Linux-2.6.12-rc2
[linux-flexiantxendom0-natty.git] / arch / mips / jmr3927 / rbhma3100 / setup.c
1 /***********************************************************************
2  *
3  * Copyright 2001 MontaVista Software Inc.
4  * Author: MontaVista Software, Inc.
5  *              ahennessy@mvista.com
6  *
7  * Based on arch/mips/ddb5xxx/ddb5477/setup.c
8  *
9  *     Setup file for JMR3927.
10  *
11  * Copyright (C) 2000-2001 Toshiba Corporation
12  *
13  *  This program is free software; you can redistribute  it and/or modify it
14  *  under  the terms of  the GNU General  Public License as published by the
15  *  Free Software Foundation;  either version 2 of the  License, or (at your
16  *  option) any later version.
17  *
18  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
19  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
20  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
21  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
22  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
24  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
25  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
26  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  *
29  *  You should have received a copy of the  GNU General Public License along
30  *  with this program; if not, write  to the Free Software Foundation, Inc.,
31  *  675 Mass Ave, Cambridge, MA 02139, USA.
32  *
33  ***********************************************************************
34  */
35
36 #include <linux/config.h>
37 #include <linux/init.h>
38 #include <linux/kernel.h>
39 #include <linux/kdev_t.h>
40 #include <linux/types.h>
41 #include <linux/sched.h>
42 #include <linux/pci.h>
43 #include <linux/ide.h>
44 #include <linux/ioport.h>
45 #include <linux/param.h>        /* for HZ */
46 #include <linux/delay.h>
47
48 #include <asm/addrspace.h>
49 #include <asm/time.h>
50 #include <asm/bcache.h>
51 #include <asm/irq.h>
52 #include <asm/reboot.h>
53 #include <asm/gdb-stub.h>
54 #include <asm/jmr3927/jmr3927.h>
55 #include <asm/mipsregs.h>
56 #include <asm/traps.h>
57
58 /* Tick Timer divider */
59 #define JMR3927_TIMER_CCD       0       /* 1/2 */
60 #define JMR3927_TIMER_CLK       (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
61
62 unsigned char led_state = 0xf;
63
64 struct {
65     struct resource ram0;
66     struct resource ram1;
67     struct resource pcimem;
68     struct resource iob;
69     struct resource ioc;
70     struct resource pciio;
71     struct resource jmy1394;
72     struct resource rom1;
73     struct resource rom0;
74     struct resource sio0;
75     struct resource sio1;
76 } jmr3927_resources = {
77     { "RAM0",           0,         0x01FFFFFF,  IORESOURCE_MEM },
78     { "RAM1",          0x02000000, 0x03FFFFFF,  IORESOURCE_MEM },
79     { "PCIMEM",        0x08000000, 0x07FFFFFF,  IORESOURCE_MEM },
80     { "IOB",           0x10000000, 0x13FFFFFF                  },
81     { "IOC",           0x14000000, 0x14FFFFFF                  },
82     { "PCIIO",         0x15000000, 0x15FFFFFF                  },
83     { "JMY1394",       0x1D000000, 0x1D3FFFFF                  },
84     { "ROM1",          0x1E000000, 0x1E3FFFFF                  },
85     { "ROM0",          0x1FC00000, 0x1FFFFFFF                  },
86     { "SIO0",          0xFFFEF300, 0xFFFEF3FF                  },
87     { "SIO1",          0xFFFEF400, 0xFFFEF4FF                  },
88 };
89
90 /* don't enable - see errata */
91 int jmr3927_ccfg_toeon = 0;
92
93 static inline void do_reset(void)
94 {
95 #ifdef CONFIG_TC35815
96         extern void tc35815_killall(void);
97         tc35815_killall();
98 #endif
99 #if 1   /* Resetting PCI bus */
100         jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
101         jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
102         (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR);       /* flush WB */
103         mdelay(1);
104         jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
105 #endif
106         jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
107 }
108
109 static void jmr3927_machine_restart(char *command)
110 {
111         local_irq_disable();
112         puts("Rebooting...");
113         do_reset();
114 }
115
116 static void jmr3927_machine_halt(void)
117 {
118         puts("JMR-TX3927 halted.\n");
119         while (1);
120 }
121
122 static void jmr3927_machine_power_off(void)
123 {
124         puts("JMR-TX3927 halted. Please turn off the power.\n");
125         while (1);
126 }
127
128 #define USE_RTC_DS1742
129 #ifdef USE_RTC_DS1742
130 extern void rtc_ds1742_init(unsigned long base);
131 #endif
132 static void __init jmr3927_time_init(void)
133 {
134 #ifdef USE_RTC_DS1742
135         if (jmr3927_have_nvram()) {
136                 rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR);
137         }
138 #endif
139 }
140
141 unsigned long jmr3927_do_gettimeoffset(void);
142 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
143
144 static void __init jmr3927_timer_setup(struct irqaction *irq)
145 {
146         do_gettimeoffset = jmr3927_do_gettimeoffset;
147
148         jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ;
149         jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE;
150         jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD;
151         jmr3927_tmrptr->tcr =
152                 TXx927_TMTCR_TCE | TXx927_TMTCR_CCDE | TXx927_TMTCR_TMODE_ITVL;
153
154         setup_irq(JMR3927_IRQ_TICK, irq);
155 }
156
157 #define USECS_PER_JIFFY (1000000/HZ)
158
159 unsigned long jmr3927_do_gettimeoffset(void)
160 {
161        unsigned long count;
162        unsigned long res = 0;
163
164        /* MUST read TRR before TISR. */
165        count = jmr3927_tmrptr->trr;
166
167        if (jmr3927_tmrptr->tisr & TXx927_TMTISR_TIIS) {
168                /* timer interrupt is pending.  use Max value. */
169                res = USECS_PER_JIFFY - 1;
170        } else {
171                /* convert to usec */
172                /* res = count / (JMR3927_TIMER_CLK / 1000000); */
173                res = (count << 7) / ((JMR3927_TIMER_CLK << 7) / 1000000);
174
175                /*
176                 * Due to possible jiffies inconsistencies, we need to check
177                 * the result so that we'll get a timer that is monotonic.
178                 */
179                if (res >= USECS_PER_JIFFY)
180                        res = USECS_PER_JIFFY-1;
181        }
182
183        return res;
184 }
185
186
187 //#undef DO_WRITE_THROUGH
188 #define DO_WRITE_THROUGH
189 #define DO_ENABLE_CACHE
190
191 extern char * __init prom_getcmdline(void);
192 static void jmr3927_board_init(void);
193 extern struct resource pci_io_resource;
194 extern struct resource pci_mem_resource;
195
196 static void __init jmr3927_setup(void)
197 {
198         char *argptr;
199
200         set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
201
202         board_time_init = jmr3927_time_init;
203         board_timer_setup = jmr3927_timer_setup;
204
205         _machine_restart = jmr3927_machine_restart;
206         _machine_halt = jmr3927_machine_halt;
207         _machine_power_off = jmr3927_machine_power_off;
208
209         /*
210          * IO/MEM resources.
211          */
212         ioport_resource.start = pci_io_resource.start;
213         ioport_resource.end = pci_io_resource.end;
214         iomem_resource.start = pci_mem_resource.start;
215         iomem_resource.end = pci_mem_resource.end;
216
217         /* Reboot on panic */
218         panic_timeout = 180;
219
220         {
221                 unsigned int conf;
222                 conf = read_c0_conf();
223         }
224
225 #if 1
226         /* cache setup */
227         {
228                 unsigned int conf;
229 #ifdef DO_ENABLE_CACHE
230                 int mips_ic_disable = 0, mips_dc_disable = 0;
231 #else
232                 int mips_ic_disable = 1, mips_dc_disable = 1;
233 #endif
234 #ifdef DO_WRITE_THROUGH
235                 int mips_config_cwfon = 0;
236                 int mips_config_wbon = 0;
237 #else
238                 int mips_config_cwfon = 1;
239                 int mips_config_wbon = 1;
240 #endif
241
242                 conf = read_c0_conf();
243                 conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
244                 conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
245                 conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
246                 conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
247                 conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
248
249                 write_c0_conf(conf);
250                 write_c0_cache(0);
251         }
252 #endif
253
254         /* initialize board */
255         jmr3927_board_init();
256
257         argptr = prom_getcmdline();
258
259         if ((argptr = strstr(argptr, "toeon")) != NULL) {
260                         jmr3927_ccfg_toeon = 1;
261         }
262         argptr = prom_getcmdline();
263         if ((argptr = strstr(argptr, "ip=")) == NULL) {
264                 argptr = prom_getcmdline();
265                 strcat(argptr, " ip=bootp");
266         }
267
268 #ifdef CONFIG_TXX927_SERIAL_CONSOLE
269         argptr = prom_getcmdline();
270         if ((argptr = strstr(argptr, "console=")) == NULL) {
271                 argptr = prom_getcmdline();
272                 strcat(argptr, " console=ttyS1,115200");
273         }
274 #endif
275 }
276
277 early_initcall(jmr3927_setup);
278
279
280 static void tx3927_setup(void);
281
282 #ifdef CONFIG_PCI
283 unsigned long mips_pci_io_base;
284 unsigned long mips_pci_io_size;
285 unsigned long mips_pci_mem_base;
286 unsigned long mips_pci_mem_size;
287 /* for legacy I/O, PCI I/O PCI Bus address must be 0 */
288 unsigned long mips_pci_io_pciaddr = 0;
289 #endif
290
291 static void __init jmr3927_board_init(void)
292 {
293         char *argptr;
294
295 #ifdef CONFIG_PCI
296         mips_pci_io_base = JMR3927_PCIIO;
297         mips_pci_io_size = JMR3927_PCIIO_SIZE;
298         mips_pci_mem_base = JMR3927_PCIMEM;
299         mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
300 #endif
301
302         tx3927_setup();
303
304         if (jmr3927_have_isac()) {
305
306 #ifdef CONFIG_FB_E1355
307                 argptr = prom_getcmdline();
308                 if ((argptr = strstr(argptr, "video=")) == NULL) {
309                         argptr = prom_getcmdline();
310                         strcat(argptr, " video=e1355fb:crt16h");
311                 }
312 #endif
313
314 #ifdef CONFIG_BLK_DEV_IDE
315                 /* overrides PCI-IDE */
316 #endif
317         }
318
319         /* SIO0 DTR on */
320         jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
321
322         jmr3927_led_set(0);
323
324
325         if (jmr3927_have_isac())
326                 jmr3927_io_led_set(0);
327         printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
328                jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
329                jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
330                jmr3927_dipsw1(), jmr3927_dipsw2(),
331                jmr3927_dipsw3(), jmr3927_dipsw4());
332         if (jmr3927_have_isac())
333                 printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n",
334                        jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK,
335                        jmr3927_io_dipsw());
336 }
337
338 static void __init tx3927_setup(void)
339 {
340         int i;
341
342         /* SDRAMC are configured by PROM */
343
344         /* ROMC */
345         tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
346         tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
347         tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
348         tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
349
350         /* CCFG */
351         /* enable Timeout BusError */
352         if (jmr3927_ccfg_toeon)
353                 tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
354
355         /* clear BusErrorOnWrite flag */
356         tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
357         /* Disable PCI snoop */
358         tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
359
360 #ifdef DO_WRITE_THROUGH
361         /* Enable PCI SNOOP - with write through only */
362         tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
363 #endif
364
365         /* Pin selection */
366         tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
367         tx3927_ccfgptr->pcfg |=
368                 TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
369                 (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
370
371         printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
372                tx3927_ccfgptr->crir,
373                tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
374
375         /* IRC */
376         /* disable interrupt control */
377         tx3927_ircptr->cer = 0;
378         /* mask all IRC interrupts */
379         tx3927_ircptr->imr = 0;
380         for (i = 0; i < TX3927_NUM_IR / 2; i++) {
381                 tx3927_ircptr->ilr[i] = 0;
382         }
383         /* setup IRC interrupt mode (Low Active) */
384         for (i = 0; i < TX3927_NUM_IR / 8; i++) {
385                 tx3927_ircptr->cr[i] = 0;
386         }
387
388         /* TMR */
389         /* disable all timers */
390         for (i = 0; i < TX3927_NR_TMR; i++) {
391                 tx3927_tmrptr(i)->tcr = TXx927_TMTCR_CRE;
392                 tx3927_tmrptr(i)->tisr = 0;
393                 tx3927_tmrptr(i)->cpra = 0xffffffff;
394                 tx3927_tmrptr(i)->itmr = 0;
395                 tx3927_tmrptr(i)->ccdr = 0;
396                 tx3927_tmrptr(i)->pgmr = 0;
397         }
398
399         /* DMA */
400         tx3927_dmaptr->mcr = 0;
401         for (i = 0; i < sizeof(tx3927_dmaptr->ch) / sizeof(tx3927_dmaptr->ch[0]); i++) {
402                 /* reset channel */
403                 tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
404                 tx3927_dmaptr->ch[i].ccr = 0;
405         }
406         /* enable DMA */
407 #ifdef __BIG_ENDIAN
408         tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
409 #else
410         tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
411 #endif
412
413 #ifdef CONFIG_PCI
414         /* PCIC */
415         printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
416                tx3927_pcicptr->did, tx3927_pcicptr->vid,
417                tx3927_pcicptr->rid);
418         if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
419                 printk("External\n");
420                 /* XXX */
421         } else {
422                 printk("Internal\n");
423
424                 /* Reset PCI Bus */
425                 jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
426                 udelay(100);
427                 jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
428                                     JMR3927_IOC_RESET_ADDR);
429                 udelay(100);
430                 jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
431
432
433                 /* Disable External PCI Config. Access */
434                 tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
435 #ifdef __BIG_ENDIAN
436                 tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
437                         TX3927_PCIC_LBC_TIBSE |
438                         TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
439 #endif
440                 /* LB->PCI mappings */
441                 tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
442                 tx3927_pcicptr->ilbioma = mips_pci_io_base;
443                 tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
444                 tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
445                 tx3927_pcicptr->ilbmma = mips_pci_mem_base;
446                 tx3927_pcicptr->ipbmma = mips_pci_mem_base;
447                 /* PCI->LB mappings */
448                 tx3927_pcicptr->iobas = 0xffffffff;
449                 tx3927_pcicptr->ioba = 0;
450                 tx3927_pcicptr->tlbioma = 0;
451                 tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
452                 tx3927_pcicptr->mba = 0;
453                 tx3927_pcicptr->tlbmma = 0;
454 #ifndef JMR3927_INIT_INDIRECT_PCI
455                 /* Enable Direct mapping Address Space Decoder */
456                 tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
457 #endif
458
459                 /* Clear All Local Bus Status */
460                 tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
461                 /* Enable All Local Bus Interrupts */
462                 tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
463                 /* Clear All PCI Status Error */
464                 tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
465                 /* Enable All PCI Status Error Interrupts */
466                 tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
467
468                 /* PCIC Int => IRC IRQ10 */
469                 tx3927_pcicptr->il = TX3927_IR_PCI;
470 #if 1
471                 /* Target Control (per errata) */
472                 tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
473 #endif
474
475                 /* Enable Bus Arbiter */
476 #if 0
477                 tx3927_pcicptr->req_trace = 0x73737373;
478 #endif
479                 tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
480
481                 tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
482                         PCI_COMMAND_MEMORY |
483 #if 1
484                         PCI_COMMAND_IO |
485 #endif
486                         PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
487         }
488 #endif /* CONFIG_PCI */
489
490         /* PIO */
491         /* PIO[15:12] connected to LEDs */
492         tx3927_pioptr->dir = 0x0000f000;
493         tx3927_pioptr->maskcpu = 0;
494         tx3927_pioptr->maskext = 0;
495         {
496                 unsigned int conf;
497
498         conf = read_c0_conf();
499                if (!(conf & TX39_CONF_ICE))
500                        printk("TX3927 I-Cache disabled.\n");
501                if (!(conf & TX39_CONF_DCE))
502                        printk("TX3927 D-Cache disabled.\n");
503                else if (!(conf & TX39_CONF_WBON))
504                        printk("TX3927 D-Cache WriteThrough.\n");
505                else if (!(conf & TX39_CONF_CWFON))
506                        printk("TX3927 D-Cache WriteBack.\n");
507                else
508                        printk("TX3927 D-Cache WriteBack (CWF) .\n");
509         }
510 }