Import changeset
[linux-flexiantxendom0-3.2.10.git] / drivers / sbus / char / pcikbd.h
1 /* $Id: pcikbd.h,v 1.2 1997/12/25 21:13:14 geert Exp $
2  * pcikbd.h: PCI/PC 8042 keyboard/mouse driver stuff.  Mostly snarfed
3  *           from the existing driver by Martin Mares.
4  *
5  * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
6  *
7  * Ultra/AX specific hacks are:
8  *
9  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
10  */
11
12 #ifndef __PCIKBD_H
13 #define __PCIKBD_H
14
15 /*
16  *      Configuration Switches
17  */
18
19 #define KBD_REPORT_ERR                  /* Report keyboard errors */
20 #define KBD_REPORT_UNKN                 /* Report unknown scan codes */
21 #define KBD_REPORT_TIMEOUTS             /* Report keyboard timeouts */
22
23 #define KBD_INIT_TIMEOUT HZ             /* Timeout for initializing the keyboard */
24 #define KBC_TIMEOUT (HZ/4)              /* Timeout for sending to keyboard controller */
25 #define KBD_TIMEOUT (HZ/4)              /* Timeout for keyboard command acknowledge */
26
27 /*
28  *      Internal variables of the driver
29  */
30
31 extern unsigned char pckbd_read_mask;
32 extern unsigned char aux_device_present;
33
34 extern unsigned long pcikbd_iobase;
35 extern unsigned int pcikbd_irq;
36
37 /*
38  *      Keyboard Controller Registers
39  *
40  * NOTE: These are offsets from pcikbd_iobase, not absolute.
41  */
42
43 #define KBD_STATUS_REG          0x04
44 #define KBD_CNTL_REG            KBD_STATUS_REG
45 #define KBD_DATA_REG            0x00
46
47 /*
48  *      Keyboard Controller Commands
49  */
50
51 #define KBD_CCMD_READ_MODE      0x20    /* Read mode bits */
52 #define KBD_CCMD_WRITE_MODE     0x60    /* Write mode bits */
53 #define KBD_CCMD_GET_VERSION    0xA1    /* Get controller version */
54 #define KBD_CCMD_MOUSE_DISABLE  0xA7    /* Disable mouse interface */
55 #define KBD_CCMD_MOUSE_ENABLE   0xA8    /* Enable mouse interface */
56 #define KBD_CCMD_TEST_MOUSE     0xA9    /* Mouse interface test */
57 #define KBD_CCMD_SELF_TEST      0xAA    /* Controller self test */
58 #define KBD_CCMD_KBD_TEST       0xAB    /* Keyboard interface test */
59 #define KBD_CCMD_KBD_DISABLE    0xAD    /* Keyboard interface disable */
60 #define KBD_CCMD_KBD_ENABLE     0xAE    /* Keyboard interface enable */
61 #define KBD_CCMD_WRITE_MOUSE    0xD4    /* Write the following byte to the mouse */
62
63 /*
64  *      Keyboard Commands
65  */
66
67 #define KBD_CMD_SET_LEDS        0xED    /* Set keyboard leds */
68 #define KBD_CMD_SET_RATE        0xF3    /* Set typematic rate */
69 #define KBD_CMD_ENABLE          0xF4    /* Enable scanning */
70 #define KBD_CMD_DISABLE         0xF5    /* Disable scanning */
71 #define KBD_CMD_RESET           0xFF    /* Reset */
72
73 /*
74  *      Keyboard Replies
75  */
76
77 #define KBD_REPLY_POR           0xAA    /* Power on reset */
78 #define KBD_REPLY_ACK           0xFA    /* Command ACK */
79 #define KBD_REPLY_RESEND        0xFE    /* Command NACK, send the cmd again */
80
81 /*
82  *      Status Register Bits
83  */
84
85 #define KBD_STAT_OBF            0x01    /* Keyboard output buffer full */
86 #define KBD_STAT_IBF            0x02    /* Keyboard input buffer full */
87 #define KBD_STAT_SELFTEST       0x04    /* Self test successful */
88 #define KBD_STAT_CMD            0x08    /* Last write was a command write (0=data) */
89 #define KBD_STAT_UNLOCKED       0x10    /* Zero if keyboard locked */
90 #define KBD_STAT_MOUSE_OBF      0x20    /* Mouse output buffer full */
91 #define KBD_STAT_GTO            0x40    /* General receive/xmit timeout */
92 #define KBD_STAT_PERR           0x80    /* Parity error */
93
94 #define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
95
96 /*
97  *      Controller Mode Register Bits
98  */
99
100 #define KBD_MODE_KBD_INT        0x01    /* Keyboard data generage IRQ1 */
101 #define KBD_MODE_MOUSE_INT      0x02    /* Mouse data generate IRQ12 */
102 #define KBD_MODE_SYS            0x04    /* The system flag (?) */
103 #define KBD_MODE_NO_KEYLOCK     0x08    /* The keylock doesn't affect the keyboard if set */
104 #define KBD_MODE_DISABLE_KBD    0x10    /* Disable keyboard interface */
105 #define KBD_MODE_DISABLE_MOUSE  0x20    /* Disable mouse interface */
106 #define KBD_MODE_KCC            0x40    /* Scan code conversion to PC format */
107 #define KBD_MODE_RFU            0x80
108
109 /*
110  *      Mouse Commands
111  */
112
113 #define AUX_SET_RES             0xE8    /* Set resolution */
114 #define AUX_SET_SCALE11         0xE6    /* Set 1:1 scaling */
115 #define AUX_SET_SCALE21         0xE7    /* Set 2:1 scaling */
116 #define AUX_GET_SCALE           0xE9    /* Get scaling factor */
117 #define AUX_SET_STREAM          0xEA    /* Set stream mode */
118 #define AUX_SET_SAMPLE          0xF3    /* Set sample rate */
119 #define AUX_ENABLE_DEV          0xF4    /* Enable aux device */
120 #define AUX_DISABLE_DEV         0xF5    /* Disable aux device */
121 #define AUX_RESET               0xFF    /* Reset aux device */
122
123 #endif /* __PCIKBD_H */