Linux-2.6.12-rc2
[linux-flexiantxendom0-natty.git] / drivers / sbus / char / display7seg.c
1 /* $Id: display7seg.c,v 1.6 2002/01/08 16:00:16 davem Exp $
2  *
3  * display7seg - Driver implementation for the 7-segment display
4  * present on Sun Microsystems CP1400 and CP1500
5  *
6  * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
7  *
8  */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/fs.h>
13 #include <linux/errno.h>
14 #include <linux/major.h>
15 #include <linux/init.h>
16 #include <linux/miscdevice.h>
17 #include <linux/ioport.h>               /* request_region, check_region */
18 #include <asm/atomic.h>
19 #include <asm/ebus.h>                   /* EBus device                                  */
20 #include <asm/oplib.h>                  /* OpenProm Library                     */
21 #include <asm/uaccess.h>                /* put_/get_user                        */
22
23 #include <asm/display7seg.h>
24
25 #define D7S_MINOR       193
26 #define D7S_OBPNAME     "display7seg"
27 #define D7S_DEVNAME "d7s"
28
29 static int sol_compat = 0;              /* Solaris compatibility mode   */
30
31 #ifdef MODULE
32
33 /* Solaris compatibility flag -
34  * The Solaris implementation omits support for several
35  * documented driver features (ref Sun doc 806-0180-03).  
36  * By default, this module supports the documented driver 
37  * abilities, rather than the Solaris implementation:
38  *
39  *      1) Device ALWAYS reverts to OBP-specified FLIPPED mode
40  *         upon closure of device or module unload.
41  *      2) Device ioctls D7SIOCRD/D7SIOCWR honor toggling of
42  *         FLIP bit
43  *
44  * If you wish the device to operate as under Solaris,
45  * omitting above features, set this parameter to non-zero.
46  */
47 module_param
48         (sol_compat, int, 0);
49 MODULE_PARM_DESC
50         (sol_compat, 
51          "Disables documented functionality omitted from Solaris driver");
52
53 MODULE_AUTHOR
54         ("Eric Brower <ebrower@usa.net>");
55 MODULE_DESCRIPTION
56         ("7-Segment Display driver for Sun Microsystems CP1400/1500");
57 MODULE_LICENSE("GPL");
58 MODULE_SUPPORTED_DEVICE
59         ("d7s");
60 #endif /* ifdef MODULE */
61
62 /*
63  * Register block address- see header for details
64  * -----------------------------------------
65  * | DP | ALARM | FLIP | 4 | 3 | 2 | 1 | 0 |
66  * -----------------------------------------
67  *
68  * DP           - Toggles decimal point on/off 
69  * ALARM        - Toggles "Alarm" LED green/red
70  * FLIP         - Inverts display for upside-down mounted board
71  * bits 0-4     - 7-segment display contents
72  */
73 static void __iomem* d7s_regs;
74
75 static inline void d7s_free(void)
76 {
77         iounmap(d7s_regs);
78 }
79
80 static inline int d7s_obpflipped(void)
81 {
82         int opt_node;
83
84         opt_node = prom_getchild(prom_root_node);
85         opt_node = prom_searchsiblings(opt_node, "options");
86         return ((-1 != prom_getintdefault(opt_node, "d7s-flipped?", -1)) ? 0 : 1);
87 }
88
89 static atomic_t d7s_users = ATOMIC_INIT(0);
90
91 static int d7s_open(struct inode *inode, struct file *f)
92 {
93         if (D7S_MINOR != iminor(inode))
94                 return -ENODEV;
95         atomic_inc(&d7s_users);
96         return 0;
97 }
98
99 static int d7s_release(struct inode *inode, struct file *f)
100 {
101         /* Reset flipped state to OBP default only if
102          * no other users have the device open and we
103          * are not operating in solaris-compat mode
104          */
105         if (atomic_dec_and_test(&d7s_users) && !sol_compat) {
106                 int regval = 0;
107
108                 regval = readb(d7s_regs);
109                 (0 == d7s_obpflipped()) ? 
110                         writeb(regval |= D7S_FLIP,  d7s_regs): 
111                         writeb(regval &= ~D7S_FLIP, d7s_regs);
112         }
113
114         return 0;
115 }
116
117 static int d7s_ioctl(struct inode *inode, struct file *f, 
118                      unsigned int cmd, unsigned long arg)
119 {
120         __u8 regs = readb(d7s_regs);
121         __u8 ireg = 0;
122
123         if (D7S_MINOR != iminor(inode))
124                 return -ENODEV;
125
126         switch (cmd) {
127         case D7SIOCWR:
128                 /* assign device register values
129                  * we mask-out D7S_FLIP if in sol_compat mode
130                  */
131                 if (get_user(ireg, (int __user *) arg))
132                         return -EFAULT;
133                 if (0 != sol_compat) {
134                         (regs & D7S_FLIP) ? 
135                                 (ireg |= D7S_FLIP) : (ireg &= ~D7S_FLIP);
136                 }
137                 writeb(ireg, d7s_regs);
138                 break;
139
140         case D7SIOCRD:
141                 /* retrieve device register values
142                  * NOTE: Solaris implementation returns D7S_FLIP bit
143                  * as toggled by user, even though it does not honor it.
144                  * This driver will not misinform you about the state
145                  * of your hardware while in sol_compat mode
146                  */
147                 if (put_user(regs, (int __user *) arg))
148                         return -EFAULT;
149                 break;
150
151         case D7SIOCTM:
152                 /* toggle device mode-- flip display orientation */
153                 (regs & D7S_FLIP) ? 
154                         (regs &= ~D7S_FLIP) : (regs |= D7S_FLIP);
155                 writeb(regs, d7s_regs);
156                 break;
157         };
158
159         return 0;
160 }
161
162 static struct file_operations d7s_fops = {
163         .owner =        THIS_MODULE,
164         .ioctl =        d7s_ioctl,
165         .open =         d7s_open,
166         .release =      d7s_release,
167 };
168
169 static struct miscdevice d7s_miscdev = { D7S_MINOR, D7S_DEVNAME, &d7s_fops };
170
171 static int __init d7s_init(void)
172 {
173         struct linux_ebus *ebus = NULL;
174         struct linux_ebus_device *edev = NULL;
175         int iTmp = 0, regs = 0;
176
177         for_each_ebus(ebus) {
178                 for_each_ebusdev(edev, ebus) {
179                         if (!strcmp(edev->prom_name, D7S_OBPNAME))
180                                 goto ebus_done;
181                 }
182         }
183
184 ebus_done:
185         if(!edev) {
186                 printk("%s: unable to locate device\n", D7S_DEVNAME);
187                 return -ENODEV;
188         }
189
190         d7s_regs = ioremap(edev->resource[0].start, sizeof(__u8));
191
192         iTmp = misc_register(&d7s_miscdev);
193         if (0 != iTmp) {
194                 printk("%s: unable to acquire miscdevice minor %i\n",
195                        D7S_DEVNAME, D7S_MINOR);
196                 iounmap(d7s_regs);
197                 return iTmp;
198         }
199
200         /* OBP option "d7s-flipped?" is honored as default
201          * for the device, and reset default when detached
202          */
203         regs = readb(d7s_regs);
204         iTmp = d7s_obpflipped();
205         (0 == iTmp) ? 
206                 writeb(regs |= D7S_FLIP,  d7s_regs): 
207                 writeb(regs &= ~D7S_FLIP, d7s_regs);
208
209         printk("%s: 7-Segment Display%s at 0x%lx %s\n", 
210                D7S_DEVNAME,
211                (0 == iTmp) ? (" (FLIPPED)") : (""),
212                edev->resource[0].start,
213                (0 != sol_compat) ? ("in sol_compat mode") : (""));
214
215         return 0;
216 }
217
218 static void __exit d7s_cleanup(void)
219 {
220         int regs = readb(d7s_regs);
221
222         /* Honor OBP d7s-flipped? unless operating in solaris-compat mode */
223         if (0 == sol_compat) {
224                 (0 == d7s_obpflipped()) ? 
225                         writeb(regs |= D7S_FLIP,  d7s_regs):
226                         writeb(regs &= ~D7S_FLIP, d7s_regs);
227         }
228
229         misc_deregister(&d7s_miscdev);
230         d7s_free();
231 }
232
233 module_init(d7s_init);
234 module_exit(d7s_cleanup);