drivers/net/wireless/rt2x00/rt2800usb.c

   1 /*
   2         Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
   3         Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
   4         Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
   5         Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   6         Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
   7         Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
   8         <http://rt2x00.serialmonkey.com>
   9
  10         This program is free software; you can redistribute it and/or modify
  11         it under the terms of the GNU General Public License as published by
  12         the Free Software Foundation; either version 2 of the License, or
  13         (at your option) any later version.
  14
  15         This program is distributed in the hope that it will be useful,
  16         but WITHOUT ANY WARRANTY; without even the implied warranty of
  17         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18         GNU General Public License for more details.
  19
  20         You should have received a copy of the GNU General Public License
  21         along with this program; if not, write to the
  22         Free Software Foundation, Inc.,
  23         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  24  */
  25
  26 /*
  27         Module: rt2800usb
  28         Abstract: rt2800usb device specific routines.
  29         Supported chipsets: RT2800U.
  30  */
  31
  32 #include <linux/delay.h>
  33 #include <linux/etherdevice.h>
  34 #include <linux/init.h>
  35 #include <linux/kernel.h>
  36 #include <linux/module.h>
  37 #include <linux/usb.h>
  38
  39 #include "rt2x00.h"
  40 #include "rt2x00usb.h"
  41 #include "rt2800lib.h"
  42 #include "rt2800.h"
  43 #include "rt2800usb.h"
  44
  45 /*
  46  * Allow hardware encryption to be disabled.
  47  */
  48 static bool modparam_nohwcrypt;
  49 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  50 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  51
  52 /*
  53  * Queue handlers.
  54  */
  55 static void rt2800usb_start_queue(struct data_queue *queue)
  56 {
  57         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  58         u32 reg;
  59
  60         switch (queue->qid) {
  61         case QID_RX:
  62                 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  63                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
  64                 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  65                 break;
  66         case QID_BEACON:
  67                 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  68                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
  69                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
  70                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
  71                 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  72                 break;
  73         default:
  74                 break;
  75         }
  76 }
  77
  78 static void rt2800usb_stop_queue(struct data_queue *queue)
  79 {
  80         struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
  81         u32 reg;
  82
  83         switch (queue->qid) {
  84         case QID_RX:
  85                 rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
  86                 rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
  87                 rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
  88                 break;
  89         case QID_BEACON:
  90                 rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
  91                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
  92                 rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
  93                 rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
  94                 rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
  95                 break;
  96         default:
  97                 break;
  98         }
  99 }
 100
 101 /*
 102  * test if there is an entry in any TX queue for which DMA is done
 103  * but the TX status has not been returned yet
 104  */
 105 static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
 106 {
 107         struct data_queue *queue;
 108
 109         tx_queue_for_each(rt2x00dev, queue) {
 110                 if (rt2x00queue_get_entry(queue, Q_INDEX_DMA_DONE) !=
 111                     rt2x00queue_get_entry(queue, Q_INDEX_DONE))
 112                         return true;
 113         }
 114         return false;
 115 }
 116
 117 static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
 118 {
 119         bool tout;
 120
 121         if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 122                 return false;
 123
 124         tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
 125         if (unlikely(tout))
 126                 WARNING(entry->queue->rt2x00dev,
 127                         "TX status timeout for entry %d in queue %d\n",
 128                         entry->entry_idx, entry->queue->qid);
 129         return tout;
 130
 131 }
 132
 133 static bool rt2800usb_txstatus_timeout(struct rt2x00_dev *rt2x00dev)
 134 {
 135         struct data_queue *queue;
 136         struct queue_entry *entry;
 137
 138         tx_queue_for_each(rt2x00dev, queue) {
 139                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 140                 if (rt2800usb_entry_txstatus_timeout(entry))
 141                         return true;
 142         }
 143         return false;
 144 }
 145
 146 static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 147                                                  int urb_status, u32 tx_status)
 148 {
 149         bool valid;
 150
 151         if (urb_status) {
 152                 WARNING(rt2x00dev, "TX status read failed %d\n", urb_status);
 153
 154                 goto stop_reading;
 155         }
 156
 157         valid = rt2x00_get_field32(tx_status, TX_STA_FIFO_VALID);
 158         if (valid) {
 159                 if (!kfifo_put(&rt2x00dev->txstatus_fifo, &tx_status))
 160                         WARNING(rt2x00dev, "TX status FIFO overrun\n");
 161
 162                 queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 163
 164                 /* Reschedule urb to read TX status again instantly */
 165                 return true;
 166         } else if (rt2800usb_txstatus_pending(rt2x00dev)) {
 167                 /* Read register after 250 us */
 168                 hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 250000),
 169                               HRTIMER_MODE_REL);
 170                 return false;
 171         }
 172
 173 stop_reading:
 174         clear_bit(TX_STATUS_READING, &rt2x00dev->flags);
 175         /*
 176          * There is small race window above, between txstatus pending check and
 177          * clear_bit someone could do rt2x00usb_interrupt_txdone, so recheck
 178          * here again if status reading is needed.
 179          */
 180         if (rt2800usb_txstatus_pending(rt2x00dev) &&
 181             test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 182                 return true;
 183         else
 184                 return false;
 185 }
 186
 187 static void rt2800usb_async_read_tx_status(struct rt2x00_dev *rt2x00dev)
 188 {
 189
 190         if (test_and_set_bit(TX_STATUS_READING, &rt2x00dev->flags))
 191                 return;
 192
 193         /* Read TX_STA_FIFO register after 500 us */
 194         hrtimer_start(&rt2x00dev->txstatus_timer, ktime_set(0, 500000),
 195                       HRTIMER_MODE_REL);
 196 }
 197
 198 static void rt2800usb_tx_dma_done(struct queue_entry *entry)
 199 {
 200         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 201
 202         rt2800usb_async_read_tx_status(rt2x00dev);
 203 }
 204
 205 static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 206 {
 207         struct rt2x00_dev *rt2x00dev =
 208             container_of(timer, struct rt2x00_dev, txstatus_timer);
 209
 210         rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
 211                                       rt2800usb_tx_sta_fifo_read_completed);
 212
 213         return HRTIMER_NORESTART;
 214 }
 215
 216 /*
 217  * Firmware functions
 218  */
 219 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 220 {
 221         return FIRMWARE_RT2870;
 222 }
 223
 224 static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 225                                     const u8 *data, const size_t len)
 226 {
 227         int status;
 228         u32 offset;
 229         u32 length;
 230
 231         /*
 232          * Check which section of the firmware we need.
 233          */
 234         if (rt2x00_rt(rt2x00dev, RT2860) ||
 235             rt2x00_rt(rt2x00dev, RT2872) ||
 236             rt2x00_rt(rt2x00dev, RT3070)) {
 237                 offset = 0;
 238                 length = 4096;
 239         } else {
 240                 offset = 4096;
 241                 length = 4096;
 242         }
 243
 244         /*
 245          * Write firmware to device.
 246          */
 247         rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
 248                                       data + offset, length);
 249
 250         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 251         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 252
 253         /*
 254          * Send firmware request to device to load firmware,
 255          * we need to specify a long timeout time.
 256          */
 257         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
 258                                              0, USB_MODE_FIRMWARE,
 259                                              REGISTER_TIMEOUT_FIRMWARE);
 260         if (status < 0) {
 261                 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
 262                 return status;
 263         }
 264
 265         msleep(10);
 266         rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 267
 268         return 0;
 269 }
 270
 271 /*
 272  * Device state switch handlers.
 273  */
 274 static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 275 {
 276         u32 reg;
 277
 278         /*
 279          * Wait until BBP and RF are ready.
 280          */
 281         if (rt2800_wait_csr_ready(rt2x00dev))
 282                 return -EBUSY;
 283
 284         rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 285         rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
 286
 287         reg = 0;
 288         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
 289         rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
 290         rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 291
 292         rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
 293
 294         rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
 295                                     USB_MODE_RESET, REGISTER_TIMEOUT);
 296
 297         rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
 298
 299         return 0;
 300 }
 301
 302 static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 303 {
 304         u32 reg;
 305
 306         if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev)))
 307                 return -EIO;
 308
 309         rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 310         rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 311         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 312         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 313         /*
 314          * Total room for RX frames in kilobytes, PBF might still exceed
 315          * this limit so reduce the number to prevent errors.
 316          */
 317         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
 318                            ((rt2x00dev->ops->rx->entry_num * DATA_FRAME_SIZE)
 319                             / 1024) - 3);
 320         rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 321         rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 322         rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
 323
 324         return rt2800_enable_radio(rt2x00dev);
 325 }
 326
 327 static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 328 {
 329         rt2800_disable_radio(rt2x00dev);
 330         rt2x00usb_disable_radio(rt2x00dev);
 331 }
 332
 333 static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 334                                enum dev_state state)
 335 {
 336         if (state == STATE_AWAKE)
 337                 rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
 338         else
 339                 rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
 340
 341         return 0;
 342 }
 343
 344 static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 345                                       enum dev_state state)
 346 {
 347         int retval = 0;
 348
 349         switch (state) {
 350         case STATE_RADIO_ON:
 351                 /*
 352                  * Before the radio can be enabled, the device first has
 353                  * to be woken up. After that it needs a bit of time
 354                  * to be fully awake and then the radio can be enabled.
 355                  */
 356                 rt2800usb_set_state(rt2x00dev, STATE_AWAKE);
 357                 msleep(1);
 358                 retval = rt2800usb_enable_radio(rt2x00dev);
 359                 break;
 360         case STATE_RADIO_OFF:
 361                 /*
 362                  * After the radio has been disabled, the device should
 363                  * be put to sleep for powersaving.
 364                  */
 365                 rt2800usb_disable_radio(rt2x00dev);
 366                 rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
 367                 break;
 368         case STATE_RADIO_IRQ_ON:
 369         case STATE_RADIO_IRQ_OFF:
 370                 /* No support, but no error either */
 371                 break;
 372         case STATE_DEEP_SLEEP:
 373         case STATE_SLEEP:
 374         case STATE_STANDBY:
 375         case STATE_AWAKE:
 376                 retval = rt2800usb_set_state(rt2x00dev, state);
 377                 break;
 378         default:
 379                 retval = -ENOTSUPP;
 380                 break;
 381         }
 382
 383         if (unlikely(retval))
 384                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
 385                       state, retval);
 386
 387         return retval;
 388 }
 389
 390 /*
 391  * Watchdog handlers
 392  */
 393 static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
 394 {
 395         unsigned int i;
 396         u32 reg;
 397
 398         rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 399         if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
 400                 WARNING(rt2x00dev, "TX HW queue 0 timed out,"
 401                         " invoke forced kick\n");
 402
 403                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40012);
 404
 405                 for (i = 0; i < 10; i++) {
 406                         udelay(10);
 407                         if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
 408                                 break;
 409                 }
 410
 411                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 412         }
 413
 414         rt2x00usb_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
 415         if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
 416                 WARNING(rt2x00dev, "TX HW queue 1 timed out,"
 417                         " invoke forced kick\n");
 418
 419                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
 420
 421                 for (i = 0; i < 10; i++) {
 422                         udelay(10);
 423                         if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
 424                                 break;
 425                 }
 426
 427                 rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
 428         }
 429
 430         rt2x00usb_watchdog(rt2x00dev);
 431 }
 432
 433 /*
 434  * TX descriptor initialization
 435  */
 436 static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
 437 {
 438         if (entry->queue->qid == QID_BEACON)
 439                 return (__le32 *) (entry->skb->data);
 440         else
 441                 return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
 442 }
 443
 444 static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 445                                     struct txentry_desc *txdesc)
 446 {
 447         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 448         __le32 *txi = (__le32 *) entry->skb->data;
 449         u32 word;
 450
 451         /*
 452          * Initialize TXINFO descriptor
 453          */
 454         rt2x00_desc_read(txi, 0, &word);
 455
 456         /*
 457          * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
 458          * TXWI + 802.11 header + L2 pad + payload + pad,
 459          * so need to decrease size of TXINFO.
 460          */
 461         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
 462                            roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE);
 463         rt2x00_set_field32(&word, TXINFO_W0_WIV,
 464                            !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 465         rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
 466         rt2x00_set_field32(&word, TXINFO_W0_SW_USE_LAST_ROUND, 0);
 467         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_NEXT_VALID, 0);
 468         rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_BURST,
 469                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
 470         rt2x00_desc_write(txi, 0, word);
 471
 472         /*
 473          * Register descriptor details in skb frame descriptor.
 474          */
 475         skbdesc->flags |= SKBDESC_DESC_IN_SKB;
 476         skbdesc->desc = txi;
 477         skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
 478 }
 479
 480 /*
 481  * TX data initialization
 482  */
 483 static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 484 {
 485         /*
 486          * pad(1~3 bytes) is needed after each 802.11 payload.
 487          * USB end pad(4 bytes) is needed at each USB bulk out packet end.
 488          * TX frame format is :
 489          * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
 490          *                 |<------------- tx_pkt_len ------------->|
 491          */
 492
 493         return roundup(entry->skb->len, 4) + 4;
 494 }
 495
 496 /*
 497  * TX control handlers
 498  */
 499 static enum txdone_entry_desc_flags
 500 rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
 501 {
 502         __le32 *txwi;
 503         u32 word;
 504         int wcid, ack, pid;
 505         int tx_wcid, tx_ack, tx_pid, is_agg;
 506
 507         /*
 508          * This frames has returned with an IO error,
 509          * so the status report is not intended for this
 510          * frame.
 511          */
 512         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 513                 return TXDONE_FAILURE;
 514
 515         wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
 516         ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
 517         pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
 518         is_agg  = rt2x00_get_field32(reg, TX_STA_FIFO_TX_AGGRE);
 519
 520         /*
 521          * Validate if this TX status report is intended for
 522          * this entry by comparing the WCID/ACK/PID fields.
 523          */
 524         txwi = rt2800usb_get_txwi(entry);
 525
 526         rt2x00_desc_read(txwi, 1, &word);
 527         tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
 528         tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
 529         tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
 530
 531         if (wcid != tx_wcid || ack != tx_ack || (!is_agg && pid != tx_pid)) {
 532                 WARNING(entry->queue->rt2x00dev,
 533                         "TX status report missed for queue %d entry %d\n",
 534                         entry->queue->qid, entry->entry_idx);
 535                 return TXDONE_UNKNOWN;
 536         }
 537
 538         return TXDONE_SUCCESS;
 539 }
 540
 541 static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
 542 {
 543         struct data_queue *queue;
 544         struct queue_entry *entry;
 545         u32 reg;
 546         u8 qid;
 547         enum txdone_entry_desc_flags done_status;
 548
 549         while (kfifo_get(&rt2x00dev->txstatus_fifo, &reg)) {
 550                 /*
 551                  * TX_STA_FIFO_PID_QUEUE is a 2-bit field, thus qid is
 552                  * guaranteed to be one of the TX QIDs .
 553                  */
 554                 qid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_QUEUE);
 555                 queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
 556
 557                 if (unlikely(rt2x00queue_empty(queue))) {
 558                         WARNING(rt2x00dev, "Got TX status for an empty "
 559                                            "queue %u, dropping\n", qid);
 560                         break;
 561                 }
 562
 563                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 564
 565                 if (unlikely(test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 566                              !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))) {
 567                         WARNING(rt2x00dev, "Data pending for entry %u "
 568                                            "in queue %u\n", entry->entry_idx, qid);
 569                         break;
 570                 }
 571
 572                 done_status = rt2800usb_txdone_entry_check(entry, reg);
 573                 if (likely(done_status == TXDONE_SUCCESS))
 574                         rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry));
 575                 else
 576                         rt2x00lib_txdone_noinfo(entry, done_status);
 577         }
 578 }
 579
 580 static void rt2800usb_txdone_nostatus(struct rt2x00_dev *rt2x00dev)
 581 {
 582         struct data_queue *queue;
 583         struct queue_entry *entry;
 584
 585         /*
 586          * Process any trailing TX status reports for IO failures,
 587          * we loop until we find the first non-IO error entry. This
 588          * can either be a frame which is free, is being uploaded,
 589          * or has completed the upload but didn't have an entry
 590          * in the TX_STAT_FIFO register yet.
 591          */
 592         tx_queue_for_each(rt2x00dev, queue) {
 593                 while (!rt2x00queue_empty(queue)) {
 594                         entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 595
 596                         if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
 597                             !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 598                                 break;
 599
 600                         if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 601                                 rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
 602                         else if (rt2800usb_entry_txstatus_timeout(entry))
 603                                 rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
 604                         else
 605                                 break;
 606                 }
 607         }
 608 }
 609
 610 static void rt2800usb_work_txdone(struct work_struct *work)
 611 {
 612         struct rt2x00_dev *rt2x00dev =
 613             container_of(work, struct rt2x00_dev, txdone_work);
 614
 615         while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo) ||
 616                rt2800usb_txstatus_timeout(rt2x00dev)) {
 617
 618                 rt2800usb_txdone(rt2x00dev);
 619
 620                 rt2800usb_txdone_nostatus(rt2x00dev);
 621
 622                 /*
 623                  * The hw may delay sending the packet after DMA complete
 624                  * if the medium is busy, thus the TX_STA_FIFO entry is
 625                  * also delayed -> use a timer to retrieve it.
 626                  */
 627                 if (rt2800usb_txstatus_pending(rt2x00dev))
 628                         rt2800usb_async_read_tx_status(rt2x00dev);
 629         }
 630 }
 631
 632 /*
 633  * RX control handlers
 634  */
 635 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 636                                   struct rxdone_entry_desc *rxdesc)
 637 {
 638         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 639         __le32 *rxi = (__le32 *)entry->skb->data;
 640         __le32 *rxd;
 641         u32 word;
 642         int rx_pkt_len;
 643
 644         /*
 645          * Copy descriptor to the skbdesc->desc buffer, making it safe from
 646          * moving of frame data in rt2x00usb.
 647          */
 648         memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 649
 650         /*
 651          * RX frame format is :
 652          * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
 653          *          |<------------ rx_pkt_len -------------->|
 654          */
 655         rt2x00_desc_read(rxi, 0, &word);
 656         rx_pkt_len = rt2x00_get_field32(word, RXINFO_W0_USB_DMA_RX_PKT_LEN);
 657
 658         /*
 659          * Remove the RXINFO structure from the sbk.
 660          */
 661         skb_pull(entry->skb, RXINFO_DESC_SIZE);
 662
 663         /*
 664          * FIXME: we need to check for rx_pkt_len validity
 665          */
 666         rxd = (__le32 *)(entry->skb->data + rx_pkt_len);
 667
 668         /*
 669          * It is now safe to read the descriptor on all architectures.
 670          */
 671         rt2x00_desc_read(rxd, 0, &word);
 672
 673         if (rt2x00_get_field32(word, RXD_W0_CRC_ERROR))
 674                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 675
 676         rxdesc->cipher_status = rt2x00_get_field32(word, RXD_W0_CIPHER_ERROR);
 677
 678         if (rt2x00_get_field32(word, RXD_W0_DECRYPTED)) {
 679                 /*
 680                  * Hardware has stripped IV/EIV data from 802.11 frame during
 681                  * decryption. Unfortunately the descriptor doesn't contain
 682                  * any fields with the EIV/IV data either, so they can't
 683                  * be restored by rt2x00lib.
 684                  */
 685                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
 686
 687                 /*
 688                  * The hardware has already checked the Michael Mic and has
 689                  * stripped it from the frame. Signal this to mac80211.
 690                  */
 691                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 692
 693                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 694                         rxdesc->flags |= RX_FLAG_DECRYPTED;
 695                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
 696                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 697         }
 698
 699         if (rt2x00_get_field32(word, RXD_W0_MY_BSS))
 700                 rxdesc->dev_flags |= RXDONE_MY_BSS;
 701
 702         if (rt2x00_get_field32(word, RXD_W0_L2PAD))
 703                 rxdesc->dev_flags |= RXDONE_L2PAD;
 704
 705         /*
 706          * Remove RXD descriptor from end of buffer.
 707          */
 708         skb_trim(entry->skb, rx_pkt_len);
 709
 710         /*
 711          * Process the RXWI structure.
 712          */
 713         rt2800_process_rxwi(entry, rxdesc);
 714 }
 715
 716 /*
 717  * Device probe functions.
 718  */
 719 static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 720 {
 721         if (rt2800_efuse_detect(rt2x00dev))
 722                 rt2800_read_eeprom_efuse(rt2x00dev);
 723         else
 724                 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
 725                                       EEPROM_SIZE);
 726
 727         return rt2800_validate_eeprom(rt2x00dev);
 728 }
 729
 730 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 731 {
 732         int retval;
 733
 734         /*
 735          * Allocate eeprom data.
 736          */
 737         retval = rt2800usb_validate_eeprom(rt2x00dev);
 738         if (retval)
 739                 return retval;
 740
 741         retval = rt2800_init_eeprom(rt2x00dev);
 742         if (retval)
 743                 return retval;
 744
 745         /*
 746          * Initialize hw specifications.
 747          */
 748         retval = rt2800_probe_hw_mode(rt2x00dev);
 749         if (retval)
 750                 return retval;
 751
 752         /*
 753          * This device has multiple filters for control frames
 754          * and has a separate filter for PS Poll frames.
 755          */
 756         __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
 757         __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
 758
 759         /*
 760          * This device requires firmware.
 761          */
 762         __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
 763         __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
 764         if (!modparam_nohwcrypt)
 765                 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
 766         __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
 767         __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
 768         __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
 769         __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
 770
 771         rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
 772
 773         /*
 774          * Set the rssi offset.
 775          */
 776         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
 777
 778         /*
 779          * Overwrite TX done handler
 780          */
 781         PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
 782
 783         return 0;
 784 }
 785
 786 static const struct ieee80211_ops rt2800usb_mac80211_ops = {
 787         .tx                     = rt2x00mac_tx,
 788         .start                  = rt2x00mac_start,
 789         .stop                   = rt2x00mac_stop,
 790         .add_interface          = rt2x00mac_add_interface,
 791         .remove_interface       = rt2x00mac_remove_interface,
 792         .config                 = rt2x00mac_config,
 793         .configure_filter       = rt2x00mac_configure_filter,
 794         .set_tim                = rt2x00mac_set_tim,
 795         .set_key                = rt2x00mac_set_key,
 796         .sw_scan_start          = rt2x00mac_sw_scan_start,
 797         .sw_scan_complete       = rt2x00mac_sw_scan_complete,
 798         .get_stats              = rt2x00mac_get_stats,
 799         .get_tkip_seq           = rt2800_get_tkip_seq,
 800         .set_rts_threshold      = rt2800_set_rts_threshold,
 801         .sta_add                = rt2x00mac_sta_add,
 802         .sta_remove             = rt2x00mac_sta_remove,
 803         .bss_info_changed       = rt2x00mac_bss_info_changed,
 804         .conf_tx                = rt2800_conf_tx,
 805         .get_tsf                = rt2800_get_tsf,
 806         .rfkill_poll            = rt2x00mac_rfkill_poll,
 807         .ampdu_action           = rt2800_ampdu_action,
 808         .flush                  = rt2x00mac_flush,
 809         .get_survey             = rt2800_get_survey,
 810         .get_ringparam          = rt2x00mac_get_ringparam,
 811         .tx_frames_pending      = rt2x00mac_tx_frames_pending,
 812 };
 813
 814 static const struct rt2800_ops rt2800usb_rt2800_ops = {
 815         .register_read          = rt2x00usb_register_read,
 816         .register_read_lock     = rt2x00usb_register_read_lock,
 817         .register_write         = rt2x00usb_register_write,
 818         .register_write_lock    = rt2x00usb_register_write_lock,
 819         .register_multiread     = rt2x00usb_register_multiread,
 820         .register_multiwrite    = rt2x00usb_register_multiwrite,
 821         .regbusy_read           = rt2x00usb_regbusy_read,
 822         .drv_write_firmware     = rt2800usb_write_firmware,
 823         .drv_init_registers     = rt2800usb_init_registers,
 824         .drv_get_txwi           = rt2800usb_get_txwi,
 825 };
 826
 827 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 828         .probe_hw               = rt2800usb_probe_hw,
 829         .get_firmware_name      = rt2800usb_get_firmware_name,
 830         .check_firmware         = rt2800_check_firmware,
 831         .load_firmware          = rt2800_load_firmware,
 832         .initialize             = rt2x00usb_initialize,
 833         .uninitialize           = rt2x00usb_uninitialize,
 834         .clear_entry            = rt2x00usb_clear_entry,
 835         .set_device_state       = rt2800usb_set_device_state,
 836         .rfkill_poll            = rt2800_rfkill_poll,
 837         .link_stats             = rt2800_link_stats,
 838         .reset_tuner            = rt2800_reset_tuner,
 839         .link_tuner             = rt2800_link_tuner,
 840         .gain_calibration       = rt2800_gain_calibration,
 841         .vco_calibration        = rt2800_vco_calibration,
 842         .watchdog               = rt2800usb_watchdog,
 843         .start_queue            = rt2800usb_start_queue,
 844         .kick_queue             = rt2x00usb_kick_queue,
 845         .stop_queue             = rt2800usb_stop_queue,
 846         .flush_queue            = rt2x00usb_flush_queue,
 847         .tx_dma_done            = rt2800usb_tx_dma_done,
 848         .write_tx_desc          = rt2800usb_write_tx_desc,
 849         .write_tx_data          = rt2800_write_tx_data,
 850         .write_beacon           = rt2800_write_beacon,
 851         .clear_beacon           = rt2800_clear_beacon,
 852         .get_tx_data_len        = rt2800usb_get_tx_data_len,
 853         .fill_rxdone            = rt2800usb_fill_rxdone,
 854         .config_shared_key      = rt2800_config_shared_key,
 855         .config_pairwise_key    = rt2800_config_pairwise_key,
 856         .config_filter          = rt2800_config_filter,
 857         .config_intf            = rt2800_config_intf,
 858         .config_erp             = rt2800_config_erp,
 859         .config_ant             = rt2800_config_ant,
 860         .config                 = rt2800_config,
 861         .sta_add                = rt2800_sta_add,
 862         .sta_remove             = rt2800_sta_remove,
 863 };
 864
 865 static const struct data_queue_desc rt2800usb_queue_rx = {
 866         .entry_num              = 128,
 867         .data_size              = AGGREGATION_SIZE,
 868         .desc_size              = RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
 869         .priv_size              = sizeof(struct queue_entry_priv_usb),
 870 };
 871
 872 static const struct data_queue_desc rt2800usb_queue_tx = {
 873         .entry_num              = 16,
 874         .data_size              = AGGREGATION_SIZE,
 875         .desc_size              = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 876         .priv_size              = sizeof(struct queue_entry_priv_usb),
 877 };
 878
 879 static const struct data_queue_desc rt2800usb_queue_bcn = {
 880         .entry_num              = 8,
 881         .data_size              = MGMT_FRAME_SIZE,
 882         .desc_size              = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 883         .priv_size              = sizeof(struct queue_entry_priv_usb),
 884 };
 885
 886 static const struct rt2x00_ops rt2800usb_ops = {
 887         .name                   = KBUILD_MODNAME,
 888         .drv_data_size          = sizeof(struct rt2800_drv_data),
 889         .max_sta_intf           = 1,
 890         .max_ap_intf            = 8,
 891         .eeprom_size            = EEPROM_SIZE,
 892         .rf_size                = RF_SIZE,
 893         .tx_queues              = NUM_TX_QUEUES,
 894         .extra_tx_headroom      = TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 895         .rx                     = &rt2800usb_queue_rx,
 896         .tx                     = &rt2800usb_queue_tx,
 897         .bcn                    = &rt2800usb_queue_bcn,
 898         .lib                    = &rt2800usb_rt2x00_ops,
 899         .drv                    = &rt2800usb_rt2800_ops,
 900         .hw                     = &rt2800usb_mac80211_ops,
 901 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 902         .debugfs                = &rt2800_rt2x00debug,
 903 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 904 };
 905
 906 /*
 907  * rt2800usb module information.
 908  */
 909 static struct usb_device_id rt2800usb_device_table[] = {
 910         /* Abocom */
 911         { USB_DEVICE(0x07b8, 0x2870) },
 912         { USB_DEVICE(0x07b8, 0x2770) },
 913         { USB_DEVICE(0x07b8, 0x3070) },
 914         { USB_DEVICE(0x07b8, 0x3071) },
 915         { USB_DEVICE(0x07b8, 0x3072) },
 916         { USB_DEVICE(0x1482, 0x3c09) },
 917         /* AirTies */
 918         { USB_DEVICE(0x1eda, 0x2012) },
 919         { USB_DEVICE(0x1eda, 0x2310) },
 920         /* Allwin */
 921         { USB_DEVICE(0x8516, 0x2070) },
 922         { USB_DEVICE(0x8516, 0x2770) },
 923         { USB_DEVICE(0x8516, 0x2870) },
 924         { USB_DEVICE(0x8516, 0x3070) },
 925         { USB_DEVICE(0x8516, 0x3071) },
 926         { USB_DEVICE(0x8516, 0x3072) },
 927         /* Alpha Networks */
 928         { USB_DEVICE(0x14b2, 0x3c06) },
 929         { USB_DEVICE(0x14b2, 0x3c07) },
 930         { USB_DEVICE(0x14b2, 0x3c09) },
 931         { USB_DEVICE(0x14b2, 0x3c12) },
 932         { USB_DEVICE(0x14b2, 0x3c23) },
 933         { USB_DEVICE(0x14b2, 0x3c25) },
 934         { USB_DEVICE(0x14b2, 0x3c27) },
 935         { USB_DEVICE(0x14b2, 0x3c28) },
 936         { USB_DEVICE(0x14b2, 0x3c2c) },
 937         /* Amit */
 938         { USB_DEVICE(0x15c5, 0x0008) },
 939         /* Askey */
 940         { USB_DEVICE(0x1690, 0x0740) },
 941         /* ASUS */
 942         { USB_DEVICE(0x0b05, 0x1731) },
 943         { USB_DEVICE(0x0b05, 0x1732) },
 944         { USB_DEVICE(0x0b05, 0x1742) },
 945         { USB_DEVICE(0x0b05, 0x1784) },
 946         { USB_DEVICE(0x1761, 0x0b05) },
 947         /* AzureWave */
 948         { USB_DEVICE(0x13d3, 0x3247) },
 949         { USB_DEVICE(0x13d3, 0x3273) },
 950         { USB_DEVICE(0x13d3, 0x3305) },
 951         { USB_DEVICE(0x13d3, 0x3307) },
 952         { USB_DEVICE(0x13d3, 0x3321) },
 953         /* Belkin */
 954         { USB_DEVICE(0x050d, 0x8053) },
 955         { USB_DEVICE(0x050d, 0x805c) },
 956         { USB_DEVICE(0x050d, 0x815c) },
 957         { USB_DEVICE(0x050d, 0x825a) },
 958         { USB_DEVICE(0x050d, 0x825b) },
 959         { USB_DEVICE(0x050d, 0x935a) },
 960         { USB_DEVICE(0x050d, 0x935b) },
 961         /* Buffalo */
 962         { USB_DEVICE(0x0411, 0x00e8) },
 963         { USB_DEVICE(0x0411, 0x0158) },
 964         { USB_DEVICE(0x0411, 0x015d) },
 965         { USB_DEVICE(0x0411, 0x016f) },
 966         { USB_DEVICE(0x0411, 0x01a2) },
 967         /* Corega */
 968         { USB_DEVICE(0x07aa, 0x002f) },
 969         { USB_DEVICE(0x07aa, 0x003c) },
 970         { USB_DEVICE(0x07aa, 0x003f) },
 971         { USB_DEVICE(0x18c5, 0x0012) },
 972         /* D-Link */
 973         { USB_DEVICE(0x07d1, 0x3c09) },
 974         { USB_DEVICE(0x07d1, 0x3c0a) },
 975         { USB_DEVICE(0x07d1, 0x3c0d) },
 976         { USB_DEVICE(0x07d1, 0x3c0e) },
 977         { USB_DEVICE(0x07d1, 0x3c0f) },
 978         { USB_DEVICE(0x07d1, 0x3c11) },
 979         { USB_DEVICE(0x07d1, 0x3c13) },
 980         { USB_DEVICE(0x07d1, 0x3c15) },
 981         { USB_DEVICE(0x07d1, 0x3c16) },
 982         { USB_DEVICE(0x2001, 0x3c1b) },
 983         /* Draytek */
 984         { USB_DEVICE(0x07fa, 0x7712) },
 985         /* DVICO */
 986         { USB_DEVICE(0x0fe9, 0xb307) },
 987         /* Edimax */
 988         { USB_DEVICE(0x7392, 0x7711) },
 989         { USB_DEVICE(0x7392, 0x7717) },
 990         { USB_DEVICE(0x7392, 0x7718) },
 991         { USB_DEVICE(0x7392, 0x7722) },
 992         /* Encore */
 993         { USB_DEVICE(0x203d, 0x1480) },
 994         { USB_DEVICE(0x203d, 0x14a9) },
 995         /* EnGenius */
 996         { USB_DEVICE(0x1740, 0x9701) },
 997         { USB_DEVICE(0x1740, 0x9702) },
 998         { USB_DEVICE(0x1740, 0x9703) },
 999         { USB_DEVICE(0x1740, 0x9705) },
1000         { USB_DEVICE(0x1740, 0x9706) },
1001         { USB_DEVICE(0x1740, 0x9707) },
1002         { USB_DEVICE(0x1740, 0x9708) },
1003         { USB_DEVICE(0x1740, 0x9709) },
1004         /* Gemtek */
1005         { USB_DEVICE(0x15a9, 0x0012) },
1006         /* Gigabyte */
1007         { USB_DEVICE(0x1044, 0x800b) },
1008         { USB_DEVICE(0x1044, 0x800d) },
1009         /* Hawking */
1010         { USB_DEVICE(0x0e66, 0x0001) },
1011         { USB_DEVICE(0x0e66, 0x0003) },
1012         { USB_DEVICE(0x0e66, 0x0009) },
1013         { USB_DEVICE(0x0e66, 0x000b) },
1014         { USB_DEVICE(0x0e66, 0x0013) },
1015         { USB_DEVICE(0x0e66, 0x0017) },
1016         { USB_DEVICE(0x0e66, 0x0018) },
1017         /* I-O DATA */
1018         { USB_DEVICE(0x04bb, 0x0945) },
1019         { USB_DEVICE(0x04bb, 0x0947) },
1020         { USB_DEVICE(0x04bb, 0x0948) },
1021         /* Linksys */
1022         { USB_DEVICE(0x13b1, 0x0031) },
1023         { USB_DEVICE(0x1737, 0x0070) },
1024         { USB_DEVICE(0x1737, 0x0071) },
1025         { USB_DEVICE(0x1737, 0x0077) },
1026         { USB_DEVICE(0x1737, 0x0078) },
1027         /* Logitec */
1028         { USB_DEVICE(0x0789, 0x0162) },
1029         { USB_DEVICE(0x0789, 0x0163) },
1030         { USB_DEVICE(0x0789, 0x0164) },
1031         { USB_DEVICE(0x0789, 0x0166) },
1032         /* Motorola */
1033         { USB_DEVICE(0x100d, 0x9031) },
1034         /* MSI */
1035         { USB_DEVICE(0x0db0, 0x3820) },
1036         { USB_DEVICE(0x0db0, 0x3821) },
1037         { USB_DEVICE(0x0db0, 0x3822) },
1038         { USB_DEVICE(0x0db0, 0x3870) },
1039         { USB_DEVICE(0x0db0, 0x3871) },
1040         { USB_DEVICE(0x0db0, 0x6899) },
1041         { USB_DEVICE(0x0db0, 0x821a) },
1042         { USB_DEVICE(0x0db0, 0x822a) },
1043         { USB_DEVICE(0x0db0, 0x822b) },
1044         { USB_DEVICE(0x0db0, 0x822c) },
1045         { USB_DEVICE(0x0db0, 0x870a) },
1046         { USB_DEVICE(0x0db0, 0x871a) },
1047         { USB_DEVICE(0x0db0, 0x871b) },
1048         { USB_DEVICE(0x0db0, 0x871c) },
1049         { USB_DEVICE(0x0db0, 0x899a) },
1050         /* Ovislink */
1051         { USB_DEVICE(0x1b75, 0x3071) },
1052         { USB_DEVICE(0x1b75, 0x3072) },
1053         /* Para */
1054         { USB_DEVICE(0x20b8, 0x8888) },
1055         /* Pegatron */
1056         { USB_DEVICE(0x1d4d, 0x0002) },
1057         { USB_DEVICE(0x1d4d, 0x000c) },
1058         { USB_DEVICE(0x1d4d, 0x000e) },
1059         { USB_DEVICE(0x1d4d, 0x0011) },
1060         /* Philips */
1061         { USB_DEVICE(0x0471, 0x200f) },
1062         /* Planex */
1063         { USB_DEVICE(0x2019, 0xab25) },
1064         { USB_DEVICE(0x2019, 0xed06) },
1065         /* Quanta */
1066         { USB_DEVICE(0x1a32, 0x0304) },
1067         /* Ralink */
1068         { USB_DEVICE(0x148f, 0x2070) },
1069         { USB_DEVICE(0x148f, 0x2770) },
1070         { USB_DEVICE(0x148f, 0x2870) },
1071         { USB_DEVICE(0x148f, 0x3070) },
1072         { USB_DEVICE(0x148f, 0x3071) },
1073         { USB_DEVICE(0x148f, 0x3072) },
1074         /* Samsung */
1075         { USB_DEVICE(0x04e8, 0x2018) },
1076         /* Siemens */
1077         { USB_DEVICE(0x129b, 0x1828) },
1078         /* Sitecom */
1079         { USB_DEVICE(0x0df6, 0x0017) },
1080         { USB_DEVICE(0x0df6, 0x002b) },
1081         { USB_DEVICE(0x0df6, 0x002c) },
1082         { USB_DEVICE(0x0df6, 0x002d) },
1083         { USB_DEVICE(0x0df6, 0x0039) },
1084         { USB_DEVICE(0x0df6, 0x003b) },
1085         { USB_DEVICE(0x0df6, 0x003d) },
1086         { USB_DEVICE(0x0df6, 0x003e) },
1087         { USB_DEVICE(0x0df6, 0x003f) },
1088         { USB_DEVICE(0x0df6, 0x0040) },
1089         { USB_DEVICE(0x0df6, 0x0042) },
1090         { USB_DEVICE(0x0df6, 0x0047) },
1091         { USB_DEVICE(0x0df6, 0x0048) },
1092         { USB_DEVICE(0x0df6, 0x0051) },
1093         { USB_DEVICE(0x0df6, 0x005f) },
1094         { USB_DEVICE(0x0df6, 0x0060) },
1095         /* SMC */
1096         { USB_DEVICE(0x083a, 0x6618) },
1097         { USB_DEVICE(0x083a, 0x7511) },
1098         { USB_DEVICE(0x083a, 0x7512) },
1099         { USB_DEVICE(0x083a, 0x7522) },
1100         { USB_DEVICE(0x083a, 0x8522) },
1101         { USB_DEVICE(0x083a, 0xa618) },
1102         { USB_DEVICE(0x083a, 0xa701) },
1103         { USB_DEVICE(0x083a, 0xa702) },
1104         { USB_DEVICE(0x083a, 0xa703) },
1105         { USB_DEVICE(0x083a, 0xb522) },
1106         /* Sparklan */
1107         { USB_DEVICE(0x15a9, 0x0006) },
1108         /* Sweex */
1109         { USB_DEVICE(0x177f, 0x0153) },
1110         { USB_DEVICE(0x177f, 0x0302) },
1111         { USB_DEVICE(0x177f, 0x0313) },
1112         /* U-Media */
1113         { USB_DEVICE(0x157e, 0x300e) },
1114         { USB_DEVICE(0x157e, 0x3013) },
1115         /* ZCOM */
1116         { USB_DEVICE(0x0cde, 0x0022) },
1117         { USB_DEVICE(0x0cde, 0x0025) },
1118         /* Zinwell */
1119         { USB_DEVICE(0x5a57, 0x0280) },
1120         { USB_DEVICE(0x5a57, 0x0282) },
1121         { USB_DEVICE(0x5a57, 0x0283) },
1122         { USB_DEVICE(0x5a57, 0x5257) },
1123         /* Zyxel */
1124         { USB_DEVICE(0x0586, 0x3416) },
1125         { USB_DEVICE(0x0586, 0x3418) },
1126         { USB_DEVICE(0x0586, 0x341e) },
1127         { USB_DEVICE(0x0586, 0x343e) },
1128 #ifdef CONFIG_RT2800USB_RT33XX
1129         /* Belkin */
1130         { USB_DEVICE(0x050d, 0x945b) },
1131         /* Ralink */
1132         { USB_DEVICE(0x148f, 0x3370) },
1133         { USB_DEVICE(0x148f, 0x8070) },
1134         /* Sitecom */
1135         { USB_DEVICE(0x0df6, 0x0050) },
1136 #endif
1137 #ifdef CONFIG_RT2800USB_RT35XX
1138         /* Allwin */
1139         { USB_DEVICE(0x8516, 0x3572) },
1140         /* Askey */
1141         { USB_DEVICE(0x1690, 0x0744) },
1142         /* Cisco */
1143         { USB_DEVICE(0x167b, 0x4001) },
1144         /* EnGenius */
1145         { USB_DEVICE(0x1740, 0x9801) },
1146         /* I-O DATA */
1147         { USB_DEVICE(0x04bb, 0x0944) },
1148         /* Linksys */
1149         { USB_DEVICE(0x13b1, 0x002f) },
1150         { USB_DEVICE(0x1737, 0x0079) },
1151         /* Ralink */
1152         { USB_DEVICE(0x148f, 0x3572) },
1153         /* Sitecom */
1154         { USB_DEVICE(0x0df6, 0x0041) },
1155         { USB_DEVICE(0x0df6, 0x0062) },
1156         /* Toshiba */
1157         { USB_DEVICE(0x0930, 0x0a07) },
1158         /* Zinwell */
1159         { USB_DEVICE(0x5a57, 0x0284) },
1160 #endif
1161 #ifdef CONFIG_RT2800USB_RT53XX
1162         /* Alpha */
1163         { USB_DEVICE(0x2001, 0x3c15) },
1164         { USB_DEVICE(0x2001, 0x3c19) },
1165         /* Arcadyan */
1166         { USB_DEVICE(0x043e, 0x7a12) },
1167         /* Azurewave */
1168         { USB_DEVICE(0x13d3, 0x3329) },
1169         { USB_DEVICE(0x13d3, 0x3365) },
1170         /* LG innotek */
1171         { USB_DEVICE(0x043e, 0x7a22) },
1172         /* Panasonic */
1173         { USB_DEVICE(0x04da, 0x1801) },
1174         { USB_DEVICE(0x04da, 0x1800) },
1175         /* Philips */
1176         { USB_DEVICE(0x0471, 0x2104) },
1177         /* Ralink */
1178         { USB_DEVICE(0x148f, 0x5370) },
1179         { USB_DEVICE(0x148f, 0x5372) },
1180         /* Unknown */
1181         { USB_DEVICE(0x04da, 0x23f6) },
1182 #endif
1183 #ifdef CONFIG_RT2800USB_UNKNOWN
1184         /*
1185          * Unclear what kind of devices these are (they aren't supported by the
1186          * vendor linux driver).
1187          */
1188         /* Abocom */
1189         { USB_DEVICE(0x07b8, 0x3073) },
1190         { USB_DEVICE(0x07b8, 0x3074) },
1191         /* Alpha Networks */
1192         { USB_DEVICE(0x14b2, 0x3c08) },
1193         { USB_DEVICE(0x14b2, 0x3c11) },
1194         /* Amigo */
1195         { USB_DEVICE(0x0e0b, 0x9031) },
1196         { USB_DEVICE(0x0e0b, 0x9041) },
1197         /* ASUS */
1198         { USB_DEVICE(0x0b05, 0x166a) },
1199         { USB_DEVICE(0x0b05, 0x1760) },
1200         { USB_DEVICE(0x0b05, 0x1761) },
1201         { USB_DEVICE(0x0b05, 0x1790) },
1202         { USB_DEVICE(0x0b05, 0x179d) },
1203         /* AzureWave */
1204         { USB_DEVICE(0x13d3, 0x3262) },
1205         { USB_DEVICE(0x13d3, 0x3284) },
1206         { USB_DEVICE(0x13d3, 0x3322) },
1207         /* Belkin */
1208         { USB_DEVICE(0x050d, 0x1003) },
1209         /* Buffalo */
1210         { USB_DEVICE(0x0411, 0x012e) },
1211         { USB_DEVICE(0x0411, 0x0148) },
1212         { USB_DEVICE(0x0411, 0x0150) },
1213         /* Corega */
1214         { USB_DEVICE(0x07aa, 0x0041) },
1215         { USB_DEVICE(0x07aa, 0x0042) },
1216         { USB_DEVICE(0x18c5, 0x0008) },
1217         /* D-Link */
1218         { USB_DEVICE(0x07d1, 0x3c0b) },
1219         { USB_DEVICE(0x07d1, 0x3c17) },
1220         { USB_DEVICE(0x2001, 0x3c17) },
1221         /* Edimax */
1222         { USB_DEVICE(0x7392, 0x4085) },
1223         /* Encore */
1224         { USB_DEVICE(0x203d, 0x14a1) },
1225         /* Fujitsu Stylistic 550 */
1226         { USB_DEVICE(0x1690, 0x0761) },
1227         /* Gemtek */
1228         { USB_DEVICE(0x15a9, 0x0010) },
1229         /* Gigabyte */
1230         { USB_DEVICE(0x1044, 0x800c) },
1231         /* Huawei */
1232         { USB_DEVICE(0x148f, 0xf101) },
1233         /* I-O DATA */
1234         { USB_DEVICE(0x04bb, 0x094b) },
1235         /* LevelOne */
1236         { USB_DEVICE(0x1740, 0x0605) },
1237         { USB_DEVICE(0x1740, 0x0615) },
1238         /* Logitec */
1239         { USB_DEVICE(0x0789, 0x0168) },
1240         { USB_DEVICE(0x0789, 0x0169) },
1241         /* Motorola */
1242         { USB_DEVICE(0x100d, 0x9032) },
1243         /* Pegatron */
1244         { USB_DEVICE(0x05a6, 0x0101) },
1245         { USB_DEVICE(0x1d4d, 0x0010) },
1246         /* Planex */
1247         { USB_DEVICE(0x2019, 0x5201) },
1248         { USB_DEVICE(0x2019, 0xab24) },
1249         /* Qcom */
1250         { USB_DEVICE(0x18e8, 0x6259) },
1251         /* RadioShack */
1252         { USB_DEVICE(0x08b9, 0x1197) },
1253         /* Sitecom */
1254         { USB_DEVICE(0x0df6, 0x003c) },
1255         { USB_DEVICE(0x0df6, 0x004a) },
1256         { USB_DEVICE(0x0df6, 0x004d) },
1257         { USB_DEVICE(0x0df6, 0x0053) },
1258         /* SMC */
1259         { USB_DEVICE(0x083a, 0xa512) },
1260         { USB_DEVICE(0x083a, 0xc522) },
1261         { USB_DEVICE(0x083a, 0xd522) },
1262         { USB_DEVICE(0x083a, 0xf511) },
1263         /* Zyxel */
1264         { USB_DEVICE(0x0586, 0x341a) },
1265 #endif
1266         { 0, }
1267 };
1268
1269 MODULE_AUTHOR(DRV_PROJECT);
1270 MODULE_VERSION(DRV_VERSION);
1271 MODULE_DESCRIPTION("Ralink RT2800 USB Wireless LAN driver.");
1272 MODULE_SUPPORTED_DEVICE("Ralink RT2870 USB chipset based cards");
1273 MODULE_DEVICE_TABLE(usb, rt2800usb_device_table);
1274 MODULE_FIRMWARE(FIRMWARE_RT2870);
1275 MODULE_LICENSE("GPL");
1276
1277 static int rt2800usb_probe(struct usb_interface *usb_intf,
1278                            const struct usb_device_id *id)
1279 {
1280         return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
1281 }
1282
1283 static struct usb_driver rt2800usb_driver = {
1284         .name           = KBUILD_MODNAME,
1285         .id_table       = rt2800usb_device_table,
1286         .probe          = rt2800usb_probe,
1287         .disconnect     = rt2x00usb_disconnect,
1288         .suspend        = rt2x00usb_suspend,
1289         .resume         = rt2x00usb_resume,
1290 };
1291
1292 module_usb_driver(rt2800usb_driver);