md/raid10: fix transcription error in calc_sectors conversion.
[linux-flexiantxendom0-3.2.10.git] / drivers / net / wireless / ath / ath9k / ar9003_phy.c
1 /*
2  * Copyright (c) 2010-2011 Atheros Communications Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #include <linux/export.h>
18 #include "hw.h"
19 #include "ar9003_phy.h"
20
21 static const int firstep_table[] =
22 /* level:  0   1   2   3   4   5   6   7   8  */
23         { -4, -2,  0,  2,  4,  6,  8, 10, 12 }; /* lvl 0-8, default 2 */
24
25 static const int cycpwrThr1_table[] =
26 /* level:  0   1   2   3   4   5   6   7   8  */
27         { -6, -4, -2,  0,  2,  4,  6,  8 };     /* lvl 0-7, default 3 */
28
29 /*
30  * register values to turn OFDM weak signal detection OFF
31  */
32 static const int m1ThreshLow_off = 127;
33 static const int m2ThreshLow_off = 127;
34 static const int m1Thresh_off = 127;
35 static const int m2Thresh_off = 127;
36 static const int m2CountThr_off =  31;
37 static const int m2CountThrLow_off =  63;
38 static const int m1ThreshLowExt_off = 127;
39 static const int m2ThreshLowExt_off = 127;
40 static const int m1ThreshExt_off = 127;
41 static const int m2ThreshExt_off = 127;
42
43 /**
44  * ar9003_hw_set_channel - set channel on single-chip device
45  * @ah: atheros hardware structure
46  * @chan:
47  *
48  * This is the function to change channel on single-chip devices, that is
49  * for AR9300 family of chipsets.
50  *
51  * This function takes the channel value in MHz and sets
52  * hardware channel value. Assumes writes have been enabled to analog bus.
53  *
54  * Actual Expression,
55  *
56  * For 2GHz channel,
57  * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
58  * (freq_ref = 40MHz)
59  *
60  * For 5GHz channel,
61  * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
62  * (freq_ref = 40MHz/(24>>amodeRefSel))
63  *
64  * For 5GHz channels which are 5MHz spaced,
65  * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
66  * (freq_ref = 40MHz)
67  */
68 static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
69 {
70         u16 bMode, fracMode = 0, aModeRefSel = 0;
71         u32 freq, channelSel = 0, reg32 = 0;
72         struct chan_centers centers;
73         int loadSynthChannel;
74
75         ath9k_hw_get_channel_centers(ah, chan, &centers);
76         freq = centers.synth_center;
77
78         if (freq < 4800) {     /* 2 GHz, fractional mode */
79                 if (AR_SREV_9330(ah)) {
80                         u32 chan_frac;
81                         u32 div;
82
83                         if (ah->is_clk_25mhz)
84                                 div = 75;
85                         else
86                                 div = 120;
87
88                         channelSel = (freq * 4) / div;
89                         chan_frac = (((freq * 4) % div) * 0x20000) / div;
90                         channelSel = (channelSel << 17) | chan_frac;
91                 } else if (AR_SREV_9485(ah)) {
92                         u32 chan_frac;
93
94                         /*
95                          * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0
96                          * ndiv = ((chan_mhz * 4) / 3) / freq_ref;
97                          * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000
98                          */
99                         channelSel = (freq * 4) / 120;
100                         chan_frac = (((freq * 4) % 120) * 0x20000) / 120;
101                         channelSel = (channelSel << 17) | chan_frac;
102                 } else if (AR_SREV_9340(ah)) {
103                         if (ah->is_clk_25mhz) {
104                                 u32 chan_frac;
105
106                                 channelSel = (freq * 2) / 75;
107                                 chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
108                                 channelSel = (channelSel << 17) | chan_frac;
109                         } else
110                                 channelSel = CHANSEL_2G(freq) >> 1;
111                 } else
112                         channelSel = CHANSEL_2G(freq);
113                 /* Set to 2G mode */
114                 bMode = 1;
115         } else {
116                 if (AR_SREV_9340(ah) && ah->is_clk_25mhz) {
117                         u32 chan_frac;
118
119                         channelSel = (freq * 2) / 75;
120                         chan_frac = (((freq * 2) % 75) * 0x20000) / 75;
121                         channelSel = (channelSel << 17) | chan_frac;
122                 } else {
123                         channelSel = CHANSEL_5G(freq);
124                         /* Doubler is ON, so, divide channelSel by 2. */
125                         channelSel >>= 1;
126                 }
127                 /* Set to 5G mode */
128                 bMode = 0;
129         }
130
131         /* Enable fractional mode for all channels */
132         fracMode = 1;
133         aModeRefSel = 0;
134         loadSynthChannel = 0;
135
136         reg32 = (bMode << 29);
137         REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
138
139         /* Enable Long shift Select for Synthesizer */
140         REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_SYNTH4,
141                       AR_PHY_SYNTH4_LONG_SHIFT_SELECT, 1);
142
143         /* Program Synth. setting */
144         reg32 = (channelSel << 2) | (fracMode << 30) |
145                 (aModeRefSel << 28) | (loadSynthChannel << 31);
146         REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
147
148         /* Toggle Load Synth channel bit */
149         loadSynthChannel = 1;
150         reg32 = (channelSel << 2) | (fracMode << 30) |
151                 (aModeRefSel << 28) | (loadSynthChannel << 31);
152         REG_WRITE(ah, AR_PHY_65NM_CH0_SYNTH7, reg32);
153
154         ah->curchan = chan;
155         ah->curchan_rad_index = -1;
156
157         return 0;
158 }
159
160 /**
161  * ar9003_hw_spur_mitigate_mrc_cck - convert baseband spur frequency
162  * @ah: atheros hardware structure
163  * @chan:
164  *
165  * For single-chip solutions. Converts to baseband spur frequency given the
166  * input channel frequency and compute register settings below.
167  *
168  * Spur mitigation for MRC CCK
169  */
170 static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
171                                             struct ath9k_channel *chan)
172 {
173         static const u32 spur_freq[4] = { 2420, 2440, 2464, 2480 };
174         int cur_bb_spur, negative = 0, cck_spur_freq;
175         int i;
176         int range, max_spur_cnts, synth_freq;
177         u8 *spur_fbin_ptr = NULL;
178
179         /*
180          * Need to verify range +/- 10 MHz in control channel, otherwise spur
181          * is out-of-band and can be ignored.
182          */
183
184         if (AR_SREV_9485(ah) || AR_SREV_9340(ah) || AR_SREV_9330(ah)) {
185                 spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah,
186                                                          IS_CHAN_2GHZ(chan));
187                 if (spur_fbin_ptr[0] == 0) /* No spur */
188                         return;
189                 max_spur_cnts = 5;
190                 if (IS_CHAN_HT40(chan)) {
191                         range = 19;
192                         if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
193                                            AR_PHY_GC_DYN2040_PRI_CH) == 0)
194                                 synth_freq = chan->channel + 10;
195                         else
196                                 synth_freq = chan->channel - 10;
197                 } else {
198                         range = 10;
199                         synth_freq = chan->channel;
200                 }
201         } else {
202                 range = AR_SREV_9462(ah) ? 5 : 10;
203                 max_spur_cnts = 4;
204                 synth_freq = chan->channel;
205         }
206
207         for (i = 0; i < max_spur_cnts; i++) {
208                 if (AR_SREV_9462(ah) && (i == 0 || i == 3))
209                         continue;
210                 negative = 0;
211                 if (AR_SREV_9485(ah) || AR_SREV_9340(ah) || AR_SREV_9330(ah))
212                         cur_bb_spur = FBIN2FREQ(spur_fbin_ptr[i],
213                                         IS_CHAN_2GHZ(chan)) - synth_freq;
214                 else
215                         cur_bb_spur = spur_freq[i] - synth_freq;
216
217                 if (cur_bb_spur < 0) {
218                         negative = 1;
219                         cur_bb_spur = -cur_bb_spur;
220                 }
221                 if (cur_bb_spur < range) {
222                         cck_spur_freq = (int)((cur_bb_spur << 19) / 11);
223
224                         if (negative == 1)
225                                 cck_spur_freq = -cck_spur_freq;
226
227                         cck_spur_freq = cck_spur_freq & 0xfffff;
228
229                         REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
230                                       AR_PHY_AGC_CONTROL_YCOK_MAX, 0x7);
231                         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
232                                       AR_PHY_CCK_SPUR_MIT_SPUR_RSSI_THR, 0x7f);
233                         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
234                                       AR_PHY_CCK_SPUR_MIT_SPUR_FILTER_TYPE,
235                                       0x2);
236                         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
237                                       AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT,
238                                       0x1);
239                         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
240                                       AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ,
241                                       cck_spur_freq);
242
243                         return;
244                 }
245         }
246
247         REG_RMW_FIELD(ah, AR_PHY_AGC_CONTROL,
248                       AR_PHY_AGC_CONTROL_YCOK_MAX, 0x5);
249         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
250                       AR_PHY_CCK_SPUR_MIT_USE_CCK_SPUR_MIT, 0x0);
251         REG_RMW_FIELD(ah, AR_PHY_CCK_SPUR_MIT,
252                       AR_PHY_CCK_SPUR_MIT_CCK_SPUR_FREQ, 0x0);
253 }
254
255 /* Clean all spur register fields */
256 static void ar9003_hw_spur_ofdm_clear(struct ath_hw *ah)
257 {
258         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
259                       AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0);
260         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
261                       AR_PHY_TIMING11_SPUR_FREQ_SD, 0);
262         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
263                       AR_PHY_TIMING11_SPUR_DELTA_PHASE, 0);
264         REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
265                       AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, 0);
266         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
267                       AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0);
268         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
269                       AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0);
270         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
271                       AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0);
272         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
273                       AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 0);
274         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
275                       AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 0);
276
277         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
278                       AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0);
279         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
280                       AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0);
281         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
282                       AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0);
283         REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
284                       AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, 0);
285         REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
286                       AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, 0);
287         REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
288                       AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, 0);
289         REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
290                       AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0);
291         REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
292                       AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0);
293         REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
294                       AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0);
295         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
296                       AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0);
297 }
298
299 static void ar9003_hw_spur_ofdm(struct ath_hw *ah,
300                                 int freq_offset,
301                                 int spur_freq_sd,
302                                 int spur_delta_phase,
303                                 int spur_subchannel_sd)
304 {
305         int mask_index = 0;
306
307         /* OFDM Spur mitigation */
308         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
309                  AR_PHY_TIMING4_ENABLE_SPUR_FILTER, 0x1);
310         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
311                       AR_PHY_TIMING11_SPUR_FREQ_SD, spur_freq_sd);
312         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
313                       AR_PHY_TIMING11_SPUR_DELTA_PHASE, spur_delta_phase);
314         REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
315                       AR_PHY_SFCORR_EXT_SPUR_SUBCHANNEL_SD, spur_subchannel_sd);
316         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
317                       AR_PHY_TIMING11_USE_SPUR_FILTER_IN_AGC, 0x1);
318         REG_RMW_FIELD(ah, AR_PHY_TIMING11,
319                       AR_PHY_TIMING11_USE_SPUR_FILTER_IN_SELFCOR, 0x1);
320         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
321                       AR_PHY_TIMING4_ENABLE_SPUR_RSSI, 0x1);
322         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
323                       AR_PHY_SPUR_REG_SPUR_RSSI_THRESH, 34);
324         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
325                       AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1);
326
327         if (REG_READ_FIELD(ah, AR_PHY_MODE,
328                            AR_PHY_MODE_DYNAMIC) == 0x1)
329                 REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
330                               AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1);
331
332         mask_index = (freq_offset << 4) / 5;
333         if (mask_index < 0)
334                 mask_index = mask_index - 1;
335
336         mask_index = mask_index & 0x7f;
337
338         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
339                       AR_PHY_SPUR_REG_ENABLE_MASK_PPM, 0x1);
340         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
341                       AR_PHY_TIMING4_ENABLE_PILOT_MASK, 0x1);
342         REG_RMW_FIELD(ah, AR_PHY_TIMING4,
343                       AR_PHY_TIMING4_ENABLE_CHAN_MASK, 0x1);
344         REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
345                       AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_IDX_A, mask_index);
346         REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
347                       AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_IDX_A, mask_index);
348         REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
349                       AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_IDX_A, mask_index);
350         REG_RMW_FIELD(ah, AR_PHY_PILOT_SPUR_MASK,
351                       AR_PHY_PILOT_SPUR_MASK_CF_PILOT_MASK_A, 0xc);
352         REG_RMW_FIELD(ah, AR_PHY_CHAN_SPUR_MASK,
353                       AR_PHY_CHAN_SPUR_MASK_CF_CHAN_MASK_A, 0xc);
354         REG_RMW_FIELD(ah, AR_PHY_SPUR_MASK_A,
355                       AR_PHY_SPUR_MASK_A_CF_PUNC_MASK_A, 0xa0);
356         REG_RMW_FIELD(ah, AR_PHY_SPUR_REG,
357                       AR_PHY_SPUR_REG_MASK_RATE_CNTL, 0xff);
358 }
359
360 static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah,
361                                      struct ath9k_channel *chan,
362                                      int freq_offset)
363 {
364         int spur_freq_sd = 0;
365         int spur_subchannel_sd = 0;
366         int spur_delta_phase = 0;
367
368         if (IS_CHAN_HT40(chan)) {
369                 if (freq_offset < 0) {
370                         if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
371                                            AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
372                                 spur_subchannel_sd = 1;
373                         else
374                                 spur_subchannel_sd = 0;
375
376                         spur_freq_sd = (freq_offset << 9) / 11;
377
378                 } else {
379                         if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
380                             AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
381                                 spur_subchannel_sd = 0;
382                         else
383                                 spur_subchannel_sd = 1;
384
385                         spur_freq_sd = (freq_offset << 9) / 11;
386
387                 }
388
389                 spur_delta_phase = (freq_offset << 17) / 5;
390
391         } else {
392                 spur_subchannel_sd = 0;
393                 spur_freq_sd = (freq_offset << 9) /11;
394                 spur_delta_phase = (freq_offset << 18) / 5;
395         }
396
397         spur_freq_sd = spur_freq_sd & 0x3ff;
398         spur_delta_phase = spur_delta_phase & 0xfffff;
399
400         ar9003_hw_spur_ofdm(ah,
401                             freq_offset,
402                             spur_freq_sd,
403                             spur_delta_phase,
404                             spur_subchannel_sd);
405 }
406
407 /* Spur mitigation for OFDM */
408 static void ar9003_hw_spur_mitigate_ofdm(struct ath_hw *ah,
409                                          struct ath9k_channel *chan)
410 {
411         int synth_freq;
412         int range = 10;
413         int freq_offset = 0;
414         int mode;
415         u8* spurChansPtr;
416         unsigned int i;
417         struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
418
419         if (IS_CHAN_5GHZ(chan)) {
420                 spurChansPtr = &(eep->modalHeader5G.spurChans[0]);
421                 mode = 0;
422         }
423         else {
424                 spurChansPtr = &(eep->modalHeader2G.spurChans[0]);
425                 mode = 1;
426         }
427
428         if (spurChansPtr[0] == 0)
429                 return; /* No spur in the mode */
430
431         if (IS_CHAN_HT40(chan)) {
432                 range = 19;
433                 if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
434                                    AR_PHY_GC_DYN2040_PRI_CH) == 0x0)
435                         synth_freq = chan->channel - 10;
436                 else
437                         synth_freq = chan->channel + 10;
438         } else {
439                 range = 10;
440                 synth_freq = chan->channel;
441         }
442
443         ar9003_hw_spur_ofdm_clear(ah);
444
445         for (i = 0; i < AR_EEPROM_MODAL_SPURS && spurChansPtr[i]; i++) {
446                 freq_offset = FBIN2FREQ(spurChansPtr[i], mode) - synth_freq;
447                 if (abs(freq_offset) < range) {
448                         ar9003_hw_spur_ofdm_work(ah, chan, freq_offset);
449                         break;
450                 }
451         }
452 }
453
454 static void ar9003_hw_spur_mitigate(struct ath_hw *ah,
455                                     struct ath9k_channel *chan)
456 {
457         ar9003_hw_spur_mitigate_mrc_cck(ah, chan);
458         ar9003_hw_spur_mitigate_ofdm(ah, chan);
459 }
460
461 static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah,
462                                          struct ath9k_channel *chan)
463 {
464         u32 pll;
465
466         pll = SM(0x5, AR_RTC_9300_PLL_REFDIV);
467
468         if (chan && IS_CHAN_HALF_RATE(chan))
469                 pll |= SM(0x1, AR_RTC_9300_PLL_CLKSEL);
470         else if (chan && IS_CHAN_QUARTER_RATE(chan))
471                 pll |= SM(0x2, AR_RTC_9300_PLL_CLKSEL);
472
473         pll |= SM(0x2c, AR_RTC_9300_PLL_DIV);
474
475         return pll;
476 }
477
478 static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
479                                        struct ath9k_channel *chan)
480 {
481         u32 phymode;
482         u32 enableDacFifo = 0;
483
484         enableDacFifo =
485                 (REG_READ(ah, AR_PHY_GEN_CTRL) & AR_PHY_GC_ENABLE_DAC_FIFO);
486
487         /* Enable 11n HT, 20 MHz */
488         phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 |
489                   AR_PHY_GC_SHORT_GI_40 | enableDacFifo;
490
491         /* Configure baseband for dynamic 20/40 operation */
492         if (IS_CHAN_HT40(chan)) {
493                 phymode |= AR_PHY_GC_DYN2040_EN;
494                 /* Configure control (primary) channel at +-10MHz */
495                 if ((chan->chanmode == CHANNEL_A_HT40PLUS) ||
496                     (chan->chanmode == CHANNEL_G_HT40PLUS))
497                         phymode |= AR_PHY_GC_DYN2040_PRI_CH;
498
499         }
500
501         /* make sure we preserve INI settings */
502         phymode |= REG_READ(ah, AR_PHY_GEN_CTRL);
503         /* turn off Green Field detection for STA for now */
504         phymode &= ~AR_PHY_GC_GF_DETECT_EN;
505
506         REG_WRITE(ah, AR_PHY_GEN_CTRL, phymode);
507
508         /* Configure MAC for 20/40 operation */
509         ath9k_hw_set11nmac2040(ah);
510
511         /* global transmit timeout (25 TUs default)*/
512         REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
513         /* carrier sense timeout */
514         REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
515 }
516
517 static void ar9003_hw_init_bb(struct ath_hw *ah,
518                               struct ath9k_channel *chan)
519 {
520         u32 synthDelay;
521
522         /*
523          * Wait for the frequency synth to settle (synth goes on
524          * via AR_PHY_ACTIVE_EN).  Read the phy active delay register.
525          * Value is in 100ns increments.
526          */
527         synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
528         if (IS_CHAN_B(chan))
529                 synthDelay = (4 * synthDelay) / 22;
530         else
531                 synthDelay /= 10;
532
533         /* Activate the PHY (includes baseband activate + synthesizer on) */
534         REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
535
536         /*
537          * There is an issue if the AP starts the calibration before
538          * the base band timeout completes.  This could result in the
539          * rx_clear false triggering.  As a workaround we add delay an
540          * extra BASE_ACTIVATE_DELAY usecs to ensure this condition
541          * does not happen.
542          */
543         udelay(synthDelay + BASE_ACTIVATE_DELAY);
544 }
545
546 static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
547 {
548         switch (rx) {
549         case 0x5:
550                 REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
551                             AR_PHY_SWAP_ALT_CHAIN);
552         case 0x3:
553         case 0x1:
554         case 0x2:
555         case 0x7:
556                 REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx);
557                 REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx);
558                 break;
559         default:
560                 break;
561         }
562
563         if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7))
564                 REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
565         else if (AR_SREV_9462(ah))
566                 /* xxx only when MCI support is enabled */
567                 REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
568         else
569                 REG_WRITE(ah, AR_SELFGEN_MASK, tx);
570
571         if (tx == 0x5) {
572                 REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
573                             AR_PHY_SWAP_ALT_CHAIN);
574         }
575 }
576
577 /*
578  * Override INI values with chip specific configuration.
579  */
580 static void ar9003_hw_override_ini(struct ath_hw *ah)
581 {
582         u32 val;
583
584         /*
585          * Set the RX_ABORT and RX_DIS and clear it only after
586          * RXE is set for MAC. This prevents frames with
587          * corrupted descriptor status.
588          */
589         REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
590
591         /*
592          * For AR9280 and above, there is a new feature that allows
593          * Multicast search based on both MAC Address and Key ID. By default,
594          * this feature is enabled. But since the driver is not using this
595          * feature, we switch it off; otherwise multicast search based on
596          * MAC addr only will fail.
597          */
598         val = REG_READ(ah, AR_PCU_MISC_MODE2) & (~AR_ADHOC_MCAST_KEYID_ENABLE);
599         REG_WRITE(ah, AR_PCU_MISC_MODE2,
600                   val | AR_AGG_WEP_ENABLE_FIX | AR_AGG_WEP_ENABLE);
601
602         REG_SET_BIT(ah, AR_PHY_CCK_DETECT,
603                     AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
604 }
605
606 static void ar9003_hw_prog_ini(struct ath_hw *ah,
607                                struct ar5416IniArray *iniArr,
608                                int column)
609 {
610         unsigned int i, regWrites = 0;
611
612         /* New INI format: Array may be undefined (pre, core, post arrays) */
613         if (!iniArr->ia_array)
614                 return;
615
616         /*
617          * New INI format: Pre, core, and post arrays for a given subsystem
618          * may be modal (> 2 columns) or non-modal (2 columns). Determine if
619          * the array is non-modal and force the column to 1.
620          */
621         if (column >= iniArr->ia_columns)
622                 column = 1;
623
624         for (i = 0; i < iniArr->ia_rows; i++) {
625                 u32 reg = INI_RA(iniArr, i, 0);
626                 u32 val = INI_RA(iniArr, i, column);
627
628                 REG_WRITE(ah, reg, val);
629
630                 DO_DELAY(regWrites);
631         }
632 }
633
634 static int ar9003_hw_process_ini(struct ath_hw *ah,
635                                  struct ath9k_channel *chan)
636 {
637         unsigned int regWrites = 0, i;
638         u32 modesIndex;
639
640         switch (chan->chanmode) {
641         case CHANNEL_A:
642         case CHANNEL_A_HT20:
643                 modesIndex = 1;
644                 break;
645         case CHANNEL_A_HT40PLUS:
646         case CHANNEL_A_HT40MINUS:
647                 modesIndex = 2;
648                 break;
649         case CHANNEL_G:
650         case CHANNEL_G_HT20:
651         case CHANNEL_B:
652                 modesIndex = 4;
653                 break;
654         case CHANNEL_G_HT40PLUS:
655         case CHANNEL_G_HT40MINUS:
656                 modesIndex = 3;
657                 break;
658
659         default:
660                 return -EINVAL;
661         }
662
663         for (i = 0; i < ATH_INI_NUM_SPLIT; i++) {
664                 ar9003_hw_prog_ini(ah, &ah->iniSOC[i], modesIndex);
665                 ar9003_hw_prog_ini(ah, &ah->iniMac[i], modesIndex);
666                 ar9003_hw_prog_ini(ah, &ah->iniBB[i], modesIndex);
667                 ar9003_hw_prog_ini(ah, &ah->iniRadio[i], modesIndex);
668                 if (i == ATH_INI_POST && AR_SREV_9462_20(ah))
669                         ar9003_hw_prog_ini(ah,
670                                            &ah->ini_radio_post_sys2ant,
671                                            modesIndex);
672         }
673
674         REG_WRITE_ARRAY(&ah->iniModesRxGain, 1, regWrites);
675         REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
676
677         /*
678          * For 5GHz channels requiring Fast Clock, apply
679          * different modal values.
680          */
681         if (IS_CHAN_A_FAST_CLOCK(ah, chan))
682                 REG_WRITE_ARRAY(&ah->iniModesFastClock,
683                                 modesIndex, regWrites);
684
685         REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
686
687         if (AR_SREV_9462(ah))
688                 ar9003_hw_prog_ini(ah, &ah->ini_BTCOEX_MAX_TXPWR, 1);
689
690         if (chan->channel == 2484)
691                 ar9003_hw_prog_ini(ah, &ah->ini_japan2484, 1);
692
693         ah->modes_index = modesIndex;
694         ar9003_hw_override_ini(ah);
695         ar9003_hw_set_channel_regs(ah, chan);
696         ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
697         ath9k_hw_apply_txpower(ah, chan);
698
699         if (AR_SREV_9462(ah)) {
700                 if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
701                                 AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL))
702                         ah->enabled_cals |= TX_IQ_CAL;
703                 else
704                         ah->enabled_cals &= ~TX_IQ_CAL;
705
706                 if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE)
707                         ah->enabled_cals |= TX_CL_CAL;
708                 else
709                         ah->enabled_cals &= ~TX_CL_CAL;
710         }
711
712         return 0;
713 }
714
715 static void ar9003_hw_set_rfmode(struct ath_hw *ah,
716                                  struct ath9k_channel *chan)
717 {
718         u32 rfMode = 0;
719
720         if (chan == NULL)
721                 return;
722
723         rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan))
724                 ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM;
725
726         if (IS_CHAN_A_FAST_CLOCK(ah, chan))
727                 rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
728
729         REG_WRITE(ah, AR_PHY_MODE, rfMode);
730 }
731
732 static void ar9003_hw_mark_phy_inactive(struct ath_hw *ah)
733 {
734         REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
735 }
736
737 static void ar9003_hw_set_delta_slope(struct ath_hw *ah,
738                                       struct ath9k_channel *chan)
739 {
740         u32 coef_scaled, ds_coef_exp, ds_coef_man;
741         u32 clockMhzScaled = 0x64000000;
742         struct chan_centers centers;
743
744         /*
745          * half and quarter rate can divide the scaled clock by 2 or 4
746          * scale for selected channel bandwidth
747          */
748         if (IS_CHAN_HALF_RATE(chan))
749                 clockMhzScaled = clockMhzScaled >> 1;
750         else if (IS_CHAN_QUARTER_RATE(chan))
751                 clockMhzScaled = clockMhzScaled >> 2;
752
753         /*
754          * ALGO -> coef = 1e8/fcarrier*fclock/40;
755          * scaled coef to provide precision for this floating calculation
756          */
757         ath9k_hw_get_channel_centers(ah, chan, &centers);
758         coef_scaled = clockMhzScaled / centers.synth_center;
759
760         ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
761                                       &ds_coef_exp);
762
763         REG_RMW_FIELD(ah, AR_PHY_TIMING3,
764                       AR_PHY_TIMING3_DSC_MAN, ds_coef_man);
765         REG_RMW_FIELD(ah, AR_PHY_TIMING3,
766                       AR_PHY_TIMING3_DSC_EXP, ds_coef_exp);
767
768         /*
769          * For Short GI,
770          * scaled coeff is 9/10 that of normal coeff
771          */
772         coef_scaled = (9 * coef_scaled) / 10;
773
774         ath9k_hw_get_delta_slope_vals(ah, coef_scaled, &ds_coef_man,
775                                       &ds_coef_exp);
776
777         /* for short gi */
778         REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
779                       AR_PHY_SGI_DSC_MAN, ds_coef_man);
780         REG_RMW_FIELD(ah, AR_PHY_SGI_DELTA,
781                       AR_PHY_SGI_DSC_EXP, ds_coef_exp);
782 }
783
784 static bool ar9003_hw_rfbus_req(struct ath_hw *ah)
785 {
786         REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
787         return ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
788                              AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT);
789 }
790
791 /*
792  * Wait for the frequency synth to settle (synth goes on via PHY_ACTIVE_EN).
793  * Read the phy active delay register. Value is in 100ns increments.
794  */
795 static void ar9003_hw_rfbus_done(struct ath_hw *ah)
796 {
797         u32 synthDelay = REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
798         if (IS_CHAN_B(ah->curchan))
799                 synthDelay = (4 * synthDelay) / 22;
800         else
801                 synthDelay /= 10;
802
803         udelay(synthDelay + BASE_ACTIVATE_DELAY);
804
805         REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
806 }
807
808 static bool ar9003_hw_ani_control(struct ath_hw *ah,
809                                   enum ath9k_ani_cmd cmd, int param)
810 {
811         struct ath_common *common = ath9k_hw_common(ah);
812         struct ath9k_channel *chan = ah->curchan;
813         struct ar5416AniState *aniState = &chan->ani;
814         s32 value, value2;
815
816         switch (cmd & ah->ani_function) {
817         case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
818                 /*
819                  * on == 1 means ofdm weak signal detection is ON
820                  * on == 1 is the default, for less noise immunity
821                  *
822                  * on == 0 means ofdm weak signal detection is OFF
823                  * on == 0 means more noise imm
824                  */
825                 u32 on = param ? 1 : 0;
826                 /*
827                  * make register setting for default
828                  * (weak sig detect ON) come from INI file
829                  */
830                 int m1ThreshLow = on ?
831                         aniState->iniDef.m1ThreshLow : m1ThreshLow_off;
832                 int m2ThreshLow = on ?
833                         aniState->iniDef.m2ThreshLow : m2ThreshLow_off;
834                 int m1Thresh = on ?
835                         aniState->iniDef.m1Thresh : m1Thresh_off;
836                 int m2Thresh = on ?
837                         aniState->iniDef.m2Thresh : m2Thresh_off;
838                 int m2CountThr = on ?
839                         aniState->iniDef.m2CountThr : m2CountThr_off;
840                 int m2CountThrLow = on ?
841                         aniState->iniDef.m2CountThrLow : m2CountThrLow_off;
842                 int m1ThreshLowExt = on ?
843                         aniState->iniDef.m1ThreshLowExt : m1ThreshLowExt_off;
844                 int m2ThreshLowExt = on ?
845                         aniState->iniDef.m2ThreshLowExt : m2ThreshLowExt_off;
846                 int m1ThreshExt = on ?
847                         aniState->iniDef.m1ThreshExt : m1ThreshExt_off;
848                 int m2ThreshExt = on ?
849                         aniState->iniDef.m2ThreshExt : m2ThreshExt_off;
850
851                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
852                               AR_PHY_SFCORR_LOW_M1_THRESH_LOW,
853                               m1ThreshLow);
854                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
855                               AR_PHY_SFCORR_LOW_M2_THRESH_LOW,
856                               m2ThreshLow);
857                 REG_RMW_FIELD(ah, AR_PHY_SFCORR,
858                               AR_PHY_SFCORR_M1_THRESH, m1Thresh);
859                 REG_RMW_FIELD(ah, AR_PHY_SFCORR,
860                               AR_PHY_SFCORR_M2_THRESH, m2Thresh);
861                 REG_RMW_FIELD(ah, AR_PHY_SFCORR,
862                               AR_PHY_SFCORR_M2COUNT_THR, m2CountThr);
863                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
864                               AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW,
865                               m2CountThrLow);
866
867                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
868                               AR_PHY_SFCORR_EXT_M1_THRESH_LOW, m1ThreshLowExt);
869                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
870                               AR_PHY_SFCORR_EXT_M2_THRESH_LOW, m2ThreshLowExt);
871                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
872                               AR_PHY_SFCORR_EXT_M1_THRESH, m1ThreshExt);
873                 REG_RMW_FIELD(ah, AR_PHY_SFCORR_EXT,
874                               AR_PHY_SFCORR_EXT_M2_THRESH, m2ThreshExt);
875
876                 if (on)
877                         REG_SET_BIT(ah, AR_PHY_SFCORR_LOW,
878                                     AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
879                 else
880                         REG_CLR_BIT(ah, AR_PHY_SFCORR_LOW,
881                                     AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
882
883                 if (!on != aniState->ofdmWeakSigDetectOff) {
884                         ath_dbg(common, ANI,
885                                 "** ch %d: ofdm weak signal: %s=>%s\n",
886                                 chan->channel,
887                                 !aniState->ofdmWeakSigDetectOff ?
888                                 "on" : "off",
889                                 on ? "on" : "off");
890                         if (on)
891                                 ah->stats.ast_ani_ofdmon++;
892                         else
893                                 ah->stats.ast_ani_ofdmoff++;
894                         aniState->ofdmWeakSigDetectOff = !on;
895                 }
896                 break;
897         }
898         case ATH9K_ANI_FIRSTEP_LEVEL:{
899                 u32 level = param;
900
901                 if (level >= ARRAY_SIZE(firstep_table)) {
902                         ath_dbg(common, ANI,
903                                 "ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
904                                 level, ARRAY_SIZE(firstep_table));
905                         return false;
906                 }
907
908                 /*
909                  * make register setting relative to default
910                  * from INI file & cap value
911                  */
912                 value = firstep_table[level] -
913                         firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
914                         aniState->iniDef.firstep;
915                 if (value < ATH9K_SIG_FIRSTEP_SETTING_MIN)
916                         value = ATH9K_SIG_FIRSTEP_SETTING_MIN;
917                 if (value > ATH9K_SIG_FIRSTEP_SETTING_MAX)
918                         value = ATH9K_SIG_FIRSTEP_SETTING_MAX;
919                 REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
920                               AR_PHY_FIND_SIG_FIRSTEP,
921                               value);
922                 /*
923                  * we need to set first step low register too
924                  * make register setting relative to default
925                  * from INI file & cap value
926                  */
927                 value2 = firstep_table[level] -
928                          firstep_table[ATH9K_ANI_FIRSTEP_LVL_NEW] +
929                          aniState->iniDef.firstepLow;
930                 if (value2 < ATH9K_SIG_FIRSTEP_SETTING_MIN)
931                         value2 = ATH9K_SIG_FIRSTEP_SETTING_MIN;
932                 if (value2 > ATH9K_SIG_FIRSTEP_SETTING_MAX)
933                         value2 = ATH9K_SIG_FIRSTEP_SETTING_MAX;
934
935                 REG_RMW_FIELD(ah, AR_PHY_FIND_SIG_LOW,
936                               AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW, value2);
937
938                 if (level != aniState->firstepLevel) {
939                         ath_dbg(common, ANI,
940                                 "** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
941                                 chan->channel,
942                                 aniState->firstepLevel,
943                                 level,
944                                 ATH9K_ANI_FIRSTEP_LVL_NEW,
945                                 value,
946                                 aniState->iniDef.firstep);
947                         ath_dbg(common, ANI,
948                                 "** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
949                                 chan->channel,
950                                 aniState->firstepLevel,
951                                 level,
952                                 ATH9K_ANI_FIRSTEP_LVL_NEW,
953                                 value2,
954                                 aniState->iniDef.firstepLow);
955                         if (level > aniState->firstepLevel)
956                                 ah->stats.ast_ani_stepup++;
957                         else if (level < aniState->firstepLevel)
958                                 ah->stats.ast_ani_stepdown++;
959                         aniState->firstepLevel = level;
960                 }
961                 break;
962         }
963         case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
964                 u32 level = param;
965
966                 if (level >= ARRAY_SIZE(cycpwrThr1_table)) {
967                         ath_dbg(common, ANI,
968                                 "ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
969                                 level, ARRAY_SIZE(cycpwrThr1_table));
970                         return false;
971                 }
972                 /*
973                  * make register setting relative to default
974                  * from INI file & cap value
975                  */
976                 value = cycpwrThr1_table[level] -
977                         cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
978                         aniState->iniDef.cycpwrThr1;
979                 if (value < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
980                         value = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
981                 if (value > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
982                         value = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
983                 REG_RMW_FIELD(ah, AR_PHY_TIMING5,
984                               AR_PHY_TIMING5_CYCPWR_THR1,
985                               value);
986
987                 /*
988                  * set AR_PHY_EXT_CCA for extension channel
989                  * make register setting relative to default
990                  * from INI file & cap value
991                  */
992                 value2 = cycpwrThr1_table[level] -
993                          cycpwrThr1_table[ATH9K_ANI_SPUR_IMMUNE_LVL_NEW] +
994                          aniState->iniDef.cycpwrThr1Ext;
995                 if (value2 < ATH9K_SIG_SPUR_IMM_SETTING_MIN)
996                         value2 = ATH9K_SIG_SPUR_IMM_SETTING_MIN;
997                 if (value2 > ATH9K_SIG_SPUR_IMM_SETTING_MAX)
998                         value2 = ATH9K_SIG_SPUR_IMM_SETTING_MAX;
999                 REG_RMW_FIELD(ah, AR_PHY_EXT_CCA,
1000                               AR_PHY_EXT_CYCPWR_THR1, value2);
1001
1002                 if (level != aniState->spurImmunityLevel) {
1003                         ath_dbg(common, ANI,
1004                                 "** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
1005                                 chan->channel,
1006                                 aniState->spurImmunityLevel,
1007                                 level,
1008                                 ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
1009                                 value,
1010                                 aniState->iniDef.cycpwrThr1);
1011                         ath_dbg(common, ANI,
1012                                 "** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
1013                                 chan->channel,
1014                                 aniState->spurImmunityLevel,
1015                                 level,
1016                                 ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
1017                                 value2,
1018                                 aniState->iniDef.cycpwrThr1Ext);
1019                         if (level > aniState->spurImmunityLevel)
1020                                 ah->stats.ast_ani_spurup++;
1021                         else if (level < aniState->spurImmunityLevel)
1022                                 ah->stats.ast_ani_spurdown++;
1023                         aniState->spurImmunityLevel = level;
1024                 }
1025                 break;
1026         }
1027         case ATH9K_ANI_MRC_CCK:{
1028                 /*
1029                  * is_on == 1 means MRC CCK ON (default, less noise imm)
1030                  * is_on == 0 means MRC CCK is OFF (more noise imm)
1031                  */
1032                 bool is_on = param ? 1 : 0;
1033                 REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
1034                               AR_PHY_MRC_CCK_ENABLE, is_on);
1035                 REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
1036                               AR_PHY_MRC_CCK_MUX_REG, is_on);
1037                 if (!is_on != aniState->mrcCCKOff) {
1038                         ath_dbg(common, ANI, "** ch %d: MRC CCK: %s=>%s\n",
1039                                 chan->channel,
1040                                 !aniState->mrcCCKOff ? "on" : "off",
1041                                 is_on ? "on" : "off");
1042                 if (is_on)
1043                         ah->stats.ast_ani_ccklow++;
1044                 else
1045                         ah->stats.ast_ani_cckhigh++;
1046                 aniState->mrcCCKOff = !is_on;
1047                 }
1048         break;
1049         }
1050         case ATH9K_ANI_PRESENT:
1051                 break;
1052         default:
1053                 ath_dbg(common, ANI, "invalid cmd %u\n", cmd);
1054                 return false;
1055         }
1056
1057         ath_dbg(common, ANI,
1058                 "ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
1059                 aniState->spurImmunityLevel,
1060                 !aniState->ofdmWeakSigDetectOff ? "on" : "off",
1061                 aniState->firstepLevel,
1062                 !aniState->mrcCCKOff ? "on" : "off",
1063                 aniState->listenTime,
1064                 aniState->ofdmPhyErrCount,
1065                 aniState->cckPhyErrCount);
1066         return true;
1067 }
1068
1069 static void ar9003_hw_do_getnf(struct ath_hw *ah,
1070                               int16_t nfarray[NUM_NF_READINGS])
1071 {
1072 #define AR_PHY_CH_MINCCA_PWR    0x1FF00000
1073 #define AR_PHY_CH_MINCCA_PWR_S  20
1074 #define AR_PHY_CH_EXT_MINCCA_PWR 0x01FF0000
1075 #define AR_PHY_CH_EXT_MINCCA_PWR_S 16
1076
1077         int16_t nf;
1078         int i;
1079
1080         for (i = 0; i < AR9300_MAX_CHAINS; i++) {
1081                 if (ah->rxchainmask & BIT(i)) {
1082                         nf = MS(REG_READ(ah, ah->nf_regs[i]),
1083                                          AR_PHY_CH_MINCCA_PWR);
1084                         nfarray[i] = sign_extend32(nf, 8);
1085
1086                         if (IS_CHAN_HT40(ah->curchan)) {
1087                                 u8 ext_idx = AR9300_MAX_CHAINS + i;
1088
1089                                 nf = MS(REG_READ(ah, ah->nf_regs[ext_idx]),
1090                                                  AR_PHY_CH_EXT_MINCCA_PWR);
1091                                 nfarray[ext_idx] = sign_extend32(nf, 8);
1092                         }
1093                 }
1094         }
1095 }
1096
1097 static void ar9003_hw_set_nf_limits(struct ath_hw *ah)
1098 {
1099         ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_2GHZ;
1100         ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_2GHZ;
1101         ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9300_2GHZ;
1102         ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9300_5GHZ;
1103         ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9300_5GHZ;
1104         ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9300_5GHZ;
1105
1106         if (AR_SREV_9330(ah))
1107                 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9330_2GHZ;
1108
1109         if (AR_SREV_9462(ah)) {
1110                 ah->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_2GHZ;
1111                 ah->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9462_2GHZ;
1112                 ah->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9462_5GHZ;
1113                 ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9462_5GHZ;
1114         }
1115 }
1116
1117 /*
1118  * Initialize the ANI register values with default (ini) values.
1119  * This routine is called during a (full) hardware reset after
1120  * all the registers are initialised from the INI.
1121  */
1122 static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
1123 {
1124         struct ar5416AniState *aniState;
1125         struct ath_common *common = ath9k_hw_common(ah);
1126         struct ath9k_channel *chan = ah->curchan;
1127         struct ath9k_ani_default *iniDef;
1128         u32 val;
1129
1130         aniState = &ah->curchan->ani;
1131         iniDef = &aniState->iniDef;
1132
1133         ath_dbg(common, ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
1134                 ah->hw_version.macVersion,
1135                 ah->hw_version.macRev,
1136                 ah->opmode,
1137                 chan->channel,
1138                 chan->channelFlags);
1139
1140         val = REG_READ(ah, AR_PHY_SFCORR);
1141         iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
1142         iniDef->m2Thresh = MS(val, AR_PHY_SFCORR_M2_THRESH);
1143         iniDef->m2CountThr = MS(val, AR_PHY_SFCORR_M2COUNT_THR);
1144
1145         val = REG_READ(ah, AR_PHY_SFCORR_LOW);
1146         iniDef->m1ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M1_THRESH_LOW);
1147         iniDef->m2ThreshLow = MS(val, AR_PHY_SFCORR_LOW_M2_THRESH_LOW);
1148         iniDef->m2CountThrLow = MS(val, AR_PHY_SFCORR_LOW_M2COUNT_THR_LOW);
1149
1150         val = REG_READ(ah, AR_PHY_SFCORR_EXT);
1151         iniDef->m1ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH);
1152         iniDef->m2ThreshExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH);
1153         iniDef->m1ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M1_THRESH_LOW);
1154         iniDef->m2ThreshLowExt = MS(val, AR_PHY_SFCORR_EXT_M2_THRESH_LOW);
1155         iniDef->firstep = REG_READ_FIELD(ah,
1156                                          AR_PHY_FIND_SIG,
1157                                          AR_PHY_FIND_SIG_FIRSTEP);
1158         iniDef->firstepLow = REG_READ_FIELD(ah,
1159                                             AR_PHY_FIND_SIG_LOW,
1160                                             AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW);
1161         iniDef->cycpwrThr1 = REG_READ_FIELD(ah,
1162                                             AR_PHY_TIMING5,
1163                                             AR_PHY_TIMING5_CYCPWR_THR1);
1164         iniDef->cycpwrThr1Ext = REG_READ_FIELD(ah,
1165                                                AR_PHY_EXT_CCA,
1166                                                AR_PHY_EXT_CYCPWR_THR1);
1167
1168         /* these levels just got reset to defaults by the INI */
1169         aniState->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL_NEW;
1170         aniState->firstepLevel = ATH9K_ANI_FIRSTEP_LVL_NEW;
1171         aniState->ofdmWeakSigDetectOff = !ATH9K_ANI_USE_OFDM_WEAK_SIG;
1172         aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
1173 }
1174
1175 static void ar9003_hw_set_radar_params(struct ath_hw *ah,
1176                                        struct ath_hw_radar_conf *conf)
1177 {
1178         u32 radar_0 = 0, radar_1 = 0;
1179
1180         if (!conf) {
1181                 REG_CLR_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_ENA);
1182                 return;
1183         }
1184
1185         radar_0 |= AR_PHY_RADAR_0_ENA | AR_PHY_RADAR_0_FFT_ENA;
1186         radar_0 |= SM(conf->fir_power, AR_PHY_RADAR_0_FIRPWR);
1187         radar_0 |= SM(conf->radar_rssi, AR_PHY_RADAR_0_RRSSI);
1188         radar_0 |= SM(conf->pulse_height, AR_PHY_RADAR_0_HEIGHT);
1189         radar_0 |= SM(conf->pulse_rssi, AR_PHY_RADAR_0_PRSSI);
1190         radar_0 |= SM(conf->pulse_inband, AR_PHY_RADAR_0_INBAND);
1191
1192         radar_1 |= AR_PHY_RADAR_1_MAX_RRSSI;
1193         radar_1 |= AR_PHY_RADAR_1_BLOCK_CHECK;
1194         radar_1 |= SM(conf->pulse_maxlen, AR_PHY_RADAR_1_MAXLEN);
1195         radar_1 |= SM(conf->pulse_inband_step, AR_PHY_RADAR_1_RELSTEP_THRESH);
1196         radar_1 |= SM(conf->radar_inband, AR_PHY_RADAR_1_RELPWR_THRESH);
1197
1198         REG_WRITE(ah, AR_PHY_RADAR_0, radar_0);
1199         REG_WRITE(ah, AR_PHY_RADAR_1, radar_1);
1200         if (conf->ext_channel)
1201                 REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
1202         else
1203                 REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
1204 }
1205
1206 static void ar9003_hw_set_radar_conf(struct ath_hw *ah)
1207 {
1208         struct ath_hw_radar_conf *conf = &ah->radar_conf;
1209
1210         conf->fir_power = -28;
1211         conf->radar_rssi = 0;
1212         conf->pulse_height = 10;
1213         conf->pulse_rssi = 24;
1214         conf->pulse_inband = 8;
1215         conf->pulse_maxlen = 255;
1216         conf->pulse_inband_step = 12;
1217         conf->radar_inband = 8;
1218 }
1219
1220 static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah,
1221                                    struct ath_hw_antcomb_conf *antconf)
1222 {
1223         u32 regval;
1224
1225         regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
1226         antconf->main_lna_conf = (regval & AR_PHY_9485_ANT_DIV_MAIN_LNACONF) >>
1227                                   AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S;
1228         antconf->alt_lna_conf = (regval & AR_PHY_9485_ANT_DIV_ALT_LNACONF) >>
1229                                  AR_PHY_9485_ANT_DIV_ALT_LNACONF_S;
1230         antconf->fast_div_bias = (regval & AR_PHY_9485_ANT_FAST_DIV_BIAS) >>
1231                                   AR_PHY_9485_ANT_FAST_DIV_BIAS_S;
1232
1233         if (AR_SREV_9330_11(ah)) {
1234                 antconf->lna1_lna2_delta = -9;
1235                 antconf->div_group = 1;
1236         } else if (AR_SREV_9485(ah)) {
1237                 antconf->lna1_lna2_delta = -9;
1238                 antconf->div_group = 2;
1239         } else {
1240                 antconf->lna1_lna2_delta = -3;
1241                 antconf->div_group = 0;
1242         }
1243 }
1244
1245 static void ar9003_hw_antdiv_comb_conf_set(struct ath_hw *ah,
1246                                    struct ath_hw_antcomb_conf *antconf)
1247 {
1248         u32 regval;
1249
1250         regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL);
1251         regval &= ~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF |
1252                     AR_PHY_9485_ANT_DIV_ALT_LNACONF |
1253                     AR_PHY_9485_ANT_FAST_DIV_BIAS |
1254                     AR_PHY_9485_ANT_DIV_MAIN_GAINTB |
1255                     AR_PHY_9485_ANT_DIV_ALT_GAINTB);
1256         regval |= ((antconf->main_lna_conf <<
1257                                         AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S)
1258                    & AR_PHY_9485_ANT_DIV_MAIN_LNACONF);
1259         regval |= ((antconf->alt_lna_conf << AR_PHY_9485_ANT_DIV_ALT_LNACONF_S)
1260                    & AR_PHY_9485_ANT_DIV_ALT_LNACONF);
1261         regval |= ((antconf->fast_div_bias << AR_PHY_9485_ANT_FAST_DIV_BIAS_S)
1262                    & AR_PHY_9485_ANT_FAST_DIV_BIAS);
1263         regval |= ((antconf->main_gaintb << AR_PHY_9485_ANT_DIV_MAIN_GAINTB_S)
1264                    & AR_PHY_9485_ANT_DIV_MAIN_GAINTB);
1265         regval |= ((antconf->alt_gaintb << AR_PHY_9485_ANT_DIV_ALT_GAINTB_S)
1266                    & AR_PHY_9485_ANT_DIV_ALT_GAINTB);
1267
1268         REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval);
1269 }
1270
1271 static int ar9003_hw_fast_chan_change(struct ath_hw *ah,
1272                                       struct ath9k_channel *chan,
1273                                       u8 *ini_reloaded)
1274 {
1275         unsigned int regWrites = 0;
1276         u32 modesIndex;
1277
1278         switch (chan->chanmode) {
1279         case CHANNEL_A:
1280         case CHANNEL_A_HT20:
1281                 modesIndex = 1;
1282                 break;
1283         case CHANNEL_A_HT40PLUS:
1284         case CHANNEL_A_HT40MINUS:
1285                 modesIndex = 2;
1286                 break;
1287         case CHANNEL_G:
1288         case CHANNEL_G_HT20:
1289         case CHANNEL_B:
1290                 modesIndex = 4;
1291                 break;
1292         case CHANNEL_G_HT40PLUS:
1293         case CHANNEL_G_HT40MINUS:
1294                 modesIndex = 3;
1295                 break;
1296
1297         default:
1298                 return -EINVAL;
1299         }
1300
1301         if (modesIndex == ah->modes_index) {
1302                 *ini_reloaded = false;
1303                 goto set_rfmode;
1304         }
1305
1306         ar9003_hw_prog_ini(ah, &ah->iniSOC[ATH_INI_POST], modesIndex);
1307         ar9003_hw_prog_ini(ah, &ah->iniMac[ATH_INI_POST], modesIndex);
1308         ar9003_hw_prog_ini(ah, &ah->iniBB[ATH_INI_POST], modesIndex);
1309         ar9003_hw_prog_ini(ah, &ah->iniRadio[ATH_INI_POST], modesIndex);
1310         if (AR_SREV_9462_20(ah))
1311                 ar9003_hw_prog_ini(ah,
1312                                 &ah->ini_radio_post_sys2ant,
1313                                 modesIndex);
1314
1315         REG_WRITE_ARRAY(&ah->iniModesTxGain, modesIndex, regWrites);
1316
1317         /*
1318          * For 5GHz channels requiring Fast Clock, apply
1319          * different modal values.
1320          */
1321         if (IS_CHAN_A_FAST_CLOCK(ah, chan))
1322                 REG_WRITE_ARRAY(&ah->iniModesFastClock, modesIndex, regWrites);
1323
1324         REG_WRITE_ARRAY(&ah->iniAdditional, 1, regWrites);
1325
1326         ah->modes_index = modesIndex;
1327         *ini_reloaded = true;
1328
1329 set_rfmode:
1330         ar9003_hw_set_rfmode(ah, chan);
1331         return 0;
1332 }
1333
1334 void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
1335 {
1336         struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
1337         struct ath_hw_ops *ops = ath9k_hw_ops(ah);
1338         static const u32 ar9300_cca_regs[6] = {
1339                 AR_PHY_CCA_0,
1340                 AR_PHY_CCA_1,
1341                 AR_PHY_CCA_2,
1342                 AR_PHY_EXT_CCA,
1343                 AR_PHY_EXT_CCA_1,
1344                 AR_PHY_EXT_CCA_2,
1345         };
1346
1347         priv_ops->rf_set_freq = ar9003_hw_set_channel;
1348         priv_ops->spur_mitigate_freq = ar9003_hw_spur_mitigate;
1349         priv_ops->compute_pll_control = ar9003_hw_compute_pll_control;
1350         priv_ops->set_channel_regs = ar9003_hw_set_channel_regs;
1351         priv_ops->init_bb = ar9003_hw_init_bb;
1352         priv_ops->process_ini = ar9003_hw_process_ini;
1353         priv_ops->set_rfmode = ar9003_hw_set_rfmode;
1354         priv_ops->mark_phy_inactive = ar9003_hw_mark_phy_inactive;
1355         priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
1356         priv_ops->rfbus_req = ar9003_hw_rfbus_req;
1357         priv_ops->rfbus_done = ar9003_hw_rfbus_done;
1358         priv_ops->ani_control = ar9003_hw_ani_control;
1359         priv_ops->do_getnf = ar9003_hw_do_getnf;
1360         priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs;
1361         priv_ops->set_radar_params = ar9003_hw_set_radar_params;
1362         priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
1363
1364         ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get;
1365         ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set;
1366
1367         ar9003_hw_set_nf_limits(ah);
1368         ar9003_hw_set_radar_conf(ah);
1369         memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs));
1370 }
1371
1372 void ar9003_hw_bb_watchdog_config(struct ath_hw *ah)
1373 {
1374         struct ath_common *common = ath9k_hw_common(ah);
1375         u32 idle_tmo_ms = ah->bb_watchdog_timeout_ms;
1376         u32 val, idle_count;
1377
1378         if (!idle_tmo_ms) {
1379                 /* disable IRQ, disable chip-reset for BB panic */
1380                 REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
1381                           REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) &
1382                           ~(AR_PHY_WATCHDOG_RST_ENABLE |
1383                             AR_PHY_WATCHDOG_IRQ_ENABLE));
1384
1385                 /* disable watchdog in non-IDLE mode, disable in IDLE mode */
1386                 REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
1387                           REG_READ(ah, AR_PHY_WATCHDOG_CTL_1) &
1388                           ~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
1389                             AR_PHY_WATCHDOG_IDLE_ENABLE));
1390
1391                 ath_dbg(common, RESET, "Disabled BB Watchdog\n");
1392                 return;
1393         }
1394
1395         /* enable IRQ, disable chip-reset for BB watchdog */
1396         val = REG_READ(ah, AR_PHY_WATCHDOG_CTL_2) & AR_PHY_WATCHDOG_CNTL2_MASK;
1397         REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_2,
1398                   (val | AR_PHY_WATCHDOG_IRQ_ENABLE) &
1399                   ~AR_PHY_WATCHDOG_RST_ENABLE);
1400
1401         /* bound limit to 10 secs */
1402         if (idle_tmo_ms > 10000)
1403                 idle_tmo_ms = 10000;
1404
1405         /*
1406          * The time unit for watchdog event is 2^15 44/88MHz cycles.
1407          *
1408          * For HT20 we have a time unit of 2^15/44 MHz = .74 ms per tick
1409          * For HT40 we have a time unit of 2^15/88 MHz = .37 ms per tick
1410          *
1411          * Given we use fast clock now in 5 GHz, these time units should
1412          * be common for both 2 GHz and 5 GHz.
1413          */
1414         idle_count = (100 * idle_tmo_ms) / 74;
1415         if (ah->curchan && IS_CHAN_HT40(ah->curchan))
1416                 idle_count = (100 * idle_tmo_ms) / 37;
1417
1418         /*
1419          * enable watchdog in non-IDLE mode, disable in IDLE mode,
1420          * set idle time-out.
1421          */
1422         REG_WRITE(ah, AR_PHY_WATCHDOG_CTL_1,
1423                   AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
1424                   AR_PHY_WATCHDOG_IDLE_MASK |
1425                   (AR_PHY_WATCHDOG_NON_IDLE_MASK & (idle_count << 2)));
1426
1427         ath_dbg(common, RESET, "Enabled BB Watchdog timeout (%u ms)\n",
1428                 idle_tmo_ms);
1429 }
1430
1431 void ar9003_hw_bb_watchdog_read(struct ath_hw *ah)
1432 {
1433         /*
1434          * we want to avoid printing in ISR context so we save the
1435          * watchdog status to be printed later in bottom half context.
1436          */
1437         ah->bb_watchdog_last_status = REG_READ(ah, AR_PHY_WATCHDOG_STATUS);
1438
1439         /*
1440          * the watchdog timer should reset on status read but to be sure
1441          * sure we write 0 to the watchdog status bit.
1442          */
1443         REG_WRITE(ah, AR_PHY_WATCHDOG_STATUS,
1444                   ah->bb_watchdog_last_status & ~AR_PHY_WATCHDOG_STATUS_CLR);
1445 }
1446
1447 void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah)
1448 {
1449         struct ath_common *common = ath9k_hw_common(ah);
1450         u32 status;
1451
1452         if (likely(!(common->debug_mask & ATH_DBG_RESET)))
1453                 return;
1454
1455         status = ah->bb_watchdog_last_status;
1456         ath_dbg(common, RESET,
1457                 "\n==== BB update: BB status=0x%08x ====\n", status);
1458         ath_dbg(common, RESET,
1459                 "** BB state: wd=%u det=%u rdar=%u rOFDM=%d rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
1460                 MS(status, AR_PHY_WATCHDOG_INFO),
1461                 MS(status, AR_PHY_WATCHDOG_DET_HANG),
1462                 MS(status, AR_PHY_WATCHDOG_RADAR_SM),
1463                 MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM),
1464                 MS(status, AR_PHY_WATCHDOG_RX_CCK_SM),
1465                 MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM),
1466                 MS(status, AR_PHY_WATCHDOG_TX_CCK_SM),
1467                 MS(status, AR_PHY_WATCHDOG_AGC_SM),
1468                 MS(status, AR_PHY_WATCHDOG_SRCH_SM));
1469
1470         ath_dbg(common, RESET, "** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
1471                 REG_READ(ah, AR_PHY_WATCHDOG_CTL_1),
1472                 REG_READ(ah, AR_PHY_WATCHDOG_CTL_2));
1473         ath_dbg(common, RESET, "** BB mode: BB_gen_controls=0x%08x **\n",
1474                 REG_READ(ah, AR_PHY_GEN_CTRL));
1475
1476 #define PCT(_field) (common->cc_survey._field * 100 / common->cc_survey.cycles)
1477         if (common->cc_survey.cycles)
1478                 ath_dbg(common, RESET,
1479                         "** BB busy times: rx_clear=%d%%, rx_frame=%d%%, tx_frame=%d%% **\n",
1480                         PCT(rx_busy), PCT(rx_frame), PCT(tx_frame));
1481
1482         ath_dbg(common, RESET, "==== BB update: done ====\n\n");
1483 }
1484 EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info);
1485
1486 void ar9003_hw_disable_phy_restart(struct ath_hw *ah)
1487 {
1488         u32 val;
1489
1490         /* While receiving unsupported rate frame rx state machine
1491          * gets into a state 0xb and if phy_restart happens in that
1492          * state, BB would go hang. If RXSM is in 0xb state after
1493          * first bb panic, ensure to disable the phy_restart.
1494          */
1495         if (!((MS(ah->bb_watchdog_last_status,
1496                   AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) ||
1497             ah->bb_hang_rx_ofdm))
1498                 return;
1499
1500         ah->bb_hang_rx_ofdm = true;
1501         val = REG_READ(ah, AR_PHY_RESTART);
1502         val &= ~AR_PHY_RESTART_ENA;
1503
1504         REG_WRITE(ah, AR_PHY_RESTART, val);
1505 }
1506 EXPORT_SYMBOL(ar9003_hw_disable_phy_restart);