Kernel drivers may also request that a particular GPIO be
exported to userspace; this can be useful when debugging.
+config GPIO_GENERIC
+ tristate
+
# put drivers in the right section, in alphabetical order
+config GPIO_DA9052
+ tristate "Dialog DA9052 GPIO"
+ depends on PMIC_DA9052
+ help
+ Say yes here to enable the GPIO driver for the DA9052 chip.
+
config GPIO_MAX730X
tristate
comment "Memory mapped GPIO drivers:"
-config GPIO_BASIC_MMIO_CORE
- tristate
- help
- Provides core functionality for basic memory-mapped GPIO controllers.
-
-config GPIO_BASIC_MMIO
- tristate "Basic memory-mapped GPIO controllers support"
- select GPIO_BASIC_MMIO_CORE
+config GPIO_GENERIC_PLATFORM
+ tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
+ select GPIO_GENERIC
help
- Say yes here to support basic memory-mapped GPIO controllers.
+ Say yes here to support basic platform_device memory-mapped GPIO controllers.
config GPIO_IT8761E
tristate "IT8761E GPIO support"
config GPIO_EP93XX
def_bool y
depends on ARCH_EP93XX
+ select GPIO_GENERIC
-config GPIO_EXYNOS4
+config GPIO_MPC5200
def_bool y
- depends on CPU_EXYNOS4210
+ depends on PPC_MPC52xx
-config GPIO_MXS
- def_bool y
- depends on ARCH_MXS
+config GPIO_MPC8XXX
+ bool "MPC512x/MPC8xxx GPIO support"
+ depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+ FSL_SOC_BOOKE || PPC_86xx
+ help
+ Say Y here if you're going to use hardware that connects to the
+ MPC512x/831x/834x/837x/8572/8610 GPIOs.
-config GPIO_MXC
- def_bool y
- depends on ARCH_MXC
- select GPIO_BASIC_MMIO_CORE
+config GPIO_MSM_V1
+ tristate "Qualcomm MSM GPIO v1"
+ depends on GPIOLIB && ARCH_MSM
+ help
+ Say yes here to support the GPIO interface on ARM v6 based
+ Qualcomm MSM chips. Most of the pins on the MSM can be
+ selected for GPIO, and are controlled by this driver.
-config GPIO_PLAT_SAMSUNG
- def_bool y
- depends on SAMSUNG_GPIOLIB_4BIT
+config GPIO_MSM_V2
+ tristate "Qualcomm MSM GPIO v2"
+ depends on GPIOLIB && ARCH_MSM
+ help
+ Say yes here to support the GPIO interface on ARM v7 based
+ Qualcomm MSM chips. Most of the pins on the MSM can be
+ selected for GPIO, and are controlled by this driver.
-config GPIO_S5PC100
+config GPIO_MXC
def_bool y
- depends on CPU_S5PC100
+ depends on ARCH_MXC
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
-config GPIO_S5PV210
+config GPIO_MXS
def_bool y
- depends on CPU_S5PV210
+ depends on ARCH_MXS
+ select GPIO_GENERIC
+ select GENERIC_IRQ_CHIP
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
- This driver can also be built as a module. If so, the module
- will be called sch-gpio.
+config GPIO_U300
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on MFD_SUPPORT && PCI
+ depends on PCI
select MFD_CORE
select MFD_VX855
help
16 bits: pca9535, pca9539, pca9555, tca6416
- This driver can also be built as a module. If so, the module
- will be called pca953x.
-
config GPIO_PCA953X_IRQ
bool "Interrupt controller support for PCA953x"
depends on GPIO_PCA953X=y
This enables support for the GPIOs found on the TC3589X
I/O Expander.
+config GPIO_TPS65912
+ tristate "TI TPS65912 GPIO"
+ depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+ help
+ This driver supports TPS65912 gpio chip
+
config GPIO_TWL4030
tristate "TWL4030, TWL5030, and TPS659x0 GPIOs"
depends on TWL4030_CORE
This option enables support for on-chip GPIO found
on Analog Devices ADP5520 PMICs.
- To compile this driver as a module, choose M here: the module will
- be called adp5520-gpio.
-
config GPIO_ADP5588
tristate "ADP5588 I2C GPIO expander"
depends on I2C
help
This option enables support for 18 GPIOs found
on Analog Devices ADP5588 GPIO Expanders.
- To compile this driver as a module, choose M here: the module will be
- called adp5588-gpio.
config GPIO_ADP5588_IRQ
bool "Interrupt controller support for ADP5588"
Say Y here to support Intel Langwell/Penwell GPIO.
config GPIO_PCH
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
+ tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
depends on PCI && X86
+ select GENERIC_IRQ_CHIP
help
This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
which is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH GPIO device.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7223.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7223 and ML7831.
ML7223 IOH is for MP(Media Phone) use.
- ML7223 is companion chip for Intel Atom E6xx series.
- ML7223 is completely compatible for Intel EG20T PCH.
+ ML7831 IOH is for general purpose use.
+ ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config GPIO_ML_IOH
tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
depends on PCI
+ select GENERIC_IRQ_CHIP
help
ML7213 is companion chip for Intel Atom E6xx series.
This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
depends on PCI
- select MFD_SUPPORT
select MFD_CORE
select MFD_RDC321X
help
GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
config GPIO_MCP23S08
- tristate "Microchip MCP23Sxx I/O expander"
- depends on SPI_MASTER
+ tristate "Microchip MCP23xxx I/O expander"
+ depends on SPI_MASTER || I2C
help
- SPI driver for Microchip MCP23S08/MPC23S17 I/O expanders.
+ SPI/I2C driver for Microchip MCP23S08/MCP23S17/MCP23008/MCP23017
+ I/O expanders.
This provides a GPIO interface supporting inputs and outputs.
config GPIO_MC33880
This enables support for the Philips UCB1400 GPIO pins.
The UCB1400 is an AC97 audio codec.
- To compile this driver as a module, choose M here: the
- module will be called ucb1400_gpio.
-
comment "MODULbus GPIO expanders:"
config GPIO_JANZ_TTL
This driver provides support for driving the pins in output
mode only. Input mode is not supported.
-config AB8500_GPIO
+config GPIO_AB8500
bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions"
depends on AB8500_CORE && BROKEN
help
projects / linux-flexiantxendom0.git / blobdiff