[media] rc-core: fix winbond-cir issues

The conversion of winbond-cir to use rc-core seems to have missed a
a few bits and pieces which were in my local tree. Kudos to
Juan Jesús García de Soria Lucena <skandalfo@gmail.com> for noticing.

[mchehab@redhat.com: fix two UTF-8 violations]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 5d06b89..18e70d1 100644 (file)
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -6,8 +6,8 @@
  *  could probably support others (Winbond WEC102X, NatSemi, etc)
  *  with minor modifications.
  *
- *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
+ *  Original Author: David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2011 David Härdeman <david@hardeman.nu>
  *
  *  Dedicated to my daughter Matilda, without whose loving attention this
  *  driver would have been finished in half the time and with a fraction
@@ -876,18 +876,8 @@ wbcir_init_hw(struct wbcir_data *data)
        /* prescaler 1.0, tx/rx fifo lvl 16 */
        outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
 
-       /* Set baud divisor to generate one byte per bit/cell */
-       switch (protocol) {
-       case IR_PROTOCOL_RC5:
-               outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
-               break;
-       case IR_PROTOCOL_RC6:
-               outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
-               break;
-       case IR_PROTOCOL_NEC:
-               outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
-               break;
-       }
+       /* Set baud divisor to sample every 10 us */
+       outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
        outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
 
        /* Set CEIR mode */
@@ -896,9 +886,9 @@ wbcir_init_hw(struct wbcir_data *data)
        inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
        inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
 
-       /* Disable RX demod, run-length encoding/decoding, set freq span */
+       /* Disable RX demod, enable run-length enc/dec, set freq span */
        wbcir_select_bank(data, WBCIR_BANK_7);
-       outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
+       outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
 
        /* Disable timer */
        wbcir_select_bank(data, WBCIR_BANK_4);