drivers/net/stmmac/stmmac_main.c

   1 /*******************************************************************************
   2   This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
   3   ST Ethernet IPs are built around a Synopsys IP Core.
   4
   5   Copyright (C) 2007-2009  STMicroelectronics Ltd
   6
   7   This program is free software; you can redistribute it and/or modify it
   8   under the terms and conditions of the GNU General Public License,
   9   version 2, as published by the Free Software Foundation.
  10
  11   This program is distributed in the hope it will be useful, but WITHOUT
  12   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  14   more details.
  15
  16   You should have received a copy of the GNU General Public License along with
  17   this program; if not, write to the Free Software Foundation, Inc.,
  18   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  19
  20   The full GNU General Public License is included in this distribution in
  21   the file called "COPYING".
  22
  23   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
  24
  25   Documentation available at:
  26         http://www.stlinux.com
  27   Support available at:
  28         https://bugzilla.stlinux.com/
  29 *******************************************************************************/
  30
  31 #include <linux/module.h>
  32 #include <linux/init.h>
  33 #include <linux/kernel.h>
  34 #include <linux/interrupt.h>
  35 #include <linux/etherdevice.h>
  36 #include <linux/platform_device.h>
  37 #include <linux/ip.h>
  38 #include <linux/tcp.h>
  39 #include <linux/skbuff.h>
  40 #include <linux/ethtool.h>
  41 #include <linux/if_ether.h>
  42 #include <linux/crc32.h>
  43 #include <linux/mii.h>
  44 #include <linux/phy.h>
  45 #include <linux/if_vlan.h>
  46 #include <linux/dma-mapping.h>
  47 #include <linux/slab.h>
  48 #include "stmmac.h"
  49
  50 #define STMMAC_RESOURCE_NAME    "stmmaceth"
  51 #define PHY_RESOURCE_NAME       "stmmacphy"
  52
  53 #undef STMMAC_DEBUG
  54 /*#define STMMAC_DEBUG*/
  55 #ifdef STMMAC_DEBUG
  56 #define DBG(nlevel, klevel, fmt, args...) \
  57                 ((void)(netif_msg_##nlevel(priv) && \
  58                 printk(KERN_##klevel fmt, ## args)))
  59 #else
  60 #define DBG(nlevel, klevel, fmt, args...) do { } while (0)
  61 #endif
  62
  63 #undef STMMAC_RX_DEBUG
  64 /*#define STMMAC_RX_DEBUG*/
  65 #ifdef STMMAC_RX_DEBUG
  66 #define RX_DBG(fmt, args...)  printk(fmt, ## args)
  67 #else
  68 #define RX_DBG(fmt, args...)  do { } while (0)
  69 #endif
  70
  71 #undef STMMAC_XMIT_DEBUG
  72 /*#define STMMAC_XMIT_DEBUG*/
  73 #ifdef STMMAC_TX_DEBUG
  74 #define TX_DBG(fmt, args...)  printk(fmt, ## args)
  75 #else
  76 #define TX_DBG(fmt, args...)  do { } while (0)
  77 #endif
  78
  79 #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
  80 #define JUMBO_LEN       9000
  81
  82 /* Module parameters */
  83 #define TX_TIMEO 5000 /* default 5 seconds */
  84 static int watchdog = TX_TIMEO;
  85 module_param(watchdog, int, S_IRUGO | S_IWUSR);
  86 MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
  87
  88 static int debug = -1;          /* -1: default, 0: no output, 16:  all */
  89 module_param(debug, int, S_IRUGO | S_IWUSR);
  90 MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
  91
  92 static int phyaddr = -1;
  93 module_param(phyaddr, int, S_IRUGO);
  94 MODULE_PARM_DESC(phyaddr, "Physical device address");
  95
  96 #define DMA_TX_SIZE 256
  97 static int dma_txsize = DMA_TX_SIZE;
  98 module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
  99 MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
 100
 101 #define DMA_RX_SIZE 256
 102 static int dma_rxsize = DMA_RX_SIZE;
 103 module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
 104 MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
 105
 106 static int flow_ctrl = FLOW_OFF;
 107 module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
 108 MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
 109
 110 static int pause = PAUSE_TIME;
 111 module_param(pause, int, S_IRUGO | S_IWUSR);
 112 MODULE_PARM_DESC(pause, "Flow Control Pause Time");
 113
 114 #define TC_DEFAULT 64
 115 static int tc = TC_DEFAULT;
 116 module_param(tc, int, S_IRUGO | S_IWUSR);
 117 MODULE_PARM_DESC(tc, "DMA threshold control value");
 118
 119 #define RX_NO_COALESCE  1       /* Always interrupt on completion */
 120 #define TX_NO_COALESCE  -1      /* No moderation by default */
 121
 122 /* Pay attention to tune this parameter; take care of both
 123  * hardware capability and network stabitily/performance impact.
 124  * Many tests showed that ~4ms latency seems to be good enough. */
 125 #ifdef CONFIG_STMMAC_TIMER
 126 #define DEFAULT_PERIODIC_RATE   256
 127 static int tmrate = DEFAULT_PERIODIC_RATE;
 128 module_param(tmrate, int, S_IRUGO | S_IWUSR);
 129 MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
 130 #endif
 131
 132 #define DMA_BUFFER_SIZE BUF_SIZE_2KiB
 133 static int buf_sz = DMA_BUFFER_SIZE;
 134 module_param(buf_sz, int, S_IRUGO | S_IWUSR);
 135 MODULE_PARM_DESC(buf_sz, "DMA buffer size");
 136
 137 /* In case of Giga ETH, we can enable/disable the COE for the
 138  * transmit HW checksum computation.
 139  * Note that, if tx csum is off in HW, SG will be still supported. */
 140 static int tx_coe = HW_CSUM;
 141 module_param(tx_coe, int, S_IRUGO | S_IWUSR);
 142 MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
 143
 144 static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
 145                                       NETIF_MSG_LINK | NETIF_MSG_IFUP |
 146                                       NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
 147
 148 static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
 149 static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
 150
 151 /**
 152  * stmmac_verify_args - verify the driver parameters.
 153  * Description: it verifies if some wrong parameter is passed to the driver.
 154  * Note that wrong parameters are replaced with the default values.
 155  */
 156 static void stmmac_verify_args(void)
 157 {
 158         if (unlikely(watchdog < 0))
 159                 watchdog = TX_TIMEO;
 160         if (unlikely(dma_rxsize < 0))
 161                 dma_rxsize = DMA_RX_SIZE;
 162         if (unlikely(dma_txsize < 0))
 163                 dma_txsize = DMA_TX_SIZE;
 164         if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
 165                 buf_sz = DMA_BUFFER_SIZE;
 166         if (unlikely(flow_ctrl > 1))
 167                 flow_ctrl = FLOW_AUTO;
 168         else if (likely(flow_ctrl < 0))
 169                 flow_ctrl = FLOW_OFF;
 170         if (unlikely((pause < 0) || (pause > 0xffff)))
 171                 pause = PAUSE_TIME;
 172 }
 173
 174 #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
 175 static void print_pkt(unsigned char *buf, int len)
 176 {
 177         int j;
 178         pr_info("len = %d byte, buf addr: 0x%p", len, buf);
 179         for (j = 0; j < len; j++) {
 180                 if ((j % 16) == 0)
 181                         pr_info("\n %03x:", j);
 182                 pr_info(" %02x", buf[j]);
 183         }
 184         pr_info("\n");
 185 }
 186 #endif
 187
 188 /* minimum number of free TX descriptors required to wake up TX process */
 189 #define STMMAC_TX_THRESH(x)     (x->dma_tx_size/4)
 190
 191 static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
 192 {
 193         return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
 194 }
 195
 196 /**
 197  * stmmac_adjust_link
 198  * @dev: net device structure
 199  * Description: it adjusts the link parameters.
 200  */
 201 static void stmmac_adjust_link(struct net_device *dev)
 202 {
 203         struct stmmac_priv *priv = netdev_priv(dev);
 204         struct phy_device *phydev = priv->phydev;
 205         unsigned long ioaddr = dev->base_addr;
 206         unsigned long flags;
 207         int new_state = 0;
 208         unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
 209
 210         if (phydev == NULL)
 211                 return;
 212
 213         DBG(probe, DEBUG, "stmmac_adjust_link: called.  address %d link %d\n",
 214             phydev->addr, phydev->link);
 215
 216         spin_lock_irqsave(&priv->lock, flags);
 217         if (phydev->link) {
 218                 u32 ctrl = readl(ioaddr + MAC_CTRL_REG);
 219
 220                 /* Now we make sure that we can be in full duplex mode.
 221                  * If not, we operate in half-duplex mode. */
 222                 if (phydev->duplex != priv->oldduplex) {
 223                         new_state = 1;
 224                         if (!(phydev->duplex))
 225                                 ctrl &= ~priv->hw->link.duplex;
 226                         else
 227                                 ctrl |= priv->hw->link.duplex;
 228                         priv->oldduplex = phydev->duplex;
 229                 }
 230                 /* Flow Control operation */
 231                 if (phydev->pause)
 232                         priv->hw->mac->flow_ctrl(ioaddr, phydev->duplex,
 233                                                  fc, pause_time);
 234
 235                 if (phydev->speed != priv->speed) {
 236                         new_state = 1;
 237                         switch (phydev->speed) {
 238                         case 1000:
 239                                 if (likely(priv->is_gmac))
 240                                         ctrl &= ~priv->hw->link.port;
 241                                 break;
 242                         case 100:
 243                         case 10:
 244                                 if (priv->is_gmac) {
 245                                         ctrl |= priv->hw->link.port;
 246                                         if (phydev->speed == SPEED_100) {
 247                                                 ctrl |= priv->hw->link.speed;
 248                                         } else {
 249                                                 ctrl &= ~(priv->hw->link.speed);
 250                                         }
 251                                 } else {
 252                                         ctrl &= ~priv->hw->link.port;
 253                                 }
 254                                 if (likely(priv->fix_mac_speed))
 255                                         priv->fix_mac_speed(priv->bsp_priv,
 256                                                             phydev->speed);
 257                                 break;
 258                         default:
 259                                 if (netif_msg_link(priv))
 260                                         pr_warning("%s: Speed (%d) is not 10"
 261                                        " or 100!\n", dev->name, phydev->speed);
 262                                 break;
 263                         }
 264
 265                         priv->speed = phydev->speed;
 266                 }
 267
 268                 writel(ctrl, ioaddr + MAC_CTRL_REG);
 269
 270                 if (!priv->oldlink) {
 271                         new_state = 1;
 272                         priv->oldlink = 1;
 273                 }
 274         } else if (priv->oldlink) {
 275                 new_state = 1;
 276                 priv->oldlink = 0;
 277                 priv->speed = 0;
 278                 priv->oldduplex = -1;
 279         }
 280
 281         if (new_state && netif_msg_link(priv))
 282                 phy_print_status(phydev);
 283
 284         spin_unlock_irqrestore(&priv->lock, flags);
 285
 286         DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
 287 }
 288
 289 /**
 290  * stmmac_init_phy - PHY initialization
 291  * @dev: net device structure
 292  * Description: it initializes the driver's PHY state, and attaches the PHY
 293  * to the mac driver.
 294  *  Return value:
 295  *  0 on success
 296  */
 297 static int stmmac_init_phy(struct net_device *dev)
 298 {
 299         struct stmmac_priv *priv = netdev_priv(dev);
 300         struct phy_device *phydev;
 301         char phy_id[MII_BUS_ID_SIZE + 3];
 302         char bus_id[MII_BUS_ID_SIZE];
 303
 304         priv->oldlink = 0;
 305         priv->speed = 0;
 306         priv->oldduplex = -1;
 307
 308         if (priv->phy_addr == -1) {
 309                 /* We don't have a PHY, so do nothing */
 310                 return 0;
 311         }
 312
 313         snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
 314         snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
 315                  priv->phy_addr);
 316         pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id);
 317
 318         phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
 319                         priv->phy_interface);
 320
 321         if (IS_ERR(phydev)) {
 322                 pr_err("%s: Could not attach to PHY\n", dev->name);
 323                 return PTR_ERR(phydev);
 324         }
 325
 326         /*
 327          * Broken HW is sometimes missing the pull-up resistor on the
 328          * MDIO line, which results in reads to non-existent devices returning
 329          * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
 330          * device as well.
 331          * Note: phydev->phy_id is the result of reading the UID PHY registers.
 332          */
 333         if (phydev->phy_id == 0) {
 334                 phy_disconnect(phydev);
 335                 return -ENODEV;
 336         }
 337         pr_debug("stmmac_init_phy:  %s: attached to PHY (UID 0x%x)"
 338                " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
 339
 340         priv->phydev = phydev;
 341
 342         return 0;
 343 }
 344
 345 static inline void stmmac_mac_enable_rx(unsigned long ioaddr)
 346 {
 347         u32 value = readl(ioaddr + MAC_CTRL_REG);
 348         value |= MAC_RNABLE_RX;
 349         /* Set the RE (receive enable bit into the MAC CTRL register).  */
 350         writel(value, ioaddr + MAC_CTRL_REG);
 351 }
 352
 353 static inline void stmmac_mac_enable_tx(unsigned long ioaddr)
 354 {
 355         u32 value = readl(ioaddr + MAC_CTRL_REG);
 356         value |= MAC_ENABLE_TX;
 357         /* Set the TE (transmit enable bit into the MAC CTRL register).  */
 358         writel(value, ioaddr + MAC_CTRL_REG);
 359 }
 360
 361 static inline void stmmac_mac_disable_rx(unsigned long ioaddr)
 362 {
 363         u32 value = readl(ioaddr + MAC_CTRL_REG);
 364         value &= ~MAC_RNABLE_RX;
 365         writel(value, ioaddr + MAC_CTRL_REG);
 366 }
 367
 368 static inline void stmmac_mac_disable_tx(unsigned long ioaddr)
 369 {
 370         u32 value = readl(ioaddr + MAC_CTRL_REG);
 371         value &= ~MAC_ENABLE_TX;
 372         writel(value, ioaddr + MAC_CTRL_REG);
 373 }
 374
 375 /**
 376  * display_ring
 377  * @p: pointer to the ring.
 378  * @size: size of the ring.
 379  * Description: display all the descriptors within the ring.
 380  */
 381 static void display_ring(struct dma_desc *p, int size)
 382 {
 383         struct tmp_s {
 384                 u64 a;
 385                 unsigned int b;
 386                 unsigned int c;
 387         };
 388         int i;
 389         for (i = 0; i < size; i++) {
 390                 struct tmp_s *x = (struct tmp_s *)(p + i);
 391                 pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
 392                        i, (unsigned int)virt_to_phys(&p[i]),
 393                        (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
 394                        x->b, x->c);
 395                 pr_info("\n");
 396         }
 397 }
 398
 399 /**
 400  * init_dma_desc_rings - init the RX/TX descriptor rings
 401  * @dev: net device structure
 402  * Description:  this function initializes the DMA RX/TX descriptors
 403  * and allocates the socket buffers.
 404  */
 405 static void init_dma_desc_rings(struct net_device *dev)
 406 {
 407         int i;
 408         struct stmmac_priv *priv = netdev_priv(dev);
 409         struct sk_buff *skb;
 410         unsigned int txsize = priv->dma_tx_size;
 411         unsigned int rxsize = priv->dma_rx_size;
 412         unsigned int bfsize = priv->dma_buf_sz;
 413         int buff2_needed = 0, dis_ic = 0;
 414
 415         /* Set the Buffer size according to the MTU;
 416          * indeed, in case of jumbo we need to bump-up the buffer sizes.
 417          */
 418         if (unlikely(dev->mtu >= BUF_SIZE_8KiB))
 419                 bfsize = BUF_SIZE_16KiB;
 420         else if (unlikely(dev->mtu >= BUF_SIZE_4KiB))
 421                 bfsize = BUF_SIZE_8KiB;
 422         else if (unlikely(dev->mtu >= BUF_SIZE_2KiB))
 423                 bfsize = BUF_SIZE_4KiB;
 424         else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE))
 425                 bfsize = BUF_SIZE_2KiB;
 426         else
 427                 bfsize = DMA_BUFFER_SIZE;
 428
 429 #ifdef CONFIG_STMMAC_TIMER
 430         /* Disable interrupts on completion for the reception if timer is on */
 431         if (likely(priv->tm->enable))
 432                 dis_ic = 1;
 433 #endif
 434         /* If the MTU exceeds 8k so use the second buffer in the chain */
 435         if (bfsize >= BUF_SIZE_8KiB)
 436                 buff2_needed = 1;
 437
 438         DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
 439             txsize, rxsize, bfsize);
 440
 441         priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
 442         priv->rx_skbuff =
 443             kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
 444         priv->dma_rx =
 445             (struct dma_desc *)dma_alloc_coherent(priv->device,
 446                                                   rxsize *
 447                                                   sizeof(struct dma_desc),
 448                                                   &priv->dma_rx_phy,
 449                                                   GFP_KERNEL);
 450         priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
 451                                        GFP_KERNEL);
 452         priv->dma_tx =
 453             (struct dma_desc *)dma_alloc_coherent(priv->device,
 454                                                   txsize *
 455                                                   sizeof(struct dma_desc),
 456                                                   &priv->dma_tx_phy,
 457                                                   GFP_KERNEL);
 458
 459         if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
 460                 pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
 461                 return;
 462         }
 463
 464         DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, "
 465             "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
 466             dev->name, priv->dma_rx, priv->dma_tx,
 467             (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
 468
 469         /* RX INITIALIZATION */
 470         DBG(probe, INFO, "stmmac: SKB addresses:\n"
 471                          "skb\t\tskb data\tdma data\n");
 472
 473         for (i = 0; i < rxsize; i++) {
 474                 struct dma_desc *p = priv->dma_rx + i;
 475
 476                 skb = netdev_alloc_skb_ip_align(dev, bfsize);
 477                 if (unlikely(skb == NULL)) {
 478                         pr_err("%s: Rx init fails; skb is NULL\n", __func__);
 479                         break;
 480                 }
 481                 priv->rx_skbuff[i] = skb;
 482                 priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
 483                                                 bfsize, DMA_FROM_DEVICE);
 484
 485                 p->des2 = priv->rx_skbuff_dma[i];
 486                 if (unlikely(buff2_needed))
 487                         p->des3 = p->des2 + BUF_SIZE_8KiB;
 488                 DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
 489                         priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
 490         }
 491         priv->cur_rx = 0;
 492         priv->dirty_rx = (unsigned int)(i - rxsize);
 493         priv->dma_buf_sz = bfsize;
 494         buf_sz = bfsize;
 495
 496         /* TX INITIALIZATION */
 497         for (i = 0; i < txsize; i++) {
 498                 priv->tx_skbuff[i] = NULL;
 499                 priv->dma_tx[i].des2 = 0;
 500         }
 501         priv->dirty_tx = 0;
 502         priv->cur_tx = 0;
 503
 504         /* Clear the Rx/Tx descriptors */
 505         priv->hw->desc->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
 506         priv->hw->desc->init_tx_desc(priv->dma_tx, txsize);
 507
 508         if (netif_msg_hw(priv)) {
 509                 pr_info("RX descriptor ring:\n");
 510                 display_ring(priv->dma_rx, rxsize);
 511                 pr_info("TX descriptor ring:\n");
 512                 display_ring(priv->dma_tx, txsize);
 513         }
 514 }
 515
 516 static void dma_free_rx_skbufs(struct stmmac_priv *priv)
 517 {
 518         int i;
 519
 520         for (i = 0; i < priv->dma_rx_size; i++) {
 521                 if (priv->rx_skbuff[i]) {
 522                         dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
 523                                          priv->dma_buf_sz, DMA_FROM_DEVICE);
 524                         dev_kfree_skb_any(priv->rx_skbuff[i]);
 525                 }
 526                 priv->rx_skbuff[i] = NULL;
 527         }
 528 }
 529
 530 static void dma_free_tx_skbufs(struct stmmac_priv *priv)
 531 {
 532         int i;
 533
 534         for (i = 0; i < priv->dma_tx_size; i++) {
 535                 if (priv->tx_skbuff[i] != NULL) {
 536                         struct dma_desc *p = priv->dma_tx + i;
 537                         if (p->des2)
 538                                 dma_unmap_single(priv->device, p->des2,
 539                                                  priv->hw->desc->get_tx_len(p),
 540                                                  DMA_TO_DEVICE);
 541                         dev_kfree_skb_any(priv->tx_skbuff[i]);
 542                         priv->tx_skbuff[i] = NULL;
 543                 }
 544         }
 545 }
 546
 547 static void free_dma_desc_resources(struct stmmac_priv *priv)
 548 {
 549         /* Release the DMA TX/RX socket buffers */
 550         dma_free_rx_skbufs(priv);
 551         dma_free_tx_skbufs(priv);
 552
 553         /* Free the region of consistent memory previously allocated for
 554          * the DMA */
 555         dma_free_coherent(priv->device,
 556                           priv->dma_tx_size * sizeof(struct dma_desc),
 557                           priv->dma_tx, priv->dma_tx_phy);
 558         dma_free_coherent(priv->device,
 559                           priv->dma_rx_size * sizeof(struct dma_desc),
 560                           priv->dma_rx, priv->dma_rx_phy);
 561         kfree(priv->rx_skbuff_dma);
 562         kfree(priv->rx_skbuff);
 563         kfree(priv->tx_skbuff);
 564 }
 565
 566 /**
 567  *  stmmac_dma_operation_mode - HW DMA operation mode
 568  *  @priv : pointer to the private device structure.
 569  *  Description: it sets the DMA operation mode: tx/rx DMA thresholds
 570  *  or Store-And-Forward capability. It also verifies the COE for the
 571  *  transmission in case of Giga ETH.
 572  */
 573 static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 574 {
 575         if (!priv->is_gmac) {
 576                 /* MAC 10/100 */
 577                 priv->hw->dma->dma_mode(priv->dev->base_addr, tc, 0);
 578                 priv->tx_coe = NO_HW_CSUM;
 579         } else {
 580                 if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
 581                         priv->hw->dma->dma_mode(priv->dev->base_addr,
 582                                                 SF_DMA_MODE, SF_DMA_MODE);
 583                         tc = SF_DMA_MODE;
 584                         priv->tx_coe = HW_CSUM;
 585                 } else {
 586                         /* Checksum computation is performed in software. */
 587                         priv->hw->dma->dma_mode(priv->dev->base_addr, tc,
 588                                                 SF_DMA_MODE);
 589                         priv->tx_coe = NO_HW_CSUM;
 590                 }
 591         }
 592         tx_coe = priv->tx_coe;
 593 }
 594
 595 /**
 596  * stmmac_tx:
 597  * @priv: private driver structure
 598  * Description: it reclaims resources after transmission completes.
 599  */
 600 static void stmmac_tx(struct stmmac_priv *priv)
 601 {
 602         unsigned int txsize = priv->dma_tx_size;
 603         unsigned long ioaddr = priv->dev->base_addr;
 604
 605         while (priv->dirty_tx != priv->cur_tx) {
 606                 int last;
 607                 unsigned int entry = priv->dirty_tx % txsize;
 608                 struct sk_buff *skb = priv->tx_skbuff[entry];
 609                 struct dma_desc *p = priv->dma_tx + entry;
 610
 611                 /* Check if the descriptor is owned by the DMA. */
 612                 if (priv->hw->desc->get_tx_owner(p))
 613                         break;
 614
 615                 /* Verify tx error by looking at the last segment */
 616                 last = priv->hw->desc->get_tx_ls(p);
 617                 if (likely(last)) {
 618                         int tx_error =
 619                                 priv->hw->desc->tx_status(&priv->dev->stats,
 620                                                           &priv->xstats, p,
 621                                                           ioaddr);
 622                         if (likely(tx_error == 0)) {
 623                                 priv->dev->stats.tx_packets++;
 624                                 priv->xstats.tx_pkt_n++;
 625                         } else
 626                                 priv->dev->stats.tx_errors++;
 627                 }
 628                 TX_DBG("%s: curr %d, dirty %d\n", __func__,
 629                         priv->cur_tx, priv->dirty_tx);
 630
 631                 if (likely(p->des2))
 632                         dma_unmap_single(priv->device, p->des2,
 633                                          priv->hw->desc->get_tx_len(p),
 634                                          DMA_TO_DEVICE);
 635                 if (unlikely(p->des3))
 636                         p->des3 = 0;
 637
 638                 if (likely(skb != NULL)) {
 639                         /*
 640                          * If there's room in the queue (limit it to size)
 641                          * we add this skb back into the pool,
 642                          * if it's the right size.
 643                          */
 644                         if ((skb_queue_len(&priv->rx_recycle) <
 645                                 priv->dma_rx_size) &&
 646                                 skb_recycle_check(skb, priv->dma_buf_sz))
 647                                 __skb_queue_head(&priv->rx_recycle, skb);
 648                         else
 649                                 dev_kfree_skb(skb);
 650
 651                         priv->tx_skbuff[entry] = NULL;
 652                 }
 653
 654                 priv->hw->desc->release_tx_desc(p);
 655
 656                 entry = (++priv->dirty_tx) % txsize;
 657         }
 658         if (unlikely(netif_queue_stopped(priv->dev) &&
 659                      stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
 660                 netif_tx_lock(priv->dev);
 661                 if (netif_queue_stopped(priv->dev) &&
 662                      stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
 663                         TX_DBG("%s: restart transmit\n", __func__);
 664                         netif_wake_queue(priv->dev);
 665                 }
 666                 netif_tx_unlock(priv->dev);
 667         }
 668 }
 669
 670 static inline void stmmac_enable_irq(struct stmmac_priv *priv)
 671 {
 672 #ifdef CONFIG_STMMAC_TIMER
 673         if (likely(priv->tm->enable))
 674                 priv->tm->timer_start(tmrate);
 675         else
 676 #endif
 677                 priv->hw->dma->enable_dma_irq(priv->dev->base_addr);
 678 }
 679
 680 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
 681 {
 682 #ifdef CONFIG_STMMAC_TIMER
 683         if (likely(priv->tm->enable))
 684                 priv->tm->timer_stop();
 685         else
 686 #endif
 687                 priv->hw->dma->disable_dma_irq(priv->dev->base_addr);
 688 }
 689
 690 static int stmmac_has_work(struct stmmac_priv *priv)
 691 {
 692         unsigned int has_work = 0;
 693         int rxret, tx_work = 0;
 694
 695         rxret = priv->hw->desc->get_rx_owner(priv->dma_rx +
 696                 (priv->cur_rx % priv->dma_rx_size));
 697
 698         if (priv->dirty_tx != priv->cur_tx)
 699                 tx_work = 1;
 700
 701         if (likely(!rxret || tx_work))
 702                 has_work = 1;
 703
 704         return has_work;
 705 }
 706
 707 static inline void _stmmac_schedule(struct stmmac_priv *priv)
 708 {
 709         if (likely(stmmac_has_work(priv))) {
 710                 stmmac_disable_irq(priv);
 711                 napi_schedule(&priv->napi);
 712         }
 713 }
 714
 715 #ifdef CONFIG_STMMAC_TIMER
 716 void stmmac_schedule(struct net_device *dev)
 717 {
 718         struct stmmac_priv *priv = netdev_priv(dev);
 719
 720         priv->xstats.sched_timer_n++;
 721
 722         _stmmac_schedule(priv);
 723 }
 724
 725 static void stmmac_no_timer_started(unsigned int x)
 726 {;
 727 };
 728
 729 static void stmmac_no_timer_stopped(void)
 730 {;
 731 };
 732 #endif
 733
 734 /**
 735  * stmmac_tx_err:
 736  * @priv: pointer to the private device structure
 737  * Description: it cleans the descriptors and restarts the transmission
 738  * in case of errors.
 739  */
 740 static void stmmac_tx_err(struct stmmac_priv *priv)
 741 {
 742         netif_stop_queue(priv->dev);
 743
 744         priv->hw->dma->stop_tx(priv->dev->base_addr);
 745         dma_free_tx_skbufs(priv);
 746         priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
 747         priv->dirty_tx = 0;
 748         priv->cur_tx = 0;
 749         priv->hw->dma->start_tx(priv->dev->base_addr);
 750
 751         priv->dev->stats.tx_errors++;
 752         netif_wake_queue(priv->dev);
 753 }
 754
 755
 756 static void stmmac_dma_interrupt(struct stmmac_priv *priv)
 757 {
 758         unsigned long ioaddr = priv->dev->base_addr;
 759         int status;
 760
 761         status = priv->hw->dma->dma_interrupt(priv->dev->base_addr,
 762                                               &priv->xstats);
 763         if (likely(status == handle_tx_rx))
 764                 _stmmac_schedule(priv);
 765
 766         else if (unlikely(status == tx_hard_error_bump_tc)) {
 767                 /* Try to bump up the dma threshold on this failure */
 768                 if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
 769                         tc += 64;
 770                         priv->hw->dma->dma_mode(ioaddr, tc, SF_DMA_MODE);
 771                         priv->xstats.threshold = tc;
 772                 }
 773                 stmmac_tx_err(priv);
 774         } else if (unlikely(status == tx_hard_error))
 775                 stmmac_tx_err(priv);
 776 }
 777
 778 /**
 779  *  stmmac_open - open entry point of the driver
 780  *  @dev : pointer to the device structure.
 781  *  Description:
 782  *  This function is the open entry point of the driver.
 783  *  Return value:
 784  *  0 on success and an appropriate (-)ve integer as defined in errno.h
 785  *  file on failure.
 786  */
 787 static int stmmac_open(struct net_device *dev)
 788 {
 789         struct stmmac_priv *priv = netdev_priv(dev);
 790         unsigned long ioaddr = dev->base_addr;
 791         int ret;
 792
 793         /* Check that the MAC address is valid.  If its not, refuse
 794          * to bring the device up. The user must specify an
 795          * address using the following linux command:
 796          *      ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx  */
 797         if (!is_valid_ether_addr(dev->dev_addr)) {
 798                 random_ether_addr(dev->dev_addr);
 799                 pr_warning("%s: generated random MAC address %pM\n", dev->name,
 800                         dev->dev_addr);
 801         }
 802
 803         stmmac_verify_args();
 804
 805         ret = stmmac_init_phy(dev);
 806         if (unlikely(ret)) {
 807                 pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
 808                 return ret;
 809         }
 810
 811         /* Request the IRQ lines */
 812         ret = request_irq(dev->irq, stmmac_interrupt,
 813                           IRQF_SHARED, dev->name, dev);
 814         if (unlikely(ret < 0)) {
 815                 pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
 816                        __func__, dev->irq, ret);
 817                 return ret;
 818         }
 819
 820 #ifdef CONFIG_STMMAC_TIMER
 821         priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
 822         if (unlikely(priv->tm == NULL)) {
 823                 pr_err("%s: ERROR: timer memory alloc failed\n", __func__);
 824                 return -ENOMEM;
 825         }
 826         priv->tm->freq = tmrate;
 827
 828         /* Test if the external timer can be actually used.
 829          * In case of failure continue without timer. */
 830         if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
 831                 pr_warning("stmmaceth: cannot attach the external timer.\n");
 832                 tmrate = 0;
 833                 priv->tm->freq = 0;
 834                 priv->tm->timer_start = stmmac_no_timer_started;
 835                 priv->tm->timer_stop = stmmac_no_timer_stopped;
 836         } else
 837                 priv->tm->enable = 1;
 838 #endif
 839
 840         /* Create and initialize the TX/RX descriptors chains. */
 841         priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
 842         priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
 843         priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
 844         init_dma_desc_rings(dev);
 845
 846         /* DMA initialization and SW reset */
 847         if (unlikely(priv->hw->dma->init(ioaddr, priv->pbl, priv->dma_tx_phy,
 848                                          priv->dma_rx_phy) < 0)) {
 849
 850                 pr_err("%s: DMA initialization failed\n", __func__);
 851                 return -1;
 852         }
 853
 854         /* Copy the MAC addr into the HW  */
 855         priv->hw->mac->set_umac_addr(ioaddr, dev->dev_addr, 0);
 856         /* If required, perform hw setup of the bus. */
 857         if (priv->bus_setup)
 858                 priv->bus_setup(ioaddr);
 859         /* Initialize the MAC Core */
 860         priv->hw->mac->core_init(ioaddr);
 861
 862         priv->shutdown = 0;
 863
 864         /* Initialise the MMC (if present) to disable all interrupts. */
 865         writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK);
 866         writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK);
 867
 868         /* Enable the MAC Rx/Tx */
 869         stmmac_mac_enable_rx(ioaddr);
 870         stmmac_mac_enable_tx(ioaddr);
 871
 872         /* Set the HW DMA mode and the COE */
 873         stmmac_dma_operation_mode(priv);
 874
 875         /* Extra statistics */
 876         memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
 877         priv->xstats.threshold = tc;
 878
 879         /* Start the ball rolling... */
 880         DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
 881         priv->hw->dma->start_tx(ioaddr);
 882         priv->hw->dma->start_rx(ioaddr);
 883
 884 #ifdef CONFIG_STMMAC_TIMER
 885         priv->tm->timer_start(tmrate);
 886 #endif
 887         /* Dump DMA/MAC registers */
 888         if (netif_msg_hw(priv)) {
 889                 priv->hw->mac->dump_regs(ioaddr);
 890                 priv->hw->dma->dump_regs(ioaddr);
 891         }
 892
 893         if (priv->phydev)
 894                 phy_start(priv->phydev);
 895
 896         napi_enable(&priv->napi);
 897         skb_queue_head_init(&priv->rx_recycle);
 898         netif_start_queue(dev);
 899         return 0;
 900 }
 901
 902 /**
 903  *  stmmac_release - close entry point of the driver
 904  *  @dev : device pointer.
 905  *  Description:
 906  *  This is the stop entry point of the driver.
 907  */
 908 static int stmmac_release(struct net_device *dev)
 909 {
 910         struct stmmac_priv *priv = netdev_priv(dev);
 911
 912         /* Stop and disconnect the PHY */
 913         if (priv->phydev) {
 914                 phy_stop(priv->phydev);
 915                 phy_disconnect(priv->phydev);
 916                 priv->phydev = NULL;
 917         }
 918
 919         netif_stop_queue(dev);
 920
 921 #ifdef CONFIG_STMMAC_TIMER
 922         /* Stop and release the timer */
 923         stmmac_close_ext_timer();
 924         if (priv->tm != NULL)
 925                 kfree(priv->tm);
 926 #endif
 927         napi_disable(&priv->napi);
 928         skb_queue_purge(&priv->rx_recycle);
 929
 930         /* Free the IRQ lines */
 931         free_irq(dev->irq, dev);
 932
 933         /* Stop TX/RX DMA and clear the descriptors */
 934         priv->hw->dma->stop_tx(dev->base_addr);
 935         priv->hw->dma->stop_rx(dev->base_addr);
 936
 937         /* Release and free the Rx/Tx resources */
 938         free_dma_desc_resources(priv);
 939
 940         /* Disable the MAC core */
 941         stmmac_mac_disable_tx(dev->base_addr);
 942         stmmac_mac_disable_rx(dev->base_addr);
 943
 944         netif_carrier_off(dev);
 945
 946         return 0;
 947 }
 948
 949 /*
 950  * To perform emulated hardware segmentation on skb.
 951  */
 952 static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
 953 {
 954         struct sk_buff *segs, *curr_skb;
 955         int gso_segs = skb_shinfo(skb)->gso_segs;
 956
 957         /* Estimate the number of fragments in the worst case */
 958         if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
 959                 netif_stop_queue(priv->dev);
 960                 TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
 961                        __func__);
 962                 if (stmmac_tx_avail(priv) < gso_segs)
 963                         return NETDEV_TX_BUSY;
 964
 965                 netif_wake_queue(priv->dev);
 966         }
 967         TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
 968                skb, skb->len);
 969
 970         segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
 971         if (unlikely(IS_ERR(segs)))
 972                 goto sw_tso_end;
 973
 974         do {
 975                 curr_skb = segs;
 976                 segs = segs->next;
 977                 TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
 978                        "*next %p\n", curr_skb->len, curr_skb, segs);
 979                 curr_skb->next = NULL;
 980                 stmmac_xmit(curr_skb, priv->dev);
 981         } while (segs);
 982
 983 sw_tso_end:
 984         dev_kfree_skb(skb);
 985
 986         return NETDEV_TX_OK;
 987 }
 988
 989 static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
 990                                                struct net_device *dev,
 991                                                int csum_insertion)
 992 {
 993         struct stmmac_priv *priv = netdev_priv(dev);
 994         unsigned int nopaged_len = skb_headlen(skb);
 995         unsigned int txsize = priv->dma_tx_size;
 996         unsigned int entry = priv->cur_tx % txsize;
 997         struct dma_desc *desc = priv->dma_tx + entry;
 998
 999         if (nopaged_len > BUF_SIZE_8KiB) {
1000
1001                 int buf2_size = nopaged_len - BUF_SIZE_8KiB;
1002
1003                 desc->des2 = dma_map_single(priv->device, skb->data,
1004                                             BUF_SIZE_8KiB, DMA_TO_DEVICE);
1005                 desc->des3 = desc->des2 + BUF_SIZE_4KiB;
1006                 priv->hw->desc->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
1007                                                 csum_insertion);
1008
1009                 entry = (++priv->cur_tx) % txsize;
1010                 desc = priv->dma_tx + entry;
1011
1012                 desc->des2 = dma_map_single(priv->device,
1013                                         skb->data + BUF_SIZE_8KiB,
1014                                         buf2_size, DMA_TO_DEVICE);
1015                 desc->des3 = desc->des2 + BUF_SIZE_4KiB;
1016                 priv->hw->desc->prepare_tx_desc(desc, 0, buf2_size,
1017                                                 csum_insertion);
1018                 priv->hw->desc->set_tx_owner(desc);
1019                 priv->tx_skbuff[entry] = NULL;
1020         } else {
1021                 desc->des2 = dma_map_single(priv->device, skb->data,
1022                                         nopaged_len, DMA_TO_DEVICE);
1023                 desc->des3 = desc->des2 + BUF_SIZE_4KiB;
1024                 priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
1025                                                 csum_insertion);
1026         }
1027         return entry;
1028 }
1029
1030 /**
1031  *  stmmac_xmit:
1032  *  @skb : the socket buffer
1033  *  @dev : device pointer
1034  *  Description : Tx entry point of the driver.
1035  */
1036 static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
1037 {
1038         struct stmmac_priv *priv = netdev_priv(dev);
1039         unsigned int txsize = priv->dma_tx_size;
1040         unsigned int entry;
1041         int i, csum_insertion = 0;
1042         int nfrags = skb_shinfo(skb)->nr_frags;
1043         struct dma_desc *desc, *first;
1044
1045         if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
1046                 if (!netif_queue_stopped(dev)) {
1047                         netif_stop_queue(dev);
1048                         /* This is a hard error, log it. */
1049                         pr_err("%s: BUG! Tx Ring full when queue awake\n",
1050                                 __func__);
1051                 }
1052                 return NETDEV_TX_BUSY;
1053         }
1054
1055         entry = priv->cur_tx % txsize;
1056
1057 #ifdef STMMAC_XMIT_DEBUG
1058         if ((skb->len > ETH_FRAME_LEN) || nfrags)
1059                 pr_info("stmmac xmit:\n"
1060                        "\tskb addr %p - len: %d - nopaged_len: %d\n"
1061                        "\tn_frags: %d - ip_summed: %d - %s gso\n",
1062                        skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed,
1063                        !skb_is_gso(skb) ? "isn't" : "is");
1064 #endif
1065
1066         if (unlikely(skb_is_gso(skb)))
1067                 return stmmac_sw_tso(priv, skb);
1068
1069         if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
1070                 if (likely(priv->tx_coe == NO_HW_CSUM))
1071                         skb_checksum_help(skb);
1072                 else
1073                         csum_insertion = 1;
1074         }
1075
1076         desc = priv->dma_tx + entry;
1077         first = desc;
1078
1079 #ifdef STMMAC_XMIT_DEBUG
1080         if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
1081                 pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
1082                        "\t\tn_frags: %d, ip_summed: %d\n",
1083                        skb->len, skb_headlen(skb), nfrags, skb->ip_summed);
1084 #endif
1085         priv->tx_skbuff[entry] = skb;
1086         if (unlikely(skb->len >= BUF_SIZE_4KiB)) {
1087                 entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion);
1088                 desc = priv->dma_tx + entry;
1089         } else {
1090                 unsigned int nopaged_len = skb_headlen(skb);
1091                 desc->des2 = dma_map_single(priv->device, skb->data,
1092                                         nopaged_len, DMA_TO_DEVICE);
1093                 priv->hw->desc->prepare_tx_desc(desc, 1, nopaged_len,
1094                                                 csum_insertion);
1095         }
1096
1097         for (i = 0; i < nfrags; i++) {
1098                 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1099                 int len = frag->size;
1100
1101                 entry = (++priv->cur_tx) % txsize;
1102                 desc = priv->dma_tx + entry;
1103
1104                 TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
1105                 desc->des2 = dma_map_page(priv->device, frag->page,
1106                                           frag->page_offset,
1107                                           len, DMA_TO_DEVICE);
1108                 priv->tx_skbuff[entry] = NULL;
1109                 priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
1110                 priv->hw->desc->set_tx_owner(desc);
1111         }
1112
1113         /* Interrupt on completition only for the latest segment */
1114         priv->hw->desc->close_tx_desc(desc);
1115
1116 #ifdef CONFIG_STMMAC_TIMER
1117         /* Clean IC while using timer */
1118         if (likely(priv->tm->enable))
1119                 priv->hw->desc->clear_tx_ic(desc);
1120 #endif
1121         /* To avoid raise condition */
1122         priv->hw->desc->set_tx_owner(first);
1123
1124         priv->cur_tx++;
1125
1126 #ifdef STMMAC_XMIT_DEBUG
1127         if (netif_msg_pktdata(priv)) {
1128                 pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
1129                        "first=%p, nfrags=%d\n",
1130                        (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
1131                        entry, first, nfrags);
1132                 display_ring(priv->dma_tx, txsize);
1133                 pr_info(">>> frame to be transmitted: ");
1134                 print_pkt(skb->data, skb->len);
1135         }
1136 #endif
1137         if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
1138                 TX_DBG("%s: stop transmitted packets\n", __func__);
1139                 netif_stop_queue(dev);
1140         }
1141
1142         dev->stats.tx_bytes += skb->len;
1143
1144         priv->hw->dma->enable_dma_transmission(dev->base_addr);
1145
1146         return NETDEV_TX_OK;
1147 }
1148
1149 static inline void stmmac_rx_refill(struct stmmac_priv *priv)
1150 {
1151         unsigned int rxsize = priv->dma_rx_size;
1152         int bfsize = priv->dma_buf_sz;
1153         struct dma_desc *p = priv->dma_rx;
1154
1155         for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
1156                 unsigned int entry = priv->dirty_rx % rxsize;
1157                 if (likely(priv->rx_skbuff[entry] == NULL)) {
1158                         struct sk_buff *skb;
1159
1160                         skb = __skb_dequeue(&priv->rx_recycle);
1161                         if (skb == NULL)
1162                                 skb = netdev_alloc_skb_ip_align(priv->dev,
1163                                                                 bfsize);
1164
1165                         if (unlikely(skb == NULL))
1166                                 break;
1167
1168                         priv->rx_skbuff[entry] = skb;
1169                         priv->rx_skbuff_dma[entry] =
1170                             dma_map_single(priv->device, skb->data, bfsize,
1171                                            DMA_FROM_DEVICE);
1172
1173                         (p + entry)->des2 = priv->rx_skbuff_dma[entry];
1174                         if (unlikely(priv->is_gmac)) {
1175                                 if (bfsize >= BUF_SIZE_8KiB)
1176                                         (p + entry)->des3 =
1177                                             (p + entry)->des2 + BUF_SIZE_8KiB;
1178                         }
1179                         RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
1180                 }
1181                 priv->hw->desc->set_rx_owner(p + entry);
1182         }
1183 }
1184
1185 static int stmmac_rx(struct stmmac_priv *priv, int limit)
1186 {
1187         unsigned int rxsize = priv->dma_rx_size;
1188         unsigned int entry = priv->cur_rx % rxsize;
1189         unsigned int next_entry;
1190         unsigned int count = 0;
1191         struct dma_desc *p = priv->dma_rx + entry;
1192         struct dma_desc *p_next;
1193
1194 #ifdef STMMAC_RX_DEBUG
1195         if (netif_msg_hw(priv)) {
1196                 pr_debug(">>> stmmac_rx: descriptor ring:\n");
1197                 display_ring(priv->dma_rx, rxsize);
1198         }
1199 #endif
1200         count = 0;
1201         while (!priv->hw->desc->get_rx_owner(p)) {
1202                 int status;
1203
1204                 if (count >= limit)
1205                         break;
1206
1207                 count++;
1208
1209                 next_entry = (++priv->cur_rx) % rxsize;
1210                 p_next = priv->dma_rx + next_entry;
1211                 prefetch(p_next);
1212
1213                 /* read the status of the incoming frame */
1214                 status = (priv->hw->desc->rx_status(&priv->dev->stats,
1215                                                     &priv->xstats, p));
1216                 if (unlikely(status == discard_frame))
1217                         priv->dev->stats.rx_errors++;
1218                 else {
1219                         struct sk_buff *skb;
1220                         /* Length should omit the CRC */
1221                         int frame_len = priv->hw->desc->get_rx_frame_len(p) - 4;
1222
1223 #ifdef STMMAC_RX_DEBUG
1224                         if (frame_len > ETH_FRAME_LEN)
1225                                 pr_debug("\tRX frame size %d, COE status: %d\n",
1226                                         frame_len, status);
1227
1228                         if (netif_msg_hw(priv))
1229                                 pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
1230                                         p, entry, p->des2);
1231 #endif
1232                         skb = priv->rx_skbuff[entry];
1233                         if (unlikely(!skb)) {
1234                                 pr_err("%s: Inconsistent Rx descriptor chain\n",
1235                                         priv->dev->name);
1236                                 priv->dev->stats.rx_dropped++;
1237                                 break;
1238                         }
1239                         prefetch(skb->data - NET_IP_ALIGN);
1240                         priv->rx_skbuff[entry] = NULL;
1241
1242                         skb_put(skb, frame_len);
1243                         dma_unmap_single(priv->device,
1244                                          priv->rx_skbuff_dma[entry],
1245                                          priv->dma_buf_sz, DMA_FROM_DEVICE);
1246 #ifdef STMMAC_RX_DEBUG
1247                         if (netif_msg_pktdata(priv)) {
1248                                 pr_info(" frame received (%dbytes)", frame_len);
1249                                 print_pkt(skb->data, frame_len);
1250                         }
1251 #endif
1252                         skb->protocol = eth_type_trans(skb, priv->dev);
1253
1254                         if (unlikely(status == csum_none)) {
1255                                 /* always for the old mac 10/100 */
1256                                 skb->ip_summed = CHECKSUM_NONE;
1257                                 netif_receive_skb(skb);
1258                         } else {
1259                                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1260                                 napi_gro_receive(&priv->napi, skb);
1261                         }
1262
1263                         priv->dev->stats.rx_packets++;
1264                         priv->dev->stats.rx_bytes += frame_len;
1265                 }
1266                 entry = next_entry;
1267                 p = p_next;     /* use prefetched values */
1268         }
1269
1270         stmmac_rx_refill(priv);
1271
1272         priv->xstats.rx_pkt_n += count;
1273
1274         return count;
1275 }
1276
1277 /**
1278  *  stmmac_poll - stmmac poll method (NAPI)
1279  *  @napi : pointer to the napi structure.
1280  *  @budget : maximum number of packets that the current CPU can receive from
1281  *            all interfaces.
1282  *  Description :
1283  *   This function implements the the reception process.
1284  *   Also it runs the TX completion thread
1285  */
1286 static int stmmac_poll(struct napi_struct *napi, int budget)
1287 {
1288         struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
1289         int work_done = 0;
1290
1291         priv->xstats.poll_n++;
1292         stmmac_tx(priv);
1293         work_done = stmmac_rx(priv, budget);
1294
1295         if (work_done < budget) {
1296                 napi_complete(napi);
1297                 stmmac_enable_irq(priv);
1298         }
1299         return work_done;
1300 }
1301
1302 /**
1303  *  stmmac_tx_timeout
1304  *  @dev : Pointer to net device structure
1305  *  Description: this function is called when a packet transmission fails to
1306  *   complete within a reasonable tmrate. The driver will mark the error in the
1307  *   netdev structure and arrange for the device to be reset to a sane state
1308  *   in order to transmit a new packet.
1309  */
1310 static void stmmac_tx_timeout(struct net_device *dev)
1311 {
1312         struct stmmac_priv *priv = netdev_priv(dev);
1313
1314         /* Clear Tx resources and restart transmitting again */
1315         stmmac_tx_err(priv);
1316 }
1317
1318 /* Configuration changes (passed on by ifconfig) */
1319 static int stmmac_config(struct net_device *dev, struct ifmap *map)
1320 {
1321         if (dev->flags & IFF_UP)        /* can't act on a running interface */
1322                 return -EBUSY;
1323
1324         /* Don't allow changing the I/O address */
1325         if (map->base_addr != dev->base_addr) {
1326                 pr_warning("%s: can't change I/O address\n", dev->name);
1327                 return -EOPNOTSUPP;
1328         }
1329
1330         /* Don't allow changing the IRQ */
1331         if (map->irq != dev->irq) {
1332                 pr_warning("%s: can't change IRQ number %d\n",
1333                        dev->name, dev->irq);
1334                 return -EOPNOTSUPP;
1335         }
1336
1337         /* ignore other fields */
1338         return 0;
1339 }
1340
1341 /**
1342  *  stmmac_multicast_list - entry point for multicast addressing
1343  *  @dev : pointer to the device structure
1344  *  Description:
1345  *  This function is a driver entry point which gets called by the kernel
1346  *  whenever multicast addresses must be enabled/disabled.
1347  *  Return value:
1348  *  void.
1349  */
1350 static void stmmac_multicast_list(struct net_device *dev)
1351 {
1352         struct stmmac_priv *priv = netdev_priv(dev);
1353
1354         spin_lock(&priv->lock);
1355         priv->hw->mac->set_filter(dev);
1356         spin_unlock(&priv->lock);
1357 }
1358
1359 /**
1360  *  stmmac_change_mtu - entry point to change MTU size for the device.
1361  *  @dev : device pointer.
1362  *  @new_mtu : the new MTU size for the device.
1363  *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
1364  *  to drive packet transmission. Ethernet has an MTU of 1500 octets
1365  *  (ETH_DATA_LEN). This value can be changed with ifconfig.
1366  *  Return value:
1367  *  0 on success and an appropriate (-)ve integer as defined in errno.h
1368  *  file on failure.
1369  */
1370 static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
1371 {
1372         struct stmmac_priv *priv = netdev_priv(dev);
1373         int max_mtu;
1374
1375         if (netif_running(dev)) {
1376                 pr_err("%s: must be stopped to change its MTU\n", dev->name);
1377                 return -EBUSY;
1378         }
1379
1380         if (priv->is_gmac)
1381                 max_mtu = JUMBO_LEN;
1382         else
1383                 max_mtu = ETH_DATA_LEN;
1384
1385         if ((new_mtu < 46) || (new_mtu > max_mtu)) {
1386                 pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
1387                 return -EINVAL;
1388         }
1389
1390         dev->mtu = new_mtu;
1391
1392         return 0;
1393 }
1394
1395 static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
1396 {
1397         struct net_device *dev = (struct net_device *)dev_id;
1398         struct stmmac_priv *priv = netdev_priv(dev);
1399
1400         if (unlikely(!dev)) {
1401                 pr_err("%s: invalid dev pointer\n", __func__);
1402                 return IRQ_NONE;
1403         }
1404
1405         if (priv->is_gmac) {
1406                 unsigned long ioaddr = dev->base_addr;
1407                 /* To handle GMAC own interrupts */
1408                 priv->hw->mac->host_irq_status(ioaddr);
1409         }
1410
1411         stmmac_dma_interrupt(priv);
1412
1413         return IRQ_HANDLED;
1414 }
1415
1416 #ifdef CONFIG_NET_POLL_CONTROLLER
1417 /* Polling receive - used by NETCONSOLE and other diagnostic tools
1418  * to allow network I/O with interrupts disabled. */
1419 static void stmmac_poll_controller(struct net_device *dev)
1420 {
1421         disable_irq(dev->irq);
1422         stmmac_interrupt(dev->irq, dev);
1423         enable_irq(dev->irq);
1424 }
1425 #endif
1426
1427 /**
1428  *  stmmac_ioctl - Entry point for the Ioctl
1429  *  @dev: Device pointer.
1430  *  @rq: An IOCTL specefic structure, that can contain a pointer to
1431  *  a proprietary structure used to pass information to the driver.
1432  *  @cmd: IOCTL command
1433  *  Description:
1434  *  Currently there are no special functionality supported in IOCTL, just the
1435  *  phy_mii_ioctl(...) can be invoked.
1436  */
1437 static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1438 {
1439         struct stmmac_priv *priv = netdev_priv(dev);
1440         int ret = -EOPNOTSUPP;
1441
1442         if (!netif_running(dev))
1443                 return -EINVAL;
1444
1445         switch (cmd) {
1446         case SIOCGMIIPHY:
1447         case SIOCGMIIREG:
1448         case SIOCSMIIREG:
1449                 if (!priv->phydev)
1450                         return -EINVAL;
1451
1452                 spin_lock(&priv->lock);
1453                 ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
1454                 spin_unlock(&priv->lock);
1455         default:
1456                 break;
1457         }
1458         return ret;
1459 }
1460
1461 #ifdef STMMAC_VLAN_TAG_USED
1462 static void stmmac_vlan_rx_register(struct net_device *dev,
1463                                     struct vlan_group *grp)
1464 {
1465         struct stmmac_priv *priv = netdev_priv(dev);
1466
1467         DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp);
1468
1469         spin_lock(&priv->lock);
1470         priv->vlgrp = grp;
1471         spin_unlock(&priv->lock);
1472 }
1473 #endif
1474
1475 static const struct net_device_ops stmmac_netdev_ops = {
1476         .ndo_open = stmmac_open,
1477         .ndo_start_xmit = stmmac_xmit,
1478         .ndo_stop = stmmac_release,
1479         .ndo_change_mtu = stmmac_change_mtu,
1480         .ndo_set_multicast_list = stmmac_multicast_list,
1481         .ndo_tx_timeout = stmmac_tx_timeout,
1482         .ndo_do_ioctl = stmmac_ioctl,
1483         .ndo_set_config = stmmac_config,
1484 #ifdef STMMAC_VLAN_TAG_USED
1485         .ndo_vlan_rx_register = stmmac_vlan_rx_register,
1486 #endif
1487 #ifdef CONFIG_NET_POLL_CONTROLLER
1488         .ndo_poll_controller = stmmac_poll_controller,
1489 #endif
1490         .ndo_set_mac_address = eth_mac_addr,
1491 };
1492
1493 /**
1494  * stmmac_probe - Initialization of the adapter .
1495  * @dev : device pointer
1496  * Description: The function initializes the network device structure for
1497  * the STMMAC driver. It also calls the low level routines
1498  * in order to init the HW (i.e. the DMA engine)
1499  */
1500 static int stmmac_probe(struct net_device *dev)
1501 {
1502         int ret = 0;
1503         struct stmmac_priv *priv = netdev_priv(dev);
1504
1505         ether_setup(dev);
1506
1507         dev->netdev_ops = &stmmac_netdev_ops;
1508         stmmac_set_ethtool_ops(dev);
1509
1510         dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
1511         dev->watchdog_timeo = msecs_to_jiffies(watchdog);
1512 #ifdef STMMAC_VLAN_TAG_USED
1513         /* Both mac100 and gmac support receive VLAN tag detection */
1514         dev->features |= NETIF_F_HW_VLAN_RX;
1515 #endif
1516         priv->msg_enable = netif_msg_init(debug, default_msg_level);
1517
1518         if (priv->is_gmac)
1519                 priv->rx_csum = 1;
1520
1521         if (flow_ctrl)
1522                 priv->flow_ctrl = FLOW_AUTO;    /* RX/TX pause on */
1523
1524         priv->pause = pause;
1525         netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
1526
1527         /* Get the MAC address */
1528         priv->hw->mac->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
1529
1530         if (!is_valid_ether_addr(dev->dev_addr))
1531                 pr_warning("\tno valid MAC address;"
1532                         "please, use ifconfig or nwhwconfig!\n");
1533
1534         ret = register_netdev(dev);
1535         if (ret) {
1536                 pr_err("%s: ERROR %i registering the device\n",
1537                        __func__, ret);
1538                 return -ENODEV;
1539         }
1540
1541         DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
1542             dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
1543             (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
1544
1545         spin_lock_init(&priv->lock);
1546
1547         return ret;
1548 }
1549
1550 /**
1551  * stmmac_mac_device_setup
1552  * @dev : device pointer
1553  * Description: select and initialise the mac device (mac100 or Gmac).
1554  */
1555 static int stmmac_mac_device_setup(struct net_device *dev)
1556 {
1557         struct stmmac_priv *priv = netdev_priv(dev);
1558         unsigned long ioaddr = dev->base_addr;
1559
1560         struct mac_device_info *device;
1561
1562         if (priv->is_gmac)
1563                 device = dwmac1000_setup(ioaddr);
1564         else
1565                 device = dwmac100_setup(ioaddr);
1566
1567         if (priv->enh_desc) {
1568                 device->desc = &enh_desc_ops;
1569                 pr_info("\tEnhanced descriptor structure\n");
1570         } else
1571                 device->desc = &ndesc_ops;
1572
1573         if (!device)
1574                 return -ENOMEM;
1575
1576         priv->hw = device;
1577
1578         priv->wolenabled = priv->hw->pmt;       /* PMT supported */
1579         if (priv->wolenabled == PMT_SUPPORTED)
1580                 priv->wolopts = WAKE_MAGIC;             /* Magic Frame */
1581
1582         return 0;
1583 }
1584
1585 static int stmmacphy_dvr_probe(struct platform_device *pdev)
1586 {
1587         struct plat_stmmacphy_data *plat_dat = pdev->dev.platform_data;
1588
1589         pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
1590                plat_dat->bus_id);
1591
1592         return 0;
1593 }
1594
1595 static int stmmacphy_dvr_remove(struct platform_device *pdev)
1596 {
1597         return 0;
1598 }
1599
1600 static struct platform_driver stmmacphy_driver = {
1601         .driver = {
1602                    .name = PHY_RESOURCE_NAME,
1603                    },
1604         .probe = stmmacphy_dvr_probe,
1605         .remove = stmmacphy_dvr_remove,
1606 };
1607
1608 /**
1609  * stmmac_associate_phy
1610  * @dev: pointer to device structure
1611  * @data: points to the private structure.
1612  * Description: Scans through all the PHYs we have registered and checks if
1613  * any are associated with our MAC.  If so, then just fill in
1614  * the blanks in our local context structure
1615  */
1616 static int stmmac_associate_phy(struct device *dev, void *data)
1617 {
1618         struct stmmac_priv *priv = (struct stmmac_priv *)data;
1619         struct plat_stmmacphy_data *plat_dat = dev->platform_data;
1620
1621         DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
1622                 plat_dat->bus_id);
1623
1624         /* Check that this phy is for the MAC being initialised */
1625         if (priv->bus_id != plat_dat->bus_id)
1626                 return 0;
1627
1628         /* OK, this PHY is connected to the MAC.
1629            Go ahead and get the parameters */
1630         DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__);
1631         priv->phy_irq =
1632             platform_get_irq_byname(to_platform_device(dev), "phyirq");
1633         DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__,
1634             plat_dat->bus_id, priv->phy_irq);
1635
1636         /* Override with kernel parameters if supplied XXX CRS XXX
1637          * this needs to have multiple instances */
1638         if ((phyaddr >= 0) && (phyaddr <= 31))
1639                 plat_dat->phy_addr = phyaddr;
1640
1641         priv->phy_addr = plat_dat->phy_addr;
1642         priv->phy_mask = plat_dat->phy_mask;
1643         priv->phy_interface = plat_dat->interface;
1644         priv->phy_reset = plat_dat->phy_reset;
1645
1646         DBG(probe, DEBUG, "%s: exiting\n", __func__);
1647         return 1;       /* forces exit of driver_for_each_device() */
1648 }
1649
1650 /**
1651  * stmmac_dvr_probe
1652  * @pdev: platform device pointer
1653  * Description: the driver is initialized through platform_device.
1654  */
1655 static int stmmac_dvr_probe(struct platform_device *pdev)
1656 {
1657         int ret = 0;
1658         struct resource *res;
1659         unsigned int *addr = NULL;
1660         struct net_device *ndev = NULL;
1661         struct stmmac_priv *priv;
1662         struct plat_stmmacenet_data *plat_dat;
1663
1664         pr_info("STMMAC driver:\n\tplatform registration... ");
1665         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1666         if (!res) {
1667                 ret = -ENODEV;
1668                 goto out;
1669         }
1670         pr_info("done!\n");
1671
1672         if (!request_mem_region(res->start, resource_size(res),
1673                                 pdev->name)) {
1674                 pr_err("%s: ERROR: memory allocation failed"
1675                        "cannot get the I/O addr 0x%x\n",
1676                        __func__, (unsigned int)res->start);
1677                 ret = -EBUSY;
1678                 goto out;
1679         }
1680
1681         addr = ioremap(res->start, resource_size(res));
1682         if (!addr) {
1683                 pr_err("%s: ERROR: memory mapping failed\n", __func__);
1684                 ret = -ENOMEM;
1685                 goto out;
1686         }
1687
1688         ndev = alloc_etherdev(sizeof(struct stmmac_priv));
1689         if (!ndev) {
1690                 pr_err("%s: ERROR: allocating the device\n", __func__);
1691                 ret = -ENOMEM;
1692                 goto out;
1693         }
1694
1695         SET_NETDEV_DEV(ndev, &pdev->dev);
1696
1697         /* Get the MAC information */
1698         ndev->irq = platform_get_irq_byname(pdev, "macirq");
1699         if (ndev->irq == -ENXIO) {
1700                 pr_err("%s: ERROR: MAC IRQ configuration "
1701                        "information not found\n", __func__);
1702                 ret = -ENODEV;
1703                 goto out;
1704         }
1705
1706         priv = netdev_priv(ndev);
1707         priv->device = &(pdev->dev);
1708         priv->dev = ndev;
1709         plat_dat = pdev->dev.platform_data;
1710         priv->bus_id = plat_dat->bus_id;
1711         priv->pbl = plat_dat->pbl;      /* TLI */
1712         priv->is_gmac = plat_dat->has_gmac;     /* GMAC is on board */
1713         priv->enh_desc = plat_dat->enh_desc;
1714
1715         platform_set_drvdata(pdev, ndev);
1716
1717         /* Set the I/O base addr */
1718         ndev->base_addr = (unsigned long)addr;
1719
1720         /* Verify embedded resource for the platform */
1721         ret = stmmac_claim_resource(pdev);
1722         if (ret < 0)
1723                 goto out;
1724
1725         /* MAC HW revice detection */
1726         ret = stmmac_mac_device_setup(ndev);
1727         if (ret < 0)
1728                 goto out;
1729
1730         /* Network Device Registration */
1731         ret = stmmac_probe(ndev);
1732         if (ret < 0)
1733                 goto out;
1734
1735         /* associate a PHY - it is provided by another platform bus */
1736         if (!driver_for_each_device
1737             (&(stmmacphy_driver.driver), NULL, (void *)priv,
1738              stmmac_associate_phy)) {
1739                 pr_err("No PHY device is associated with this MAC!\n");
1740                 ret = -ENODEV;
1741                 goto out;
1742         }
1743
1744         priv->fix_mac_speed = plat_dat->fix_mac_speed;
1745         priv->bus_setup = plat_dat->bus_setup;
1746         priv->bsp_priv = plat_dat->bsp_priv;
1747
1748         pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
1749                "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name,
1750                pdev->id, ndev->irq, (unsigned int)addr);
1751
1752         /* MDIO bus Registration */
1753         pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
1754         ret = stmmac_mdio_register(ndev);
1755         if (ret < 0)
1756                 goto out;
1757         pr_debug("registered!\n");
1758
1759 out:
1760         if (ret < 0) {
1761                 platform_set_drvdata(pdev, NULL);
1762                 release_mem_region(res->start, resource_size(res));
1763                 if (addr != NULL)
1764                         iounmap(addr);
1765         }
1766
1767         return ret;
1768 }
1769
1770 /**
1771  * stmmac_dvr_remove
1772  * @pdev: platform device pointer
1773  * Description: this function resets the TX/RX processes, disables the MAC RX/TX
1774  * changes the link status, releases the DMA descriptor rings,
1775  * unregisters the MDIO bus and unmaps the allocated memory.
1776  */
1777 static int stmmac_dvr_remove(struct platform_device *pdev)
1778 {
1779         struct net_device *ndev = platform_get_drvdata(pdev);
1780         struct stmmac_priv *priv = netdev_priv(ndev);
1781         struct resource *res;
1782
1783         pr_info("%s:\n\tremoving driver", __func__);
1784
1785         priv->hw->dma->stop_rx(ndev->base_addr);
1786         priv->hw->dma->stop_tx(ndev->base_addr);
1787
1788         stmmac_mac_disable_rx(ndev->base_addr);
1789         stmmac_mac_disable_tx(ndev->base_addr);
1790
1791         netif_carrier_off(ndev);
1792
1793         stmmac_mdio_unregister(ndev);
1794
1795         platform_set_drvdata(pdev, NULL);
1796         unregister_netdev(ndev);
1797
1798         iounmap((void *)ndev->base_addr);
1799         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1800         release_mem_region(res->start, resource_size(res));
1801
1802         free_netdev(ndev);
1803
1804         return 0;
1805 }
1806
1807 #ifdef CONFIG_PM
1808 static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
1809 {
1810         struct net_device *dev = platform_get_drvdata(pdev);
1811         struct stmmac_priv *priv = netdev_priv(dev);
1812         int dis_ic = 0;
1813
1814         if (!dev || !netif_running(dev))
1815                 return 0;
1816
1817         spin_lock(&priv->lock);
1818
1819         if (state.event == PM_EVENT_SUSPEND) {
1820                 netif_device_detach(dev);
1821                 netif_stop_queue(dev);
1822                 if (priv->phydev)
1823                         phy_stop(priv->phydev);
1824
1825 #ifdef CONFIG_STMMAC_TIMER
1826                 priv->tm->timer_stop();
1827                 if (likely(priv->tm->enable))
1828                         dis_ic = 1;
1829 #endif
1830                 napi_disable(&priv->napi);
1831
1832                 /* Stop TX/RX DMA */
1833                 priv->hw->dma->stop_tx(dev->base_addr);
1834                 priv->hw->dma->stop_rx(dev->base_addr);
1835                 /* Clear the Rx/Tx descriptors */
1836                 priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
1837                                              dis_ic);
1838                 priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
1839
1840                 stmmac_mac_disable_tx(dev->base_addr);
1841
1842                 if (device_may_wakeup(&(pdev->dev))) {
1843                         /* Enable Power down mode by programming the PMT regs */
1844                         if (priv->wolenabled == PMT_SUPPORTED)
1845                                 priv->hw->mac->pmt(dev->base_addr,
1846                                                    priv->wolopts);
1847                 } else {
1848                         stmmac_mac_disable_rx(dev->base_addr);
1849                 }
1850         } else {
1851                 priv->shutdown = 1;
1852                 /* Although this can appear slightly redundant it actually
1853                  * makes fast the standby operation and guarantees the driver
1854                  * working if hibernation is on media. */
1855                 stmmac_release(dev);
1856         }
1857
1858         spin_unlock(&priv->lock);
1859         return 0;
1860 }
1861
1862 static int stmmac_resume(struct platform_device *pdev)
1863 {
1864         struct net_device *dev = platform_get_drvdata(pdev);
1865         struct stmmac_priv *priv = netdev_priv(dev);
1866         unsigned long ioaddr = dev->base_addr;
1867
1868         if (!netif_running(dev))
1869                 return 0;
1870
1871         spin_lock(&priv->lock);
1872
1873         if (priv->shutdown) {
1874                 /* Re-open the interface and re-init the MAC/DMA
1875                    and the rings. */
1876                 stmmac_open(dev);
1877                 goto out_resume;
1878         }
1879
1880         /* Power Down bit, into the PM register, is cleared
1881          * automatically as soon as a magic packet or a Wake-up frame
1882          * is received. Anyway, it's better to manually clear
1883          * this bit because it can generate problems while resuming
1884          * from another devices (e.g. serial console). */
1885         if (device_may_wakeup(&(pdev->dev)))
1886                 if (priv->wolenabled == PMT_SUPPORTED)
1887                         priv->hw->mac->pmt(dev->base_addr, 0);
1888
1889         netif_device_attach(dev);
1890
1891         /* Enable the MAC and DMA */
1892         stmmac_mac_enable_rx(ioaddr);
1893         stmmac_mac_enable_tx(ioaddr);
1894         priv->hw->dma->start_tx(ioaddr);
1895         priv->hw->dma->start_rx(ioaddr);
1896
1897 #ifdef CONFIG_STMMAC_TIMER
1898         priv->tm->timer_start(tmrate);
1899 #endif
1900         napi_enable(&priv->napi);
1901
1902         if (priv->phydev)
1903                 phy_start(priv->phydev);
1904
1905         netif_start_queue(dev);
1906
1907 out_resume:
1908         spin_unlock(&priv->lock);
1909         return 0;
1910 }
1911 #endif
1912
1913 static struct platform_driver stmmac_driver = {
1914         .driver = {
1915                    .name = STMMAC_RESOURCE_NAME,
1916                    },
1917         .probe = stmmac_dvr_probe,
1918         .remove = stmmac_dvr_remove,
1919 #ifdef CONFIG_PM
1920         .suspend = stmmac_suspend,
1921         .resume = stmmac_resume,
1922 #endif
1923
1924 };
1925
1926 /**
1927  * stmmac_init_module - Entry point for the driver
1928  * Description: This function is the entry point for the driver.
1929  */
1930 static int __init stmmac_init_module(void)
1931 {
1932         int ret;
1933
1934         if (platform_driver_register(&stmmacphy_driver)) {
1935                 pr_err("No PHY devices registered!\n");
1936                 return -ENODEV;
1937         }
1938
1939         ret = platform_driver_register(&stmmac_driver);
1940         return ret;
1941 }
1942
1943 /**
1944  * stmmac_cleanup_module - Cleanup routine for the driver
1945  * Description: This function is the cleanup routine for the driver.
1946  */
1947 static void __exit stmmac_cleanup_module(void)
1948 {
1949         platform_driver_unregister(&stmmacphy_driver);
1950         platform_driver_unregister(&stmmac_driver);
1951 }
1952
1953 #ifndef MODULE
1954 static int __init stmmac_cmdline_opt(char *str)
1955 {
1956         char *opt;
1957
1958         if (!str || !*str)
1959                 return -EINVAL;
1960         while ((opt = strsep(&str, ",")) != NULL) {
1961                 if (!strncmp(opt, "debug:", 6))
1962                         strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
1963                 else if (!strncmp(opt, "phyaddr:", 8))
1964                         strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
1965                 else if (!strncmp(opt, "dma_txsize:", 11))
1966                         strict_strtoul(opt + 11, 0,
1967                                        (unsigned long *)&dma_txsize);
1968                 else if (!strncmp(opt, "dma_rxsize:", 11))
1969                         strict_strtoul(opt + 11, 0,
1970                                        (unsigned long *)&dma_rxsize);
1971                 else if (!strncmp(opt, "buf_sz:", 7))
1972                         strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
1973                 else if (!strncmp(opt, "tc:", 3))
1974                         strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
1975                 else if (!strncmp(opt, "tx_coe:", 7))
1976                         strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
1977                 else if (!strncmp(opt, "watchdog:", 9))
1978                         strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
1979                 else if (!strncmp(opt, "flow_ctrl:", 10))
1980                         strict_strtoul(opt + 10, 0,
1981                                        (unsigned long *)&flow_ctrl);
1982                 else if (!strncmp(opt, "pause:", 6))
1983                         strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
1984 #ifdef CONFIG_STMMAC_TIMER
1985                 else if (!strncmp(opt, "tmrate:", 7))
1986                         strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
1987 #endif
1988         }
1989         return 0;
1990 }
1991
1992 __setup("stmmaceth=", stmmac_cmdline_opt);
1993 #endif
1994
1995 module_init(stmmac_init_module);
1996 module_exit(stmmac_cleanup_module);
1997
1998 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver");
1999 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
2000 MODULE_LICENSE("GPL");