--- /dev/null
+ /*
+ * Performance event support - powerpc architecture code
+ *
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+ #include <linux/kernel.h>
+ #include <linux/sched.h>
+ #include <linux/perf_event.h>
+ #include <linux/percpu.h>
+ #include <linux/hardirq.h>
+ #include <asm/reg.h>
+ #include <asm/pmc.h>
+ #include <asm/machdep.h>
+ #include <asm/firmware.h>
+ #include <asm/ptrace.h>
+
+ struct cpu_hw_events {
+ int n_events;
+ int n_percpu;
+ int disabled;
+ int n_added;
+ int n_limited;
+ u8 pmcs_enabled;
+ struct perf_event *event[MAX_HWEVENTS];
+ u64 events[MAX_HWEVENTS];
+ unsigned int flags[MAX_HWEVENTS];
+ unsigned long mmcr[3];
+ struct perf_event *limited_counter[MAX_LIMITED_HWCOUNTERS];
+ u8 limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+ u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+ unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+ unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+
+ unsigned int group_flag;
+ int n_txn_start;
+ };
+ DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+ struct power_pmu *ppmu;
+
+ /*
+ * Normally, to ignore kernel events we set the FCS (freeze counters
+ * in supervisor mode) bit in MMCR0, but if the kernel runs with the
+ * hypervisor bit set in the MSR, or if we are running on a processor
+ * where the hypervisor bit is forced to 1 (as on Apple G5 processors),
+ * then we need to use the FCHV bit to ignore kernel events.
+ */
+ static unsigned int freeze_events_kernel = MMCR0_FCS;
+
+ /*
+ * 32-bit doesn't have MMCRA but does have an MMCR2,
+ * and a few other names are different.
+ */
+ #ifdef CONFIG_PPC32
+
+ #define MMCR0_FCHV 0
+ #define MMCR0_PMCjCE MMCR0_PMCnCE
+
+ #define SPRN_MMCRA SPRN_MMCR2
+ #define MMCRA_SAMPLE_ENABLE 0
+
+ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+ {
+ return 0;
+ }
+ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
+ static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+ {
+ return 0;
+ }
+ static inline void perf_read_regs(struct pt_regs *regs) { }
+ static inline int perf_intr_is_nmi(struct pt_regs *regs)
+ {
+ return 0;
+ }
+
+ #endif /* CONFIG_PPC32 */
+
+ /*
+ * Things that are specific to 64-bit implementations.
+ */
+ #ifdef CONFIG_PPC64
+
+ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
+ {
+ unsigned long mmcra = regs->dsisr;
+
+ if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) {
+ unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT;
+ if (slot > 1)
+ return 4 * (slot - 1);
+ }
+ return 0;
+ }
+
+ /*
+ * The user wants a data address recorded.
+ * If we're not doing instruction sampling, give them the SDAR
+ * (sampled data address). If we are doing instruction sampling, then
+ * only give them the SDAR if it corresponds to the instruction
+ * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC
+ * bit in MMCRA.
+ */
+ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
+ {
+ unsigned long mmcra = regs->dsisr;
+ unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ?
+ POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC;
+
+ if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
+ *addrp = mfspr(SPRN_SDAR);
+ }
+
+ static inline u32 perf_get_misc_flags(struct pt_regs *regs)
+ {
+ unsigned long mmcra = regs->dsisr;
+ unsigned long sihv = MMCRA_SIHV;
+ unsigned long sipr = MMCRA_SIPR;
+
+ if (TRAP(regs) != 0xf00)
+ return 0; /* not a PMU interrupt */
+
+ if (ppmu->flags & PPMU_ALT_SIPR) {
+ sihv = POWER6_MMCRA_SIHV;
+ sipr = POWER6_MMCRA_SIPR;
+ }
+
+ /* PR has priority over HV, so order below is important */
+ if (mmcra & sipr)
+ return PERF_RECORD_MISC_USER;
+ if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
+ return PERF_RECORD_MISC_HYPERVISOR;
+ return PERF_RECORD_MISC_KERNEL;
+ }
+
+ /*
+ * Overload regs->dsisr to store MMCRA so we only need to read it once
+ * on each interrupt.
+ */
+ static inline void perf_read_regs(struct pt_regs *regs)
+ {
+ regs->dsisr = mfspr(SPRN_MMCRA);
+ }
+
+ /*
+ * If interrupts were soft-disabled when a PMU interrupt occurs, treat
+ * it as an NMI.
+ */
+ static inline int perf_intr_is_nmi(struct pt_regs *regs)
+ {
+ return !regs->softe;
+ }
+
+ #endif /* CONFIG_PPC64 */
+
+ static void perf_event_interrupt(struct pt_regs *regs);
+
+ void perf_event_print_debug(void)
+ {
+ }
+
+ /*
+ * Read one performance monitor counter (PMC).
+ */
+ static unsigned long read_pmc(int idx)
+ {
+ unsigned long val;
+
+ switch (idx) {
+ case 1:
+ val = mfspr(SPRN_PMC1);
+ break;
+ case 2:
+ val = mfspr(SPRN_PMC2);
+ break;
+ case 3:
+ val = mfspr(SPRN_PMC3);
+ break;
+ case 4:
+ val = mfspr(SPRN_PMC4);
+ break;
+ case 5:
+ val = mfspr(SPRN_PMC5);
+ break;
+ case 6:
+ val = mfspr(SPRN_PMC6);
+ break;
+ #ifdef CONFIG_PPC64
+ case 7:
+ val = mfspr(SPRN_PMC7);
+ break;
+ case 8:
+ val = mfspr(SPRN_PMC8);
+ break;
+ #endif /* CONFIG_PPC64 */
+ default:
+ printk(KERN_ERR "oops trying to read PMC%d\n", idx);
+ val = 0;
+ }
+ return val;
+ }
+
+ /*
+ * Write one PMC.
+ */
+ static void write_pmc(int idx, unsigned long val)
+ {
+ switch (idx) {
+ case 1:
+ mtspr(SPRN_PMC1, val);
+ break;
+ case 2:
+ mtspr(SPRN_PMC2, val);
+ break;
+ case 3:
+ mtspr(SPRN_PMC3, val);
+ break;
+ case 4:
+ mtspr(SPRN_PMC4, val);
+ break;
+ case 5:
+ mtspr(SPRN_PMC5, val);
+ break;
+ case 6:
+ mtspr(SPRN_PMC6, val);
+ break;
+ #ifdef CONFIG_PPC64
+ case 7:
+ mtspr(SPRN_PMC7, val);
+ break;
+ case 8:
+ mtspr(SPRN_PMC8, val);
+ break;
+ #endif /* CONFIG_PPC64 */
+ default:
+ printk(KERN_ERR "oops trying to write PMC%d\n", idx);
+ }
+ }
+
+ /*
+ * Check if a set of events can all go on the PMU at once.
+ * If they can't, this will look at alternative codes for the events
+ * and see if any combination of alternative codes is feasible.
+ * The feasible set is returned in event_id[].
+ */
+ static int power_check_constraints(struct cpu_hw_events *cpuhw,
+ u64 event_id[], unsigned int cflags[],
+ int n_ev)
+ {
+ unsigned long mask, value, nv;
+ unsigned long smasks[MAX_HWEVENTS], svalues[MAX_HWEVENTS];
+ int n_alt[MAX_HWEVENTS], choice[MAX_HWEVENTS];
+ int i, j;
+ unsigned long addf = ppmu->add_fields;
+ unsigned long tadd = ppmu->test_adder;
+
+ if (n_ev > ppmu->n_counter)
+ return -1;
+
+ /* First see if the events will go on as-is */
+ for (i = 0; i < n_ev; ++i) {
+ if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
+ && !ppmu->limited_pmc_event(event_id[i])) {
+ ppmu->get_alternatives(event_id[i], cflags[i],
+ cpuhw->alternatives[i]);
+ event_id[i] = cpuhw->alternatives[i][0];
+ }
+ if (ppmu->get_constraint(event_id[i], &cpuhw->amasks[i][0],
+ &cpuhw->avalues[i][0]))
+ return -1;
+ }
+ value = mask = 0;
+ for (i = 0; i < n_ev; ++i) {
+ nv = (value | cpuhw->avalues[i][0]) +
+ (value & cpuhw->avalues[i][0] & addf);
+ if ((((nv + tadd) ^ value) & mask) != 0 ||
+ (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+ cpuhw->amasks[i][0]) != 0)
+ break;
+ value = nv;
+ mask |= cpuhw->amasks[i][0];
+ }
+ if (i == n_ev)
+ return 0; /* all OK */
+
+ /* doesn't work, gather alternatives... */
+ if (!ppmu->get_alternatives)
+ return -1;
+ for (i = 0; i < n_ev; ++i) {
+ choice[i] = 0;
+ n_alt[i] = ppmu->get_alternatives(event_id[i], cflags[i],
+ cpuhw->alternatives[i]);
+ for (j = 1; j < n_alt[i]; ++j)
+ ppmu->get_constraint(cpuhw->alternatives[i][j],
+ &cpuhw->amasks[i][j],
+ &cpuhw->avalues[i][j]);
+ }
+
+ /* enumerate all possibilities and see if any will work */
+ i = 0;
+ j = -1;
+ value = mask = nv = 0;
+ while (i < n_ev) {
+ if (j >= 0) {
+ /* we're backtracking, restore context */
+ value = svalues[i];
+ mask = smasks[i];
+ j = choice[i];
+ }
+ /*
+ * See if any alternative k for event_id i,
+ * where k > j, will satisfy the constraints.
+ */
+ while (++j < n_alt[i]) {
+ nv = (value | cpuhw->avalues[i][j]) +
+ (value & cpuhw->avalues[i][j] & addf);
+ if ((((nv + tadd) ^ value) & mask) == 0 &&
+ (((nv + tadd) ^ cpuhw->avalues[i][j])
+ & cpuhw->amasks[i][j]) == 0)
+ break;
+ }
+ if (j >= n_alt[i]) {
+ /*
+ * No feasible alternative, backtrack
+ * to event_id i-1 and continue enumerating its
+ * alternatives from where we got up to.
+ */
+ if (--i < 0)
+ return -1;
+ } else {
+ /*
+ * Found a feasible alternative for event_id i,
+ * remember where we got up to with this event_id,
+ * go on to the next event_id, and start with
+ * the first alternative for it.
+ */
+ choice[i] = j;
+ svalues[i] = value;
+ smasks[i] = mask;
+ value = nv;
+ mask |= cpuhw->amasks[i][j];
+ ++i;
+ j = -1;
+ }
+ }
+
+ /* OK, we have a feasible combination, tell the caller the solution */
+ for (i = 0; i < n_ev; ++i)
+ event_id[i] = cpuhw->alternatives[i][choice[i]];
+ return 0;
+ }
+
+ /*
+ * Check if newly-added events have consistent settings for
+ * exclude_{user,kernel,hv} with each other and any previously
+ * added events.
+ */
+ static int check_excludes(struct perf_event **ctrs, unsigned int cflags[],
+ int n_prev, int n_new)
+ {
+ int eu = 0, ek = 0, eh = 0;
+ int i, n, first;
+ struct perf_event *event;
+
+ n = n_prev + n_new;
+ if (n <= 1)
+ return 0;
+
+ first = 1;
+ for (i = 0; i < n; ++i) {
+ if (cflags[i] & PPMU_LIMITED_PMC_OK) {
+ cflags[i] &= ~PPMU_LIMITED_PMC_REQD;
+ continue;
+ }
+ event = ctrs[i];
+ if (first) {
+ eu = event->attr.exclude_user;
+ ek = event->attr.exclude_kernel;
+ eh = event->attr.exclude_hv;
+ first = 0;
+ } else if (event->attr.exclude_user != eu ||
+ event->attr.exclude_kernel != ek ||
+ event->attr.exclude_hv != eh) {
+ return -EAGAIN;
+ }
+ }
+
+ if (eu || ek || eh)
+ for (i = 0; i < n; ++i)
+ if (cflags[i] & PPMU_LIMITED_PMC_OK)
+ cflags[i] |= PPMU_LIMITED_PMC_REQD;
+
+ return 0;
+ }
+
+ static u64 check_and_compute_delta(u64 prev, u64 val)
+ {
+ u64 delta = (val - prev) & 0xfffffffful;
+
+ /*
+ * POWER7 can roll back counter values, if the new value is smaller
+ * than the previous value it will cause the delta and the counter to
+ * have bogus values unless we rolled a counter over. If a coutner is
+ * rolled back, it will be smaller, but within 256, which is the maximum
+ * number of events to rollback at once. If we dectect a rollback
+ * return 0. This can lead to a small lack of precision in the
+ * counters.
+ */
+ if (prev > val && (prev - val) < 256)
+ delta = 0;
+
+ return delta;
+ }
+
+ static void power_pmu_read(struct perf_event *event)
+ {
+ s64 val, delta, prev;
+
+ if (event->hw.state & PERF_HES_STOPPED)
+ return;
+
+ if (!event->hw.idx)
+ return;
+ /*
+ * Performance monitor interrupts come even when interrupts
+ * are soft-disabled, as long as interrupts are hard-enabled.
+ * Therefore we treat them like NMIs.
+ */
+ do {
+ prev = local64_read(&event->hw.prev_count);
+ barrier();
+ val = read_pmc(event->hw.idx);
+ delta = check_and_compute_delta(prev, val);
+ if (!delta)
+ return;
+ } while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+
+ local64_add(delta, &event->count);
+ local64_sub(delta, &event->hw.period_left);
+ }
+
+ /*
+ * On some machines, PMC5 and PMC6 can't be written, don't respect
+ * the freeze conditions, and don't generate interrupts. This tells
+ * us if `event' is using such a PMC.
+ */
+ static int is_limited_pmc(int pmcnum)
+ {
+ return (ppmu->flags & PPMU_LIMITED_PMC5_6)
+ && (pmcnum == 5 || pmcnum == 6);
+ }
+
+ static void freeze_limited_counters(struct cpu_hw_events *cpuhw,
+ unsigned long pmc5, unsigned long pmc6)
+ {
+ struct perf_event *event;
+ u64 val, prev, delta;
+ int i;
+
+ for (i = 0; i < cpuhw->n_limited; ++i) {
+ event = cpuhw->limited_counter[i];
+ if (!event->hw.idx)
+ continue;
+ val = (event->hw.idx == 5) ? pmc5 : pmc6;
+ prev = local64_read(&event->hw.prev_count);
+ event->hw.idx = 0;
+ delta = check_and_compute_delta(prev, val);
+ if (delta)
+ local64_add(delta, &event->count);
+ }
+ }
+
+ static void thaw_limited_counters(struct cpu_hw_events *cpuhw,
+ unsigned long pmc5, unsigned long pmc6)
+ {
+ struct perf_event *event;
+ u64 val, prev;
+ int i;
+
+ for (i = 0; i < cpuhw->n_limited; ++i) {
+ event = cpuhw->limited_counter[i];
+ event->hw.idx = cpuhw->limited_hwidx[i];
+ val = (event->hw.idx == 5) ? pmc5 : pmc6;
+ prev = local64_read(&event->hw.prev_count);
+ if (check_and_compute_delta(prev, val))
+ local64_set(&event->hw.prev_count, val);
+ perf_event_update_userpage(event);
+ }
+ }
+
+ /*
+ * Since limited events don't respect the freeze conditions, we
+ * have to read them immediately after freezing or unfreezing the
+ * other events. We try to keep the values from the limited
+ * events as consistent as possible by keeping the delay (in
+ * cycles and instructions) between freezing/unfreezing and reading
+ * the limited events as small and consistent as possible.
+ * Therefore, if any limited events are in use, we read them
+ * both, and always in the same order, to minimize variability,
+ * and do it inside the same asm that writes MMCR0.
+ */
+ static void write_mmcr0(struct cpu_hw_events *cpuhw, unsigned long mmcr0)
+ {
+ unsigned long pmc5, pmc6;
+
+ if (!cpuhw->n_limited) {
+ mtspr(SPRN_MMCR0, mmcr0);
+ return;
+ }
+
+ /*
+ * Write MMCR0, then read PMC5 and PMC6 immediately.
+ * To ensure we don't get a performance monitor interrupt
+ * between writing MMCR0 and freezing/thawing the limited
+ * events, we first write MMCR0 with the event overflow
+ * interrupt enable bits turned off.
+ */
+ asm volatile("mtspr %3,%2; mfspr %0,%4; mfspr %1,%5"
+ : "=&r" (pmc5), "=&r" (pmc6)
+ : "r" (mmcr0 & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)),
+ "i" (SPRN_MMCR0),
+ "i" (SPRN_PMC5), "i" (SPRN_PMC6));
+
+ if (mmcr0 & MMCR0_FC)
+ freeze_limited_counters(cpuhw, pmc5, pmc6);
+ else
+ thaw_limited_counters(cpuhw, pmc5, pmc6);
+
+ /*
+ * Write the full MMCR0 including the event overflow interrupt
+ * enable bits, if necessary.
+ */
+ if (mmcr0 & (MMCR0_PMC1CE | MMCR0_PMCjCE))
+ mtspr(SPRN_MMCR0, mmcr0);
+ }
+
+ /*
+ * Disable all events to prevent PMU interrupts and to allow
+ * events to be added or removed.
+ */
+ static void power_pmu_disable(struct pmu *pmu)
+ {
+ struct cpu_hw_events *cpuhw;
+ unsigned long flags;
+
+ if (!ppmu)
+ return;
+ local_irq_save(flags);
+ cpuhw = &__get_cpu_var(cpu_hw_events);
+
+ if (!cpuhw->disabled) {
+ cpuhw->disabled = 1;
+ cpuhw->n_added = 0;
+
+ /*
+ * Check if we ever enabled the PMU on this cpu.
+ */
+ if (!cpuhw->pmcs_enabled) {
+ ppc_enable_pmcs();
+ cpuhw->pmcs_enabled = 1;
+ }
+
+ /*
+ * Disable instruction sampling if it was enabled
+ */
+ if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+ mtspr(SPRN_MMCRA,
+ cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+ mb();
+ }
+
+ /*
+ * Set the 'freeze counters' bit.
+ * The barrier is to make sure the mtspr has been
+ * executed and the PMU has frozen the events
+ * before we return.
+ */
+ write_mmcr0(cpuhw, mfspr(SPRN_MMCR0) | MMCR0_FC);
+ mb();
+ }
+ local_irq_restore(flags);
+ }
+
+ /*
+ * Re-enable all events if disable == 0.
+ * If we were previously disabled and events were added, then
+ * put the new config on the PMU.
+ */
+ static void power_pmu_enable(struct pmu *pmu)
+ {
+ struct perf_event *event;
+ struct cpu_hw_events *cpuhw;
+ unsigned long flags;
+ long i;
+ unsigned long val;
+ s64 left;
+ unsigned int hwc_index[MAX_HWEVENTS];
+ int n_lim;
+ int idx;
+
+ if (!ppmu)
+ return;
+ local_irq_save(flags);
+ cpuhw = &__get_cpu_var(cpu_hw_events);
+ if (!cpuhw->disabled) {
+ local_irq_restore(flags);
+ return;
+ }
+ cpuhw->disabled = 0;
+
+ /*
+ * If we didn't change anything, or only removed events,
+ * no need to recalculate MMCR* settings and reset the PMCs.
+ * Just reenable the PMU with the current MMCR* settings
+ * (possibly updated for removal of events).
+ */
+ if (!cpuhw->n_added) {
+ mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+ mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+ if (cpuhw->n_events == 0)
+ ppc_set_pmu_inuse(0);
+ goto out_enable;
+ }
+
+ /*
+ * Compute MMCR* values for the new set of events
+ */
+ if (ppmu->compute_mmcr(cpuhw->events, cpuhw->n_events, hwc_index,
+ cpuhw->mmcr)) {
+ /* shouldn't ever get here */
+ printk(KERN_ERR "oops compute_mmcr failed\n");
+ goto out;
+ }
+
+ /*
+ * Add in MMCR0 freeze bits corresponding to the
+ * attr.exclude_* bits for the first event.
+ * We have already checked that all events have the
+ * same values for these bits as the first event.
+ */
+ event = cpuhw->event[0];
+ if (event->attr.exclude_user)
+ cpuhw->mmcr[0] |= MMCR0_FCP;
+ if (event->attr.exclude_kernel)
+ cpuhw->mmcr[0] |= freeze_events_kernel;
+ if (event->attr.exclude_hv)
+ cpuhw->mmcr[0] |= MMCR0_FCHV;
+
+ /*
+ * Write the new configuration to MMCR* with the freeze
+ * bit set and set the hardware events to their initial values.
+ * Then unfreeze the events.
+ */
+ ppc_set_pmu_inuse(1);
+ mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
+ mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
+ mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
+ | MMCR0_FC);
+
+ /*
+ * Read off any pre-existing events that need to move
+ * to another PMC.
+ */
+ for (i = 0; i < cpuhw->n_events; ++i) {
+ event = cpuhw->event[i];
+ if (event->hw.idx && event->hw.idx != hwc_index[i] + 1) {
+ power_pmu_read(event);
+ write_pmc(event->hw.idx, 0);
+ event->hw.idx = 0;
+ }
+ }
+
+ /*
+ * Initialize the PMCs for all the new and moved events.
+ */
+ cpuhw->n_limited = n_lim = 0;
+ for (i = 0; i < cpuhw->n_events; ++i) {
+ event = cpuhw->event[i];
+ if (event->hw.idx)
+ continue;
+ idx = hwc_index[i] + 1;
+ if (is_limited_pmc(idx)) {
+ cpuhw->limited_counter[n_lim] = event;
+ cpuhw->limited_hwidx[n_lim] = idx;
+ ++n_lim;
+ continue;
+ }
+ val = 0;
+ if (event->hw.sample_period) {
+ left = local64_read(&event->hw.period_left);
+ if (left < 0x80000000L)
+ val = 0x80000000L - left;
+ }
+ local64_set(&event->hw.prev_count, val);
+ event->hw.idx = idx;
+ if (event->hw.state & PERF_HES_STOPPED)
+ val = 0;
+ write_pmc(idx, val);
+ perf_event_update_userpage(event);
+ }
+ cpuhw->n_limited = n_lim;
+ cpuhw->mmcr[0] |= MMCR0_PMXE | MMCR0_FCECE;
+
+ out_enable:
+ mb();
+ write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+ /*
+ * Enable instruction sampling if necessary
+ */
+ if (cpuhw->mmcr[2] & MMCRA_SAMPLE_ENABLE) {
+ mb();
+ mtspr(SPRN_MMCRA, cpuhw->mmcr[2]);
+ }
+
+ out:
+ local_irq_restore(flags);
+ }
+
+ static int collect_events(struct perf_event *group, int max_count,
+ struct perf_event *ctrs[], u64 *events,
+ unsigned int *flags)
+ {
+ int n = 0;
+ struct perf_event *event;
+
+ if (!is_software_event(group)) {
+ if (n >= max_count)
+ return -1;
+ ctrs[n] = group;
+ flags[n] = group->hw.event_base;
+ events[n++] = group->hw.config;
+ }
+ list_for_each_entry(event, &group->sibling_list, group_entry) {
+ if (!is_software_event(event) &&
+ event->state != PERF_EVENT_STATE_OFF) {
+ if (n >= max_count)
+ return -1;
+ ctrs[n] = event;
+ flags[n] = event->hw.event_base;
+ events[n++] = event->hw.config;
+ }
+ }
+ return n;
+ }
+
+ /*
+ * Add a event to the PMU.
+ * If all events are not already frozen, then we disable and
+ * re-enable the PMU in order to get hw_perf_enable to do the
+ * actual work of reconfiguring the PMU.
+ */
+ static int power_pmu_add(struct perf_event *event, int ef_flags)
+ {
+ struct cpu_hw_events *cpuhw;
+ unsigned long flags;
+ int n0;
+ int ret = -EAGAIN;
+
+ local_irq_save(flags);
+ perf_pmu_disable(event->pmu);
+
+ /*
+ * Add the event to the list (if there is room)
+ * and check whether the total set is still feasible.
+ */
+ cpuhw = &__get_cpu_var(cpu_hw_events);
+ n0 = cpuhw->n_events;
+ if (n0 >= ppmu->n_counter)
+ goto out;
+ cpuhw->event[n0] = event;
+ cpuhw->events[n0] = event->hw.config;
+ cpuhw->flags[n0] = event->hw.event_base;
+
+ if (!(ef_flags & PERF_EF_START))
+ event->hw.state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+ /*
+ * If group events scheduling transaction was started,
+ * skip the schedulability test here, it will be performed
+ * at commit time(->commit_txn) as a whole
+ */
+ if (cpuhw->group_flag & PERF_EVENT_TXN)
+ goto nocheck;
+
+ if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
+ goto out;
+ if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
+ goto out;
+ event->hw.config = cpuhw->events[n0];
+
+ nocheck:
+ ++cpuhw->n_events;
+ ++cpuhw->n_added;
+
+ ret = 0;
+ out:
+ perf_pmu_enable(event->pmu);
+ local_irq_restore(flags);
+ return ret;
+ }
+
+ /*
+ * Remove a event from the PMU.
+ */
+ static void power_pmu_del(struct perf_event *event, int ef_flags)
+ {
+ struct cpu_hw_events *cpuhw;
+ long i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ perf_pmu_disable(event->pmu);
+
+ power_pmu_read(event);
+
+ cpuhw = &__get_cpu_var(cpu_hw_events);
+ for (i = 0; i < cpuhw->n_events; ++i) {
+ if (event == cpuhw->event[i]) {
+ while (++i < cpuhw->n_events) {
+ cpuhw->event[i-1] = cpuhw->event[i];
+ cpuhw->events[i-1] = cpuhw->events[i];
+ cpuhw->flags[i-1] = cpuhw->flags[i];
+ }
+ --cpuhw->n_events;
+ ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
+ if (event->hw.idx) {
+ write_pmc(event->hw.idx, 0);
+ event->hw.idx = 0;
+ }
+ perf_event_update_userpage(event);
+ break;
+ }
+ }
+ for (i = 0; i < cpuhw->n_limited; ++i)
+ if (event == cpuhw->limited_counter[i])
+ break;
+ if (i < cpuhw->n_limited) {
+ while (++i < cpuhw->n_limited) {
+ cpuhw->limited_counter[i-1] = cpuhw->limited_counter[i];
+ cpuhw->limited_hwidx[i-1] = cpuhw->limited_hwidx[i];
+ }
+ --cpuhw->n_limited;
+ }
+ if (cpuhw->n_events == 0) {
+ /* disable exceptions if no events are running */
+ cpuhw->mmcr[0] &= ~(MMCR0_PMXE | MMCR0_FCECE);
+ }
+
+ perf_pmu_enable(event->pmu);
+ local_irq_restore(flags);
+ }
+
+ /*
+ * POWER-PMU does not support disabling individual counters, hence
+ * program their cycle counter to their max value and ignore the interrupts.
+ */
+
+ static void power_pmu_start(struct perf_event *event, int ef_flags)
+ {
+ unsigned long flags;
+ s64 left;
+ unsigned long val;
+
+ if (!event->hw.idx || !event->hw.sample_period)
+ return;
+
+ if (!(event->hw.state & PERF_HES_STOPPED))
+ return;
+
+ if (ef_flags & PERF_EF_RELOAD)
+ WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
+
+ local_irq_save(flags);
+ perf_pmu_disable(event->pmu);
+
+ event->hw.state = 0;
+ left = local64_read(&event->hw.period_left);
+
+ val = 0;
+ if (left < 0x80000000L)
+ val = 0x80000000L - left;
+
+ write_pmc(event->hw.idx, val);
+
+ perf_event_update_userpage(event);
+ perf_pmu_enable(event->pmu);
+ local_irq_restore(flags);
+ }
+
+ static void power_pmu_stop(struct perf_event *event, int ef_flags)
+ {
+ unsigned long flags;
+
+ if (!event->hw.idx || !event->hw.sample_period)
+ return;
+
+ if (event->hw.state & PERF_HES_STOPPED)
+ return;
+
+ local_irq_save(flags);
+ perf_pmu_disable(event->pmu);
+
+ power_pmu_read(event);
+ event->hw.state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ write_pmc(event->hw.idx, 0);
+
+ perf_event_update_userpage(event);
+ perf_pmu_enable(event->pmu);
+ local_irq_restore(flags);
+ }
+
+ /*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+ void power_pmu_start_txn(struct pmu *pmu)
+ {
+ struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+ perf_pmu_disable(pmu);
+ cpuhw->group_flag |= PERF_EVENT_TXN;
+ cpuhw->n_txn_start = cpuhw->n_events;
+ }
+
+ /*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+ void power_pmu_cancel_txn(struct pmu *pmu)
+ {
+ struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+ cpuhw->group_flag &= ~PERF_EVENT_TXN;
+ perf_pmu_enable(pmu);
+ }
+
+ /*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+ int power_pmu_commit_txn(struct pmu *pmu)
+ {
+ struct cpu_hw_events *cpuhw;
+ long i, n;
+
+ if (!ppmu)
+ return -EAGAIN;
+ cpuhw = &__get_cpu_var(cpu_hw_events);
+ n = cpuhw->n_events;
+ if (check_excludes(cpuhw->event, cpuhw->flags, 0, n))
+ return -EAGAIN;
+ i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n);
+ if (i < 0)
+ return -EAGAIN;
+
+ for (i = cpuhw->n_txn_start; i < n; ++i)
+ cpuhw->event[i]->hw.config = cpuhw->events[i];
+
+ cpuhw->group_flag &= ~PERF_EVENT_TXN;
+ perf_pmu_enable(pmu);
+ return 0;
+ }
+
+ /*
+ * Return 1 if we might be able to put event on a limited PMC,
+ * or 0 if not.
+ * A event can only go on a limited PMC if it counts something
+ * that a limited PMC can count, doesn't require interrupts, and
+ * doesn't exclude any processor mode.
+ */
+ static int can_go_on_limited_pmc(struct perf_event *event, u64 ev,
+ unsigned int flags)
+ {
+ int n;
+ u64 alt[MAX_EVENT_ALTERNATIVES];
+
+ if (event->attr.exclude_user
+ || event->attr.exclude_kernel
+ || event->attr.exclude_hv
+ || event->attr.sample_period)
+ return 0;
+
+ if (ppmu->limited_pmc_event(ev))
+ return 1;
+
+ /*
+ * The requested event_id isn't on a limited PMC already;
+ * see if any alternative code goes on a limited PMC.
+ */
+ if (!ppmu->get_alternatives)
+ return 0;
+
+ flags |= PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD;
+ n = ppmu->get_alternatives(ev, flags, alt);
+
+ return n > 0;
+ }
+
+ /*
+ * Find an alternative event_id that goes on a normal PMC, if possible,
+ * and return the event_id code, or 0 if there is no such alternative.
+ * (Note: event_id code 0 is "don't count" on all machines.)
+ */
+ static u64 normal_pmc_alternative(u64 ev, unsigned long flags)
+ {
+ u64 alt[MAX_EVENT_ALTERNATIVES];
+ int n;
+
+ flags &= ~(PPMU_LIMITED_PMC_OK | PPMU_LIMITED_PMC_REQD);
+ n = ppmu->get_alternatives(ev, flags, alt);
+ if (!n)
+ return 0;
+ return alt[0];
+ }
+
+ /* Number of perf_events counting hardware events */
+ static atomic_t num_events;
+ /* Used to avoid races in calling reserve/release_pmc_hardware */
+ static DEFINE_MUTEX(pmc_reserve_mutex);
+
+ /*
+ * Release the PMU if this is the last perf_event.
+ */
+ static void hw_perf_event_destroy(struct perf_event *event)
+ {
+ if (!atomic_add_unless(&num_events, -1, 1)) {
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_dec_return(&num_events) == 0)
+ release_pmc_hardware();
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+ }
+
+ /*
+ * Translate a generic cache event_id config to a raw event_id code.
+ */
+ static int hw_perf_cache_event(u64 config, u64 *eventp)
+ {
+ unsigned long type, op, result;
+ int ev;
+
+ if (!ppmu->cache_events)
+ return -EINVAL;
+
+ /* unpack config */
+ type = config & 0xff;
+ op = (config >> 8) & 0xff;
+ result = (config >> 16) & 0xff;
+
+ if (type >= PERF_COUNT_HW_CACHE_MAX ||
+ op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+ result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return -EINVAL;
+
+ ev = (*ppmu->cache_events)[type][op][result];
+ if (ev == 0)
+ return -EOPNOTSUPP;
+ if (ev == -1)
+ return -EINVAL;
+ *eventp = ev;
+ return 0;
+ }
+
+ static int power_pmu_event_init(struct perf_event *event)
+ {
+ u64 ev;
+ unsigned long flags;
+ struct perf_event *ctrs[MAX_HWEVENTS];
+ u64 events[MAX_HWEVENTS];
+ unsigned int cflags[MAX_HWEVENTS];
+ int n;
+ int err;
+ struct cpu_hw_events *cpuhw;
+
+ if (!ppmu)
+ return -ENOENT;
+
++ /* does not support taken branch sampling */
++ if (has_branch_stack(event))
++ return -EOPNOTSUPP;
++
+ switch (event->attr.type) {
+ case PERF_TYPE_HARDWARE:
+ ev = event->attr.config;
+ if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0)
+ return -EOPNOTSUPP;
+ ev = ppmu->generic_events[ev];
+ break;
+ case PERF_TYPE_HW_CACHE:
+ err = hw_perf_cache_event(event->attr.config, &ev);
+ if (err)
+ return err;
+ break;
+ case PERF_TYPE_RAW:
+ ev = event->attr.config;
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ event->hw.config_base = ev;
+ event->hw.idx = 0;
+
+ /*
+ * If we are not running on a hypervisor, force the
+ * exclude_hv bit to 0 so that we don't care what
+ * the user set it to.
+ */
+ if (!firmware_has_feature(FW_FEATURE_LPAR))
+ event->attr.exclude_hv = 0;
+
+ /*
+ * If this is a per-task event, then we can use
+ * PM_RUN_* events interchangeably with their non RUN_*
+ * equivalents, e.g. PM_RUN_CYC instead of PM_CYC.
+ * XXX we should check if the task is an idle task.
+ */
+ flags = 0;
+ if (event->attach_state & PERF_ATTACH_TASK)
+ flags |= PPMU_ONLY_COUNT_RUN;
+
+ /*
+ * If this machine has limited events, check whether this
+ * event_id could go on a limited event.
+ */
+ if (ppmu->flags & PPMU_LIMITED_PMC5_6) {
+ if (can_go_on_limited_pmc(event, ev, flags)) {
+ flags |= PPMU_LIMITED_PMC_OK;
+ } else if (ppmu->limited_pmc_event(ev)) {
+ /*
+ * The requested event_id is on a limited PMC,
+ * but we can't use a limited PMC; see if any
+ * alternative goes on a normal PMC.
+ */
+ ev = normal_pmc_alternative(ev, flags);
+ if (!ev)
+ return -EINVAL;
+ }
+ }
+
+ /*
+ * If this is in a group, check if it can go on with all the
+ * other hardware events in the group. We assume the event
+ * hasn't been linked into its leader's sibling list at this point.
+ */
+ n = 0;
+ if (event->group_leader != event) {
+ n = collect_events(event->group_leader, ppmu->n_counter - 1,
+ ctrs, events, cflags);
+ if (n < 0)
+ return -EINVAL;
+ }
+ events[n] = ev;
+ ctrs[n] = event;
+ cflags[n] = flags;
+ if (check_excludes(ctrs, cflags, n, 1))
+ return -EINVAL;
+
+ cpuhw = &get_cpu_var(cpu_hw_events);
+ err = power_check_constraints(cpuhw, events, cflags, n + 1);
+ put_cpu_var(cpu_hw_events);
+ if (err)
+ return -EINVAL;
+
+ event->hw.config = events[n];
+ event->hw.event_base = cflags[n];
+ event->hw.last_period = event->hw.sample_period;
+ local64_set(&event->hw.period_left, event->hw.last_period);
+
+ /*
+ * See if we need to reserve the PMU.
+ * If no events are currently in use, then we have to take a
+ * mutex to ensure that we don't race with another task doing
+ * reserve_pmc_hardware or release_pmc_hardware.
+ */
+ err = 0;
+ if (!atomic_inc_not_zero(&num_events)) {
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_read(&num_events) == 0 &&
+ reserve_pmc_hardware(perf_event_interrupt))
+ err = -EBUSY;
+ else
+ atomic_inc(&num_events);
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+ event->destroy = hw_perf_event_destroy;
+
+ return err;
+ }
+
++static int power_pmu_event_idx(struct perf_event *event)
++{
++ return event->hw.idx;
++}
++
+ struct pmu power_pmu = {
+ .pmu_enable = power_pmu_enable,
+ .pmu_disable = power_pmu_disable,
+ .event_init = power_pmu_event_init,
+ .add = power_pmu_add,
+ .del = power_pmu_del,
+ .start = power_pmu_start,
+ .stop = power_pmu_stop,
+ .read = power_pmu_read,
+ .start_txn = power_pmu_start_txn,
+ .cancel_txn = power_pmu_cancel_txn,
+ .commit_txn = power_pmu_commit_txn,
++ .event_idx = power_pmu_event_idx,
+ };
+
+ /*
+ * A counter has overflowed; update its count and record
+ * things if requested. Note that interrupts are hard-disabled
+ * here so there is no possibility of being interrupted.
+ */
+ static void record_and_restart(struct perf_event *event, unsigned long val,
+ struct pt_regs *regs)
+ {
+ u64 period = event->hw.sample_period;
+ s64 prev, delta, left;
+ int record = 0;
+
+ if (event->hw.state & PERF_HES_STOPPED) {
+ write_pmc(event->hw.idx, 0);
+ return;
+ }
+
+ /* we don't have to worry about interrupts here */
+ prev = local64_read(&event->hw.prev_count);
+ delta = check_and_compute_delta(prev, val);
+ local64_add(delta, &event->count);
+
+ /*
+ * See if the total period for this event has expired,
+ * and update for the next period.
+ */
+ val = 0;
+ left = local64_read(&event->hw.period_left) - delta;
+ if (period) {
+ if (left <= 0) {
+ left += period;
+ if (left <= 0)
+ left = period;
+ record = 1;
+ event->hw.last_period = event->hw.sample_period;
+ }
+ if (left < 0x80000000LL)
+ val = 0x80000000LL - left;
+ }
+
+ write_pmc(event->hw.idx, val);
+ local64_set(&event->hw.prev_count, val);
+ local64_set(&event->hw.period_left, left);
+ perf_event_update_userpage(event);
+
+ /*
+ * Finally record data if requested.
+ */
+ if (record) {
+ struct perf_sample_data data;
+
+ perf_sample_data_init(&data, ~0ULL);
+ data.period = event->hw.last_period;
+
+ if (event->attr.sample_type & PERF_SAMPLE_ADDR)
+ perf_get_data_addr(regs, &data.addr);
+
+ if (perf_event_overflow(event, &data, regs))
+ power_pmu_stop(event, 0);
+ }
+ }
+
+ /*
+ * Called from generic code to get the misc flags (i.e. processor mode)
+ * for an event_id.
+ */
+ unsigned long perf_misc_flags(struct pt_regs *regs)
+ {
+ u32 flags = perf_get_misc_flags(regs);
+
+ if (flags)
+ return flags;
+ return user_mode(regs) ? PERF_RECORD_MISC_USER :
+ PERF_RECORD_MISC_KERNEL;
+ }
+
+ /*
+ * Called from generic code to get the instruction pointer
+ * for an event_id.
+ */
+ unsigned long perf_instruction_pointer(struct pt_regs *regs)
+ {
+ unsigned long ip;
+
+ if (TRAP(regs) != 0xf00)
+ return regs->nip; /* not a PMU interrupt */
+
+ ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs);
+ return ip;
+ }
+
+ static bool pmc_overflow(unsigned long val)
+ {
+ if ((int)val < 0)
+ return true;
+
+ /*
+ * Events on POWER7 can roll back if a speculative event doesn't
+ * eventually complete. Unfortunately in some rare cases they will
+ * raise a performance monitor exception. We need to catch this to
+ * ensure we reset the PMC. In all cases the PMC will be 256 or less
+ * cycles from overflow.
+ *
+ * We only do this if the first pass fails to find any overflowing
+ * PMCs because a user might set a period of less than 256 and we
+ * don't want to mistakenly reset them.
+ */
+ if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256))
+ return true;
+
+ return false;
+ }
+
+ /*
+ * Performance monitor interrupt stuff
+ */
+ static void perf_event_interrupt(struct pt_regs *regs)
+ {
+ int i;
+ struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+ struct perf_event *event;
+ unsigned long val;
+ int found = 0;
+ int nmi;
+
+ if (cpuhw->n_limited)
+ freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5),
+ mfspr(SPRN_PMC6));
+
+ perf_read_regs(regs);
+
+ nmi = perf_intr_is_nmi(regs);
+ if (nmi)
+ nmi_enter();
+ else
+ irq_enter();
+
+ for (i = 0; i < cpuhw->n_events; ++i) {
+ event = cpuhw->event[i];
+ if (!event->hw.idx || is_limited_pmc(event->hw.idx))
+ continue;
+ val = read_pmc(event->hw.idx);
+ if ((int)val < 0) {
+ /* event has overflowed */
+ found = 1;
+ record_and_restart(event, val, regs);
+ }
+ }
+
+ /*
+ * In case we didn't find and reset the event that caused
+ * the interrupt, scan all events and reset any that are
+ * negative, to avoid getting continual interrupts.
+ * Any that we processed in the previous loop will not be negative.
+ */
+ if (!found) {
+ for (i = 0; i < ppmu->n_counter; ++i) {
+ if (is_limited_pmc(i + 1))
+ continue;
+ val = read_pmc(i + 1);
+ if (pmc_overflow(val))
+ write_pmc(i + 1, 0);
+ }
+ }
+
+ /*
+ * Reset MMCR0 to its normal value. This will set PMXE and
+ * clear FC (freeze counters) and PMAO (perf mon alert occurred)
+ * and thus allow interrupts to occur again.
+ * XXX might want to use MSR.PM to keep the events frozen until
+ * we get back out of this interrupt.
+ */
+ write_mmcr0(cpuhw, cpuhw->mmcr[0]);
+
+ if (nmi)
+ nmi_exit();
+ else
+ irq_exit();
+ }
+
+ static void power_pmu_setup(int cpu)
+ {
+ struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+ if (!ppmu)
+ return;
+ memset(cpuhw, 0, sizeof(*cpuhw));
+ cpuhw->mmcr[0] = MMCR0_FC;
+ }
+
+ static int __cpuinit
+ power_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+ {
+ unsigned int cpu = (long)hcpu;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_UP_PREPARE:
+ power_pmu_setup(cpu);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+ }
+
+ int __cpuinit register_power_pmu(struct power_pmu *pmu)
+ {
+ if (ppmu)
+ return -EBUSY; /* something's already registered */
+
+ ppmu = pmu;
+ pr_info("%s performance monitor hardware support registered\n",
+ pmu->name);
+
+ #ifdef MSR_HV
+ /*
+ * Use FCHV to ignore kernel events if MSR.HV is set.
+ */
+ if (mfmsr() & MSR_HV)
+ freeze_events_kernel = MMCR0_FCHV;
+ #endif /* CONFIG_PPC64 */
+
+ perf_pmu_register(&power_pmu, "cpu", PERF_TYPE_RAW);
+ perf_cpu_notifier(power_pmu_notifier);
+
+ return 0;
+ }
--- /dev/null
+ /*
+ * Interrupt handling for GE FPGA based PIC
+ *
+ * Author: Martyn Welch <martyn.welch@ge.com>
+ *
+ * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+ #include <linux/stddef.h>
+ #include <linux/kernel.h>
+ #include <linux/init.h>
+ #include <linux/irq.h>
+ #include <linux/interrupt.h>
+ #include <linux/spinlock.h>
+
+ #include <asm/byteorder.h>
+ #include <asm/io.h>
+ #include <asm/prom.h>
+ #include <asm/irq.h>
+
+ #include "ge_pic.h"
+
+ #define DEBUG
+ #undef DEBUG
+
+ #ifdef DEBUG
+ #define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
+ #else
+ #define DBG(fmt...) do { } while (0)
+ #endif
+
+ #define GEF_PIC_NUM_IRQS 32
+
+ /* Interrupt Controller Interface Registers */
+ #define GEF_PIC_INTR_STATUS 0x0000
+
+ #define GEF_PIC_INTR_MASK(cpu) (0x0010 + (0x4 * cpu))
+ #define GEF_PIC_CPU0_INTR_MASK GEF_PIC_INTR_MASK(0)
+ #define GEF_PIC_CPU1_INTR_MASK GEF_PIC_INTR_MASK(1)
+
+ #define GEF_PIC_MCP_MASK(cpu) (0x0018 + (0x4 * cpu))
+ #define GEF_PIC_CPU0_MCP_MASK GEF_PIC_MCP_MASK(0)
+ #define GEF_PIC_CPU1_MCP_MASK GEF_PIC_MCP_MASK(1)
+
+
+ static DEFINE_RAW_SPINLOCK(gef_pic_lock);
+
+ static void __iomem *gef_pic_irq_reg_base;
-static struct irq_host *gef_pic_irq_host;
++static struct irq_domain *gef_pic_irq_host;
+ static int gef_pic_cascade_irq;
+
+ /*
+ * Interrupt Controller Handling
+ *
+ * The interrupt controller handles interrupts for most on board interrupts,
+ * apart from PCI interrupts. For example on SBC610:
+ *
+ * 17:31 RO Reserved
+ * 16 RO PCI Express Doorbell 3 Status
+ * 15 RO PCI Express Doorbell 2 Status
+ * 14 RO PCI Express Doorbell 1 Status
+ * 13 RO PCI Express Doorbell 0 Status
+ * 12 RO Real Time Clock Interrupt Status
+ * 11 RO Temperature Interrupt Status
+ * 10 RO Temperature Critical Interrupt Status
+ * 9 RO Ethernet PHY1 Interrupt Status
+ * 8 RO Ethernet PHY3 Interrupt Status
+ * 7 RO PEX8548 Interrupt Status
+ * 6 RO Reserved
+ * 5 RO Watchdog 0 Interrupt Status
+ * 4 RO Watchdog 1 Interrupt Status
+ * 3 RO AXIS Message FIFO A Interrupt Status
+ * 2 RO AXIS Message FIFO B Interrupt Status
+ * 1 RO AXIS Message FIFO C Interrupt Status
+ * 0 RO AXIS Message FIFO D Interrupt Status
+ *
+ * Interrupts can be forwarded to one of two output lines. Nothing
+ * clever is done, so if the masks are incorrectly set, a single input
+ * interrupt could generate interrupts on both output lines!
+ *
+ * The dual lines are there to allow the chained interrupts to be easily
+ * passed into two different cores. We currently do not use this functionality
+ * in this driver.
+ *
+ * Controller can also be configured to generate Machine checks (MCP), again on
+ * two lines, to be attached to two different cores. It is suggested that these
+ * should be masked out.
+ */
+
+ void gef_pic_cascade(unsigned int irq, struct irq_desc *desc)
+ {
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int cascade_irq;
+
+ /*
+ * See if we actually have an interrupt, call generic handling code if
+ * we do.
+ */
+ cascade_irq = gef_pic_get_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+ }
+
+ static void gef_pic_mask(struct irq_data *d)
+ {
+ unsigned long flags;
+ unsigned int hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask &= ~(1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+ }
+
+ static void gef_pic_mask_ack(struct irq_data *d)
+ {
+ /* Don't think we actually have to do anything to ack an interrupt,
+ * we just need to clear down the devices interrupt and it will go away
+ */
+ gef_pic_mask(d);
+ }
+
+ static void gef_pic_unmask(struct irq_data *d)
+ {
+ unsigned long flags;
+ unsigned int hwirq = irqd_to_hwirq(d);
+ u32 mask;
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+ mask |= (1 << hwirq);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask);
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+ }
+
+ static struct irq_chip gef_pic_chip = {
+ .name = "gefp",
+ .irq_mask = gef_pic_mask,
+ .irq_mask_ack = gef_pic_mask_ack,
+ .irq_unmask = gef_pic_unmask,
+ };
+
+
+ /* When an interrupt is being configured, this call allows some flexibilty
+ * in deciding which irq_chip structure is used
+ */
-static int gef_pic_host_map(struct irq_host *h, unsigned int virq,
++static int gef_pic_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hwirq)
+ {
+ /* All interrupts are LEVEL sensitive */
+ irq_set_status_flags(virq, IRQ_LEVEL);
+ irq_set_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
+
+ return 0;
+ }
+
-static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct,
++static int gef_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
+ const u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+ {
+
+ *out_hwirq = intspec[0];
+ if (intsize > 1)
+ *out_flags = intspec[1];
+ else
+ *out_flags = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+ }
+
-static struct irq_host_ops gef_pic_host_ops = {
++static const struct irq_domain_ops gef_pic_host_ops = {
+ .map = gef_pic_host_map,
+ .xlate = gef_pic_host_xlate,
+ };
+
+
+ /*
+ * Initialisation of PIC, this should be called in BSP
+ */
+ void __init gef_pic_init(struct device_node *np)
+ {
+ unsigned long flags;
+
+ /* Map the devices registers into memory */
+ gef_pic_irq_reg_base = of_iomap(np, 0);
+
+ raw_spin_lock_irqsave(&gef_pic_lock, flags);
+
+ /* Initialise everything as masked. */
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_INTR_MASK, 0);
+
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0);
+ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0);
+
+ raw_spin_unlock_irqrestore(&gef_pic_lock, flags);
+
+ /* Map controller */
+ gef_pic_cascade_irq = irq_of_parse_and_map(np, 0);
+ if (gef_pic_cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "SBC610: failed to map cascade interrupt");
+ return;
+ }
+
- /* Setup an irq_host structure */
- gef_pic_irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
- GEF_PIC_NUM_IRQS,
- &gef_pic_host_ops, NO_IRQ);
++ /* Setup an irq_domain structure */
++ gef_pic_irq_host = irq_domain_add_linear(np, GEF_PIC_NUM_IRQS,
++ &gef_pic_host_ops, NULL);
+ if (gef_pic_irq_host == NULL)
+ return;
+
+ /* Chain with parent controller */
+ irq_set_chained_handler(gef_pic_cascade_irq, gef_pic_cascade);
+ }
+
+ /*
+ * This is called when we receive an interrupt with apparently comes from this
+ * chip - check, returning the highest interrupt generated or return NO_IRQ
+ */
+ unsigned int gef_pic_get_irq(void)
+ {
+ u32 cause, mask, active;
+ unsigned int virq = NO_IRQ;
+ int hwirq;
+
+ cause = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_STATUS);
+
+ mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0));
+
+ active = cause & mask;
+
+ if (active) {
+ for (hwirq = GEF_PIC_NUM_IRQS - 1; hwirq > -1; hwirq--) {
+ if (active & (0x1 << hwirq))
+ break;
+ }
+ virq = irq_linear_revmap(gef_pic_irq_host,
+ (irq_hw_number_t)hwirq);
+ }
+
+ return virq;
+ }
+
projects / linux-flexiantxendom0-3.2.10.git / commitdiff