap a single streaming mode DMA translation.  The handle and size
183  * must match what was provided in the previous dma_map_single() call.
184  * All other usages are undefined.
185  *
186  * After this call, reads by the CPU to the buffer are guaranteed to see
187  * whatever the device wrote there.
188  */
189 #ifndef CONFIG_DMABOUNCE
190 static inline void
191 dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
192                  enum dma_data_direction dir)
193 {
194         /* nothing to do */
195 }
196 #else
197 extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
198 #endif
199
200 /**
201  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
202  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
203  * @handle: DMA address of buffer
204  * @size: size of buffer to map
205  * @dir: DMA transfer direction
206  *
207  * Unmap a single streaming mode DMA translation.  The handle and size
208  * must match what was provided in the previous dma_map_single() call.
209  * All other usages are undefined.
210  *
211  * After this call, reads by the CPU to the buffer are guaranteed to see
212  * whatever the device wrote there.
213  */
214 static inline void
215 dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
216                enum dma_data_direction dir)
217 {
218         dma_unmap_single(dev, handle, size, (int)dir);
219 }
220
221 /**
222  * dma_map_sg - map a set of SG buffers for streaming mode DMA
223  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
224  * @sg: list of buffers
225  * @nents: number of buffers to map
226  * @dir: DMA transfer direction
227  *
228  * Map a set of buffers described by scatterlist in streaming
229  * mode for DMA.  This is the scatter-gather version of the
230  * above dma_map_single interface.  Here the scatter gather list
231  * elements are each tagged with the appropriate dma address
232  * and length.  They are obtained via sg_dma_{address,length}(SG).
233  *
234  * NOTE: An implementation may be able to use a smaller number of
235  *       DMA address/length pairs than there are SG table elements.
236  *       (for example via virtual mapping capabilities)
237  *       The routine returns the number of addr/length pairs actually
238  *       used, at most nents.
239  *
240  * Device ownership issues as mentioned above for dma_map_single are
241  * the same here.
242  */
243 #ifndef CONFIG_DMABOUNCE
244 static inline int
245 dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
246            enum dma_data_direction dir)
247 {
248         int i;
249
250         for (i = 0; i < nents; i++, sg++) {
251                 char *virt;
252
253                 sg->dma_address = page_to_dma(dev, sg->page) + sg->offset;
254                 virt = page_address(sg->page) + sg->offset;
255                 consistent_sync(virt, sg->length, dir);
256         }
257
258         return nents;
259 }
260 #else
261 extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
262 #endif
263
264 /**
265  * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
266  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
267  * @sg: list of buffers
268  * @nents: number of buffers to map
269  * @dir: DMA transfer direction
270  *
271  * Unmap a set of streaming mode DMA translations.
272  * Again, CPU read rules concerning calls here are the same as for
273  * dma_unmap_single() above.
274  */
275 #ifndef CONFIG_DMABOUNCE
276 static inline void
277 dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
278              enum dma_data_direction dir)
279 {
280
281         /* nothing to do */
282 }
283 #else
284 extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
285 #endif
286
287
288 /**
289  * dma_sync_single_for_cpu
290  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
291  * @handle: DMA address of buffer
292  * @size: size of buffer to map
293  * @dir: DMA transfer direction
294  *
295  * Make physical memory consistent for a single streaming mode DMA
296  * translation after a transfer.
297  *
298  * If you perform a dma_map_single() but wish to interrogate the
299  * buffer using the cpu, yet do not wish to teardown the PCI dma
300  * mapping, you must call this function before doing so.  At the
301  * next point you give the PCI dma address back to the card, you
302  * must first the perform a dma_sync_for_device, and then the
303  * device again owns the buffer.
304  */
305 #ifndef CONFIG_DMABOUNCE
306 static inline void
307 dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
308                         enum dma_data_direction dir)
309 {
310         consistent_sync((void *)dma_to_virt(dev, handle), size, dir);
311 }
312
313 static inline void
314 dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
315                            enum dma_data_direction dir)
316 {
317         consistent_sync((void *)dma_to_virt(dev, handle), size, dir);
318 }
319 #else
320 extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
321 extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
322 #endif
323
324
325 /**
326  * dma_sync_sg_for_cpu
327  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
328  * @sg: list of buffers
329  * @nents: number of buffers to map
330  * @dir: DMA transfer direction
331  *
332  * Make physical memory consistent for a set of streaming
333  * mode DMA translations after a transfer.
334  *
335  * The same as dma_sync_single_for_* but for a scatter-gather list,
336  * same rules and usage.
337  */
338 #ifndef CONFIG_DMABOUNCE
339 static inline void
340 dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
341                     enum dma_data_direction dir)
342 {
343         int i;
344
345         for (i = 0; i < nents; i++, sg++) {
346                 char *virt = page_address(sg->page) + sg->offset;
347                 consistent_sync(virt, sg->length, dir);
348         }
349 }
350
351 static inline void
352 dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
353                        enum dma_data_direction dir)
354 {
355         int i;
356
357         for (i = 0; i < nents; i++, sg++) {
358                 char *virt = page_address(sg->page) + sg->offset;
359                 consistent_sync(virt, sg->length, dir);
360         }
361 }
362 #else
363 extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
364 extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
365 #endif
366
367 #ifdef CONFIG_DMABOUNCE
368 /*
369  * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
370  * and utilize bounce buffers as needed to work around limited DMA windows.
371  *
372  * On the SA-1111, a bug limits DMA to only certain regions of RAM.
373  * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
374  * On some ADI engineering sytems, PCI inbound window is 32MB (12MB total RAM)
375  *
376  * The following are helper functions used by the dmabounce subystem
377  *
378  */
379
380 /**
381  * dmabounce_register_dev
382  *
383  * @dev: valid struct device pointer
384  * @small_buf_size: size of buffers to use with small buffer pool
385  * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
386  *
387  * This function should be called by low-level platform code to register
388  * a device as requireing DMA buffer bouncing. The function will allocate
389  * appropriate DMA pools for the device.
390  *
391  */
392 extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
393
394 /**
395  * dmabounce_unregister_dev
396  *
397  * @dev: valid struct device pointer
398  *
399  * This function should be called by low-level platform code when device
400  * that was previously registered with dmabounce_register_dev is removed
401  * from the system.
402  *
403  */
404 extern void dmabounce_unregister_dev(struct device *);
405
406 /**
407  * dma_needs_bounce
408  *
409  * @dev: valid struct device pointer
410  * @dma_handle: dma_handle of unbounced buffer
411  * @size: size of region being mapped
412  *
413  * Platforms that utilize the dmabounce mechanism must implement
414  * this function.
415  *
416  * The dmabounce routines call this function whenever a dma-mapping
417  * is requested to determine whether a given buffer needs to be bounced
418  * or not. The function must return 0 if the the buffer is OK for
419  * DMA access and 1 if the buffer needs to be bounced.
420  *
421  */
422 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
423 #endif /* CONFIG_DMABOUNCE */
424
425 #endif /* __KERNEL__ */
426 #endif