node's name represents the name of the corresponding LED.
LED sub-node properties:
-- gpios : Should specify the LED's GPIO, see "Specifying GPIO information
- for devices" in Documentation/devicetree/booting-without-of.txt. Active
- low LEDs should be indicated using flags in the GPIO specifier.
+- gpios : Should specify the LED's GPIO, see "gpios property" in
+ Documentation/devicetree/gpio.txt. Active low LEDs should be
+ indicated using flags in the GPIO specifier.
- label : (optional) The label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- linux,default-trigger : (optional) This parameter, if present, is a
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
+picochip Picochip Ltd
powervr Imagination Technologies
qcom Qualcomm, Inc.
ramtron Ramtron International
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
- * IDT TSE2002B3, TS3000B3
- Prefix: 'tse2002b3', 'ts3000b3'
+ * Atmel AT30TS00
+ Prefix: 'at30ts00'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
- http://www.idt.com/products/getdoc.cfm?docid=18715691
- http://www.idt.com/products/getdoc.cfm?docid=18715692
+ http://www.atmel.com/Images/doc8585.pdf
+ * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+ Prefix: 'tse2002', 'ts3000'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+ http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+ http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+ http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
* Maxim MAX6604
Prefix: 'max6604'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
- * Microchip MCP9805, MCP98242, MCP98243, MCP9843
- Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+ * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+ Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
Addresses scanned: I2C 0x18 - 0x1f
Datasheets:
+ http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
Datasheets:
http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+ * ST Microelectronics STTS2002, STTS3000
+ Prefix: 'stts2002', 'stts3000'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+ http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
* JEDEC JC 42.4 compliant temperature sensor chips
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
All ALPS touchpads should respond to the "E6 report" command sequence:
E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
If the E6 report is successful, the touchpad model is identified using the "E7
report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
default: off.
+ printk.always_kmsg_dump=
+ Trigger kmsg_dump for cases other than kernel oops or
+ panics
+ Format: <bool> (1/Y/y=enable, 0/N/n=disable)
+ default: disabled
+
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)
F: drivers/platform/msm/
F: drivers/*/pm8???-*
F: include/linux/mfd/pm8xxx/
-T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
F: include/linux/atm*
ATMEL AT91 MCI DRIVER
-M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 MCI DRIVER
-M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Ludovic Desroches <ludovic.desroches@atmel.com>
S: Maintained
F: drivers/mmc/host/atmel-mci.c
F: drivers/mmc/host/atmel-mci-regs.h
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "+r"(ret), "=&r"(prev), "=&r"(cmp)
- : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
: "memory");
*uval = prev;
config ARCH_U8500
bool "ST-Ericsson U8500 Series"
+ depends on MMU
select CPU_V7
select ARM_AMBA
select GENERIC_CLOCKEVENTS
depends on CPU_V7
help
This option enables the workaround for the 743622 Cortex-A9
- (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+ (r2p*) erratum. Under very rare conditions, a faulty
optimisation in the Cortex-A9 Store Buffer may lead to data
corruption. This workaround sets a specific bit in the diagnostic
register of the Cortex-A9 which disables the Store Buffer
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 350 if ARCH_U8500
+ default 355 if ARCH_U8500
default 0
help
Maximum number of GPIOs in the system.
xipImage
bootpImage
uImage
+*.dtb
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_LPC32XX=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
+CONFIG_CPU_IDLE=y
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_LPC32XX=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PNX=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_PNX4008_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_EXT2_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
u64 armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
- int idx, int overflow);
+ int idx);
int armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
+ vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
- int idx, int overflow)
+ int idx)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
new_raw_count) != prev_raw_count)
goto again;
- new_raw_count &= armpmu->max_period;
- prev_raw_count &= armpmu->max_period;
-
- if (overflow)
- delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
- else
- delta = new_raw_count - prev_raw_count;
+ delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
if (hwc->idx < 0)
return;
- armpmu_event_update(event, hwc, hwc->idx, 0);
+ armpmu_event_update(event, hwc, hwc->idx);
}
static void
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(hwc, hwc->idx);
barrier(); /* why? */
- armpmu_event_update(event, hwc, hwc->idx, 0);
+ armpmu_event_update(event, hwc, hwc->idx);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
- hwc->sample_period = armpmu->max_period;
+ /*
+ * For non-sampling runs, limit the sample_period to half
+ * of the counter width. That way, the new counter value
+ * is far less likely to overtake the previous one unless
+ * you have some serious IRQ latency issues.
+ */
+ hwc->sample_period = armpmu->max_period >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
}
/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+ unsigned long action, void *hcpu)
+{
+ if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+ return NOTIFY_DONE;
+
+ if (cpu_pmu && cpu_pmu->reset)
+ cpu_pmu->reset(NULL);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+ .notifier_call = pmu_cpu_notify,
+};
+
+/*
* CPU PMU identification and registration.
*/
static int __init
pr_info("enabled with %s PMU driver, %d counters available\n",
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
+ register_cpu_notifier(&pmu_cpu_notifier);
armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static int counter_is_active(unsigned long pmcr, int idx)
-{
- unsigned long mask = 0;
- if (idx == ARMV6_CYCLE_COUNTER)
- mask = ARMV6_PMCR_CCOUNT_IEN;
- else if (idx == ARMV6_COUNTER0)
- mask = ARMV6_PMCR_COUNT0_IEN;
- else if (idx == ARMV6_COUNTER1)
- mask = ARMV6_PMCR_COUNT1_IEN;
-
- if (mask)
- return pmcr & mask;
-
- WARN_ONCE(1, "invalid counter number (%d)\n", idx);
- return 0;
-}
-
static irqreturn_t
armv6pmu_handle_irq(int irq_num,
void *dev)
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!counter_is_active(pmcr, idx))
+ /* Ignore if we don't have an event. */
+ if (!event)
continue;
/*
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx, 1);
+ armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+ isb();
+ /* Clear the overflow flag in case an interrupt is pending. */
+ asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+ isb();
+
return idx;
}
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
+ /* Ignore if we don't have an event. */
+ if (!event)
+ continue;
+
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx, 1);
+ armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
+ if (!event)
+ continue;
+
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx, 1);
+ armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+ if (!event)
+ continue;
+
+ if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
continue;
hwc = &event->hw;
- armpmu_event_update(event, hwc, idx, 1);
+ armpmu_event_update(event, hwc, idx);
data.period = event->hw.last_period;
if (!armpmu_event_set_period(event, hwc, idx))
continue;
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
- unsigned long flags, ien, evtsel;
+ unsigned long flags, ien, evtsel, of_flags;
struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
ien &= ~XSCALE2_CCOUNT_INT_EN;
+ of_flags = XSCALE2_CCOUNT_OVERFLOW;
break;
case XSCALE_COUNTER0:
ien &= ~XSCALE2_COUNT0_INT_EN;
evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+ of_flags = XSCALE2_COUNT0_OVERFLOW;
break;
case XSCALE_COUNTER1:
ien &= ~XSCALE2_COUNT1_INT_EN;
evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+ of_flags = XSCALE2_COUNT1_OVERFLOW;
break;
case XSCALE_COUNTER2:
ien &= ~XSCALE2_COUNT2_INT_EN;
evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+ of_flags = XSCALE2_COUNT2_OVERFLOW;
break;
case XSCALE_COUNTER3:
ien &= ~XSCALE2_COUNT3_INT_EN;
evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+ of_flags = XSCALE2_COUNT3_OVERFLOW;
break;
default:
WARN_ONCE(1, "invalid counter number (%d)\n", idx);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
+ xscale2pmu_write_overflow_flags(of_flags);
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
if (freqs.old == freqs.new)
return ret;
- dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
+ dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
freqs.new, relation, &idx);
}
#endif
-int da850_register_pm(struct platform_device *pdev)
+int __init da850_register_pm(struct platform_device *pdev)
{
int ret;
struct davinci_pm_config *pdata = pdev->dev.platform_data;
goto fail;
}
- /* Everything lives on transfer controller 1 until otherwise
- * specified. This way, long transfers on the low priority queue
- * started by the codec engine will not cause audio defects.
- */
for (i = 0; i < edma_cc[j]->num_channels; i++)
- map_dmach_queue(j, i, EVENTQ_1);
+ map_dmach_queue(j, i, info[j]->default_queue);
queue_tc_mapping = info[j]->queue_tc_mapping;
queue_priority_mapping = info[j]->queue_priority_mapping;
unsigned n_slot;
unsigned n_tc;
unsigned n_cc;
+ /*
+ * Default queue is expected to be a low-priority queue.
+ * This way, long transfers on the default queue started
+ * by the codec engine will not cause audio defects.
+ */
enum dma_event_q default_queue;
/* Resource reservation for other cores */
#include <mach/ep93xx_spi.h>
#include <mach/gpio-ep93xx.h>
+#include <asm/hardware/vic.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
.atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
+ .handle_irq = vic_handle_irq,
.timer = &ep93xx_timer,
.init_machine = vision_init_machine,
.restart = ep93xx_restart,
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/mfd/max8998.h>
#include <linux/regulator/machine.h>
.threshold = 0x28,
.voltage = 2800000, /* 2.8V */
.orient = MXT_DIAGONAL,
+ .irqflags = IRQF_TRIGGER_FALLING,
};
static struct i2c_board_info i2c3_devs[] __initdata = {
static struct regulator_consumer_supply cam_consumers[] = {
{
- .dev = NULL,
+ .dev_name = NULL,
.supply = "imx_cam_vcc",
},
};
return __arm_ioremap(phys_addr, size, mtype);
}
-void imx3_init_l2x0(void)
+void __init imx3_init_l2x0(void)
{
void __iomem *l2x0_base;
void __iomem *clkctl_base;
* will also impact the individual peripheral rates.
*/
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include "clock.h"
#include "common.h"
+static DEFINE_SPINLOCK(global_clkregs_lock);
+
static struct clk clk_armpll;
static struct clk clk_usbpll;
-static DEFINE_MUTEX(clkm_lock);
/*
* Post divider values for PLLs based on selected register value
static int local_pll397_enable(struct clk *clk, int enable)
{
u32 reg;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
/* Wait for PLL397 lock */
while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
- (timeout > jiffies))
+ time_before(jiffies, timeout))
cpu_relax();
if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
static int local_oscmain_enable(struct clk *clk, int enable)
{
u32 reg;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
/* Wait for main oscillator to start */
while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
- (timeout > jiffies))
+ time_before(jiffies, timeout))
cpu_relax();
if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
{
u32 reg;
int ret = -ENODEV;
- unsigned long timeout = 1 + msecs_to_jiffies(10);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
/* Wait for PLL lock */
- while ((timeout > jiffies) & (ret == -ENODEV)) {
+ while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
ret = 0;
.enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
};
-static inline void clk_lock(void)
-{
- mutex_lock(&clkm_lock);
-}
-
-static inline void clk_unlock(void)
-{
- mutex_unlock(&clkm_lock);
-}
-
static void local_clk_disable(struct clk *clk)
{
- WARN_ON(clk->usecount == 0);
-
/* Don't attempt to disable clock if it has no users */
if (clk->usecount > 0) {
clk->usecount--;
int clk_enable(struct clk *clk)
{
int ret;
+ unsigned long flags;
- clk_lock();
+ spin_lock_irqsave(&global_clkregs_lock, flags);
ret = local_clk_enable(clk);
- clk_unlock();
+ spin_unlock_irqrestore(&global_clkregs_lock, flags);
return ret;
}
*/
void clk_disable(struct clk *clk)
{
- clk_lock();
+ unsigned long flags;
+
+ spin_lock_irqsave(&global_clkregs_lock, flags);
local_clk_disable(clk);
- clk_unlock();
+ spin_unlock_irqrestore(&global_clkregs_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
*/
unsigned long clk_get_rate(struct clk *clk)
{
- unsigned long rate;
-
- clk_lock();
- rate = clk->get_rate(clk);
- clk_unlock();
-
- return rate;
+ return clk->get_rate(clk);
}
EXPORT_SYMBOL(clk_get_rate);
* the actual rate set as part of the peripheral dividers
* instead of high level clock control
*/
- if (clk->set_rate) {
- clk_lock();
+ if (clk->set_rate)
ret = clk->set_rate(clk, rate);
- clk_unlock();
- }
return ret;
}
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
- clk_lock();
-
if (clk->round_rate)
rate = clk->round_rate(clk, rate);
else
rate = clk->get_rate(clk);
- clk_unlock();
-
return rate;
}
EXPORT_SYMBOL(clk_round_rate);
_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
- _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
- _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+ _REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
+ _REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
- _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+ _REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
*/
extern void lpc32xx_get_uid(u32 devid[4]);
-extern void lpc32xx_watchdog_reset(void);
extern u32 lpc32xx_return_iram_size(void);
/*
/*
* Timer/counter register offsets
*/
-#define LCP32XX_TIMER_IR(x) io_p2v((x) + 0x00)
-#define LCP32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
-#define LCP32XX_TIMER_TC(x) io_p2v((x) + 0x08)
-#define LCP32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
-#define LCP32XX_TIMER_PC(x) io_p2v((x) + 0x10)
-#define LCP32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
-#define LCP32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
-#define LCP32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
-#define LCP32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
-#define LCP32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
-#define LCP32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
-#define LCP32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
-#define LCP32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
-#define LCP32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
-#define LCP32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
-#define LCP32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
-#define LCP32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
+#define LPC32XX_TIMER_IR(x) io_p2v((x) + 0x00)
+#define LPC32XX_TIMER_TCR(x) io_p2v((x) + 0x04)
+#define LPC32XX_TIMER_TC(x) io_p2v((x) + 0x08)
+#define LPC32XX_TIMER_PR(x) io_p2v((x) + 0x0C)
+#define LPC32XX_TIMER_PC(x) io_p2v((x) + 0x10)
+#define LPC32XX_TIMER_MCR(x) io_p2v((x) + 0x14)
+#define LPC32XX_TIMER_MR0(x) io_p2v((x) + 0x18)
+#define LPC32XX_TIMER_MR1(x) io_p2v((x) + 0x1C)
+#define LPC32XX_TIMER_MR2(x) io_p2v((x) + 0x20)
+#define LPC32XX_TIMER_MR3(x) io_p2v((x) + 0x24)
+#define LPC32XX_TIMER_CCR(x) io_p2v((x) + 0x28)
+#define LPC32XX_TIMER_CR0(x) io_p2v((x) + 0x2C)
+#define LPC32XX_TIMER_CR1(x) io_p2v((x) + 0x30)
+#define LPC32XX_TIMER_CR2(x) io_p2v((x) + 0x34)
+#define LPC32XX_TIMER_CR3(x) io_p2v((x) + 0x38)
+#define LPC32XX_TIMER_EMR(x) io_p2v((x) + 0x3C)
+#define LPC32XX_TIMER_CTCR(x) io_p2v((x) + 0x70)
/*
* ir register definitions
*/
-#define LCP32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
-#define LCP32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
+#define LPC32XX_TIMER_CNTR_MTCH_BIT(n) (1 << ((n) & 0x3))
+#define LPC32XX_TIMER_CNTR_CAPT_BIT(n) (1 << (4 + ((n) & 0x3)))
/*
* tcr register definitions
*/
-#define LCP32XX_TIMER_CNTR_TCR_EN 0x1
-#define LCP32XX_TIMER_CNTR_TCR_RESET 0x2
+#define LPC32XX_TIMER_CNTR_TCR_EN 0x1
+#define LPC32XX_TIMER_CNTR_TCR_RESET 0x2
/*
* mcr register definitions
*/
-#define LCP32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
-#define LCP32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
-#define LCP32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
+#define LPC32XX_TIMER_CNTR_MCR_MTCH(n) (0x1 << ((n) * 3))
+#define LPC32XX_TIMER_CNTR_MCR_RESET(n) (0x1 << (((n) * 3) + 1))
+#define LPC32XX_TIMER_CNTR_MCR_STOP(n) (0x1 << (((n) * 3) + 2))
/*
* Standard UART register offsets
#define LPC32XX_GPIO_P1_MUX_SET _GPREG(0x130)
#define LPC32XX_GPIO_P1_MUX_CLR _GPREG(0x134)
#define LPC32XX_GPIO_P1_MUX_STATE _GPREG(0x138)
+#define LPC32XX_GPIO_P2_MUX_SET _GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR _GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE _GPREG(0x030)
#endif
};
static struct platform_device *phy3250_devs[] __initdata = {
+ &lpc32xx_rtc_device,
+ &lpc32xx_tsc_device,
&lpc32xx_i2c0_device,
&lpc32xx_i2c1_device,
&lpc32xx_i2c2_device,
/*
* LPC32XX CPU and system power management
*
- * The LCP32XX has three CPU modes for controlling system power: run,
+ * The LPC32XX has three CPU modes for controlling system power: run,
* direct-run, and halt modes. When switching between halt and run modes,
* the CPU transistions through direct-run mode. For Linux, direct-run
* mode is not used in normal operation. Halt mode is used when the
static int lpc32xx_clkevt_next_event(unsigned long delta,
struct clock_event_device *dev)
{
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
return 0;
}
* disable the timer to wait for the first call to
* set_next_event().
*/
- __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
break;
case CLOCK_EVT_MODE_UNUSED:
struct clock_event_device *evt = &lpc32xx_clkevt;
/* Clear match */
- __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
- LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+ LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
evt->event_handler(evt);
clkrate = clkrate / clk_get_pclk_div();
/* Initial timer setup */
- __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
- LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
- __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
- LCP32XX_TIMER_CNTR_MCR_STOP(0) |
- LCP32XX_TIMER_CNTR_MCR_RESET(0),
- LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+ LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+ __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
+ LPC32XX_TIMER_CNTR_MCR_STOP(0) |
+ LPC32XX_TIMER_CNTR_MCR_RESET(0),
+ LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
/* Setup tick interrupt */
setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
clockevents_register_device(&lpc32xx_clkevt);
/* Use timer1 as clock source. */
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
- __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
- __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
- LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
- clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+ __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+ __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+ LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+
+ clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
}
/*
* Common low-level hardware init for omap1.
*/
-void omap1_init_early(void)
+void __init omap1_init_early(void)
{
omap_check_revision();
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap15xx()) {
- printk(KERN_ERR "DMA virtual resulotion is not supported "
+ printk(KERN_ERR "DMA virtual resolution is not supported "
"in 1510 mode\n");
BUG();
}
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
-obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
+ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
+obj-y += hwspinlock.o
+endif
obj-y += common-board-devices.o twl-common.o
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
*/
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 4,
+ .deferred = true,
},
{
.mmc = 2,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 7,
+ .deferred = true,
},
{} /* Terminator */
};
*/
mmc[0].gpio_cd = gpio + 0;
mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
if (omap_rev() > OMAP3430_REV_ES1_0)
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
am3517_evm_musb_init();
/* MMC init function */
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
-
+ .deferred = true,
},
{
.mmc = 2,
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
return 0;
}
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
+ omap_hsmmc_init(mmc);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
omap_dm9000_init();
+ omap_hsmmc_init(mmc);
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
*
* @return - void.
*/
-void board_flash_init(struct flash_partitions partition_info[],
+void __init board_flash_init(struct flash_partitions partition_info[],
char chip_sel_board[][GPMC_CS_NUM], int nand_type)
{
u8 cs = 0;
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
/* Get IGEP2 hardware revision */
igep2_get_revision();
+
+ omap_hsmmc_init(mmc);
+
/* Register I2C busses and drivers */
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
-#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
ldp_display_init();
}
#include "mux.h"
-static int slot1_cover_open;
-static int slot2_cover_open;
-static struct device *mmc_device;
-
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
#define TUSB6010_GPIO_INT 58
#define N810_EMMC_VSD_GPIO 23
#define N810_EMMC_VIO_GPIO 9
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
+
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
#ifdef CONFIG_MMC_DEBUG
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = -EINVAL,
+ .deferred = true,
},
{} /* Terminator */
};
{
int r;
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
- omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
+
+ if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+ omap_hsmmc_init(mmc);
+
omap3_beagle_i2c_init();
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
.caps = MMC_CAP_4_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = 63,
+ .deferred = true,
},
#ifdef CONFIG_WL12XX_PLATFORM_DATA
{
int r, lcd_bl_en;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+ omap_mux_init_gpio(63, OMAP_PIN_INPUT);
+ omap_hsmmc_init(mmc);
+
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
return;
}
- omap2_hsmmc_init(board_mmc_info);
+ omap_hsmmc_init(board_mmc_info);
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
.gpio_cd = -EINVAL,
.gpio_wp = 126,
.ext_clock = 0,
+ .deferred = true,
},
{
.mmc = 2,
.gpio_wp = 127,
.ext_clock = 1,
.transceiver = true,
+ .deferred = true,
},
{
.mmc = 3,
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
omap3pandora_mmc[0].gpio_cd = gpio + 0;
omap3pandora_mmc[1].gpio_cd = gpio + 1;
- omap2_hsmmc_init(omap3pandora_mmc);
+ omap_hsmmc_late_init(omap3pandora_mmc);
/* gpio + 13 drives 32kHz buffer for wifi module */
gpio_32khz = gpio + 13;
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+ REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
};
/* ads7846 on SPI and 2 nub controllers on I2C */
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
- .reset_gpio_port[0] = 16,
- .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 16,
.reset_gpio_port[2] = -EINVAL
};
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(omap3pandora_mmc);
omap3pandora_i2c_init();
pandora_wl1251_init();
platform_add_devices(omap3pandora_devices,
static struct omap2_hsmmc_info mmc[] = {
{
- .mmc = 1,
- .caps = MMC_CAP_4_BIT_DATA,
- .gpio_cd = -EINVAL,
- .gpio_wp = 23,
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 23,
+ .deferred = true,
},
{} /* Terminator */
};
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ omap_hsmmc_init(mmc);
+
omap3_stalker_i2c_init();
platform_add_devices(omap3_stalker_devices,
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
+ .deferred = true,
},
{} /* Terminator */
};
static int touchbook_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- if (system_rev >= 0x20 && system_rev <= 0x34301000) {
- omap_mux_init_gpio(23, OMAP_PIN_INPUT);
- mmc[0].gpio_wp = 23;
- } else {
- omap_mux_init_gpio(29, OMAP_PIN_INPUT);
- }
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
pm_power_off = omap3_touchbook_poweroff;
+ if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+ mmc[0].gpio_wp = 23;
+ } else {
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+ }
+ omap_hsmmc_init(mmc);
+
omap3_touchbook_i2c_init();
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
{
struct omap2_hsmmc_info *c;
- omap2_hsmmc_init(controllers);
+ omap_hsmmc_init(controllers);
for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
+ omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
return 0;
}
.default_device = &omap4_panda_dvi_device,
};
-void omap4_panda_display_init(void)
+void __init omap4_panda_display_init(void)
{
int r;
static int overo_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- omap2_hsmmc_init(mmc);
-
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
int ret;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ omap_hsmmc_init(mmc);
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
ARRAY_SIZE(rm680_peripherals_devices));
rm680_i2c_init();
gpmc_onenand_init(board_onenand_data);
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
}
#ifdef CONFIG_OMAP_MUX
partition = omap_mux_get("core");
if (partition)
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_init(mmc);
rx51_charger_init();
}
.caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.power_saving = true,
+ .deferred = true,
},
{
.name = "internal",
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
- omap2_hsmmc_init(mmc);
+ omap_hsmmc_late_init(mmc);
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
+ omap_hsmmc_init(mmc);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
usb_musb_init(NULL);
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/bug.h>
#include <plat/clock.h>
gpio_set_debounce(gpio_pendown, gpio_debounce);
}
- ads7846_config.gpio_pendown = gpio_pendown;
-
spi_bi->bus_num = bus_num;
spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
- if (board_pdata)
+ if (board_pdata) {
+ board_pdata->gpio_pendown = gpio_pendown;
spi_bi->platform_data = board_pdata;
+ } else {
+ ads7846_config.gpio_pendown = gpio_pendown;
+ }
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#define AM35XX_VPFE_PCLK_SW_RST BIT(4)
/*
+ * CONTROL AM33XX STATUS register
+ */
+#define AM33XX_CONTROL_STATUS 0x040
+
+/*
* CONTROL OMAP STATUS register to identify OMAP3 features
*/
#define OMAP3_CONTROL_OMAP_STATUS 0x044c
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static inline void omap_init_mbox(void)
+static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-static void omap_init_mcpdm(void)
+static void __init omap_init_mcpdm(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
-static void omap_init_dmic(void)
+static void __init omap_init_dmic(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
#include <plat/mcspi.h>
-static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
char *name = "omap2_mcspi";
}
}
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
return 0;
}
-int omap_hdmi_init(enum omap_hdmi_flags flags)
+int __init omap_hdmi_init(enum omap_hdmi_flags flags)
{
if (cpu_is_omap44xx())
omap4_hdmi_mux_pads(flags);
return 0;
}
-static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
return omap4_dsi_mux_pads(dsi_id, lane_mask);
return 0;
}
-static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
omap4_dsi_mux_pads(dsi_id, 0);
dma_stride = OMAP2_DMA_STRIDE;
dma_common_ch_start = CSDP;
- if (cpu_is_omap3630() || cpu_is_omap4430())
+ if (cpu_is_omap3630() || cpu_is_omap44xx())
dma_common_ch_end = CCDN;
else
dma_common_ch_end = CCFN;
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
gpmc_cfg = board_data;
- ret = platform_device_register(&gpmc_smsc911x_regulator);
- if (ret < 0) {
- pr_err("Unable to register smsc911x regulators: %d\n", ret);
- return;
+ if (!gpmc_cfg->id) {
+ ret = platform_device_register(&gpmc_smsc911x_regulator);
+ if (ret < 0) {
+ pr_err("Unable to register smsc911x regulators: %d\n",
+ ret);
+ return;
+ }
}
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
gpmc_write_reg(GPMC_ECC_CONFIG, val);
return 0;
}
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
/**
* gpmc_calculate_ecc - generate non-inverted ecc bytes
gpmc_ecc_used = -EINVAL;
return 0;
}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
}
}
-static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+ struct omap_mmc_platform_data *mmc)
{
char *hc_name;
}
static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+ struct platform_device *pdev;
+ struct omap_mmc_platform_data *mmc_pdata;
+ int res;
+
+ if (omap_hsmmc_done != 1)
+ return;
+
+ omap_hsmmc_done++;
+
+ for (; c->mmc; c++) {
+ if (!c->deferred)
+ continue;
+
+ pdev = c->pdev;
+ if (!pdev)
+ continue;
+
+ mmc_pdata = pdev->dev.platform_data;
+ if (!mmc_pdata)
+ continue;
+
+ mmc_pdata->slots[0].switch_pin = c->gpio_cd;
+ mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+
+ res = omap_device_register(pdev);
+ if (res)
+ pr_err("Could not late init MMC %s\n",
+ c->name);
+ }
+}
+
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
-void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+ int ctrl_nr)
{
struct omap_hwmod *oh;
+ struct omap_hwmod *ohs[1];
+ struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
- int l;
+ int res;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
- goto done;
+ return;
}
- if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
- pr_err("%s fails!\n", __func__);
- goto done;
- }
+ res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+ if (res < 0)
+ goto free_mmc;
+
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
-
- l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
- WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+ WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
"String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up %s\n", oh_name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ goto free_name;
}
-
+ ohs[0] = oh;
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), NULL, 0, false);
- if (IS_ERR(pdev)) {
- WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
- kfree(mmc_data->slots[0].name);
- goto done;
+ pdev = platform_device_alloc(name, ctrl_nr - 1);
+ if (!pdev) {
+ pr_err("Could not allocate pdev for %s\n", name);
+ goto free_name;
}
- /*
- * return device handle to board setup code
- * required to populate for regulator framework structure
- */
- hsmmcinfo->dev = &pdev->dev;
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+
+ od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+ if (!od) {
+ pr_err("Could not allocate od for %s\n", name);
+ goto put_pdev;
+ }
+
+ res = platform_device_add_data(pdev, mmc_data,
+ sizeof(struct omap_mmc_platform_data));
+ if (res) {
+ pr_err("Could not add pdata for %s\n", name);
+ goto put_pdev;
+ }
+
+ hsmmcinfo->pdev = pdev;
+
+ if (hsmmcinfo->deferred)
+ goto free_mmc;
+
+ res = omap_device_register(pdev);
+ if (res) {
+ pr_err("Could not register od for %s\n", name);
+ goto free_od;
+ }
+
+ goto free_mmc;
+
+free_od:
+ omap_device_delete(od);
+
+put_pdev:
+ platform_device_put(pdev);
+
+free_name:
+ kfree(mmc_data->slots[0].name);
-done:
+free_mmc:
kfree(mmc_data);
}
-void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
}
for (; controllers->mmc; controllers++)
- omap_init_hsmmc(controllers, controllers->mmc);
+ omap_hsmmc_init_one(controllers, controllers->mmc);
}
bool no_off; /* power_saving and power is not to go off */
bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+ bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
- struct device *dev; /* returned: pointer to mmc adapter */
+ struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
/* Remux (pad configuration) when powering on/off */
void (*remux)(struct device *dev, int slot, int power_on);
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
#else
-static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
{
}
if (cpu_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ } else if (cpu_is_am33xx()) {
+ val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
} else if (cpu_is_omap44xx()) {
case 0xb944:
omap_revision = AM335X_REV_ES1_0;
*cpu_rev = "1.0";
+ break;
case 0xb8f2:
switch (rev) {
case 0:
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
-#include "common.h"
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
platform_driver_unregister(&omap2_mbox_driver);
}
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap2_mbox_init);
+module_init(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");
return 0;
}
-static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
int id, count = 1;
char *name = "omap-mcbsp";
static char *omap_mux_options;
-static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
- int gpio, int val)
+static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
+ int gpio, int val)
{
struct omap_mux_entry *e;
struct omap_mux *gpio_mux = NULL;
return 0;
}
-int omap_mux_init_gpio(int gpio, int val)
+int __init omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_partition *partition;
int ret;
return -ENODEV;
}
-static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
- const char *muxname,
- struct omap_mux **found_mux)
+static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
+ const char *muxname,
+ struct omap_mux **found_mux)
{
struct omap_mux *mux = NULL;
struct omap_mux_entry *e;
return -ENODEV;
}
-static int
+static int __init
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
return -ENODEV;
}
-int omap_mux_init_signal(const char *muxname, int val)
+int __init omap_mux_init_signal(const char *muxname, int val)
{
struct omap_mux_partition *partition = NULL;
struct omap_mux *mux = NULL;
* platform-specific code to shutdown a CPU
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void __ref platform_cpu_die(unsigned int cpu)
{
unsigned int this_cpu;
platform_device_put(omap_iommu_pdev[i]);
return err;
}
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{
* @cpu : CPU ID
* @power_state: CPU low power state.
*/
-int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
{
unsigned int cpu_state = 0;
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
__raw_writel(val, sar_base + offset + (idx * 4));
}
-static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
-{
- u8 i;
-
- for (i = 0; i < NR_REG_BANKS; i++)
- wakeupgen_writel(reg, i, cpu);
-}
-
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
unsigned int spi_irq;
wakeupgen_writel(val, i, cpu);
}
-static void _wakeupgen_save_masks(unsigned int cpu)
-{
- u8 i;
-
- for (i = 0; i < NR_REG_BANKS; i++)
- per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
-}
-
-static void _wakeupgen_restore_masks(unsigned int cpu)
-{
- u8 i;
-
- for (i = 0; i < NR_REG_BANKS; i++)
- wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
-}
-
/*
* Architecture specific Mask extension
*/
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+
+static void _wakeupgen_save_masks(unsigned int cpu)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
+}
+
+static void _wakeupgen_restore_masks(unsigned int cpu)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
+}
+
+static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
+{
+ u8 i;
+
+ for (i = 0; i < NR_REG_BANKS; i++)
+ wakeupgen_writel(reg, i, cpu);
+}
+
/*
* Mask or unmask all interrupts on given CPU.
* 0 = Mask all interrupts on the 'cpu'
}
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
+#endif
#ifdef CONFIG_CPU_PM
/*
#include "common.h"
#include "omap4-sar-layout.h"
+#include <linux/export.h>
#ifdef CONFIG_CACHE_L2X0
static void __iomem *l2cache_base;
isb();
}
}
+EXPORT_SYMBOL(omap_bus_sync);
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)
#include <plat/mcspi.h>
#include <plat/mcbsp.h>
#include <plat/mmc.h>
-#include <plat/i2c.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
static struct omap_device_pm_latency *pm_lats;
-static int _init_omap_device(char *name)
+static int __init _init_omap_device(char *name)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
/*
* Build omap_devices for processors and bus.
*/
-static void omap2_init_processor_devices(void)
+static void __init omap2_init_processor_devices(void)
{
_init_omap_device("mpu");
if (omap3_has_iva())
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/bug.h>
#include "pm.h"
#include "cm.h"
#include "cm-regbits-34xx.h"
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/bug.h>
#include <plat/prcm.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/bug.h>
#include "powerdomain.h"
#include <plat/prcm.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/bug.h>
#include <plat/cpu.h>
sr_data->nvalue_count = count;
}
-static int sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
struct platform_device *pdev;
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
- .apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/bug.h>
#include <plat/cpu.h>
vddmin = voltdm->pmic->vp_vddmin;
vddmax = voltdm->pmic->vp_vddmax;
- waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
- sys_clk_rate) / 1000;
+ waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
+ 1000 * voltdm->pmic->slew_rate);
vstepmin = voltdm->pmic->vp_vstepmin;
vstepmax = voltdm->pmic->vp_vstepmax;
#endif
extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
extern struct syscore_ops pxa2xx_mfp_syscore_ops;
extern struct syscore_ops pxa3xx_mfp_syscore_ops;
{
int i;
+ /* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+ pxa_last_gpio = 89;
+#else
+ pxa_last_gpio = 84;
+#endif
for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
{
int i, gpio;
+ pxa_last_gpio = 120; /* running before pxa_gpio_probe() */
for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration
INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
static struct clk_lookup pxa25x_hwuart_clkreg =
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(pxa25x_devices,
INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+ INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
};
#ifdef CONFIG_PM
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa2xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
- register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
return ret;
register_syscore_ops(&pxa_irq_syscore_ops);
- register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_irq = s3c24xx_init_irq,
.init_machine = rx1950_init_machine,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.init_irq = rx3715_init_irq,
.init_machine = rx3715_init_machine,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
.timer = &s3c24xx_timer,
- .restart = s3c2440_restart,
+ .restart = s3c244x_restart,
MACHINE_END
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/pm.h>
-#include <plat/watchdog-reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
}
-
-void s3c2440_restart(char mode, const char *cmd)
-{
- if (mode == 's') {
- soft_restart(0);
- }
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}
#include <plat/pm.h>
#include <plat/pll.h>
#include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
.suspend = s3c244x_suspend,
.resume = s3c244x_resume,
};
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+ if (mode == 's')
+ soft_restart(0);
+
+ arch_wdt_reset();
+
+ /* we'll take a jump through zero as a poor second */
+ soft_restart(0);
+}
default y
select ARM_GIC
select HAS_MTU
- select ARM_ERRATA_753970
+ select PL310_ERRATA_753970
select ARM_ERRATA_754322
select ARM_ERRATA_764369
-
-menu "Ux500 SoC"
+ select CACHE_L2X0
config UX500_SOC_DB5500
- bool "DB5500"
+ bool
select MFD_DB5500_PRCMU
config UX500_SOC_DB8500
- bool "DB8500"
+ bool
select MFD_DB8500_PRCMU
select REGULATOR_DB8500_PRCMU
-
-endmenu
+ select CPU_FREQ_TABLE if CPU_FREQ
menu "Ux500 target platform (boards)"
-config MACH_U8500
- bool "U8500 Development platform"
- depends on UX500_SOC_DB8500
- select TPS6105X
+config MACH_MOP500
+ bool "U8500 Development platform, MOP500 versions"
+ select UX500_SOC_DB8500
+ select I2C
+ select I2C_NOMADIK
help
- Include support for the mop500 development platform.
+ Include support for the MOP500 development platform.
config MACH_HREFV60
- bool "U85000 Development platform, HREFv60 version"
- depends on UX500_SOC_DB8500
- help
- Include support for the HREFv60 new development platform.
+ bool "U8500 Development platform, HREFv60 version"
+ select MACH_MOP500
+ help
+ Include support for the HREFv60 new development platform.
+ Includes HREFv70, v71 etc.
config MACH_SNOWBALL
bool "U8500 Snowball platform"
- depends on UX500_SOC_DB8500
- select MACH_U8500
+ select MACH_MOP500
help
Include support for the snowball development platform.
config MACH_U5500
bool "U5500 Development platform"
- depends on UX500_SOC_DB5500
+ select UX500_SOC_DB5500
help
Include support for the U5500 development platform.
+
+config UX500_AUTO_PLATFORM
+ def_bool y
+ depends on !MACH_U5500
+ select MACH_MOP500
+ help
+ At least one platform needs to be selected in order to build
+ a working kernel. If everything else is disabled, this
+ automatically enables MACH_MOP500.
endmenu
config UX500_DEBUG_UART
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
+obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o \
REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
};
+static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
+ /* AB8500 audio-codec main supply */
+ REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
+ /* AB8500 audio-codec Mic1 supply */
+ REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
+ /* AB8500 audio-codec Mic2 supply */
+ REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
+ /* AB8500 audio-codec DMic supply */
+ REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
+};
+
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
.name = "V-AUD",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
+ .consumer_supplies = ab8500_vaud_consumers,
},
/* supply for v-anamic1 VAMic1-LDO */
[AB8500_LDO_ANAMIC1] = {
.name = "V-AMIC1",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
+ .consumer_supplies = ab8500_vamic1_consumers,
},
/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
[AB8500_LDO_ANAMIC2] = {
.name = "V-AMIC2",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
+ .consumer_supplies = ab8500_vamic2_consumers,
},
/* supply for v-dmic, VDMIC LDO */
[AB8500_LDO_DMIC] = {
.name = "V-DMIC",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
+ .consumer_supplies = ab8500_vdmic_consumers,
},
/* supply for v-intcore12, VINTCORE12 LDO */
[AB8500_LDO_INTCORE] = {
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
};
static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
- .gpio_base = MOP500_AB8500_GPIO(0),
+ .gpio_base = MOP500_AB8500_PIN_GPIO(1),
.irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
/* config_reg is the initial configuration of ab8500 pins.
* The pins can be configured as GPIO or alt functions based
* because the AB8500 GPIO pins are enumbered starting from 1, so the value in
* parens matches the GPIO pin number in the data sheet.
*/
-#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
+#define MOP500_AB8500_PIN_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
}
EXPORT_SYMBOL(clk_set_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ /*TODO*/
+ return -ENOSYS;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
static void clk_prcmu_enable(struct clk *clk)
{
void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
void (*enable) (struct clk *);
void (*disable) (struct clk *);
unsigned long (*get_rate) (struct clk *);
+ int (*set_parent)(struct clk *, struct clk *);
};
/**
[DB8500_DMA_DEV41_SD_MM3_TX] = -1,
[DB8500_DMA_DEV42_SD_MM4_TX] = -1,
[DB8500_DMA_DEV43_SD_MM5_TX] = -1,
+ [DB8500_DMA_DEV14_MSP2_TX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV30_MSP1_TX] = U8500_MSP1_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
};
/* Mapping between source event lines and physical device address */
[DB8500_DMA_DEV41_SD_MM3_RX] = -1,
[DB8500_DMA_DEV42_SD_MM4_RX] = -1,
[DB8500_DMA_DEV43_SD_MM5_RX] = -1,
+ [DB8500_DMA_DEV14_MSP2_RX] = U8500_MSP2_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV30_MSP3_RX] = U8500_MSP3_BASE + MSP_TX_RX_REG_OFFSET,
+ [DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX] = U8500_MSP0_BASE + MSP_TX_RX_REG_OFFSET,
};
/* Reserved event lines for memcpy only */
#include <mach/db8500-regs.h>
#include <mach/db5500-regs.h>
+#define MSP_TX_RX_REG_OFFSET 0
+
#ifndef __ASSEMBLY__
#include <mach/id.h>
/* This will be overridden by board-specific irq headers */
#define IRQ_BOARD_END IRQ_BOARD_START
-#ifdef CONFIG_MACH_U8500
+#ifdef CONFIG_MACH_MOP500
#include <mach/irqs-board-mop500.h>
#endif
select ARM_GIC
select ARM_ERRATA_720789
select ARM_ERRATA_751472
- select ARM_ERRATA_753970
+ select PL310_ERRATA_753970
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#endif
#ifdef CONFIG_ARM_ERRATA_743622
- teq r6, #0x20 @ present in r2p0
- teqne r6, #0x21 @ present in r2p1
- teqne r6, #0x22 @ present in r2p2
+ teq r5, #0x00200000 @ only present in r2p*
mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register
orreq r10, r10, #1 << 6 @ set bit #6
mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register
#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
-#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
-#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
-#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
-#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
#include <linux/io.h>
#include <plat/clock.h>
static struct platform_driver omap_system_dma_driver = {
.probe = omap_system_dma_probe,
- .remove = omap_system_dma_remove,
+ .remove = __devexit_p(omap_system_dma_remove),
.driver = {
.name = "omap_dma_system"
},
static void omap_timer_restore_context(struct omap_dm_timer *timer)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
- timer->context.tiocp_cfg);
- if (timer->revision > 1)
+ __raw_writel(timer->context.tiocp_cfg,
+ timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
+ if (timer->revision == 1)
__raw_writel(timer->context.tistat, timer->sys_stat);
__raw_writel(timer->context.tisr, timer->irq_stat);
__omap_dm_timer_stop(timer, timer->posted, rate);
+ if (timer->loses_context && timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+
+ /*
+ * Since the register values are computed and written within
+ * __omap_dm_timer_stop, we need to use read to retrieve the
+ * context.
+ */
+ timer->context.tclr =
+ omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ timer->context.tisr = __raw_readl(timer->irq_stat);
+ omap_dm_timer_disable(timer);
return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap4430(): True for OMAP4430
* cpu_is_omap3505(): True for OMAP3505
* cpu_is_omap3517(): True for OMAP3517
*/
#define cpu_is_omap3505() 0
#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
-#define cpu_is_omap4430() 0
#define cpu_is_omap3630() 0
/*
#define OMAP_GPMC_NR_IRQS 8
#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS 64
+#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END
+#endif
-#define NR_IRQS OMAP_GPMC_IRQ_END
+#define NR_IRQS OMAP_PRCM_IRQ_END
#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+void omap_device_delete(struct omap_device *od);
+int omap_device_register(struct platform_device *pdev);
+
void __iomem *omap_device_get_rt_va(struct omap_device *od);
struct device *omap_device_get_by_hwmod_name(const char *oh_name);
#else
#define OMAP4_SRAM_PA 0x40300000
#endif
+#define AM33XX_SRAM_PA 0x40300000
#endif
if (!--mbox->use_count) {
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
- flush_work_sync(&mbox->rxq->work);
+ flush_work_sync(&mbox->rxq->work);
mbox_queue_free(mbox->txq);
mbox_queue_free(mbox->rxq);
}
+
/*
* omap_device implementation
*
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
-static int omap_device_register(struct platform_device *pdev);
static int omap_early_device_register(struct platform_device *pdev);
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
- struct omap_hwmod **ohs, int oh_cnt,
- struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt);
-static void omap_device_delete(struct omap_device *od);
-
static struct omap_device_pm_latency omap_default_latency[] = {
{
*
* Returns an struct omap_device pointer or ERR_PTR() on error;
*/
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
return ERR_PTR(ret);
}
-static void omap_device_delete(struct omap_device *od)
+void omap_device_delete(struct omap_device *od)
{
if (!od)
return;
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-static int omap_early_device_register(struct platform_device *pdev)
+static int __init omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-static int omap_device_register(struct platform_device *pdev)
+int omap_device_register(struct platform_device *pdev)
{
pr_debug("omap_device: %s: registering\n", pdev->name);
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
omap_sram_size = 0x800; /* 2K */
}
} else {
- if (cpu_is_omap34xx()) {
+ if (cpu_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
return 0;
}
+static inline int am33xx_sram_init(void)
+{
+ return 0;
+}
+
int __init omap_sram_init(void)
{
omap_detect_sram();
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
+ else if (cpu_is_am33xx())
+ am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
int channel;
- for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+ for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
s3c2410_dma_resume_chan(cp);
}
#ifdef CONFIG_S3C_DEV_USB_HSOTG
static struct resource s3c_usb_hsotg_resources[] = {
- [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+ [0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
[1] = DEFINE_RES_IRQ(IRQ_OTG),
};
static int clockevent_next_event(unsigned long cycles,
struct clock_event_device *clk_event_dev)
{
- u16 val;
+ u16 val = readw(gpt_base + CR(CLKEVT));
+
+ if (val & CTRL_ENABLE)
+ writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
writew(cycles, gpt_base + LOAD(CLKEVT));
- val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));
extern unsigned long get_wchan(struct task_struct *p);
-#define KSTK_EIP(tsk) (task_pt_regs(task)->pc)
-#define KSTK_ESP(tsk) (task_pt_regs(task)->sp)
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#define cpu_relax() do { } while (0)
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
- cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
+ cd->min_delta_ns = clockevent_delta2ns(9, cd); /* ~0.28ms */
clockevents_register_device(cd);
setup_irq(m2int, &au1x_rtcmatch2_irqaction);
{
if (soc_is_ar913x())
ar913x_wmac_setup();
- if (soc_is_ar933x())
+ else if (soc_is_ar933x())
ar933x_wmac_setup();
else
BUG();
# CONFIG_SECCOMP is not set
CONFIG_USE_OF=y
CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_CGROUPS=y
CONFIG_NAMESPACES=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_LZMA=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_KEXEC=y
CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NAMESPACES=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_INITRAMFS_COMPRESSION_GZIP=y
CONFIG_PREEMPT=y
# CONFIG_SECCOMP is not set
CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=16
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
+struct gpio;
+struct gpio_chip;
+
/* with the current GPIC design, up to 128 GPIOs are possible.
* The only implementation so far is in the Au1300, which has 75 externally
* available GPIOs.
return 0;
}
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+ unsigned long flags, const char *label)
+{
+ return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
{
}
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
#else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-# define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
#define HPAGE_SHIFT ({BUILD_BUG(); 0; })
#define HPAGE_SIZE ({BUILD_BUG(); 0; })
#define HPAGE_MASK ({BUILD_BUG(); 0; })
* SMP support for BMIPS
*/
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
printk(KERN_DEBUG "YIELD Scheduler Exception\n");
break;
case 5:
- printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+ printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
break;
default:
printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
RODATA
/* writeable */
- _sdata = .; /* Start of data section */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
const int field = sizeof(unsigned long) * 2;
siginfo_t info;
int fault;
+ unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+ (write ? FAULT_FLAG_WRITE : 0);
#if 0
printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
if (in_atomic() || !mm)
goto bad_area_nosemaphore;
+retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
- fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+ fault = handle_mm_fault(mm, vma, address, flags);
+
+ if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+ return;
+
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR) {
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
- tsk->maj_flt++;
- } else {
- perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
- tsk->min_flt++;
+ if (flags & FAULT_FLAG_ALLOW_RETRY) {
+ if (fault & VM_FAULT_MAJOR) {
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+ regs, address);
+ tsk->maj_flt++;
+ } else {
+ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+ regs, address);
+ tsk->min_flt++;
+ }
+ if (fault & VM_FAULT_RETRY) {
+ flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+ /*
+ * No need to up_read(&mm->mmap_sem) as we would
+ * have already released it in __lock_page_or_retry
+ * in mm/filemap.c.
+ */
+
+ goto retry;
+ }
}
up_read(&mm->mmap_sem);
{
/* Propagate hose info into the subordinate devices. */
- struct list_head *ln;
struct pci_dev *dev = bus->self;
if (pci_probe_only && dev &&
pcibios_fixup_device_resources(dev, bus);
}
- for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
- dev = pci_dev_b(ln);
-
+ list_for_each_entry(dev, &bus->devices, bus_list) {
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
pcibios_fixup_device_resources(dev, bus);
}
*/
void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
{
- struct pci_bus *current_bus = bus;
- struct pci_dev *devices;
- struct list_head *devices_link;
-
- list_for_each(devices_link, &(current_bus->devices)) {
- devices = pci_dev_b(devices_link);
- if (devices == NULL)
- continue;
- }
-
/*
* PLX and SPKT related changes go here
*/
break;
}
dev->id = i;
- dev->dev = &tx_7segled_subsys;
+ dev->bus = &tx_7segled_subsys;
error = device_register(dev);
if (!error) {
device_create_file(dev, &dev_attr_ascii);
current->mm->free_area_cache = TASK_UNMAPPED_BASE;
current->mm->cached_hole_size = 0;
+ retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+ if (retval < 0) {
+ /* Someone check-me: is this error path enough? */
+ send_sig(SIGKILL, current, 0);
+ return retval;
+ }
+
install_exec_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
set_brk(current->mm->start_brk, current->mm->brk);
- retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
- if (retval < 0) {
- /* Someone check-me: is this error path enough? */
- send_sig(SIGKILL, current, 0);
- return retval;
- }
-
current->mm->start_stack =
(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
/* start thread */
}
/* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
{
- unsigned long bclock, now;
+ u32 bclock, now, loops = __loops;
int cpu;
preempt_disable();
* Lookup failure means no vma is above this address,
* i.e. return with success:
*/
- if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+ vma = find_vma(mm, addr);
+ if (!vma)
return addr;
/*
* new region fits between prev_vma->vm_end and
* vma->vm_start, use it:
*/
+ prev_vma = vma->vm_prev;
if (addr + len <= vma->vm_start &&
(!prev_vma || (addr >= prev_vma->vm_end))) {
/* remember the address as a hint for next time */
DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
},
},
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+ {
+ .callback = set_use_crs,
+ .ident = "MSI MS-7253",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ },
+ },
/* Now for the blacklist.. */
int i;
struct resource *res, *root, *conflict;
- if (!pci_use_crs)
- return;
-
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
- add_resources(&info);
- return;
+ if (pci_use_crs) {
+ add_resources(&info);
+
+ return;
+ }
+
+ kfree(info.name);
name_alloc_fail:
kfree(info.res);
bio.bi_size = size;
bio.bi_bdev = bdev;
bio.bi_sector = 0;
- bio.bi_flags = BIO_QUIET;
+ bio.bi_flags = (1 << BIO_QUIET);
init_completion(&complete);
bio.bi_private = &complete;
bio.bi_end_io = floppy_rb0_complete;
cdv_get_core_freq(dev);
gma_intel_opregion_init(dev);
psb_intel_init_bios(dev);
+ REG_WRITE(PORT_HOTPLUG_EN, 0);
+ REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
return 0;
}
.fb_imageblit = cfb_imageblit,
.fb_pan_display = psbfb_pan,
.fb_mmap = psbfb_mmap,
- .fb_sync = psbfb_sync,
.fb_ioctl = psbfb_ioctl,
};
pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
>> PAGE_SHIFT;
- /* Some CDV firmware doesn't report this currently. In which case the
- system has 64 gtt pages */
+ /* CDV doesn't report this. In which case the system has 64 gtt pages */
if (pg->gtt_start == 0 || gtt_pages == 0) {
- dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+ dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
gtt_pages = 64;
pg->gtt_start = dev_priv->pge_ctl;
}
if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
static struct resource fudge; /* Preferably peppermint */
- /* This can occur on CDV SDV systems. Fudge it in this case.
+ /* This can occur on CDV systems. Fudge it in this case.
We really don't care what imaginary space is being allocated
at this point */
- dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+ dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
pg->gatt_start = 0x40000000;
pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
/* This is a little confusing but in fact the GTT is providing
uint64_t addr = semaphore->gpu_addr;
unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL;
+ if (rdev->family < CHIP_CAYMAN)
+ sel |= PACKET3_SEM_WAIT_ON_SIGNAL;
+
radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1));
radeon_ring_write(ring, addr & 0xffffffff);
radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);
0x00000000, /* VGT_VTX_CNT_EN */
0xc0016900,
+ 0x000000d4,
+ 0x00000000, /* SX_MISC */
+
+ 0xc0016900,
0x000002c8,
0x00000000, /* VGT_STRMOUT_BUFFER_EN */
0x00000000, /* VGT_VTX_CNT_EN */
0xc0016900,
+ 0x000000d4,
+ 0x00000000, /* SX_MISC */
+
+ 0xc0016900,
0x000002c8,
0x00000000, /* VGT_STRMOUT_BUFFER_EN */
#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34
#define PACKET3_INDIRECT_BUFFER_MP 0x38
#define PACKET3_MEM_SEMAPHORE 0x39
+# define PACKET3_SEM_WAIT_ON_SIGNAL (0x1 << 12)
# define PACKET3_SEM_SEL_SIGNAL (0x6 << 29)
# define PACKET3_SEM_SEL_WAIT (0x7 << 29)
#define PACKET3_MPEG_INDEX 0x3A
(radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
return MODE_OK;
else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
- if (ASIC_IS_DCE3(rdev)) {
+ if (0) {
/* HDMI 1.3+ supports max clock of 340 Mhz */
if (mode->clock > 340000)
return MODE_CLOCK_HIGH;
.create_handle = radeon_user_framebuffer_create_handle,
};
-void
+int
radeon_framebuffer_init(struct drm_device *dev,
struct radeon_framebuffer *rfb,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_gem_object *obj)
{
+ int ret;
rfb->obj = obj;
- drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+ ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+ if (ret) {
+ rfb->obj = NULL;
+ return ret;
+ }
drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd);
+ return 0;
}
static struct drm_framebuffer *
{
struct drm_gem_object *obj;
struct radeon_framebuffer *radeon_fb;
+ int ret;
obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]);
if (obj == NULL) {
if (radeon_fb == NULL)
return ERR_PTR(-ENOMEM);
- radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+ ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+ if (ret) {
+ kfree(radeon_fb);
+ drm_gem_object_unreference_unlocked(obj);
+ return NULL;
+ }
return &radeon_fb->base;
}
bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
u32 pixel_clock)
{
- struct drm_device *dev = encoder->dev;
- struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *dig_connector;
case DRM_MODE_CONNECTOR_HDMIB:
if (radeon_connector->use_digital) {
/* HDMI 1.3 supports up to 340 Mhz over single link */
- if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+ if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (pixel_clock > 340000)
return true;
else
return false;
else {
/* HDMI 1.3 supports up to 340 Mhz over single link */
- if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+ if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
if (pixel_clock > 340000)
return true;
else
sizes->surface_depth);
ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj);
+ if (ret) {
+ DRM_ERROR("failed to create fbcon object %d\n", ret);
+ return ret;
+ }
+
rbo = gem_to_radeon_bo(gobj);
/* okay we have an object now allocate the framebuffer */
info->par = rfbdev;
- radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+ ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+ if (ret) {
+ DRM_ERROR("failed to initalise framebuffer %d\n", ret);
+ goto out_unref;
+ }
fb = &rfbdev->rfb.base;
u16 blue, int regno);
extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, int regno);
-void radeon_framebuffer_init(struct drm_device *dev,
+int radeon_framebuffer_init(struct drm_device *dev,
struct radeon_framebuffer *rfb,
struct drm_mode_fb_cmd2 *mode_cmd,
struct drm_gem_object *obj);
#define USB_VENDOR_ID_AIRCABLE 0x16CA
#define USB_DEVICE_ID_AIRCABLE1 0x1502
+#define USB_VENDOR_ID_AIREN 0x1a2c
+#define USB_DEVICE_ID_AIREN_SLIMPLUS 0x0002
+
#define USB_VENDOR_ID_ALCOR 0x058f
#define USB_DEVICE_ID_ALCOR_USBRS232 0x9720
return;
}
- /* Ignore out-of-range values as per HID specification, section 5.10 */
- if (value < field->logical_minimum || value > field->logical_maximum) {
+ /*
+ * Ignore out-of-range values as per HID specification,
+ * section 5.10 and 6.2.25
+ */
+ if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+ (value < field->logical_minimum ||
+ value > field->logical_maximum)) {
dbg_hid("Ignoring out-of-range value %x\n", value);
return;
}
{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
If you say yes here, you get support for JEDEC JC42.4 compliant
temperature sensors, which are used on many DDR3 memory modules for
mobile devices and servers. Support will include, but not be limited
- to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
- MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
+ to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
+ MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
+ STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
This driver can also be built as a module. If so, the module
will be called jc42.
/* Manufacturer IDs */
#define ADT_MANID 0x11d4 /* Analog Devices */
+#define ATMEL_MANID 0x001f /* Atmel */
#define MAX_MANID 0x004d /* Maxim */
#define IDT_MANID 0x00b3 /* IDT */
#define MCP_MANID 0x0054 /* Microchip */
#define ADT7408_DEVID 0x0801
#define ADT7408_DEVID_MASK 0xffff
+/* Atmel */
+#define AT30TS00_DEVID 0x8201
+#define AT30TS00_DEVID_MASK 0xffff
+
/* IDT */
#define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */
#define TS3000B3_DEVID_MASK 0xffff
+#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */
+#define TS3000GB2_DEVID_MASK 0xffff
+
/* Maxim */
#define MAX6604_DEVID 0x3e00
#define MAX6604_DEVID_MASK 0xffff
/* Microchip */
+#define MCP9804_DEVID 0x0200
+#define MCP9804_DEVID_MASK 0xfffc
+
#define MCP98242_DEVID 0x2000
#define MCP98242_DEVID_MASK 0xfffc
#define STTS424E_DEVID 0x0000
#define STTS424E_DEVID_MASK 0xfffe
+#define STTS2002_DEVID 0x0300
+#define STTS2002_DEVID_MASK 0xffff
+
+#define STTS3000_DEVID 0x0200
+#define STTS3000_DEVID_MASK 0xffff
+
static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
struct jc42_chips {
static struct jc42_chips jc42_chips[] = {
{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
+ { ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
+ { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK },
{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
+ { MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
+ { STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
+ { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
};
/* Each client has this additional data */
static const struct i2c_device_id jc42_id[] = {
{ "adt7408", 0 },
+ { "at30ts00", 0 },
{ "cat94ts02", 0 },
{ "cat6095", 0 },
{ "jc42", 0 },
{ "max6604", 0 },
+ { "mcp9804", 0 },
{ "mcp9805", 0 },
{ "mcp98242", 0 },
{ "mcp98243", 0 },
{ "se97b", 0 },
{ "se98", 0 },
{ "stts424", 0 },
- { "tse2002b3", 0 },
- { "ts3000b3", 0 },
+ { "stts2002", 0 },
+ { "stts3000", 0 },
+ { "tse2002", 0 },
+ { "ts3000", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, jc42_id);
lcrit_alarm, crit_alarm */
#define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm,
crit_alarm */
-#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */
+#define PMBUS_POUT_BOOLEANS_PER_PAGE 3 /* cap_alarm, alarm, crit_alarm
+ */
#define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */
#define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm,
lcrit_alarm, crit_alarm */
struct zl6100_data {
int id;
ktime_t access; /* chip access time */
+ int delay; /* Delay between chip accesses in uS */
struct pmbus_driver_info info;
};
/* Some chips need a delay between accesses */
static inline void zl6100_wait(const struct zl6100_data *data)
{
- if (delay) {
+ if (data->delay) {
s64 delta = ktime_us_delta(ktime_get(), data->access);
- if (delta < delay)
- udelay(delay - delta);
+ if (delta < data->delay)
+ udelay(data->delay - delta);
}
}
* can be cleared later for additional chips if tests show that it
* is not needed (in other words, better be safe than sorry).
*/
+ data->delay = delay;
if (data->id == zl2004 || data->id == zl6105)
- delay = 0;
+ data->delay = 0;
/*
* Since there was a direct I2C device access above, wait before
struct evdev_client *client = file->private_data;
struct evdev *evdev = client->evdev;
struct input_event event;
- int retval;
+ int retval = 0;
if (count < input_event_size())
return -EINVAL;
}
/*** Module ***/
-#if CONFIG_PM
+#if CONFIG_PM_SLEEP
static int twl4030_vibra_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
vibra_disable_leds();
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
twl4030_vibra_suspend, twl4030_vibra_resume);
-#endif
static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
{
.driver = {
.name = "twl4030-vibra",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &twl4030_vibra_pm_ops,
-#endif
},
};
module_platform_driver(twl4030_vibra_driver);
/*
* First try "E6 report".
- * ALPS should return 0,0,10 or 0,0,100
+ * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
+ * The bits 0-2 of the first byte will be 1s if some buttons are
+ * pressed.
*/
param[0] = 0;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
param[0], param[1], param[2]);
- if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
+ if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
+ (param[2] != 10 && param[2] != 100))
return NULL;
/*
tristate "Wacom Intuos/Graphire tablet support (USB)"
depends on USB_ARCH_HAS_HCD
select USB
+ select NEW_LEDS
+ select LEDS_CLASS
help
Say Y here if you want to use the USB version of the Wacom Intuos
or Graphire tablet. Make sure to say Y to "Mouse support"
{
struct input_dev *input = wacom->input;
unsigned char *data = wacom->data;
- int count = data[1] & 0x03;
+ int count = data[1] & 0x07;
int i;
if (data[0] != 0x02)
}
/* Programs the physical address of the device table into the IOMMU hardware */
-static void __init iommu_set_device_table(struct amd_iommu *iommu)
+static void iommu_set_device_table(struct amd_iommu *iommu)
{
u64 entry;
* Corrupt successful READs while in down state.
* If flags were specified, only corrupt those that match.
*/
- if (!error && bio_submitted_while_down &&
+ if (fc->corrupt_bio_byte && !error && bio_submitted_while_down &&
(bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) &&
all_corrupt_bio_flags_match(bio, fc))
corrupt_bio_data(bio, fc);
unsigned offset;
unsigned num_bvecs;
sector_t remaining = where->count;
+ struct request_queue *q = bdev_get_queue(where->bdev);
+ sector_t discard_sectors;
/*
* where->count may be zero if rw holds a flush and we need to
/*
* Allocate a suitably sized-bio.
*/
- num_bvecs = dm_sector_div_up(remaining,
- (PAGE_SIZE >> SECTOR_SHIFT));
- num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs);
+ if (rw & REQ_DISCARD)
+ num_bvecs = 1;
+ else
+ num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev),
+ dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT)));
+
bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
bio->bi_sector = where->sector + (where->count - remaining);
bio->bi_bdev = where->bdev;
bio->bi_destructor = dm_bio_destructor;
store_io_and_region_in_bio(bio, io, region);
- /*
- * Try and add as many pages as possible.
- */
- while (remaining) {
+ if (rw & REQ_DISCARD) {
+ discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining);
+ bio->bi_size = discard_sectors << SECTOR_SHIFT;
+ remaining -= discard_sectors;
+ } else while (remaining) {
+ /*
+ * Try and add as many pages as possible.
+ */
dp->get_page(dp, &page, &len, &offset);
len = min(len, to_bytes(remaining));
if (!bio_add_page(bio, page, len, offset))
if (!argc) {
DMWARN("Empty message received.");
- goto out;
+ goto out_argv;
}
table = dm_get_live_table(md);
return ret;
sb = page_address(rdev->sb_page);
- if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) {
+
+ /*
+ * Two cases that we want to write new superblocks and rebuild:
+ * 1) New device (no matching magic number)
+ * 2) Device specified for rebuild (!In_sync w/ offset == 0)
+ */
+ if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) ||
+ (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) {
super_sync(rdev->mddev, rdev);
set_bit(FirstUse, &rdev->flags);
*/
rdev_for_each(r, t, mddev) {
if (!test_bit(In_sync, &r->flags)) {
- if (!test_bit(FirstUse, &r->flags))
- DMERR("Superblock area of "
- "rebuild device %d should have been "
- "cleared.", r->raid_disk);
- set_bit(FirstUse, &r->flags);
+ DMINFO("Device %d specified for rebuild: "
+ "Clearing superblock", r->raid_disk);
rebuilds++;
} else if (test_bit(FirstUse, &r->flags))
new_devs++;
INIT_WORK(&rs->md.event_work, do_table_event);
ti->private = rs;
+ ti->num_flush_requests = 1;
mutex_lock(&rs->md.reconfig_mutex);
ret = md_run(&rs->md);
data_sm = dm_sm_disk_create(tm, nr_blocks);
if (IS_ERR(data_sm)) {
DMERR("sm_disk_create failed");
+ dm_tm_unlock(tm, sblock);
r = PTR_ERR(data_sm);
goto bad;
}
return 0;
}
+/*
+ * __open_device: Returns @td corresponding to device with id @dev,
+ * creating it if @create is set and incrementing @td->open_count.
+ * On failure, @td is undefined.
+ */
static int __open_device(struct dm_pool_metadata *pmd,
dm_thin_id dev, int create,
struct dm_thin_device **td)
struct disk_device_details details_le;
/*
- * Check the device isn't already open.
+ * If the device is already open, return it.
*/
list_for_each_entry(td2, &pmd->thin_devices, list)
if (td2->id == dev) {
+ /*
+ * May not create an already-open device.
+ */
+ if (create)
+ return -EEXIST;
+
td2->open_count++;
*td = td2;
return 0;
if (r != -ENODATA || !create)
return r;
+ /*
+ * Create new device.
+ */
changed = 1;
details_le.mapped_blocks = 0;
details_le.transaction_id = cpu_to_le64(pmd->trans_id);
r = __open_device(pmd, dev, 1, &td);
if (r) {
- __close_device(td);
dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
dm_btree_del(&pmd->bl_info, dev_root);
return r;
}
- td->changed = 1;
__close_device(td);
return r;
goto bad;
r = __set_snapshot_details(pmd, td, origin, pmd->time);
+ __close_device(td);
+
if (r)
goto bad;
- __close_device(td);
return 0;
bad:
- __close_device(td);
dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
dm_btree_remove(&pmd->details_info, pmd->details_root,
&key, &pmd->details_root);
if (r)
return r;
+ td->mapped_blocks--;
+ td->changed = 1;
pmd->need_commit = 1;
return 0;
return 1;
rcu_read_lock();
- for (i = 0; i < conf->raid_disks; i++) {
+ for (i = 0; i < conf->raid_disks * 2; i++) {
struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)) {
struct request_queue *q = bdev_get_queue(rdev->bdev);
static void allow_barrier(struct r10conf *conf);
static void lower_barrier(struct r10conf *conf);
+static int enough(struct r10conf *conf, int ignore);
static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
{
* wait for the 'master' bio.
*/
set_bit(R10BIO_Uptodate, &r10_bio->state);
+ } else {
+ /* If all other devices that store this block have
+ * failed, we want to return the error upwards rather
+ * than fail the last device. Here we redefine
+ * "uptodate" to mean "Don't want to retry"
+ */
+ unsigned long flags;
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (!enough(conf, rdev->raid_disk))
+ uptodate = 1;
+ spin_unlock_irqrestore(&conf->device_lock, flags);
+ }
+ if (uptodate) {
raid_end_bio_io(r10_bio);
rdev_dec_pending(rdev, conf->mddev);
} else {
"md/raid10:%s: %s: Failing raid device\n",
mdname(mddev), b);
md_error(mddev, conf->mirrors[d].rdev);
+ r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
return;
}
rdev,
r10_bio->devs[r10_bio->read_slot].addr
+ sect,
- s, 0))
+ s, 0)) {
md_error(mddev, rdev);
+ r10_bio->devs[r10_bio->read_slot].bio
+ = IO_BLOCKED;
+ }
break;
}
* This is all done synchronously while the array is
* frozen.
*/
+ bio = r10_bio->devs[slot].bio;
+ bdevname(bio->bi_bdev, b);
+ bio_put(bio);
+ r10_bio->devs[slot].bio = NULL;
+
if (mddev->ro == 0) {
freeze_array(conf);
fix_read_error(conf, mddev, r10_bio);
unfreeze_array(conf);
- }
+ } else
+ r10_bio->devs[slot].bio = IO_BLOCKED;
+
rdev_dec_pending(rdev, mddev);
- bio = r10_bio->devs[slot].bio;
- bdevname(bio->bi_bdev, b);
- r10_bio->devs[slot].bio =
- mddev->ro ? IO_BLOCKED : NULL;
read_more:
rdev = read_balance(conf, r10_bio, &max_sectors);
if (rdev == NULL) {
mdname(mddev), b,
(unsigned long long)r10_bio->sector);
raid_end_bio_io(r10_bio);
- bio_put(bio);
return;
}
do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC);
- if (bio)
- bio_put(bio);
slot = r10_bio->read_slot;
printk_ratelimited(
KERN_ERR
mbio->bi_phys_segments++;
spin_unlock_irq(&conf->device_lock);
generic_make_request(bio);
- bio = NULL;
r10_bio = mempool_alloc(conf->r10bio_pool,
GFP_NOIO);
disk->rdev = rdev;
}
- disk->rdev = rdev;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
return ret;
out_freeirq:
- if (ab8500->irq_base) {
+ if (ab8500->irq_base)
free_irq(ab8500->irq, ab8500);
out_removeirq:
+ if (ab8500->irq_base)
ab8500_irq_remove(ab8500);
- }
+
return ret;
}
}
if (!cell->ignore_resource_conflicts) {
- ret = acpi_check_resource_conflict(res);
+ ret = acpi_check_resource_conflict(&res[r]);
if (ret)
goto fail_res;
}
s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
i2c_set_clientdata(s5m87xx->rtc, s5m87xx);
- if (pdata->cfg_pmic_irq)
+ if (pdata && pdata->cfg_pmic_irq)
pdata->cfg_pmic_irq();
s5m_irq_init(s5m87xx);
goto err;
init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq_base;
tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);
goto err;
init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq_base;
ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
if (ret < 0)
goto err;
mutex_init(&wm8350->irq_lock);
wm8350->chip_irq = irq;
- wm8350->irq_base = pdata->irq_base;
if (pdata && pdata->irq_base > 0)
irq_base = pdata->irq_base;
break;
}
+ switch (wm8994->type) {
+ case WM1811:
+ ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read jackdet: %d\n", ret);
+ } else if (ret & WM1811_JACKDET_MODE_MASK) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
case WM8994_DC_SERVO_2:
case WM8994_DC_SERVO_READBACK:
case WM8994_DC_SERVO_4:
+ case WM8994_DC_SERVO_4E:
case WM8994_ANALOGUE_HP_1:
case WM8958_MIC_DETECT_1:
case WM8958_MIC_DETECT_2:
" - (C) 2007 Rodolfo Giometti\n");
c2port_class = class_create(THIS_MODULE, "c2port");
- if (!c2port_class) {
+ if (IS_ERR(c2port_class)) {
printk(KERN_ERR "c2port: failed to allocate class\n");
- return -ENOMEM;
+ return PTR_ERR(c2port_class);
}
c2port_class->dev_attrs = c2port_attrs;
*/
mmc_hw_reset_for_init(host);
+ /* Initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
/*
* sdio_reset sends CMD52 to reset card. Since we do not know
* if the card is being re-initialized, just send it. CMD52
/* Hold MCI clock for 8 cycles by default */
host->clk_delay = 8;
/*
- * Default clock gating delay is 200ms.
+ * Default clock gating delay is 0ms to avoid wasting power.
* This value can be tuned by writing into sysfs entry.
*/
- host->clkgate_delay = 200;
+ host->clkgate_delay = 0;
host->clk_gated = false;
INIT_DELAYED_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
spin_lock_init(&host->clk_lock);
if (!mmc_host_is_spi(host))
mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+ /* Initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
/*
* Since we're changing the OCR value, we seem to
* need to tell some cards to go back to the idle
BUG_ON(!host);
WARN_ON(!host->claimed);
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
return err;
BUG_ON(!host);
WARN_ON(!host->claimed);
- /* Make sure we are at 3.3V signalling voltage */
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
- if (err)
- return err;
-
/* Disable preset value enable if already set since last time */
if (host->ops->enable_preset_value) {
mmc_host_clk_hold(host);
* Inform the card of the voltage
*/
if (!powered_resume) {
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
err = mmc_send_io_op_cond(host, host->ocr, &ocr);
if (err)
goto err;
* With these steps taken, mmc_select_voltage() is also required to
* restore the correct voltage setting of the card.
*/
+
+ /* The initialization should be done at 3.3 V I/O voltage. */
+ if (!mmc_card_keep_power(host))
+ mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, 0);
+
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->ocr_avail);
}
}
-static void atmci_configure_dma(struct atmel_mci *host)
+static bool atmci_configure_dma(struct atmel_mci *host)
{
struct mci_platform_data *pdata;
if (host == NULL)
- return;
+ return false;
pdata = host->pdev->dev.platform_data;
host->dma.chan =
dma_request_channel(mask, atmci_filter, pdata->dma_slave);
}
- if (!host->dma.chan)
- dev_notice(&host->pdev->dev, "DMA not available, using PIO\n");
- else
+ if (!host->dma.chan) {
+ dev_warn(&host->pdev->dev, "no DMA channel available\n");
+ return false;
+ } else {
dev_info(&host->pdev->dev,
"Using %s for DMA transfers\n",
dma_chan_name(host->dma.chan));
+ return true;
+ }
}
static inline unsigned int atmci_get_version(struct atmel_mci *host)
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (host->caps.has_dma) {
- dev_info(&pdev->dev, "using DMA\n");
+ if (host->caps.has_dma && atmci_configure_dma(host)) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
host->submit_data = &atmci_submit_data_pdc;
host->stop_transfer = &atmci_stop_transfer_pdc;
} else {
- dev_info(&pdev->dev, "no DMA, no PDC\n");
+ dev_info(&pdev->dev, "using PIO\n");
host->prepare_data = &atmci_prepare_data;
host->submit_data = &atmci_submit_data;
host->stop_transfer = &atmci_stop_transfer;
}
- if (host->caps.has_dma)
- atmci_configure_dma(host);
-
platform_set_drvdata(pdev, host);
/* We need at least one slot to succeed */
/*
* Block size can be up to 2048 bytes, but must be a power of two.
*/
- mmc->max_blk_size = 2048;
+ mmc->max_blk_size = 1 << 11;
/*
- * No limit on the number of blocks transferred.
+ * Limit the number of blocks transferred so that we don't overflow
+ * the maximum request size.
*/
- mmc->max_blk_count = mmc->max_req_size;
+ mmc->max_blk_count = mmc->max_req_size >> 11;
spin_lock_init(&host->lock);
imx_data->scratchpad = val;
return;
case SDHCI_COMMAND:
- if ((host->cmd->opcode == MMC_STOP_TRANSMISSION)
- && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
+ if ((host->cmd->opcode == MMC_STOP_TRANSMISSION ||
+ host->cmd->opcode == MMC_SET_BLOCK_COUNT) &&
+ (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT))
val |= SDHCI_CMD_ABORTCMD;
if (is_imx6q_usdhc(imx_data)) {
dev->netdev_ops = &cfhsi_ops;
dev->type = ARPHRD_CAIF;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
- dev->mtu = CFHSI_MAX_PAYLOAD_SZ;
+ dev->mtu = CFHSI_MAX_CAIF_FRAME_SZ;
dev->tx_queue_len = 0;
dev->destructor = free_netdev;
skb_queue_head_init(&cfhsi->qhead);
"atl1c hardware error (status = 0x%x)\n",
status & ISR_ERROR);
/* reset MAC */
- adapter->work_event |= ATL1C_WORK_EVENT_RESET;
+ set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
schedule_work(&adapter->common_task);
return IRQ_HANDLED;
}
}
}
- netdev_completed_queue(tp->dev, pkts_compl, bytes_compl);
+ netdev_tx_completed_queue(txq, pkts_compl, bytes_compl);
tnapi->tx_cons = sw_idx;
}
skb_tx_timestamp(skb);
- netdev_sent_queue(tp->dev, skb->len);
+ netdev_tx_sent_queue(txq, skb->len);
/* Packets are ready, update Tx producer idx local and on card. */
tw32_tx_mbox(tnapi->prodmbox, entry);
dev_kfree_skb_any(skb);
}
+ netdev_tx_reset_queue(netdev_get_tx_queue(tp->dev, j));
}
- netdev_reset_queue(tp->dev);
}
/* Initialize tx/rx rings for packet processing.
return 0;
}
-static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *,
- struct rtnl_link_stats64 *);
-static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *,
- struct tg3_ethtool_stats *);
+static void tg3_get_nstats(struct tg3 *, struct rtnl_link_stats64 *);
+static void tg3_get_estats(struct tg3 *, struct tg3_ethtool_stats *);
/* tp->lock is held. */
static int tg3_halt(struct tg3 *tp, int kind, int silent)
if (tp->hw_stats) {
/* Save the stats across chip resets... */
- tg3_get_stats64(tp->dev, &tp->net_stats_prev),
+ tg3_get_nstats(tp, &tp->net_stats_prev),
tg3_get_estats(tp, &tp->estats_prev);
/* And make sure the next sample is new data */
return ((u64)val->high << 32) | ((u64)val->low);
}
-static u64 calc_crc_errors(struct tg3 *tp)
+static u64 tg3_calc_crc_errors(struct tg3 *tp)
{
struct tg3_hw_stats *hw_stats = tp->hw_stats;
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) {
u32 val;
- spin_lock_bh(&tp->lock);
if (!tg3_readphy(tp, MII_TG3_TEST1, &val)) {
tg3_writephy(tp, MII_TG3_TEST1,
val | MII_TG3_TEST1_CRC_EN);
tg3_readphy(tp, MII_TG3_RXR_COUNTERS, &val);
} else
val = 0;
- spin_unlock_bh(&tp->lock);
tp->phy_crc_errors += val;
estats->member = old_estats->member + \
get_stat64(&hw_stats->member)
-static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp,
- struct tg3_ethtool_stats *estats)
+static void tg3_get_estats(struct tg3 *tp, struct tg3_ethtool_stats *estats)
{
struct tg3_ethtool_stats *old_estats = &tp->estats_prev;
struct tg3_hw_stats *hw_stats = tp->hw_stats;
if (!hw_stats)
- return old_estats;
+ return;
ESTAT_ADD(rx_octets);
ESTAT_ADD(rx_fragments);
ESTAT_ADD(nic_tx_threshold_hit);
ESTAT_ADD(mbuf_lwm_thresh_hit);
-
- return estats;
}
-static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
- struct rtnl_link_stats64 *stats)
+static void tg3_get_nstats(struct tg3 *tp, struct rtnl_link_stats64 *stats)
{
- struct tg3 *tp = netdev_priv(dev);
struct rtnl_link_stats64 *old_stats = &tp->net_stats_prev;
struct tg3_hw_stats *hw_stats = tp->hw_stats;
- if (!hw_stats)
- return old_stats;
-
stats->rx_packets = old_stats->rx_packets +
get_stat64(&hw_stats->rx_ucast_packets) +
get_stat64(&hw_stats->rx_mcast_packets) +
get_stat64(&hw_stats->tx_carrier_sense_errors);
stats->rx_crc_errors = old_stats->rx_crc_errors +
- calc_crc_errors(tp);
+ tg3_calc_crc_errors(tp);
stats->rx_missed_errors = old_stats->rx_missed_errors +
get_stat64(&hw_stats->rx_discards);
stats->rx_dropped = tp->rx_dropped;
stats->tx_dropped = tp->tx_dropped;
-
- return stats;
}
static inline u32 calc_crc(unsigned char *buf, int len)
}
}
+static struct rtnl_link_stats64 *tg3_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct tg3 *tp = netdev_priv(dev);
+
+ if (!tp->hw_stats)
+ return &tp->net_stats_prev;
+
+ spin_lock_bh(&tp->lock);
+ tg3_get_nstats(tp, stats);
+ spin_unlock_bh(&tp->lock);
+
+ return stats;
+}
+
static const struct net_device_ops tg3_netdev_ops = {
.ndo_open = tg3_open,
.ndo_stop = tg3_close,
CH_DEVICE(0x4408, 4),
CH_DEVICE(0x4409, 4),
CH_DEVICE(0x440a, 4),
+ CH_DEVICE(0x440d, 4),
+ CH_DEVICE(0x440e, 4),
{ 0, }
};
CH_DEVICE(0x4808, 0), /* T420-cx */
CH_DEVICE(0x4809, 0), /* T420-bt */
CH_DEVICE(0x480a, 0), /* T404-bt */
+ CH_DEVICE(0x480d, 0), /* T480-cr */
+ CH_DEVICE(0x480e, 0), /* T440-lp-cr */
{ 0, }
};
u32 rx_coalesce_usecs;
u32 tx_coalesce_usecs;
#ifdef CONFIG_PCI_IOV
- u32 num_vfs;
+ u16 num_vfs;
#endif
struct enic_port_profile *pp;
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
if (pos) {
pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF,
- (u16 *)&enic->num_vfs);
+ &enic->num_vfs);
if (enic->num_vfs) {
err = pci_enable_sriov(pdev, enic->num_vfs);
if (err) {
stats->tx_bytes = tx_bytes;
stats->rx_packets = rx_packets;
- return &port->stats;
+ stats->multicast = port->stats.multicast;
+ stats->rx_errors = port->stats.rx_errors;
+ return stats;
}
static void ehea_update_stats(struct work_struct *work)
context->log_page_size = mtt->page_shift - MLX4_ICM_PAGE_SHIFT;
}
- port = ((context->pri_path.sched_queue >> 6) & 1) + 1;
- if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
- context->pri_path.sched_queue = (context->pri_path.sched_queue &
- 0xc3);
-
*(__be32 *) mailbox->buf = cpu_to_be32(optpar);
memcpy(mailbox->buf + 8, context, sizeof *context);
if (vhcr->op_modifier == 0) {
err = handle_resize(dev, slave, vhcr, inbox, outbox, cmd, cq);
- if (err)
- goto ex_put;
+ goto ex_put;
}
err = mlx4_DMA_wrapper(dev, slave, vhcr, inbox, outbox, cmd);
pr_debug("AutoNeg specified along with Speed or Duplex, AutoNeg parameter ignored\n");
hw->phy.autoneg_advertised = opt.def;
} else {
- hw->phy.autoneg_advertised = AutoNeg;
- pch_gbe_validate_option(
- (int *)(&hw->phy.autoneg_advertised),
- &opt, adapter);
+ int tmp = AutoNeg;
+
+ pch_gbe_validate_option(&tmp, &opt, adapter);
+ hw->phy.autoneg_advertised = tmp;
}
}
.arg = { .l = { .nr = (int)ARRAY_SIZE(fc_list),
.p = fc_list } }
};
- hw->mac.fc = FlowControl;
- pch_gbe_validate_option((int *)(&hw->mac.fc),
- &opt, adapter);
+ int tmp = FlowControl;
+
+ pch_gbe_validate_option(&tmp, &opt, adapter);
+ hw->mac.fc = tmp;
}
pch_gbe_check_copper_options(adapter);
config NET_PACKET_ENGINE
bool "Packet Engine devices"
+ default y
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
(void __iomem *)port_regs;
u32 delay = 10;
int status = 0;
- unsigned long hw_flags = 0;
if (ql_mii_setup(qdev))
return -1;
value = ql_read_page0_reg(qdev, &port_regs->portStatus);
if (value & PORT_STATUS_IC)
break;
- spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+ spin_unlock_irq(&qdev->hw_lock);
msleep(500);
- spin_lock_irqsave(&qdev->hw_lock, hw_flags);
+ spin_lock_irq(&qdev->hw_lock);
} while (--delay);
if (delay == 0) {
static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
rtl_generic_op(tp, tp->jumbo_ops.enable);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
}
static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
{
+ void __iomem *ioaddr = tp->mmio_addr;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
rtl_generic_op(tp, tp->jumbo_ops.disable);
+ RTL_W8(Cfg9346, Cfg9346_Lock);
}
static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
+ struct device *d = &pdev->dev;
+
+ pm_runtime_get_sync(d);
rtl8169_net_suspend(dev);
pci_wake_from_d3(pdev, true);
pci_set_power_state(pdev, PCI_D3hot);
}
+
+ pm_runtime_put_noidle(d);
}
static struct pci_driver rtl8169_pci_driver = {
static void netvsc_get_drvinfo(struct net_device *net,
struct ethtool_drvinfo *info)
{
- strcpy(info->driver, "hv_netvsc");
+ strcpy(info->driver, KBUILD_MODNAME);
strcpy(info->version, HV_DRV_VERSION);
strcpy(info->fw_version, "N/A");
}
/* The one and only one */
static struct hv_driver netvsc_drv = {
- .name = "netvsc",
+ .name = KBUILD_MODNAME,
.id_table = id_table,
.probe = netvsc_probe,
.remove = netvsc_remove,
entry = (struct skb_data *) skb->cb;
urb = entry->urb;
+ spin_unlock_irqrestore(&q->lock, flags);
// during some PM-driven resume scenarios,
// these (async) unlinks complete immediately
retval = usb_unlink_urb (urb);
netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
else
count++;
+ spin_lock_irqsave(&q->lock, flags);
}
spin_unlock_irqrestore (&q->lock, flags);
return count;
ctx->l4_hdr_size = ((struct tcphdr *)
skb_transport_header(skb))->doff * 4;
else if (iph->protocol == IPPROTO_UDP)
- /*
- * Use tcp header size so that bytes to
- * be copied are more than required by
- * the device.
- */
ctx->l4_hdr_size =
- sizeof(struct tcphdr);
+ sizeof(struct udphdr);
else
ctx->l4_hdr_size = 0;
} else {
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.29.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01011200
+#define VMXNET3_DRIVER_VERSION_NUM 0x01011D00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
- ATH_ALLOC_BANK(ah->addac5416_21,
- ah->iniAddac.ia_rows * ah->iniAddac.ia_columns);
ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
return 0;
ATH_FREE_BANK(ah->analogBank6Data);
ATH_FREE_BANK(ah->analogBank6TPCData);
ATH_FREE_BANK(ah->analogBank7Data);
- ATH_FREE_BANK(ah->addac5416_21);
ATH_FREE_BANK(ah->bank6Temp);
#undef ATH_FREE_BANK
if (ah->eep_ops->set_addac)
ah->eep_ops->set_addac(ah, chan);
- if (AR_SREV_5416_22_OR_LATER(ah)) {
- REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
- } else {
- struct ar5416IniArray temp;
- u32 addacSize =
- sizeof(u32) * ah->iniAddac.ia_rows *
- ah->iniAddac.ia_columns;
-
- /* For AR5416 2.0/2.1 */
- memcpy(ah->addac5416_21,
- ah->iniAddac.ia_array, addacSize);
-
- /* override CLKDRV value at [row, column] = [31, 1] */
- (ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0;
-
- temp.ia_array = ah->addac5416_21;
- temp.ia_columns = ah->iniAddac.ia_columns;
- temp.ia_rows = ah->iniAddac.ia_rows;
- REG_WRITE_ARRAY(&temp, 1, regWrites);
- }
-
+ REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
ENABLE_REGWRITE_BUFFER(ah);
INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac,
ARRAY_SIZE(ar5416Addac), 2);
}
+
+ /* iniAddac needs to be modified for these chips */
+ if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
+ struct ar5416IniArray *addac = &ah->iniAddac;
+ u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
+ u32 *data;
+
+ data = kmalloc(size, GFP_KERNEL);
+ if (!data)
+ return;
+
+ memcpy(data, addac->ia_array, size);
+ addac->ia_array = data;
+
+ if (!AR_SREV_5416_22_OR_LATER(ah)) {
+ /* override CLKDRV value */
+ INI_RA(addac, 31,1) = 0;
+ }
+ }
}
/* Support for Japan ch.14 (2484) spread */
u32 *analogBank6Data;
u32 *analogBank6TPCData;
u32 *analogBank7Data;
- u32 *addac5416_21;
u32 *bank6Temp;
u8 txpower_limit;
{
struct ieee80211_sta *sta;
struct carl9170_sta_info *sta_info;
+ struct ieee80211_tx_info *tx_info;
rcu_read_lock();
sta = __carl9170_get_tx_sta(ar, skb);
goto out_rcu;
sta_info = (void *) sta->drv_priv;
- if (unlikely(sta_info->sleeping)) {
- struct ieee80211_tx_info *tx_info;
+ tx_info = IEEE80211_SKB_CB(skb);
+ if (unlikely(sta_info->sleeping) &&
+ !(tx_info->flags & (IEEE80211_TX_CTL_POLL_RESPONSE |
+ IEEE80211_TX_CTL_CLEAR_PS_FILT))) {
rcu_read_unlock();
- tx_info = IEEE80211_SKB_CB(skb);
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
atomic_dec(&ar->tx_ampdu_upload);
tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ carl9170_release_dev_space(ar, skb);
carl9170_tx_status(ar, skb, false);
return true;
}
}
/* either retransmit or send bar if ack not recd */
if (!ack_recd) {
- struct ieee80211_tx_rate *txrate =
- tx_info->status.rates;
- if (retry && (txrate[0].count < (int)retry_limit)) {
+ if (retry && (ini->txretry[index] < (int)retry_limit)) {
ini->txretry[index]++;
ini->tx_in_transit--;
/*
* Use high prededence for retransmit to
* give some punch
*/
- /* brcms_c_txq_enq(wlc, scb, p,
- * BRCMS_PRIO_TO_PREC(tid)); */
brcms_c_txq_enq(wlc, scb, p,
BRCMS_PRIO_TO_HI_PREC(tid));
} else {
IEEE80211_TX_STAT_AMPDU_NO_BACK;
skb_pull(p, D11_PHY_HDR_LEN);
skb_pull(p, D11_TXH_LEN);
- wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_"
- "transit %d\n", "AMPDU status", seq,
- ini->tx_in_transit);
+ BCMMSG(wiphy,
+ "BA Timeout, seq %d, in_transit %d\n",
+ seq, ini->tx_in_transit);
ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw,
p);
}
.flags = CMD_SYNC,
.data[0] = key_data.rsc_tsc,
.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
- .len[0] = sizeof(key_data.rsc_tsc),
+ .len[0] = sizeof(*key_data.rsc_tsc),
};
ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd);
unsigned long flags;
struct iwl_addsta_cmd sta_cmd;
u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta);
+ __le16 key_flags;
/* if station isn't there, neither is the key */
if (sta_id == IWL_INVALID_STATION)
IWL_ERR(priv, "offset %d not used in uCode key table.\n",
keyconf->hw_key_idx);
- sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
+ key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC |
+ STA_KEY_FLG_INVALID;
+
+ if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ key_flags |= STA_KEY_MULTICAST_MSK;
+
+ sta_cmd.key.key_flags = key_flags;
sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
priv->wep_key_curr_index = 0;
+ priv->sec_info.encryption_mode = 0;
ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
if (mode == NL80211_IFTYPE_ADHOC) {
cancel_work_sync(&rt2x00dev->rxdone_work);
cancel_work_sync(&rt2x00dev->txdone_work);
}
- destroy_workqueue(rt2x00dev->workqueue);
+ if (rt2x00dev->workqueue)
+ destroy_workqueue(rt2x00dev->workqueue);
/*
* Free the tx status fifo.
#include <asm/machdep.h>
#endif /* CONFIG_PPC */
-#include <asm/setup.h>
#include <asm/page.h>
char *of_fdt_get_string(struct boot_param_header *blob, u32 offset)
if (!phy_id || sz < sizeof(*phy_id))
return NULL;
- sprintf(bus_id, PHY_ID_FMT, "0", be32_to_cpu(phy_id[0]));
+ sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0]));
phy = phy_connect(dev, bus_id, hndlr, 0, iface);
return IS_ERR(phy) ? NULL : phy;
int err;
pps_class = class_create(THIS_MODULE, "pps");
- if (!pps_class) {
+ if (IS_ERR(pps_class)) {
pr_err("failed to allocate class\n");
- return -ENOMEM;
+ return PTR_ERR(pps_class);
}
pps_class->dev_attrs = pps_attrs;
*/
mport = priv->mport;
- wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE));
- rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
while (wr_ptr != rd_ptr) {
idb_entry = (u64 *)(priv->idb_base +
(TSI721_IDB_ENTRY_SIZE * rd_ptr));
rd_ptr++;
+ rd_ptr %= IDB_QSIZE;
idb.msg = *idb_entry;
*idb_entry = 0;
* the LDO activate bit to implment the changes on the
* LDO output.
*/
- return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0,
- info->activate_bit);
+ return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
+ info->activate_bit, info->activate_bit);
}
static int da9052_set_dcdc_voltage(struct regulator_dev *rdev,
* the DCDC activate bit to implment the changes on the
* DCDC output.
*/
- return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, 0,
- info->activate_bit);
+ return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
+ info->activate_bit, info->activate_bit);
}
static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel);
break;
case TPS65911_REG_VDDCTRL:
- vsel = selector;
+ vsel = selector + 3;
tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel);
}
unsigned char tmp;
int res;
+ tmp = R100CNT;
+ res = read_regs(&spi->dev, &tmp, 1);
+ if (res || tmp != 0x20) {
+ dev_err(&spi->dev, "cannot read RTC register\n");
+ return -ENODEV;
+ }
+
rtc = rtc_device_register("r9701",
&spi->dev, &r9701_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc))
dev_set_drvdata(&spi->dev, rtc);
- tmp = R100CNT;
- res = read_regs(&spi->dev, &tmp, 1);
- if (res || tmp != 0x20) {
- rtc_device_unregister(rtc);
- return res;
- }
-
return 0;
}
DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
- 0, -1, -1, q->irq_ptr->int_parm);
+ q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
return 0;
}
DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
- 0, -1, -1, q->irq_ptr->int_parm);
+ q->nr, q->first_to_kick, count, q->irq_ptr->int_parm);
return 0;
}
kunmap_atomic(sdt, KM_USER0);
}
- bio->bi_flags |= BIO_MAPPED_INTEGRITY;
+ bio->bi_flags |= (1 << BIO_MAPPED_INTEGRITY);
}
return 0;
return -ENOMEM;
}
-static int __init pl022_dma_probe(struct pl022 *pl022)
+static int __devinit pl022_dma_probe(struct pl022 *pl022)
{
dma_cap_mask_t mask;
config PPC_EARLY_DEBUG_EHV_BC
bool "Early console (udbg) support for ePAPR hypervisors"
- depends on PPC_EPAPR_HV_BYTECHAN
+ depends on PPC_EPAPR_HV_BYTECHAN=y
help
Select this option to enable early console (a.k.a. "udbg") support
via an ePAPR byte channel. You also need to choose the byte channel
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
}
-static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
+static void ehci_fsl_usb_setup(struct ehci_hcd *ehci)
{
struct usb_hcd *hcd = ehci_to_hcd(ehci);
struct fsl_usb2_platform_data *pdata;
#endif
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
}
-
- if (!(in_be32(non_ehci + FSL_SOC_USB_CTRL) & CTRL_PHY_CLK_VALID)) {
- printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
- return -ENODEV;
- }
- return 0;
}
/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
- if (ehci_fsl_usb_setup(ehci))
- return -ENODEV;
+ ehci_fsl_usb_setup(ehci);
ehci_port_power(ehci, 0);
return 0;
#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
-#define CTRL_PHY_CLK_VALID (1 << 17)
#define SNOOP_SIZE_2GB 0x1e
#endif /* _EHCI_FSL_H */
call_rcu(&ctx->rcu_head, ctx_rcu_free);
}
-static inline void get_ioctx(struct kioctx *kioctx)
-{
- BUG_ON(atomic_read(&kioctx->users) <= 0);
- atomic_inc(&kioctx->users);
-}
-
static inline int try_get_ioctx(struct kioctx *kioctx)
{
return atomic_inc_not_zero(&kioctx->users);
mm = ctx->mm = current->mm;
atomic_inc(&mm->mm_count);
- atomic_set(&ctx->users, 1);
+ atomic_set(&ctx->users, 2);
spin_lock_init(&ctx->ctx_lock);
spin_lock_init(&ctx->ring_info.ring_lock);
init_waitqueue_head(&ctx->wait);
kmem_cache_free(kiocb_cachep, req);
ctx->reqs_active--;
}
+ if (unlikely(!ctx->reqs_active && ctx->dead))
+ wake_up_all(&ctx->wait);
spin_unlock_irq(&ctx->ctx_lock);
}
fput(req->ki_filp);
/* Link the iocb into the context's free list */
+ rcu_read_lock();
spin_lock_irq(&ctx->ctx_lock);
really_put_req(ctx, req);
+ /*
+ * at that point ctx might've been killed, but actual
+ * freeing is RCU'd
+ */
spin_unlock_irq(&ctx->ctx_lock);
+ rcu_read_unlock();
- put_ioctx(ctx);
spin_lock_irq(&fput_lock);
}
spin_unlock_irq(&fput_lock);
* this function will be executed w/out any aio kthread wakeup.
*/
if (unlikely(!fput_atomic(req->ki_filp))) {
- get_ioctx(ctx);
spin_lock(&fput_lock);
list_add(&req->ki_list, &fput_head);
spin_unlock(&fput_lock);
ret = PTR_ERR(ioctx);
if (!IS_ERR(ioctx)) {
ret = put_user(ioctx->user_id, ctxp);
- if (!ret)
+ if (!ret) {
+ put_ioctx(ioctx);
return 0;
-
- get_ioctx(ioctx); /* io_destroy() expects us to hold a ref */
+ }
io_destroy(ioctx);
}
current->mm->free_area_cache = current->mm->mmap_base;
current->mm->cached_hole_size = 0;
+ retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
+ if (retval < 0) {
+ /* Someone check-me: is this error path enough? */
+ send_sig(SIGKILL, current, 0);
+ return retval;
+ }
+
install_exec_creds(bprm);
current->flags &= ~PF_FORKNOEXEC;
return retval;
}
- retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
- if (retval < 0) {
- /* Someone check-me: is this error path enough? */
- send_sig(SIGKILL, current, 0);
- return retval;
- }
-
current->mm->start_stack =
(unsigned long) create_aout_tables((char __user *) bprm->p, bprm);
#ifdef __alpha__
struct btrfs_path *path;
struct btrfs_key info_key = { 0 };
struct btrfs_delayed_ref_root *delayed_refs = NULL;
- struct btrfs_delayed_ref_head *head = NULL;
+ struct btrfs_delayed_ref_head *head;
int info_level = 0;
int ret;
struct list_head prefs_delayed;
* at a specified point in time
*/
again:
+ head = NULL;
+
ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto out;
goto again;
}
ret = __add_delayed_refs(head, seq, &info_key, &prefs_delayed);
- if (ret)
+ if (ret) {
+ spin_unlock(&delayed_refs->lock);
goto out;
+ }
}
spin_unlock(&delayed_refs->lock);
spin_lock(&fs_info->reada_lock);
ret = radix_tree_insert(&dev->reada_zones,
- (unsigned long)zone->end >> PAGE_CACHE_SHIFT,
+ (unsigned long)(zone->end >> PAGE_CACHE_SHIFT),
zone);
spin_unlock(&fs_info->reada_lock);
* If either that or op not supported returned, follow
* the normal lookup.
*/
- if ((rc == 0) || (rc == -ENOENT))
+ switch (rc) {
+ case 0:
+ /*
+ * The server may allow us to open things like
+ * FIFOs, but the client isn't set up to deal
+ * with that. If it's not a regular file, just
+ * close it and proceed as if it were a normal
+ * lookup.
+ */
+ if (newInode && !S_ISREG(newInode->i_mode)) {
+ CIFSSMBClose(xid, pTcon, fileHandle);
+ break;
+ }
+ case -ENOENT:
posix_open = true;
- else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP))
+ case -EOPNOTSUPP:
+ break;
+ default:
pTcon->broken_posix_open = true;
+ }
}
if (!posix_open)
rc = cifs_get_inode_info_unix(&newInode, full_path,
if (fattr->cf_cifsattrs & ATTR_DIRECTORY) {
fattr->cf_mode = S_IFDIR | cifs_sb->mnt_dir_mode;
fattr->cf_dtype = DT_DIR;
+ /*
+ * Server can return wrong NumberOfLinks value for directories
+ * when Unix extensions are disabled - fake it.
+ */
+ fattr->cf_nlink = 2;
} else {
fattr->cf_mode = S_IFREG | cifs_sb->mnt_file_mode;
fattr->cf_dtype = DT_REG;
/* clear write bits if ATTR_READONLY is set */
if (fattr->cf_cifsattrs & ATTR_READONLY)
fattr->cf_mode &= ~(S_IWUGO);
- }
- fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+ fattr->cf_nlink = le32_to_cpu(info->NumberOfLinks);
+ }
fattr->cf_uid = cifs_sb->mnt_uid;
fattr->cf_gid = cifs_sb->mnt_gid;
}
/*BB check (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID ) to see if need
to set uid/gid */
- inc_nlink(inode);
cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
cifs_fill_uniqueid(inode->i_sb, &fattr);
d_drop(direntry);
} else {
mkdir_get_info:
- inc_nlink(inode);
if (pTcon->unix_ext)
rc = cifs_get_inode_info_unix(&newinode, full_path,
inode->i_sb, xid);
}
}
mkdir_out:
+ /*
+ * Force revalidate to get parent dir info when needed since cached
+ * attributes are invalid now.
+ */
+ CIFS_I(inode)->time = 0;
kfree(full_path);
FreeXid(xid);
cifs_put_tlink(tlink);
cifs_put_tlink(tlink);
if (!rc) {
- drop_nlink(inode);
spin_lock(&direntry->d_inode->i_lock);
i_size_write(direntry->d_inode, 0);
clear_nlink(direntry->d_inode);
}
cifsInode = CIFS_I(direntry->d_inode);
- cifsInode->time = 0; /* force revalidate to go get info when
- needed */
+ /* force revalidate to go get info when needed */
+ cifsInode->time = 0;
cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* force revalidate to get parent dir info
- since cached search results now invalid */
+ /*
+ * Force revalidate to get parent dir info when needed since cached
+ * attributes are invalid now.
+ */
+ cifsInode->time = 0;
direntry->d_inode->i_ctime = inode->i_ctime = inode->i_mtime =
current_fs_time(inode->i_sb);
}
#endif
+/*
+ * Compare 2 name strings, return 0 if they match, otherwise non-zero.
+ * The strings are both count bytes long, and count is non-zero.
+ */
+static inline int dentry_cmp(const unsigned char *cs, size_t scount,
+ const unsigned char *ct, size_t tcount)
+{
+ if (scount != tcount)
+ return 1;
+
+ do {
+ if (*cs != *ct)
+ return 1;
+ cs++;
+ ct++;
+ tcount--;
+ } while (tcount);
+ return 0;
+}
+
static void __d_free(struct rcu_head *head)
{
struct dentry *dentry = container_of(head, struct dentry, d_u.d_rcu);
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
- struct completion *vfork_done;
int core_waiters = -EBUSY;
init_completion(&core_state->startup);
core_waiters = zap_threads(tsk, mm, core_state, exit_code);
up_write(&mm->mmap_sem);
- if (unlikely(core_waiters < 0))
- goto fail;
-
- /*
- * Make sure nobody is waiting for us to release the VM,
- * otherwise we can deadlock when we wait on each other
- */
- vfork_done = tsk->vfork_done;
- if (vfork_done) {
- tsk->vfork_done = NULL;
- complete(vfork_done);
- }
-
- if (core_waiters)
+ if (core_waiters > 0)
wait_for_completion(&core_state->startup);
-fail:
+
return core_waiters;
}
#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
+#include <linux/types.h>
+
/* -------------------------------------------------------------------------------
* From AMBA UART (PL010) Block Specification
* -------------------------------------------------------------------------------
};
extern struct dentry_stat_t dentry_stat;
-/*
- * Compare 2 name strings, return 0 if they match, otherwise non-zero.
- * The strings are both count bytes long, and count is non-zero.
- */
-static inline int dentry_cmp(const unsigned char *cs, size_t scount,
- const unsigned char *ct, size_t tcount)
-{
- if (scount != tcount)
- return 1;
-
- do {
- if (*cs != *ct)
- return 1;
- cs++;
- ct++;
- tcount--;
- } while (tcount);
- return 0;
-}
-
/* Name hashing routines. Initial hash value */
/* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
#define init_name_hash() 0
#include <linux/errno.h>
#include <linux/list.h>
+/*
+ * Keep this list arranged in rough order of priority. Anything listed after
+ * KMSG_DUMP_OOPS will not be logged by default unless printk.always_kmsg_dump
+ * is passed to the kernel.
+ */
enum kmsg_dump_reason {
- KMSG_DUMP_OOPS,
KMSG_DUMP_PANIC,
+ KMSG_DUMP_OOPS,
+ KMSG_DUMP_EMERG,
KMSG_DUMP_RESTART,
KMSG_DUMP_HALT,
KMSG_DUMP_POWEROFF,
- KMSG_DUMP_EMERG,
};
/**
extern void mem_cgroup_replace_page_cache(struct page *oldpage,
struct page *newpage);
-extern void mem_cgroup_reset_owner(struct page *page);
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
extern int do_swap_account;
#endif
struct page *newpage)
{
}
-
-static inline void mem_cgroup_reset_owner(struct page *page)
-{
-}
#endif /* CONFIG_CGROUP_MEM_CONT */
#if !defined(CONFIG_CGROUP_MEM_RES_CTLR) || !defined(CONFIG_DEBUG_VM)
return NULL;
}
+static inline struct device_node *of_find_compatible_node(
+ struct device_node *from,
+ const char *type,
+ const char *compat)
+{
+ return NULL;
+}
+
static inline int of_property_read_u32_array(const struct device_node *np,
const char *propname,
u32 *out_values, size_t sz)
#define _this_cpu_generic_to_op(pcp, val, op) \
do { \
unsigned long flags; \
- local_irq_save(flags); \
+ raw_local_irq_save(flags); \
*__this_cpu_ptr(&(pcp)) op val; \
- local_irq_restore(flags); \
+ raw_local_irq_restore(flags); \
} while (0)
#ifndef this_cpu_write
({ \
typeof(pcp) ret__; \
unsigned long flags; \
- local_irq_save(flags); \
+ raw_local_irq_save(flags); \
__this_cpu_add(pcp, val); \
ret__ = __this_cpu_read(pcp); \
- local_irq_restore(flags); \
+ raw_local_irq_restore(flags); \
ret__; \
})
#define _this_cpu_generic_xchg(pcp, nval) \
({ typeof(pcp) ret__; \
unsigned long flags; \
- local_irq_save(flags); \
+ raw_local_irq_save(flags); \
ret__ = __this_cpu_read(pcp); \
__this_cpu_write(pcp, nval); \
- local_irq_restore(flags); \
+ raw_local_irq_restore(flags); \
ret__; \
})
({ \
typeof(pcp) ret__; \
unsigned long flags; \
- local_irq_save(flags); \
+ raw_local_irq_save(flags); \
ret__ = __this_cpu_read(pcp); \
if (ret__ == (oval)) \
__this_cpu_write(pcp, nval); \
- local_irq_restore(flags); \
+ raw_local_irq_restore(flags); \
ret__; \
})
({ \
int ret__; \
unsigned long flags; \
- local_irq_save(flags); \
+ raw_local_irq_save(flags); \
ret__ = __this_cpu_generic_cmpxchg_double(pcp1, pcp2, \
oval1, oval2, nval1, nval2); \
- local_irq_restore(flags); \
+ raw_local_irq_restore(flags); \
ret__; \
})
# ifndef __this_cpu_add_return_8
# define __this_cpu_add_return_8(pcp, val) __this_cpu_generic_add_return(pcp, val)
# endif
-# define __this_cpu_add_return(pcp, val) __pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
+# define __this_cpu_add_return(pcp, val) \
+ __pcpu_size_call_return2(__this_cpu_add_return_, pcp, val)
#endif
-#define __this_cpu_sub_return(pcp, val) this_cpu_add_return(pcp, -(val))
-#define __this_cpu_inc_return(pcp) this_cpu_add_return(pcp, 1)
-#define __this_cpu_dec_return(pcp) this_cpu_add_return(pcp, -1)
+#define __this_cpu_sub_return(pcp, val) __this_cpu_add_return(pcp, -(val))
+#define __this_cpu_inc_return(pcp) __this_cpu_add_return(pcp, 1)
+#define __this_cpu_dec_return(pcp) __this_cpu_add_return(pcp, -1)
#define __this_cpu_generic_xchg(pcp, nval) \
({ typeof(pcp) ret__; \
/*
* Per process flags
*/
-#define PF_STARTING 0x00000002 /* being created */
#define PF_EXITING 0x00000004 /* getting shut down */
#define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */
#define PF_VCPU 0x00000010 /* I'm a virtual CPU */
* Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
* subscriptions and synchronises with wait4(). Also used in procfs. Also
* pins the final release of task.io_context. Also protects ->cpuset and
- * ->cgroup.subsys[].
+ * ->cgroup.subsys[]. And ->vfork_done.
*
* Nests both inside and outside of read_lock(&tasklist_lock).
* It must not be nested with write_lock_irq(&tasklist_lock),
struct tcp_sack_block recv_sack_cache[4];
- struct sk_buff *highest_sack; /* highest skb with SACK received
+ struct sk_buff *highest_sack; /* skb just after the highest
+ * skb with SACKed bit set
* (validity guaranteed only if
* sacked_out > 0)
*/
u32 metrics[RTAX_MAX];
u32 rate_tokens; /* rate limiting for ICMP */
- int redirect_genid;
unsigned long rate_last;
unsigned long pmtu_expires;
u32 pmtu_orig;
u32 pmtu_learned;
struct inetpeer_addr_base redirect_learned;
+ struct list_head gc_list;
/*
* Once inet_peer is queued for deletion (refcnt == -1), following fields
* are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
extern void inet_putpeer(struct inet_peer *p);
extern bool inet_peer_xrlim_allow(struct inet_peer *peer, int timeout);
+extern void inetpeer_invalidate_tree(int family);
+
/*
* temporary check to make sure we dont access rid, ip_id_count, tcp_ts,
* tcp_ts_stamp if no refcount is taken on inet_peer
}
}
-/* Start sequence of the highest skb with SACKed bit, valid only if
- * sacked > 0 or when the caller has ensured validity by itself.
+/* Start sequence of the skb just after the highest skb with SACKed
+ * bit, valid only if sacked_out > 0 or when the caller has ensured
+ * validity by itself.
*/
static inline u32 tcp_highest_sack_seq(struct tcp_sock *tp)
{
return mm;
}
+static void complete_vfork_done(struct task_struct *tsk)
+{
+ struct completion *vfork;
+
+ task_lock(tsk);
+ vfork = tsk->vfork_done;
+ if (likely(vfork)) {
+ tsk->vfork_done = NULL;
+ complete(vfork);
+ }
+ task_unlock(tsk);
+}
+
+static int wait_for_vfork_done(struct task_struct *child,
+ struct completion *vfork)
+{
+ int killed;
+
+ freezer_do_not_count();
+ killed = wait_for_completion_killable(vfork);
+ freezer_count();
+
+ if (killed) {
+ task_lock(child);
+ child->vfork_done = NULL;
+ task_unlock(child);
+ }
+
+ put_task_struct(child);
+ return killed;
+}
+
/* Please note the differences between mmput and mm_release.
* mmput is called whenever we stop holding onto a mm_struct,
* error success whatever.
*/
void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
- struct completion *vfork_done = tsk->vfork_done;
-
/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
if (unlikely(tsk->robust_list)) {
/* Get rid of any cached register state */
deactivate_mm(tsk, mm);
- /* notify parent sleeping on vfork() */
- if (vfork_done) {
- tsk->vfork_done = NULL;
- complete(vfork_done);
- }
+ if (tsk->vfork_done)
+ complete_vfork_done(tsk);
/*
* If we're exiting normally, clear a user-space tid field if
* requested. We leave this alone when dying by signal, to leave
* the value intact in a core dump, and to save the unnecessary
- * trouble otherwise. Userland only wants this done for a sys_exit.
+ * trouble, say, a killed vfork parent shouldn't touch this mm.
+ * Userland only wants this done for a sys_exit.
*/
if (tsk->clear_child_tid) {
if (!(tsk->flags & PF_SIGNALED) &&
new_flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER);
new_flags |= PF_FORKNOEXEC;
- new_flags |= PF_STARTING;
p->flags = new_flags;
}
if (clone_flags & CLONE_VFORK) {
p->vfork_done = &vfork;
init_completion(&vfork);
+ get_task_struct(p);
}
- /*
- * We set PF_STARTING at creation in case tracing wants to
- * use this to distinguish a fully live task from one that
- * hasn't finished SIGSTOP raising yet. Now we clear it
- * and set the child going.
- */
- p->flags &= ~PF_STARTING;
-
wake_up_new_task(p);
/* forking complete and child started to run, tell ptracer */
ptrace_event(trace, nr);
if (clone_flags & CLONE_VFORK) {
- freezer_do_not_count();
- wait_for_completion(&vfork);
- freezer_count();
- ptrace_event(PTRACE_EVENT_VFORK_DONE, nr);
+ if (!wait_for_vfork_done(p, &vfork))
+ ptrace_event(PTRACE_EVENT_VFORK_DONE, nr);
}
} else {
nr = PTR_ERR(p);
* For preemptible RCU it is sufficient to call rcu_read_unlock in order
* to exit the grace period. For classic RCU, a reschedule is required.
*/
-static void rcu_lock_break(struct task_struct *g, struct task_struct *t)
+static bool rcu_lock_break(struct task_struct *g, struct task_struct *t)
{
+ bool can_cont;
+
get_task_struct(g);
get_task_struct(t);
rcu_read_unlock();
cond_resched();
rcu_read_lock();
+ can_cont = pid_alive(g) && pid_alive(t);
put_task_struct(t);
put_task_struct(g);
+
+ return can_cont;
}
/*
goto unlock;
if (!--batch_count) {
batch_count = HUNG_TASK_BATCHING;
- rcu_lock_break(g, t);
- /* Exit if t or g was unhashed during refresh. */
- if (t->state == TASK_DEAD || g->state == TASK_DEAD)
+ if (!rcu_lock_break(g, t))
goto unlock;
}
/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
/* add new interrupt at end of irq queue */
do {
+ /*
+ * Or all existing action->thread_mask bits,
+ * so we can find the next zero bit for this
+ * new action.
+ */
thread_mask |= old->thread_mask;
old_ptr = &old->next;
old = *old_ptr;
}
/*
- * Setup the thread mask for this irqaction. Unlikely to have
- * 32 resp 64 irqs sharing one line, but who knows.
+ * Setup the thread mask for this irqaction for ONESHOT. For
+ * !ONESHOT irqs the thread mask is 0 so we can avoid a
+ * conditional in irq_wake_thread().
*/
- if (new->flags & IRQF_ONESHOT && thread_mask == ~0UL) {
- ret = -EBUSY;
- goto out_mask;
+ if (new->flags & IRQF_ONESHOT) {
+ /*
+ * Unlikely to have 32 resp 64 irqs sharing one line,
+ * but who knows.
+ */
+ if (thread_mask == ~0UL) {
+ ret = -EBUSY;
+ goto out_mask;
+ }
+ /*
+ * The thread_mask for the action is or'ed to
+ * desc->thread_active to indicate that the
+ * IRQF_ONESHOT thread handler has been woken, but not
+ * yet finished. The bit is cleared when a thread
+ * completes. When all threads of a shared interrupt
+ * line have completed desc->threads_active becomes
+ * zero and the interrupt line is unmasked. See
+ * handle.c:irq_wake_thread() for further information.
+ *
+ * If no thread is woken by primary (hard irq context)
+ * interrupt handlers, then desc->threads_active is
+ * also checked for zero to unmask the irq line in the
+ * affected hard irq flow handlers
+ * (handle_[fasteoi|level]_irq).
+ *
+ * The new action gets the first zero bit of
+ * thread_mask assigned. See the loop above which or's
+ * all existing action->thread_mask bits.
+ */
+ new->thread_mask = 1 << ffz(thread_mask);
}
- new->thread_mask = 1 << ffz(thread_mask);
if (!shared) {
init_waitqueue_head(&desc->wait_for_threads);
if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr) ||
ftrace_text_reserved(p->addr, p->addr) ||
- jump_label_text_reserved(p->addr, p->addr))
- goto fail_with_jump_label;
+ jump_label_text_reserved(p->addr, p->addr)) {
+ ret = -EINVAL;
+ goto cannot_probe;
+ }
/* User can pass only KPROBE_FLAG_DISABLED to register_kprobe */
p->flags &= KPROBE_FLAG_DISABLED;
* its code to prohibit unexpected unloading.
*/
if (unlikely(!try_module_get(probed_mod)))
- goto fail_with_jump_label;
+ goto cannot_probe;
/*
* If the module freed .init.text, we couldn't insert
if (within_module_init((unsigned long)p->addr, probed_mod) &&
probed_mod->state != MODULE_STATE_COMING) {
module_put(probed_mod);
- goto fail_with_jump_label;
+ goto cannot_probe;
}
/* ret will be updated by following code */
}
return ret;
-fail_with_jump_label:
+cannot_probe:
preempt_enable();
jump_label_unlock();
return ret;
#endif
module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR);
+static bool always_kmsg_dump;
+module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR);
+
/* Check if we have any console registered that can be called early in boot. */
static int have_callable_console(void)
{
unsigned long l1, l2;
unsigned long flags;
+ if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
+ return;
+
/* Theoretically, the log could move on after we do this, but
there's not a lot we can do about that. The new messages
will overwrite the start of what we dump. */
static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action) {
+ switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
cpuset_update_active_cpus();
static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action) {
+ switch (action & ~CPU_TASKS_FROZEN) {
case CPU_DOWN_PREPARE:
cpuset_update_active_cpus();
return NOTIFY_OK;
if (obj->static_init == 1) {
debug_object_init(obj, &descr_type_test);
debug_object_activate(obj, &descr_type_test);
- /*
- * Real code should return 0 here ! This is
- * not a fixup of some bad behaviour. We
- * merily call the debug_init function to keep
- * track of the object.
- */
- return 1;
- } else {
- /* Real code needs to emit a warning here */
+ return 0;
}
- return 0;
+ return 1;
case ODEBUG_STATE_ACTIVE:
debug_object_deactivate(obj, &descr_type_test);
obj.static_init = 1;
debug_object_activate(&obj, &descr_type_test);
- if (check_results(&obj, ODEBUG_STATE_ACTIVE, ++fixups, warnings))
+ if (check_results(&obj, ODEBUG_STATE_ACTIVE, fixups, warnings))
goto out;
debug_object_init(&obj, &descr_type_test);
if (check_results(&obj, ODEBUG_STATE_INIT, ++fixups, ++warnings))
case 'U':
return uuid_string(buf, end, ptr, spec, fmt);
case 'V':
- return buf + vsnprintf(buf, end > buf ? end - buf : 0,
- ((struct va_format *)ptr)->fmt,
- *(((struct va_format *)ptr)->va));
+ {
+ va_list va;
+
+ va_copy(va, *((struct va_format *)ptr)->va);
+ buf += vsnprintf(buf, end > buf ? end - buf : 0,
+ ((struct va_format *)ptr)->fmt, va);
+ va_end(va);
+ return buf;
+ }
case 'K':
/*
* %pK cannot be used in IRQ context because its test
set_pmd_at(mm, haddr, pmd, entry);
prepare_pmd_huge_pte(pgtable, mm);
add_mm_counter(mm, MM_ANONPAGES, HPAGE_PMD_NR);
+ mm->nr_ptes++;
spin_unlock(&mm->page_table_lock);
}
pmd = pmd_mkold(pmd_wrprotect(pmd));
set_pmd_at(dst_mm, addr, dst_pmd, pmd);
prepare_pmd_huge_pte(pgtable, dst_mm);
+ dst_mm->nr_ptes++;
ret = 0;
out_unlock:
}
kfree(pages);
- mm->nr_ptes++;
smp_wmb(); /* make pte visible before pmd */
pmd_populate(mm, pmd, pgtable);
page_remove_rmap(page);
VM_BUG_ON(page_mapcount(page) < 0);
add_mm_counter(tlb->mm, MM_ANONPAGES, -HPAGE_PMD_NR);
VM_BUG_ON(!PageHead(page));
+ tlb->mm->nr_ptes--;
spin_unlock(&tlb->mm->page_table_lock);
tlb_remove_page(tlb, page);
pte_free(tlb->mm, pgtable);
pte_unmap(pte);
}
- mm->nr_ptes++;
smp_wmb(); /* make pte visible before pmd */
/*
* Up to this point the pmd is present and huge and
set_pmd_at(mm, address, pmd, _pmd);
update_mmu_cache(vma, address, _pmd);
prepare_pmd_huge_pte(pgtable, mm);
- mm->nr_ptes--;
spin_unlock(&mm->page_table_lock);
#ifndef CONFIG_NUMA
set_page_dirty(page);
list_add(&page->lru, &page_list);
}
- spin_unlock(&mm->page_table_lock);
flush_tlb_range(vma, start, end);
+ spin_unlock(&mm->page_table_lock);
mmu_notifier_invalidate_range_end(mm, start, end);
list_for_each_entry_safe(page, tmp, &page_list, lru) {
page_remove_rmap(page);
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/slab.h>
-#include <linux/memcontrol.h>
#include <linux/rbtree.h>
#include <linux/memory.h>
#include <linux/mmu_notifier.h>
new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
if (new_page) {
- /*
- * The memcg-specific accounting when moving
- * pages around the LRU lists relies on the
- * page's owner (memcg) to be valid. Usually,
- * pages are assigned to a new owner before
- * being put on the LRU list, but since this
- * is not the case here, the stale owner from
- * a previous allocation cycle must be reset.
- */
- mem_cgroup_reset_owner(new_page);
copy_user_highpage(new_page, page, address, vma);
SetPageDirty(new_page);
pc = lookup_page_cgroup(page);
memcg = pc->mem_cgroup;
+
+ /*
+ * Surreptitiously switch any uncharged page to root:
+ * an uncharged page off lru does nothing to secure
+ * its former mem_cgroup from sudden removal.
+ *
+ * Our caller holds lru_lock, and PageCgroupUsed is updated
+ * under page_cgroup lock: between them, they make all uses
+ * of pc->mem_cgroup safe.
+ */
+ if (!PageCgroupUsed(pc) && memcg != root_mem_cgroup)
+ pc->mem_cgroup = memcg = root_mem_cgroup;
+
mz = page_cgroup_zoneinfo(memcg, page);
/* compound_order() is stabilized through lru_lock */
MEM_CGROUP_ZSTAT(mz, lru) += 1 << compound_order(page);
struct page *page,
unsigned int nr_pages,
struct page_cgroup *pc,
- enum charge_type ctype)
+ enum charge_type ctype,
+ bool lrucare)
{
+ struct zone *uninitialized_var(zone);
+ bool was_on_lru = false;
+
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
* we don't need page_cgroup_lock about tail pages, becase they are not
* accessed by any other context at this point.
*/
+
+ /*
+ * In some cases, SwapCache and FUSE(splice_buf->radixtree), the page
+ * may already be on some other mem_cgroup's LRU. Take care of it.
+ */
+ if (lrucare) {
+ zone = page_zone(page);
+ spin_lock_irq(&zone->lru_lock);
+ if (PageLRU(page)) {
+ ClearPageLRU(page);
+ del_page_from_lru_list(zone, page, page_lru(page));
+ was_on_lru = true;
+ }
+ }
+
pc->mem_cgroup = memcg;
/*
* We access a page_cgroup asynchronously without lock_page_cgroup().
break;
}
+ if (lrucare) {
+ if (was_on_lru) {
+ VM_BUG_ON(PageLRU(page));
+ SetPageLRU(page);
+ add_page_to_lru_list(zone, page, page_lru(page));
+ }
+ spin_unlock_irq(&zone->lru_lock);
+ }
+
mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), nr_pages);
unlock_page_cgroup(pc);
- WARN_ON_ONCE(PageLRU(page));
+
/*
* "charge_statistics" updated event counter. Then, check it.
* Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom);
if (ret == -ENOMEM)
return ret;
- __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false);
return 0;
}
__mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
enum charge_type ctype);
-static void
-__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *memcg,
- enum charge_type ctype)
-{
- struct page_cgroup *pc = lookup_page_cgroup(page);
- struct zone *zone = page_zone(page);
- unsigned long flags;
- bool removed = false;
-
- /*
- * In some case, SwapCache, FUSE(splice_buf->radixtree), the page
- * is already on LRU. It means the page may on some other page_cgroup's
- * LRU. Take care of it.
- */
- spin_lock_irqsave(&zone->lru_lock, flags);
- if (PageLRU(page)) {
- del_page_from_lru_list(zone, page, page_lru(page));
- ClearPageLRU(page);
- removed = true;
- }
- __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
- if (removed) {
- add_page_to_lru_list(zone, page, page_lru(page));
- SetPageLRU(page);
- }
- spin_unlock_irqrestore(&zone->lru_lock, flags);
- return;
-}
-
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
__mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg,
enum charge_type ctype)
{
+ struct page_cgroup *pc;
+
if (mem_cgroup_disabled())
return;
if (!memcg)
return;
cgroup_exclude_rmdir(&memcg->css);
- __mem_cgroup_commit_charge_lrucare(page, memcg, ctype);
+ pc = lookup_page_cgroup(page);
+ __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true);
/*
* Now swap is on-memory. This means this page may be
* counted both as mem and swap....double count.
batch->memcg = NULL;
}
-/*
- * A function for resetting pc->mem_cgroup for newly allocated pages.
- * This function should be called if the newpage will be added to LRU
- * before start accounting.
- */
-void mem_cgroup_reset_owner(struct page *newpage)
-{
- struct page_cgroup *pc;
-
- if (mem_cgroup_disabled())
- return;
-
- pc = lookup_page_cgroup(newpage);
- VM_BUG_ON(PageCgroupUsed(pc));
- pc->mem_cgroup = root_mem_cgroup;
-}
-
#ifdef CONFIG_SWAP
/*
* called after __delete_from_swap_cache() and drop "page" account.
ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
else
ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
- __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false);
return ret;
}
* the newpage may be on LRU(or pagevec for LRU) already. We lock
* LRU while we overwrite pc->mem_cgroup.
*/
- __mem_cgroup_commit_charge_lrucare(newpage, memcg, type);
+ __mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true);
}
#ifdef CONFIG_DEBUG_VM
unsigned long vmstart;
unsigned long vmend;
- vma = find_vma_prev(mm, start, &prev);
+ vma = find_vma(mm, start);
if (!vma || vma->vm_start > start)
return -EFAULT;
+ prev = vma->vm_prev;
if (start > vma->vm_start)
prev = vma;
if (!newpage)
return -ENOMEM;
- mem_cgroup_reset_owner(newpage);
-
if (page_count(page) == 1) {
/* page was freed from under us. So we are done. */
goto out;
return -EINVAL;
if (end == start)
return 0;
- vma = find_vma_prev(current->mm, start, &prev);
+ vma = find_vma(current->mm, start);
if (!vma || vma->vm_start > start)
return -ENOMEM;
+ prev = vma->vm_prev;
if (start > vma->vm_start)
prev = vma;
vma->vm_pgoff = pgoff;
INIT_LIST_HEAD(&vma->anon_vma_chain);
+ error = -EINVAL; /* when rejecting VM_GROWSDOWN|VM_GROWSUP */
+
if (file) {
- error = -EINVAL;
if (vm_flags & (VM_GROWSDOWN|VM_GROWSUP))
goto free_vma;
if (vm_flags & VM_DENYWRITE) {
pgoff = vma->vm_pgoff;
vm_flags = vma->vm_flags;
} else if (vm_flags & VM_SHARED) {
+ if (unlikely(vm_flags & (VM_GROWSDOWN|VM_GROWSUP)))
+ goto free_vma;
error = shmem_zero_setup(vma);
if (error)
goto free_vma;
/*
* Same as find_vma, but also return a pointer to the previous VMA in *pprev.
- * Note: pprev is set to NULL when return value is NULL.
*/
struct vm_area_struct *
find_vma_prev(struct mm_struct *mm, unsigned long addr,
struct vm_area_struct *vma;
vma = find_vma(mm, addr);
- *pprev = vma ? vma->vm_prev : NULL;
+ if (vma) {
+ *pprev = vma->vm_prev;
+ } else {
+ struct rb_node *rb_node = mm->mm_rb.rb_node;
+ *pprev = NULL;
+ while (rb_node) {
+ *pprev = rb_entry(rb_node, struct vm_area_struct, vm_rb);
+ rb_node = rb_node->rb_right;
+ }
+ }
return vma;
}
down_write(¤t->mm->mmap_sem);
- vma = find_vma_prev(current->mm, start, &prev);
+ vma = find_vma(current->mm, start);
error = -ENOMEM;
if (!vma)
goto out;
+ prev = vma->vm_prev;
if (unlikely(grows & PROT_GROWSDOWN)) {
if (vma->vm_start >= end)
goto out;
pgoff_t offset = swp_offset(ent);
struct swap_cgroup_ctrl *ctrl;
struct page *mappage;
+ struct swap_cgroup *sc;
ctrl = &swap_cgroup_ctrl[swp_type(ent)];
if (ctrlp)
*ctrlp = ctrl;
mappage = ctrl->map[offset / SC_PER_PAGE];
- return page_address(mappage) + offset % SC_PER_PAGE;
+ sc = page_address(mappage);
+ return sc + offset % SC_PER_PAGE;
}
/**
page_end - page_start);
}
- for (i = page_start; i < page_end; i++)
- __clear_bit(i, populated);
+ bitmap_clear(populated, page_start, page_end - page_start);
}
/**
void lru_add_page_tail(struct zone* zone,
struct page *page, struct page *page_tail)
{
- int active;
+ int uninitialized_var(active);
enum lru_list lru;
const int file = 0;
active = 0;
lru = LRU_INACTIVE_ANON;
}
- update_page_reclaim_stat(zone, page_tail, file, active);
} else {
SetPageUnevictable(page_tail);
lru = LRU_UNEVICTABLE;
list_head = page_tail->lru.prev;
list_move_tail(&page_tail->lru, list_head);
}
+
+ if (!PageUnevictable(page))
+ update_page_reclaim_stat(zone, page_tail, file, active);
}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
SetPageLRU(page);
if (active)
SetPageActive(page);
- update_page_reclaim_stat(zone, page, file, active);
add_page_to_lru_list(zone, page, lru);
+ update_page_reclaim_stat(zone, page, file, active);
}
/*
new_page = alloc_page_vma(gfp_mask, vma, addr);
if (!new_page)
break; /* Out of memory */
- /*
- * The memcg-specific accounting when moving
- * pages around the LRU lists relies on the
- * page's owner (memcg) to be valid. Usually,
- * pages are assigned to a new owner before
- * being put on the LRU list, but since this
- * is not the case here, the stale owner from
- * a previous allocation cycle must be reset.
- */
- mem_cgroup_reset_owner(new_page);
}
/*
ip6h->nexthdr = IPPROTO_HOPOPTS;
ip6h->hop_limit = 1;
ipv6_addr_set(&ip6h->daddr, htonl(0xff020000), 0, 0, htonl(1));
- ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
- &ip6h->saddr);
+ if (ipv6_dev_get_saddr(dev_net(br->dev), br->dev, &ip6h->daddr, 0,
+ &ip6h->saddr)) {
+ kfree_skb(skb);
+ return NULL;
+ }
ipv6_eth_mc_map(&ip6h->daddr, eth->h_dest);
hopopt = (u8 *)(ip6h + 1);
#define brnf_filter_pppoe_tagged 0
#endif
+#define IS_IP(skb) \
+ (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IP))
+
+#define IS_IPV6(skb) \
+ (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_IPV6))
+
+#define IS_ARP(skb) \
+ (!vlan_tx_tag_present(skb) && skb->protocol == htons(ETH_P_ARP))
+
static inline __be16 vlan_proto(const struct sk_buff *skb)
{
if (vlan_tx_tag_present(skb))
return NF_DROP;
br = p->br;
- if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
- IS_PPPOE_IPV6(skb)) {
+ if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb)) {
if (!brnf_call_ip6tables && !br->nf_call_ip6tables)
return NF_ACCEPT;
if (!brnf_call_iptables && !br->nf_call_iptables)
return NF_ACCEPT;
- if (skb->protocol != htons(ETH_P_IP) && !IS_VLAN_IP(skb) &&
- !IS_PPPOE_IP(skb))
+ if (!IS_IP(skb) && !IS_VLAN_IP(skb) && !IS_PPPOE_IP(skb))
return NF_ACCEPT;
nf_bridge_pull_encap_header_rcsum(skb);
struct nf_bridge_info *nf_bridge = skb->nf_bridge;
struct net_device *in;
- if (skb->protocol != htons(ETH_P_ARP) && !IS_VLAN_ARP(skb)) {
+ if (!IS_ARP(skb) && !IS_VLAN_ARP(skb)) {
in = nf_bridge->physindev;
if (nf_bridge->mask & BRNF_PKT_TYPE) {
skb->pkt_type = PACKET_OTHERHOST;
return 0;
}
+
/* This is the 'purely bridged' case. For IP, we pass the packet to
* netfilter with indev and outdev set to the bridge device,
* but we are still able to filter on the 'real' indev/outdev
if (!parent)
return NF_DROP;
- if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
- IS_PPPOE_IP(skb))
+ if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb))
pf = PF_INET;
- else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
- IS_PPPOE_IPV6(skb))
+ else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb))
pf = PF_INET6;
else
return NF_ACCEPT;
if (!brnf_call_arptables && !br->nf_call_arptables)
return NF_ACCEPT;
- if (skb->protocol != htons(ETH_P_ARP)) {
+ if (!IS_ARP(skb)) {
if (!IS_VLAN_ARP(skb))
return NF_ACCEPT;
nf_bridge_pull_encap_header(skb);
if (!realoutdev)
return NF_DROP;
- if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
- IS_PPPOE_IP(skb))
+ if (IS_IP(skb) || IS_VLAN_IP(skb) || IS_PPPOE_IP(skb))
pf = PF_INET;
- else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
- IS_PPPOE_IPV6(skb))
+ else if (IS_IPV6(skb) || IS_VLAN_IPV6(skb) || IS_PPPOE_IPV6(skb))
pf = PF_INET6;
else
return NF_ACCEPT;
#include "br_private_stp.h"
/* since time values in bpdu are in jiffies and then scaled (1/256)
- * before sending, make sure that is at least one.
+ * before sending, make sure that is at least one STP tick.
*/
-#define MESSAGE_AGE_INCR ((HZ < 256) ? 1 : (HZ/256))
+#define MESSAGE_AGE_INCR ((HZ / 256) + 1)
static const char *const br_port_state_names[] = {
[BR_STATE_DISABLED] = "disabled",
void br_log_state(const struct net_bridge_port *p)
{
- br_info(p->br, "port %u(%s) entering %s state\n",
+ br_info(p->br, "port %u(%s) entered %s state\n",
(unsigned) p->port_no, p->dev->name,
br_port_state_names[p->state]);
}
p->designated_cost = bpdu->root_path_cost;
p->designated_bridge = bpdu->bridge_id;
p->designated_port = bpdu->port_id;
- p->designated_age = jiffies + bpdu->message_age;
+ p->designated_age = jiffies - bpdu->message_age;
mod_timer(&p->message_age_timer, jiffies
+ (p->br->max_age - bpdu->message_age));
struct net_bridge *br = p->br;
int wasroot;
- br_log_state(p);
-
wasroot = br_is_root_bridge(br);
br_become_designated_port(p);
p->state = BR_STATE_DISABLED;
p->topology_change_ack = 0;
p->config_pending = 0;
+ br_log_state(p);
br_ifinfo_notify(RTM_NEWLINK, p);
del_timer(&p->message_age_timer);
const char *base, char __user *ubase)
{
char __user *hlp = ubase + ((char *)m - base);
- if (copy_to_user(hlp, m->u.match->name, EBT_FUNCTION_MAXNAMELEN))
+ char name[EBT_FUNCTION_MAXNAMELEN] = {};
+
+ /* ebtables expects 32 bytes long names but xt_match names are 29 bytes
+ long. Copy 29 bytes and fill remaining bytes with zeroes. */
+ strncpy(name, m->u.match->name, sizeof(name));
+ if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN))
return -EFAULT;
return 0;
}
const char *base, char __user *ubase)
{
char __user *hlp = ubase + ((char *)w - base);
- if (copy_to_user(hlp , w->u.watcher->name, EBT_FUNCTION_MAXNAMELEN))
+ char name[EBT_FUNCTION_MAXNAMELEN] = {};
+
+ strncpy(name, w->u.watcher->name, sizeof(name));
+ if (copy_to_user(hlp , name, EBT_FUNCTION_MAXNAMELEN))
return -EFAULT;
return 0;
}
int ret;
char __user *hlp;
const struct ebt_entry_target *t;
+ char name[EBT_FUNCTION_MAXNAMELEN] = {};
if (e->bitmask == 0)
return 0;
ret = EBT_WATCHER_ITERATE(e, ebt_make_watchername, base, ubase);
if (ret != 0)
return ret;
- if (copy_to_user(hlp, t->u.target->name, EBT_FUNCTION_MAXNAMELEN))
+ strncpy(name, t->u.target->name, sizeof(name));
+ if (copy_to_user(hlp, name, EBT_FUNCTION_MAXNAMELEN))
return -EFAULT;
return 0;
}
switch (compat_mwt) {
case EBT_COMPAT_MATCH:
- match = try_then_request_module(xt_find_match(NFPROTO_BRIDGE,
- name, 0), "ebt_%s", name);
- if (match == NULL)
- return -ENOENT;
+ match = xt_request_find_match(NFPROTO_BRIDGE, name, 0);
if (IS_ERR(match))
return PTR_ERR(match);
break;
case EBT_COMPAT_WATCHER: /* fallthrough */
case EBT_COMPAT_TARGET:
- wt = try_then_request_module(xt_find_target(NFPROTO_BRIDGE,
- name, 0), "ebt_%s", name);
- if (wt == NULL)
- return -ENOENT;
+ wt = xt_request_find_target(NFPROTO_BRIDGE, name, 0);
if (IS_ERR(wt))
return PTR_ERR(wt);
off = xt_compat_target_offset(wt);
rcu_read_lock();
cb->seq = net->dev_base_seq;
- nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
- ifla_policy);
+ if (nlmsg_parse(cb->nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+ ifla_policy) >= 0) {
- if (tb[IFLA_EXT_MASK])
- ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+ }
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
u32 ext_filter_mask = 0;
u16 min_ifinfo_dump_size = 0;
- nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX, ifla_policy);
-
- if (tb[IFLA_EXT_MASK])
- ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+ if (nlmsg_parse(nlh, sizeof(struct rtgenmsg), tb, IFLA_MAX,
+ ifla_policy) >= 0) {
+ if (tb[IFLA_EXT_MASK])
+ ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
+ }
if (!ext_filter_mask)
return NLMSG_GOODSIZE;
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/net.h>
+#include <linux/workqueue.h>
#include <net/ip.h>
#include <net/inetpeer.h>
#include <net/secure_seq.h>
static struct kmem_cache *peer_cachep __read_mostly;
+static LIST_HEAD(gc_list);
+static const int gc_delay = 60 * HZ;
+static struct delayed_work gc_work;
+static DEFINE_SPINLOCK(gc_lock);
+
#define node_height(x) x->avl_height
#define peer_avl_empty ((struct inet_peer *)&peer_fake_node)
int inet_peer_minttl __read_mostly = 120 * HZ; /* TTL under high load: 120 sec */
int inet_peer_maxttl __read_mostly = 10 * 60 * HZ; /* usual time to live: 10 min */
+static void inetpeer_gc_worker(struct work_struct *work)
+{
+ struct inet_peer *p, *n;
+ LIST_HEAD(list);
+
+ spin_lock_bh(&gc_lock);
+ list_replace_init(&gc_list, &list);
+ spin_unlock_bh(&gc_lock);
+
+ if (list_empty(&list))
+ return;
+
+ list_for_each_entry_safe(p, n, &list, gc_list) {
+
+ if(need_resched())
+ cond_resched();
+
+ if (p->avl_left != peer_avl_empty) {
+ list_add_tail(&p->avl_left->gc_list, &list);
+ p->avl_left = peer_avl_empty;
+ }
+
+ if (p->avl_right != peer_avl_empty) {
+ list_add_tail(&p->avl_right->gc_list, &list);
+ p->avl_right = peer_avl_empty;
+ }
+
+ n = list_entry(p->gc_list.next, struct inet_peer, gc_list);
+
+ if (!atomic_read(&p->refcnt)) {
+ list_del(&p->gc_list);
+ kmem_cache_free(peer_cachep, p);
+ }
+ }
+
+ if (list_empty(&list))
+ return;
+
+ spin_lock_bh(&gc_lock);
+ list_splice(&list, &gc_list);
+ spin_unlock_bh(&gc_lock);
+
+ schedule_delayed_work(&gc_work, gc_delay);
+}
/* Called from ip_output.c:ip_init */
void __init inet_initpeers(void)
0, SLAB_HWCACHE_ALIGN | SLAB_PANIC,
NULL);
+ INIT_DELAYED_WORK_DEFERRABLE(&gc_work, inetpeer_gc_worker);
}
static int addr_compare(const struct inetpeer_addr *a,
p->rate_last = 0;
p->pmtu_expires = 0;
p->pmtu_orig = 0;
- p->redirect_genid = 0;
memset(&p->redirect_learned, 0, sizeof(p->redirect_learned));
-
+ INIT_LIST_HEAD(&p->gc_list);
/* Link the node. */
link_to_pool(p, base);
return rc;
}
EXPORT_SYMBOL(inet_peer_xrlim_allow);
+
+void inetpeer_invalidate_tree(int family)
+{
+ struct inet_peer *old, *new, *prev;
+ struct inet_peer_base *base = family_to_base(family);
+
+ write_seqlock_bh(&base->lock);
+
+ old = base->root;
+ if (old == peer_avl_empty_rcu)
+ goto out;
+
+ new = peer_avl_empty_rcu;
+
+ prev = cmpxchg(&base->root, old, new);
+ if (prev == old) {
+ base->total = 0;
+ spin_lock(&gc_lock);
+ list_add_tail(&prev->gc_list, &gc_list);
+ spin_unlock(&gc_lock);
+ schedule_delayed_work(&gc_work, gc_delay);
+ }
+
+out:
+ write_sequnlock_bh(&base->lock);
+}
+EXPORT_SYMBOL(inetpeer_invalidate_tree);
static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
static int ip_rt_min_advmss __read_mostly = 256;
static int rt_chain_length_max __read_mostly = 20;
-static int redirect_genid;
static struct delayed_work expires_work;
static unsigned long expires_ljiffies;
get_random_bytes(&shuffle, sizeof(shuffle));
atomic_add(shuffle + 1U, &net->ipv4.rt_genid);
- redirect_genid++;
+ inetpeer_invalidate_tree(AF_INET);
}
/*
peer = rt->peer;
if (peer) {
- if (peer->redirect_learned.a4 != new_gw ||
- peer->redirect_genid != redirect_genid) {
+ if (peer->redirect_learned.a4 != new_gw) {
peer->redirect_learned.a4 = new_gw;
- peer->redirect_genid = redirect_genid;
atomic_inc(&__rt_peer_genid);
}
check_peer_redir(&rt->dst, peer);
if (peer) {
check_peer_pmtu(&rt->dst, peer);
- if (peer->redirect_genid != redirect_genid)
- peer->redirect_learned.a4 = 0;
if (peer->redirect_learned.a4 &&
peer->redirect_learned.a4 != rt->rt_gateway)
check_peer_redir(&rt->dst, peer);
dst_init_metrics(&rt->dst, peer->metrics, false);
check_peer_pmtu(&rt->dst, peer);
- if (peer->redirect_genid != redirect_genid)
- peer->redirect_learned.a4 = 0;
+
if (peer->redirect_learned.a4 &&
peer->redirect_learned.a4 != rt->rt_gateway) {
rt->rt_gateway = peer->redirect_learned.a4;
BUG_ON(!pcount);
- /* Adjust hint for FACK. Non-FACK is handled in tcp_sacktag_one(). */
- if (tcp_is_fack(tp) && (skb == tp->lost_skb_hint))
+ /* Adjust counters and hints for the newly sacked sequence
+ * range but discard the return value since prev is already
+ * marked. We must tag the range first because the seq
+ * advancement below implicitly advances
+ * tcp_highest_sack_seq() when skb is highest_sack.
+ */
+ tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
+ start_seq, end_seq, dup_sack, pcount);
+
+ if (skb == tp->lost_skb_hint)
tp->lost_cnt_hint += pcount;
TCP_SKB_CB(prev)->end_seq += shifted;
skb_shinfo(skb)->gso_type = 0;
}
- /* Adjust counters and hints for the newly sacked sequence range but
- * discard the return value since prev is already marked.
- */
- tcp_sacktag_one(sk, state, TCP_SKB_CB(skb)->sacked,
- start_seq, end_seq, dup_sack, pcount);
-
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
}
}
+ /* tcp_sacktag_one() won't SACK-tag ranges below snd_una */
+ if (!after(TCP_SKB_CB(skb)->seq + len, tp->snd_una))
+ goto fallback;
+
if (!skb_shift(prev, skb, len))
goto fallback;
if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
if (cnt > packets) {
if ((tcp_is_sack(tp) && !tcp_is_fack(tp)) ||
+ (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) ||
(oldcnt >= packets))
break;
/* Join all-node multicast group */
ipv6_dev_mc_inc(dev, &in6addr_linklocal_allnodes);
+ /* Join all-router multicast group if forwarding is set */
+ if (ndev->cnf.forwarding && dev && (dev->flags & IFF_MULTICAST))
+ ipv6_dev_mc_inc(dev, &in6addr_linklocal_allrouters);
+
return ndev;
}
hw_roc = true;
list_for_each_entry(sdata, &local->interfaces, list) {
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+ continue;
if (sdata->old_idle == sdata->vif.bss_conf.idle)
continue;
if (!ieee80211_sdata_running(sdata))
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
info->control.rates[i].idx = -1;
info->control.rates[i].flags = 0;
- info->control.rates[i].count = 1;
+ info->control.rates[i].count = 0;
}
if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
if (del_timer(&ct->timeout)) {
death_by_timeout((unsigned long)ct);
- dropped = 1;
- NF_CT_STAT_INC_ATOMIC(net, early_drop);
+ /* Check if we indeed killed this entry. Reliable event
+ delivery may have inserted it into the dying list. */
+ if (test_bit(IPS_DYING_BIT, &ct->status)) {
+ dropped = 1;
+ NF_CT_STAT_INC_ATOMIC(net, early_drop);
+ }
}
nf_ct_put(ct);
return dropped;
if (!parse_nat_setup) {
#ifdef CONFIG_MODULES
rcu_read_unlock();
- spin_unlock_bh(&nf_conntrack_lock);
nfnl_unlock();
if (request_module("nf-nat-ipv4") < 0) {
nfnl_lock();
- spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
return -EOPNOTSUPP;
}
nfnl_lock();
- spin_lock_bh(&nf_conntrack_lock);
rcu_read_lock();
if (nfnetlink_parse_nat_setup_hook)
return -EAGAIN;
/*
- * Copyright (c) 2007-2011 Nicira Networks.
+ * Copyright (c) 2007-2012 Nicira Networks.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
inet_proto_csum_replace4(&tcp_hdr(skb)->check, skb,
*addr, new_addr, 1);
} else if (nh->protocol == IPPROTO_UDP) {
- if (likely(transport_len >= sizeof(struct udphdr)))
- inet_proto_csum_replace4(&udp_hdr(skb)->check, skb,
- *addr, new_addr, 1);
+ if (likely(transport_len >= sizeof(struct udphdr))) {
+ struct udphdr *uh = udp_hdr(skb);
+
+ if (uh->check || skb->ip_summed == CHECKSUM_PARTIAL) {
+ inet_proto_csum_replace4(&uh->check, skb,
+ *addr, new_addr, 1);
+ if (!uh->check)
+ uh->check = CSUM_MANGLED_0;
+ }
+ }
}
csum_replace4(&nh->check, *addr, new_addr);
skb->rxhash = 0;
}
-static int set_udp_port(struct sk_buff *skb,
- const struct ovs_key_udp *udp_port_key)
+static void set_udp_port(struct sk_buff *skb, __be16 *port, __be16 new_port)
+{
+ struct udphdr *uh = udp_hdr(skb);
+
+ if (uh->check && skb->ip_summed != CHECKSUM_PARTIAL) {
+ set_tp_port(skb, port, new_port, &uh->check);
+
+ if (!uh->check)
+ uh->check = CSUM_MANGLED_0;
+ } else {
+ *port = new_port;
+ skb->rxhash = 0;
+ }
+}
+
+static int set_udp(struct sk_buff *skb, const struct ovs_key_udp *udp_port_key)
{
struct udphdr *uh;
int err;
uh = udp_hdr(skb);
if (udp_port_key->udp_src != uh->source)
- set_tp_port(skb, &uh->source, udp_port_key->udp_src, &uh->check);
+ set_udp_port(skb, &uh->source, udp_port_key->udp_src);
if (udp_port_key->udp_dst != uh->dest)
- set_tp_port(skb, &uh->dest, udp_port_key->udp_dst, &uh->check);
+ set_udp_port(skb, &uh->dest, udp_port_key->udp_dst);
return 0;
}
-static int set_tcp_port(struct sk_buff *skb,
- const struct ovs_key_tcp *tcp_port_key)
+static int set_tcp(struct sk_buff *skb, const struct ovs_key_tcp *tcp_port_key)
{
struct tcphdr *th;
int err;
break;
case OVS_KEY_ATTR_TCP:
- err = set_tcp_port(skb, nla_data(nested_attr));
+ err = set_tcp(skb, nla_data(nested_attr));
break;
case OVS_KEY_ATTR_UDP:
- err = set_udp_port(skb, nla_data(nested_attr));
+ err = set_udp(skb, nla_data(nested_attr));
break;
}
vport = ovs_vport_locate(nla_data(a[OVS_VPORT_ATTR_NAME]));
if (!vport)
return ERR_PTR(-ENODEV);
+ if (ovs_header->dp_ifindex &&
+ ovs_header->dp_ifindex != get_dpifindex(vport->dp))
+ return ERR_PTR(-ENODEV);
return vport;
} else if (a[OVS_VPORT_ATTR_PORT_NO]) {
u32 port_no = nla_get_u32(a[OVS_VPORT_ATTR_PORT_NO]);
*/
static void alc_init_special_input_src(struct hda_codec *codec);
+static int alc269_fill_coef(struct hda_codec *codec);
static int alc_init(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
unsigned int i;
+ if (codec->vendor_id == 0x10ec0269)
+ alc269_fill_coef(codec);
+
alc_fix_pll(codec);
alc_auto_init_amp(codec, spec->init_amp);
ALC882_FIXUP_PB_M5210,
ALC882_FIXUP_ACER_ASPIRE_7736,
ALC882_FIXUP_ASUS_W90V,
+ ALC889_FIXUP_CD,
ALC889_FIXUP_VAIO_TT,
ALC888_FIXUP_EEE1601,
ALC882_FIXUP_EAPD,
{ }
}
},
+ [ALC889_FIXUP_CD] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x1c, 0x993301f0 }, /* CD */
+ { }
+ }
+ },
[ALC889_FIXUP_VAIO_TT] = {
.type = ALC_FIXUP_PINS,
.v.pins = (const struct alc_pincfg[]) {
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK_VENDOR(0x1462, "MSI", ALC882_FIXUP_GPIO3),
+ SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte EP45-DS3", ALC889_FIXUP_CD),
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", ALC882_FIXUP_ABIT_AW9D_MAX),
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
static int alc269_fill_coef(struct hda_codec *codec)
{
+ struct alc_spec *spec = codec->spec;
int val;
+ if (spec->codec_variant != ALC269_TYPE_ALC269VB)
+ return 0;
+
if ((alc_get_coef0(codec) & 0x00ff) < 0x015) {
alc_write_coef_idx(codec, 0xf, 0x960b);
alc_write_coef_idx(codec, 0xe, 0x8817);
hw->ops.open = snd_hdspm_hwdep_dummy_op;
hw->ops.ioctl = snd_hdspm_hwdep_ioctl;
+ hw->ops.ioctl_compat = snd_hdspm_hwdep_ioctl;
hw->ops.release = snd_hdspm_hwdep_dummy_op;
return 0;
.platform_name = "samsung-audio",
.cpu_dai_name = "s3c24xx-iis",
.codec_dai_name = "wm8753-hifi",
- .codec_name = "wm8753-codec.0-001a",
+ .codec_name = "wm8753.0-001a",
.init = neo1973_wm8753_init,
.ops = &neo1973_hifi_ops,
},
.stream_name = "Voice",
.cpu_dai_name = "dfbmcs320-pcm",
.codec_dai_name = "wm8753-voice",
- .codec_name = "wm8753-codec.0-001a",
+ .codec_name = "wm8753.0-001a",
.ops = &neo1973_voice_ops,
},
};
if (opts->group && pos != first)
group_fd = first->fd;
+fallback_missing_features:
+ if (opts->exclude_guest_missing)
+ attr->exclude_guest = attr->exclude_host = 0;
retry_sample_id:
attr->sample_id_all = opts->sample_id_all_avail ? 1 : 0;
try_again:
} else if (err == ENODEV && opts->cpu_list) {
die("No such device - did you specify"
" an out-of-range profile CPU?\n");
- } else if (err == EINVAL && opts->sample_id_all_avail) {
- /*
- * Old kernel, no attr->sample_id_type_all field
- */
- opts->sample_id_all_avail = false;
- if (!opts->sample_time && !opts->raw_samples && !time_needed)
- attr->sample_type &= ~PERF_SAMPLE_TIME;
-
- goto retry_sample_id;
+ } else if (err == EINVAL) {
+ if (!opts->exclude_guest_missing &&
+ (attr->exclude_guest || attr->exclude_host)) {
+ pr_debug("Old kernel, cannot exclude "
+ "guest or host samples.\n");
+ opts->exclude_guest_missing = true;
+ goto fallback_missing_features;
+ } else if (opts->sample_id_all_avail) {
+ /*
+ * Old kernel, no attr->sample_id_type_all field
+ */
+ opts->sample_id_all_avail = false;
+ if (!opts->sample_time && !opts->raw_samples && !time_needed)
+ attr->sample_type &= ~PERF_SAMPLE_TIME;
+
+ goto retry_sample_id;
+ }
}
/*
return err;
}
- if (!!rec->no_buildid
+ if (!rec->no_buildid
&& !perf_header__has_feat(&session->header, HEADER_BUILD_ID)) {
- pr_err("Couldn't generating buildids. "
+ pr_err("Couldn't generate buildids. "
"Use --no-buildid to profile anyway.\n");
return -1;
}
attr->mmap = 1;
attr->comm = 1;
attr->inherit = top->inherit;
+fallback_missing_features:
+ if (top->exclude_guest_missing)
+ attr->exclude_guest = attr->exclude_host = 0;
retry_sample_id:
attr->sample_id_all = top->sample_id_all_avail ? 1 : 0;
try_again:
if (err == EPERM || err == EACCES) {
ui__error_paranoid();
goto out_err;
- } else if (err == EINVAL && top->sample_id_all_avail) {
- /*
- * Old kernel, no attr->sample_id_type_all field
- */
- top->sample_id_all_avail = false;
- goto retry_sample_id;
+ } else if (err == EINVAL) {
+ if (!top->exclude_guest_missing &&
+ (attr->exclude_guest || attr->exclude_host)) {
+ pr_debug("Old kernel, cannot exclude "
+ "guest or host samples.\n");
+ top->exclude_guest_missing = true;
+ goto fallback_missing_features;
+ } else if (top->sample_id_all_avail) {
+ /*
+ * Old kernel, no attr->sample_id_type_all field
+ */
+ top->sample_id_all_avail = false;
+ goto retry_sample_id;
+ }
}
/*
* If it's cycles then fall back to hrtimer
bool sample_address;
bool sample_time;
bool sample_id_all_avail;
+ bool exclude_guest_missing;
bool system_wide;
bool period;
unsigned int freq;
bool inherit;
bool group;
bool sample_id_all_avail;
+ bool exclude_guest_missing;
bool dump_symtab;
const char *cpu_list;
struct hist_entry *sym_filter_entry;
* XXX We need to find a better place for these things...
*/
bool perf_host = true;
-bool perf_guest = true;
+bool perf_guest = false;
void event_attr_init(struct perf_event_attr *attr)
{
projects / linux-flexiantxendom0-3.2.10.git / commitdiff