For broken nForce2 BIOS resulting in XT-PIC timer.
acpi_sleep= [HW,ACPI] Sleep options
- Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+ Format: { s3_bios, s3_mode, s3_beep, s3_leds, s4_nohwsig,
old_ordering, nonvs, sci_force_enable }
See Documentation/power/video.txt for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
+ s3_leds is for debugging; it flashes the keyboard LEDs
+ 3 times as soon as the kernel's real-mode entry point is
+ called.
s4_nohwsig prevents ACPI hardware signature from being
used during resume from hibernation.
old_ordering causes the ACPI 1.0 ordering of the _PTS
CPU-intensive style benchmark, and it can vary highly in
a microbenchmark depending on workload and compiler.
- 1: only for 32-bit processes
- 2: only for 64-bit processes
+ 32: only for 32-bit processes
+ 64: only for 64-bit processes
on: enable for both 32- and 64-bit processes
off: disable for both 32- and 64-bit processes
- amd_iommu= [HW,X86-84]
+ amd_iommu= [HW,X86-64]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
fullflush - enable flushing of IO/TLB entries when
/proc/<pid>/coredump_filter.
See also Documentation/filesystems/proc.txt.
+ cpufreq_driver= [X86] Allow only the named cpu frequency scaling driver
+ to register. Example: cpufreq_driver=powernow-k8
+ Format: { none | STRING }
+
cpuidle.off=1 [CPU_IDLE]
disable the cpuidle sub-system
The filter can be disabled or changed to another
driver later using sysfs.
+ drm_kms_helper.edid_firmware=[<connector>:]<file>
+ Broken monitors, graphic adapters and KVMs may
+ send no or incorrect EDID data sets. This parameter
+ allows to specify an EDID data set in the
+ /lib/firmware directory that is used instead.
+ Generic built-in EDID data sets are used, if one of
+ edid/1024x768.bin, edid/1280x1024.bin,
+ edid/1680x1050.bin, or edid/1920x1080.bin is given
+ and no file with the same name exists. Details and
+ instructions how to build your own EDID data are
+ available in Documentation/EDID/HOWTO.txt. An EDID
+ data set will only be used for a particular connector,
+ if its name and a colon are prepended to the EDID
+ name.
+
dscc4.setup= [NET]
earlycon= [KNL] Output early console device and options.
See Documentation/block/cfq-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA-64,PPC,SH,X86]
+ elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
Specifies physical address of start of kernel core
- image elf header. Generally kexec loader will
- pass this option to capture kernel.
+ image elf header and optionally the size. Generally
+ kexec loader will pass this option to capture kernel.
See Documentation/kdump/kdump.txt for details.
enable_mtrr_cleanup [X86]
ignore_loglevel [KNL]
Ignore loglevel setting - this will print /all/
kernel messages to the console. Useful for debugging.
+ We also add it as printk module parameter, so users
+ could change it dynamically, usually by
+ /sys/module/printk/parameters/ignore_loglevel.
ihash_entries= [KNL]
Set number of hash buckets for inode cache.
[KVM,Intel] Disable FlexPriority feature (TPR shadow).
Default is 1 (enabled)
+ kvm-intel.nested=
+ [KVM,Intel] Enable VMX nesting (nVMX).
+ Default is 0 (disabled)
+
kvm-intel.unrestricted_guest=
[KVM,Intel] Disable unrestricted guest feature
(virtualized real and unpaged mode) on capable
debugging driver suspend/resume hooks). This may
not work reliably with all consoles, but is known
to work with serial and VGA consoles.
+ To facilitate more flexible debugging, we also add
+ console_suspend, a printk module parameter to control
+ it. Users could use console_suspend (usually
+ /sys/module/printk/parameters/console_suspend) to
+ turn on/off it dynamically.
noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
caches in the slab allocator. Saves per-node memory,
default: off.
+ printk.always_kmsg_dump=
+ Trigger kmsg_dump for cases other than kernel oops or
+ panics
+ Format: <bool> (1/Y/y=enable, 0/N/n=disable)
+ default: disabled
+
printk.time= Show timing data prefixed to each printk message line
Format: <bool> (1/Y/y=enable, 0/N/n=disable)