drivers/tty/synclinkmp.c

   1 /*
   2  * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
   3  *
   4  * Device driver for Microgate SyncLink Multiport
   5  * high speed multiprotocol serial adapter.
   6  *
   7  * written by Paul Fulghum for Microgate Corporation
   8  * paulkf@microgate.com
   9  *
  10  * Microgate and SyncLink are trademarks of Microgate Corporation
  11  *
  12  * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
  13  * This code is released under the GNU General Public License (GPL)
  14  *
  15  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  16  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  18  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  19  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  20  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  21  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  23  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  24  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  25  * OF THE POSSIBILITY OF SUCH DAMAGE.
  26  */
  27
  28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  29 #if defined(__i386__)
  30 #  define BREAKPOINT() asm("   int $3");
  31 #else
  32 #  define BREAKPOINT() { }
  33 #endif
  34
  35 #define MAX_DEVICES 12
  36
  37 #include <linux/module.h>
  38 #include <linux/errno.h>
  39 #include <linux/signal.h>
  40 #include <linux/sched.h>
  41 #include <linux/timer.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/pci.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_flip.h>
  46 #include <linux/serial.h>
  47 #include <linux/major.h>
  48 #include <linux/string.h>
  49 #include <linux/fcntl.h>
  50 #include <linux/ptrace.h>
  51 #include <linux/ioport.h>
  52 #include <linux/mm.h>
  53 #include <linux/seq_file.h>
  54 #include <linux/slab.h>
  55 #include <linux/netdevice.h>
  56 #include <linux/vmalloc.h>
  57 #include <linux/init.h>
  58 #include <linux/delay.h>
  59 #include <linux/ioctl.h>
  60
  61 #include <asm/system.h>
  62 #include <asm/io.h>
  63 #include <asm/irq.h>
  64 #include <asm/dma.h>
  65 #include <linux/bitops.h>
  66 #include <asm/types.h>
  67 #include <linux/termios.h>
  68 #include <linux/workqueue.h>
  69 #include <linux/hdlc.h>
  70 #include <linux/synclink.h>
  71
  72 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
  73 #define SYNCLINK_GENERIC_HDLC 1
  74 #else
  75 #define SYNCLINK_GENERIC_HDLC 0
  76 #endif
  77
  78 #define GET_USER(error,value,addr) error = get_user(value,addr)
  79 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
  80 #define PUT_USER(error,value,addr) error = put_user(value,addr)
  81 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
  82
  83 #include <asm/uaccess.h>
  84
  85 static MGSL_PARAMS default_params = {
  86         MGSL_MODE_HDLC,                 /* unsigned long mode */
  87         0,                              /* unsigned char loopback; */
  88         HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
  89         HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
  90         0,                              /* unsigned long clock_speed; */
  91         0xff,                           /* unsigned char addr_filter; */
  92         HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
  93         HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
  94         HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
  95         9600,                           /* unsigned long data_rate; */
  96         8,                              /* unsigned char data_bits; */
  97         1,                              /* unsigned char stop_bits; */
  98         ASYNC_PARITY_NONE               /* unsigned char parity; */
  99 };
 100
 101 /* size in bytes of DMA data buffers */
 102 #define SCABUFSIZE      1024
 103 #define SCA_MEM_SIZE    0x40000
 104 #define SCA_BASE_SIZE   512
 105 #define SCA_REG_SIZE    16
 106 #define SCA_MAX_PORTS   4
 107 #define SCAMAXDESC      128
 108
 109 #define BUFFERLISTSIZE  4096
 110
 111 /* SCA-I style DMA buffer descriptor */
 112 typedef struct _SCADESC
 113 {
 114         u16     next;           /* lower l6 bits of next descriptor addr */
 115         u16     buf_ptr;        /* lower 16 bits of buffer addr */
 116         u8      buf_base;       /* upper 8 bits of buffer addr */
 117         u8      pad1;
 118         u16     length;         /* length of buffer */
 119         u8      status;         /* status of buffer */
 120         u8      pad2;
 121 } SCADESC, *PSCADESC;
 122
 123 typedef struct _SCADESC_EX
 124 {
 125         /* device driver bookkeeping section */
 126         char    *virt_addr;     /* virtual address of data buffer */
 127         u16     phys_entry;     /* lower 16-bits of physical address of this descriptor */
 128 } SCADESC_EX, *PSCADESC_EX;
 129
 130 /* The queue of BH actions to be performed */
 131
 132 #define BH_RECEIVE  1
 133 #define BH_TRANSMIT 2
 134 #define BH_STATUS   4
 135
 136 #define IO_PIN_SHUTDOWN_LIMIT 100
 137
 138 struct  _input_signal_events {
 139         int     ri_up;
 140         int     ri_down;
 141         int     dsr_up;
 142         int     dsr_down;
 143         int     dcd_up;
 144         int     dcd_down;
 145         int     cts_up;
 146         int     cts_down;
 147 };
 148
 149 /*
 150  * Device instance data structure
 151  */
 152 typedef struct _synclinkmp_info {
 153         void *if_ptr;                           /* General purpose pointer (used by SPPP) */
 154         int                     magic;
 155         struct tty_port         port;
 156         int                     line;
 157         unsigned short          close_delay;
 158         unsigned short          closing_wait;   /* time to wait before closing */
 159
 160         struct mgsl_icount      icount;
 161
 162         int                     timeout;
 163         int                     x_char;         /* xon/xoff character */
 164         u16                     read_status_mask1;  /* break detection (SR1 indications) */
 165         u16                     read_status_mask2;  /* parity/framing/overun (SR2 indications) */
 166         unsigned char           ignore_status_mask1;  /* break detection (SR1 indications) */
 167         unsigned char           ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
 168         unsigned char           *tx_buf;
 169         int                     tx_put;
 170         int                     tx_get;
 171         int                     tx_count;
 172
 173         wait_queue_head_t       status_event_wait_q;
 174         wait_queue_head_t       event_wait_q;
 175         struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
 176         struct _synclinkmp_info *next_device;   /* device list link */
 177         struct timer_list       status_timer;   /* input signal status check timer */
 178
 179         spinlock_t lock;                /* spinlock for synchronizing with ISR */
 180         struct work_struct task;                        /* task structure for scheduling bh */
 181
 182         u32 max_frame_size;                     /* as set by device config */
 183
 184         u32 pending_bh;
 185
 186         bool bh_running;                                /* Protection from multiple */
 187         int isr_overflow;
 188         bool bh_requested;
 189
 190         int dcd_chkcount;                       /* check counts to prevent */
 191         int cts_chkcount;                       /* too many IRQs if a signal */
 192         int dsr_chkcount;                       /* is floating */
 193         int ri_chkcount;
 194
 195         char *buffer_list;                      /* virtual address of Rx & Tx buffer lists */
 196         unsigned long buffer_list_phys;
 197
 198         unsigned int rx_buf_count;              /* count of total allocated Rx buffers */
 199         SCADESC *rx_buf_list;                   /* list of receive buffer entries */
 200         SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
 201         unsigned int current_rx_buf;
 202
 203         unsigned int tx_buf_count;              /* count of total allocated Tx buffers */
 204         SCADESC *tx_buf_list;           /* list of transmit buffer entries */
 205         SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
 206         unsigned int last_tx_buf;
 207
 208         unsigned char *tmp_rx_buf;
 209         unsigned int tmp_rx_buf_count;
 210
 211         bool rx_enabled;
 212         bool rx_overflow;
 213
 214         bool tx_enabled;
 215         bool tx_active;
 216         u32 idle_mode;
 217
 218         unsigned char ie0_value;
 219         unsigned char ie1_value;
 220         unsigned char ie2_value;
 221         unsigned char ctrlreg_value;
 222         unsigned char old_signals;
 223
 224         char device_name[25];                   /* device instance name */
 225
 226         int port_count;
 227         int adapter_num;
 228         int port_num;
 229
 230         struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
 231
 232         unsigned int bus_type;                  /* expansion bus type (ISA,EISA,PCI) */
 233
 234         unsigned int irq_level;                 /* interrupt level */
 235         unsigned long irq_flags;
 236         bool irq_requested;                     /* true if IRQ requested */
 237
 238         MGSL_PARAMS params;                     /* communications parameters */
 239
 240         unsigned char serial_signals;           /* current serial signal states */
 241
 242         bool irq_occurred;                      /* for diagnostics use */
 243         unsigned int init_error;                /* Initialization startup error */
 244
 245         u32 last_mem_alloc;
 246         unsigned char* memory_base;             /* shared memory address (PCI only) */
 247         u32 phys_memory_base;
 248         int shared_mem_requested;
 249
 250         unsigned char* sca_base;                /* HD64570 SCA Memory address */
 251         u32 phys_sca_base;
 252         u32 sca_offset;
 253         bool sca_base_requested;
 254
 255         unsigned char* lcr_base;                /* local config registers (PCI only) */
 256         u32 phys_lcr_base;
 257         u32 lcr_offset;
 258         int lcr_mem_requested;
 259
 260         unsigned char* statctrl_base;           /* status/control register memory */
 261         u32 phys_statctrl_base;
 262         u32 statctrl_offset;
 263         bool sca_statctrl_requested;
 264
 265         u32 misc_ctrl_value;
 266         char flag_buf[MAX_ASYNC_BUFFER_SIZE];
 267         char char_buf[MAX_ASYNC_BUFFER_SIZE];
 268         bool drop_rts_on_tx_done;
 269
 270         struct  _input_signal_events    input_signal_events;
 271
 272         /* SPPP/Cisco HDLC device parts */
 273         int netcount;
 274         spinlock_t netlock;
 275
 276 #if SYNCLINK_GENERIC_HDLC
 277         struct net_device *netdev;
 278 #endif
 279
 280 } SLMP_INFO;
 281
 282 #define MGSL_MAGIC 0x5401
 283
 284 /*
 285  * define serial signal status change macros
 286  */
 287 #define MISCSTATUS_DCD_LATCHED  (SerialSignal_DCD<<8)   /* indicates change in DCD */
 288 #define MISCSTATUS_RI_LATCHED   (SerialSignal_RI<<8)    /* indicates change in RI */
 289 #define MISCSTATUS_CTS_LATCHED  (SerialSignal_CTS<<8)   /* indicates change in CTS */
 290 #define MISCSTATUS_DSR_LATCHED  (SerialSignal_DSR<<8)   /* change in DSR */
 291
 292 /* Common Register macros */
 293 #define LPR     0x00
 294 #define PABR0   0x02
 295 #define PABR1   0x03
 296 #define WCRL    0x04
 297 #define WCRM    0x05
 298 #define WCRH    0x06
 299 #define DPCR    0x08
 300 #define DMER    0x09
 301 #define ISR0    0x10
 302 #define ISR1    0x11
 303 #define ISR2    0x12
 304 #define IER0    0x14
 305 #define IER1    0x15
 306 #define IER2    0x16
 307 #define ITCR    0x18
 308 #define INTVR   0x1a
 309 #define IMVR    0x1c
 310
 311 /* MSCI Register macros */
 312 #define TRB     0x20
 313 #define TRBL    0x20
 314 #define TRBH    0x21
 315 #define SR0     0x22
 316 #define SR1     0x23
 317 #define SR2     0x24
 318 #define SR3     0x25
 319 #define FST     0x26
 320 #define IE0     0x28
 321 #define IE1     0x29
 322 #define IE2     0x2a
 323 #define FIE     0x2b
 324 #define CMD     0x2c
 325 #define MD0     0x2e
 326 #define MD1     0x2f
 327 #define MD2     0x30
 328 #define CTL     0x31
 329 #define SA0     0x32
 330 #define SA1     0x33
 331 #define IDL     0x34
 332 #define TMC     0x35
 333 #define RXS     0x36
 334 #define TXS     0x37
 335 #define TRC0    0x38
 336 #define TRC1    0x39
 337 #define RRC     0x3a
 338 #define CST0    0x3c
 339 #define CST1    0x3d
 340
 341 /* Timer Register Macros */
 342 #define TCNT    0x60
 343 #define TCNTL   0x60
 344 #define TCNTH   0x61
 345 #define TCONR   0x62
 346 #define TCONRL  0x62
 347 #define TCONRH  0x63
 348 #define TMCS    0x64
 349 #define TEPR    0x65
 350
 351 /* DMA Controller Register macros */
 352 #define DARL    0x80
 353 #define DARH    0x81
 354 #define DARB    0x82
 355 #define BAR     0x80
 356 #define BARL    0x80
 357 #define BARH    0x81
 358 #define BARB    0x82
 359 #define SAR     0x84
 360 #define SARL    0x84
 361 #define SARH    0x85
 362 #define SARB    0x86
 363 #define CPB     0x86
 364 #define CDA     0x88
 365 #define CDAL    0x88
 366 #define CDAH    0x89
 367 #define EDA     0x8a
 368 #define EDAL    0x8a
 369 #define EDAH    0x8b
 370 #define BFL     0x8c
 371 #define BFLL    0x8c
 372 #define BFLH    0x8d
 373 #define BCR     0x8e
 374 #define BCRL    0x8e
 375 #define BCRH    0x8f
 376 #define DSR     0x90
 377 #define DMR     0x91
 378 #define FCT     0x93
 379 #define DIR     0x94
 380 #define DCMD    0x95
 381
 382 /* combine with timer or DMA register address */
 383 #define TIMER0  0x00
 384 #define TIMER1  0x08
 385 #define TIMER2  0x10
 386 #define TIMER3  0x18
 387 #define RXDMA   0x00
 388 #define TXDMA   0x20
 389
 390 /* SCA Command Codes */
 391 #define NOOP            0x00
 392 #define TXRESET         0x01
 393 #define TXENABLE        0x02
 394 #define TXDISABLE       0x03
 395 #define TXCRCINIT       0x04
 396 #define TXCRCEXCL       0x05
 397 #define TXEOM           0x06
 398 #define TXABORT         0x07
 399 #define MPON            0x08
 400 #define TXBUFCLR        0x09
 401 #define RXRESET         0x11
 402 #define RXENABLE        0x12
 403 #define RXDISABLE       0x13
 404 #define RXCRCINIT       0x14
 405 #define RXREJECT        0x15
 406 #define SEARCHMP        0x16
 407 #define RXCRCEXCL       0x17
 408 #define RXCRCCALC       0x18
 409 #define CHRESET         0x21
 410 #define HUNT            0x31
 411
 412 /* DMA command codes */
 413 #define SWABORT         0x01
 414 #define FEICLEAR        0x02
 415
 416 /* IE0 */
 417 #define TXINTE          BIT7
 418 #define RXINTE          BIT6
 419 #define TXRDYE          BIT1
 420 #define RXRDYE          BIT0
 421
 422 /* IE1 & SR1 */
 423 #define UDRN    BIT7
 424 #define IDLE    BIT6
 425 #define SYNCD   BIT4
 426 #define FLGD    BIT4
 427 #define CCTS    BIT3
 428 #define CDCD    BIT2
 429 #define BRKD    BIT1
 430 #define ABTD    BIT1
 431 #define GAPD    BIT1
 432 #define BRKE    BIT0
 433 #define IDLD    BIT0
 434
 435 /* IE2 & SR2 */
 436 #define EOM     BIT7
 437 #define PMP     BIT6
 438 #define SHRT    BIT6
 439 #define PE      BIT5
 440 #define ABT     BIT5
 441 #define FRME    BIT4
 442 #define RBIT    BIT4
 443 #define OVRN    BIT3
 444 #define CRCE    BIT2
 445
 446
 447 /*
 448  * Global linked list of SyncLink devices
 449  */
 450 static SLMP_INFO *synclinkmp_device_list = NULL;
 451 static int synclinkmp_adapter_count = -1;
 452 static int synclinkmp_device_count = 0;
 453
 454 /*
 455  * Set this param to non-zero to load eax with the
 456  * .text section address and breakpoint on module load.
 457  * This is useful for use with gdb and add-symbol-file command.
 458  */
 459 static bool break_on_load = 0;
 460
 461 /*
 462  * Driver major number, defaults to zero to get auto
 463  * assigned major number. May be forced as module parameter.
 464  */
 465 static int ttymajor = 0;
 466
 467 /*
 468  * Array of user specified options for ISA adapters.
 469  */
 470 static int debug_level = 0;
 471 static int maxframe[MAX_DEVICES] = {0,};
 472
 473 module_param(break_on_load, bool, 0);
 474 module_param(ttymajor, int, 0);
 475 module_param(debug_level, int, 0);
 476 module_param_array(maxframe, int, NULL, 0);
 477
 478 static char *driver_name = "SyncLink MultiPort driver";
 479 static char *driver_version = "$Revision: 4.38 $";
 480
 481 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 482 static void synclinkmp_remove_one(struct pci_dev *dev);
 483
 484 static struct pci_device_id synclinkmp_pci_tbl[] = {
 485         { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
 486         { 0, }, /* terminate list */
 487 };
 488 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
 489
 490 MODULE_LICENSE("GPL");
 491
 492 static struct pci_driver synclinkmp_pci_driver = {
 493         .name           = "synclinkmp",
 494         .id_table       = synclinkmp_pci_tbl,
 495         .probe          = synclinkmp_init_one,
 496         .remove         = __devexit_p(synclinkmp_remove_one),
 497 };
 498
 499
 500 static struct tty_driver *serial_driver;
 501
 502 /* number of characters left in xmit buffer before we ask for more */
 503 #define WAKEUP_CHARS 256
 504
 505
 506 /* tty callbacks */
 507
 508 static int  open(struct tty_struct *tty, struct file * filp);
 509 static void close(struct tty_struct *tty, struct file * filp);
 510 static void hangup(struct tty_struct *tty);
 511 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 512
 513 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 514 static int put_char(struct tty_struct *tty, unsigned char ch);
 515 static void send_xchar(struct tty_struct *tty, char ch);
 516 static void wait_until_sent(struct tty_struct *tty, int timeout);
 517 static int  write_room(struct tty_struct *tty);
 518 static void flush_chars(struct tty_struct *tty);
 519 static void flush_buffer(struct tty_struct *tty);
 520 static void tx_hold(struct tty_struct *tty);
 521 static void tx_release(struct tty_struct *tty);
 522
 523 static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 524 static int  chars_in_buffer(struct tty_struct *tty);
 525 static void throttle(struct tty_struct * tty);
 526 static void unthrottle(struct tty_struct * tty);
 527 static int set_break(struct tty_struct *tty, int break_state);
 528
 529 #if SYNCLINK_GENERIC_HDLC
 530 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
 531 static void hdlcdev_tx_done(SLMP_INFO *info);
 532 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
 533 static int  hdlcdev_init(SLMP_INFO *info);
 534 static void hdlcdev_exit(SLMP_INFO *info);
 535 #endif
 536
 537 /* ioctl handlers */
 538
 539 static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
 540 static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 541 static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 542 static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
 543 static int  set_txidle(SLMP_INFO *info, int idle_mode);
 544 static int  tx_enable(SLMP_INFO *info, int enable);
 545 static int  tx_abort(SLMP_INFO *info);
 546 static int  rx_enable(SLMP_INFO *info, int enable);
 547 static int  modem_input_wait(SLMP_INFO *info,int arg);
 548 static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
 549 static int  tiocmget(struct tty_struct *tty);
 550 static int  tiocmset(struct tty_struct *tty,
 551                         unsigned int set, unsigned int clear);
 552 static int  set_break(struct tty_struct *tty, int break_state);
 553
 554 static void add_device(SLMP_INFO *info);
 555 static void device_init(int adapter_num, struct pci_dev *pdev);
 556 static int  claim_resources(SLMP_INFO *info);
 557 static void release_resources(SLMP_INFO *info);
 558
 559 static int  startup(SLMP_INFO *info);
 560 static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
 561 static int carrier_raised(struct tty_port *port);
 562 static void shutdown(SLMP_INFO *info);
 563 static void program_hw(SLMP_INFO *info);
 564 static void change_params(SLMP_INFO *info);
 565
 566 static bool init_adapter(SLMP_INFO *info);
 567 static bool register_test(SLMP_INFO *info);
 568 static bool irq_test(SLMP_INFO *info);
 569 static bool loopback_test(SLMP_INFO *info);
 570 static int  adapter_test(SLMP_INFO *info);
 571 static bool memory_test(SLMP_INFO *info);
 572
 573 static void reset_adapter(SLMP_INFO *info);
 574 static void reset_port(SLMP_INFO *info);
 575 static void async_mode(SLMP_INFO *info);
 576 static void hdlc_mode(SLMP_INFO *info);
 577
 578 static void rx_stop(SLMP_INFO *info);
 579 static void rx_start(SLMP_INFO *info);
 580 static void rx_reset_buffers(SLMP_INFO *info);
 581 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
 582 static bool rx_get_frame(SLMP_INFO *info);
 583
 584 static void tx_start(SLMP_INFO *info);
 585 static void tx_stop(SLMP_INFO *info);
 586 static void tx_load_fifo(SLMP_INFO *info);
 587 static void tx_set_idle(SLMP_INFO *info);
 588 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
 589
 590 static void get_signals(SLMP_INFO *info);
 591 static void set_signals(SLMP_INFO *info);
 592 static void enable_loopback(SLMP_INFO *info, int enable);
 593 static void set_rate(SLMP_INFO *info, u32 data_rate);
 594
 595 static int  bh_action(SLMP_INFO *info);
 596 static void bh_handler(struct work_struct *work);
 597 static void bh_receive(SLMP_INFO *info);
 598 static void bh_transmit(SLMP_INFO *info);
 599 static void bh_status(SLMP_INFO *info);
 600 static void isr_timer(SLMP_INFO *info);
 601 static void isr_rxint(SLMP_INFO *info);
 602 static void isr_rxrdy(SLMP_INFO *info);
 603 static void isr_txint(SLMP_INFO *info);
 604 static void isr_txrdy(SLMP_INFO *info);
 605 static void isr_rxdmaok(SLMP_INFO *info);
 606 static void isr_rxdmaerror(SLMP_INFO *info);
 607 static void isr_txdmaok(SLMP_INFO *info);
 608 static void isr_txdmaerror(SLMP_INFO *info);
 609 static void isr_io_pin(SLMP_INFO *info, u16 status);
 610
 611 static int  alloc_dma_bufs(SLMP_INFO *info);
 612 static void free_dma_bufs(SLMP_INFO *info);
 613 static int  alloc_buf_list(SLMP_INFO *info);
 614 static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
 615 static int  alloc_tmp_rx_buf(SLMP_INFO *info);
 616 static void free_tmp_rx_buf(SLMP_INFO *info);
 617
 618 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
 619 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
 620 static void tx_timeout(unsigned long context);
 621 static void status_timeout(unsigned long context);
 622
 623 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
 624 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
 625 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
 626 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
 627 static unsigned char read_status_reg(SLMP_INFO * info);
 628 static void write_control_reg(SLMP_INFO * info);
 629
 630
 631 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
 632 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
 633 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
 634
 635 static u32 misc_ctrl_value = 0x007e4040;
 636 static u32 lcr1_brdr_value = 0x00800028;
 637
 638 static u32 read_ahead_count = 8;
 639
 640 /* DPCR, DMA Priority Control
 641  *
 642  * 07..05  Not used, must be 0
 643  * 04      BRC, bus release condition: 0=all transfers complete
 644  *              1=release after 1 xfer on all channels
 645  * 03      CCC, channel change condition: 0=every cycle
 646  *              1=after each channel completes all xfers
 647  * 02..00  PR<2..0>, priority 100=round robin
 648  *
 649  * 00000100 = 0x00
 650  */
 651 static unsigned char dma_priority = 0x04;
 652
 653 // Number of bytes that can be written to shared RAM
 654 // in a single write operation
 655 static u32 sca_pci_load_interval = 64;
 656
 657 /*
 658  * 1st function defined in .text section. Calling this function in
 659  * init_module() followed by a breakpoint allows a remote debugger
 660  * (gdb) to get the .text address for the add-symbol-file command.
 661  * This allows remote debugging of dynamically loadable modules.
 662  */
 663 static void* synclinkmp_get_text_ptr(void);
 664 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
 665
 666 static inline int sanity_check(SLMP_INFO *info,
 667                                char *name, const char *routine)
 668 {
 669 #ifdef SANITY_CHECK
 670         static const char *badmagic =
 671                 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
 672         static const char *badinfo =
 673                 "Warning: null synclinkmp_struct for (%s) in %s\n";
 674
 675         if (!info) {
 676                 printk(badinfo, name, routine);
 677                 return 1;
 678         }
 679         if (info->magic != MGSL_MAGIC) {
 680                 printk(badmagic, name, routine);
 681                 return 1;
 682         }
 683 #else
 684         if (!info)
 685                 return 1;
 686 #endif
 687         return 0;
 688 }
 689
 690 /**
 691  * line discipline callback wrappers
 692  *
 693  * The wrappers maintain line discipline references
 694  * while calling into the line discipline.
 695  *
 696  * ldisc_receive_buf  - pass receive data to line discipline
 697  */
 698
 699 static void ldisc_receive_buf(struct tty_struct *tty,
 700                               const __u8 *data, char *flags, int count)
 701 {
 702         struct tty_ldisc *ld;
 703         if (!tty)
 704                 return;
 705         ld = tty_ldisc_ref(tty);
 706         if (ld) {
 707                 if (ld->ops->receive_buf)
 708                         ld->ops->receive_buf(tty, data, flags, count);
 709                 tty_ldisc_deref(ld);
 710         }
 711 }
 712
 713 /* tty callbacks */
 714
 715 /* Called when a port is opened.  Init and enable port.
 716  */
 717 static int open(struct tty_struct *tty, struct file *filp)
 718 {
 719         SLMP_INFO *info;
 720         int retval, line;
 721         unsigned long flags;
 722
 723         line = tty->index;
 724         if (line >= synclinkmp_device_count) {
 725                 printk("%s(%d): open with invalid line #%d.\n",
 726                         __FILE__,__LINE__,line);
 727                 return -ENODEV;
 728         }
 729
 730         info = synclinkmp_device_list;
 731         while(info && info->line != line)
 732                 info = info->next_device;
 733         if (sanity_check(info, tty->name, "open"))
 734                 return -ENODEV;
 735         if ( info->init_error ) {
 736                 printk("%s(%d):%s device is not allocated, init error=%d\n",
 737                         __FILE__,__LINE__,info->device_name,info->init_error);
 738                 return -ENODEV;
 739         }
 740
 741         tty->driver_data = info;
 742         info->port.tty = tty;
 743
 744         if (debug_level >= DEBUG_LEVEL_INFO)
 745                 printk("%s(%d):%s open(), old ref count = %d\n",
 746                          __FILE__,__LINE__,tty->driver->name, info->port.count);
 747
 748         /* If port is closing, signal caller to try again */
 749         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 750                 if (info->port.flags & ASYNC_CLOSING)
 751                         interruptible_sleep_on(&info->port.close_wait);
 752                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 753                         -EAGAIN : -ERESTARTSYS);
 754                 goto cleanup;
 755         }
 756
 757         info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 758
 759         spin_lock_irqsave(&info->netlock, flags);
 760         if (info->netcount) {
 761                 retval = -EBUSY;
 762                 spin_unlock_irqrestore(&info->netlock, flags);
 763                 goto cleanup;
 764         }
 765         info->port.count++;
 766         spin_unlock_irqrestore(&info->netlock, flags);
 767
 768         if (info->port.count == 1) {
 769                 /* 1st open on this device, init hardware */
 770                 retval = startup(info);
 771                 if (retval < 0)
 772                         goto cleanup;
 773         }
 774
 775         retval = block_til_ready(tty, filp, info);
 776         if (retval) {
 777                 if (debug_level >= DEBUG_LEVEL_INFO)
 778                         printk("%s(%d):%s block_til_ready() returned %d\n",
 779                                  __FILE__,__LINE__, info->device_name, retval);
 780                 goto cleanup;
 781         }
 782
 783         if (debug_level >= DEBUG_LEVEL_INFO)
 784                 printk("%s(%d):%s open() success\n",
 785                          __FILE__,__LINE__, info->device_name);
 786         retval = 0;
 787
 788 cleanup:
 789         if (retval) {
 790                 if (tty->count == 1)
 791                         info->port.tty = NULL; /* tty layer will release tty struct */
 792                 if(info->port.count)
 793                         info->port.count--;
 794         }
 795
 796         return retval;
 797 }
 798
 799 /* Called when port is closed. Wait for remaining data to be
 800  * sent. Disable port and free resources.
 801  */
 802 static void close(struct tty_struct *tty, struct file *filp)
 803 {
 804         SLMP_INFO * info = tty->driver_data;
 805
 806         if (sanity_check(info, tty->name, "close"))
 807                 return;
 808
 809         if (debug_level >= DEBUG_LEVEL_INFO)
 810                 printk("%s(%d):%s close() entry, count=%d\n",
 811                          __FILE__,__LINE__, info->device_name, info->port.count);
 812
 813         if (tty_port_close_start(&info->port, tty, filp) == 0)
 814                 goto cleanup;
 815
 816         mutex_lock(&info->port.mutex);
 817         if (info->port.flags & ASYNC_INITIALIZED)
 818                 wait_until_sent(tty, info->timeout);
 819
 820         flush_buffer(tty);
 821         tty_ldisc_flush(tty);
 822         shutdown(info);
 823         mutex_unlock(&info->port.mutex);
 824
 825         tty_port_close_end(&info->port, tty);
 826         info->port.tty = NULL;
 827 cleanup:
 828         if (debug_level >= DEBUG_LEVEL_INFO)
 829                 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
 830                         tty->driver->name, info->port.count);
 831 }
 832
 833 /* Called by tty_hangup() when a hangup is signaled.
 834  * This is the same as closing all open descriptors for the port.
 835  */
 836 static void hangup(struct tty_struct *tty)
 837 {
 838         SLMP_INFO *info = tty->driver_data;
 839         unsigned long flags;
 840
 841         if (debug_level >= DEBUG_LEVEL_INFO)
 842                 printk("%s(%d):%s hangup()\n",
 843                          __FILE__,__LINE__, info->device_name );
 844
 845         if (sanity_check(info, tty->name, "hangup"))
 846                 return;
 847
 848         mutex_lock(&info->port.mutex);
 849         flush_buffer(tty);
 850         shutdown(info);
 851
 852         spin_lock_irqsave(&info->port.lock, flags);
 853         info->port.count = 0;
 854         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 855         info->port.tty = NULL;
 856         spin_unlock_irqrestore(&info->port.lock, flags);
 857         mutex_unlock(&info->port.mutex);
 858
 859         wake_up_interruptible(&info->port.open_wait);
 860 }
 861
 862 /* Set new termios settings
 863  */
 864 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 865 {
 866         SLMP_INFO *info = tty->driver_data;
 867         unsigned long flags;
 868
 869         if (debug_level >= DEBUG_LEVEL_INFO)
 870                 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
 871                         tty->driver->name );
 872
 873         change_params(info);
 874
 875         /* Handle transition to B0 status */
 876         if (old_termios->c_cflag & CBAUD &&
 877             !(tty->termios->c_cflag & CBAUD)) {
 878                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
 879                 spin_lock_irqsave(&info->lock,flags);
 880                 set_signals(info);
 881                 spin_unlock_irqrestore(&info->lock,flags);
 882         }
 883
 884         /* Handle transition away from B0 status */
 885         if (!(old_termios->c_cflag & CBAUD) &&
 886             tty->termios->c_cflag & CBAUD) {
 887                 info->serial_signals |= SerialSignal_DTR;
 888                 if (!(tty->termios->c_cflag & CRTSCTS) ||
 889                     !test_bit(TTY_THROTTLED, &tty->flags)) {
 890                         info->serial_signals |= SerialSignal_RTS;
 891                 }
 892                 spin_lock_irqsave(&info->lock,flags);
 893                 set_signals(info);
 894                 spin_unlock_irqrestore(&info->lock,flags);
 895         }
 896
 897         /* Handle turning off CRTSCTS */
 898         if (old_termios->c_cflag & CRTSCTS &&
 899             !(tty->termios->c_cflag & CRTSCTS)) {
 900                 tty->hw_stopped = 0;
 901                 tx_release(tty);
 902         }
 903 }
 904
 905 /* Send a block of data
 906  *
 907  * Arguments:
 908  *
 909  *      tty             pointer to tty information structure
 910  *      buf             pointer to buffer containing send data
 911  *      count           size of send data in bytes
 912  *
 913  * Return Value:        number of characters written
 914  */
 915 static int write(struct tty_struct *tty,
 916                  const unsigned char *buf, int count)
 917 {
 918         int     c, ret = 0;
 919         SLMP_INFO *info = tty->driver_data;
 920         unsigned long flags;
 921
 922         if (debug_level >= DEBUG_LEVEL_INFO)
 923                 printk("%s(%d):%s write() count=%d\n",
 924                        __FILE__,__LINE__,info->device_name,count);
 925
 926         if (sanity_check(info, tty->name, "write"))
 927                 goto cleanup;
 928
 929         if (!info->tx_buf)
 930                 goto cleanup;
 931
 932         if (info->params.mode == MGSL_MODE_HDLC) {
 933                 if (count > info->max_frame_size) {
 934                         ret = -EIO;
 935                         goto cleanup;
 936                 }
 937                 if (info->tx_active)
 938                         goto cleanup;
 939                 if (info->tx_count) {
 940                         /* send accumulated data from send_char() calls */
 941                         /* as frame and wait before accepting more data. */
 942                         tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 943                         goto start;
 944                 }
 945                 ret = info->tx_count = count;
 946                 tx_load_dma_buffer(info, buf, count);
 947                 goto start;
 948         }
 949
 950         for (;;) {
 951                 c = min_t(int, count,
 952                         min(info->max_frame_size - info->tx_count - 1,
 953                             info->max_frame_size - info->tx_put));
 954                 if (c <= 0)
 955                         break;
 956
 957                 memcpy(info->tx_buf + info->tx_put, buf, c);
 958
 959                 spin_lock_irqsave(&info->lock,flags);
 960                 info->tx_put += c;
 961                 if (info->tx_put >= info->max_frame_size)
 962                         info->tx_put -= info->max_frame_size;
 963                 info->tx_count += c;
 964                 spin_unlock_irqrestore(&info->lock,flags);
 965
 966                 buf += c;
 967                 count -= c;
 968                 ret += c;
 969         }
 970
 971         if (info->params.mode == MGSL_MODE_HDLC) {
 972                 if (count) {
 973                         ret = info->tx_count = 0;
 974                         goto cleanup;
 975                 }
 976                 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 977         }
 978 start:
 979         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
 980                 spin_lock_irqsave(&info->lock,flags);
 981                 if (!info->tx_active)
 982                         tx_start(info);
 983                 spin_unlock_irqrestore(&info->lock,flags);
 984         }
 985
 986 cleanup:
 987         if (debug_level >= DEBUG_LEVEL_INFO)
 988                 printk( "%s(%d):%s write() returning=%d\n",
 989                         __FILE__,__LINE__,info->device_name,ret);
 990         return ret;
 991 }
 992
 993 /* Add a character to the transmit buffer.
 994  */
 995 static int put_char(struct tty_struct *tty, unsigned char ch)
 996 {
 997         SLMP_INFO *info = tty->driver_data;
 998         unsigned long flags;
 999         int ret = 0;
1000
1001         if ( debug_level >= DEBUG_LEVEL_INFO ) {
1002                 printk( "%s(%d):%s put_char(%d)\n",
1003                         __FILE__,__LINE__,info->device_name,ch);
1004         }
1005
1006         if (sanity_check(info, tty->name, "put_char"))
1007                 return 0;
1008
1009         if (!info->tx_buf)
1010                 return 0;
1011
1012         spin_lock_irqsave(&info->lock,flags);
1013
1014         if ( (info->params.mode != MGSL_MODE_HDLC) ||
1015              !info->tx_active ) {
1016
1017                 if (info->tx_count < info->max_frame_size - 1) {
1018                         info->tx_buf[info->tx_put++] = ch;
1019                         if (info->tx_put >= info->max_frame_size)
1020                                 info->tx_put -= info->max_frame_size;
1021                         info->tx_count++;
1022                         ret = 1;
1023                 }
1024         }
1025
1026         spin_unlock_irqrestore(&info->lock,flags);
1027         return ret;
1028 }
1029
1030 /* Send a high-priority XON/XOFF character
1031  */
1032 static void send_xchar(struct tty_struct *tty, char ch)
1033 {
1034         SLMP_INFO *info = tty->driver_data;
1035         unsigned long flags;
1036
1037         if (debug_level >= DEBUG_LEVEL_INFO)
1038                 printk("%s(%d):%s send_xchar(%d)\n",
1039                          __FILE__,__LINE__, info->device_name, ch );
1040
1041         if (sanity_check(info, tty->name, "send_xchar"))
1042                 return;
1043
1044         info->x_char = ch;
1045         if (ch) {
1046                 /* Make sure transmit interrupts are on */
1047                 spin_lock_irqsave(&info->lock,flags);
1048                 if (!info->tx_enabled)
1049                         tx_start(info);
1050                 spin_unlock_irqrestore(&info->lock,flags);
1051         }
1052 }
1053
1054 /* Wait until the transmitter is empty.
1055  */
1056 static void wait_until_sent(struct tty_struct *tty, int timeout)
1057 {
1058         SLMP_INFO * info = tty->driver_data;
1059         unsigned long orig_jiffies, char_time;
1060
1061         if (!info )
1062                 return;
1063
1064         if (debug_level >= DEBUG_LEVEL_INFO)
1065                 printk("%s(%d):%s wait_until_sent() entry\n",
1066                          __FILE__,__LINE__, info->device_name );
1067
1068         if (sanity_check(info, tty->name, "wait_until_sent"))
1069                 return;
1070
1071         if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
1072                 goto exit;
1073
1074         orig_jiffies = jiffies;
1075
1076         /* Set check interval to 1/5 of estimated time to
1077          * send a character, and make it at least 1. The check
1078          * interval should also be less than the timeout.
1079          * Note: use tight timings here to satisfy the NIST-PCTS.
1080          */
1081
1082         if ( info->params.data_rate ) {
1083                 char_time = info->timeout/(32 * 5);
1084                 if (!char_time)
1085                         char_time++;
1086         } else
1087                 char_time = 1;
1088
1089         if (timeout)
1090                 char_time = min_t(unsigned long, char_time, timeout);
1091
1092         if ( info->params.mode == MGSL_MODE_HDLC ) {
1093                 while (info->tx_active) {
1094                         msleep_interruptible(jiffies_to_msecs(char_time));
1095                         if (signal_pending(current))
1096                                 break;
1097                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1098                                 break;
1099                 }
1100         } else {
1101                 /*
1102                  * TODO: determine if there is something similar to USC16C32
1103                  *       TXSTATUS_ALL_SENT status
1104                  */
1105                 while ( info->tx_active && info->tx_enabled) {
1106                         msleep_interruptible(jiffies_to_msecs(char_time));
1107                         if (signal_pending(current))
1108                                 break;
1109                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1110                                 break;
1111                 }
1112         }
1113
1114 exit:
1115         if (debug_level >= DEBUG_LEVEL_INFO)
1116                 printk("%s(%d):%s wait_until_sent() exit\n",
1117                          __FILE__,__LINE__, info->device_name );
1118 }
1119
1120 /* Return the count of free bytes in transmit buffer
1121  */
1122 static int write_room(struct tty_struct *tty)
1123 {
1124         SLMP_INFO *info = tty->driver_data;
1125         int ret;
1126
1127         if (sanity_check(info, tty->name, "write_room"))
1128                 return 0;
1129
1130         if (info->params.mode == MGSL_MODE_HDLC) {
1131                 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1132         } else {
1133                 ret = info->max_frame_size - info->tx_count - 1;
1134                 if (ret < 0)
1135                         ret = 0;
1136         }
1137
1138         if (debug_level >= DEBUG_LEVEL_INFO)
1139                 printk("%s(%d):%s write_room()=%d\n",
1140                        __FILE__, __LINE__, info->device_name, ret);
1141
1142         return ret;
1143 }
1144
1145 /* enable transmitter and send remaining buffered characters
1146  */
1147 static void flush_chars(struct tty_struct *tty)
1148 {
1149         SLMP_INFO *info = tty->driver_data;
1150         unsigned long flags;
1151
1152         if ( debug_level >= DEBUG_LEVEL_INFO )
1153                 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1154                         __FILE__,__LINE__,info->device_name,info->tx_count);
1155
1156         if (sanity_check(info, tty->name, "flush_chars"))
1157                 return;
1158
1159         if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1160             !info->tx_buf)
1161                 return;
1162
1163         if ( debug_level >= DEBUG_LEVEL_INFO )
1164                 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1165                         __FILE__,__LINE__,info->device_name );
1166
1167         spin_lock_irqsave(&info->lock,flags);
1168
1169         if (!info->tx_active) {
1170                 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1171                         info->tx_count ) {
1172                         /* operating in synchronous (frame oriented) mode */
1173                         /* copy data from circular tx_buf to */
1174                         /* transmit DMA buffer. */
1175                         tx_load_dma_buffer(info,
1176                                  info->tx_buf,info->tx_count);
1177                 }
1178                 tx_start(info);
1179         }
1180
1181         spin_unlock_irqrestore(&info->lock,flags);
1182 }
1183
1184 /* Discard all data in the send buffer
1185  */
1186 static void flush_buffer(struct tty_struct *tty)
1187 {
1188         SLMP_INFO *info = tty->driver_data;
1189         unsigned long flags;
1190
1191         if (debug_level >= DEBUG_LEVEL_INFO)
1192                 printk("%s(%d):%s flush_buffer() entry\n",
1193                          __FILE__,__LINE__, info->device_name );
1194
1195         if (sanity_check(info, tty->name, "flush_buffer"))
1196                 return;
1197
1198         spin_lock_irqsave(&info->lock,flags);
1199         info->tx_count = info->tx_put = info->tx_get = 0;
1200         del_timer(&info->tx_timer);
1201         spin_unlock_irqrestore(&info->lock,flags);
1202
1203         tty_wakeup(tty);
1204 }
1205
1206 /* throttle (stop) transmitter
1207  */
1208 static void tx_hold(struct tty_struct *tty)
1209 {
1210         SLMP_INFO *info = tty->driver_data;
1211         unsigned long flags;
1212
1213         if (sanity_check(info, tty->name, "tx_hold"))
1214                 return;
1215
1216         if ( debug_level >= DEBUG_LEVEL_INFO )
1217                 printk("%s(%d):%s tx_hold()\n",
1218                         __FILE__,__LINE__,info->device_name);
1219
1220         spin_lock_irqsave(&info->lock,flags);
1221         if (info->tx_enabled)
1222                 tx_stop(info);
1223         spin_unlock_irqrestore(&info->lock,flags);
1224 }
1225
1226 /* release (start) transmitter
1227  */
1228 static void tx_release(struct tty_struct *tty)
1229 {
1230         SLMP_INFO *info = tty->driver_data;
1231         unsigned long flags;
1232
1233         if (sanity_check(info, tty->name, "tx_release"))
1234                 return;
1235
1236         if ( debug_level >= DEBUG_LEVEL_INFO )
1237                 printk("%s(%d):%s tx_release()\n",
1238                         __FILE__,__LINE__,info->device_name);
1239
1240         spin_lock_irqsave(&info->lock,flags);
1241         if (!info->tx_enabled)
1242                 tx_start(info);
1243         spin_unlock_irqrestore(&info->lock,flags);
1244 }
1245
1246 /* Service an IOCTL request
1247  *
1248  * Arguments:
1249  *
1250  *      tty     pointer to tty instance data
1251  *      cmd     IOCTL command code
1252  *      arg     command argument/context
1253  *
1254  * Return Value:        0 if success, otherwise error code
1255  */
1256 static int ioctl(struct tty_struct *tty,
1257                  unsigned int cmd, unsigned long arg)
1258 {
1259         SLMP_INFO *info = tty->driver_data;
1260         void __user *argp = (void __user *)arg;
1261
1262         if (debug_level >= DEBUG_LEVEL_INFO)
1263                 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1264                         info->device_name, cmd );
1265
1266         if (sanity_check(info, tty->name, "ioctl"))
1267                 return -ENODEV;
1268
1269         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1270             (cmd != TIOCMIWAIT)) {
1271                 if (tty->flags & (1 << TTY_IO_ERROR))
1272                     return -EIO;
1273         }
1274
1275         switch (cmd) {
1276         case MGSL_IOCGPARAMS:
1277                 return get_params(info, argp);
1278         case MGSL_IOCSPARAMS:
1279                 return set_params(info, argp);
1280         case MGSL_IOCGTXIDLE:
1281                 return get_txidle(info, argp);
1282         case MGSL_IOCSTXIDLE:
1283                 return set_txidle(info, (int)arg);
1284         case MGSL_IOCTXENABLE:
1285                 return tx_enable(info, (int)arg);
1286         case MGSL_IOCRXENABLE:
1287                 return rx_enable(info, (int)arg);
1288         case MGSL_IOCTXABORT:
1289                 return tx_abort(info);
1290         case MGSL_IOCGSTATS:
1291                 return get_stats(info, argp);
1292         case MGSL_IOCWAITEVENT:
1293                 return wait_mgsl_event(info, argp);
1294         case MGSL_IOCLOOPTXDONE:
1295                 return 0; // TODO: Not supported, need to document
1296                 /* Wait for modem input (DCD,RI,DSR,CTS) change
1297                  * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1298                  */
1299         case TIOCMIWAIT:
1300                 return modem_input_wait(info,(int)arg);
1301
1302                 /*
1303                  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1304                  * Return: write counters to the user passed counter struct
1305                  * NB: both 1->0 and 0->1 transitions are counted except for
1306                  *     RI where only 0->1 is counted.
1307                  */
1308         default:
1309                 return -ENOIOCTLCMD;
1310         }
1311         return 0;
1312 }
1313
1314 static int get_icount(struct tty_struct *tty,
1315                                 struct serial_icounter_struct *icount)
1316 {
1317         SLMP_INFO *info = tty->driver_data;
1318         struct mgsl_icount cnow;        /* kernel counter temps */
1319         unsigned long flags;
1320
1321         spin_lock_irqsave(&info->lock,flags);
1322         cnow = info->icount;
1323         spin_unlock_irqrestore(&info->lock,flags);
1324
1325         icount->cts = cnow.cts;
1326         icount->dsr = cnow.dsr;
1327         icount->rng = cnow.rng;
1328         icount->dcd = cnow.dcd;
1329         icount->rx = cnow.rx;
1330         icount->tx = cnow.tx;
1331         icount->frame = cnow.frame;
1332         icount->overrun = cnow.overrun;
1333         icount->parity = cnow.parity;
1334         icount->brk = cnow.brk;
1335         icount->buf_overrun = cnow.buf_overrun;
1336
1337         return 0;
1338 }
1339
1340 /*
1341  * /proc fs routines....
1342  */
1343
1344 static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1345 {
1346         char    stat_buf[30];
1347         unsigned long flags;
1348
1349         seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1350                        "\tIRQ=%d MaxFrameSize=%u\n",
1351                 info->device_name,
1352                 info->phys_sca_base,
1353                 info->phys_memory_base,
1354                 info->phys_statctrl_base,
1355                 info->phys_lcr_base,
1356                 info->irq_level,
1357                 info->max_frame_size );
1358
1359         /* output current serial signal states */
1360         spin_lock_irqsave(&info->lock,flags);
1361         get_signals(info);
1362         spin_unlock_irqrestore(&info->lock,flags);
1363
1364         stat_buf[0] = 0;
1365         stat_buf[1] = 0;
1366         if (info->serial_signals & SerialSignal_RTS)
1367                 strcat(stat_buf, "|RTS");
1368         if (info->serial_signals & SerialSignal_CTS)
1369                 strcat(stat_buf, "|CTS");
1370         if (info->serial_signals & SerialSignal_DTR)
1371                 strcat(stat_buf, "|DTR");
1372         if (info->serial_signals & SerialSignal_DSR)
1373                 strcat(stat_buf, "|DSR");
1374         if (info->serial_signals & SerialSignal_DCD)
1375                 strcat(stat_buf, "|CD");
1376         if (info->serial_signals & SerialSignal_RI)
1377                 strcat(stat_buf, "|RI");
1378
1379         if (info->params.mode == MGSL_MODE_HDLC) {
1380                 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1381                               info->icount.txok, info->icount.rxok);
1382                 if (info->icount.txunder)
1383                         seq_printf(m, " txunder:%d", info->icount.txunder);
1384                 if (info->icount.txabort)
1385                         seq_printf(m, " txabort:%d", info->icount.txabort);
1386                 if (info->icount.rxshort)
1387                         seq_printf(m, " rxshort:%d", info->icount.rxshort);
1388                 if (info->icount.rxlong)
1389                         seq_printf(m, " rxlong:%d", info->icount.rxlong);
1390                 if (info->icount.rxover)
1391                         seq_printf(m, " rxover:%d", info->icount.rxover);
1392                 if (info->icount.rxcrc)
1393                         seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1394         } else {
1395                 seq_printf(m, "\tASYNC tx:%d rx:%d",
1396                               info->icount.tx, info->icount.rx);
1397                 if (info->icount.frame)
1398                         seq_printf(m, " fe:%d", info->icount.frame);
1399                 if (info->icount.parity)
1400                         seq_printf(m, " pe:%d", info->icount.parity);
1401                 if (info->icount.brk)
1402                         seq_printf(m, " brk:%d", info->icount.brk);
1403                 if (info->icount.overrun)
1404                         seq_printf(m, " oe:%d", info->icount.overrun);
1405         }
1406
1407         /* Append serial signal status to end */
1408         seq_printf(m, " %s\n", stat_buf+1);
1409
1410         seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1411          info->tx_active,info->bh_requested,info->bh_running,
1412          info->pending_bh);
1413 }
1414
1415 /* Called to print information about devices
1416  */
1417 static int synclinkmp_proc_show(struct seq_file *m, void *v)
1418 {
1419         SLMP_INFO *info;
1420
1421         seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1422
1423         info = synclinkmp_device_list;
1424         while( info ) {
1425                 line_info(m, info);
1426                 info = info->next_device;
1427         }
1428         return 0;
1429 }
1430
1431 static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1432 {
1433         return single_open(file, synclinkmp_proc_show, NULL);
1434 }
1435
1436 static const struct file_operations synclinkmp_proc_fops = {
1437         .owner          = THIS_MODULE,
1438         .open           = synclinkmp_proc_open,
1439         .read           = seq_read,
1440         .llseek         = seq_lseek,
1441         .release        = single_release,
1442 };
1443
1444 /* Return the count of bytes in transmit buffer
1445  */
1446 static int chars_in_buffer(struct tty_struct *tty)
1447 {
1448         SLMP_INFO *info = tty->driver_data;
1449
1450         if (sanity_check(info, tty->name, "chars_in_buffer"))
1451                 return 0;
1452
1453         if (debug_level >= DEBUG_LEVEL_INFO)
1454                 printk("%s(%d):%s chars_in_buffer()=%d\n",
1455                        __FILE__, __LINE__, info->device_name, info->tx_count);
1456
1457         return info->tx_count;
1458 }
1459
1460 /* Signal remote device to throttle send data (our receive data)
1461  */
1462 static void throttle(struct tty_struct * tty)
1463 {
1464         SLMP_INFO *info = tty->driver_data;
1465         unsigned long flags;
1466
1467         if (debug_level >= DEBUG_LEVEL_INFO)
1468                 printk("%s(%d):%s throttle() entry\n",
1469                          __FILE__,__LINE__, info->device_name );
1470
1471         if (sanity_check(info, tty->name, "throttle"))
1472                 return;
1473
1474         if (I_IXOFF(tty))
1475                 send_xchar(tty, STOP_CHAR(tty));
1476
1477         if (tty->termios->c_cflag & CRTSCTS) {
1478                 spin_lock_irqsave(&info->lock,flags);
1479                 info->serial_signals &= ~SerialSignal_RTS;
1480                 set_signals(info);
1481                 spin_unlock_irqrestore(&info->lock,flags);
1482         }
1483 }
1484
1485 /* Signal remote device to stop throttling send data (our receive data)
1486  */
1487 static void unthrottle(struct tty_struct * tty)
1488 {
1489         SLMP_INFO *info = tty->driver_data;
1490         unsigned long flags;
1491
1492         if (debug_level >= DEBUG_LEVEL_INFO)
1493                 printk("%s(%d):%s unthrottle() entry\n",
1494                          __FILE__,__LINE__, info->device_name );
1495
1496         if (sanity_check(info, tty->name, "unthrottle"))
1497                 return;
1498
1499         if (I_IXOFF(tty)) {
1500                 if (info->x_char)
1501                         info->x_char = 0;
1502                 else
1503                         send_xchar(tty, START_CHAR(tty));
1504         }
1505
1506         if (tty->termios->c_cflag & CRTSCTS) {
1507                 spin_lock_irqsave(&info->lock,flags);
1508                 info->serial_signals |= SerialSignal_RTS;
1509                 set_signals(info);
1510                 spin_unlock_irqrestore(&info->lock,flags);
1511         }
1512 }
1513
1514 /* set or clear transmit break condition
1515  * break_state  -1=set break condition, 0=clear
1516  */
1517 static int set_break(struct tty_struct *tty, int break_state)
1518 {
1519         unsigned char RegValue;
1520         SLMP_INFO * info = tty->driver_data;
1521         unsigned long flags;
1522
1523         if (debug_level >= DEBUG_LEVEL_INFO)
1524                 printk("%s(%d):%s set_break(%d)\n",
1525                          __FILE__,__LINE__, info->device_name, break_state);
1526
1527         if (sanity_check(info, tty->name, "set_break"))
1528                 return -EINVAL;
1529
1530         spin_lock_irqsave(&info->lock,flags);
1531         RegValue = read_reg(info, CTL);
1532         if (break_state == -1)
1533                 RegValue |= BIT3;
1534         else
1535                 RegValue &= ~BIT3;
1536         write_reg(info, CTL, RegValue);
1537         spin_unlock_irqrestore(&info->lock,flags);
1538         return 0;
1539 }
1540
1541 #if SYNCLINK_GENERIC_HDLC
1542
1543 /**
1544  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1545  * set encoding and frame check sequence (FCS) options
1546  *
1547  * dev       pointer to network device structure
1548  * encoding  serial encoding setting
1549  * parity    FCS setting
1550  *
1551  * returns 0 if success, otherwise error code
1552  */
1553 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1554                           unsigned short parity)
1555 {
1556         SLMP_INFO *info = dev_to_port(dev);
1557         unsigned char  new_encoding;
1558         unsigned short new_crctype;
1559
1560         /* return error if TTY interface open */
1561         if (info->port.count)
1562                 return -EBUSY;
1563
1564         switch (encoding)
1565         {
1566         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1567         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1568         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1569         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1570         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1571         default: return -EINVAL;
1572         }
1573
1574         switch (parity)
1575         {
1576         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1577         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1578         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1579         default: return -EINVAL;
1580         }
1581
1582         info->params.encoding = new_encoding;
1583         info->params.crc_type = new_crctype;
1584
1585         /* if network interface up, reprogram hardware */
1586         if (info->netcount)
1587                 program_hw(info);
1588
1589         return 0;
1590 }
1591
1592 /**
1593  * called by generic HDLC layer to send frame
1594  *
1595  * skb  socket buffer containing HDLC frame
1596  * dev  pointer to network device structure
1597  */
1598 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1599                                       struct net_device *dev)
1600 {
1601         SLMP_INFO *info = dev_to_port(dev);
1602         unsigned long flags;
1603
1604         if (debug_level >= DEBUG_LEVEL_INFO)
1605                 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1606
1607         /* stop sending until this frame completes */
1608         netif_stop_queue(dev);
1609
1610         /* copy data to device buffers */
1611         info->tx_count = skb->len;
1612         tx_load_dma_buffer(info, skb->data, skb->len);
1613
1614         /* update network statistics */
1615         dev->stats.tx_packets++;
1616         dev->stats.tx_bytes += skb->len;
1617
1618         /* done with socket buffer, so free it */
1619         dev_kfree_skb(skb);
1620
1621         /* save start time for transmit timeout detection */
1622         dev->trans_start = jiffies;
1623
1624         /* start hardware transmitter if necessary */
1625         spin_lock_irqsave(&info->lock,flags);
1626         if (!info->tx_active)
1627                 tx_start(info);
1628         spin_unlock_irqrestore(&info->lock,flags);
1629
1630         return NETDEV_TX_OK;
1631 }
1632
1633 /**
1634  * called by network layer when interface enabled
1635  * claim resources and initialize hardware
1636  *
1637  * dev  pointer to network device structure
1638  *
1639  * returns 0 if success, otherwise error code
1640  */
1641 static int hdlcdev_open(struct net_device *dev)
1642 {
1643         SLMP_INFO *info = dev_to_port(dev);
1644         int rc;
1645         unsigned long flags;
1646
1647         if (debug_level >= DEBUG_LEVEL_INFO)
1648                 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1649
1650         /* generic HDLC layer open processing */
1651         if ((rc = hdlc_open(dev)))
1652                 return rc;
1653
1654         /* arbitrate between network and tty opens */
1655         spin_lock_irqsave(&info->netlock, flags);
1656         if (info->port.count != 0 || info->netcount != 0) {
1657                 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1658                 spin_unlock_irqrestore(&info->netlock, flags);
1659                 return -EBUSY;
1660         }
1661         info->netcount=1;
1662         spin_unlock_irqrestore(&info->netlock, flags);
1663
1664         /* claim resources and init adapter */
1665         if ((rc = startup(info)) != 0) {
1666                 spin_lock_irqsave(&info->netlock, flags);
1667                 info->netcount=0;
1668                 spin_unlock_irqrestore(&info->netlock, flags);
1669                 return rc;
1670         }
1671
1672         /* assert DTR and RTS, apply hardware settings */
1673         info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1674         program_hw(info);
1675
1676         /* enable network layer transmit */
1677         dev->trans_start = jiffies;
1678         netif_start_queue(dev);
1679
1680         /* inform generic HDLC layer of current DCD status */
1681         spin_lock_irqsave(&info->lock, flags);
1682         get_signals(info);
1683         spin_unlock_irqrestore(&info->lock, flags);
1684         if (info->serial_signals & SerialSignal_DCD)
1685                 netif_carrier_on(dev);
1686         else
1687                 netif_carrier_off(dev);
1688         return 0;
1689 }
1690
1691 /**
1692  * called by network layer when interface is disabled
1693  * shutdown hardware and release resources
1694  *
1695  * dev  pointer to network device structure
1696  *
1697  * returns 0 if success, otherwise error code
1698  */
1699 static int hdlcdev_close(struct net_device *dev)
1700 {
1701         SLMP_INFO *info = dev_to_port(dev);
1702         unsigned long flags;
1703
1704         if (debug_level >= DEBUG_LEVEL_INFO)
1705                 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1706
1707         netif_stop_queue(dev);
1708
1709         /* shutdown adapter and release resources */
1710         shutdown(info);
1711
1712         hdlc_close(dev);
1713
1714         spin_lock_irqsave(&info->netlock, flags);
1715         info->netcount=0;
1716         spin_unlock_irqrestore(&info->netlock, flags);
1717
1718         return 0;
1719 }
1720
1721 /**
1722  * called by network layer to process IOCTL call to network device
1723  *
1724  * dev  pointer to network device structure
1725  * ifr  pointer to network interface request structure
1726  * cmd  IOCTL command code
1727  *
1728  * returns 0 if success, otherwise error code
1729  */
1730 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1731 {
1732         const size_t size = sizeof(sync_serial_settings);
1733         sync_serial_settings new_line;
1734         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1735         SLMP_INFO *info = dev_to_port(dev);
1736         unsigned int flags;
1737
1738         if (debug_level >= DEBUG_LEVEL_INFO)
1739                 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1740
1741         /* return error if TTY interface open */
1742         if (info->port.count)
1743                 return -EBUSY;
1744
1745         if (cmd != SIOCWANDEV)
1746                 return hdlc_ioctl(dev, ifr, cmd);
1747
1748         switch(ifr->ifr_settings.type) {
1749         case IF_GET_IFACE: /* return current sync_serial_settings */
1750
1751                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1752                 if (ifr->ifr_settings.size < size) {
1753                         ifr->ifr_settings.size = size; /* data size wanted */
1754                         return -ENOBUFS;
1755                 }
1756
1757                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1758                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1759                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1760                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1761
1762                 switch (flags){
1763                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1764                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1765                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1766                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1767                 default: new_line.clock_type = CLOCK_DEFAULT;
1768                 }
1769
1770                 new_line.clock_rate = info->params.clock_speed;
1771                 new_line.loopback   = info->params.loopback ? 1:0;
1772
1773                 if (copy_to_user(line, &new_line, size))
1774                         return -EFAULT;
1775                 return 0;
1776
1777         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1778
1779                 if(!capable(CAP_NET_ADMIN))
1780                         return -EPERM;
1781                 if (copy_from_user(&new_line, line, size))
1782                         return -EFAULT;
1783
1784                 switch (new_line.clock_type)
1785                 {
1786                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1787                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1788                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1789                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1790                 case CLOCK_DEFAULT:  flags = info->params.flags &
1791                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1792                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1793                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1794                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1795                 default: return -EINVAL;
1796                 }
1797
1798                 if (new_line.loopback != 0 && new_line.loopback != 1)
1799                         return -EINVAL;
1800
1801                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1802                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1803                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1804                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1805                 info->params.flags |= flags;
1806
1807                 info->params.loopback = new_line.loopback;
1808
1809                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1810                         info->params.clock_speed = new_line.clock_rate;
1811                 else
1812                         info->params.clock_speed = 0;
1813
1814                 /* if network interface up, reprogram hardware */
1815                 if (info->netcount)
1816                         program_hw(info);
1817                 return 0;
1818
1819         default:
1820                 return hdlc_ioctl(dev, ifr, cmd);
1821         }
1822 }
1823
1824 /**
1825  * called by network layer when transmit timeout is detected
1826  *
1827  * dev  pointer to network device structure
1828  */
1829 static void hdlcdev_tx_timeout(struct net_device *dev)
1830 {
1831         SLMP_INFO *info = dev_to_port(dev);
1832         unsigned long flags;
1833
1834         if (debug_level >= DEBUG_LEVEL_INFO)
1835                 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1836
1837         dev->stats.tx_errors++;
1838         dev->stats.tx_aborted_errors++;
1839
1840         spin_lock_irqsave(&info->lock,flags);
1841         tx_stop(info);
1842         spin_unlock_irqrestore(&info->lock,flags);
1843
1844         netif_wake_queue(dev);
1845 }
1846
1847 /**
1848  * called by device driver when transmit completes
1849  * reenable network layer transmit if stopped
1850  *
1851  * info  pointer to device instance information
1852  */
1853 static void hdlcdev_tx_done(SLMP_INFO *info)
1854 {
1855         if (netif_queue_stopped(info->netdev))
1856                 netif_wake_queue(info->netdev);
1857 }
1858
1859 /**
1860  * called by device driver when frame received
1861  * pass frame to network layer
1862  *
1863  * info  pointer to device instance information
1864  * buf   pointer to buffer contianing frame data
1865  * size  count of data bytes in buf
1866  */
1867 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1868 {
1869         struct sk_buff *skb = dev_alloc_skb(size);
1870         struct net_device *dev = info->netdev;
1871
1872         if (debug_level >= DEBUG_LEVEL_INFO)
1873                 printk("hdlcdev_rx(%s)\n",dev->name);
1874
1875         if (skb == NULL) {
1876                 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1877                        dev->name);
1878                 dev->stats.rx_dropped++;
1879                 return;
1880         }
1881
1882         memcpy(skb_put(skb, size), buf, size);
1883
1884         skb->protocol = hdlc_type_trans(skb, dev);
1885
1886         dev->stats.rx_packets++;
1887         dev->stats.rx_bytes += size;
1888
1889         netif_rx(skb);
1890 }
1891
1892 static const struct net_device_ops hdlcdev_ops = {
1893         .ndo_open       = hdlcdev_open,
1894         .ndo_stop       = hdlcdev_close,
1895         .ndo_change_mtu = hdlc_change_mtu,
1896         .ndo_start_xmit = hdlc_start_xmit,
1897         .ndo_do_ioctl   = hdlcdev_ioctl,
1898         .ndo_tx_timeout = hdlcdev_tx_timeout,
1899 };
1900
1901 /**
1902  * called by device driver when adding device instance
1903  * do generic HDLC initialization
1904  *
1905  * info  pointer to device instance information
1906  *
1907  * returns 0 if success, otherwise error code
1908  */
1909 static int hdlcdev_init(SLMP_INFO *info)
1910 {
1911         int rc;
1912         struct net_device *dev;
1913         hdlc_device *hdlc;
1914
1915         /* allocate and initialize network and HDLC layer objects */
1916
1917         if (!(dev = alloc_hdlcdev(info))) {
1918                 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1919                 return -ENOMEM;
1920         }
1921
1922         /* for network layer reporting purposes only */
1923         dev->mem_start = info->phys_sca_base;
1924         dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
1925         dev->irq       = info->irq_level;
1926
1927         /* network layer callbacks and settings */
1928         dev->netdev_ops     = &hdlcdev_ops;
1929         dev->watchdog_timeo = 10 * HZ;
1930         dev->tx_queue_len   = 50;
1931
1932         /* generic HDLC layer callbacks and settings */
1933         hdlc         = dev_to_hdlc(dev);
1934         hdlc->attach = hdlcdev_attach;
1935         hdlc->xmit   = hdlcdev_xmit;
1936
1937         /* register objects with HDLC layer */
1938         if ((rc = register_hdlc_device(dev))) {
1939                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1940                 free_netdev(dev);
1941                 return rc;
1942         }
1943
1944         info->netdev = dev;
1945         return 0;
1946 }
1947
1948 /**
1949  * called by device driver when removing device instance
1950  * do generic HDLC cleanup
1951  *
1952  * info  pointer to device instance information
1953  */
1954 static void hdlcdev_exit(SLMP_INFO *info)
1955 {
1956         unregister_hdlc_device(info->netdev);
1957         free_netdev(info->netdev);
1958         info->netdev = NULL;
1959 }
1960
1961 #endif /* CONFIG_HDLC */
1962
1963
1964 /* Return next bottom half action to perform.
1965  * Return Value:        BH action code or 0 if nothing to do.
1966  */
1967 static int bh_action(SLMP_INFO *info)
1968 {
1969         unsigned long flags;
1970         int rc = 0;
1971
1972         spin_lock_irqsave(&info->lock,flags);
1973
1974         if (info->pending_bh & BH_RECEIVE) {
1975                 info->pending_bh &= ~BH_RECEIVE;
1976                 rc = BH_RECEIVE;
1977         } else if (info->pending_bh & BH_TRANSMIT) {
1978                 info->pending_bh &= ~BH_TRANSMIT;
1979                 rc = BH_TRANSMIT;
1980         } else if (info->pending_bh & BH_STATUS) {
1981                 info->pending_bh &= ~BH_STATUS;
1982                 rc = BH_STATUS;
1983         }
1984
1985         if (!rc) {
1986                 /* Mark BH routine as complete */
1987                 info->bh_running = false;
1988                 info->bh_requested = false;
1989         }
1990
1991         spin_unlock_irqrestore(&info->lock,flags);
1992
1993         return rc;
1994 }
1995
1996 /* Perform bottom half processing of work items queued by ISR.
1997  */
1998 static void bh_handler(struct work_struct *work)
1999 {
2000         SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2001         int action;
2002
2003         if (!info)
2004                 return;
2005
2006         if ( debug_level >= DEBUG_LEVEL_BH )
2007                 printk( "%s(%d):%s bh_handler() entry\n",
2008                         __FILE__,__LINE__,info->device_name);
2009
2010         info->bh_running = true;
2011
2012         while((action = bh_action(info)) != 0) {
2013
2014                 /* Process work item */
2015                 if ( debug_level >= DEBUG_LEVEL_BH )
2016                         printk( "%s(%d):%s bh_handler() work item action=%d\n",
2017                                 __FILE__,__LINE__,info->device_name, action);
2018
2019                 switch (action) {
2020
2021                 case BH_RECEIVE:
2022                         bh_receive(info);
2023                         break;
2024                 case BH_TRANSMIT:
2025                         bh_transmit(info);
2026                         break;
2027                 case BH_STATUS:
2028                         bh_status(info);
2029                         break;
2030                 default:
2031                         /* unknown work item ID */
2032                         printk("%s(%d):%s Unknown work item ID=%08X!\n",
2033                                 __FILE__,__LINE__,info->device_name,action);
2034                         break;
2035                 }
2036         }
2037
2038         if ( debug_level >= DEBUG_LEVEL_BH )
2039                 printk( "%s(%d):%s bh_handler() exit\n",
2040                         __FILE__,__LINE__,info->device_name);
2041 }
2042
2043 static void bh_receive(SLMP_INFO *info)
2044 {
2045         if ( debug_level >= DEBUG_LEVEL_BH )
2046                 printk( "%s(%d):%s bh_receive()\n",
2047                         __FILE__,__LINE__,info->device_name);
2048
2049         while( rx_get_frame(info) );
2050 }
2051
2052 static void bh_transmit(SLMP_INFO *info)
2053 {
2054         struct tty_struct *tty = info->port.tty;
2055
2056         if ( debug_level >= DEBUG_LEVEL_BH )
2057                 printk( "%s(%d):%s bh_transmit() entry\n",
2058                         __FILE__,__LINE__,info->device_name);
2059
2060         if (tty)
2061                 tty_wakeup(tty);
2062 }
2063
2064 static void bh_status(SLMP_INFO *info)
2065 {
2066         if ( debug_level >= DEBUG_LEVEL_BH )
2067                 printk( "%s(%d):%s bh_status() entry\n",
2068                         __FILE__,__LINE__,info->device_name);
2069
2070         info->ri_chkcount = 0;
2071         info->dsr_chkcount = 0;
2072         info->dcd_chkcount = 0;
2073         info->cts_chkcount = 0;
2074 }
2075
2076 static void isr_timer(SLMP_INFO * info)
2077 {
2078         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2079
2080         /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2081         write_reg(info, IER2, 0);
2082
2083         /* TMCS, Timer Control/Status Register
2084          *
2085          * 07      CMF, Compare match flag (read only) 1=match
2086          * 06      ECMI, CMF Interrupt Enable: 0=disabled
2087          * 05      Reserved, must be 0
2088          * 04      TME, Timer Enable
2089          * 03..00  Reserved, must be 0
2090          *
2091          * 0000 0000
2092          */
2093         write_reg(info, (unsigned char)(timer + TMCS), 0);
2094
2095         info->irq_occurred = true;
2096
2097         if ( debug_level >= DEBUG_LEVEL_ISR )
2098                 printk("%s(%d):%s isr_timer()\n",
2099                         __FILE__,__LINE__,info->device_name);
2100 }
2101
2102 static void isr_rxint(SLMP_INFO * info)
2103 {
2104         struct tty_struct *tty = info->port.tty;
2105         struct  mgsl_icount *icount = &info->icount;
2106         unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2107         unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2108
2109         /* clear status bits */
2110         if (status)
2111                 write_reg(info, SR1, status);
2112
2113         if (status2)
2114                 write_reg(info, SR2, status2);
2115
2116         if ( debug_level >= DEBUG_LEVEL_ISR )
2117                 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2118                         __FILE__,__LINE__,info->device_name,status,status2);
2119
2120         if (info->params.mode == MGSL_MODE_ASYNC) {
2121                 if (status & BRKD) {
2122                         icount->brk++;
2123
2124                         /* process break detection if tty control
2125                          * is not set to ignore it
2126                          */
2127                         if ( tty ) {
2128                                 if (!(status & info->ignore_status_mask1)) {
2129                                         if (info->read_status_mask1 & BRKD) {
2130                                                 tty_insert_flip_char(tty, 0, TTY_BREAK);
2131                                                 if (info->port.flags & ASYNC_SAK)
2132                                                         do_SAK(tty);
2133                                         }
2134                                 }
2135                         }
2136                 }
2137         }
2138         else {
2139                 if (status & (FLGD|IDLD)) {
2140                         if (status & FLGD)
2141                                 info->icount.exithunt++;
2142                         else if (status & IDLD)
2143                                 info->icount.rxidle++;
2144                         wake_up_interruptible(&info->event_wait_q);
2145                 }
2146         }
2147
2148         if (status & CDCD) {
2149                 /* simulate a common modem status change interrupt
2150                  * for our handler
2151                  */
2152                 get_signals( info );
2153                 isr_io_pin(info,
2154                         MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2155         }
2156 }
2157
2158 /*
2159  * handle async rx data interrupts
2160  */
2161 static void isr_rxrdy(SLMP_INFO * info)
2162 {
2163         u16 status;
2164         unsigned char DataByte;
2165         struct tty_struct *tty = info->port.tty;
2166         struct  mgsl_icount *icount = &info->icount;
2167
2168         if ( debug_level >= DEBUG_LEVEL_ISR )
2169                 printk("%s(%d):%s isr_rxrdy\n",
2170                         __FILE__,__LINE__,info->device_name);
2171
2172         while((status = read_reg(info,CST0)) & BIT0)
2173         {
2174                 int flag = 0;
2175                 bool over = false;
2176                 DataByte = read_reg(info,TRB);
2177
2178                 icount->rx++;
2179
2180                 if ( status & (PE + FRME + OVRN) ) {
2181                         printk("%s(%d):%s rxerr=%04X\n",
2182                                 __FILE__,__LINE__,info->device_name,status);
2183
2184                         /* update error statistics */
2185                         if (status & PE)
2186                                 icount->parity++;
2187                         else if (status & FRME)
2188                                 icount->frame++;
2189                         else if (status & OVRN)
2190                                 icount->overrun++;
2191
2192                         /* discard char if tty control flags say so */
2193                         if (status & info->ignore_status_mask2)
2194                                 continue;
2195
2196                         status &= info->read_status_mask2;
2197
2198                         if ( tty ) {
2199                                 if (status & PE)
2200                                         flag = TTY_PARITY;
2201                                 else if (status & FRME)
2202                                         flag = TTY_FRAME;
2203                                 if (status & OVRN) {
2204                                         /* Overrun is special, since it's
2205                                          * reported immediately, and doesn't
2206                                          * affect the current character
2207                                          */
2208                                         over = true;
2209                                 }
2210                         }
2211                 }       /* end of if (error) */
2212
2213                 if ( tty ) {
2214                         tty_insert_flip_char(tty, DataByte, flag);
2215                         if (over)
2216                                 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2217                 }
2218         }
2219
2220         if ( debug_level >= DEBUG_LEVEL_ISR ) {
2221                 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2222                         __FILE__,__LINE__,info->device_name,
2223                         icount->rx,icount->brk,icount->parity,
2224                         icount->frame,icount->overrun);
2225         }
2226
2227         if ( tty )
2228                 tty_flip_buffer_push(tty);
2229 }
2230
2231 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2232 {
2233         if ( debug_level >= DEBUG_LEVEL_ISR )
2234                 printk("%s(%d):%s isr_txeom status=%02x\n",
2235                         __FILE__,__LINE__,info->device_name,status);
2236
2237         write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2238         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2239         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2240
2241         if (status & UDRN) {
2242                 write_reg(info, CMD, TXRESET);
2243                 write_reg(info, CMD, TXENABLE);
2244         } else
2245                 write_reg(info, CMD, TXBUFCLR);
2246
2247         /* disable and clear tx interrupts */
2248         info->ie0_value &= ~TXRDYE;
2249         info->ie1_value &= ~(IDLE + UDRN);
2250         write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2251         write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2252
2253         if ( info->tx_active ) {
2254                 if (info->params.mode != MGSL_MODE_ASYNC) {
2255                         if (status & UDRN)
2256                                 info->icount.txunder++;
2257                         else if (status & IDLE)
2258                                 info->icount.txok++;
2259                 }
2260
2261                 info->tx_active = false;
2262                 info->tx_count = info->tx_put = info->tx_get = 0;
2263
2264                 del_timer(&info->tx_timer);
2265
2266                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2267                         info->serial_signals &= ~SerialSignal_RTS;
2268                         info->drop_rts_on_tx_done = false;
2269                         set_signals(info);
2270                 }
2271
2272 #if SYNCLINK_GENERIC_HDLC
2273                 if (info->netcount)
2274                         hdlcdev_tx_done(info);
2275                 else
2276 #endif
2277                 {
2278                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2279                                 tx_stop(info);
2280                                 return;
2281                         }
2282                         info->pending_bh |= BH_TRANSMIT;
2283                 }
2284         }
2285 }
2286
2287
2288 /*
2289  * handle tx status interrupts
2290  */
2291 static void isr_txint(SLMP_INFO * info)
2292 {
2293         unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2294
2295         /* clear status bits */
2296         write_reg(info, SR1, status);
2297
2298         if ( debug_level >= DEBUG_LEVEL_ISR )
2299                 printk("%s(%d):%s isr_txint status=%02x\n",
2300                         __FILE__,__LINE__,info->device_name,status);
2301
2302         if (status & (UDRN + IDLE))
2303                 isr_txeom(info, status);
2304
2305         if (status & CCTS) {
2306                 /* simulate a common modem status change interrupt
2307                  * for our handler
2308                  */
2309                 get_signals( info );
2310                 isr_io_pin(info,
2311                         MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2312
2313         }
2314 }
2315
2316 /*
2317  * handle async tx data interrupts
2318  */
2319 static void isr_txrdy(SLMP_INFO * info)
2320 {
2321         if ( debug_level >= DEBUG_LEVEL_ISR )
2322                 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2323                         __FILE__,__LINE__,info->device_name,info->tx_count);
2324
2325         if (info->params.mode != MGSL_MODE_ASYNC) {
2326                 /* disable TXRDY IRQ, enable IDLE IRQ */
2327                 info->ie0_value &= ~TXRDYE;
2328                 info->ie1_value |= IDLE;
2329                 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2330                 return;
2331         }
2332
2333         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2334                 tx_stop(info);
2335                 return;
2336         }
2337
2338         if ( info->tx_count )
2339                 tx_load_fifo( info );
2340         else {
2341                 info->tx_active = false;
2342                 info->ie0_value &= ~TXRDYE;
2343                 write_reg(info, IE0, info->ie0_value);
2344         }
2345
2346         if (info->tx_count < WAKEUP_CHARS)
2347                 info->pending_bh |= BH_TRANSMIT;
2348 }
2349
2350 static void isr_rxdmaok(SLMP_INFO * info)
2351 {
2352         /* BIT7 = EOT (end of transfer)
2353          * BIT6 = EOM (end of message/frame)
2354          */
2355         unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2356
2357         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2358         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2359
2360         if ( debug_level >= DEBUG_LEVEL_ISR )
2361                 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2362                         __FILE__,__LINE__,info->device_name,status);
2363
2364         info->pending_bh |= BH_RECEIVE;
2365 }
2366
2367 static void isr_rxdmaerror(SLMP_INFO * info)
2368 {
2369         /* BIT5 = BOF (buffer overflow)
2370          * BIT4 = COF (counter overflow)
2371          */
2372         unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2373
2374         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2375         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2376
2377         if ( debug_level >= DEBUG_LEVEL_ISR )
2378                 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2379                         __FILE__,__LINE__,info->device_name,status);
2380
2381         info->rx_overflow = true;
2382         info->pending_bh |= BH_RECEIVE;
2383 }
2384
2385 static void isr_txdmaok(SLMP_INFO * info)
2386 {
2387         unsigned char status_reg1 = read_reg(info, SR1);
2388
2389         write_reg(info, TXDMA + DIR, 0x00);     /* disable Tx DMA IRQs */
2390         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2391         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2392
2393         if ( debug_level >= DEBUG_LEVEL_ISR )
2394                 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2395                         __FILE__,__LINE__,info->device_name,status_reg1);
2396
2397         /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2398         write_reg16(info, TRC0, 0);
2399         info->ie0_value |= TXRDYE;
2400         write_reg(info, IE0, info->ie0_value);
2401 }
2402
2403 static void isr_txdmaerror(SLMP_INFO * info)
2404 {
2405         /* BIT5 = BOF (buffer overflow)
2406          * BIT4 = COF (counter overflow)
2407          */
2408         unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2409
2410         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2411         write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2412
2413         if ( debug_level >= DEBUG_LEVEL_ISR )
2414                 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2415                         __FILE__,__LINE__,info->device_name,status);
2416 }
2417
2418 /* handle input serial signal changes
2419  */
2420 static void isr_io_pin( SLMP_INFO *info, u16 status )
2421 {
2422         struct  mgsl_icount *icount;
2423
2424         if ( debug_level >= DEBUG_LEVEL_ISR )
2425                 printk("%s(%d):isr_io_pin status=%04X\n",
2426                         __FILE__,__LINE__,status);
2427
2428         if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2429                       MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2430                 icount = &info->icount;
2431                 /* update input line counters */
2432                 if (status & MISCSTATUS_RI_LATCHED) {
2433                         icount->rng++;
2434                         if ( status & SerialSignal_RI )
2435                                 info->input_signal_events.ri_up++;
2436                         else
2437                                 info->input_signal_events.ri_down++;
2438                 }
2439                 if (status & MISCSTATUS_DSR_LATCHED) {
2440                         icount->dsr++;
2441                         if ( status & SerialSignal_DSR )
2442                                 info->input_signal_events.dsr_up++;
2443                         else
2444                                 info->input_signal_events.dsr_down++;
2445                 }
2446                 if (status & MISCSTATUS_DCD_LATCHED) {
2447                         if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2448                                 info->ie1_value &= ~CDCD;
2449                                 write_reg(info, IE1, info->ie1_value);
2450                         }
2451                         icount->dcd++;
2452                         if (status & SerialSignal_DCD) {
2453                                 info->input_signal_events.dcd_up++;
2454                         } else
2455                                 info->input_signal_events.dcd_down++;
2456 #if SYNCLINK_GENERIC_HDLC
2457                         if (info->netcount) {
2458                                 if (status & SerialSignal_DCD)
2459                                         netif_carrier_on(info->netdev);
2460                                 else
2461                                         netif_carrier_off(info->netdev);
2462                         }
2463 #endif
2464                 }
2465                 if (status & MISCSTATUS_CTS_LATCHED)
2466                 {
2467                         if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2468                                 info->ie1_value &= ~CCTS;
2469                                 write_reg(info, IE1, info->ie1_value);
2470                         }
2471                         icount->cts++;
2472                         if ( status & SerialSignal_CTS )
2473                                 info->input_signal_events.cts_up++;
2474                         else
2475                                 info->input_signal_events.cts_down++;
2476                 }
2477                 wake_up_interruptible(&info->status_event_wait_q);
2478                 wake_up_interruptible(&info->event_wait_q);
2479
2480                 if ( (info->port.flags & ASYNC_CHECK_CD) &&
2481                      (status & MISCSTATUS_DCD_LATCHED) ) {
2482                         if ( debug_level >= DEBUG_LEVEL_ISR )
2483                                 printk("%s CD now %s...", info->device_name,
2484                                        (status & SerialSignal_DCD) ? "on" : "off");
2485                         if (status & SerialSignal_DCD)
2486                                 wake_up_interruptible(&info->port.open_wait);
2487                         else {
2488                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2489                                         printk("doing serial hangup...");
2490                                 if (info->port.tty)
2491                                         tty_hangup(info->port.tty);
2492                         }
2493                 }
2494
2495                 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
2496                      (status & MISCSTATUS_CTS_LATCHED) ) {
2497                         if ( info->port.tty ) {
2498                                 if (info->port.tty->hw_stopped) {
2499                                         if (status & SerialSignal_CTS) {
2500                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2501                                                         printk("CTS tx start...");
2502                                                 info->port.tty->hw_stopped = 0;
2503                                                 tx_start(info);
2504                                                 info->pending_bh |= BH_TRANSMIT;
2505                                                 return;
2506                                         }
2507                                 } else {
2508                                         if (!(status & SerialSignal_CTS)) {
2509                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2510                                                         printk("CTS tx stop...");
2511                                                 info->port.tty->hw_stopped = 1;
2512                                                 tx_stop(info);
2513                                         }
2514                                 }
2515                         }
2516                 }
2517         }
2518
2519         info->pending_bh |= BH_STATUS;
2520 }
2521
2522 /* Interrupt service routine entry point.
2523  *
2524  * Arguments:
2525  *      irq             interrupt number that caused interrupt
2526  *      dev_id          device ID supplied during interrupt registration
2527  *      regs            interrupted processor context
2528  */
2529 static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2530 {
2531         SLMP_INFO *info = dev_id;
2532         unsigned char status, status0, status1=0;
2533         unsigned char dmastatus, dmastatus0, dmastatus1=0;
2534         unsigned char timerstatus0, timerstatus1=0;
2535         unsigned char shift;
2536         unsigned int i;
2537         unsigned short tmp;
2538
2539         if ( debug_level >= DEBUG_LEVEL_ISR )
2540                 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2541                         __FILE__, __LINE__, info->irq_level);
2542
2543         spin_lock(&info->lock);
2544
2545         for(;;) {
2546
2547                 /* get status for SCA0 (ports 0-1) */
2548                 tmp = read_reg16(info, ISR0);   /* get ISR0 and ISR1 in one read */
2549                 status0 = (unsigned char)tmp;
2550                 dmastatus0 = (unsigned char)(tmp>>8);
2551                 timerstatus0 = read_reg(info, ISR2);
2552
2553                 if ( debug_level >= DEBUG_LEVEL_ISR )
2554                         printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2555                                 __FILE__, __LINE__, info->device_name,
2556                                 status0, dmastatus0, timerstatus0);
2557
2558                 if (info->port_count == 4) {
2559                         /* get status for SCA1 (ports 2-3) */
2560                         tmp = read_reg16(info->port_array[2], ISR0);
2561                         status1 = (unsigned char)tmp;
2562                         dmastatus1 = (unsigned char)(tmp>>8);
2563                         timerstatus1 = read_reg(info->port_array[2], ISR2);
2564
2565                         if ( debug_level >= DEBUG_LEVEL_ISR )
2566                                 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2567                                         __FILE__,__LINE__,info->device_name,
2568                                         status1,dmastatus1,timerstatus1);
2569                 }
2570
2571                 if (!status0 && !dmastatus0 && !timerstatus0 &&
2572                          !status1 && !dmastatus1 && !timerstatus1)
2573                         break;
2574
2575                 for(i=0; i < info->port_count ; i++) {
2576                         if (info->port_array[i] == NULL)
2577                                 continue;
2578                         if (i < 2) {
2579                                 status = status0;
2580                                 dmastatus = dmastatus0;
2581                         } else {
2582                                 status = status1;
2583                                 dmastatus = dmastatus1;
2584                         }
2585
2586                         shift = i & 1 ? 4 :0;
2587
2588                         if (status & BIT0 << shift)
2589                                 isr_rxrdy(info->port_array[i]);
2590                         if (status & BIT1 << shift)
2591                                 isr_txrdy(info->port_array[i]);
2592                         if (status & BIT2 << shift)
2593                                 isr_rxint(info->port_array[i]);
2594                         if (status & BIT3 << shift)
2595                                 isr_txint(info->port_array[i]);
2596
2597                         if (dmastatus & BIT0 << shift)
2598                                 isr_rxdmaerror(info->port_array[i]);
2599                         if (dmastatus & BIT1 << shift)
2600                                 isr_rxdmaok(info->port_array[i]);
2601                         if (dmastatus & BIT2 << shift)
2602                                 isr_txdmaerror(info->port_array[i]);
2603                         if (dmastatus & BIT3 << shift)
2604                                 isr_txdmaok(info->port_array[i]);
2605                 }
2606
2607                 if (timerstatus0 & (BIT5 | BIT4))
2608                         isr_timer(info->port_array[0]);
2609                 if (timerstatus0 & (BIT7 | BIT6))
2610                         isr_timer(info->port_array[1]);
2611                 if (timerstatus1 & (BIT5 | BIT4))
2612                         isr_timer(info->port_array[2]);
2613                 if (timerstatus1 & (BIT7 | BIT6))
2614                         isr_timer(info->port_array[3]);
2615         }
2616
2617         for(i=0; i < info->port_count ; i++) {
2618                 SLMP_INFO * port = info->port_array[i];
2619
2620                 /* Request bottom half processing if there's something
2621                  * for it to do and the bh is not already running.
2622                  *
2623                  * Note: startup adapter diags require interrupts.
2624                  * do not request bottom half processing if the
2625                  * device is not open in a normal mode.
2626                  */
2627                 if ( port && (port->port.count || port->netcount) &&
2628                      port->pending_bh && !port->bh_running &&
2629                      !port->bh_requested ) {
2630                         if ( debug_level >= DEBUG_LEVEL_ISR )
2631                                 printk("%s(%d):%s queueing bh task.\n",
2632                                         __FILE__,__LINE__,port->device_name);
2633                         schedule_work(&port->task);
2634                         port->bh_requested = true;
2635                 }
2636         }
2637
2638         spin_unlock(&info->lock);
2639
2640         if ( debug_level >= DEBUG_LEVEL_ISR )
2641                 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2642                         __FILE__, __LINE__, info->irq_level);
2643         return IRQ_HANDLED;
2644 }
2645
2646 /* Initialize and start device.
2647  */
2648 static int startup(SLMP_INFO * info)
2649 {
2650         if ( debug_level >= DEBUG_LEVEL_INFO )
2651                 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2652
2653         if (info->port.flags & ASYNC_INITIALIZED)
2654                 return 0;
2655
2656         if (!info->tx_buf) {
2657                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2658                 if (!info->tx_buf) {
2659                         printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2660                                 __FILE__,__LINE__,info->device_name);
2661                         return -ENOMEM;
2662                 }
2663         }
2664
2665         info->pending_bh = 0;
2666
2667         memset(&info->icount, 0, sizeof(info->icount));
2668
2669         /* program hardware for current parameters */
2670         reset_port(info);
2671
2672         change_params(info);
2673
2674         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2675
2676         if (info->port.tty)
2677                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2678
2679         info->port.flags |= ASYNC_INITIALIZED;
2680
2681         return 0;
2682 }
2683
2684 /* Called by close() and hangup() to shutdown hardware
2685  */
2686 static void shutdown(SLMP_INFO * info)
2687 {
2688         unsigned long flags;
2689
2690         if (!(info->port.flags & ASYNC_INITIALIZED))
2691                 return;
2692
2693         if (debug_level >= DEBUG_LEVEL_INFO)
2694                 printk("%s(%d):%s synclinkmp_shutdown()\n",
2695                          __FILE__,__LINE__, info->device_name );
2696
2697         /* clear status wait queue because status changes */
2698         /* can't happen after shutting down the hardware */
2699         wake_up_interruptible(&info->status_event_wait_q);
2700         wake_up_interruptible(&info->event_wait_q);
2701
2702         del_timer(&info->tx_timer);
2703         del_timer(&info->status_timer);
2704
2705         kfree(info->tx_buf);
2706         info->tx_buf = NULL;
2707
2708         spin_lock_irqsave(&info->lock,flags);
2709
2710         reset_port(info);
2711
2712         if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2713                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2714                 set_signals(info);
2715         }
2716
2717         spin_unlock_irqrestore(&info->lock,flags);
2718
2719         if (info->port.tty)
2720                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2721
2722         info->port.flags &= ~ASYNC_INITIALIZED;
2723 }
2724
2725 static void program_hw(SLMP_INFO *info)
2726 {
2727         unsigned long flags;
2728
2729         spin_lock_irqsave(&info->lock,flags);
2730
2731         rx_stop(info);
2732         tx_stop(info);
2733
2734         info->tx_count = info->tx_put = info->tx_get = 0;
2735
2736         if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2737                 hdlc_mode(info);
2738         else
2739                 async_mode(info);
2740
2741         set_signals(info);
2742
2743         info->dcd_chkcount = 0;
2744         info->cts_chkcount = 0;
2745         info->ri_chkcount = 0;
2746         info->dsr_chkcount = 0;
2747
2748         info->ie1_value |= (CDCD|CCTS);
2749         write_reg(info, IE1, info->ie1_value);
2750
2751         get_signals(info);
2752
2753         if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
2754                 rx_start(info);
2755
2756         spin_unlock_irqrestore(&info->lock,flags);
2757 }
2758
2759 /* Reconfigure adapter based on new parameters
2760  */
2761 static void change_params(SLMP_INFO *info)
2762 {
2763         unsigned cflag;
2764         int bits_per_char;
2765
2766         if (!info->port.tty || !info->port.tty->termios)
2767                 return;
2768
2769         if (debug_level >= DEBUG_LEVEL_INFO)
2770                 printk("%s(%d):%s change_params()\n",
2771                          __FILE__,__LINE__, info->device_name );
2772
2773         cflag = info->port.tty->termios->c_cflag;
2774
2775         /* if B0 rate (hangup) specified then negate DTR and RTS */
2776         /* otherwise assert DTR and RTS */
2777         if (cflag & CBAUD)
2778                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2779         else
2780                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2781
2782         /* byte size and parity */
2783
2784         switch (cflag & CSIZE) {
2785               case CS5: info->params.data_bits = 5; break;
2786               case CS6: info->params.data_bits = 6; break;
2787               case CS7: info->params.data_bits = 7; break;
2788               case CS8: info->params.data_bits = 8; break;
2789               /* Never happens, but GCC is too dumb to figure it out */
2790               default:  info->params.data_bits = 7; break;
2791               }
2792
2793         if (cflag & CSTOPB)
2794                 info->params.stop_bits = 2;
2795         else
2796                 info->params.stop_bits = 1;
2797
2798         info->params.parity = ASYNC_PARITY_NONE;
2799         if (cflag & PARENB) {
2800                 if (cflag & PARODD)
2801                         info->params.parity = ASYNC_PARITY_ODD;
2802                 else
2803                         info->params.parity = ASYNC_PARITY_EVEN;
2804 #ifdef CMSPAR
2805                 if (cflag & CMSPAR)
2806                         info->params.parity = ASYNC_PARITY_SPACE;
2807 #endif
2808         }
2809
2810         /* calculate number of jiffies to transmit a full
2811          * FIFO (32 bytes) at specified data rate
2812          */
2813         bits_per_char = info->params.data_bits +
2814                         info->params.stop_bits + 1;
2815
2816         /* if port data rate is set to 460800 or less then
2817          * allow tty settings to override, otherwise keep the
2818          * current data rate.
2819          */
2820         if (info->params.data_rate <= 460800) {
2821                 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2822         }
2823
2824         if ( info->params.data_rate ) {
2825                 info->timeout = (32*HZ*bits_per_char) /
2826                                 info->params.data_rate;
2827         }
2828         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2829
2830         if (cflag & CRTSCTS)
2831                 info->port.flags |= ASYNC_CTS_FLOW;
2832         else
2833                 info->port.flags &= ~ASYNC_CTS_FLOW;
2834
2835         if (cflag & CLOCAL)
2836                 info->port.flags &= ~ASYNC_CHECK_CD;
2837         else
2838                 info->port.flags |= ASYNC_CHECK_CD;
2839
2840         /* process tty input control flags */
2841
2842         info->read_status_mask2 = OVRN;
2843         if (I_INPCK(info->port.tty))
2844                 info->read_status_mask2 |= PE | FRME;
2845         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2846                 info->read_status_mask1 |= BRKD;
2847         if (I_IGNPAR(info->port.tty))
2848                 info->ignore_status_mask2 |= PE | FRME;
2849         if (I_IGNBRK(info->port.tty)) {
2850                 info->ignore_status_mask1 |= BRKD;
2851                 /* If ignoring parity and break indicators, ignore
2852                  * overruns too.  (For real raw support).
2853                  */
2854                 if (I_IGNPAR(info->port.tty))
2855                         info->ignore_status_mask2 |= OVRN;
2856         }
2857
2858         program_hw(info);
2859 }
2860
2861 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2862 {
2863         int err;
2864
2865         if (debug_level >= DEBUG_LEVEL_INFO)
2866                 printk("%s(%d):%s get_params()\n",
2867                          __FILE__,__LINE__, info->device_name);
2868
2869         if (!user_icount) {
2870                 memset(&info->icount, 0, sizeof(info->icount));
2871         } else {
2872                 mutex_lock(&info->port.mutex);
2873                 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2874                 mutex_unlock(&info->port.mutex);
2875                 if (err)
2876                         return -EFAULT;
2877         }
2878
2879         return 0;
2880 }
2881
2882 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2883 {
2884         int err;
2885         if (debug_level >= DEBUG_LEVEL_INFO)
2886                 printk("%s(%d):%s get_params()\n",
2887                          __FILE__,__LINE__, info->device_name);
2888
2889         mutex_lock(&info->port.mutex);
2890         COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2891         mutex_unlock(&info->port.mutex);
2892         if (err) {
2893                 if ( debug_level >= DEBUG_LEVEL_INFO )
2894                         printk( "%s(%d):%s get_params() user buffer copy failed\n",
2895                                 __FILE__,__LINE__,info->device_name);
2896                 return -EFAULT;
2897         }
2898
2899         return 0;
2900 }
2901
2902 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2903 {
2904         unsigned long flags;
2905         MGSL_PARAMS tmp_params;
2906         int err;
2907
2908         if (debug_level >= DEBUG_LEVEL_INFO)
2909                 printk("%s(%d):%s set_params\n",
2910                         __FILE__,__LINE__,info->device_name );
2911         COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2912         if (err) {
2913                 if ( debug_level >= DEBUG_LEVEL_INFO )
2914                         printk( "%s(%d):%s set_params() user buffer copy failed\n",
2915                                 __FILE__,__LINE__,info->device_name);
2916                 return -EFAULT;
2917         }
2918
2919         mutex_lock(&info->port.mutex);
2920         spin_lock_irqsave(&info->lock,flags);
2921         memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2922         spin_unlock_irqrestore(&info->lock,flags);
2923
2924         change_params(info);
2925         mutex_unlock(&info->port.mutex);
2926
2927         return 0;
2928 }
2929
2930 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2931 {
2932         int err;
2933
2934         if (debug_level >= DEBUG_LEVEL_INFO)
2935                 printk("%s(%d):%s get_txidle()=%d\n",
2936                          __FILE__,__LINE__, info->device_name, info->idle_mode);
2937
2938         COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2939         if (err) {
2940                 if ( debug_level >= DEBUG_LEVEL_INFO )
2941                         printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2942                                 __FILE__,__LINE__,info->device_name);
2943                 return -EFAULT;
2944         }
2945
2946         return 0;
2947 }
2948
2949 static int set_txidle(SLMP_INFO * info, int idle_mode)
2950 {
2951         unsigned long flags;
2952
2953         if (debug_level >= DEBUG_LEVEL_INFO)
2954                 printk("%s(%d):%s set_txidle(%d)\n",
2955                         __FILE__,__LINE__,info->device_name, idle_mode );
2956
2957         spin_lock_irqsave(&info->lock,flags);
2958         info->idle_mode = idle_mode;
2959         tx_set_idle( info );
2960         spin_unlock_irqrestore(&info->lock,flags);
2961         return 0;
2962 }
2963
2964 static int tx_enable(SLMP_INFO * info, int enable)
2965 {
2966         unsigned long flags;
2967
2968         if (debug_level >= DEBUG_LEVEL_INFO)
2969                 printk("%s(%d):%s tx_enable(%d)\n",
2970                         __FILE__,__LINE__,info->device_name, enable);
2971
2972         spin_lock_irqsave(&info->lock,flags);
2973         if ( enable ) {
2974                 if ( !info->tx_enabled ) {
2975                         tx_start(info);
2976                 }
2977         } else {
2978                 if ( info->tx_enabled )
2979                         tx_stop(info);
2980         }
2981         spin_unlock_irqrestore(&info->lock,flags);
2982         return 0;
2983 }
2984
2985 /* abort send HDLC frame
2986  */
2987 static int tx_abort(SLMP_INFO * info)
2988 {
2989         unsigned long flags;
2990
2991         if (debug_level >= DEBUG_LEVEL_INFO)
2992                 printk("%s(%d):%s tx_abort()\n",
2993                         __FILE__,__LINE__,info->device_name);
2994
2995         spin_lock_irqsave(&info->lock,flags);
2996         if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2997                 info->ie1_value &= ~UDRN;
2998                 info->ie1_value |= IDLE;
2999                 write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
3000                 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
3001
3002                 write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
3003                 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3004
3005                 write_reg(info, CMD, TXABORT);
3006         }
3007         spin_unlock_irqrestore(&info->lock,flags);
3008         return 0;
3009 }
3010
3011 static int rx_enable(SLMP_INFO * info, int enable)
3012 {
3013         unsigned long flags;
3014
3015         if (debug_level >= DEBUG_LEVEL_INFO)
3016                 printk("%s(%d):%s rx_enable(%d)\n",
3017                         __FILE__,__LINE__,info->device_name,enable);
3018
3019         spin_lock_irqsave(&info->lock,flags);
3020         if ( enable ) {
3021                 if ( !info->rx_enabled )
3022                         rx_start(info);
3023         } else {
3024                 if ( info->rx_enabled )
3025                         rx_stop(info);
3026         }
3027         spin_unlock_irqrestore(&info->lock,flags);
3028         return 0;
3029 }
3030
3031 /* wait for specified event to occur
3032  */
3033 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3034 {
3035         unsigned long flags;
3036         int s;
3037         int rc=0;
3038         struct mgsl_icount cprev, cnow;
3039         int events;
3040         int mask;
3041         struct  _input_signal_events oldsigs, newsigs;
3042         DECLARE_WAITQUEUE(wait, current);
3043
3044         COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3045         if (rc) {
3046                 return  -EFAULT;
3047         }
3048
3049         if (debug_level >= DEBUG_LEVEL_INFO)
3050                 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3051                         __FILE__,__LINE__,info->device_name,mask);
3052
3053         spin_lock_irqsave(&info->lock,flags);
3054
3055         /* return immediately if state matches requested events */
3056         get_signals(info);
3057         s = info->serial_signals;
3058
3059         events = mask &
3060                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3061                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3062                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3063                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3064         if (events) {
3065                 spin_unlock_irqrestore(&info->lock,flags);
3066                 goto exit;
3067         }
3068
3069         /* save current irq counts */
3070         cprev = info->icount;
3071         oldsigs = info->input_signal_events;
3072
3073         /* enable hunt and idle irqs if needed */
3074         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3075                 unsigned char oldval = info->ie1_value;
3076                 unsigned char newval = oldval +
3077                          (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3078                          (mask & MgslEvent_IdleReceived ? IDLD:0);
3079                 if ( oldval != newval ) {
3080                         info->ie1_value = newval;
3081                         write_reg(info, IE1, info->ie1_value);
3082                 }
3083         }
3084
3085         set_current_state(TASK_INTERRUPTIBLE);
3086         add_wait_queue(&info->event_wait_q, &wait);
3087
3088         spin_unlock_irqrestore(&info->lock,flags);
3089
3090         for(;;) {
3091                 schedule();
3092                 if (signal_pending(current)) {
3093                         rc = -ERESTARTSYS;
3094                         break;
3095                 }
3096
3097                 /* get current irq counts */
3098                 spin_lock_irqsave(&info->lock,flags);
3099                 cnow = info->icount;
3100                 newsigs = info->input_signal_events;
3101                 set_current_state(TASK_INTERRUPTIBLE);
3102                 spin_unlock_irqrestore(&info->lock,flags);
3103
3104                 /* if no change, wait aborted for some reason */
3105                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
3106                     newsigs.dsr_down == oldsigs.dsr_down &&
3107                     newsigs.dcd_up   == oldsigs.dcd_up   &&
3108                     newsigs.dcd_down == oldsigs.dcd_down &&
3109                     newsigs.cts_up   == oldsigs.cts_up   &&
3110                     newsigs.cts_down == oldsigs.cts_down &&
3111                     newsigs.ri_up    == oldsigs.ri_up    &&
3112                     newsigs.ri_down  == oldsigs.ri_down  &&
3113                     cnow.exithunt    == cprev.exithunt   &&
3114                     cnow.rxidle      == cprev.rxidle) {
3115                         rc = -EIO;
3116                         break;
3117                 }
3118
3119                 events = mask &
3120                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
3121                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3122                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
3123                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3124                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
3125                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3126                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
3127                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
3128                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
3129                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
3130                 if (events)
3131                         break;
3132
3133                 cprev = cnow;
3134                 oldsigs = newsigs;
3135         }
3136
3137         remove_wait_queue(&info->event_wait_q, &wait);
3138         set_current_state(TASK_RUNNING);
3139
3140
3141         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3142                 spin_lock_irqsave(&info->lock,flags);
3143                 if (!waitqueue_active(&info->event_wait_q)) {
3144                         /* disable enable exit hunt mode/idle rcvd IRQs */
3145                         info->ie1_value &= ~(FLGD|IDLD);
3146                         write_reg(info, IE1, info->ie1_value);
3147                 }
3148                 spin_unlock_irqrestore(&info->lock,flags);
3149         }
3150 exit:
3151         if ( rc == 0 )
3152                 PUT_USER(rc, events, mask_ptr);
3153
3154         return rc;
3155 }
3156
3157 static int modem_input_wait(SLMP_INFO *info,int arg)
3158 {
3159         unsigned long flags;
3160         int rc;
3161         struct mgsl_icount cprev, cnow;
3162         DECLARE_WAITQUEUE(wait, current);
3163
3164         /* save current irq counts */
3165         spin_lock_irqsave(&info->lock,flags);
3166         cprev = info->icount;
3167         add_wait_queue(&info->status_event_wait_q, &wait);
3168         set_current_state(TASK_INTERRUPTIBLE);
3169         spin_unlock_irqrestore(&info->lock,flags);
3170
3171         for(;;) {
3172                 schedule();
3173                 if (signal_pending(current)) {
3174                         rc = -ERESTARTSYS;
3175                         break;
3176                 }
3177
3178                 /* get new irq counts */
3179                 spin_lock_irqsave(&info->lock,flags);
3180                 cnow = info->icount;
3181                 set_current_state(TASK_INTERRUPTIBLE);
3182                 spin_unlock_irqrestore(&info->lock,flags);
3183
3184                 /* if no change, wait aborted for some reason */
3185                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3186                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3187                         rc = -EIO;
3188                         break;
3189                 }
3190
3191                 /* check for change in caller specified modem input */
3192                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3193                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3194                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3195                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3196                         rc = 0;
3197                         break;
3198                 }
3199
3200                 cprev = cnow;
3201         }
3202         remove_wait_queue(&info->status_event_wait_q, &wait);
3203         set_current_state(TASK_RUNNING);
3204         return rc;
3205 }
3206
3207 /* return the state of the serial control and status signals
3208  */
3209 static int tiocmget(struct tty_struct *tty)
3210 {
3211         SLMP_INFO *info = tty->driver_data;
3212         unsigned int result;
3213         unsigned long flags;
3214
3215         spin_lock_irqsave(&info->lock,flags);
3216         get_signals(info);
3217         spin_unlock_irqrestore(&info->lock,flags);
3218
3219         result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3220                 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3221                 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3222                 ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
3223                 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3224                 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3225
3226         if (debug_level >= DEBUG_LEVEL_INFO)
3227                 printk("%s(%d):%s tiocmget() value=%08X\n",
3228                          __FILE__,__LINE__, info->device_name, result );
3229         return result;
3230 }
3231
3232 /* set modem control signals (DTR/RTS)
3233  */
3234 static int tiocmset(struct tty_struct *tty,
3235                                         unsigned int set, unsigned int clear)
3236 {
3237         SLMP_INFO *info = tty->driver_data;
3238         unsigned long flags;
3239
3240         if (debug_level >= DEBUG_LEVEL_INFO)
3241                 printk("%s(%d):%s tiocmset(%x,%x)\n",
3242                         __FILE__,__LINE__,info->device_name, set, clear);
3243
3244         if (set & TIOCM_RTS)
3245                 info->serial_signals |= SerialSignal_RTS;
3246         if (set & TIOCM_DTR)
3247                 info->serial_signals |= SerialSignal_DTR;
3248         if (clear & TIOCM_RTS)
3249                 info->serial_signals &= ~SerialSignal_RTS;
3250         if (clear & TIOCM_DTR)
3251                 info->serial_signals &= ~SerialSignal_DTR;
3252
3253         spin_lock_irqsave(&info->lock,flags);
3254         set_signals(info);
3255         spin_unlock_irqrestore(&info->lock,flags);
3256
3257         return 0;
3258 }
3259
3260 static int carrier_raised(struct tty_port *port)
3261 {
3262         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3263         unsigned long flags;
3264
3265         spin_lock_irqsave(&info->lock,flags);
3266         get_signals(info);
3267         spin_unlock_irqrestore(&info->lock,flags);
3268
3269         return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3270 }
3271
3272 static void dtr_rts(struct tty_port *port, int on)
3273 {
3274         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3275         unsigned long flags;
3276
3277         spin_lock_irqsave(&info->lock,flags);
3278         if (on)
3279                 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3280         else
3281                 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3282         set_signals(info);
3283         spin_unlock_irqrestore(&info->lock,flags);
3284 }
3285
3286 /* Block the current process until the specified port is ready to open.
3287  */
3288 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3289                            SLMP_INFO *info)
3290 {
3291         DECLARE_WAITQUEUE(wait, current);
3292         int             retval;
3293         bool            do_clocal = false;
3294         bool            extra_count = false;
3295         unsigned long   flags;
3296         int             cd;
3297         struct tty_port *port = &info->port;
3298
3299         if (debug_level >= DEBUG_LEVEL_INFO)
3300                 printk("%s(%d):%s block_til_ready()\n",
3301                          __FILE__,__LINE__, tty->driver->name );
3302
3303         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3304                 /* nonblock mode is set or port is not enabled */
3305                 /* just verify that callout device is not active */
3306                 port->flags |= ASYNC_NORMAL_ACTIVE;
3307                 return 0;
3308         }
3309
3310         if (tty->termios->c_cflag & CLOCAL)
3311                 do_clocal = true;
3312
3313         /* Wait for carrier detect and the line to become
3314          * free (i.e., not in use by the callout).  While we are in
3315          * this loop, port->count is dropped by one, so that
3316          * close() knows when to free things.  We restore it upon
3317          * exit, either normal or abnormal.
3318          */
3319
3320         retval = 0;
3321         add_wait_queue(&port->open_wait, &wait);
3322
3323         if (debug_level >= DEBUG_LEVEL_INFO)
3324                 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3325                          __FILE__,__LINE__, tty->driver->name, port->count );
3326
3327         spin_lock_irqsave(&info->lock, flags);
3328         if (!tty_hung_up_p(filp)) {
3329                 extra_count = true;
3330                 port->count--;
3331         }
3332         spin_unlock_irqrestore(&info->lock, flags);
3333         port->blocked_open++;
3334
3335         while (1) {
3336                 if (tty->termios->c_cflag & CBAUD)
3337                         tty_port_raise_dtr_rts(port);
3338
3339                 set_current_state(TASK_INTERRUPTIBLE);
3340
3341                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3342                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3343                                         -EAGAIN : -ERESTARTSYS;
3344                         break;
3345                 }
3346
3347                 cd = tty_port_carrier_raised(port);
3348
3349                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3350                         break;
3351
3352                 if (signal_pending(current)) {
3353                         retval = -ERESTARTSYS;
3354                         break;
3355                 }
3356
3357                 if (debug_level >= DEBUG_LEVEL_INFO)
3358                         printk("%s(%d):%s block_til_ready() count=%d\n",
3359                                  __FILE__,__LINE__, tty->driver->name, port->count );
3360
3361                 tty_unlock();
3362                 schedule();
3363                 tty_lock();
3364         }
3365
3366         set_current_state(TASK_RUNNING);
3367         remove_wait_queue(&port->open_wait, &wait);
3368
3369         if (extra_count)
3370                 port->count++;
3371         port->blocked_open--;
3372
3373         if (debug_level >= DEBUG_LEVEL_INFO)
3374                 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3375                          __FILE__,__LINE__, tty->driver->name, port->count );
3376
3377         if (!retval)
3378                 port->flags |= ASYNC_NORMAL_ACTIVE;
3379
3380         return retval;
3381 }
3382
3383 static int alloc_dma_bufs(SLMP_INFO *info)
3384 {
3385         unsigned short BuffersPerFrame;
3386         unsigned short BufferCount;
3387
3388         // Force allocation to start at 64K boundary for each port.
3389         // This is necessary because *all* buffer descriptors for a port
3390         // *must* be in the same 64K block. All descriptors on a port
3391         // share a common 'base' address (upper 8 bits of 24 bits) programmed
3392         // into the CBP register.
3393         info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3394
3395         /* Calculate the number of DMA buffers necessary to hold the */
3396         /* largest allowable frame size. Note: If the max frame size is */
3397         /* not an even multiple of the DMA buffer size then we need to */
3398         /* round the buffer count per frame up one. */
3399
3400         BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3401         if ( info->max_frame_size % SCABUFSIZE )
3402                 BuffersPerFrame++;
3403
3404         /* calculate total number of data buffers (SCABUFSIZE) possible
3405          * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3406          * for the descriptor list (BUFFERLISTSIZE).
3407          */
3408         BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3409
3410         /* limit number of buffers to maximum amount of descriptors */
3411         if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3412                 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3413
3414         /* use enough buffers to transmit one max size frame */
3415         info->tx_buf_count = BuffersPerFrame + 1;
3416
3417         /* never use more than half the available buffers for transmit */
3418         if (info->tx_buf_count > (BufferCount/2))
3419                 info->tx_buf_count = BufferCount/2;
3420
3421         if (info->tx_buf_count > SCAMAXDESC)
3422                 info->tx_buf_count = SCAMAXDESC;
3423
3424         /* use remaining buffers for receive */
3425         info->rx_buf_count = BufferCount - info->tx_buf_count;
3426
3427         if (info->rx_buf_count > SCAMAXDESC)
3428                 info->rx_buf_count = SCAMAXDESC;
3429
3430         if ( debug_level >= DEBUG_LEVEL_INFO )
3431                 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3432                         __FILE__,__LINE__, info->device_name,
3433                         info->tx_buf_count,info->rx_buf_count);
3434
3435         if ( alloc_buf_list( info ) < 0 ||
3436                 alloc_frame_bufs(info,
3437                                         info->rx_buf_list,
3438                                         info->rx_buf_list_ex,
3439                                         info->rx_buf_count) < 0 ||
3440                 alloc_frame_bufs(info,
3441                                         info->tx_buf_list,
3442                                         info->tx_buf_list_ex,
3443                                         info->tx_buf_count) < 0 ||
3444                 alloc_tmp_rx_buf(info) < 0 ) {
3445                 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3446                         __FILE__,__LINE__, info->device_name);
3447                 return -ENOMEM;
3448         }
3449
3450         rx_reset_buffers( info );
3451
3452         return 0;
3453 }
3454
3455 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3456  */
3457 static int alloc_buf_list(SLMP_INFO *info)
3458 {
3459         unsigned int i;
3460
3461         /* build list in adapter shared memory */
3462         info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3463         info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3464         info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3465
3466         memset(info->buffer_list, 0, BUFFERLISTSIZE);
3467
3468         /* Save virtual address pointers to the receive and */
3469         /* transmit buffer lists. (Receive 1st). These pointers will */
3470         /* be used by the processor to access the lists. */
3471         info->rx_buf_list = (SCADESC *)info->buffer_list;
3472
3473         info->tx_buf_list = (SCADESC *)info->buffer_list;
3474         info->tx_buf_list += info->rx_buf_count;
3475
3476         /* Build links for circular buffer entry lists (tx and rx)
3477          *
3478          * Note: links are physical addresses read by the SCA device
3479          * to determine the next buffer entry to use.
3480          */
3481
3482         for ( i = 0; i < info->rx_buf_count; i++ ) {
3483                 /* calculate and store physical address of this buffer entry */
3484                 info->rx_buf_list_ex[i].phys_entry =
3485                         info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3486
3487                 /* calculate and store physical address of */
3488                 /* next entry in cirular list of entries */
3489                 info->rx_buf_list[i].next = info->buffer_list_phys;
3490                 if ( i < info->rx_buf_count - 1 )
3491                         info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3492
3493                 info->rx_buf_list[i].length = SCABUFSIZE;
3494         }
3495
3496         for ( i = 0; i < info->tx_buf_count; i++ ) {
3497                 /* calculate and store physical address of this buffer entry */
3498                 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3499                         ((info->rx_buf_count + i) * sizeof(SCADESC));
3500
3501                 /* calculate and store physical address of */
3502                 /* next entry in cirular list of entries */
3503
3504                 info->tx_buf_list[i].next = info->buffer_list_phys +
3505                         info->rx_buf_count * sizeof(SCADESC);
3506
3507                 if ( i < info->tx_buf_count - 1 )
3508                         info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3509         }
3510
3511         return 0;
3512 }
3513
3514 /* Allocate the frame DMA buffers used by the specified buffer list.
3515  */
3516 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3517 {
3518         int i;
3519         unsigned long phys_addr;
3520
3521         for ( i = 0; i < count; i++ ) {
3522                 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3523                 phys_addr = info->port_array[0]->last_mem_alloc;
3524                 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3525
3526                 buf_list[i].buf_ptr  = (unsigned short)phys_addr;
3527                 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3528         }
3529
3530         return 0;
3531 }
3532
3533 static void free_dma_bufs(SLMP_INFO *info)
3534 {
3535         info->buffer_list = NULL;
3536         info->rx_buf_list = NULL;
3537         info->tx_buf_list = NULL;
3538 }
3539
3540 /* allocate buffer large enough to hold max_frame_size.
3541  * This buffer is used to pass an assembled frame to the line discipline.
3542  */
3543 static int alloc_tmp_rx_buf(SLMP_INFO *info)
3544 {
3545         info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3546         if (info->tmp_rx_buf == NULL)
3547                 return -ENOMEM;
3548         return 0;
3549 }
3550
3551 static void free_tmp_rx_buf(SLMP_INFO *info)
3552 {
3553         kfree(info->tmp_rx_buf);
3554         info->tmp_rx_buf = NULL;
3555 }
3556
3557 static int claim_resources(SLMP_INFO *info)
3558 {
3559         if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3560                 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3561                         __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3562                 info->init_error = DiagStatus_AddressConflict;
3563                 goto errout;
3564         }
3565         else
3566                 info->shared_mem_requested = true;
3567
3568         if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3569                 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3570                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3571                 info->init_error = DiagStatus_AddressConflict;
3572                 goto errout;
3573         }
3574         else
3575                 info->lcr_mem_requested = true;
3576
3577         if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3578                 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3579                         __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3580                 info->init_error = DiagStatus_AddressConflict;
3581                 goto errout;
3582         }
3583         else
3584                 info->sca_base_requested = true;
3585
3586         if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3587                 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3588                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3589                 info->init_error = DiagStatus_AddressConflict;
3590                 goto errout;
3591         }
3592         else
3593                 info->sca_statctrl_requested = true;
3594
3595         info->memory_base = ioremap_nocache(info->phys_memory_base,
3596                                                                 SCA_MEM_SIZE);
3597         if (!info->memory_base) {
3598                 printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3599                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3600                 info->init_error = DiagStatus_CantAssignPciResources;
3601                 goto errout;
3602         }
3603
3604         info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3605         if (!info->lcr_base) {
3606                 printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3607                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3608                 info->init_error = DiagStatus_CantAssignPciResources;
3609                 goto errout;
3610         }
3611         info->lcr_base += info->lcr_offset;
3612
3613         info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3614         if (!info->sca_base) {
3615                 printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3616                         __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3617                 info->init_error = DiagStatus_CantAssignPciResources;
3618                 goto errout;
3619         }
3620         info->sca_base += info->sca_offset;
3621
3622         info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3623                                                                 PAGE_SIZE);
3624         if (!info->statctrl_base) {
3625                 printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3626                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3627                 info->init_error = DiagStatus_CantAssignPciResources;
3628                 goto errout;
3629         }
3630         info->statctrl_base += info->statctrl_offset;
3631
3632         if ( !memory_test(info) ) {
3633                 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3634                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3635                 info->init_error = DiagStatus_MemoryError;
3636                 goto errout;
3637         }
3638
3639         return 0;
3640
3641 errout:
3642         release_resources( info );
3643         return -ENODEV;
3644 }
3645
3646 static void release_resources(SLMP_INFO *info)
3647 {
3648         if ( debug_level >= DEBUG_LEVEL_INFO )
3649                 printk( "%s(%d):%s release_resources() entry\n",
3650                         __FILE__,__LINE__,info->device_name );
3651
3652         if ( info->irq_requested ) {
3653                 free_irq(info->irq_level, info);
3654                 info->irq_requested = false;
3655         }
3656
3657         if ( info->shared_mem_requested ) {
3658                 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3659                 info->shared_mem_requested = false;
3660         }
3661         if ( info->lcr_mem_requested ) {
3662                 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3663                 info->lcr_mem_requested = false;
3664         }
3665         if ( info->sca_base_requested ) {
3666                 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3667                 info->sca_base_requested = false;
3668         }
3669         if ( info->sca_statctrl_requested ) {
3670                 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3671                 info->sca_statctrl_requested = false;
3672         }
3673
3674         if (info->memory_base){
3675                 iounmap(info->memory_base);
3676                 info->memory_base = NULL;
3677         }
3678
3679         if (info->sca_base) {
3680                 iounmap(info->sca_base - info->sca_offset);
3681                 info->sca_base=NULL;
3682         }
3683
3684         if (info->statctrl_base) {
3685                 iounmap(info->statctrl_base - info->statctrl_offset);
3686                 info->statctrl_base=NULL;
3687         }
3688
3689         if (info->lcr_base){
3690                 iounmap(info->lcr_base - info->lcr_offset);
3691                 info->lcr_base = NULL;
3692         }
3693
3694         if ( debug_level >= DEBUG_LEVEL_INFO )
3695                 printk( "%s(%d):%s release_resources() exit\n",
3696                         __FILE__,__LINE__,info->device_name );
3697 }
3698
3699 /* Add the specified device instance data structure to the
3700  * global linked list of devices and increment the device count.
3701  */
3702 static void add_device(SLMP_INFO *info)
3703 {
3704         info->next_device = NULL;
3705         info->line = synclinkmp_device_count;
3706         sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3707
3708         if (info->line < MAX_DEVICES) {
3709                 if (maxframe[info->line])
3710                         info->max_frame_size = maxframe[info->line];
3711         }
3712
3713         synclinkmp_device_count++;
3714
3715         if ( !synclinkmp_device_list )
3716                 synclinkmp_device_list = info;
3717         else {
3718                 SLMP_INFO *current_dev = synclinkmp_device_list;
3719                 while( current_dev->next_device )
3720                         current_dev = current_dev->next_device;
3721                 current_dev->next_device = info;
3722         }
3723
3724         if ( info->max_frame_size < 4096 )
3725                 info->max_frame_size = 4096;
3726         else if ( info->max_frame_size > 65535 )
3727                 info->max_frame_size = 65535;
3728
3729         printk( "SyncLink MultiPort %s: "
3730                 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3731                 info->device_name,
3732                 info->phys_sca_base,
3733                 info->phys_memory_base,
3734                 info->phys_statctrl_base,
3735                 info->phys_lcr_base,
3736                 info->irq_level,
3737                 info->max_frame_size );
3738
3739 #if SYNCLINK_GENERIC_HDLC
3740         hdlcdev_init(info);
3741 #endif
3742 }
3743
3744 static const struct tty_port_operations port_ops = {
3745         .carrier_raised = carrier_raised,
3746         .dtr_rts = dtr_rts,
3747 };
3748
3749 /* Allocate and initialize a device instance structure
3750  *
3751  * Return Value:        pointer to SLMP_INFO if success, otherwise NULL
3752  */
3753 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3754 {
3755         SLMP_INFO *info;
3756
3757         info = kzalloc(sizeof(SLMP_INFO),
3758                  GFP_KERNEL);
3759
3760         if (!info) {
3761                 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3762                         __FILE__,__LINE__, adapter_num, port_num);
3763         } else {
3764                 tty_port_init(&info->port);
3765                 info->port.ops = &port_ops;
3766                 info->magic = MGSL_MAGIC;
3767                 INIT_WORK(&info->task, bh_handler);
3768                 info->max_frame_size = 4096;
3769                 info->port.close_delay = 5*HZ/10;
3770                 info->port.closing_wait = 30*HZ;
3771                 init_waitqueue_head(&info->status_event_wait_q);
3772                 init_waitqueue_head(&info->event_wait_q);
3773                 spin_lock_init(&info->netlock);
3774                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3775                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3776                 info->adapter_num = adapter_num;
3777                 info->port_num = port_num;
3778
3779                 /* Copy configuration info to device instance data */
3780                 info->irq_level = pdev->irq;
3781                 info->phys_lcr_base = pci_resource_start(pdev,0);
3782                 info->phys_sca_base = pci_resource_start(pdev,2);
3783                 info->phys_memory_base = pci_resource_start(pdev,3);
3784                 info->phys_statctrl_base = pci_resource_start(pdev,4);
3785
3786                 /* Because veremap only works on page boundaries we must map
3787                  * a larger area than is actually implemented for the LCR
3788                  * memory range. We map a full page starting at the page boundary.
3789                  */
3790                 info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
3791                 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3792
3793                 info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
3794                 info->phys_sca_base &= ~(PAGE_SIZE-1);
3795
3796                 info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
3797                 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3798
3799                 info->bus_type = MGSL_BUS_TYPE_PCI;
3800                 info->irq_flags = IRQF_SHARED;
3801
3802                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3803                 setup_timer(&info->status_timer, status_timeout,
3804                                 (unsigned long)info);
3805
3806                 /* Store the PCI9050 misc control register value because a flaw
3807                  * in the PCI9050 prevents LCR registers from being read if
3808                  * BIOS assigns an LCR base address with bit 7 set.
3809                  *
3810                  * Only the misc control register is accessed for which only
3811                  * write access is needed, so set an initial value and change
3812                  * bits to the device instance data as we write the value
3813                  * to the actual misc control register.
3814                  */
3815                 info->misc_ctrl_value = 0x087e4546;
3816
3817                 /* initial port state is unknown - if startup errors
3818                  * occur, init_error will be set to indicate the
3819                  * problem. Once the port is fully initialized,
3820                  * this value will be set to 0 to indicate the
3821                  * port is available.
3822                  */
3823                 info->init_error = -1;
3824         }
3825
3826         return info;
3827 }
3828
3829 static void device_init(int adapter_num, struct pci_dev *pdev)
3830 {
3831         SLMP_INFO *port_array[SCA_MAX_PORTS];
3832         int port;
3833
3834         /* allocate device instances for up to SCA_MAX_PORTS devices */
3835         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3836                 port_array[port] = alloc_dev(adapter_num,port,pdev);
3837                 if( port_array[port] == NULL ) {
3838                         for ( --port; port >= 0; --port )
3839                                 kfree(port_array[port]);
3840                         return;
3841                 }
3842         }
3843
3844         /* give copy of port_array to all ports and add to device list  */
3845         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3846                 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3847                 add_device( port_array[port] );
3848                 spin_lock_init(&port_array[port]->lock);
3849         }
3850
3851         /* Allocate and claim adapter resources */
3852         if ( !claim_resources(port_array[0]) ) {
3853
3854                 alloc_dma_bufs(port_array[0]);
3855
3856                 /* copy resource information from first port to others */
3857                 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3858                         port_array[port]->lock  = port_array[0]->lock;
3859                         port_array[port]->irq_level     = port_array[0]->irq_level;
3860                         port_array[port]->memory_base   = port_array[0]->memory_base;
3861                         port_array[port]->sca_base      = port_array[0]->sca_base;
3862                         port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3863                         port_array[port]->lcr_base      = port_array[0]->lcr_base;
3864                         alloc_dma_bufs(port_array[port]);
3865                 }
3866
3867                 if ( request_irq(port_array[0]->irq_level,
3868                                         synclinkmp_interrupt,
3869                                         port_array[0]->irq_flags,
3870                                         port_array[0]->device_name,
3871                                         port_array[0]) < 0 ) {
3872                         printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3873                                 __FILE__,__LINE__,
3874                                 port_array[0]->device_name,
3875                                 port_array[0]->irq_level );
3876                 }
3877                 else {
3878                         port_array[0]->irq_requested = true;
3879                         adapter_test(port_array[0]);
3880                 }
3881         }
3882 }
3883
3884 static const struct tty_operations ops = {
3885         .open = open,
3886         .close = close,
3887         .write = write,
3888         .put_char = put_char,
3889         .flush_chars = flush_chars,
3890         .write_room = write_room,
3891         .chars_in_buffer = chars_in_buffer,
3892         .flush_buffer = flush_buffer,
3893         .ioctl = ioctl,
3894         .throttle = throttle,
3895         .unthrottle = unthrottle,
3896         .send_xchar = send_xchar,
3897         .break_ctl = set_break,
3898         .wait_until_sent = wait_until_sent,
3899         .set_termios = set_termios,
3900         .stop = tx_hold,
3901         .start = tx_release,
3902         .hangup = hangup,
3903         .tiocmget = tiocmget,
3904         .tiocmset = tiocmset,
3905         .get_icount = get_icount,
3906         .proc_fops = &synclinkmp_proc_fops,
3907 };
3908
3909
3910 static void synclinkmp_cleanup(void)
3911 {
3912         int rc;
3913         SLMP_INFO *info;
3914         SLMP_INFO *tmp;
3915
3916         printk("Unloading %s %s\n", driver_name, driver_version);
3917
3918         if (serial_driver) {
3919                 if ((rc = tty_unregister_driver(serial_driver)))
3920                         printk("%s(%d) failed to unregister tty driver err=%d\n",
3921                                __FILE__,__LINE__,rc);
3922                 put_tty_driver(serial_driver);
3923         }
3924
3925         /* reset devices */
3926         info = synclinkmp_device_list;
3927         while(info) {
3928                 reset_port(info);
3929                 info = info->next_device;
3930         }
3931
3932         /* release devices */
3933         info = synclinkmp_device_list;
3934         while(info) {
3935 #if SYNCLINK_GENERIC_HDLC
3936                 hdlcdev_exit(info);
3937 #endif
3938                 free_dma_bufs(info);
3939                 free_tmp_rx_buf(info);
3940                 if ( info->port_num == 0 ) {
3941                         if (info->sca_base)
3942                                 write_reg(info, LPR, 1); /* set low power mode */
3943                         release_resources(info);
3944                 }
3945                 tmp = info;
3946                 info = info->next_device;
3947                 kfree(tmp);
3948         }
3949
3950         pci_unregister_driver(&synclinkmp_pci_driver);
3951 }
3952
3953 /* Driver initialization entry point.
3954  */
3955
3956 static int __init synclinkmp_init(void)
3957 {
3958         int rc;
3959
3960         if (break_on_load) {
3961                 synclinkmp_get_text_ptr();
3962                 BREAKPOINT();
3963         }
3964
3965         printk("%s %s\n", driver_name, driver_version);
3966
3967         if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3968                 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3969                 return rc;
3970         }
3971
3972         serial_driver = alloc_tty_driver(128);
3973         if (!serial_driver) {
3974                 rc = -ENOMEM;
3975                 goto error;
3976         }
3977
3978         /* Initialize the tty_driver structure */
3979
3980         serial_driver->driver_name = "synclinkmp";
3981         serial_driver->name = "ttySLM";
3982         serial_driver->major = ttymajor;
3983         serial_driver->minor_start = 64;
3984         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3985         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3986         serial_driver->init_termios = tty_std_termios;
3987         serial_driver->init_termios.c_cflag =
3988                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3989         serial_driver->init_termios.c_ispeed = 9600;
3990         serial_driver->init_termios.c_ospeed = 9600;
3991         serial_driver->flags = TTY_DRIVER_REAL_RAW;
3992         tty_set_operations(serial_driver, &ops);
3993         if ((rc = tty_register_driver(serial_driver)) < 0) {
3994                 printk("%s(%d):Couldn't register serial driver\n",
3995                         __FILE__,__LINE__);
3996                 put_tty_driver(serial_driver);
3997                 serial_driver = NULL;
3998                 goto error;
3999         }
4000
4001         printk("%s %s, tty major#%d\n",
4002                 driver_name, driver_version,
4003                 serial_driver->major);
4004
4005         return 0;
4006
4007 error:
4008         synclinkmp_cleanup();
4009         return rc;
4010 }
4011
4012 static void __exit synclinkmp_exit(void)
4013 {
4014         synclinkmp_cleanup();
4015 }
4016
4017 module_init(synclinkmp_init);
4018 module_exit(synclinkmp_exit);
4019
4020 /* Set the port for internal loopback mode.
4021  * The TxCLK and RxCLK signals are generated from the BRG and
4022  * the TxD is looped back to the RxD internally.
4023  */
4024 static void enable_loopback(SLMP_INFO *info, int enable)
4025 {
4026         if (enable) {
4027                 /* MD2 (Mode Register 2)
4028                  * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
4029                  */
4030                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4031
4032                 /* degate external TxC clock source */
4033                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4034                 write_control_reg(info);
4035
4036                 /* RXS/TXS (Rx/Tx clock source)
4037                  * 07      Reserved, must be 0
4038                  * 06..04  Clock Source, 100=BRG
4039                  * 03..00  Clock Divisor, 0000=1
4040                  */
4041                 write_reg(info, RXS, 0x40);
4042                 write_reg(info, TXS, 0x40);
4043
4044         } else {
4045                 /* MD2 (Mode Register 2)
4046                  * 01..00  CNCT<1..0> Channel connection, 0=normal
4047                  */
4048                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4049
4050                 /* RXS/TXS (Rx/Tx clock source)
4051                  * 07      Reserved, must be 0
4052                  * 06..04  Clock Source, 000=RxC/TxC Pin
4053                  * 03..00  Clock Divisor, 0000=1
4054                  */
4055                 write_reg(info, RXS, 0x00);
4056                 write_reg(info, TXS, 0x00);
4057         }
4058
4059         /* set LinkSpeed if available, otherwise default to 2Mbps */
4060         if (info->params.clock_speed)
4061                 set_rate(info, info->params.clock_speed);
4062         else
4063                 set_rate(info, 3686400);
4064 }
4065
4066 /* Set the baud rate register to the desired speed
4067  *
4068  *      data_rate       data rate of clock in bits per second
4069  *                      A data rate of 0 disables the AUX clock.
4070  */
4071 static void set_rate( SLMP_INFO *info, u32 data_rate )
4072 {
4073         u32 TMCValue;
4074         unsigned char BRValue;
4075         u32 Divisor=0;
4076
4077         /* fBRG = fCLK/(TMC * 2^BR)
4078          */
4079         if (data_rate != 0) {
4080                 Divisor = 14745600/data_rate;
4081                 if (!Divisor)
4082                         Divisor = 1;
4083
4084                 TMCValue = Divisor;
4085
4086                 BRValue = 0;
4087                 if (TMCValue != 1 && TMCValue != 2) {
4088                         /* BRValue of 0 provides 50/50 duty cycle *only* when
4089                          * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4090                          * 50/50 duty cycle.
4091                          */
4092                         BRValue = 1;
4093                         TMCValue >>= 1;
4094                 }
4095
4096                 /* while TMCValue is too big for TMC register, divide
4097                  * by 2 and increment BR exponent.
4098                  */
4099                 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4100                         TMCValue >>= 1;
4101
4102                 write_reg(info, TXS,
4103                         (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4104                 write_reg(info, RXS,
4105                         (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4106                 write_reg(info, TMC, (unsigned char)TMCValue);
4107         }
4108         else {
4109                 write_reg(info, TXS,0);
4110                 write_reg(info, RXS,0);
4111                 write_reg(info, TMC, 0);
4112         }
4113 }
4114
4115 /* Disable receiver
4116  */
4117 static void rx_stop(SLMP_INFO *info)
4118 {
4119         if (debug_level >= DEBUG_LEVEL_ISR)
4120                 printk("%s(%d):%s rx_stop()\n",
4121                          __FILE__,__LINE__, info->device_name );
4122
4123         write_reg(info, CMD, RXRESET);
4124
4125         info->ie0_value &= ~RXRDYE;
4126         write_reg(info, IE0, info->ie0_value);  /* disable Rx data interrupts */
4127
4128         write_reg(info, RXDMA + DSR, 0);        /* disable Rx DMA */
4129         write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4130         write_reg(info, RXDMA + DIR, 0);        /* disable Rx DMA interrupts */
4131
4132         info->rx_enabled = false;
4133         info->rx_overflow = false;
4134 }
4135
4136 /* enable the receiver
4137  */
4138 static void rx_start(SLMP_INFO *info)
4139 {
4140         int i;
4141
4142         if (debug_level >= DEBUG_LEVEL_ISR)
4143                 printk("%s(%d):%s rx_start()\n",
4144                          __FILE__,__LINE__, info->device_name );
4145
4146         write_reg(info, CMD, RXRESET);
4147
4148         if ( info->params.mode == MGSL_MODE_HDLC ) {
4149                 /* HDLC, disabe IRQ on rxdata */
4150                 info->ie0_value &= ~RXRDYE;
4151                 write_reg(info, IE0, info->ie0_value);
4152
4153                 /* Reset all Rx DMA buffers and program rx dma */
4154                 write_reg(info, RXDMA + DSR, 0);                /* disable Rx DMA */
4155                 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4156
4157                 for (i = 0; i < info->rx_buf_count; i++) {
4158                         info->rx_buf_list[i].status = 0xff;
4159
4160                         // throttle to 4 shared memory writes at a time to prevent
4161                         // hogging local bus (keep latency time for DMA requests low).
4162                         if (!(i % 4))
4163                                 read_status_reg(info);
4164                 }
4165                 info->current_rx_buf = 0;
4166
4167                 /* set current/1st descriptor address */
4168                 write_reg16(info, RXDMA + CDA,
4169                         info->rx_buf_list_ex[0].phys_entry);
4170
4171                 /* set new last rx descriptor address */
4172                 write_reg16(info, RXDMA + EDA,
4173                         info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4174
4175                 /* set buffer length (shared by all rx dma data buffers) */
4176                 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4177
4178                 write_reg(info, RXDMA + DIR, 0x60);     /* enable Rx DMA interrupts (EOM/BOF) */
4179                 write_reg(info, RXDMA + DSR, 0xf2);     /* clear Rx DMA IRQs, enable Rx DMA */
4180         } else {
4181                 /* async, enable IRQ on rxdata */
4182                 info->ie0_value |= RXRDYE;
4183                 write_reg(info, IE0, info->ie0_value);
4184         }
4185
4186         write_reg(info, CMD, RXENABLE);
4187
4188         info->rx_overflow = false;
4189         info->rx_enabled = true;
4190 }
4191
4192 /* Enable the transmitter and send a transmit frame if
4193  * one is loaded in the DMA buffers.
4194  */
4195 static void tx_start(SLMP_INFO *info)
4196 {
4197         if (debug_level >= DEBUG_LEVEL_ISR)
4198                 printk("%s(%d):%s tx_start() tx_count=%d\n",
4199                          __FILE__,__LINE__, info->device_name,info->tx_count );
4200
4201         if (!info->tx_enabled ) {
4202                 write_reg(info, CMD, TXRESET);
4203                 write_reg(info, CMD, TXENABLE);
4204                 info->tx_enabled = true;
4205         }
4206
4207         if ( info->tx_count ) {
4208
4209                 /* If auto RTS enabled and RTS is inactive, then assert */
4210                 /* RTS and set a flag indicating that the driver should */
4211                 /* negate RTS when the transmission completes. */
4212
4213                 info->drop_rts_on_tx_done = false;
4214
4215                 if (info->params.mode != MGSL_MODE_ASYNC) {
4216
4217                         if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4218                                 get_signals( info );
4219                                 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4220                                         info->serial_signals |= SerialSignal_RTS;
4221                                         set_signals( info );
4222                                         info->drop_rts_on_tx_done = true;
4223                                 }
4224                         }
4225
4226                         write_reg16(info, TRC0,
4227                                 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4228
4229                         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4230                         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4231
4232                         /* set TX CDA (current descriptor address) */
4233                         write_reg16(info, TXDMA + CDA,
4234                                 info->tx_buf_list_ex[0].phys_entry);
4235
4236                         /* set TX EDA (last descriptor address) */
4237                         write_reg16(info, TXDMA + EDA,
4238                                 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4239
4240                         /* enable underrun IRQ */
4241                         info->ie1_value &= ~IDLE;
4242                         info->ie1_value |= UDRN;
4243                         write_reg(info, IE1, info->ie1_value);
4244                         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4245
4246                         write_reg(info, TXDMA + DIR, 0x40);             /* enable Tx DMA interrupts (EOM) */
4247                         write_reg(info, TXDMA + DSR, 0xf2);             /* clear Tx DMA IRQs, enable Tx DMA */
4248
4249                         mod_timer(&info->tx_timer, jiffies +
4250                                         msecs_to_jiffies(5000));
4251                 }
4252                 else {
4253                         tx_load_fifo(info);
4254                         /* async, enable IRQ on txdata */
4255                         info->ie0_value |= TXRDYE;
4256                         write_reg(info, IE0, info->ie0_value);
4257                 }
4258
4259                 info->tx_active = true;
4260         }
4261 }
4262
4263 /* stop the transmitter and DMA
4264  */
4265 static void tx_stop( SLMP_INFO *info )
4266 {
4267         if (debug_level >= DEBUG_LEVEL_ISR)
4268                 printk("%s(%d):%s tx_stop()\n",
4269                          __FILE__,__LINE__, info->device_name );
4270
4271         del_timer(&info->tx_timer);
4272
4273         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4274         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4275
4276         write_reg(info, CMD, TXRESET);
4277
4278         info->ie1_value &= ~(UDRN + IDLE);
4279         write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
4280         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
4281
4282         info->ie0_value &= ~TXRDYE;
4283         write_reg(info, IE0, info->ie0_value);  /* disable tx data interrupts */
4284
4285         info->tx_enabled = false;
4286         info->tx_active = false;
4287 }
4288
4289 /* Fill the transmit FIFO until the FIFO is full or
4290  * there is no more data to load.
4291  */
4292 static void tx_load_fifo(SLMP_INFO *info)
4293 {
4294         u8 TwoBytes[2];
4295
4296         /* do nothing is now tx data available and no XON/XOFF pending */
4297
4298         if ( !info->tx_count && !info->x_char )
4299                 return;
4300
4301         /* load the Transmit FIFO until FIFOs full or all data sent */
4302
4303         while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4304
4305                 /* there is more space in the transmit FIFO and */
4306                 /* there is more data in transmit buffer */
4307
4308                 if ( (info->tx_count > 1) && !info->x_char ) {
4309                         /* write 16-bits */
4310                         TwoBytes[0] = info->tx_buf[info->tx_get++];
4311                         if (info->tx_get >= info->max_frame_size)
4312                                 info->tx_get -= info->max_frame_size;
4313                         TwoBytes[1] = info->tx_buf[info->tx_get++];
4314                         if (info->tx_get >= info->max_frame_size)
4315                                 info->tx_get -= info->max_frame_size;
4316
4317                         write_reg16(info, TRB, *((u16 *)TwoBytes));
4318
4319                         info->tx_count -= 2;
4320                         info->icount.tx += 2;
4321                 } else {
4322                         /* only 1 byte left to transmit or 1 FIFO slot left */
4323
4324                         if (info->x_char) {
4325                                 /* transmit pending high priority char */
4326                                 write_reg(info, TRB, info->x_char);
4327                                 info->x_char = 0;
4328                         } else {
4329                                 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4330                                 if (info->tx_get >= info->max_frame_size)
4331                                         info->tx_get -= info->max_frame_size;
4332                                 info->tx_count--;
4333                         }
4334                         info->icount.tx++;
4335                 }
4336         }
4337 }
4338
4339 /* Reset a port to a known state
4340  */
4341 static void reset_port(SLMP_INFO *info)
4342 {
4343         if (info->sca_base) {
4344
4345                 tx_stop(info);
4346                 rx_stop(info);
4347
4348                 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4349                 set_signals(info);
4350
4351                 /* disable all port interrupts */
4352                 info->ie0_value = 0;
4353                 info->ie1_value = 0;
4354                 info->ie2_value = 0;
4355                 write_reg(info, IE0, info->ie0_value);
4356                 write_reg(info, IE1, info->ie1_value);
4357                 write_reg(info, IE2, info->ie2_value);
4358
4359                 write_reg(info, CMD, CHRESET);
4360         }
4361 }
4362
4363 /* Reset all the ports to a known state.
4364  */
4365 static void reset_adapter(SLMP_INFO *info)
4366 {
4367         int i;
4368
4369         for ( i=0; i < SCA_MAX_PORTS; ++i) {
4370                 if (info->port_array[i])
4371                         reset_port(info->port_array[i]);
4372         }
4373 }
4374
4375 /* Program port for asynchronous communications.
4376  */
4377 static void async_mode(SLMP_INFO *info)
4378 {
4379
4380         unsigned char RegValue;
4381
4382         tx_stop(info);
4383         rx_stop(info);
4384
4385         /* MD0, Mode Register 0
4386          *
4387          * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
4388          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4389          * 03      Reserved, must be 0
4390          * 02      CRCCC, CRC Calculation, 0=disabled
4391          * 01..00  STOP<1..0> Stop bits (00=1,10=2)
4392          *
4393          * 0000 0000
4394          */
4395         RegValue = 0x00;
4396         if (info->params.stop_bits != 1)
4397                 RegValue |= BIT1;
4398         write_reg(info, MD0, RegValue);
4399
4400         /* MD1, Mode Register 1
4401          *
4402          * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4403          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4404          * 03..02  RXCHR<1..0>, rx char size
4405          * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4406          *
4407          * 0100 0000
4408          */
4409         RegValue = 0x40;
4410         switch (info->params.data_bits) {
4411         case 7: RegValue |= BIT4 + BIT2; break;
4412         case 6: RegValue |= BIT5 + BIT3; break;
4413         case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4414         }
4415         if (info->params.parity != ASYNC_PARITY_NONE) {
4416                 RegValue |= BIT1;
4417                 if (info->params.parity == ASYNC_PARITY_ODD)
4418                         RegValue |= BIT0;
4419         }
4420         write_reg(info, MD1, RegValue);
4421
4422         /* MD2, Mode Register 2
4423          *
4424          * 07..02  Reserved, must be 0
4425          * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
4426          *
4427          * 0000 0000
4428          */
4429         RegValue = 0x00;
4430         if (info->params.loopback)
4431                 RegValue |= (BIT1 + BIT0);
4432         write_reg(info, MD2, RegValue);
4433
4434         /* RXS, Receive clock source
4435          *
4436          * 07      Reserved, must be 0
4437          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4438          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4439          */
4440         RegValue=BIT6;
4441         write_reg(info, RXS, RegValue);
4442
4443         /* TXS, Transmit clock source
4444          *
4445          * 07      Reserved, must be 0
4446          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4447          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4448          */
4449         RegValue=BIT6;
4450         write_reg(info, TXS, RegValue);
4451
4452         /* Control Register
4453          *
4454          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4455          */
4456         info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4457         write_control_reg(info);
4458
4459         tx_set_idle(info);
4460
4461         /* RRC Receive Ready Control 0
4462          *
4463          * 07..05  Reserved, must be 0
4464          * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4465          */
4466         write_reg(info, RRC, 0x00);
4467
4468         /* TRC0 Transmit Ready Control 0
4469          *
4470          * 07..05  Reserved, must be 0
4471          * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4472          */
4473         write_reg(info, TRC0, 0x10);
4474
4475         /* TRC1 Transmit Ready Control 1
4476          *
4477          * 07..05  Reserved, must be 0
4478          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4479          */
4480         write_reg(info, TRC1, 0x1e);
4481
4482         /* CTL, MSCI control register
4483          *
4484          * 07..06  Reserved, set to 0
4485          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4486          * 04      IDLC, idle control, 0=mark 1=idle register
4487          * 03      BRK, break, 0=off 1 =on (async)
4488          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4489          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4490          * 00      RTS, RTS output control, 0=active 1=inactive
4491          *
4492          * 0001 0001
4493          */
4494         RegValue = 0x10;
4495         if (!(info->serial_signals & SerialSignal_RTS))
4496                 RegValue |= 0x01;
4497         write_reg(info, CTL, RegValue);
4498
4499         /* enable status interrupts */
4500         info->ie0_value |= TXINTE + RXINTE;
4501         write_reg(info, IE0, info->ie0_value);
4502
4503         /* enable break detect interrupt */
4504         info->ie1_value = BRKD;
4505         write_reg(info, IE1, info->ie1_value);
4506
4507         /* enable rx overrun interrupt */
4508         info->ie2_value = OVRN;
4509         write_reg(info, IE2, info->ie2_value);
4510
4511         set_rate( info, info->params.data_rate * 16 );
4512 }
4513
4514 /* Program the SCA for HDLC communications.
4515  */
4516 static void hdlc_mode(SLMP_INFO *info)
4517 {
4518         unsigned char RegValue;
4519         u32 DpllDivisor;
4520
4521         // Can't use DPLL because SCA outputs recovered clock on RxC when
4522         // DPLL mode selected. This causes output contention with RxC receiver.
4523         // Use of DPLL would require external hardware to disable RxC receiver
4524         // when DPLL mode selected.
4525         info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4526
4527         /* disable DMA interrupts */
4528         write_reg(info, TXDMA + DIR, 0);
4529         write_reg(info, RXDMA + DIR, 0);
4530
4531         /* MD0, Mode Register 0
4532          *
4533          * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
4534          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4535          * 03      Reserved, must be 0
4536          * 02      CRCCC, CRC Calculation, 1=enabled
4537          * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4538          * 00      CRC0, CRC initial value, 1 = all 1s
4539          *
4540          * 1000 0001
4541          */
4542         RegValue = 0x81;
4543         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4544                 RegValue |= BIT4;
4545         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4546                 RegValue |= BIT4;
4547         if (info->params.crc_type == HDLC_CRC_16_CCITT)
4548                 RegValue |= BIT2 + BIT1;
4549         write_reg(info, MD0, RegValue);
4550
4551         /* MD1, Mode Register 1
4552          *
4553          * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
4554          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
4555          * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
4556          * 01..00  PMPM<1..0>, Parity mode, 00=no parity
4557          *
4558          * 0000 0000
4559          */
4560         RegValue = 0x00;
4561         write_reg(info, MD1, RegValue);
4562
4563         /* MD2, Mode Register 2
4564          *
4565          * 07      NRZFM, 0=NRZ, 1=FM
4566          * 06..05  CODE<1..0> Encoding, 00=NRZ
4567          * 04..03  DRATE<1..0> DPLL Divisor, 00=8
4568          * 02      Reserved, must be 0
4569          * 01..00  CNCT<1..0> Channel connection, 0=normal
4570          *
4571          * 0000 0000
4572          */
4573         RegValue = 0x00;
4574         switch(info->params.encoding) {
4575         case HDLC_ENCODING_NRZI:          RegValue |= BIT5; break;
4576         case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4577         case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4578         case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break;      /* aka Manchester */
4579 #if 0
4580         case HDLC_ENCODING_NRZB:                                        /* not supported */
4581         case HDLC_ENCODING_NRZI_MARK:                                   /* not supported */
4582         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:                          /* not supported */
4583 #endif
4584         }
4585         if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4586                 DpllDivisor = 16;
4587                 RegValue |= BIT3;
4588         } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4589                 DpllDivisor = 8;
4590         } else {
4591                 DpllDivisor = 32;
4592                 RegValue |= BIT4;
4593         }
4594         write_reg(info, MD2, RegValue);
4595
4596
4597         /* RXS, Receive clock source
4598          *
4599          * 07      Reserved, must be 0
4600          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4601          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4602          */
4603         RegValue=0;
4604         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4605                 RegValue |= BIT6;
4606         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4607                 RegValue |= BIT6 + BIT5;
4608         write_reg(info, RXS, RegValue);
4609
4610         /* TXS, Transmit clock source
4611          *
4612          * 07      Reserved, must be 0
4613          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4614          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4615          */
4616         RegValue=0;
4617         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4618                 RegValue |= BIT6;
4619         if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4620                 RegValue |= BIT6 + BIT5;
4621         write_reg(info, TXS, RegValue);
4622
4623         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4624                 set_rate(info, info->params.clock_speed * DpllDivisor);
4625         else
4626                 set_rate(info, info->params.clock_speed);
4627
4628         /* GPDATA (General Purpose I/O Data Register)
4629          *
4630          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4631          */
4632         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4633                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4634         else
4635                 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4636         write_control_reg(info);
4637
4638         /* RRC Receive Ready Control 0
4639          *
4640          * 07..05  Reserved, must be 0
4641          * 04..00  RRC<4..0> Rx FIFO trigger active
4642          */
4643         write_reg(info, RRC, rx_active_fifo_level);
4644
4645         /* TRC0 Transmit Ready Control 0
4646          *
4647          * 07..05  Reserved, must be 0
4648          * 04..00  TRC<4..0> Tx FIFO trigger active
4649          */
4650         write_reg(info, TRC0, tx_active_fifo_level);
4651
4652         /* TRC1 Transmit Ready Control 1
4653          *
4654          * 07..05  Reserved, must be 0
4655          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4656          */
4657         write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4658
4659         /* DMR, DMA Mode Register
4660          *
4661          * 07..05  Reserved, must be 0
4662          * 04      TMOD, Transfer Mode: 1=chained-block
4663          * 03      Reserved, must be 0
4664          * 02      NF, Number of Frames: 1=multi-frame
4665          * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
4666          * 00      Reserved, must be 0
4667          *
4668          * 0001 0100
4669          */
4670         write_reg(info, TXDMA + DMR, 0x14);
4671         write_reg(info, RXDMA + DMR, 0x14);
4672
4673         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4674         write_reg(info, RXDMA + CPB,
4675                 (unsigned char)(info->buffer_list_phys >> 16));
4676
4677         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4678         write_reg(info, TXDMA + CPB,
4679                 (unsigned char)(info->buffer_list_phys >> 16));
4680
4681         /* enable status interrupts. other code enables/disables
4682          * the individual sources for these two interrupt classes.
4683          */
4684         info->ie0_value |= TXINTE + RXINTE;
4685         write_reg(info, IE0, info->ie0_value);
4686
4687         /* CTL, MSCI control register
4688          *
4689          * 07..06  Reserved, set to 0
4690          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4691          * 04      IDLC, idle control, 0=mark 1=idle register
4692          * 03      BRK, break, 0=off 1 =on (async)
4693          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4694          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4695          * 00      RTS, RTS output control, 0=active 1=inactive
4696          *
4697          * 0001 0001
4698          */
4699         RegValue = 0x10;
4700         if (!(info->serial_signals & SerialSignal_RTS))
4701                 RegValue |= 0x01;
4702         write_reg(info, CTL, RegValue);
4703
4704         /* preamble not supported ! */
4705
4706         tx_set_idle(info);
4707         tx_stop(info);
4708         rx_stop(info);
4709
4710         set_rate(info, info->params.clock_speed);
4711
4712         if (info->params.loopback)
4713                 enable_loopback(info,1);
4714 }
4715
4716 /* Set the transmit HDLC idle mode
4717  */
4718 static void tx_set_idle(SLMP_INFO *info)
4719 {
4720         unsigned char RegValue = 0xff;
4721
4722         /* Map API idle mode to SCA register bits */
4723         switch(info->idle_mode) {
4724         case HDLC_TXIDLE_FLAGS:                 RegValue = 0x7e; break;
4725         case HDLC_TXIDLE_ALT_ZEROS_ONES:        RegValue = 0xaa; break;
4726         case HDLC_TXIDLE_ZEROS:                 RegValue = 0x00; break;
4727         case HDLC_TXIDLE_ONES:                  RegValue = 0xff; break;
4728         case HDLC_TXIDLE_ALT_MARK_SPACE:        RegValue = 0xaa; break;
4729         case HDLC_TXIDLE_SPACE:                 RegValue = 0x00; break;
4730         case HDLC_TXIDLE_MARK:                  RegValue = 0xff; break;
4731         }
4732
4733         write_reg(info, IDL, RegValue);
4734 }
4735
4736 /* Query the adapter for the state of the V24 status (input) signals.
4737  */
4738 static void get_signals(SLMP_INFO *info)
4739 {
4740         u16 status = read_reg(info, SR3);
4741         u16 gpstatus = read_status_reg(info);
4742         u16 testbit;
4743
4744         /* clear all serial signals except DTR and RTS */
4745         info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4746
4747         /* set serial signal bits to reflect MISR */
4748
4749         if (!(status & BIT3))
4750                 info->serial_signals |= SerialSignal_CTS;
4751
4752         if ( !(status & BIT2))
4753                 info->serial_signals |= SerialSignal_DCD;
4754
4755         testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4756         if (!(gpstatus & testbit))
4757                 info->serial_signals |= SerialSignal_RI;
4758
4759         testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4760         if (!(gpstatus & testbit))
4761                 info->serial_signals |= SerialSignal_DSR;
4762 }
4763
4764 /* Set the state of DTR and RTS based on contents of
4765  * serial_signals member of device context.
4766  */
4767 static void set_signals(SLMP_INFO *info)
4768 {
4769         unsigned char RegValue;
4770         u16 EnableBit;
4771
4772         RegValue = read_reg(info, CTL);
4773         if (info->serial_signals & SerialSignal_RTS)
4774                 RegValue &= ~BIT0;
4775         else
4776                 RegValue |= BIT0;
4777         write_reg(info, CTL, RegValue);
4778
4779         // Port 0..3 DTR is ctrl reg <1,3,5,7>
4780         EnableBit = BIT1 << (info->port_num*2);
4781         if (info->serial_signals & SerialSignal_DTR)
4782                 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4783         else
4784                 info->port_array[0]->ctrlreg_value |= EnableBit;
4785         write_control_reg(info);
4786 }
4787
4788 /*******************/
4789 /* DMA Buffer Code */
4790 /*******************/
4791
4792 /* Set the count for all receive buffers to SCABUFSIZE
4793  * and set the current buffer to the first buffer. This effectively
4794  * makes all buffers free and discards any data in buffers.
4795  */
4796 static void rx_reset_buffers(SLMP_INFO *info)
4797 {
4798         rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4799 }
4800
4801 /* Free the buffers used by a received frame
4802  *
4803  * info   pointer to device instance data
4804  * first  index of 1st receive buffer of frame
4805  * last   index of last receive buffer of frame
4806  */
4807 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4808 {
4809         bool done = false;
4810
4811         while(!done) {
4812                 /* reset current buffer for reuse */
4813                 info->rx_buf_list[first].status = 0xff;
4814
4815                 if (first == last) {
4816                         done = true;
4817                         /* set new last rx descriptor address */
4818                         write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4819                 }
4820
4821                 first++;
4822                 if (first == info->rx_buf_count)
4823                         first = 0;
4824         }
4825
4826         /* set current buffer to next buffer after last buffer of frame */
4827         info->current_rx_buf = first;
4828 }
4829
4830 /* Return a received frame from the receive DMA buffers.
4831  * Only frames received without errors are returned.
4832  *
4833  * Return Value:        true if frame returned, otherwise false
4834  */
4835 static bool rx_get_frame(SLMP_INFO *info)
4836 {
4837         unsigned int StartIndex, EndIndex;      /* index of 1st and last buffers of Rx frame */
4838         unsigned short status;
4839         unsigned int framesize = 0;
4840         bool ReturnCode = false;
4841         unsigned long flags;
4842         struct tty_struct *tty = info->port.tty;
4843         unsigned char addr_field = 0xff;
4844         SCADESC *desc;
4845         SCADESC_EX *desc_ex;
4846
4847 CheckAgain:
4848         /* assume no frame returned, set zero length */
4849         framesize = 0;
4850         addr_field = 0xff;
4851
4852         /*
4853          * current_rx_buf points to the 1st buffer of the next available
4854          * receive frame. To find the last buffer of the frame look for
4855          * a non-zero status field in the buffer entries. (The status
4856          * field is set by the 16C32 after completing a receive frame.
4857          */
4858         StartIndex = EndIndex = info->current_rx_buf;
4859
4860         for ( ;; ) {
4861                 desc = &info->rx_buf_list[EndIndex];
4862                 desc_ex = &info->rx_buf_list_ex[EndIndex];
4863
4864                 if (desc->status == 0xff)
4865                         goto Cleanup;   /* current desc still in use, no frames available */
4866
4867                 if (framesize == 0 && info->params.addr_filter != 0xff)
4868                         addr_field = desc_ex->virt_addr[0];
4869
4870                 framesize += desc->length;
4871
4872                 /* Status != 0 means last buffer of frame */
4873                 if (desc->status)
4874                         break;
4875
4876                 EndIndex++;
4877                 if (EndIndex == info->rx_buf_count)
4878                         EndIndex = 0;
4879
4880                 if (EndIndex == info->current_rx_buf) {
4881                         /* all buffers have been 'used' but none mark      */
4882                         /* the end of a frame. Reset buffers and receiver. */
4883                         if ( info->rx_enabled ){
4884                                 spin_lock_irqsave(&info->lock,flags);
4885                                 rx_start(info);
4886                                 spin_unlock_irqrestore(&info->lock,flags);
4887                         }
4888                         goto Cleanup;
4889                 }
4890
4891         }
4892
4893         /* check status of receive frame */
4894
4895         /* frame status is byte stored after frame data
4896          *
4897          * 7 EOM (end of msg), 1 = last buffer of frame
4898          * 6 Short Frame, 1 = short frame
4899          * 5 Abort, 1 = frame aborted
4900          * 4 Residue, 1 = last byte is partial
4901          * 3 Overrun, 1 = overrun occurred during frame reception
4902          * 2 CRC,     1 = CRC error detected
4903          *
4904          */
4905         status = desc->status;
4906
4907         /* ignore CRC bit if not using CRC (bit is undefined) */
4908         /* Note:CRC is not save to data buffer */
4909         if (info->params.crc_type == HDLC_CRC_NONE)
4910                 status &= ~BIT2;
4911
4912         if (framesize == 0 ||
4913                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4914                 /* discard 0 byte frames, this seems to occur sometime
4915                  * when remote is idling flags.
4916                  */
4917                 rx_free_frame_buffers(info, StartIndex, EndIndex);
4918                 goto CheckAgain;
4919         }
4920
4921         if (framesize < 2)
4922                 status |= BIT6;
4923
4924         if (status & (BIT6+BIT5+BIT3+BIT2)) {
4925                 /* received frame has errors,
4926                  * update counts and mark frame size as 0
4927                  */
4928                 if (status & BIT6)
4929                         info->icount.rxshort++;
4930                 else if (status & BIT5)
4931                         info->icount.rxabort++;
4932                 else if (status & BIT3)
4933                         info->icount.rxover++;
4934                 else
4935                         info->icount.rxcrc++;
4936
4937                 framesize = 0;
4938 #if SYNCLINK_GENERIC_HDLC
4939                 {
4940                         info->netdev->stats.rx_errors++;
4941                         info->netdev->stats.rx_frame_errors++;
4942                 }
4943 #endif
4944         }
4945
4946         if ( debug_level >= DEBUG_LEVEL_BH )
4947                 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4948                         __FILE__,__LINE__,info->device_name,status,framesize);
4949
4950         if ( debug_level >= DEBUG_LEVEL_DATA )
4951                 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4952                         min_t(unsigned int, framesize, SCABUFSIZE), 0);
4953
4954         if (framesize) {
4955                 if (framesize > info->max_frame_size)
4956                         info->icount.rxlong++;
4957                 else {
4958                         /* copy dma buffer(s) to contiguous intermediate buffer */
4959                         int copy_count = framesize;
4960                         int index = StartIndex;
4961                         unsigned char *ptmp = info->tmp_rx_buf;
4962                         info->tmp_rx_buf_count = framesize;
4963
4964                         info->icount.rxok++;
4965
4966                         while(copy_count) {
4967                                 int partial_count = min(copy_count,SCABUFSIZE);
4968                                 memcpy( ptmp,
4969                                         info->rx_buf_list_ex[index].virt_addr,
4970                                         partial_count );
4971                                 ptmp += partial_count;
4972                                 copy_count -= partial_count;
4973
4974                                 if ( ++index == info->rx_buf_count )
4975                                         index = 0;
4976                         }
4977
4978 #if SYNCLINK_GENERIC_HDLC
4979                         if (info->netcount)
4980                                 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4981                         else
4982 #endif
4983                                 ldisc_receive_buf(tty,info->tmp_rx_buf,
4984                                                   info->flag_buf, framesize);
4985                 }
4986         }
4987         /* Free the buffers used by this frame. */
4988         rx_free_frame_buffers( info, StartIndex, EndIndex );
4989
4990         ReturnCode = true;
4991
4992 Cleanup:
4993         if ( info->rx_enabled && info->rx_overflow ) {
4994                 /* Receiver is enabled, but needs to restarted due to
4995                  * rx buffer overflow. If buffers are empty, restart receiver.
4996                  */
4997                 if (info->rx_buf_list[EndIndex].status == 0xff) {
4998                         spin_lock_irqsave(&info->lock,flags);
4999                         rx_start(info);
5000                         spin_unlock_irqrestore(&info->lock,flags);
5001                 }
5002         }
5003
5004         return ReturnCode;
5005 }
5006
5007 /* load the transmit DMA buffer with data
5008  */
5009 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5010 {
5011         unsigned short copy_count;
5012         unsigned int i = 0;
5013         SCADESC *desc;
5014         SCADESC_EX *desc_ex;
5015
5016         if ( debug_level >= DEBUG_LEVEL_DATA )
5017                 trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5018
5019         /* Copy source buffer to one or more DMA buffers, starting with
5020          * the first transmit dma buffer.
5021          */
5022         for(i=0;;)
5023         {
5024                 copy_count = min_t(unsigned int, count, SCABUFSIZE);
5025
5026                 desc = &info->tx_buf_list[i];
5027                 desc_ex = &info->tx_buf_list_ex[i];
5028
5029                 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5030
5031                 desc->length = copy_count;
5032                 desc->status = 0;
5033
5034                 buf += copy_count;
5035                 count -= copy_count;
5036
5037                 if (!count)
5038                         break;
5039
5040                 i++;
5041                 if (i >= info->tx_buf_count)
5042                         i = 0;
5043         }
5044
5045         info->tx_buf_list[i].status = 0x81;     /* set EOM and EOT status */
5046         info->last_tx_buf = ++i;
5047 }
5048
5049 static bool register_test(SLMP_INFO *info)
5050 {
5051         static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5052         static unsigned int count = ARRAY_SIZE(testval);
5053         unsigned int i;
5054         bool rc = true;
5055         unsigned long flags;
5056
5057         spin_lock_irqsave(&info->lock,flags);
5058         reset_port(info);
5059
5060         /* assume failure */
5061         info->init_error = DiagStatus_AddressFailure;
5062
5063         /* Write bit patterns to various registers but do it out of */
5064         /* sync, then read back and verify values. */
5065
5066         for (i = 0 ; i < count ; i++) {
5067                 write_reg(info, TMC, testval[i]);
5068                 write_reg(info, IDL, testval[(i+1)%count]);
5069                 write_reg(info, SA0, testval[(i+2)%count]);
5070                 write_reg(info, SA1, testval[(i+3)%count]);
5071
5072                 if ( (read_reg(info, TMC) != testval[i]) ||
5073                           (read_reg(info, IDL) != testval[(i+1)%count]) ||
5074                           (read_reg(info, SA0) != testval[(i+2)%count]) ||
5075                           (read_reg(info, SA1) != testval[(i+3)%count]) )
5076                 {
5077                         rc = false;
5078                         break;
5079                 }
5080         }
5081
5082         reset_port(info);
5083         spin_unlock_irqrestore(&info->lock,flags);
5084
5085         return rc;
5086 }
5087
5088 static bool irq_test(SLMP_INFO *info)
5089 {
5090         unsigned long timeout;
5091         unsigned long flags;
5092
5093         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5094
5095         spin_lock_irqsave(&info->lock,flags);
5096         reset_port(info);
5097
5098         /* assume failure */
5099         info->init_error = DiagStatus_IrqFailure;
5100         info->irq_occurred = false;
5101
5102         /* setup timer0 on SCA0 to interrupt */
5103
5104         /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5105         write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5106
5107         write_reg(info, (unsigned char)(timer + TEPR), 0);      /* timer expand prescale */
5108         write_reg16(info, (unsigned char)(timer + TCONR), 1);   /* timer constant */
5109
5110
5111         /* TMCS, Timer Control/Status Register
5112          *
5113          * 07      CMF, Compare match flag (read only) 1=match
5114          * 06      ECMI, CMF Interrupt Enable: 1=enabled
5115          * 05      Reserved, must be 0
5116          * 04      TME, Timer Enable
5117          * 03..00  Reserved, must be 0
5118          *
5119          * 0101 0000
5120          */
5121         write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5122
5123         spin_unlock_irqrestore(&info->lock,flags);
5124
5125         timeout=100;
5126         while( timeout-- && !info->irq_occurred ) {
5127                 msleep_interruptible(10);
5128         }
5129
5130         spin_lock_irqsave(&info->lock,flags);
5131         reset_port(info);
5132         spin_unlock_irqrestore(&info->lock,flags);
5133
5134         return info->irq_occurred;
5135 }
5136
5137 /* initialize individual SCA device (2 ports)
5138  */
5139 static bool sca_init(SLMP_INFO *info)
5140 {
5141         /* set wait controller to single mem partition (low), no wait states */
5142         write_reg(info, PABR0, 0);      /* wait controller addr boundary 0 */
5143         write_reg(info, PABR1, 0);      /* wait controller addr boundary 1 */
5144         write_reg(info, WCRL, 0);       /* wait controller low range */
5145         write_reg(info, WCRM, 0);       /* wait controller mid range */
5146         write_reg(info, WCRH, 0);       /* wait controller high range */
5147
5148         /* DPCR, DMA Priority Control
5149          *
5150          * 07..05  Not used, must be 0
5151          * 04      BRC, bus release condition: 0=all transfers complete
5152          * 03      CCC, channel change condition: 0=every cycle
5153          * 02..00  PR<2..0>, priority 100=round robin
5154          *
5155          * 00000100 = 0x04
5156          */
5157         write_reg(info, DPCR, dma_priority);
5158
5159         /* DMA Master Enable, BIT7: 1=enable all channels */
5160         write_reg(info, DMER, 0x80);
5161
5162         /* enable all interrupt classes */
5163         write_reg(info, IER0, 0xff);    /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5164         write_reg(info, IER1, 0xff);    /* DMIB,DMIA (channels 0-3) */
5165         write_reg(info, IER2, 0xf0);    /* TIRQ (timers 0-3) */
5166
5167         /* ITCR, interrupt control register
5168          * 07      IPC, interrupt priority, 0=MSCI->DMA
5169          * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5170          * 04      VOS, Vector Output, 0=unmodified vector
5171          * 03..00  Reserved, must be 0
5172          */
5173         write_reg(info, ITCR, 0);
5174
5175         return true;
5176 }
5177
5178 /* initialize adapter hardware
5179  */
5180 static bool init_adapter(SLMP_INFO *info)
5181 {
5182         int i;
5183
5184         /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5185         volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5186         u32 readval;
5187
5188         info->misc_ctrl_value |= BIT30;
5189         *MiscCtrl = info->misc_ctrl_value;
5190
5191         /*
5192          * Force at least 170ns delay before clearing
5193          * reset bit. Each read from LCR takes at least
5194          * 30ns so 10 times for 300ns to be safe.
5195          */
5196         for(i=0;i<10;i++)
5197                 readval = *MiscCtrl;
5198
5199         info->misc_ctrl_value &= ~BIT30;
5200         *MiscCtrl = info->misc_ctrl_value;
5201
5202         /* init control reg (all DTRs off, all clksel=input) */
5203         info->ctrlreg_value = 0xaa;
5204         write_control_reg(info);
5205
5206         {
5207                 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5208                 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5209
5210                 switch(read_ahead_count)
5211                 {
5212                 case 16:
5213                         lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5214                         break;
5215                 case 8:
5216                         lcr1_brdr_value |= BIT5 + BIT4;
5217                         break;
5218                 case 4:
5219                         lcr1_brdr_value |= BIT5 + BIT3;
5220                         break;
5221                 case 0:
5222                         lcr1_brdr_value |= BIT5;
5223                         break;
5224                 }
5225
5226                 *LCR1BRDR = lcr1_brdr_value;
5227                 *MiscCtrl = misc_ctrl_value;
5228         }
5229
5230         sca_init(info->port_array[0]);
5231         sca_init(info->port_array[2]);
5232
5233         return true;
5234 }
5235
5236 /* Loopback an HDLC frame to test the hardware
5237  * interrupt and DMA functions.
5238  */
5239 static bool loopback_test(SLMP_INFO *info)
5240 {
5241 #define TESTFRAMESIZE 20
5242
5243         unsigned long timeout;
5244         u16 count = TESTFRAMESIZE;
5245         unsigned char buf[TESTFRAMESIZE];
5246         bool rc = false;
5247         unsigned long flags;
5248
5249         struct tty_struct *oldtty = info->port.tty;
5250         u32 speed = info->params.clock_speed;
5251
5252         info->params.clock_speed = 3686400;
5253         info->port.tty = NULL;
5254
5255         /* assume failure */
5256         info->init_error = DiagStatus_DmaFailure;
5257
5258         /* build and send transmit frame */
5259         for (count = 0; count < TESTFRAMESIZE;++count)
5260                 buf[count] = (unsigned char)count;
5261
5262         memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5263
5264         /* program hardware for HDLC and enabled receiver */
5265         spin_lock_irqsave(&info->lock,flags);
5266         hdlc_mode(info);
5267         enable_loopback(info,1);
5268         rx_start(info);
5269         info->tx_count = count;
5270         tx_load_dma_buffer(info,buf,count);
5271         tx_start(info);
5272         spin_unlock_irqrestore(&info->lock,flags);
5273
5274         /* wait for receive complete */
5275         /* Set a timeout for waiting for interrupt. */
5276         for ( timeout = 100; timeout; --timeout ) {
5277                 msleep_interruptible(10);
5278
5279                 if (rx_get_frame(info)) {
5280                         rc = true;
5281                         break;
5282                 }
5283         }
5284
5285         /* verify received frame length and contents */
5286         if (rc &&
5287             ( info->tmp_rx_buf_count != count ||
5288               memcmp(buf, info->tmp_rx_buf,count))) {
5289                 rc = false;
5290         }
5291
5292         spin_lock_irqsave(&info->lock,flags);
5293         reset_adapter(info);
5294         spin_unlock_irqrestore(&info->lock,flags);
5295
5296         info->params.clock_speed = speed;
5297         info->port.tty = oldtty;
5298
5299         return rc;
5300 }
5301
5302 /* Perform diagnostics on hardware
5303  */
5304 static int adapter_test( SLMP_INFO *info )
5305 {
5306         unsigned long flags;
5307         if ( debug_level >= DEBUG_LEVEL_INFO )
5308                 printk( "%s(%d):Testing device %s\n",
5309                         __FILE__,__LINE__,info->device_name );
5310
5311         spin_lock_irqsave(&info->lock,flags);
5312         init_adapter(info);
5313         spin_unlock_irqrestore(&info->lock,flags);
5314
5315         info->port_array[0]->port_count = 0;
5316
5317         if ( register_test(info->port_array[0]) &&
5318                 register_test(info->port_array[1])) {
5319
5320                 info->port_array[0]->port_count = 2;
5321
5322                 if ( register_test(info->port_array[2]) &&
5323                         register_test(info->port_array[3]) )
5324                         info->port_array[0]->port_count += 2;
5325         }
5326         else {
5327                 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5328                         __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5329                 return -ENODEV;
5330         }
5331
5332         if ( !irq_test(info->port_array[0]) ||
5333                 !irq_test(info->port_array[1]) ||
5334                  (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5335                  (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5336                 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5337                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5338                 return -ENODEV;
5339         }
5340
5341         if (!loopback_test(info->port_array[0]) ||
5342                 !loopback_test(info->port_array[1]) ||
5343                  (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5344                  (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5345                 printk( "%s(%d):DMA test failure for device %s\n",
5346                         __FILE__,__LINE__,info->device_name);
5347                 return -ENODEV;
5348         }
5349
5350         if ( debug_level >= DEBUG_LEVEL_INFO )
5351                 printk( "%s(%d):device %s passed diagnostics\n",
5352                         __FILE__,__LINE__,info->device_name );
5353
5354         info->port_array[0]->init_error = 0;
5355         info->port_array[1]->init_error = 0;
5356         if ( info->port_count > 2 ) {
5357                 info->port_array[2]->init_error = 0;
5358                 info->port_array[3]->init_error = 0;
5359         }
5360
5361         return 0;
5362 }
5363
5364 /* Test the shared memory on a PCI adapter.
5365  */
5366 static bool memory_test(SLMP_INFO *info)
5367 {
5368         static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5369                 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5370         unsigned long count = ARRAY_SIZE(testval);
5371         unsigned long i;
5372         unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5373         unsigned long * addr = (unsigned long *)info->memory_base;
5374
5375         /* Test data lines with test pattern at one location. */
5376
5377         for ( i = 0 ; i < count ; i++ ) {
5378                 *addr = testval[i];
5379                 if ( *addr != testval[i] )
5380                         return false;
5381         }
5382
5383         /* Test address lines with incrementing pattern over */
5384         /* entire address range. */
5385
5386         for ( i = 0 ; i < limit ; i++ ) {
5387                 *addr = i * 4;
5388                 addr++;
5389         }
5390
5391         addr = (unsigned long *)info->memory_base;
5392
5393         for ( i = 0 ; i < limit ; i++ ) {
5394                 if ( *addr != i * 4 )
5395                         return false;
5396                 addr++;
5397         }
5398
5399         memset( info->memory_base, 0, SCA_MEM_SIZE );
5400         return true;
5401 }
5402
5403 /* Load data into PCI adapter shared memory.
5404  *
5405  * The PCI9050 releases control of the local bus
5406  * after completing the current read or write operation.
5407  *
5408  * While the PCI9050 write FIFO not empty, the
5409  * PCI9050 treats all of the writes as a single transaction
5410  * and does not release the bus. This causes DMA latency problems
5411  * at high speeds when copying large data blocks to the shared memory.
5412  *
5413  * This function breaks a write into multiple transations by
5414  * interleaving a read which flushes the write FIFO and 'completes'
5415  * the write transation. This allows any pending DMA request to gain control
5416  * of the local bus in a timely fasion.
5417  */
5418 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5419 {
5420         /* A load interval of 16 allows for 4 32-bit writes at */
5421         /* 136ns each for a maximum latency of 542ns on the local bus.*/
5422
5423         unsigned short interval = count / sca_pci_load_interval;
5424         unsigned short i;
5425
5426         for ( i = 0 ; i < interval ; i++ )
5427         {
5428                 memcpy(dest, src, sca_pci_load_interval);
5429                 read_status_reg(info);
5430                 dest += sca_pci_load_interval;
5431                 src += sca_pci_load_interval;
5432         }
5433
5434         memcpy(dest, src, count % sca_pci_load_interval);
5435 }
5436
5437 static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5438 {
5439         int i;
5440         int linecount;
5441         if (xmit)
5442                 printk("%s tx data:\n",info->device_name);
5443         else
5444                 printk("%s rx data:\n",info->device_name);
5445
5446         while(count) {
5447                 if (count > 16)
5448                         linecount = 16;
5449                 else
5450                         linecount = count;
5451
5452                 for(i=0;i<linecount;i++)
5453                         printk("%02X ",(unsigned char)data[i]);
5454                 for(;i<17;i++)
5455                         printk("   ");
5456                 for(i=0;i<linecount;i++) {
5457                         if (data[i]>=040 && data[i]<=0176)
5458                                 printk("%c",data[i]);
5459                         else
5460                                 printk(".");
5461                 }
5462                 printk("\n");
5463
5464                 data  += linecount;
5465                 count -= linecount;
5466         }
5467 }       /* end of trace_block() */
5468
5469 /* called when HDLC frame times out
5470  * update stats and do tx completion processing
5471  */
5472 static void tx_timeout(unsigned long context)
5473 {
5474         SLMP_INFO *info = (SLMP_INFO*)context;
5475         unsigned long flags;
5476
5477         if ( debug_level >= DEBUG_LEVEL_INFO )
5478                 printk( "%s(%d):%s tx_timeout()\n",
5479                         __FILE__,__LINE__,info->device_name);
5480         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5481                 info->icount.txtimeout++;
5482         }
5483         spin_lock_irqsave(&info->lock,flags);
5484         info->tx_active = false;
5485         info->tx_count = info->tx_put = info->tx_get = 0;
5486
5487         spin_unlock_irqrestore(&info->lock,flags);
5488
5489 #if SYNCLINK_GENERIC_HDLC
5490         if (info->netcount)
5491                 hdlcdev_tx_done(info);
5492         else
5493 #endif
5494                 bh_transmit(info);
5495 }
5496
5497 /* called to periodically check the DSR/RI modem signal input status
5498  */
5499 static void status_timeout(unsigned long context)
5500 {
5501         u16 status = 0;
5502         SLMP_INFO *info = (SLMP_INFO*)context;
5503         unsigned long flags;
5504         unsigned char delta;
5505
5506
5507         spin_lock_irqsave(&info->lock,flags);
5508         get_signals(info);
5509         spin_unlock_irqrestore(&info->lock,flags);
5510
5511         /* check for DSR/RI state change */
5512
5513         delta = info->old_signals ^ info->serial_signals;
5514         info->old_signals = info->serial_signals;
5515
5516         if (delta & SerialSignal_DSR)
5517                 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5518
5519         if (delta & SerialSignal_RI)
5520                 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5521
5522         if (delta & SerialSignal_DCD)
5523                 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5524
5525         if (delta & SerialSignal_CTS)
5526                 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5527
5528         if (status)
5529                 isr_io_pin(info,status);
5530
5531         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5532 }
5533
5534
5535 /* Register Access Routines -
5536  * All registers are memory mapped
5537  */
5538 #define CALC_REGADDR() \
5539         unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5540         if (info->port_num > 1) \
5541                 RegAddr += 256;                 /* port 0-1 SCA0, 2-3 SCA1 */ \
5542         if ( info->port_num & 1) { \
5543                 if (Addr > 0x7f) \
5544                         RegAddr += 0x40;        /* DMA access */ \
5545                 else if (Addr > 0x1f && Addr < 0x60) \
5546                         RegAddr += 0x20;        /* MSCI access */ \
5547         }
5548
5549
5550 static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5551 {
5552         CALC_REGADDR();
5553         return *RegAddr;
5554 }
5555 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5556 {
5557         CALC_REGADDR();
5558         *RegAddr = Value;
5559 }
5560
5561 static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5562 {
5563         CALC_REGADDR();
5564         return *((u16 *)RegAddr);
5565 }
5566
5567 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5568 {
5569         CALC_REGADDR();
5570         *((u16 *)RegAddr) = Value;
5571 }
5572
5573 static unsigned char read_status_reg(SLMP_INFO * info)
5574 {
5575         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5576         return *RegAddr;
5577 }
5578
5579 static void write_control_reg(SLMP_INFO * info)
5580 {
5581         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5582         *RegAddr = info->port_array[0]->ctrlreg_value;
5583 }
5584
5585
5586 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5587                                           const struct pci_device_id *ent)
5588 {
5589         if (pci_enable_device(dev)) {
5590                 printk("error enabling pci device %p\n", dev);
5591                 return -EIO;
5592         }
5593         device_init( ++synclinkmp_adapter_count, dev );
5594         return 0;
5595 }
5596
5597 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
5598 {
5599 }