#
-# platform-neutral GPIO infrastructure and expanders
+# GPIO infrastructure and drivers
#
config ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
- one or more of the GPIO expansion card drivers below.
+ one or more of the GPIO drivers below.
If unsure, say N.
Kernel drivers may also request that a particular GPIO be
exported to userspace; this can be useful when debugging.
-# put expanders in the right section, in alphabetical order
+config GPIO_GENERIC
+ tristate
+
+# put drivers in the right section, in alphabetical order
+
+config GPIO_DA9052
+ tristate "Dialog DA9052 GPIO"
+ depends on PMIC_DA9052
+ help
+ Say yes here to enable the GPIO driver for the DA9052 chip.
config GPIO_MAX730X
tristate
-comment "Memory mapped GPIO expanders:"
+comment "Memory mapped GPIO drivers:"
-config GPIO_BASIC_MMIO
- tristate "Basic memory-mapped GPIO controllers support"
+config GPIO_GENERIC_PLATFORM
+ tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+ select GPIO_GENERIC
help
- Say yes here to support basic memory-mapped GPIO controllers.
+ Say yes here to support basic platform_device memory-mapped GPIO controllers.
config GPIO_IT8761E
tristate "IT8761E GPIO support"
- depends on GPIOLIB
help
Say yes here to support GPIO functionality of IT8761E super I/O chip.
+config GPIO_EP93XX
+ def_bool y
+ depends on ARCH_EP93XX
+ select GPIO_GENERIC
+
+config GPIO_MPC5200
+ def_bool y
+ depends on PPC_MPC52xx
+
+config GPIO_MPC8XXX
+ bool "MPC512x/MPC8xxx GPIO support"
+ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+ FSL_SOC_BOOKE || PPC_86xx
+ help
+ Say Y here if you're going to use hardware that connects to the
+ MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
+config GPIO_MSM_V1
+ tristate "Qualcomm MSM GPIO v1"
+ depends on GPIOLIB && ARCH_MSM
+ help
+ Say yes here to support the GPIO interface on ARM v6 based
+ Qualcomm MSM chips. Most of the pins on the MSM can be
+ selected for GPIO, and are controlled by this driver.
+
+config GPIO_MSM_V2
+ tristate "Qualcomm MSM GPIO v2"
+ depends on GPIOLIB && ARCH_MSM
+ help
+ Say yes here to support the GPIO interface on ARM v7 based
+ Qualcomm MSM chips. Most of the pins on the MSM can be
+ selected for GPIO, and are controlled by this driver.
+
+config GPIO_MXC
+ def_bool y
+ depends on ARCH_MXC
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
+config GPIO_MXS
+ def_bool y
+ depends on ARCH_MXS
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
+
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
depends on ARM_AMBA
Say yes here to support the NEC VR4100 series General-purpose I/O Uint
config GPIO_SCH
- tristate "Intel SCH GPIO"
- depends on GPIOLIB && PCI
+ tristate "Intel SCH/TunnelCreek GPIO"
+ depends on PCI && X86
select MFD_CORE
select LPC_SCH
help
- Say yes here to support GPIO interface on Intel Poulsbo SCH.
+ Say yes here to support GPIO interface on Intel Poulsbo SCH
+ or Intel Tunnel Creek processor.
The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
powered by the core power rail and are turned off during sleep
modes (S3 and higher). The remaining four GPIOs are powered by
the Intel SCH suspend power supply. These GPIOs remain
active during S3. The suspend powered GPIOs can be used to wake the
system from the Suspend-to-RAM state.
+ The Intel Tunnel Creek processor has 5 GPIOs powered by the
+ core power rail and 9 from suspend power supply.
- This driver can also be built as a module. If so, the module
- will be called sch-gpio.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
+config GPIO_VX855
+ tristate "VIA VX855/VX875 GPIO"
+ depends on PCI
+ select MFD_CORE
+ select MFD_VX855
+ help
+ Support access to the VX855/VX875 GPIO lines through the gpio library.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
comment "I2C GPIO expanders:"
16 bits: pca9535, pca9539, pca9555, tca6416
- This driver can also be built as a module. If so, the module
- will be called pca953x.
-
config GPIO_PCA953X_IRQ
bool "Interrupt controller support for PCA953x"
depends on GPIO_PCA953X=y
This enables support for the GPIOs found on the STMPE I/O
Expanders.
-config GPIO_TC35892
- bool "TC35892 GPIOs"
- depends on MFD_TC35892
+config GPIO_TC3589X
+ bool "TC3589X GPIOs"
+ depends on MFD_TC3589X
help
- This enables support for the GPIOs found on the TC35892
+ This enables support for the GPIOs found on the TC3589X
I/O Expander.
+config GPIO_TPS65912
+ tristate "TI TPS65912 GPIO"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 gpio chip
+
config GPIO_TWL4030
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
depends on TWL4030_CORE
This option enables support for on-chip GPIO found
on Analog Devices ADP5520 PMICs.
- To compile this driver as a module, choose M here: the module will
- be called adp5520-gpio.
-
config GPIO_ADP5588
tristate "ADP5588 I2C GPIO expander"
depends on I2C
help
This option enables support for 18 GPIOs found
on Analog Devices ADP5588 GPIO Expanders.
- To compile this driver as a module, choose M here: the module will be
- called adp5588-gpio.
+
+config GPIO_ADP5588_IRQ
+ bool "Interrupt controller support for ADP5588"
+ depends on GPIO_ADP5588=y
+ help
+ Say yes here to enable the adp5588 to be used as an interrupt
+ controller. It requires the driver to be built in the kernel.
comment "PCI GPIO expanders:"
config GPIO_CS5535
tristate "AMD CS5535/CS5536 GPIO support"
- depends on PCI && !CS5535_GPIO
+ depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535
help
The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
can be used for quite a number of things. The CS5535/6 is found on
config GPIO_LANGWELL
bool "Intel Langwell/Penwell GPIO support"
- depends on PCI
+ depends on PCI && X86
help
Say Y here to support Intel Langwell/Penwell GPIO.
+config GPIO_PCH
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
+ depends on PCI && X86
+ select GENERIC_IRQ_CHIP
+ help
+ This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
+ which is an IOH(Input/Output Hub) for x86 embedded processor.
+ This driver can access PCH GPIO device.
+
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7223 and ML7831.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
+
+config GPIO_ML_IOH
+ tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
+ depends on PCI
+ select GENERIC_IRQ_CHIP
+ help
+ ML7213 is companion chip for Intel Atom E6xx series.
+ This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
+ Hub) which is for IVI(In-Vehicle Infotainment) use.
+ This driver can access the IOH's GPIO device.
+
config GPIO_TIMBERDALE
bool "Support for timberdale GPIO IP"
- depends on MFD_TIMBERDALE && GPIOLIB && HAS_IOMEM
+ depends on MFD_TIMBERDALE && HAS_IOMEM
---help---
Add support for the GPIO IP in the timberdale FPGA.
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
- depends on PCI && GPIOLIB
+ depends on PCI
select MFD_CORE
select MFD_RDC321X
help
GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
config GPIO_MCP23S08
- tristate "Microchip MCP23S08 I/O expander"
- depends on SPI_MASTER
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on SPI_MASTER || I2C
help
- SPI driver for Microchip MCP23S08 I/O expander. This provides
- a GPIO interface supporting inputs and outputs.
+ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+ I/O expanders.
+ This provides a GPIO interface supporting inputs and outputs.
config GPIO_MC33880
tristate "Freescale MC33880 high-side/low-side switch"
SPI driver for Freescale MC33880 high-side/low-side switch.
This provides GPIO interface supporting inputs and outputs.
+config GPIO_74X164
+ tristate "74x164 serial-in/parallel-out 8-bits shift register"
+ depends on SPI_MASTER
+ help
+ Platform driver for 74x164 compatible serial-in/parallel-out
+ 8-outputs shift registers. This driver can be used to provide access
+ to more gpio outputs.
+
comment "AC97 GPIO expanders:"
config GPIO_UCB1400
This enables support for the Philips UCB1400 GPIO pins.
The UCB1400 is an AC97 audio codec.
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_gpio.
-
comment "MODULbus GPIO expanders:"
config GPIO_JANZ_TTL
This driver provides support for driving the pins in output
mode only. Input mode is not supported.
+config GPIO_AB8500
+ bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
+ depends on AB8500_CORE && BROKEN
+ help
+ Select this to enable the AB8500 IC GPIO driver
+
+config GPIO_TPS65910
+ bool "TPS65910 GPIO"
+ depends on MFD_TPS65910
+ help
+ Select this option to enable GPIO driver for the TPS65910
+ chip family.
endif
projects / linux-flexiantxendom0.git / blobdiff