drivers/usb/serial/ipw.c

   1 /*
   2  * IPWireless 3G UMTS TDD Modem driver (USB connected)
   3  *
   4  *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
   5  *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
   6  *
   7  *   This program is free software; you can redistribute it and/or modify
   8  *   it under the terms of the GNU General Public License as published by
   9  *   the Free Software Foundation; either version 2 of the License, or
  10  *   (at your option) any later version.
  11  *
  12  * All information about the device was acquired using SnoopyPro
  13  * on MSFT's O/S, and examing the MSFT drivers' debug output
  14  * (insanely left _on_ in the enduser version)
  15  *
  16  * It was written out of frustration with the IPWireless USB modem
  17  * supplied by Axity3G/Sentech South Africa not supporting
  18  * Linux whatsoever.
  19  *
  20  * Nobody provided any proprietary information that was not already
  21  * available for this device.
  22  *
  23  * The modem adheres to the "3GPP TS  27.007 AT command set for 3G
  24  * User Equipment (UE)" standard, available from
  25  * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
  26  *
  27  * The code was only tested the IPWireless handheld modem distributed
  28  * in South Africa by Sentech.
  29  *
  30  * It may work for Woosh Inc in .nz too, as it appears they use the
  31  * same kit.
  32  *
  33  * There is still some work to be done in terms of handling
  34  * DCD, DTR, RTS, CTS which are currently faked.
  35  * It's good enough for PPP at this point. It's based off all kinds of
  36  * code found in usb/serial and usb/class
  37  *
  38  */
  39
  40 #include <linux/kernel.h>
  41 #include <linux/errno.h>
  42 #include <linux/init.h>
  43 #include <linux/slab.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_flip.h>
  46 #include <linux/module.h>
  47 #include <linux/spinlock.h>
  48 #include <linux/usb.h>
  49 #include <linux/usb.h>
  50 #include <asm/uaccess.h>
  51 #include "usb-serial.h"
  52
  53 /*
  54  * Version Information
  55  */
  56 #define DRIVER_VERSION  "v0.3"
  57 #define DRIVER_AUTHOR   "Roelf Diedericks"
  58 #define DRIVER_DESC     "IPWireless tty driver"
  59
  60 #define IPW_TTY_MAJOR   240     /* real device node major id, experimental range */
  61 #define IPW_TTY_MINORS  256     /* we support 256 devices, dunno why, it'd be insane :) */
  62
  63 #define USB_IPW_MAGIC   0x6d02  /* magic number for ipw struct */
  64
  65
  66 /* Message sizes */
  67 #define EVENT_BUFFER_SIZE       0xFF
  68 #define CHAR2INT16(c1,c0)       (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
  69 #define NUM_BULK_URBS           24
  70 #define NUM_CONTROL_URBS        16
  71
  72 /* vendor/product pairs that are known work with this driver*/
  73 #define IPW_VID         0x0bc3
  74 #define IPW_PID         0x0001
  75
  76
  77 /* Vendor commands: */
  78
  79 /* baud rates */
  80 enum {
  81         ipw_sio_b256000 = 0x000e,
  82         ipw_sio_b128000 = 0x001d,
  83         ipw_sio_b115200 = 0x0020,
  84         ipw_sio_b57600  = 0x0040,
  85         ipw_sio_b56000  = 0x0042,
  86         ipw_sio_b38400  = 0x0060,
  87         ipw_sio_b19200  = 0x00c0,
  88         ipw_sio_b14400  = 0x0100,
  89         ipw_sio_b9600   = 0x0180,
  90         ipw_sio_b4800   = 0x0300,
  91         ipw_sio_b2400   = 0x0600,
  92         ipw_sio_b1200   = 0x0c00,
  93         ipw_sio_b600    = 0x1800
  94 };
  95
  96 /* data bits */
  97 #define ipw_dtb_7               0x700
  98 #define ipw_dtb_8               0x810   // ok so the define is misleading, I know, but forces 8,n,1
  99                                         // I mean, is there a point to any other setting these days? :)
 100
 101 /* usb control request types : */
 102 #define IPW_SIO_RXCTL           0x00    // control bulk rx channel transmissions, value=1/0 (on/off)
 103 #define IPW_SIO_SET_BAUD        0x01    // set baud, value=requested ipw_sio_bxxxx
 104 #define IPW_SIO_SET_LINE        0x03    // set databits, parity. value=ipw_dtb_x
 105 #define IPW_SIO_SET_PIN         0x03    // set/clear dtr/rts value=ipw_pin_xxx
 106 #define IPW_SIO_POLL            0x08    // get serial port status byte, call with value=0
 107 #define IPW_SIO_INIT            0x11    // initializes ? value=0 (appears as first thing todo on open)
 108 #define IPW_SIO_PURGE           0x12    // purge all transmissions?, call with value=numchar_to_purge
 109 #define IPW_SIO_HANDFLOW        0x13    // set xon/xoff limits value=0, and a buffer of 0x10 bytes
 110 #define IPW_SIO_SETCHARS        0x13    // set the flowcontrol special chars, value=0, buf=6 bytes,
 111                                         // last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
 112
 113 /* values used for request IPW_SIO_SET_PIN */
 114 #define IPW_PIN_SETDTR          0x101
 115 #define IPW_PIN_SETRTS          0x202
 116 #define IPW_PIN_CLRDTR          0x100
 117 #define IPW_PIN_CLRRTS          0x200 // unconfirmed
 118
 119 /* values used for request IPW_SIO_RXCTL */
 120 #define IPW_RXBULK_ON           1
 121 #define IPW_RXBULK_OFF          0
 122
 123 /* various 16 byte hardcoded transferbuffers used by flow control */
 124 #define IPW_BYTES_FLOWINIT      { 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
 125
 126 /* Interpretation of modem status lines */
 127 /* These need sorting out by individually connecting pins and checking
 128  * results. FIXME!
 129  * When data is being sent we see 0x30 in the lower byte; this must
 130  * contain DSR and CTS ...
 131  */
 132 #define IPW_DSR                 ((1<<4) | (1<<5))
 133 #define IPW_CTS                 ((1<<5) | (1<<4))
 134
 135 #define IPW_WANTS_TO_SEND       0x30
 136 //#define IPW_DTR                       /* Data Terminal Ready */
 137 //#define IPW_CTS                       /* Clear To Send */
 138 //#define IPW_CD                        /* Carrier Detect */
 139 //#define IPW_DSR                       /* Data Set Ready */
 140 //#define IPW_RxD                       /* Receive pin */
 141
 142 //#define IPW_LE
 143 //#define IPW_RTS
 144 //#define IPW_ST
 145 //#define IPW_SR
 146 //#define IPW_RI                        /* Ring Indicator */
 147
 148 static struct usb_device_id usb_ipw_ids[] = {
 149         { USB_DEVICE(IPW_VID, IPW_PID) },
 150         { },
 151 };
 152
 153 MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
 154
 155 static struct usb_driver usb_ipw_driver = {
 156         .owner =        THIS_MODULE,
 157         .name =         "ipwtty",
 158         .probe =        usb_serial_probe,
 159         .disconnect =   usb_serial_disconnect,
 160         .id_table =     usb_ipw_ids,
 161 };
 162
 163 static int debug;
 164
 165 static void ipw_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 166 {
 167         struct usb_serial_port *port = urb->context;
 168         unsigned char *data = urb->transfer_buffer;
 169         struct tty_struct *tty;
 170         int i;
 171         int result;
 172
 173         dbg("%s - port %d", __FUNCTION__, port->number);
 174
 175         if (urb->status) {
 176                 dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
 177                 return;
 178         }
 179
 180         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
 181
 182         tty = port->tty;
 183         if (tty && urb->actual_length) {
 184                 for (i = 0; i < urb->actual_length ; ++i) {
 185                         /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
 186                         if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
 187                                 tty_flip_buffer_push(tty);
 188                         }
 189                         /* this doesn't actually push the data through unless tty->low_latency is set */
 190                         tty_insert_flip_char(tty, data[i], 0);
 191                 }
 192                 tty_flip_buffer_push(tty);
 193         }
 194
 195         /* Continue trying to always read  */
 196         usb_fill_bulk_urb (port->read_urb, port->serial->dev,
 197                            usb_rcvbulkpipe(port->serial->dev,
 198                                            port->bulk_in_endpointAddress),
 199                            port->read_urb->transfer_buffer,
 200                            port->read_urb->transfer_buffer_length,
 201                            ipw_read_bulk_callback, port);
 202         result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 203         if (result)
 204                 dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
 205         return;
 206 }
 207
 208 static int ipw_open(struct usb_serial_port *port, struct file *filp)
 209 {
 210         struct usb_device *dev = port->serial->dev;
 211         u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
 212         u8 *buf_flow_init;
 213         int result;
 214
 215         dbg("%s", __FUNCTION__);
 216
 217         buf_flow_init = kmalloc(16, GFP_KERNEL);
 218         if (!buf_flow_init)
 219                 return -ENOMEM;
 220         memcpy(buf_flow_init, buf_flow_static, 16);
 221
 222         if (port->tty)
 223                 port->tty->low_latency = 1;
 224
 225         /* --1: Tell the modem to initialize (we think) From sniffs this is always the
 226          * first thing that gets sent to the modem during opening of the device */
 227         dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
 228         result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
 229                                  IPW_SIO_INIT,
 230                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 231                                  0,
 232                                  0, /* index */
 233                                  NULL,
 234                                  0,
 235                                  100000);
 236         if (result < 0)
 237                 dev_err(&port->dev, "Init of modem failed (error = %d)", result);
 238
 239         /* reset the bulk pipes */
 240         usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
 241         usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
 242
 243         /*--2: Start reading from the device */
 244         dbg("%s: setting up bulk read callback",__FUNCTION__);
 245         usb_fill_bulk_urb(port->read_urb, dev,
 246                           usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
 247                           port->bulk_in_buffer,
 248                           port->bulk_in_size,
 249                           ipw_read_bulk_callback, port);
 250         result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 251         if (result < 0)
 252                 dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
 253
 254         /*--3: Tell the modem to open the floodgates on the rx bulk channel */
 255         dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
 256         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 257                                  IPW_SIO_RXCTL,
 258                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 259                                  IPW_RXBULK_ON,
 260                                  0, /* index */
 261                                  NULL,
 262                                  0,
 263                                  100000);
 264         if (result < 0)
 265                 dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
 266
 267         /*--4: setup the initial flowcontrol */
 268         dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
 269         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 270                                  IPW_SIO_HANDFLOW,
 271                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 272                                  0,
 273                                  0,
 274                                  buf_flow_init,
 275                                  0x10,
 276                                  200000);
 277         if (result < 0)
 278                 dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
 279
 280
 281         /*--5: raise the dtr */
 282         dbg("%s:raising dtr",__FUNCTION__);
 283         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 284                                  IPW_SIO_SET_PIN,
 285                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 286                                  IPW_PIN_SETDTR,
 287                                  0,
 288                                  NULL,
 289                                  0,
 290                                  200000);
 291         if (result < 0)
 292                 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
 293
 294         /*--6: raise the rts */
 295         dbg("%s:raising rts",__FUNCTION__);
 296         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 297                                  IPW_SIO_SET_PIN,
 298                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 299                                  IPW_PIN_SETRTS,
 300                                  0,
 301                                  NULL,
 302                                  0,
 303                                  200000);
 304         if (result < 0)
 305                 dev_err(&port->dev, "setting dtr failed (error = %d)", result);
 306
 307         kfree(buf_flow_init);
 308         return 0;
 309 }
 310
 311 static void ipw_close(struct usb_serial_port *port, struct file * filp)
 312 {
 313         struct usb_device *dev = port->serial->dev;
 314         int result;
 315
 316         if (tty_hung_up_p(filp)) {
 317                 dbg("%s: tty_hung_up_p ...", __FUNCTION__);
 318                 return;
 319         }
 320
 321         /*--1: drop the dtr */
 322         dbg("%s:dropping dtr",__FUNCTION__);
 323         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 324                                  IPW_SIO_SET_PIN,
 325                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 326                                  IPW_PIN_CLRDTR,
 327                                  0,
 328                                  NULL,
 329                                  0,
 330                                  200000);
 331         if (result < 0)
 332                 dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
 333
 334         /*--2: drop the rts */
 335         dbg("%s:dropping rts",__FUNCTION__);
 336         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 337                                  IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 338                                  IPW_PIN_CLRRTS,
 339                                  0,
 340                                  NULL,
 341                                  0,
 342                                  200000);
 343         if (result < 0)
 344                 dev_err(&port->dev, "dropping rts failed (error = %d)", result);
 345
 346
 347         /*--3: purge */
 348         dbg("%s:sending purge",__FUNCTION__);
 349         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 350                                  IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 351                                  0x03,
 352                                  0,
 353                                  NULL,
 354                                  0,
 355                                  200000);
 356         if (result < 0)
 357                 dev_err(&port->dev, "purge failed (error = %d)", result);
 358
 359
 360         /* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
 361         result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 362                                  IPW_SIO_RXCTL,
 363                                  USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
 364                                  IPW_RXBULK_OFF,
 365                                  0, /* index */
 366                                  NULL,
 367                                  0,
 368                                  100000);
 369
 370         if (result < 0)
 371                 dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
 372
 373         /* shutdown any in-flight urbs that we know about */
 374         usb_kill_urb(port->read_urb);
 375         usb_kill_urb(port->write_urb);
 376 }
 377
 378 static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 379 {
 380         struct usb_serial_port *port = urb->context;
 381
 382         dbg("%s", __FUNCTION__);
 383
 384         if (urb->status)
 385                 dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
 386
 387         schedule_work(&port->work);
 388 }
 389
 390 static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 391 {
 392         struct usb_device *dev = port->serial->dev;
 393         int ret;
 394
 395         dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
 396                 count, in_interrupt() );
 397
 398         if (count == 0) {
 399                 dbg("%s - write request of 0 bytes", __FUNCTION__);
 400                 return 0;
 401         }
 402
 403         /* Racy and broken, FIXME properly! */
 404         if (port->write_urb->status == -EINPROGRESS)
 405                 return 0;
 406
 407         count = min(count, port->bulk_out_size);
 408         memcpy(port->bulk_out_buffer, buf, count);
 409
 410         dbg("%s count now:%d", __FUNCTION__, count);
 411
 412         usb_fill_bulk_urb(port->write_urb, dev,
 413                           usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
 414                           port->write_urb->transfer_buffer,
 415                           count,
 416                           ipw_write_bulk_callback,
 417                           port);
 418
 419         ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 420         if (ret != 0) {
 421                 dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
 422                 return ret;
 423         }
 424
 425         dbg("%s returning %d", __FUNCTION__, count);
 426         return count;
 427 }
 428
 429 static int ipw_probe(struct usb_serial_port *port)
 430 {
 431         return 0;
 432 }
 433
 434 static int ipw_disconnect(struct usb_serial_port *port)
 435 {
 436         usb_set_serial_port_data(port, NULL);
 437         return 0;
 438 }
 439
 440 static struct usb_serial_device_type ipw_device = {
 441         .owner =                THIS_MODULE,
 442         .name =                 "IPWireless converter",
 443         .short_name =           "ipw",
 444         .id_table =             usb_ipw_ids,
 445         .num_interrupt_in =     NUM_DONT_CARE,
 446         .num_bulk_in =          1,
 447         .num_bulk_out =         1,
 448         .num_ports =            1,
 449         .open =                 ipw_open,
 450         .close =                ipw_close,
 451         .port_probe =           ipw_probe,
 452         .port_remove =          ipw_disconnect,
 453         .write =                ipw_write,
 454         .write_bulk_callback =  ipw_write_bulk_callback,
 455         .read_bulk_callback =   ipw_read_bulk_callback,
 456 };
 457
 458
 459
 460 static int usb_ipw_init(void)
 461 {
 462         int retval;
 463
 464         retval = usb_serial_register(&ipw_device);
 465         if (retval)
 466                 return retval;
 467         retval = usb_register(&usb_ipw_driver);
 468         if (retval) {
 469                 usb_serial_deregister(&ipw_device);
 470                 return retval;
 471         }
 472         info(DRIVER_DESC " " DRIVER_VERSION);
 473         return 0;
 474 }
 475
 476 static void usb_ipw_exit(void)
 477 {
 478         usb_deregister(&usb_ipw_driver);
 479         usb_serial_deregister(&ipw_device);
 480 }
 481
 482 module_init(usb_ipw_init);
 483 module_exit(usb_ipw_exit);
 484
 485 /* Module information */
 486 MODULE_AUTHOR( DRIVER_AUTHOR );
 487 MODULE_DESCRIPTION( DRIVER_DESC );
 488 MODULE_LICENSE("GPL");
 489
 490 module_param(debug, bool, S_IRUGO | S_IWUSR);
 491 MODULE_PARM_DESC(debug, "Debug enabled or not");