2 * Copyright (C) 2009 Renesas Solutions Corp.
4 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mtd/physmap.h>
15 #include <linux/gpio.h>
16 #include <linux/interrupt.h>
18 #include <linux/delay.h>
19 #include <linux/usb/r8a66597.h>
20 #include <linux/i2c.h>
21 #include <linux/i2c/tsc2007.h>
22 #include <linux/spi/spi.h>
23 #include <linux/spi/sh_msiof.h>
24 #include <linux/spi/mmc_spi.h>
25 #include <linux/mmc/host.h>
26 #include <linux/input.h>
27 #include <linux/input/sh_keysc.h>
28 #include <linux/mfd/sh_mobile_sdhi.h>
29 #include <video/sh_mobile_lcdc.h>
30 #include <sound/sh_fsi.h>
31 #include <media/sh_mobile_ceu.h>
32 #include <media/tw9910.h>
33 #include <media/mt9t112.h>
34 #include <asm/heartbeat.h>
35 #include <asm/sh_eth.h>
36 #include <asm/clock.h>
37 #include <asm/suspend.h>
38 #include <cpu/sh7724.h>
41 * Address Interface BusWidth
42 *-----------------------------------------
43 * 0x0000_0000 uboot 16bit
44 * 0x0004_0000 Linux romImage 16bit
45 * 0x0014_0000 MTD for Linux 16bit
46 * 0x0400_0000 Internal I/O 16/32bit
47 * 0x0800_0000 DRAM 32bit
48 * 0x1800_0000 MFI 16bit
52 *------------------------------
53 * DS2[1] = FlashROM write protect ON : write protect
54 * OFF : No write protect
55 * DS2[2] = RMII / TS, SCIF ON : RMII
57 * DS2[3] = Camera / Video ON : Camera
59 * DS2[5] = NTSC_OUT Clock ON : On board OSC
61 * DS2[6-7] = MMC / SD ON-OFF : SD
66 static unsigned char led_pos[] = { 0, 1, 2, 3 };
67 static struct heartbeat_data heartbeat_data = {
73 static struct resource heartbeat_resources[] = {
75 .start = 0xA405012C, /* PTG */
76 .end = 0xA405012E - 1,
77 .flags = IORESOURCE_MEM,
81 static struct platform_device heartbeat_device = {
85 .platform_data = &heartbeat_data,
87 .num_resources = ARRAY_SIZE(heartbeat_resources),
88 .resource = heartbeat_resources,
92 static struct mtd_partition nor_flash_partitions[] = {
94 .name = "boot loader",
96 .size = (5 * 1024 * 1024),
97 .mask_flags = MTD_WRITEABLE, /* force read-only */
100 .offset = MTDPART_OFS_APPEND,
101 .size = MTDPART_SIZ_FULL,
105 static struct physmap_flash_data nor_flash_data = {
107 .parts = nor_flash_partitions,
108 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
111 static struct resource nor_flash_resources[] = {
116 .flags = IORESOURCE_MEM,
120 static struct platform_device nor_flash_device = {
121 .name = "physmap-flash",
122 .resource = nor_flash_resources,
123 .num_resources = ARRAY_SIZE(nor_flash_resources),
125 .platform_data = &nor_flash_data,
130 #define SH_ETH_ADDR (0xA4600000)
131 static struct resource sh_eth_resources[] = {
133 .start = SH_ETH_ADDR,
134 .end = SH_ETH_ADDR + 0x1FC,
135 .flags = IORESOURCE_MEM,
139 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
143 struct sh_eth_plat_data sh_eth_plat = {
144 .phy = 0x1f, /* SMSC LAN8700 */
145 .edmac_endian = EDMAC_LITTLE_ENDIAN,
146 .ether_link_active_low = 1
149 static struct platform_device sh_eth_device = {
153 .platform_data = &sh_eth_plat,
155 .num_resources = ARRAY_SIZE(sh_eth_resources),
156 .resource = sh_eth_resources,
158 .hwblk_id = HWBLK_ETHER,
163 void usb0_port_power(int port, int power)
165 gpio_set_value(GPIO_PTB4, power);
168 static struct r8a66597_platdata usb0_host_data = {
170 .port_power = usb0_port_power,
173 static struct resource usb0_host_resources[] = {
176 .end = 0xa4d80124 - 1,
177 .flags = IORESOURCE_MEM,
182 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
186 static struct platform_device usb0_host_device = {
187 .name = "r8a66597_hcd",
190 .dma_mask = NULL, /* not use dma */
191 .coherent_dma_mask = 0xffffffff,
192 .platform_data = &usb0_host_data,
194 .num_resources = ARRAY_SIZE(usb0_host_resources),
195 .resource = usb0_host_resources,
198 /* USB1 host/function */
199 void usb1_port_power(int port, int power)
201 gpio_set_value(GPIO_PTB5, power);
204 static struct r8a66597_platdata usb1_common_data = {
206 .port_power = usb1_port_power,
209 static struct resource usb1_common_resources[] = {
212 .end = 0xa4d90124 - 1,
213 .flags = IORESOURCE_MEM,
218 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
222 static struct platform_device usb1_common_device = {
223 /* .name will be added in arch_setup */
226 .dma_mask = NULL, /* not use dma */
227 .coherent_dma_mask = 0xffffffff,
228 .platform_data = &usb1_common_data,
230 .num_resources = ARRAY_SIZE(usb1_common_resources),
231 .resource = usb1_common_resources,
235 static struct sh_mobile_lcdc_info lcdc_info = {
237 .interface_type = RGB18,
238 .chan = LCDC_CHAN_MAINLCD,
241 .sync = 0, /* hsync and vsync are active low */
243 .lcd_size_cfg = { /* 7.0 inch */
252 static struct resource lcdc_resources[] = {
257 .flags = IORESOURCE_MEM,
261 .flags = IORESOURCE_IRQ,
265 static struct platform_device lcdc_device = {
266 .name = "sh_mobile_lcdc_fb",
267 .num_resources = ARRAY_SIZE(lcdc_resources),
268 .resource = lcdc_resources,
270 .platform_data = &lcdc_info,
273 .hwblk_id = HWBLK_LCDC,
278 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
279 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
282 static struct resource ceu0_resources[] = {
287 .flags = IORESOURCE_MEM,
291 .flags = IORESOURCE_IRQ,
294 /* place holder for contiguous memory */
298 static struct platform_device ceu0_device = {
299 .name = "sh_mobile_ceu",
300 .id = 0, /* "ceu0" clock */
301 .num_resources = ARRAY_SIZE(ceu0_resources),
302 .resource = ceu0_resources,
304 .platform_data = &sh_mobile_ceu0_info,
307 .hwblk_id = HWBLK_CEU0,
312 static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
313 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
316 static struct resource ceu1_resources[] = {
321 .flags = IORESOURCE_MEM,
325 .flags = IORESOURCE_IRQ,
328 /* place holder for contiguous memory */
332 static struct platform_device ceu1_device = {
333 .name = "sh_mobile_ceu",
334 .id = 1, /* "ceu1" clock */
335 .num_resources = ARRAY_SIZE(ceu1_resources),
336 .resource = ceu1_resources,
338 .platform_data = &sh_mobile_ceu1_info,
341 .hwblk_id = HWBLK_CEU1,
346 static struct i2c_board_info i2c0_devices[] = {
348 I2C_BOARD_INFO("da7210", 0x1a),
352 static struct i2c_board_info i2c1_devices[] = {
354 I2C_BOARD_INFO("r2025sd", 0x32),
357 I2C_BOARD_INFO("lis3lv02d", 0x1c),
363 static struct sh_keysc_info keysc_info = {
364 .mode = SH_KEYSC_MODE_1,
368 .keycodes = { KEY_1, 0, 0, 0, 0,
373 KEY_6, 0, 0, 0, 0, },
376 static struct resource keysc_resources[] = {
381 .flags = IORESOURCE_MEM,
385 .flags = IORESOURCE_IRQ,
389 static struct platform_device keysc_device = {
391 .id = 0, /* keysc0 clock */
392 .num_resources = ARRAY_SIZE(keysc_resources),
393 .resource = keysc_resources,
395 .platform_data = &keysc_info,
398 .hwblk_id = HWBLK_KEYSC,
404 static int ts_get_pendown_state(void)
407 gpio_free(GPIO_FN_INTC_IRQ0);
408 gpio_request(GPIO_PTZ0, NULL);
409 gpio_direction_input(GPIO_PTZ0);
411 val = gpio_get_value(GPIO_PTZ0);
413 gpio_free(GPIO_PTZ0);
414 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
419 static int ts_init(void)
421 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
425 struct tsc2007_platform_data tsc2007_info = {
428 .get_pendown_state = ts_get_pendown_state,
429 .init_platform_hw = ts_init,
432 static struct i2c_board_info ts_i2c_clients = {
433 I2C_BOARD_INFO("tsc2007", 0x48),
435 .platform_data = &tsc2007_info,
439 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
441 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
443 gpio_set_value(GPIO_PTB6, state);
446 static struct sh_mobile_sdhi_info sdhi0_info = {
447 .set_pwr = sdhi0_set_pwr,
450 static struct resource sdhi0_resources[] = {
455 .flags = IORESOURCE_MEM,
459 .flags = IORESOURCE_IRQ,
463 static struct platform_device sdhi0_device = {
464 .name = "sh_mobile_sdhi",
465 .num_resources = ARRAY_SIZE(sdhi0_resources),
466 .resource = sdhi0_resources,
469 .platform_data = &sdhi0_info,
472 .hwblk_id = HWBLK_SDHI0,
477 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
479 gpio_set_value(GPIO_PTB7, state);
482 static struct sh_mobile_sdhi_info sdhi1_info = {
483 .set_pwr = sdhi1_set_pwr,
486 static struct resource sdhi1_resources[] = {
491 .flags = IORESOURCE_MEM,
495 .flags = IORESOURCE_IRQ,
499 static struct platform_device sdhi1_device = {
500 .name = "sh_mobile_sdhi",
501 .num_resources = ARRAY_SIZE(sdhi1_resources),
502 .resource = sdhi1_resources,
505 .platform_data = &sdhi1_info,
508 .hwblk_id = HWBLK_SDHI1,
515 static int mmc_spi_get_ro(struct device *dev)
517 return gpio_get_value(GPIO_PTY6);
520 static int mmc_spi_get_cd(struct device *dev)
522 return !gpio_get_value(GPIO_PTY7);
525 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
527 gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
530 static struct mmc_spi_platform_data mmc_spi_info = {
531 .get_ro = mmc_spi_get_ro,
532 .get_cd = mmc_spi_get_cd,
533 .caps = MMC_CAP_NEEDS_POLL,
534 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
535 .setpower = mmc_spi_setpower,
538 static struct spi_board_info spi_bus[] = {
540 .modalias = "mmc_spi",
541 .platform_data = &mmc_spi_info,
542 .max_speed_hz = 5000000,
544 .controller_data = (void *) GPIO_PTM4,
549 static struct sh_msiof_spi_info msiof0_data = {
553 static struct resource msiof0_resources[] = {
558 .flags = IORESOURCE_MEM,
562 .flags = IORESOURCE_IRQ,
566 static struct platform_device msiof0_device = {
567 .name = "spi_sh_msiof",
568 .id = 0, /* MSIOF0 */
570 .platform_data = &msiof0_data,
572 .num_resources = ARRAY_SIZE(msiof0_resources),
573 .resource = msiof0_resources,
575 .hwblk_id = HWBLK_MSIOF0,
581 /* I2C Video/Camera */
582 static struct i2c_board_info i2c_camera[] = {
584 I2C_BOARD_INFO("tw9910", 0x45),
588 I2C_BOARD_INFO("mt9t112", 0x3c),
592 I2C_BOARD_INFO("mt9t112", 0x3c),
597 static int tw9910_power(struct device *dev, int mode)
599 int val = mode ? 0 : 1;
601 gpio_set_value(GPIO_PTU2, val);
608 static struct tw9910_video_info tw9910_info = {
609 .buswidth = SOCAM_DATAWIDTH_8,
610 .mpout = TW9910_MPO_FIELD,
613 static struct soc_camera_link tw9910_link = {
616 .power = tw9910_power,
617 .board_info = &i2c_camera[0],
618 .module_name = "tw9910",
619 .priv = &tw9910_info,
623 static int mt9t112_power1(struct device *dev, int mode)
625 gpio_set_value(GPIO_PTA3, mode);
632 static struct mt9t112_camera_info mt9t112_info1 = {
633 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
634 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
637 static struct soc_camera_link mt9t112_link1 = {
639 .power = mt9t112_power1,
641 .board_info = &i2c_camera[1],
642 .module_name = "mt9t112",
643 .priv = &mt9t112_info1,
646 static int mt9t112_power2(struct device *dev, int mode)
648 gpio_set_value(GPIO_PTA4, mode);
655 static struct mt9t112_camera_info mt9t112_info2 = {
656 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
657 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
660 static struct soc_camera_link mt9t112_link2 = {
662 .power = mt9t112_power2,
664 .board_info = &i2c_camera[2],
665 .module_name = "mt9t112",
666 .priv = &mt9t112_info2,
669 static struct platform_device camera_devices[] = {
671 .name = "soc-camera-pdrv",
674 .platform_data = &tw9910_link,
678 .name = "soc-camera-pdrv",
681 .platform_data = &mt9t112_link1,
685 .name = "soc-camera-pdrv",
688 .platform_data = &mt9t112_link2,
695 * FSI-B use external clock which came from da7210.
696 * So, we should change parent of fsi
698 #define FCLKBCR 0xa415000c
699 static void fsimck_init(struct clk *clk)
701 u32 status = ctrl_inl(clk->enable_reg);
703 /* use external clock */
704 status &= ~0x000000ff;
705 status |= 0x00000080;
707 ctrl_outl(status, clk->enable_reg);
710 static struct clk_ops fsimck_clk_ops = {
714 static struct clk fsimckb_clk = {
715 .name = "fsimckb_clk",
717 .ops = &fsimck_clk_ops,
718 .enable_reg = (void __iomem *)FCLKBCR,
719 .rate = 0, /* unknown */
722 struct sh_fsi_platform_info fsi_info = {
723 .portb_flags = SH_FSI_BRS_INV |
724 SH_FSI_OUT_SLAVE_MODE |
725 SH_FSI_IN_SLAVE_MODE |
730 static struct resource fsi_resources[] = {
735 .flags = IORESOURCE_MEM,
739 .flags = IORESOURCE_IRQ,
743 static struct platform_device fsi_device = {
746 .num_resources = ARRAY_SIZE(fsi_resources),
747 .resource = fsi_resources,
749 .platform_data = &fsi_info,
752 .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
756 static struct platform_device *ecovec_devices[] __initdata = {
766 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
778 #define EEPROM_ADDR 0x50
779 static u8 mac_read(struct i2c_adapter *a, u8 command)
781 struct i2c_msg msg[2];
785 msg[0].addr = EEPROM_ADDR;
788 msg[0].buf = &command;
790 msg[1].addr = EEPROM_ADDR;
791 msg[1].flags = I2C_M_RD;
795 ret = i2c_transfer(a, msg, 2);
797 printk(KERN_ERR "error %d\n", ret);
804 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
806 struct i2c_adapter *a = i2c_get_adapter(1);
810 pr_err("can not get I2C 1\n");
814 /* read MAC address frome EEPROM */
815 for (i = 0; i < sizeof(pd->mac_addr); i++) {
816 pd->mac_addr[i] = mac_read(a, 0x10 + i);
821 #define PORT_HIZA 0xA4050158
822 #define IODRIVEA 0xA405018A
824 extern char ecovec24_sdram_enter_start;
825 extern char ecovec24_sdram_enter_end;
826 extern char ecovec24_sdram_leave_start;
827 extern char ecovec24_sdram_leave_end;
829 static int __init arch_setup(void)
833 /* register board specific self-refresh code */
834 sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
835 &ecovec24_sdram_enter_start,
836 &ecovec24_sdram_enter_end,
837 &ecovec24_sdram_leave_start,
838 &ecovec24_sdram_leave_end);
840 /* enable STATUS0, STATUS2 and PDSTATUS */
841 gpio_request(GPIO_FN_STATUS0, NULL);
842 gpio_request(GPIO_FN_STATUS2, NULL);
843 gpio_request(GPIO_FN_PDSTATUS, NULL);
846 gpio_request(GPIO_FN_SCIF0_TXD, NULL);
847 gpio_request(GPIO_FN_SCIF0_RXD, NULL);
849 /* enable debug LED */
850 gpio_request(GPIO_PTG0, NULL);
851 gpio_request(GPIO_PTG1, NULL);
852 gpio_request(GPIO_PTG2, NULL);
853 gpio_request(GPIO_PTG3, NULL);
854 gpio_direction_output(GPIO_PTG0, 0);
855 gpio_direction_output(GPIO_PTG1, 0);
856 gpio_direction_output(GPIO_PTG2, 0);
857 gpio_direction_output(GPIO_PTG3, 0);
858 ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
861 gpio_request(GPIO_PTA1, NULL);
862 gpio_direction_output(GPIO_PTA1, 1);
865 gpio_request(GPIO_FN_RMII_RXD0, NULL);
866 gpio_request(GPIO_FN_RMII_RXD1, NULL);
867 gpio_request(GPIO_FN_RMII_TXD0, NULL);
868 gpio_request(GPIO_FN_RMII_TXD1, NULL);
869 gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
870 gpio_request(GPIO_FN_RMII_TX_EN, NULL);
871 gpio_request(GPIO_FN_RMII_RX_ER, NULL);
872 gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
873 gpio_request(GPIO_FN_MDIO, NULL);
874 gpio_request(GPIO_FN_MDC, NULL);
875 gpio_request(GPIO_FN_LNKSTA, NULL);
878 ctrl_outw(0x0000, 0xA4D80000);
879 ctrl_outw(0x0000, 0xA4D90000);
880 gpio_request(GPIO_PTB3, NULL);
881 gpio_request(GPIO_PTB4, NULL);
882 gpio_request(GPIO_PTB5, NULL);
883 gpio_direction_input(GPIO_PTB3);
884 gpio_direction_output(GPIO_PTB4, 0);
885 gpio_direction_output(GPIO_PTB5, 0);
886 ctrl_outw(0x0600, 0xa40501d4);
887 ctrl_outw(0x0600, 0xa4050192);
889 if (gpio_get_value(GPIO_PTB3)) {
890 printk(KERN_INFO "USB1 function is selected\n");
891 usb1_common_device.name = "r8a66597_udc";
893 printk(KERN_INFO "USB1 host is selected\n");
894 usb1_common_device.name = "r8a66597_hcd";
898 gpio_request(GPIO_FN_LCDD23, NULL);
899 gpio_request(GPIO_FN_LCDD22, NULL);
900 gpio_request(GPIO_FN_LCDD21, NULL);
901 gpio_request(GPIO_FN_LCDD20, NULL);
902 gpio_request(GPIO_FN_LCDD19, NULL);
903 gpio_request(GPIO_FN_LCDD18, NULL);
904 gpio_request(GPIO_FN_LCDD17, NULL);
905 gpio_request(GPIO_FN_LCDD16, NULL);
906 gpio_request(GPIO_FN_LCDD15, NULL);
907 gpio_request(GPIO_FN_LCDD14, NULL);
908 gpio_request(GPIO_FN_LCDD13, NULL);
909 gpio_request(GPIO_FN_LCDD12, NULL);
910 gpio_request(GPIO_FN_LCDD11, NULL);
911 gpio_request(GPIO_FN_LCDD10, NULL);
912 gpio_request(GPIO_FN_LCDD9, NULL);
913 gpio_request(GPIO_FN_LCDD8, NULL);
914 gpio_request(GPIO_FN_LCDD7, NULL);
915 gpio_request(GPIO_FN_LCDD6, NULL);
916 gpio_request(GPIO_FN_LCDD5, NULL);
917 gpio_request(GPIO_FN_LCDD4, NULL);
918 gpio_request(GPIO_FN_LCDD3, NULL);
919 gpio_request(GPIO_FN_LCDD2, NULL);
920 gpio_request(GPIO_FN_LCDD1, NULL);
921 gpio_request(GPIO_FN_LCDD0, NULL);
922 gpio_request(GPIO_FN_LCDDISP, NULL);
923 gpio_request(GPIO_FN_LCDHSYN, NULL);
924 gpio_request(GPIO_FN_LCDDCK, NULL);
925 gpio_request(GPIO_FN_LCDVSYN, NULL);
926 gpio_request(GPIO_FN_LCDDON, NULL);
927 gpio_request(GPIO_FN_LCDLCLK, NULL);
928 ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
930 gpio_request(GPIO_PTE6, NULL);
931 gpio_request(GPIO_PTU1, NULL);
932 gpio_request(GPIO_PTR1, NULL);
933 gpio_request(GPIO_PTA2, NULL);
934 gpio_direction_input(GPIO_PTE6);
935 gpio_direction_output(GPIO_PTU1, 0);
936 gpio_direction_output(GPIO_PTR1, 0);
937 gpio_direction_output(GPIO_PTA2, 0);
939 /* I/O buffer drive ability is high */
940 ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
942 if (gpio_get_value(GPIO_PTE6)) {
944 lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
945 lcdc_info.ch[0].clock_divider = 1,
946 lcdc_info.ch[0].lcd_cfg.name = "DVI";
947 lcdc_info.ch[0].lcd_cfg.xres = 1280;
948 lcdc_info.ch[0].lcd_cfg.yres = 720;
949 lcdc_info.ch[0].lcd_cfg.left_margin = 220;
950 lcdc_info.ch[0].lcd_cfg.right_margin = 110;
951 lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
952 lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
953 lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
954 lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
956 gpio_set_value(GPIO_PTA2, 1);
957 gpio_set_value(GPIO_PTU1, 1);
961 lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
962 lcdc_info.ch[0].clock_divider = 2,
963 lcdc_info.ch[0].lcd_cfg.name = "Panel";
964 lcdc_info.ch[0].lcd_cfg.xres = 800;
965 lcdc_info.ch[0].lcd_cfg.yres = 480;
966 lcdc_info.ch[0].lcd_cfg.left_margin = 220;
967 lcdc_info.ch[0].lcd_cfg.right_margin = 110;
968 lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
969 lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
970 lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
971 lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
973 gpio_set_value(GPIO_PTR1, 1);
977 * LCDDON control is needed for Panel,
978 * but current sh_mobile_lcdc driver doesn't control it.
979 * It is temporary correspondence
981 gpio_request(GPIO_PTF4, NULL);
982 gpio_direction_output(GPIO_PTF4, 1);
984 /* enable TouchScreen */
985 i2c_register_board_info(0, &ts_i2c_clients, 1);
986 set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
990 gpio_request(GPIO_FN_VIO0_D15, NULL);
991 gpio_request(GPIO_FN_VIO0_D14, NULL);
992 gpio_request(GPIO_FN_VIO0_D13, NULL);
993 gpio_request(GPIO_FN_VIO0_D12, NULL);
994 gpio_request(GPIO_FN_VIO0_D11, NULL);
995 gpio_request(GPIO_FN_VIO0_D10, NULL);
996 gpio_request(GPIO_FN_VIO0_D9, NULL);
997 gpio_request(GPIO_FN_VIO0_D8, NULL);
998 gpio_request(GPIO_FN_VIO0_D7, NULL);
999 gpio_request(GPIO_FN_VIO0_D6, NULL);
1000 gpio_request(GPIO_FN_VIO0_D5, NULL);
1001 gpio_request(GPIO_FN_VIO0_D4, NULL);
1002 gpio_request(GPIO_FN_VIO0_D3, NULL);
1003 gpio_request(GPIO_FN_VIO0_D2, NULL);
1004 gpio_request(GPIO_FN_VIO0_D1, NULL);
1005 gpio_request(GPIO_FN_VIO0_D0, NULL);
1006 gpio_request(GPIO_FN_VIO0_VD, NULL);
1007 gpio_request(GPIO_FN_VIO0_CLK, NULL);
1008 gpio_request(GPIO_FN_VIO0_FLD, NULL);
1009 gpio_request(GPIO_FN_VIO0_HD, NULL);
1010 platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
1013 gpio_request(GPIO_FN_VIO1_D7, NULL);
1014 gpio_request(GPIO_FN_VIO1_D6, NULL);
1015 gpio_request(GPIO_FN_VIO1_D5, NULL);
1016 gpio_request(GPIO_FN_VIO1_D4, NULL);
1017 gpio_request(GPIO_FN_VIO1_D3, NULL);
1018 gpio_request(GPIO_FN_VIO1_D2, NULL);
1019 gpio_request(GPIO_FN_VIO1_D1, NULL);
1020 gpio_request(GPIO_FN_VIO1_D0, NULL);
1021 gpio_request(GPIO_FN_VIO1_FLD, NULL);
1022 gpio_request(GPIO_FN_VIO1_HD, NULL);
1023 gpio_request(GPIO_FN_VIO1_VD, NULL);
1024 gpio_request(GPIO_FN_VIO1_CLK, NULL);
1025 platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
1028 gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1029 gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1030 gpio_request(GPIO_FN_KEYOUT3, NULL);
1031 gpio_request(GPIO_FN_KEYOUT2, NULL);
1032 gpio_request(GPIO_FN_KEYOUT1, NULL);
1033 gpio_request(GPIO_FN_KEYOUT0, NULL);
1034 gpio_request(GPIO_FN_KEYIN0, NULL);
1036 /* enable user debug switch */
1037 gpio_request(GPIO_PTR0, NULL);
1038 gpio_request(GPIO_PTR4, NULL);
1039 gpio_request(GPIO_PTR5, NULL);
1040 gpio_request(GPIO_PTR6, NULL);
1041 gpio_direction_input(GPIO_PTR0);
1042 gpio_direction_input(GPIO_PTR4);
1043 gpio_direction_input(GPIO_PTR5);
1044 gpio_direction_input(GPIO_PTR6);
1046 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
1047 /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1048 gpio_request(GPIO_FN_SDHI0CD, NULL);
1049 gpio_request(GPIO_FN_SDHI0WP, NULL);
1050 gpio_request(GPIO_FN_SDHI0CMD, NULL);
1051 gpio_request(GPIO_FN_SDHI0CLK, NULL);
1052 gpio_request(GPIO_FN_SDHI0D3, NULL);
1053 gpio_request(GPIO_FN_SDHI0D2, NULL);
1054 gpio_request(GPIO_FN_SDHI0D1, NULL);
1055 gpio_request(GPIO_FN_SDHI0D0, NULL);
1056 gpio_request(GPIO_PTB6, NULL);
1057 gpio_direction_output(GPIO_PTB6, 0);
1059 /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1060 gpio_request(GPIO_FN_SDHI1CD, NULL);
1061 gpio_request(GPIO_FN_SDHI1WP, NULL);
1062 gpio_request(GPIO_FN_SDHI1CMD, NULL);
1063 gpio_request(GPIO_FN_SDHI1CLK, NULL);
1064 gpio_request(GPIO_FN_SDHI1D3, NULL);
1065 gpio_request(GPIO_FN_SDHI1D2, NULL);
1066 gpio_request(GPIO_FN_SDHI1D1, NULL);
1067 gpio_request(GPIO_FN_SDHI1D0, NULL);
1068 gpio_request(GPIO_PTB7, NULL);
1069 gpio_direction_output(GPIO_PTB7, 0);
1071 /* I/O buffer drive ability is high for SDHI1 */
1072 ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1074 /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1075 gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1076 gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1077 gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1078 gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1079 gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1080 gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1081 gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1082 gpio_request(GPIO_PTY6, NULL); /* write protect */
1083 gpio_direction_input(GPIO_PTY6);
1084 gpio_request(GPIO_PTY7, NULL); /* card detect */
1085 gpio_direction_input(GPIO_PTY7);
1087 spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1091 gpio_request(GPIO_PTU2, NULL);
1092 gpio_direction_output(GPIO_PTU2, 1);
1095 gpio_request(GPIO_PTA3, NULL);
1096 gpio_request(GPIO_PTA4, NULL);
1097 gpio_direction_output(GPIO_PTA3, 0);
1098 gpio_direction_output(GPIO_PTA4, 0);
1101 gpio_request(GPIO_FN_FSIMCKB, NULL);
1102 gpio_request(GPIO_FN_FSIIBSD, NULL);
1103 gpio_request(GPIO_FN_FSIOBSD, NULL);
1104 gpio_request(GPIO_FN_FSIIBBCK, NULL);
1105 gpio_request(GPIO_FN_FSIIBLRCK, NULL);
1106 gpio_request(GPIO_FN_FSIOBBCK, NULL);
1107 gpio_request(GPIO_FN_FSIOBLRCK, NULL);
1108 gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1110 /* change parent of FSI B */
1111 clk = clk_get(NULL, "fsib_clk");
1112 clk_register(&fsimckb_clk);
1113 clk_set_parent(clk, &fsimckb_clk);
1114 clk_set_rate(clk, 11000);
1115 clk_set_rate(&fsimckb_clk, 11000);
1118 gpio_request(GPIO_PTU0, NULL);
1119 gpio_direction_output(GPIO_PTU0, 0);
1122 /* enable motion sensor */
1123 gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1124 gpio_direction_input(GPIO_FN_INTC_IRQ1);
1126 /* enable I2C device */
1127 i2c_register_board_info(0, i2c0_devices,
1128 ARRAY_SIZE(i2c0_devices));
1130 i2c_register_board_info(1, i2c1_devices,
1131 ARRAY_SIZE(i2c1_devices));
1133 return platform_add_devices(ecovec_devices,
1134 ARRAY_SIZE(ecovec_devices));
1136 arch_initcall(arch_setup);
1138 static int __init devices_setup(void)
1140 sh_eth_init(&sh_eth_plat);
1143 device_initcall(devices_setup);
1145 static struct sh_machine_vector mv_ecovec __initmv = {
1146 .mv_name = "R0P7724 (EcoVec)",