2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
6 * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved.
11 * This file contains a module version of the ioc4 serial driver. This
12 * includes all the support functions needed (support functions, etc.)
13 * and the serial driver itself.
15 #include <linux/errno.h>
16 #include <linux/tty.h>
17 #include <linux/serial.h>
18 #include <linux/serialP.h>
19 #include <linux/circ_buf.h>
20 #include <linux/serial_reg.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/ioc4_common.h>
24 #include <linux/serial_core.h>
27 * interesting things about the ioc4
30 #define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
31 #define IOC4_NUM_CARDS 8 /* max cards per partition */
33 #define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
34 (_n == 1) ? (IOC4_SIO_IR_S1) : \
35 (_n == 2) ? (IOC4_SIO_IR_S2) : \
38 #define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
39 (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
40 (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
41 (IOC4_OTHER_IR_S3_MEMERR)
45 * All IOC4 registers are 32 bits wide.
49 * PCI Memory Space Map
51 #define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
52 #define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
53 #define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
54 #define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
55 #define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
56 #define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
57 #define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
60 #define IOC4_SIO_INTR_TYPE 0
61 #define IOC4_OTHER_INTR_TYPE 1
62 #define IOC4_NUM_INTR_TYPES 2
64 /* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
65 #define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
66 #define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
67 #define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
68 #define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
69 #define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
70 #define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
71 #define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
72 #define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
73 #define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
74 #define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
75 #define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
76 #define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
77 #define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
78 #define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
79 #define IOC4_SIO_IR_S1_INT 0x00004000 /* */
80 #define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
81 #define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
82 #define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
83 #define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
84 #define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
85 #define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
86 #define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
87 #define IOC4_SIO_IR_S2_INT 0x00400000 /* */
88 #define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
89 #define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
90 #define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
91 #define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
92 #define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
93 #define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
94 #define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
95 #define IOC4_SIO_IR_S3_INT 0x40000000 /* */
96 #define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
98 /* Per device interrupt masks */
99 #define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
100 IOC4_SIO_IR_S0_RX_FULL | \
101 IOC4_SIO_IR_S0_RX_HIGH | \
102 IOC4_SIO_IR_S0_RX_TIMER | \
103 IOC4_SIO_IR_S0_DELTA_DCD | \
104 IOC4_SIO_IR_S0_DELTA_CTS | \
105 IOC4_SIO_IR_S0_INT | \
106 IOC4_SIO_IR_S0_TX_EXPLICIT)
107 #define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
108 IOC4_SIO_IR_S1_RX_FULL | \
109 IOC4_SIO_IR_S1_RX_HIGH | \
110 IOC4_SIO_IR_S1_RX_TIMER | \
111 IOC4_SIO_IR_S1_DELTA_DCD | \
112 IOC4_SIO_IR_S1_DELTA_CTS | \
113 IOC4_SIO_IR_S1_INT | \
114 IOC4_SIO_IR_S1_TX_EXPLICIT)
115 #define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
116 IOC4_SIO_IR_S2_RX_FULL | \
117 IOC4_SIO_IR_S2_RX_HIGH | \
118 IOC4_SIO_IR_S2_RX_TIMER | \
119 IOC4_SIO_IR_S2_DELTA_DCD | \
120 IOC4_SIO_IR_S2_DELTA_CTS | \
121 IOC4_SIO_IR_S2_INT | \
122 IOC4_SIO_IR_S2_TX_EXPLICIT)
123 #define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
124 IOC4_SIO_IR_S3_RX_FULL | \
125 IOC4_SIO_IR_S3_RX_HIGH | \
126 IOC4_SIO_IR_S3_RX_TIMER | \
127 IOC4_SIO_IR_S3_DELTA_DCD | \
128 IOC4_SIO_IR_S3_DELTA_CTS | \
129 IOC4_SIO_IR_S3_INT | \
130 IOC4_SIO_IR_S3_TX_EXPLICIT)
132 /* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
133 #define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
134 #define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
135 #define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
136 #define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
137 #define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
138 #define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
140 /* Bitmasks for IOC4_SIO_CR */
141 #define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
142 #define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
143 #define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
144 #define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
145 #define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
146 #define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
147 #define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
148 #define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
149 #define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
150 #define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
152 /* Defs for some of the generic I/O pins */
153 #define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
155 #define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
157 #define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
159 #define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
162 #define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
163 uart 0 mode select */
164 #define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
165 uart 1 mode select */
166 #define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
167 uart 2 mode select */
168 #define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
169 uart 3 mode select */
171 /* Bitmasks for serial RX status byte */
172 #define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
173 #define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
174 #define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
175 #define IOC4_RXSB_BREAK 0x08 /* Break character */
176 #define IOC4_RXSB_CTS 0x10 /* State of CTS */
177 #define IOC4_RXSB_DCD 0x20 /* State of DCD */
178 #define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
179 #define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
182 /* Bitmasks for serial TX control byte */
183 #define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
184 #define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
185 #define IOC4_TXCB_VALID 0x40 /* Byte is valid */
186 #define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
187 #define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
189 /* Bitmasks for IOC4_SBBR_L */
190 #define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
192 /* Bitmasks for IOC4_SSCR_<3:0> */
193 #define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
194 #define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
195 #define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
196 #define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
197 #define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
198 #define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
199 #define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
200 #define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
201 #define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
202 #define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
203 #define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
205 /* All producer/comsumer pointers are the same bitfield */
206 #define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
207 #define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
208 #define IOC4_PROD_CONS_PTR_OFF 3
210 /* Bitmasks for IOC4_SRCIR_<3:0> */
211 #define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
213 /* Bitmasks for IOC4_SHADOW_<3:0> */
214 #define IOC4_SHADOW_DR 0x00000001 /* Data ready */
215 #define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
216 #define IOC4_SHADOW_PE 0x00000004 /* Parity error */
217 #define IOC4_SHADOW_FE 0x00000008 /* Framing error */
218 #define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
219 #define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
220 #define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
221 #define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
222 #define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
223 #define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
224 #define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
225 #define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
226 #define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
227 #define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
228 #define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
229 #define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
230 #define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
232 /* Bitmasks for IOC4_SRTR_<3:0> */
233 #define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
234 #define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
235 #define IOC4_SRTR_CNT_VAL_SHIFT 16
236 #define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
238 /* Serial port register map used for DMA and PIO serial I/O */
239 struct ioc4_serialregs {
249 /* IOC4 UART register map */
250 struct ioc4_uartregs {
253 char iir; /* read only */
254 char fcr; /* write only */
257 char ier; /* DLAB == 0 */
258 char dlm; /* DLAB == 1 */
261 char rbr; /* read only, DLAB == 0 */
262 char thr; /* write only, DLAB == 0 */
263 char dll; /* DLAB == 1 */
272 #define i4u_dll u1.dll
273 #define i4u_ier u2.ier
274 #define i4u_dlm u2.dlm
275 #define i4u_fcr u3.fcr
277 /* PCI memory space register map addressed using pci_bar0 */
278 struct ioc4_memregs {
280 /* Miscellaneous IOC4 registers */
281 uint32_t pci_err_addr_l;
282 uint32_t pci_err_addr_h;
286 /* These registers are read-only for general kernel code. */
288 uint32_t other_ies_ro;
290 uint32_t other_iec_ro;
309 char misc_fill4[0x100 - 0x5C - 4];
311 /* ATA/ATAP registers */
312 uint32_t ata_notused[9];
313 char ata_fill1[0x140 - 0x120 - 4];
314 uint32_t ata_notused1[8];
315 char ata_fill2[0x200 - 0x15C - 4];
317 /* Keyboard and mouse registers */
318 uint32_t km_notused[5];;
319 char km_fill1[0x300 - 0x210 - 4];
321 /* Serial port registers used for DMA serial I/O */
328 struct ioc4_serialregs port_0;
329 struct ioc4_serialregs port_1;
330 struct ioc4_serialregs port_2;
331 struct ioc4_serialregs port_3;
332 struct ioc4_uartregs uart_0;
333 struct ioc4_uartregs uart_1;
334 struct ioc4_uartregs uart_2;
335 struct ioc4_uartregs uart_3;
339 /* UART clock speed */
340 #define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66
341 #define IOC4_SER_XIN_CLK_66 66666667
342 #define IOC4_SER_XIN_CLK_33 33333333
347 typedef void ioc4_intr_func_f(void *, uint32_t);
348 typedef ioc4_intr_func_f *ioc4_intr_func_t;
350 /* defining this will get you LOTS of great debug info */
351 //#define DEBUG_INTERRUPTS
352 #define DPRINT_CONFIG(_x...) ;
353 //#define DPRINT_CONFIG(_x...) printk _x
355 /* number of characters left in xmit buffer before we ask for more */
356 #define WAKEUP_CHARS 256
358 /* number of characters we want to transmit to the lower level at a time */
359 #define IOC4_MAX_CHARS 128
361 /* Device name we're using */
362 #define DEVICE_NAME "ttyIOC"
363 #define DEVICE_MAJOR 204
364 #define DEVICE_MINOR 50
366 /* register offsets */
367 #define IOC4_SERIAL_OFFSET 0x300
369 /* flags for next_char_state */
370 #define NCS_BREAK 0x1
371 #define NCS_PARITY 0x2
372 #define NCS_FRAMING 0x4
373 #define NCS_OVERRUN 0x8
375 /* cause we need SOME parameters ... */
376 #define MIN_BAUD_SUPPORTED 1200
377 #define MAX_BAUD_SUPPORTED 115200
379 /* protocol types supported */
385 /* Notification types */
386 #define N_DATA_READY 0x01
387 #define N_OUTPUT_LOWAT 0x02
389 #define N_PARITY_ERROR 0x08
390 #define N_FRAMING_ERROR 0x10
391 #define N_OVERRUN_ERROR 0x20
395 #define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
396 N_PARITY_ERROR | N_FRAMING_ERROR | \
397 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
399 #define N_ALL_OUTPUT N_OUTPUT_LOWAT
401 #define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
403 #define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
404 N_PARITY_ERROR | N_FRAMING_ERROR | \
405 N_OVERRUN_ERROR | N_DDCD | N_DCTS)
407 #define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
408 #define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
411 #define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
412 | UART_LCR_WLEN7 | UART_LCR_WLEN8)
413 #define LCR_MASK_STOP_BITS (UART_LCR_STOP)
415 #define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb)
416 #define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir)
418 /* Default to 4k buffers */
419 #ifdef IOC4_1K_BUFFERS
420 #define RING_BUF_SIZE 1024
421 #define IOC4_BUF_SIZE_BIT 0
422 #define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
424 #define RING_BUF_SIZE 4096
425 #define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
426 #define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
429 #define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
432 * This is the entry saved by the driver - one per card
434 struct ioc4_control {
437 /* uart ports are allocated here */
438 struct uart_port icp_uart_port;
439 /* Handy reference material */
440 struct ioc4_port *icp_port;
441 } ic_port[IOC4_NUM_SERIAL_PORTS];
442 struct ioc4_soft *ic_soft;
446 * per-IOC4 data structure
448 #define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
450 struct ioc4_mem __iomem *is_ioc4_mem_addr;
451 struct ioc4_serial __iomem *is_ioc4_serial_addr;
453 /* Each interrupt type has an entry in the array */
454 struct ioc4_intr_type {
457 * Each in-use entry in this array contains at least
458 * one nonzero bit in sd_bits; no two entries in this
459 * array have overlapping sd_bits values.
461 struct ioc4_intr_info {
463 ioc4_intr_func_f *sd_intr;
465 } is_intr_info[MAX_IOC4_INTR_ENTS];
467 /* Number of entries active in the above array */
468 atomic_t is_num_intrs;
469 } is_intr_type[IOC4_NUM_INTR_TYPES];
471 /* is_ir_lock must be held while
472 * modifying sio_ie values, so
473 * we can be sure that sio_ie is
474 * not changing when we read it
477 spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
480 /* Local port info for each IOC4 serial ports */
482 struct uart_port *ip_port;
483 /* Back ptrs for this port */
484 struct ioc4_control *ip_control;
485 struct pci_dev *ip_pdev;
486 struct ioc4_soft *ip_ioc4_soft;
488 /* pci mem addresses */
489 struct ioc4_mem __iomem *ip_mem;
490 struct ioc4_serial __iomem *ip_serial;
491 struct ioc4_serialregs __iomem *ip_serial_regs;
492 struct ioc4_uartregs __iomem *ip_uart_regs;
494 /* Ring buffer page for this port */
495 dma_addr_t ip_dma_ringbuf;
496 /* vaddr of ring buffer */
497 struct ring_buffer *ip_cpu_ringbuf;
499 /* Rings for this port */
500 struct ring *ip_inring;
501 struct ring *ip_outring;
503 /* Hook to port specific values */
504 struct hooks *ip_hooks;
508 /* Various rx/tx parameters */
513 /* Copy of notification bits */
516 /* Shadow copies of various registers so we don't need to PIO
517 * read them constantly
519 uint32_t ip_ienb; /* Enabled interrupts */
523 int ip_pci_bus_speed;
524 unsigned char ip_flags;
527 /* tx low water mark. We need to notify the driver whenever tx is getting
528 * close to empty so it can refill the tx buffer and keep things going.
529 * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
530 * have no trouble getting in more chars in time (I certainly hope so).
532 #define TX_LOWAT_LATENCY 1000
533 #define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
534 #define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
537 #define INPUT_HIGH 0x01
539 #define LOWAT_WRITTEN 0x04
540 #define READ_ABORTED 0x08
542 /* Since each port has different register offsets and bitmasks
543 * for everything, we'll store those that we need in tables so we
544 * don't have to be constantly checking the port we are dealing with.
547 uint32_t intr_delta_dcd;
548 uint32_t intr_delta_cts;
550 uint32_t intr_rx_timer;
551 uint32_t intr_rx_high;
552 uint32_t intr_tx_explicit;
553 uint32_t intr_dma_error;
556 char rs422_select_pin;
559 static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
560 /* Values for port 0 */
562 IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
563 IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
564 IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
565 IOC4_OTHER_IR_S0_MEMERR,
566 (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
567 IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
568 IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
569 IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
570 IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
573 /* Values for port 1 */
575 IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
576 IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
577 IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
578 IOC4_OTHER_IR_S1_MEMERR,
579 (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
580 IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
581 IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
582 IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
583 IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
586 /* Values for port 2 */
588 IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
589 IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
590 IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
591 IOC4_OTHER_IR_S2_MEMERR,
592 (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
593 IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
594 IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
595 IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
596 IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
599 /* Values for port 3 */
601 IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
602 IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
603 IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
604 IOC4_OTHER_IR_S3_MEMERR,
605 (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
606 IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
607 IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
608 IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
609 IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
613 /* A ring buffer entry */
621 char data[4]; /* data bytes */
622 char sc[4]; /* status/control */
627 /* Test the valid bits in any of the 4 sc chars using "allsc" member */
628 #define RING_ANY_VALID \
629 ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
631 #define ring_sc u.s.sc
632 #define ring_data u.s.data
633 #define ring_allsc u.all.allsc
635 /* Number of entries per ring buffer. */
636 #define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
638 /* An individual ring */
640 struct ring_entry entries[ENTRIES_PER_RING];
643 /* The whole enchilada */
645 struct ring TX_0_OR_2;
646 struct ring RX_0_OR_2;
647 struct ring TX_1_OR_3;
648 struct ring RX_1_OR_3;
651 /* Get a ring from a port struct */
652 #define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
654 /* Infinite loop detection.
656 #define MAXITER 10000000
659 static void receive_chars(struct uart_port *);
660 static void handle_intr(void *arg, uint32_t sio_ir);
663 * write_ireg - write the interrupt regs
664 * @ioc4_soft: ptr to soft struct for this port
665 * @val: value to write
666 * @which: which register
667 * @type: which ireg set
670 write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
672 struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr;
675 spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
678 case IOC4_SIO_INTR_TYPE:
681 writel(val, &mem->sio_ies_ro);
685 writel(val, &mem->sio_iec_ro);
690 case IOC4_OTHER_INTR_TYPE:
693 writel(val, &mem->other_ies_ro);
697 writel(val, &mem->other_iec_ro);
705 spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
709 * set_baud - Baud rate setting code
711 * @baud: baud rate to use
713 static int set_baud(struct ioc4_port *port, int baud)
718 unsigned short divisor;
719 struct ioc4_uartregs __iomem *uart;
721 divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
724 actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
726 diff = actual_baud - baud;
730 /* If we're within 1%, we've found a match */
731 if (diff * 100 > actual_baud)
734 uart = port->ip_uart_regs;
735 lcr = readb(&uart->i4u_lcr);
736 writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
737 writeb((unsigned char)divisor, &uart->i4u_dll);
738 writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
739 writeb(lcr, &uart->i4u_lcr);
745 * get_ioc4_port - given a uart port, return the control structure
748 static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
750 struct ioc4_control *control = dev_get_drvdata(the_port->dev);
754 for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) {
755 if (!control->ic_port[ii].icp_port)
757 if (the_port == control->ic_port[ii].icp_port->ip_port)
758 return control->ic_port[ii].icp_port;
764 /* The IOC4 hardware provides no atomic way to determine if interrupts
765 * are pending since two reads are required to do so. The handler must
766 * read the SIO_IR and the SIO_IES, and take the logical and of the
767 * two. When this value is zero, all interrupts have been serviced and
768 * the handler may return.
770 * This has the unfortunate "hole" that, if some other CPU or
771 * some other thread or some higher level interrupt manages to
772 * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
773 * think we have observed SIO_IR&SIO_IE==0 when in fact this
774 * condition never really occurred.
776 * To solve this, we use a simple spinlock that must be held
777 * whenever modifying SIO_IE; holding this lock while observing
778 * both SIO_IR and SIO_IE guarantees that we do not falsely
779 * conclude that no enabled interrupts are pending.
782 static inline uint32_t
783 pending_intrs(struct ioc4_soft *soft, int type)
785 struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
789 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
790 || (type == IOC4_OTHER_INTR_TYPE)));
792 spin_lock_irqsave(&soft->is_ir_lock, flag);
795 case IOC4_SIO_INTR_TYPE:
796 intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro);
799 case IOC4_OTHER_INTR_TYPE:
800 intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro);
802 /* Don't process any ATA interrupte */
803 intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
809 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
814 * port_init - Initialize the sio and ioc4 hardware for a given port
815 * called per port from attach...
816 * @port: port to initialize
818 static int inline port_init(struct ioc4_port *port)
821 struct hooks *hooks = port->ip_hooks;
822 struct ioc4_uartregs __iomem *uart;
824 /* Idle the IOC4 serial interface */
825 writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
827 /* Wait until any pending bus activity for this port has ceased */
829 sio_cr = readl(&port->ip_mem->sio_cr);
830 while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
832 /* Finish reset sequence */
833 writel(0, &port->ip_serial_regs->sscr);
835 /* Once RESET is done, reload cached tx_prod and rx_cons values
836 * and set rings to empty by making prod == cons
838 port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
839 writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
840 port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
841 writel(port->ip_rx_cons, &port->ip_serial_regs->srcir);
843 /* Disable interrupts for this 16550 */
844 uart = port->ip_uart_regs;
845 writeb(0, &uart->i4u_lcr);
846 writeb(0, &uart->i4u_ier);
848 /* Set the default baud */
849 set_baud(port, port->ip_baud);
851 /* Set line control to 8 bits no parity */
852 writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
853 /* UART_LCR_STOP == 1 stop */
855 /* Enable the FIFOs */
856 writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
857 /* then reset 16550 FIFOs */
858 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
861 /* Clear modem control register */
862 writeb(0, &uart->i4u_mcr);
864 /* Clear deltas in modem status register */
865 readb(&uart->i4u_msr);
867 /* Only do this once per port pair */
868 if (port->ip_hooks == &hooks_array[0]
869 || port->ip_hooks == &hooks_array[2]) {
870 unsigned long ring_pci_addr;
871 uint32_t __iomem *sbbr_l;
872 uint32_t __iomem *sbbr_h;
874 if (port->ip_hooks == &hooks_array[0]) {
875 sbbr_l = &port->ip_serial->sbbr01_l;
876 sbbr_h = &port->ip_serial->sbbr01_h;
878 sbbr_l = &port->ip_serial->sbbr23_l;
879 sbbr_h = &port->ip_serial->sbbr23_h;
882 ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
883 DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
884 __FUNCTION__, ring_pci_addr));
886 writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
887 writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
890 /* Set the receive timeout value to 10 msec */
891 writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
893 /* Set rx threshold, enable DMA */
894 /* Set high water mark at 3/4 of full ring */
895 port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
896 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
898 /* Disable and clear all serial related interrupt bits */
899 write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
900 IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
901 port->ip_ienb &= ~hooks->intr_clear;
902 writel(hooks->intr_clear, &port->ip_mem->sio_ir);
907 * handle_dma_error_intr - service any pending DMA error interrupts for the
908 * given port - 2nd level called via sd_intr
910 * @other_ir: ioc4regs
912 static void handle_dma_error_intr(void *arg, uint32_t other_ir)
914 struct ioc4_port *port = (struct ioc4_port *)arg;
915 struct hooks *hooks = port->ip_hooks;
918 spin_lock_irqsave(&port->ip_lock, flags);
920 /* ACK the interrupt */
921 writel(hooks->intr_dma_error, &port->ip_mem->other_ir);
923 if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) {
925 "PCI error address is 0x%lx, "
926 "master is serial port %c %s\n",
927 (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
929 | readl(&port->ip_mem->pci_err_addr_l))
930 & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
931 ((char)(readl(&port->ip_mem-> pci_err_addr_l) &
932 IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
933 (readl(&port->ip_mem->pci_err_addr_l)
934 & IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
937 if (readl(&port->ip_mem->pci_err_addr_l)
938 & IOC4_PCI_ERR_ADDR_MUL_ERR) {
940 "Multiple errors occurred\n");
943 spin_unlock_irqrestore(&port->ip_lock, flags);
945 /* Re-enable DMA error interrupts */
946 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
947 IOC4_OTHER_INTR_TYPE);
951 * intr_connect - interrupt connect function
952 * @soft: soft struct for this card
953 * @type: interrupt type
954 * @intrbits: bit pattern to set
955 * @intr: handler function
959 intr_connect(struct ioc4_soft *soft, int type,
960 uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
963 struct ioc4_intr_info *intr_ptr;
965 BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
966 || (type == IOC4_OTHER_INTR_TYPE)));
968 i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
969 BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
971 /* Save off the lower level interrupt handler */
972 intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
973 intr_ptr->sd_bits = intrbits;
974 intr_ptr->sd_intr = intr;
975 intr_ptr->sd_info = info;
979 * ioc4_intr - Top level IOC4 interrupt handler.
984 static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
986 struct ioc4_soft *soft;
987 uint32_t this_ir, this_mir;
988 int xx, num_intrs = 0;
991 struct ioc4_intr_info *ii;
994 for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
995 num_intrs = (int)atomic_read(
996 &soft->is_intr_type[intr_type].is_num_intrs);
998 this_mir = this_ir = pending_intrs(soft, intr_type);
1000 /* Farm out the interrupt to the various drivers depending on
1001 * which interrupt bits are set.
1003 for (xx = 0; xx < num_intrs; xx++) {
1004 ii = &soft->is_intr_type[intr_type].is_intr_info[xx];
1005 if ((this_mir = this_ir & ii->sd_bits)) {
1006 /* Disable owned interrupts, call handler */
1008 write_ireg(soft, ii->sd_bits, IOC4_W_IEC,
1010 ii->sd_intr(ii->sd_info, this_mir);
1011 this_ir &= ~this_mir;
1016 "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x,"
1017 " sio_ies = 0x%x, other_ir = 0x%x :"
1018 "other_ies = 0x%x\n",
1019 (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" :
1021 readl(&soft->is_ioc4_mem_addr->sio_ir),
1022 readl(&soft->is_ioc4_mem_addr->sio_ies_ro),
1023 readl(&soft->is_ioc4_mem_addr->other_ir),
1024 readl(&soft->is_ioc4_mem_addr->other_ies_ro));
1027 #ifdef DEBUG_INTERRUPTS
1029 struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
1030 spinlock_t *lp = &soft->is_ir_lock;
1033 spin_lock_irqsave(&soft->is_ir_lock, flag);
1034 printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x "
1035 "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n",
1036 __FUNCTION__, __LINE__,
1037 (void *)mem, readl(&mem->sio_ir),
1038 readl(&mem->sio_ies_ro),
1039 readl(&mem->other_ir),
1040 readl(&mem->other_ies_ro),
1041 IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
1042 spin_unlock_irqrestore(&soft->is_ir_lock, flag);
1045 return handled ? IRQ_HANDLED : IRQ_NONE;
1049 * ioc4_attach_local - Device initialization.
1050 * Called at *_attach() time for each
1051 * IOC4 with serial ports in the system.
1052 * @control: ioc4_control ptr
1053 * @pdev: PCI handle for this device
1054 * @soft: soft struct for this device
1055 * @ioc4: ioc4 mem space
1057 static int inline ioc4_attach_local(struct pci_dev *pdev,
1058 struct ioc4_control *control,
1059 struct ioc4_soft *soft, void __iomem *ioc4_mem,
1060 void __iomem *ioc4_serial)
1062 struct ioc4_port *port;
1063 struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
1065 uint16_t ioc4_revid_min = 62;
1066 uint16_t ioc4_revid;
1068 /* IOC4 firmware must be at least rev 62 */
1069 pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
1071 printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
1072 if (ioc4_revid < ioc4_revid_min) {
1074 "IOC4 serial not supported on firmware rev %d, "
1075 "please upgrade to rev %d or higher\n",
1076 ioc4_revid, ioc4_revid_min);
1079 BUG_ON(ioc4_mem == NULL);
1080 BUG_ON(ioc4_serial == NULL);
1082 /* Create port structures for each port */
1083 for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
1085 port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL);
1088 "IOC4 serial memory not available for port\n");
1091 memset(port, 0, sizeof(struct ioc4_port));
1093 /* we need to remember the previous ones, to point back to
1094 * them farther down - setting up the ring buffers.
1096 ports[port_number] = port;
1098 /* Allocate buffers and jumpstart the hardware. */
1099 control->ic_port[port_number].icp_port = port;
1100 port->ip_ioc4_soft = soft;
1101 port->ip_pdev = pdev;
1103 port->ip_pci_bus_speed = IOC4_SER_XIN_CLK;
1104 port->ip_baud = 9600;
1105 port->ip_control = control;
1106 port->ip_mem = ioc4_mem;
1107 port->ip_serial = ioc4_serial;
1109 /* point to the right hook */
1110 port->ip_hooks = &hooks_array[port_number];
1112 /* Get direct hooks to the serial regs and uart regs
1115 switch (port_number) {
1117 port->ip_serial_regs = &(port->ip_serial->port_0);
1118 port->ip_uart_regs = &(port->ip_serial->uart_0);
1121 port->ip_serial_regs = &(port->ip_serial->port_1);
1122 port->ip_uart_regs = &(port->ip_serial->uart_1);
1125 port->ip_serial_regs = &(port->ip_serial->port_2);
1126 port->ip_uart_regs = &(port->ip_serial->uart_2);
1130 port->ip_serial_regs = &(port->ip_serial->port_3);
1131 port->ip_uart_regs = &(port->ip_serial->uart_3);
1135 /* ring buffers are 1 to a pair of ports */
1136 if (port_number && (port_number & 1)) {
1137 /* odd use the evens buffer */
1138 port->ip_dma_ringbuf =
1139 ports[port_number - 1]->ip_dma_ringbuf;
1140 port->ip_cpu_ringbuf =
1141 ports[port_number - 1]->ip_cpu_ringbuf;
1142 port->ip_inring = RING(port, RX_1_OR_3);
1143 port->ip_outring = RING(port, TX_1_OR_3);
1146 if (port->ip_dma_ringbuf == 0) {
1147 port->ip_cpu_ringbuf = pci_alloc_consistent
1148 (pdev, TOTAL_RING_BUF_SIZE,
1149 &port->ip_dma_ringbuf);
1152 BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
1153 (TOTAL_RING_BUF_SIZE - 1)) == 0));
1154 DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
1155 "ip_dma_ringbuf 0x%p\n",
1157 (void *)port->ip_cpu_ringbuf,
1158 (void *)port->ip_dma_ringbuf));
1159 port->ip_inring = RING(port, RX_0_OR_2);
1160 port->ip_outring = RING(port, TX_0_OR_2);
1162 DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
1164 port_number, (void *)port, (void *)control));
1165 DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
1166 (void *)port->ip_serial_regs,
1167 (void *)port->ip_uart_regs));
1169 /* Initialize the hardware for IOC4 */
1172 DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
1175 port_number, (void *)port,
1176 (void *)port->ip_inring,
1177 (void *)port->ip_outring));
1179 /* Attach interrupt handlers */
1180 intr_connect(soft, IOC4_SIO_INTR_TYPE,
1181 GET_SIO_IR(port_number),
1184 intr_connect(soft, IOC4_OTHER_INTR_TYPE,
1185 GET_OTHER_IR(port_number),
1186 handle_dma_error_intr, port);
1192 * enable_intrs - enable interrupts
1193 * @port: port to enable
1194 * @mask: mask to use
1196 static void enable_intrs(struct ioc4_port *port, uint32_t mask)
1198 struct hooks *hooks = port->ip_hooks;
1200 if ((port->ip_ienb & mask) != mask) {
1201 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
1202 IOC4_SIO_INTR_TYPE);
1203 port->ip_ienb |= mask;
1207 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1208 IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
1212 * local_open - local open a port
1213 * @port: port to open
1215 static inline int local_open(struct ioc4_port *port)
1221 /* Pause the DMA interface if necessary */
1222 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1223 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1224 &port->ip_serial_regs->sscr);
1225 while((readl(&port->ip_serial_regs-> sscr)
1226 & IOC4_SSCR_PAUSE_STATE) == 0) {
1228 if (spiniter > MAXITER) {
1234 /* Reset the input fifo. If the uart received chars while the port
1235 * was closed and DMA is not enabled, the uart may have a bunch of
1236 * chars hanging around in its rx fifo which will not be discarded
1237 * by rclr in the upper layer. We must get rid of them here.
1239 writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
1240 &port->ip_uart_regs->i4u_fcr);
1242 writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
1243 /* UART_LCR_STOP == 1 stop */
1245 /* Re-enable DMA, set default threshold to intr whenever there is
1248 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1249 port->ip_sscr |= 1; /* default threshold */
1251 /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
1252 * flag if it was set above
1254 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1255 port->ip_tx_lowat = 1;
1260 * set_rx_timeout - Set rx timeout and threshold values.
1261 * @port: port to use
1262 * @timeout: timeout value in ticks
1264 static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
1268 port->ip_rx_timeout = timeout;
1270 /* Timeout is in ticks. Let's figure out how many chars we
1271 * can receive at the current baud rate in that interval
1272 * and set the rx threshold to that amount. There are 4 chars
1273 * per ring entry, so we'll divide the number of chars that will
1274 * arrive in timeout by 4.
1276 threshold = timeout * port->ip_baud / 10 / HZ / 4;
1278 threshold = 1; /* otherwise we'll intr all the time! */
1280 if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
1283 port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
1284 port->ip_sscr |= threshold;
1286 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1288 /* Now set the rx timeout to the given value */
1289 timeout = timeout * IOC4_SRTR_HZ / HZ;
1290 if (timeout > IOC4_SRTR_CNT)
1291 timeout = IOC4_SRTR_CNT;
1293 writel(timeout, &port->ip_serial_regs->srtr);
1298 * config_port - config the hardware
1299 * @port: port to config
1300 * @baud: baud rate for the port
1301 * @byte_size: data size
1302 * @stop_bits: number of stop bits
1303 * @parenb: parity enable ?
1304 * @parodd: odd parity ?
1307 config_port(struct ioc4_port *port,
1308 int baud, int byte_size, int stop_bits, int parenb, int parodd)
1313 DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
1314 __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd));
1316 if (set_baud(port, baud))
1319 switch (byte_size) {
1321 sizebits = UART_LCR_WLEN5;
1324 sizebits = UART_LCR_WLEN6;
1327 sizebits = UART_LCR_WLEN7;
1330 sizebits = UART_LCR_WLEN8;
1336 /* Pause the DMA interface if necessary */
1337 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1338 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1339 &port->ip_serial_regs->sscr);
1340 while((readl(&port->ip_serial_regs->sscr)
1341 & IOC4_SSCR_PAUSE_STATE) == 0) {
1343 if (spiniter > MAXITER)
1348 /* Clear relevant fields in lcr */
1349 lcr = readb(&port->ip_uart_regs->i4u_lcr);
1350 lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
1351 UART_LCR_PARITY | LCR_MASK_STOP_BITS);
1353 /* Set byte size in lcr */
1358 lcr |= UART_LCR_PARITY;
1360 lcr |= UART_LCR_EPAR;
1365 lcr |= UART_LCR_STOP /* 2 stop bits */ ;
1367 writeb(lcr, &port->ip_uart_regs->i4u_lcr);
1369 /* Re-enable the DMA interface if necessary */
1370 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1371 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1373 port->ip_baud = baud;
1375 /* When we get within this number of ring entries of filling the
1376 * entire ring on tx, place an EXPLICIT intr to generate a lowat
1377 * notification when output has drained.
1379 port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
1380 if (port->ip_tx_lowat == 0)
1381 port->ip_tx_lowat = 1;
1383 set_rx_timeout(port, port->ip_rx_timeout);
1389 * do_write - Write bytes to the port. Returns the number of bytes
1390 * actually written. Called from transmit_chars
1391 * @port: port to use
1392 * @buf: the stuff to write
1393 * @len: how many bytes in 'buf'
1395 static inline int do_write(struct ioc4_port *port, char *buf, int len)
1397 int prod_ptr, cons_ptr, total = 0;
1398 struct ring *outring;
1399 struct ring_entry *entry;
1400 struct hooks *hooks = port->ip_hooks;
1402 BUG_ON(!(len >= 0));
1404 prod_ptr = port->ip_tx_prod;
1405 cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
1406 outring = port->ip_outring;
1408 /* Maintain a 1-entry red-zone. The ring buffer is full when
1409 * (cons - prod) % ring_size is 1. Rather than do this subtraction
1410 * in the body of the loop, I'll do it now.
1412 cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
1414 /* Stuff the bytes into the output */
1415 while ((prod_ptr != cons_ptr) && (len > 0)) {
1418 /* Get 4 bytes (one ring entry) at a time */
1419 entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
1421 /* Invalidate all entries */
1422 entry->ring_allsc = 0;
1424 /* Copy in some bytes */
1425 for (xx = 0; (xx < 4) && (len > 0); xx++) {
1426 entry->ring_data[xx] = *buf++;
1427 entry->ring_sc[xx] = IOC4_TXCB_VALID;
1432 /* If we are within some small threshold of filling up the
1433 * entire ring buffer, we must place an EXPLICIT intr here
1434 * to generate a lowat interrupt in case we subsequently
1435 * really do fill up the ring and the caller goes to sleep.
1436 * No need to place more than one though.
1438 if (!(port->ip_flags & LOWAT_WRITTEN) &&
1439 ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
1440 <= port->ip_tx_lowat
1441 * (int)sizeof(struct ring_entry)) {
1442 port->ip_flags |= LOWAT_WRITTEN;
1443 entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
1446 /* Go on to next entry */
1447 prod_ptr += sizeof(struct ring_entry);
1448 prod_ptr &= PROD_CONS_MASK;
1451 /* If we sent something, start DMA if necessary */
1452 if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
1453 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1454 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1457 /* Store the new producer pointer. If tx is disabled, we stuff the
1458 * data into the ring buffer, but we don't actually start tx.
1460 if (!uart_tx_stopped(port->ip_port)) {
1461 writel(prod_ptr, &port->ip_serial_regs->stpir);
1463 /* If we are now transmitting, enable tx_mt interrupt so we
1464 * can disable DMA if necessary when the tx finishes.
1467 enable_intrs(port, hooks->intr_tx_mt);
1469 port->ip_tx_prod = prod_ptr;
1474 * disable_intrs - disable interrupts
1475 * @port: port to enable
1476 * @mask: mask to use
1478 static void disable_intrs(struct ioc4_port *port, uint32_t mask)
1480 struct hooks *hooks = port->ip_hooks;
1482 if (port->ip_ienb & mask) {
1483 write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
1484 IOC4_SIO_INTR_TYPE);
1485 port->ip_ienb &= ~mask;
1489 write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
1490 IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
1494 * set_notification - Modify event notification
1495 * @port: port to use
1496 * @mask: events mask
1499 static int set_notification(struct ioc4_port *port, int mask, int set_on)
1501 struct hooks *hooks = port->ip_hooks;
1502 uint32_t intrbits, sscrbits;
1506 intrbits = sscrbits = 0;
1508 if (mask & N_DATA_READY)
1509 intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
1510 if (mask & N_OUTPUT_LOWAT)
1511 intrbits |= hooks->intr_tx_explicit;
1512 if (mask & N_DDCD) {
1513 intrbits |= hooks->intr_delta_dcd;
1514 sscrbits |= IOC4_SSCR_RX_RING_DCD;
1517 intrbits |= hooks->intr_delta_cts;
1520 enable_intrs(port, intrbits);
1521 port->ip_notify |= mask;
1522 port->ip_sscr |= sscrbits;
1524 disable_intrs(port, intrbits);
1525 port->ip_notify &= ~mask;
1526 port->ip_sscr &= ~sscrbits;
1529 /* We require DMA if either DATA_READY or DDCD notification is
1530 * currently requested. If neither of these is requested and
1531 * there is currently no tx in progress, DMA may be disabled.
1533 if (port->ip_notify & (N_DATA_READY | N_DDCD))
1534 port->ip_sscr |= IOC4_SSCR_DMA_EN;
1535 else if (!(port->ip_ienb & hooks->intr_tx_mt))
1536 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
1538 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1543 * set_mcr - set the master control reg
1544 * @the_port: port to use
1547 * @mask2: shadow mask
1549 static inline int set_mcr(struct uart_port *the_port, int set,
1550 int mask1, int mask2)
1552 struct ioc4_port *port = get_ioc4_port(the_port);
1560 /* Pause the DMA interface if necessary */
1561 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1562 writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
1563 &port->ip_serial_regs->sscr);
1564 while ((readl(&port->ip_serial_regs->sscr)
1565 & IOC4_SSCR_PAUSE_STATE) == 0) {
1567 if (spiniter > MAXITER)
1571 shadow = readl(&port->ip_serial_regs->shadow);
1572 mcr = (shadow & 0xff000000) >> 24;
1582 writeb(mcr, &port->ip_uart_regs->i4u_mcr);
1583 writel(shadow, &port->ip_serial_regs->shadow);
1585 /* Re-enable the DMA interface if necessary */
1586 if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
1587 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1593 * ioc4_set_proto - set the protocol for the port
1594 * @port: port to use
1595 * @proto: protocol to use
1597 static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
1599 struct hooks *hooks = port->ip_hooks;
1603 /* Clear the appropriate GIO pin */
1604 writel(0, (&port->ip_mem->gppr_0 +
1605 hooks->rs422_select_pin));
1609 /* Set the appropriate GIO pin */
1610 writel(1, (&port->ip_mem->gppr_0 +
1611 hooks->rs422_select_pin));
1621 * transmit_chars - upper level write, called with ip_lock
1622 * @the_port: port to write
1624 static void transmit_chars(struct uart_port *the_port)
1626 int xmit_count, tail, head;
1629 struct tty_struct *tty;
1630 struct ioc4_port *port = get_ioc4_port(the_port);
1631 struct uart_info *info;
1638 info = the_port->info;
1641 if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
1642 /* Nothing to do or hw stopped */
1643 set_notification(port, N_ALL_OUTPUT, 0);
1647 head = info->xmit.head;
1648 tail = info->xmit.tail;
1649 start = (char *)&info->xmit.buf[tail];
1651 /* write out all the data or until the end of the buffer */
1652 xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
1653 if (xmit_count > 0) {
1654 result = do_write(port, start, xmit_count);
1657 xmit_count -= result;
1658 the_port->icount.tx += result;
1659 /* advance the pointers */
1661 tail &= UART_XMIT_SIZE - 1;
1662 info->xmit.tail = tail;
1663 start = (char *)&info->xmit.buf[tail];
1666 if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
1667 uart_write_wakeup(the_port);
1669 if (uart_circ_empty(&info->xmit)) {
1670 set_notification(port, N_OUTPUT_LOWAT, 0);
1672 set_notification(port, N_OUTPUT_LOWAT, 1);
1677 * ioc4_change_speed - change the speed of the port
1678 * @the_port: port to change
1679 * @new_termios: new termios settings
1680 * @old_termios: old termios settings
1683 ioc4_change_speed(struct uart_port *the_port,
1684 struct termios *new_termios, struct termios *old_termios)
1686 struct ioc4_port *port = get_ioc4_port(the_port);
1688 unsigned cflag, cval;
1689 int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8;
1690 struct uart_info *info = the_port->info;
1692 cflag = new_termios->c_cflag;
1694 switch (cflag & CSIZE) {
1716 /* cuz we always need a default ... */
1722 if (cflag & CSTOPB) {
1727 if (cflag & PARENB) {
1728 cval |= UART_LCR_PARITY;
1730 new_parity_enable = 1;
1732 if (cflag & PARODD) {
1733 cval |= UART_LCR_EPAR;
1736 if (cflag & IGNPAR) {
1737 cval &= ~UART_LCR_PARITY;
1738 new_parity_enable = 0;
1740 baud = uart_get_baud_rate(the_port, new_termios, old_termios,
1741 MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
1742 DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud));
1744 /* default is 9600 */
1748 if (!the_port->fifosize)
1749 the_port->fifosize = IOC4_MAX_CHARS;
1750 the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
1751 the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
1753 the_port->ignore_status_mask = N_ALL_INPUT;
1755 if (I_IGNPAR(info->tty))
1756 the_port->ignore_status_mask &= ~(N_PARITY_ERROR
1758 if (I_IGNBRK(info->tty)) {
1759 the_port->ignore_status_mask &= ~N_BREAK;
1760 if (I_IGNPAR(info->tty))
1761 the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
1763 if (!(cflag & CREAD)) {
1764 /* ignore everything */
1765 the_port->ignore_status_mask &= ~N_DATA_READY;
1768 if (cflag & CRTSCTS)
1769 info->flags |= ASYNC_CTS_FLOW;
1771 info->flags &= ~ASYNC_CTS_FLOW;
1773 /* Set the configuration and proper notification call */
1774 DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
1775 "config_port(baud %d data %d stop %d p enable %d parity %d),"
1776 " notification 0x%x\n",
1777 __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop,
1778 new_parity_enable, new_parity, the_port->ignore_status_mask));
1780 if ((config_port(port, baud, /* baud */
1781 new_data, /* byte size */
1782 new_stop, /* stop bits */
1783 new_parity_enable, /* set parity */
1784 new_parity)) >= 0) { /* parity 1==odd */
1785 set_notification(port, the_port->ignore_status_mask, 1);
1790 * ic4_startup_local - Start up the serial port - returns >= 0 if no errors
1791 * @the_port: Port to operate on
1793 static inline int ic4_startup_local(struct uart_port *the_port)
1796 struct ioc4_port *port;
1797 struct uart_info *info;
1802 port = get_ioc4_port(the_port);
1806 info = the_port->info;
1807 if (info->flags & UIF_INITIALIZED) {
1812 set_bit(TTY_IO_ERROR, &info->tty->flags);
1813 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1814 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1815 info->tty->alt_speed = 57600;
1816 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1817 info->tty->alt_speed = 115200;
1818 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1819 info->tty->alt_speed = 230400;
1820 if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1821 info->tty->alt_speed = 460800;
1825 /* set the speed of the serial port */
1826 ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
1828 /* enable hardware flow control - after ioc4_change_speed because
1829 * ASYNC_CTS_FLOW is set there */
1830 if (info->flags & ASYNC_CTS_FLOW) {
1831 port->ip_sscr |= IOC4_SSCR_HFC_EN;
1832 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
1834 info->flags |= UIF_INITIALIZED;
1839 * ioc4_cb_output_lowat - called when the output low water mark is hit
1840 * @port: port to output
1842 static void ioc4_cb_output_lowat(struct ioc4_port *port)
1844 /* ip_lock is set on the call here */
1845 if (port->ip_port) {
1846 transmit_chars(port->ip_port);
1852 * handle_intr - service any interrupts for the given port - 2nd level
1853 * called via sd_intr
1857 static void handle_intr(void *arg, uint32_t sio_ir)
1859 struct ioc4_port *port = (struct ioc4_port *)arg;
1860 struct hooks *hooks = port->ip_hooks;
1861 unsigned int rx_high_rd_aborted = 0;
1863 struct uart_port *the_port;
1866 /* Possible race condition here: The tx_mt interrupt bit may be
1867 * cleared without the intervention of the interrupt handler,
1868 * e.g. by a write. If the top level interrupt handler reads a
1869 * tx_mt, then some other processor does a write, starting up
1870 * output, then we come in here, see the tx_mt and stop DMA, the
1871 * output started by the other processor will hang. Thus we can
1872 * only rely on tx_mt being legitimate if it is read while the
1873 * port lock is held. Therefore this bit must be ignored in the
1874 * passed in interrupt mask which was read by the top level
1875 * interrupt handler since the port lock was not held at the time
1876 * it was read. We can only rely on this bit being accurate if it
1877 * is read while the port lock is held. So we'll clear it for now,
1878 * and reload it later once we have the port lock.
1880 sio_ir &= ~(hooks->intr_tx_mt);
1882 spin_lock_irqsave(&port->ip_lock, flags);
1884 loop_counter = MAXITER; /* to avoid hangs */
1889 if ( loop_counter-- <= 0 ) {
1890 printk(KERN_WARNING "IOC4 serial: "
1891 "possible hang condition/"
1892 "port stuck on interrupt.\n");
1896 /* Handle a DCD change */
1897 if (sio_ir & hooks->intr_delta_dcd) {
1898 /* ACK the interrupt */
1899 writel(hooks->intr_delta_dcd,
1900 &port->ip_mem->sio_ir);
1902 shadow = readl(&port->ip_serial_regs->shadow);
1904 if ((port->ip_notify & N_DDCD)
1905 && (shadow & IOC4_SHADOW_DCD)
1906 && (port->ip_port)) {
1907 the_port = port->ip_port;
1908 the_port->icount.dcd = 1;
1909 wake_up_interruptible
1910 (&the_port-> info->delta_msr_wait);
1911 } else if ((port->ip_notify & N_DDCD)
1912 && !(shadow & IOC4_SHADOW_DCD)) {
1913 /* Flag delta DCD/no DCD */
1914 port->ip_flags |= DCD_ON;
1918 /* Handle a CTS change */
1919 if (sio_ir & hooks->intr_delta_cts) {
1920 /* ACK the interrupt */
1921 writel(hooks->intr_delta_cts,
1922 &port->ip_mem->sio_ir);
1924 shadow = readl(&port->ip_serial_regs->shadow);
1926 if ((port->ip_notify & N_DCTS)
1927 && (port->ip_port)) {
1928 the_port = port->ip_port;
1929 the_port->icount.cts =
1930 (shadow & IOC4_SHADOW_CTS) ? 1 : 0;
1931 wake_up_interruptible
1932 (&the_port->info->delta_msr_wait);
1936 /* rx timeout interrupt. Must be some data available. Put this
1937 * before the check for rx_high since servicing this condition
1938 * may cause that condition to clear.
1940 if (sio_ir & hooks->intr_rx_timer) {
1941 /* ACK the interrupt */
1942 writel(hooks->intr_rx_timer,
1943 &port->ip_mem->sio_ir);
1945 if ((port->ip_notify & N_DATA_READY)
1946 && (port->ip_port)) {
1947 /* ip_lock is set on call here */
1948 receive_chars(port->ip_port);
1952 /* rx high interrupt. Must be after rx_timer. */
1953 else if (sio_ir & hooks->intr_rx_high) {
1954 /* Data available, notify upper layer */
1955 if ((port->ip_notify & N_DATA_READY)
1957 /* ip_lock is set on call here */
1958 receive_chars(port->ip_port);
1961 /* We can't ACK this interrupt. If receive_chars didn't
1962 * cause the condition to clear, we'll have to disable
1963 * the interrupt until the data is drained.
1964 * If the read was aborted, don't disable the interrupt
1965 * as this may cause us to hang indefinitely. An
1966 * aborted read generally means that this interrupt
1967 * hasn't been delivered to the cpu yet anyway, even
1968 * though we see it as asserted when we read the sio_ir.
1970 if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
1971 if ((port->ip_flags & READ_ABORTED) == 0) {
1972 port->ip_ienb &= ~hooks->intr_rx_high;
1973 port->ip_flags |= INPUT_HIGH;
1975 rx_high_rd_aborted++;
1980 /* We got a low water interrupt: notify upper layer to
1981 * send more data. Must come before tx_mt since servicing
1982 * this condition may cause that condition to clear.
1984 if (sio_ir & hooks->intr_tx_explicit) {
1985 port->ip_flags &= ~LOWAT_WRITTEN;
1987 /* ACK the interrupt */
1988 writel(hooks->intr_tx_explicit,
1989 &port->ip_mem->sio_ir);
1991 if (port->ip_notify & N_OUTPUT_LOWAT)
1992 ioc4_cb_output_lowat(port);
1995 /* Handle tx_mt. Must come after tx_explicit. */
1996 else if (sio_ir & hooks->intr_tx_mt) {
1997 /* If we are expecting a lowat notification
1998 * and we get to this point it probably means that for
1999 * some reason the tx_explicit didn't work as expected
2000 * (that can legitimately happen if the output buffer is
2001 * filled up in just the right way).
2002 * So send the notification now.
2004 if (port->ip_notify & N_OUTPUT_LOWAT) {
2005 ioc4_cb_output_lowat(port);
2007 /* We need to reload the sio_ir since the lowat
2008 * call may have caused another write to occur,
2009 * clearing the tx_mt condition.
2011 sio_ir = PENDING(port);
2014 /* If the tx_mt condition still persists even after the
2015 * lowat call, we've got some work to do.
2017 if (sio_ir & hooks->intr_tx_mt) {
2019 /* If we are not currently expecting DMA input,
2020 * and the transmitter has just gone idle,
2021 * there is no longer any reason for DMA, so
2024 if (!(port->ip_notify
2025 & (N_DATA_READY | N_DDCD))) {
2026 BUG_ON(!(port->ip_sscr
2027 & IOC4_SSCR_DMA_EN));
2028 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2029 writel(port->ip_sscr,
2030 &port->ip_serial_regs->sscr);
2033 /* Prevent infinite tx_mt interrupt */
2034 port->ip_ienb &= ~hooks->intr_tx_mt;
2037 sio_ir = PENDING(port);
2039 /* if the read was aborted and only hooks->intr_rx_high,
2040 * clear hooks->intr_rx_high, so we do not loop forever.
2043 if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
2044 sio_ir &= ~hooks->intr_rx_high;
2046 } while (sio_ir & hooks->intr_all);
2048 spin_unlock_irqrestore(&port->ip_lock, flags);
2050 /* Re-enable interrupts before returning from interrupt handler.
2051 * Getting interrupted here is okay. It'll just v() our semaphore, and
2052 * we'll come through the loop again.
2055 write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
2056 IOC4_SIO_INTR_TYPE);
2060 * ioc4_cb_post_ncs - called for some basic errors
2061 * @port: port to use
2064 static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
2066 struct uart_icount *icount;
2068 icount = &the_port->icount;
2070 if (ncs & NCS_BREAK)
2072 if (ncs & NCS_FRAMING)
2074 if (ncs & NCS_OVERRUN)
2076 if (ncs & NCS_PARITY)
2081 * do_read - Read in bytes from the port. Return the number of bytes
2083 * @the_port: port to use
2084 * @buf: place to put the stuff we read
2085 * @len: how big 'buf' is
2088 static inline int do_read(struct uart_port *the_port, unsigned char *buf,
2091 int prod_ptr, cons_ptr, total;
2092 struct ioc4_port *port = get_ioc4_port(the_port);
2093 struct ring *inring;
2094 struct ring_entry *entry;
2095 struct hooks *hooks = port->ip_hooks;
2100 BUG_ON(!(len >= 0));
2103 /* There is a nasty timing issue in the IOC4. When the rx_timer
2104 * expires or the rx_high condition arises, we take an interrupt.
2105 * At some point while servicing the interrupt, we read bytes from
2106 * the ring buffer and re-arm the rx_timer. However the rx_timer is
2107 * not started until the first byte is received *after* it is armed,
2108 * and any bytes pending in the rx construction buffers are not drained
2109 * to memory until either there are 4 bytes available or the rx_timer
2110 * expires. This leads to a potential situation where data is left
2111 * in the construction buffers forever - 1 to 3 bytes were received
2112 * after the interrupt was generated but before the rx_timer was
2113 * re-armed. At that point as long as no subsequent bytes are received
2114 * the timer will never be started and the bytes will remain in the
2115 * construction buffer forever. The solution is to execute a DRAIN
2116 * command after rearming the timer. This way any bytes received before
2117 * the DRAIN will be drained to memory, and any bytes received after
2118 * the DRAIN will start the TIMER and be drained when it expires.
2119 * Luckily, this only needs to be done when the DMA buffer is empty
2120 * since there is no requirement that this function return all
2121 * available data as long as it returns some.
2123 /* Re-arm the timer */
2124 writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
2125 &port->ip_serial_regs->srcir);
2127 prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
2128 cons_ptr = port->ip_rx_cons;
2130 if (prod_ptr == cons_ptr) {
2133 /* Input buffer appears empty, do a flush. */
2135 /* DMA must be enabled for this to work. */
2136 if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
2137 port->ip_sscr |= IOC4_SSCR_DMA_EN;
2141 /* Potential race condition: we must reload the srpir after
2142 * issuing the drain command, otherwise we could think the rx
2143 * buffer is empty, then take a very long interrupt, and when
2144 * we come back it's full and we wait forever for the drain to
2147 writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
2148 &port->ip_serial_regs->sscr);
2149 prod_ptr = readl(&port->ip_serial_regs->srpir)
2152 /* We must not wait for the DRAIN to complete unless there are
2153 * at least 8 bytes (2 ring entries) available to receive the
2154 * data otherwise the DRAIN will never complete and we'll
2156 * In fact, to make things easier, I'll just ignore the flush if
2157 * there is any data at all now available.
2159 if (prod_ptr == cons_ptr) {
2161 while (readl(&port->ip_serial_regs->sscr) &
2162 IOC4_SSCR_RX_DRAIN) {
2164 if (loop_counter > MAXITER)
2168 /* SIGH. We have to reload the prod_ptr *again* since
2169 * the drain may have caused it to change
2171 prod_ptr = readl(&port->ip_serial_regs->srpir)
2175 port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
2176 writel(port->ip_sscr, &port->ip_serial_regs->sscr);
2179 inring = port->ip_inring;
2180 port->ip_flags &= ~READ_ABORTED;
2183 loop_counter = 0xfffff; /* to avoid hangs */
2185 /* Grab bytes from the hardware */
2186 while ((prod_ptr != cons_ptr) && (len > 0)) {
2187 entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
2189 if ( loop_counter-- <= 0 ) {
2190 printk(KERN_WARNING "IOC4 serial: "
2191 "possible hang condition/"
2192 "port stuck on read.\n");
2196 /* According to the producer pointer, this ring entry
2197 * must contain some data. But if the PIO happened faster
2198 * than the DMA, the data may not be available yet, so let's
2199 * wait until it arrives.
2201 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2202 /* Indicate the read is aborted so we don't disable
2203 * the interrupt thinking that the consumer is
2206 port->ip_flags |= READ_ABORTED;
2211 /* Load the bytes/status out of the ring entry */
2212 for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
2213 sc = &(entry->ring_sc[byte_num]);
2215 /* Check for change in modem state or overrun */
2216 if ((*sc & IOC4_RXSB_MODEM_VALID)
2217 && (port->ip_notify & N_DDCD)) {
2218 /* Notify upper layer if DCD dropped */
2220 if ((port->ip_flags & DCD_ON)
2221 && !(*sc & IOC4_RXSB_DCD)) {
2223 /* If we have already copied some data,
2224 * return it. We'll pick up the carrier
2225 * drop on the next pass. That way we
2226 * don't throw away the data that has
2227 * already been copied back to
2228 * the caller's buffer.
2234 port->ip_flags &= ~DCD_ON;
2236 /* Turn off this notification so the
2237 * carrier drop protocol won't see it
2238 * again when it does a read.
2240 *sc &= ~IOC4_RXSB_MODEM_VALID;
2242 /* To keep things consistent, we need
2243 * to update the consumer pointer so
2244 * the next reader won't come in and
2245 * try to read the same ring entries
2246 * again. This must be done here before
2250 if ((entry->ring_allsc & RING_ANY_VALID)
2252 cons_ptr += (int)sizeof
2253 (struct ring_entry);
2254 cons_ptr &= PROD_CONS_MASK;
2257 &port->ip_serial_regs->srcir);
2258 port->ip_rx_cons = cons_ptr;
2260 /* Notify upper layer of carrier drop */
2261 if ((port->ip_notify & N_DDCD)
2263 the_port->icount.dcd = 0;
2264 wake_up_interruptible
2269 /* If we had any data to return, we
2270 * would have returned it above.
2275 if (*sc & IOC4_RXSB_MODEM_VALID) {
2276 /* Notify that an input overrun occurred */
2277 if ((*sc & IOC4_RXSB_OVERRUN)
2278 && (port->ip_notify & N_OVERRUN_ERROR)) {
2279 ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
2281 /* Don't look at this byte again */
2282 *sc &= ~IOC4_RXSB_MODEM_VALID;
2285 /* Check for valid data or RX errors */
2286 if ((*sc & IOC4_RXSB_DATA_VALID) &&
2287 ((*sc & (IOC4_RXSB_PAR_ERR
2288 | IOC4_RXSB_FRAME_ERR
2290 && (port->ip_notify & (N_PARITY_ERROR
2293 /* There is an error condition on the next byte.
2294 * If we have already transferred some bytes,
2295 * we'll stop here. Otherwise if this is the
2296 * first byte to be read, we'll just transfer
2297 * it alone after notifying the
2298 * upper layer of its status.
2304 if ((*sc & IOC4_RXSB_PAR_ERR) &&
2305 (port->ip_notify & N_PARITY_ERROR)) {
2306 ioc4_cb_post_ncs(the_port,
2309 if ((*sc & IOC4_RXSB_FRAME_ERR) &&
2310 (port->ip_notify & N_FRAMING_ERROR)){
2311 ioc4_cb_post_ncs(the_port,
2314 if ((*sc & IOC4_RXSB_BREAK)
2315 && (port->ip_notify & N_BREAK)) {
2323 if (*sc & IOC4_RXSB_DATA_VALID) {
2324 *sc &= ~IOC4_RXSB_DATA_VALID;
2325 *buf = entry->ring_data[byte_num];
2332 /* If we used up this entry entirely, go on to the next one,
2333 * otherwise we must have run out of buffer space, so
2334 * leave the consumer pointer here for the next read in case
2335 * there are still unread bytes in this entry.
2337 if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
2338 cons_ptr += (int)sizeof(struct ring_entry);
2339 cons_ptr &= PROD_CONS_MASK;
2343 /* Update consumer pointer and re-arm rx timer interrupt */
2344 writel(cons_ptr, &port->ip_serial_regs->srcir);
2345 port->ip_rx_cons = cons_ptr;
2347 /* If we have now dipped below the rx high water mark and we have
2348 * rx_high interrupt turned off, we can now turn it back on again.
2350 if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
2351 & PROD_CONS_MASK) < ((port->ip_sscr &
2352 IOC4_SSCR_RX_THRESHOLD)
2353 << IOC4_PROD_CONS_PTR_OFF))) {
2354 port->ip_flags &= ~INPUT_HIGH;
2355 enable_intrs(port, hooks->intr_rx_high);
2360 * receive_chars - upper level read. Called with ip_lock.
2361 * @the_port: port to read from
2363 static void receive_chars(struct uart_port *the_port)
2365 struct tty_struct *tty;
2366 unsigned char ch[IOC4_MAX_CHARS];
2367 int read_count, request_count;
2368 struct uart_icount *icount;
2369 struct uart_info *info = the_port->info;
2371 /* Make sure all the pointers are "good" ones */
2379 request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
2381 if (request_count > 0) {
2382 if (request_count > IOC4_MAX_CHARS - 2)
2383 request_count = IOC4_MAX_CHARS - 2;
2384 icount = &the_port->icount;
2385 read_count = do_read(the_port, ch, request_count);
2386 if (read_count > 0) {
2387 memcpy(tty->flip.char_buf_ptr, ch, read_count);
2388 memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
2389 tty->flip.char_buf_ptr += read_count;
2390 tty->flip.flag_buf_ptr += read_count;
2391 tty->flip.count += read_count;
2392 icount->rx += read_count;
2395 tty_flip_buffer_push(tty);
2399 * ic4_type - What type of console are we?
2400 * @port: Port to operate with (we ignore since we only have one port)
2403 static const char *ic4_type(struct uart_port *the_port)
2405 return "SGI IOC4 Serial";
2409 * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty
2410 * @port: Port to operate on (we ignore since we always return 1)
2413 static unsigned int ic4_tx_empty(struct uart_port *the_port)
2419 * ic4_stop_tx - stop the transmitter
2420 * @port: Port to operate on
2421 * @tty_stop: Set to 1 if called via uart_stop
2424 static void ic4_stop_tx(struct uart_port *the_port, unsigned int tty_stop)
2429 * null_void_function -
2430 * @port: Port to operate on
2433 static void null_void_function(struct uart_port *the_port)
2438 * ic4_shutdown - shut down the port - free irq and disable
2439 * @port: Port to shut down
2442 static void ic4_shutdown(struct uart_port *the_port)
2444 unsigned long port_flags;
2445 struct ioc4_port *port;
2446 struct uart_info *info;
2448 port = get_ioc4_port(the_port);
2452 info = the_port->info;
2454 if (!(info->flags & UIF_INITIALIZED))
2457 wake_up_interruptible(&info->delta_msr_wait);
2460 set_bit(TTY_IO_ERROR, &info->tty->flags);
2462 spin_lock_irqsave(&port->ip_lock, port_flags);
2463 set_notification(port, N_ALL, 0);
2464 info->flags &= ~UIF_INITIALIZED;
2465 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2469 * ic4_set_mctrl - set control lines (dtr, rts, etc)
2470 * @port: Port to operate on
2471 * @mctrl: Lines to set/unset
2474 static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
2476 unsigned char mcr = 0;
2478 if (mctrl & TIOCM_RTS)
2479 mcr |= UART_MCR_RTS;
2480 if (mctrl & TIOCM_DTR)
2481 mcr |= UART_MCR_DTR;
2482 if (mctrl & TIOCM_OUT1)
2483 mcr |= UART_MCR_OUT1;
2484 if (mctrl & TIOCM_OUT2)
2485 mcr |= UART_MCR_OUT2;
2486 if (mctrl & TIOCM_LOOP)
2487 mcr |= UART_MCR_LOOP;
2489 set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR);
2493 * ic4_get_mctrl - get control line info
2494 * @port: port to operate on
2497 static unsigned int ic4_get_mctrl(struct uart_port *the_port)
2499 struct ioc4_port *port = get_ioc4_port(the_port);
2501 unsigned int ret = 0;
2506 shadow = readl(&port->ip_serial_regs->shadow);
2507 if (shadow & IOC4_SHADOW_DCD)
2509 if (shadow & IOC4_SHADOW_DR)
2511 if (shadow & IOC4_SHADOW_CTS)
2517 * ic4_start_tx - Start transmitter, flush any output
2518 * @port: Port to operate on
2519 * @tty_stop: Set to 1 if called via uart_start
2522 static void ic4_start_tx(struct uart_port *the_port, unsigned int tty_stop)
2524 struct ioc4_port *port = get_ioc4_port(the_port);
2525 unsigned long flags;
2528 spin_lock_irqsave(&port->ip_lock, flags);
2529 transmit_chars(the_port);
2530 spin_unlock_irqrestore(&port->ip_lock, flags);
2535 * ic4_break_ctl - handle breaks
2536 * @port: Port to operate on
2537 * @break_state: Break state
2540 static void ic4_break_ctl(struct uart_port *the_port, int break_state)
2545 * ic4_startup - Start up the serial port - always return 0 (We're always on)
2546 * @port: Port to operate on
2549 static int ic4_startup(struct uart_port *the_port)
2552 struct ioc4_port *port;
2553 struct ioc4_control *control;
2554 struct uart_info *info;
2555 unsigned long port_flags;
2560 port = get_ioc4_port(the_port);
2564 info = the_port->info;
2566 control = port->ip_control;
2571 /* Start up the serial port */
2572 spin_lock_irqsave(&port->ip_lock, port_flags);
2573 retval = ic4_startup_local(the_port);
2574 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2579 * ic4_set_termios - set termios stuff
2580 * @port: port to operate on
2581 * @termios: New settings
2586 ic4_set_termios(struct uart_port *the_port,
2587 struct termios *termios, struct termios *old_termios)
2589 struct ioc4_port *port = get_ioc4_port(the_port);
2590 unsigned long port_flags;
2592 spin_lock_irqsave(&port->ip_lock, port_flags);
2593 ioc4_change_speed(the_port, termios, old_termios);
2594 spin_unlock_irqrestore(&port->ip_lock, port_flags);
2598 * ic4_request_port - allocate resources for port - no op....
2599 * @port: port to operate on
2602 static int ic4_request_port(struct uart_port *port)
2607 /* Associate the uart functions above - given to serial core */
2609 static struct uart_ops ioc4_ops = {
2610 .tx_empty = ic4_tx_empty,
2611 .set_mctrl = ic4_set_mctrl,
2612 .get_mctrl = ic4_get_mctrl,
2613 .stop_tx = ic4_stop_tx,
2614 .start_tx = ic4_start_tx,
2615 .stop_rx = null_void_function,
2616 .enable_ms = null_void_function,
2617 .break_ctl = ic4_break_ctl,
2618 .startup = ic4_startup,
2619 .shutdown = ic4_shutdown,
2620 .set_termios = ic4_set_termios,
2622 .release_port = null_void_function,
2623 .request_port = ic4_request_port,
2627 * Boot-time initialization code
2630 static struct uart_driver ioc4_uart = {
2631 .owner = THIS_MODULE,
2632 .driver_name = "ioc4_serial",
2633 .dev_name = DEVICE_NAME,
2634 .major = DEVICE_MAJOR,
2635 .minor = DEVICE_MINOR,
2636 .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
2640 * ioc4_serial_core_attach - register with serial core
2641 * This is done during pci probing
2642 * @pdev: handle for this card
2645 ioc4_serial_core_attach(struct pci_dev *pdev)
2647 struct ioc4_port *port;
2648 struct uart_port *the_port;
2649 struct ioc4_control *control = pci_get_drvdata(pdev);
2652 DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
2653 __FUNCTION__, pdev, (void *)control));
2658 /* once around for each port on this card */
2659 for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
2660 the_port = &control->ic_port[ii].icp_uart_port;
2661 port = control->ic_port[ii].icp_port;
2662 port->ip_port = the_port;
2664 DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n",
2665 __FUNCTION__, (void *)the_port,
2668 spin_lock_init(&the_port->lock);
2669 /* membase, iobase and mapbase just need to be non-0 */
2670 the_port->membase = (unsigned char __iomem *)1;
2671 the_port->line = the_port->iobase = ii;
2672 the_port->mapbase = 1;
2673 the_port->type = PORT_16550A;
2674 the_port->fifosize = IOC4_MAX_CHARS;
2675 the_port->ops = &ioc4_ops;
2676 the_port->irq = control->ic_irq;
2677 the_port->dev = &pdev->dev;
2678 if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
2680 "%s: unable to add port %d\n",
2681 __FUNCTION__, the_port->line);
2684 ("IOC4 serial driver port %d irq = %d\n",
2685 the_port->line, the_port->irq));
2687 /* all ports are rs232 for now */
2688 ioc4_set_proto(port, PROTO_RS232);
2694 * ioc4_serial_attach_one - register attach function
2695 * called per card found from ioc4_serial_detect as part
2697 * @pdev: handle for this card
2698 * @pci_id: pci id for this card
2701 ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
2703 struct ioc4_mem __iomem *mem;
2704 unsigned long tmp_addr, tmp_addr1;
2705 struct ioc4_serial __iomem *serial;
2706 struct ioc4_soft *soft;
2707 struct ioc4_control *control;
2711 DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id));
2713 /* Map in the ioc4 memory */
2714 tmp_addr = pci_resource_start(pdev, 0);
2717 "ioc4 (%p) : unable to get PIO mapping for "
2718 "MEM space\n", (void *)pdev);
2721 if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) {
2723 "ioc4 (%p): unable to get request region for "
2724 "MEM space\n", (void *)pdev);
2727 mem = ioremap(tmp_addr, sizeof(struct ioc4_mem));
2730 "ioc4 (%p) : unable to remap ioc4 memory\n",
2736 /* request serial registers */
2737 tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET;
2739 if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
2742 "ioc4 (%p): unable to get request region for "
2743 "uart space\n", (void *)pdev);
2747 serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
2750 "ioc4 (%p) : unable to remap ioc4 serial register\n",
2755 DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
2756 __FUNCTION__, (void *)mem, (void *)serial));
2758 /* Get memory for the new card */
2759 control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
2763 printk(KERN_WARNING "ioc4_attach_one"
2764 ": unable to get memory for the IOC4\n");
2768 memset(control, 0, sizeof(struct ioc4_control));
2769 pci_set_drvdata(pdev, control);
2771 /* Allocate the soft structure */
2772 soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
2775 "ioc4 (%p): unable to get memory for the soft struct\n",
2780 memset(soft, 0, sizeof(struct ioc4_soft));
2782 spin_lock_init(&soft->is_ir_lock);
2783 soft->is_ioc4_mem_addr = mem;
2784 soft->is_ioc4_serial_addr = serial;
2787 pci_read_config_dword(pdev, PCI_COMMAND, &tmp);
2788 pci_write_config_dword(pdev, PCI_COMMAND,
2789 tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
2791 writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr);
2793 /* Enable serial port mode select generic PIO pins as outputs */
2794 writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
2795 | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
2798 /* Clear and disable all interrupts */
2799 write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
2800 writel(~0, &mem->sio_ir);
2801 write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR),
2802 IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
2803 writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR),
2805 control->ic_soft = soft;
2806 if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ,
2807 "sgi-ioc4serial", (void *)soft)) {
2808 control->ic_irq = pdev->irq;
2811 "%s : request_irq fails for IRQ 0x%x\n ",
2812 __FUNCTION__, pdev->irq);
2814 if ((ret = ioc4_attach_local(pdev, control, soft,
2815 soft->is_ioc4_mem_addr,
2816 soft->is_ioc4_serial_addr)))
2819 /* register port with the serial core */
2821 if ((ret = ioc4_serial_core_attach(pdev)))
2826 /* error exits that give back resources */
2832 release_region(tmp_addr1, sizeof(struct ioc4_serial));
2834 release_region(tmp_addr, sizeof(struct ioc4_mem));
2841 * ioc4_serial_remove_one - detach function
2843 * @pdev: handle for this card
2847 void ioc4_serial_remove_one(struct pci_dev *pdev)
2850 struct ioc4_control *control;
2851 struct uart_port *the_port;
2852 struct ioc4_port *port;
2853 struct ioc4_soft *soft;
2855 control = pci_get_drvdata(pdev);
2857 for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
2858 the_port = &control->ic_port[ii].icp_uart_port;
2860 uart_remove_one_port(&ioc4_uart, the_port);
2862 port = control->ic_port[ii].icp_port;
2863 if (!(ii & 1) && port) {
2864 pci_free_consistent(port->ip_pdev,
2865 TOTAL_RING_BUF_SIZE,
2866 (void *)port->ip_cpu_ringbuf,
2867 port->ip_dma_ringbuf);
2871 soft = control->ic_soft;
2873 free_irq(control->ic_irq, (void *)soft);
2874 if (soft->is_ioc4_serial_addr) {
2875 release_region((unsigned long)
2876 soft->is_ioc4_serial_addr,
2877 sizeof(struct ioc4_serial));
2882 pci_set_drvdata(pdev, NULL);
2883 uart_unregister_driver(&ioc4_uart);
2888 * ioc4_serial_init - module init
2890 int ioc4_serial_init(void)
2894 /* register with serial core */
2895 if ((ret = uart_register_driver(&ioc4_uart)) < 0) {
2897 "%s: Couldn't register IOC4 serial driver\n",
2904 MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
2905 MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
2906 MODULE_LICENSE("GPL");
2908 EXPORT_SYMBOL(ioc4_serial_init);
2909 EXPORT_SYMBOL(ioc4_serial_attach_one);
projects / linux-flexiantxendom0-natty.git / blob