arch/arm/mach-omap2/board-4430sdp.c

   1 /*
   2  * Board support file for OMAP4430 SDP.
   3  *
   4  * Copyright (C) 2009 Texas Instruments
   5  *
   6  * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
   7  *
   8  * Based on mach-omap2/board-3430sdp.c
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/io.h>
  19 #include <linux/gpio.h>
  20 #include <linux/usb/otg.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/i2c/twl.h>
  23 #include <linux/mfd/twl6040.h>
  24 #include <linux/gpio_keys.h>
  25 #include <linux/regulator/machine.h>
  26 #include <linux/regulator/fixed.h>
  27 #include <linux/leds.h>
  28 #include <linux/leds_pwm.h>
  29 #include <linux/platform_data/omap4-keypad.h>
  30
  31 #include <mach/hardware.h>
  32 #include <asm/hardware/gic.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/mach/arch.h>
  35 #include <asm/mach/map.h>
  36
  37 #include <plat/board.h>
  38 #include "common.h"
  39 #include <plat/usb.h>
  40 #include <plat/mmc.h>
  41 #include <plat/omap4-keypad.h>
  42 #include <video/omapdss.h>
  43 #include <video/omap-panel-nokia-dsi.h>
  44 #include <video/omap-panel-picodlp.h>
  45 #include <linux/wl12xx.h>
  46 #include <linux/platform_data/omap-abe-twl6040.h>
  47
  48 #include "mux.h"
  49 #include "hsmmc.h"
  50 #include "control.h"
  51 #include "common-board-devices.h"
  52
  53 #define ETH_KS8851_IRQ                  34
  54 #define ETH_KS8851_POWER_ON             48
  55 #define ETH_KS8851_QUART                138
  56 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO        184
  57 #define OMAP4_SFH7741_ENABLE_GPIO               188
  58 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
  59 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
  60 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
  61 #define DISPLAY_SEL_GPIO        59      /* LCD2/PicoDLP switch */
  62 #define DLP_POWER_ON_GPIO       40
  63
  64 #define GPIO_WIFI_PMENA         54
  65 #define GPIO_WIFI_IRQ           53
  66
  67 static const int sdp4430_keymap[] = {
  68         KEY(0, 0, KEY_E),
  69         KEY(0, 1, KEY_R),
  70         KEY(0, 2, KEY_T),
  71         KEY(0, 3, KEY_HOME),
  72         KEY(0, 4, KEY_F5),
  73         KEY(0, 5, KEY_UNKNOWN),
  74         KEY(0, 6, KEY_I),
  75         KEY(0, 7, KEY_LEFTSHIFT),
  76
  77         KEY(1, 0, KEY_D),
  78         KEY(1, 1, KEY_F),
  79         KEY(1, 2, KEY_G),
  80         KEY(1, 3, KEY_SEND),
  81         KEY(1, 4, KEY_F6),
  82         KEY(1, 5, KEY_UNKNOWN),
  83         KEY(1, 6, KEY_K),
  84         KEY(1, 7, KEY_ENTER),
  85
  86         KEY(2, 0, KEY_X),
  87         KEY(2, 1, KEY_C),
  88         KEY(2, 2, KEY_V),
  89         KEY(2, 3, KEY_END),
  90         KEY(2, 4, KEY_F7),
  91         KEY(2, 5, KEY_UNKNOWN),
  92         KEY(2, 6, KEY_DOT),
  93         KEY(2, 7, KEY_CAPSLOCK),
  94
  95         KEY(3, 0, KEY_Z),
  96         KEY(3, 1, KEY_KPPLUS),
  97         KEY(3, 2, KEY_B),
  98         KEY(3, 3, KEY_F1),
  99         KEY(3, 4, KEY_F8),
 100         KEY(3, 5, KEY_UNKNOWN),
 101         KEY(3, 6, KEY_O),
 102         KEY(3, 7, KEY_SPACE),
 103
 104         KEY(4, 0, KEY_W),
 105         KEY(4, 1, KEY_Y),
 106         KEY(4, 2, KEY_U),
 107         KEY(4, 3, KEY_F2),
 108         KEY(4, 4, KEY_VOLUMEUP),
 109         KEY(4, 5, KEY_UNKNOWN),
 110         KEY(4, 6, KEY_L),
 111         KEY(4, 7, KEY_LEFT),
 112
 113         KEY(5, 0, KEY_S),
 114         KEY(5, 1, KEY_H),
 115         KEY(5, 2, KEY_J),
 116         KEY(5, 3, KEY_F3),
 117         KEY(5, 4, KEY_F9),
 118         KEY(5, 5, KEY_VOLUMEDOWN),
 119         KEY(5, 6, KEY_M),
 120         KEY(5, 7, KEY_RIGHT),
 121
 122         KEY(6, 0, KEY_Q),
 123         KEY(6, 1, KEY_A),
 124         KEY(6, 2, KEY_N),
 125         KEY(6, 3, KEY_BACK),
 126         KEY(6, 4, KEY_BACKSPACE),
 127         KEY(6, 5, KEY_UNKNOWN),
 128         KEY(6, 6, KEY_P),
 129         KEY(6, 7, KEY_UP),
 130
 131         KEY(7, 0, KEY_PROG1),
 132         KEY(7, 1, KEY_PROG2),
 133         KEY(7, 2, KEY_PROG3),
 134         KEY(7, 3, KEY_PROG4),
 135         KEY(7, 4, KEY_F4),
 136         KEY(7, 5, KEY_UNKNOWN),
 137         KEY(7, 6, KEY_OK),
 138         KEY(7, 7, KEY_DOWN),
 139 };
 140 static struct omap_device_pad keypad_pads[] = {
 141         {       .name   = "kpd_col1.kpd_col1",
 142                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 143         },
 144         {       .name   = "kpd_col1.kpd_col1",
 145                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 146         },
 147         {       .name   = "kpd_col2.kpd_col2",
 148                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 149         },
 150         {       .name   = "kpd_col3.kpd_col3",
 151                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 152         },
 153         {       .name   = "kpd_col4.kpd_col4",
 154                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 155         },
 156         {       .name   = "kpd_col5.kpd_col5",
 157                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 158         },
 159         {       .name   = "gpmc_a23.kpd_col7",
 160                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 161         },
 162         {       .name   = "gpmc_a22.kpd_col6",
 163                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 164         },
 165         {       .name   = "kpd_row0.kpd_row0",
 166                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 167                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 168         },
 169         {       .name   = "kpd_row1.kpd_row1",
 170                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 171                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 172         },
 173         {       .name   = "kpd_row2.kpd_row2",
 174                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 175                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 176         },
 177         {       .name   = "kpd_row3.kpd_row3",
 178                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 179                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 180         },
 181         {       .name   = "kpd_row4.kpd_row4",
 182                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 183                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 184         },
 185         {       .name   = "kpd_row5.kpd_row5",
 186                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 187                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 188         },
 189         {       .name   = "gpmc_a18.kpd_row6",
 190                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 191                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 192         },
 193         {       .name   = "gpmc_a19.kpd_row7",
 194                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 195                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 196         },
 197 };
 198
 199 static struct matrix_keymap_data sdp4430_keymap_data = {
 200         .keymap                 = sdp4430_keymap,
 201         .keymap_size            = ARRAY_SIZE(sdp4430_keymap),
 202 };
 203
 204 static struct omap4_keypad_platform_data sdp4430_keypad_data = {
 205         .keymap_data            = &sdp4430_keymap_data,
 206         .rows                   = 8,
 207         .cols                   = 8,
 208 };
 209
 210 static struct omap_board_data keypad_data = {
 211         .id                     = 1,
 212         .pads                   = keypad_pads,
 213         .pads_cnt               = ARRAY_SIZE(keypad_pads),
 214 };
 215
 216 static struct gpio_led sdp4430_gpio_leds[] = {
 217         {
 218                 .name   = "omap4:green:debug0",
 219                 .gpio   = 61,
 220         },
 221         {
 222                 .name   = "omap4:green:debug1",
 223                 .gpio   = 30,
 224         },
 225         {
 226                 .name   = "omap4:green:debug2",
 227                 .gpio   = 7,
 228         },
 229         {
 230                 .name   = "omap4:green:debug3",
 231                 .gpio   = 8,
 232         },
 233         {
 234                 .name   = "omap4:green:debug4",
 235                 .gpio   = 50,
 236         },
 237         {
 238                 .name   = "omap4:blue:user",
 239                 .gpio   = 169,
 240         },
 241         {
 242                 .name   = "omap4:red:user",
 243                 .gpio   = 170,
 244         },
 245         {
 246                 .name   = "omap4:green:user",
 247                 .gpio   = 139,
 248         },
 249
 250 };
 251
 252 static struct gpio_keys_button sdp4430_gpio_keys[] = {
 253         {
 254                 .desc                   = "Proximity Sensor",
 255                 .type                   = EV_SW,
 256                 .code                   = SW_FRONT_PROXIMITY,
 257                 .gpio                   = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
 258                 .active_low             = 0,
 259         }
 260 };
 261
 262 static struct gpio_led_platform_data sdp4430_led_data = {
 263         .leds   = sdp4430_gpio_leds,
 264         .num_leds       = ARRAY_SIZE(sdp4430_gpio_leds),
 265 };
 266
 267 static struct led_pwm sdp4430_pwm_leds[] = {
 268         {
 269                 .name           = "omap4:green:chrg",
 270                 .pwm_id         = 1,
 271                 .max_brightness = 255,
 272                 .pwm_period_ns  = 7812500,
 273         },
 274 };
 275
 276 static struct led_pwm_platform_data sdp4430_pwm_data = {
 277         .num_leds       = ARRAY_SIZE(sdp4430_pwm_leds),
 278         .leds           = sdp4430_pwm_leds,
 279 };
 280
 281 static struct platform_device sdp4430_leds_pwm = {
 282         .name   = "leds_pwm",
 283         .id     = -1,
 284         .dev    = {
 285                 .platform_data = &sdp4430_pwm_data,
 286         },
 287 };
 288
 289 static int omap_prox_activate(struct device *dev)
 290 {
 291         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
 292         return 0;
 293 }
 294
 295 static void omap_prox_deactivate(struct device *dev)
 296 {
 297         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
 298 }
 299
 300 static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
 301         .buttons        = sdp4430_gpio_keys,
 302         .nbuttons       = ARRAY_SIZE(sdp4430_gpio_keys),
 303         .enable         = omap_prox_activate,
 304         .disable        = omap_prox_deactivate,
 305 };
 306
 307 static struct platform_device sdp4430_gpio_keys_device = {
 308         .name   = "gpio-keys",
 309         .id     = -1,
 310         .dev    = {
 311                 .platform_data  = &sdp4430_gpio_keys_data,
 312         },
 313 };
 314
 315 static struct platform_device sdp4430_leds_gpio = {
 316         .name   = "leds-gpio",
 317         .id     = -1,
 318         .dev    = {
 319                 .platform_data = &sdp4430_led_data,
 320         },
 321 };
 322 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 323         {
 324                 .modalias               = "ks8851",
 325                 .bus_num                = 1,
 326                 .chip_select            = 0,
 327                 .max_speed_hz           = 24000000,
 328                 /*
 329                  * .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
 330                  * in omap_4430sdp_init
 331                  */
 332         },
 333 };
 334
 335 static struct gpio sdp4430_eth_gpios[] __initdata = {
 336         { ETH_KS8851_POWER_ON,  GPIOF_OUT_INIT_HIGH,    "eth_power"     },
 337         { ETH_KS8851_QUART,     GPIOF_OUT_INIT_HIGH,    "quart"         },
 338         { ETH_KS8851_IRQ,       GPIOF_IN,               "eth_irq"       },
 339 };
 340
 341 static int __init omap_ethernet_init(void)
 342 {
 343         int status;
 344
 345         /* Request of GPIO lines */
 346         status = gpio_request_array(sdp4430_eth_gpios,
 347                                     ARRAY_SIZE(sdp4430_eth_gpios));
 348         if (status)
 349                 pr_err("Cannot request ETH GPIOs\n");
 350
 351         return status;
 352 }
 353
 354 static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
 355         REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
 356         REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
 357 };
 358
 359 static struct regulator_init_data sdp4430_vbat_data = {
 360         .constraints = {
 361                 .always_on      = 1,
 362         },
 363         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vbat_supply),
 364         .consumer_supplies      = sdp4430_vbat_supply,
 365 };
 366
 367 static struct fixed_voltage_config sdp4430_vbat_pdata = {
 368         .supply_name    = "VBAT",
 369         .microvolts     = 3750000,
 370         .init_data      = &sdp4430_vbat_data,
 371         .gpio           = -EINVAL,
 372 };
 373
 374 static struct platform_device sdp4430_vbat = {
 375         .name           = "reg-fixed-voltage",
 376         .id             = -1,
 377         .dev = {
 378                 .platform_data = &sdp4430_vbat_pdata,
 379         },
 380 };
 381
 382 static struct platform_device sdp4430_dmic_codec = {
 383         .name   = "dmic-codec",
 384         .id     = -1,
 385 };
 386
 387 static struct omap_abe_twl6040_data sdp4430_abe_audio_data = {
 388         .card_name = "SDP4430",
 389         .has_hs         = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 390         .has_hf         = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 391         .has_ep         = 1,
 392         .has_aux        = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 393         .has_vibra      = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 394
 395         .has_dmic       = 1,
 396         .has_hsmic      = 1,
 397         .has_mainmic    = 1,
 398         .has_submic     = 1,
 399         .has_afm        = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT,
 400
 401         .jack_detection = 1,
 402         /* MCLK input is 38.4MHz */
 403         .mclk_freq      = 38400000,
 404 };
 405
 406 static struct platform_device sdp4430_abe_audio = {
 407         .name           = "omap-abe-twl6040",
 408         .id             = -1,
 409         .dev = {
 410                 .platform_data = &sdp4430_abe_audio_data,
 411         },
 412 };
 413
 414 static struct platform_device *sdp4430_devices[] __initdata = {
 415         &sdp4430_gpio_keys_device,
 416         &sdp4430_leds_gpio,
 417         &sdp4430_leds_pwm,
 418         &sdp4430_vbat,
 419         &sdp4430_dmic_codec,
 420         &sdp4430_abe_audio,
 421 };
 422
 423 static struct omap_musb_board_data musb_board_data = {
 424         .interface_type         = MUSB_INTERFACE_UTMI,
 425         .mode                   = MUSB_OTG,
 426         .power                  = 100,
 427 };
 428
 429 static struct omap2_hsmmc_info mmc[] = {
 430         {
 431                 .mmc            = 2,
 432                 .caps           =  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 433                 .gpio_cd        = -EINVAL,
 434                 .gpio_wp        = -EINVAL,
 435                 .nonremovable   = true,
 436                 .ocr_mask       = MMC_VDD_29_30,
 437                 .no_off_init    = true,
 438         },
 439         {
 440                 .mmc            = 1,
 441                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 442                 .gpio_cd        = -EINVAL,
 443                 .gpio_wp        = -EINVAL,
 444         },
 445         {
 446                 .mmc            = 5,
 447                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 448                 .pm_caps        = MMC_PM_KEEP_POWER,
 449                 .gpio_cd        = -EINVAL,
 450                 .gpio_wp        = -EINVAL,
 451                 .ocr_mask       = MMC_VDD_165_195,
 452                 .nonremovable   = true,
 453         },
 454         {}      /* Terminator */
 455 };
 456
 457 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 458         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 459 };
 460
 461 static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
 462         .supply = "vmmc",
 463         .dev_name = "omap_hsmmc.4",
 464 };
 465
 466 static struct regulator_init_data sdp4430_vmmc5 = {
 467         .constraints = {
 468                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 469         },
 470         .num_consumer_supplies = 1,
 471         .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
 472 };
 473
 474 static struct fixed_voltage_config sdp4430_vwlan = {
 475         .supply_name            = "vwl1271",
 476         .microvolts             = 1800000, /* 1.8V */
 477         .gpio                   = GPIO_WIFI_PMENA,
 478         .startup_delay          = 70000, /* 70msec */
 479         .enable_high            = 1,
 480         .enabled_at_boot        = 0,
 481         .init_data              = &sdp4430_vmmc5,
 482 };
 483
 484 static struct platform_device omap_vwlan_device = {
 485         .name           = "reg-fixed-voltage",
 486         .id             = 1,
 487         .dev = {
 488                 .platform_data = &sdp4430_vwlan,
 489         },
 490 };
 491
 492 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 493 {
 494         int irq = 0;
 495         struct platform_device *pdev = container_of(dev,
 496                                 struct platform_device, dev);
 497         struct omap_mmc_platform_data *pdata = dev->platform_data;
 498
 499         /* Setting MMC1 Card detect Irq */
 500         if (pdev->id == 0) {
 501                 irq = twl6030_mmc_card_detect_config();
 502                 if (irq < 0) {
 503                         pr_err("Failed configuring MMC1 card detect\n");
 504                         return irq;
 505                 }
 506                 pdata->slots[0].card_detect_irq = irq;
 507                 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 508         }
 509         return 0;
 510 }
 511
 512 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
 513 {
 514         struct omap_mmc_platform_data *pdata;
 515
 516         /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
 517         if (!dev) {
 518                 pr_err("Failed %s\n", __func__);
 519                 return;
 520         }
 521         pdata = dev->platform_data;
 522         pdata->init =   omap4_twl6030_hsmmc_late_init;
 523 }
 524
 525 static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 526 {
 527         struct omap2_hsmmc_info *c;
 528
 529         omap_hsmmc_init(controllers);
 530         for (c = controllers; c->mmc; c++)
 531                 omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 532
 533         return 0;
 534 }
 535
 536 static struct regulator_init_data sdp4430_vaux1 = {
 537         .constraints = {
 538                 .min_uV                 = 1000000,
 539                 .max_uV                 = 3000000,
 540                 .apply_uV               = true,
 541                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 542                                         | REGULATOR_MODE_STANDBY,
 543                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 544                                         | REGULATOR_CHANGE_MODE
 545                                         | REGULATOR_CHANGE_STATUS,
 546         },
 547         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 548         .consumer_supplies      = sdp4430_vaux_supply,
 549 };
 550
 551 static struct regulator_init_data sdp4430_vusim = {
 552         .constraints = {
 553                 .min_uV                 = 1200000,
 554                 .max_uV                 = 2900000,
 555                 .apply_uV               = true,
 556                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 557                                         | REGULATOR_MODE_STANDBY,
 558                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 559                                         | REGULATOR_CHANGE_MODE
 560                                         | REGULATOR_CHANGE_STATUS,
 561         },
 562 };
 563
 564 static struct twl6040_codec_data twl6040_codec = {
 565         /* single-step ramp for headset and handsfree */
 566         .hs_left_step   = 0x0f,
 567         .hs_right_step  = 0x0f,
 568         .hf_left_step   = 0x1d,
 569         .hf_right_step  = 0x1d,
 570 };
 571
 572 static struct twl6040_vibra_data twl6040_vibra = {
 573         .vibldrv_res = 8,
 574         .vibrdrv_res = 3,
 575         .viblmotor_res = 10,
 576         .vibrmotor_res = 10,
 577         .vddvibl_uV = 0,        /* fixed volt supply - VBAT */
 578         .vddvibr_uV = 0,        /* fixed volt supply - VBAT */
 579 };
 580
 581 static struct twl6040_platform_data twl6040_data = {
 582         .codec          = &twl6040_codec,
 583         .vibra          = &twl6040_vibra,
 584         .audpwron_gpio  = 127,
 585         .irq_base       = TWL6040_CODEC_IRQ_BASE,
 586 };
 587
 588 static struct twl4030_platform_data sdp4430_twldata = {
 589         /* Regulators */
 590         .vusim          = &sdp4430_vusim,
 591         .vaux1          = &sdp4430_vaux1,
 592 };
 593
 594 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
 595         {
 596                 I2C_BOARD_INFO("tmp105", 0x48),
 597         },
 598         {
 599                 I2C_BOARD_INFO("bh1780", 0x29),
 600         },
 601 };
 602 static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 603         {
 604                 I2C_BOARD_INFO("hmc5843", 0x1e),
 605         },
 606 };
 607 static int __init omap4_i2c_init(void)
 608 {
 609         omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
 610                         TWL_COMMON_REGULATOR_VDAC |
 611                         TWL_COMMON_REGULATOR_VAUX2 |
 612                         TWL_COMMON_REGULATOR_VAUX3 |
 613                         TWL_COMMON_REGULATOR_VMMC |
 614                         TWL_COMMON_REGULATOR_VPP |
 615                         TWL_COMMON_REGULATOR_VANA |
 616                         TWL_COMMON_REGULATOR_VCXIO |
 617                         TWL_COMMON_REGULATOR_VUSB |
 618                         TWL_COMMON_REGULATOR_CLK32KG);
 619         omap4_pmic_init("twl6030", &sdp4430_twldata,
 620                         &twl6040_data, OMAP44XX_IRQ_SYS_2N);
 621         omap_register_i2c_bus(2, 400, NULL, 0);
 622         omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 623                                 ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
 624         omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
 625                                 ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
 626         return 0;
 627 }
 628
 629 static void __init omap_sfh7741prox_init(void)
 630 {
 631         int error;
 632
 633         error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
 634                                  GPIOF_OUT_INIT_LOW, "sfh7741");
 635         if (error < 0)
 636                 pr_err("%s:failed to request GPIO %d, error %d\n",
 637                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 638 }
 639
 640 static struct gpio sdp4430_hdmi_gpios[] = {
 641         { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 642         { HDMI_GPIO_LS_OE,      GPIOF_OUT_INIT_HIGH,    "hdmi_gpio_ls_oe" },
 643         { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
 644 };
 645
 646 static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
 647 {
 648         int status;
 649
 650         status = gpio_request_array(sdp4430_hdmi_gpios,
 651                                     ARRAY_SIZE(sdp4430_hdmi_gpios));
 652         if (status)
 653                 pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
 654
 655         return status;
 656 }
 657
 658 static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 659 {
 660         gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
 661 }
 662
 663 static struct nokia_dsi_panel_data dsi1_panel = {
 664                 .name           = "taal",
 665                 .reset_gpio     = 102,
 666                 .use_ext_te     = false,
 667                 .ext_te_gpio    = 101,
 668                 .esd_interval   = 0,
 669 };
 670
 671 static struct omap_dss_device sdp4430_lcd_device = {
 672         .name                   = "lcd",
 673         .driver_name            = "taal",
 674         .type                   = OMAP_DISPLAY_TYPE_DSI,
 675         .data                   = &dsi1_panel,
 676         .phy.dsi                = {
 677                 .clk_lane       = 1,
 678                 .clk_pol        = 0,
 679                 .data1_lane     = 2,
 680                 .data1_pol      = 0,
 681                 .data2_lane     = 3,
 682                 .data2_pol      = 0,
 683
 684                 .module         = 0,
 685         },
 686
 687         .clocks = {
 688                 .dispc = {
 689                         .channel = {
 690                                 /* Logic Clock = 172.8 MHz */
 691                                 .lck_div        = 1,
 692                                 /* Pixel Clock = 34.56 MHz */
 693                                 .pck_div        = 5,
 694                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
 695                         },
 696                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 697                 },
 698
 699                 .dsi = {
 700                         .regn           = 16,   /* Fint = 2.4 MHz */
 701                         .regm           = 180,  /* DDR Clock = 216 MHz */
 702                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 703                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 704
 705                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 706                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
 707                 },
 708         },
 709         .channel                = OMAP_DSS_CHANNEL_LCD,
 710 };
 711
 712 static struct nokia_dsi_panel_data dsi2_panel = {
 713                 .name           = "taal",
 714                 .reset_gpio     = 104,
 715                 .use_ext_te     = false,
 716                 .ext_te_gpio    = 103,
 717                 .esd_interval   = 0,
 718 };
 719
 720 static struct omap_dss_device sdp4430_lcd2_device = {
 721         .name                   = "lcd2",
 722         .driver_name            = "taal",
 723         .type                   = OMAP_DISPLAY_TYPE_DSI,
 724         .data                   = &dsi2_panel,
 725         .phy.dsi                = {
 726                 .clk_lane       = 1,
 727                 .clk_pol        = 0,
 728                 .data1_lane     = 2,
 729                 .data1_pol      = 0,
 730                 .data2_lane     = 3,
 731                 .data2_pol      = 0,
 732
 733                 .module         = 1,
 734         },
 735
 736         .clocks = {
 737                 .dispc = {
 738                         .channel = {
 739                                 /* Logic Clock = 172.8 MHz */
 740                                 .lck_div        = 1,
 741                                 /* Pixel Clock = 34.56 MHz */
 742                                 .pck_div        = 5,
 743                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
 744                         },
 745                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 746                 },
 747
 748                 .dsi = {
 749                         .regn           = 16,   /* Fint = 2.4 MHz */
 750                         .regm           = 180,  /* DDR Clock = 216 MHz */
 751                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 752                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 753
 754                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 755                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
 756                 },
 757         },
 758         .channel                = OMAP_DSS_CHANNEL_LCD2,
 759 };
 760
 761 static void sdp4430_lcd_init(void)
 762 {
 763         int r;
 764
 765         r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
 766                 "lcd1_reset_gpio");
 767         if (r)
 768                 pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
 769
 770         r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
 771                 "lcd2_reset_gpio");
 772         if (r)
 773                 pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
 774 }
 775
 776 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
 777         .hpd_gpio = HDMI_GPIO_HPD,
 778 };
 779
 780 static struct omap_dss_device sdp4430_hdmi_device = {
 781         .name = "hdmi",
 782         .driver_name = "hdmi_panel",
 783         .type = OMAP_DISPLAY_TYPE_HDMI,
 784         .platform_enable = sdp4430_panel_enable_hdmi,
 785         .platform_disable = sdp4430_panel_disable_hdmi,
 786         .channel = OMAP_DSS_CHANNEL_DIGIT,
 787         .data = &sdp4430_hdmi_data,
 788 };
 789
 790 static struct picodlp_panel_data sdp4430_picodlp_pdata = {
 791         .picodlp_adapter_id     = 2,
 792         .emu_done_gpio          = 44,
 793         .pwrgood_gpio           = 45,
 794 };
 795
 796 static void sdp4430_picodlp_init(void)
 797 {
 798         int r;
 799         const struct gpio picodlp_gpios[] = {
 800                 {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
 801                         "DLP POWER ON"},
 802                 {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
 803                         "DLP EMU DONE"},
 804                 {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
 805                         "DLP PWRGOOD"},
 806         };
 807
 808         r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
 809         if (r)
 810                 pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
 811 }
 812
 813 static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
 814 {
 815         gpio_set_value(DISPLAY_SEL_GPIO, 0);
 816         gpio_set_value(DLP_POWER_ON_GPIO, 1);
 817
 818         return 0;
 819 }
 820
 821 static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
 822 {
 823         gpio_set_value(DLP_POWER_ON_GPIO, 0);
 824         gpio_set_value(DISPLAY_SEL_GPIO, 1);
 825 }
 826
 827 static struct omap_dss_device sdp4430_picodlp_device = {
 828         .name                   = "picodlp",
 829         .driver_name            = "picodlp_panel",
 830         .type                   = OMAP_DISPLAY_TYPE_DPI,
 831         .phy.dpi.data_lines     = 24,
 832         .channel                = OMAP_DSS_CHANNEL_LCD2,
 833         .platform_enable        = sdp4430_panel_enable_picodlp,
 834         .platform_disable       = sdp4430_panel_disable_picodlp,
 835         .data                   = &sdp4430_picodlp_pdata,
 836 };
 837
 838 static struct omap_dss_device *sdp4430_dss_devices[] = {
 839         &sdp4430_lcd_device,
 840         &sdp4430_lcd2_device,
 841         &sdp4430_hdmi_device,
 842         &sdp4430_picodlp_device,
 843 };
 844
 845 static struct omap_dss_board_info sdp4430_dss_data = {
 846         .num_devices    = ARRAY_SIZE(sdp4430_dss_devices),
 847         .devices        = sdp4430_dss_devices,
 848         .default_device = &sdp4430_lcd_device,
 849 };
 850
 851 static void __init omap_4430sdp_display_init(void)
 852 {
 853         int r;
 854
 855         /* Enable LCD2 by default (instead of Pico DLP) */
 856         r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 857                         "display_sel");
 858         if (r)
 859                 pr_err("%s: Could not get display_sel GPIO\n", __func__);
 860
 861         sdp4430_lcd_init();
 862         sdp4430_picodlp_init();
 863         omap_display_init(&sdp4430_dss_data);
 864         /*
 865          * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
 866          * later have external pull up on the HDMI I2C lines
 867          */
 868         if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
 869                 omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
 870         else
 871                 omap_hdmi_init(0);
 872
 873         omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
 874         omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
 875         omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 876 }
 877
 878 #ifdef CONFIG_OMAP_MUX
 879 static struct omap_board_mux board_mux[] __initdata = {
 880         OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 881         { .reg_offset = OMAP_MUX_TERMINATOR },
 882 };
 883
 884 #else
 885 #define board_mux       NULL
 886  #endif
 887
 888 static void __init omap4_sdp4430_wifi_mux_init(void)
 889 {
 890         omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
 891                                 OMAP_PIN_OFF_WAKEUPENABLE);
 892         omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
 893
 894         omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
 895                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 896         omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
 897                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 898         omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
 899                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 900         omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
 901                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 902         omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
 903                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 904         omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
 905                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 906
 907 }
 908
 909 static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
 910         .board_ref_clock = WL12XX_REFCLOCK_26,
 911         .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
 912 };
 913
 914 static void __init omap4_sdp4430_wifi_init(void)
 915 {
 916         int ret;
 917
 918         omap4_sdp4430_wifi_mux_init();
 919         omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
 920         ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
 921         if (ret)
 922                 pr_err("Error setting wl12xx data: %d\n", ret);
 923         ret = platform_device_register(&omap_vwlan_device);
 924         if (ret)
 925                 pr_err("Error registering wl12xx device: %d\n", ret);
 926 }
 927
 928 static void __init omap_4430sdp_init(void)
 929 {
 930         int status;
 931         int package = OMAP_PACKAGE_CBS;
 932
 933         if (omap_rev() == OMAP4430_REV_ES1_0)
 934                 package = OMAP_PACKAGE_CBL;
 935         omap4_mux_init(board_mux, NULL, package);
 936
 937         omap4_i2c_init();
 938         omap_sfh7741prox_init();
 939         platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 940         omap_serial_init();
 941         omap_sdrc_init(NULL, NULL);
 942         omap4_sdp4430_wifi_init();
 943         omap4_twl6030_hsmmc_init(mmc);
 944
 945         usb_musb_init(&musb_board_data);
 946
 947         status = omap_ethernet_init();
 948         if (status) {
 949                 pr_err("Ethernet initialization failed: %d\n", status);
 950         } else {
 951                 sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
 952                 spi_register_board_info(sdp4430_spi_board_info,
 953                                 ARRAY_SIZE(sdp4430_spi_board_info));
 954         }
 955
 956         status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
 957         if (status)
 958                 pr_err("Keypad initialization failed: %d\n", status);
 959
 960         omap_4430sdp_display_init();
 961 }
 962
 963 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 964         /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 965         .atag_offset    = 0x100,
 966         .reserve        = omap_reserve,
 967         .map_io         = omap4_map_io,
 968         .init_early     = omap4430_init_early,
 969         .init_irq       = gic_init_irq,
 970         .handle_irq     = gic_handle_irq,
 971         .init_machine   = omap_4430sdp_init,
 972         .timer          = &omap4_timer,
 973         .restart        = omap_prcm_restart,
 974 MACHINE_END