/*
- * Disk Array driver for Compaq SA53xx Controllers, SCSI Tape module
- * Copyright 2001 Compaq Computer Corporation
+ * Disk Array driver for HP Smart Array controllers, SCSI Tape module.
+ * (C) Copyright 2001, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 300, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
through the array controller. Note in particular, neither
physical nor logical disks are presented through the scsi layer. */
-#include <scsi/scsi.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/atomic.h>
+
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-#include <asm/atomic.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
#include "cciss_scsi.h"
-/* some prototypes... */
-static int sendcmd(
- __u8 cmd,
- int ctlr,
- void *buff,
- size_t size,
- unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: address is in scsi3addr */
- unsigned int log_unit,
- __u8 page_code,
- unsigned char *scsi3addr,
+#define CCISS_ABORT_MSG 0x00
+#define CCISS_RESET_MSG 0x01
+
+static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
+ size_t size,
+ __u8 page_code, unsigned char *scsi3addr,
int cmd_type);
+static CommandList_struct *cmd_alloc(ctlr_info_t *h);
+static CommandList_struct *cmd_special_alloc(ctlr_info_t *h);
+static void cmd_free(ctlr_info_t *h, CommandList_struct *c);
+static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c);
static int cciss_scsi_proc_info(
struct Scsi_Host *sh,
int length, /* length of data in buffer */
int func); /* 0 == read, 1 == write */
-static int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
- void (* done)(struct scsi_cmnd *));
+static int cciss_scsi_queue_command (struct Scsi_Host *h,
+ struct scsi_cmnd *cmd);
+static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
+static int cciss_eh_abort_handler(struct scsi_cmnd *);
static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
{ .name = "cciss0", .ndevices = 0 },
.proc_name = "cciss",
.proc_info = cciss_scsi_proc_info,
.queuecommand = cciss_scsi_queue_command,
- .can_queue = SCSI_CCISS_CAN_QUEUE,
.this_id = 7,
- .sg_tablesize = MAXSGENTRIES,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
+ /* Can't have eh_bus_reset_handler or eh_host_reset_handler for cciss */
+ .eh_device_reset_handler= cciss_eh_device_reset_handler,
+ .eh_abort_handler = cciss_eh_abort_handler,
};
#pragma pack(1)
+
+#define SCSI_PAD_32 8
+#define SCSI_PAD_64 8
+
struct cciss_scsi_cmd_stack_elem_t {
CommandList_struct cmd;
ErrorInfo_struct Err;
__u32 busaddr;
- __u32 pad;
+ int cmdindex;
+ u8 pad[IS_32_BIT * SCSI_PAD_32 + IS_64_BIT * SCSI_PAD_64];
};
#pragma pack()
-#define CMD_STACK_SIZE (SCSI_CCISS_CAN_QUEUE * \
- CCISS_MAX_SCSI_DEVS_PER_HBA + 2)
- // plus two for init time usage
-
#pragma pack(1)
struct cciss_scsi_cmd_stack_t {
struct cciss_scsi_cmd_stack_elem_t *pool;
- struct cciss_scsi_cmd_stack_elem_t *elem[CMD_STACK_SIZE];
+ struct cciss_scsi_cmd_stack_elem_t **elem;
dma_addr_t cmd_pool_handle;
int top;
+ int nelems;
};
#pragma pack()
struct cciss_scsi_adapter_data_t {
struct Scsi_Host *scsi_host;
struct cciss_scsi_cmd_stack_t cmd_stack;
+ SGDescriptor_struct **cmd_sg_list;
int registered;
spinlock_t lock; // to protect ccissscsi[ctlr];
};
-#define CPQ_TAPE_LOCK(ctlr, flags) spin_lock_irqsave( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
-#define CPQ_TAPE_UNLOCK(ctlr, flags) spin_unlock_irqrestore( \
- &(((struct cciss_scsi_adapter_data_t *) \
- hba[ctlr]->scsi_ctlr)->lock), flags);
+#define CPQ_TAPE_LOCK(h, flags) spin_lock_irqsave( \
+ &h->scsi_ctlr->lock, flags);
+#define CPQ_TAPE_UNLOCK(h, flags) spin_unlock_irqrestore( \
+ &h->scsi_ctlr->lock, flags);
static CommandList_struct *
scsi_cmd_alloc(ctlr_info_t *h)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* might be better to rewrite how we allocate scsi commands in a way that */
/* needs no locking at all. */
struct cciss_scsi_cmd_stack_t *stk;
u64bit temp64;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
if (stk->top < 0)
memset(&c->Err, 0, sizeof(c->Err));
/* set physical addr of cmd and addr of scsi parameters */
c->cmd.busaddr = c->busaddr;
+ c->cmd.cmdindex = c->cmdindex;
/* (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t)*stk->top)); */
}
static void
-scsi_cmd_free(ctlr_info_t *h, CommandList_struct *cmd)
+scsi_cmd_free(ctlr_info_t *h, CommandList_struct *c)
{
/* assume only one process in here at a time, locking done by caller. */
- /* use CCISS_LOCK(ctlr) */
+ /* use h->lock */
/* drop the free memory chunk on top of the stack. */
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
- sa = (struct cciss_scsi_adapter_data_t *) h->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
- if (stk->top >= CMD_STACK_SIZE) {
- printk("cciss: scsi_cmd_free called too many times.\n");
+ stk->top++;
+ if (stk->top >= stk->nelems) {
+ dev_err(&h->pdev->dev,
+ "scsi_cmd_free called too many times.\n");
BUG();
}
- stk->top++;
- stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) cmd;
+ stk->elem[stk->top] = (struct cciss_scsi_cmd_stack_elem_t *) c;
}
static int
-scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa)
+scsi_cmd_stack_setup(ctlr_info_t *h, struct cciss_scsi_adapter_data_t *sa)
{
int i;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- stk = &sa->cmd_stack;
- size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
+ stk = &sa->cmd_stack;
+ stk->nelems = cciss_tape_cmds + 2;
+ sa->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
+ h->chainsize, stk->nelems);
+ if (!sa->cmd_sg_list && h->chainsize > 0)
+ return -ENOMEM;
- // pci_alloc_consistent guarantees 32-bit DMA address will
- // be used
+ size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
+ /* Check alignment, see cciss_cmd.h near CommandList_struct def. */
+ BUILD_BUG_ON((sizeof(*stk->pool) % COMMANDLIST_ALIGNMENT) != 0);
+ /* pci_alloc_consistent guarantees 32-bit DMA address will be used */
stk->pool = (struct cciss_scsi_cmd_stack_elem_t *)
- pci_alloc_consistent(hba[ctlr]->pdev, size, &stk->cmd_pool_handle);
+ pci_alloc_consistent(h->pdev, size, &stk->cmd_pool_handle);
if (stk->pool == NULL) {
- printk("stk->pool is null\n");
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
+ sa->cmd_sg_list = NULL;
+ return -ENOMEM;
+ }
+ stk->elem = kmalloc(sizeof(stk->elem[0]) * stk->nelems, GFP_KERNEL);
+ if (!stk->elem) {
+ pci_free_consistent(h->pdev, size, stk->pool,
+ stk->cmd_pool_handle);
return -1;
}
-
- for (i=0; i<CMD_STACK_SIZE; i++) {
+ for (i = 0; i < stk->nelems; i++) {
stk->elem[i] = &stk->pool[i];
stk->elem[i]->busaddr = (__u32) (stk->cmd_pool_handle +
(sizeof(struct cciss_scsi_cmd_stack_elem_t) * i));
+ stk->elem[i]->cmdindex = i;
}
- stk->top = CMD_STACK_SIZE-1;
+ stk->top = stk->nelems-1;
return 0;
}
static void
-scsi_cmd_stack_free(int ctlr)
+scsi_cmd_stack_free(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
size_t size;
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
- if (stk->top != CMD_STACK_SIZE-1) {
- printk( "cciss: %d scsi commands are still outstanding.\n",
- CMD_STACK_SIZE - stk->top);
- // BUG();
- printk("WE HAVE A BUG HERE!!! stk=0x%p\n", stk);
+ if (stk->top != stk->nelems-1) {
+ dev_warn(&h->pdev->dev,
+ "bug: %d scsi commands are still outstanding.\n",
+ stk->nelems - stk->top);
}
- size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE;
+ size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * stk->nelems;
- pci_free_consistent(hba[ctlr]->pdev, size, stk->pool, stk->cmd_pool_handle);
+ pci_free_consistent(h->pdev, size, stk->pool, stk->cmd_pool_handle);
stk->pool = NULL;
+ cciss_free_sg_chain_blocks(sa->cmd_sg_list, stk->nelems);
+ kfree(stk->elem);
+ stk->elem = NULL;
}
-/* scsi_device_types comes from scsi.h */
-#define DEVICETYPE(n) (n<0 || n>MAX_SCSI_DEVICE_CODE) ? \
- "Unknown" : scsi_device_types[n]
-
#if 0
static int xmargin=8;
static int amargin=60;
#endif
static int
-find_bus_target_lun(int ctlr, int *bus, int *target, int *lun)
+find_bus_target_lun(ctlr_info_t *h, int *bus, int *target, int *lun)
{
/* finds an unused bus, target, lun for a new device */
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->scsi_ctlr->lock is held */
int i, found=0;
unsigned char target_taken[CCISS_MAX_SCSI_DEVS_PER_HBA];
memset(&target_taken[0], 0, CCISS_MAX_SCSI_DEVS_PER_HBA);
target_taken[SELF_SCSI_ID] = 1;
- for (i=0;i<ccissscsi[ctlr].ndevices;i++)
- target_taken[ccissscsi[ctlr].dev[i].target] = 1;
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++)
+ target_taken[ccissscsi[h->ctlr].dev[i].target] = 1;
- for (i=0;i<CCISS_MAX_SCSI_DEVS_PER_HBA;i++) {
+ for (i = 0; i < CCISS_MAX_SCSI_DEVS_PER_HBA; i++) {
if (!target_taken[i]) {
*bus = 0; *target=i; *lun = 0; found=1;
break;
}
return (!found);
}
+struct scsi2map {
+ char scsi3addr[8];
+ int bus, target, lun;
+};
static int
-cciss_scsi_add_entry(int ctlr, int hostno,
- unsigned char *scsi3addr, int devtype)
+cciss_scsi_add_entry(ctlr_info_t *h, int hostno,
+ struct cciss_scsi_dev_t *device,
+ struct scsi2map *added, int *nadded)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
- int n = ccissscsi[ctlr].ndevices;
+ /* assumes h->scsi_ctlr->lock is held */
+ int n = ccissscsi[h->ctlr].ndevices;
struct cciss_scsi_dev_t *sd;
+ int i, bus, target, lun;
+ unsigned char addr1[8], addr2[8];
if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
- printk("cciss%d: Too many devices, "
- "some will be inaccessible.\n", ctlr);
+ dev_warn(&h->pdev->dev, "Too many devices, "
+ "some will be inaccessible.\n");
return -1;
}
- sd = &ccissscsi[ctlr].dev[n];
- if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0)
- return -1;
- memcpy(&sd->scsi3addr[0], scsi3addr, 8);
- sd->devtype = devtype;
- ccissscsi[ctlr].ndevices++;
+
+ bus = target = -1;
+ lun = 0;
+ /* Is this device a non-zero lun of a multi-lun device */
+ /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */
+ if (device->scsi3addr[4] != 0) {
+ /* Search through our list and find the device which */
+ /* has the same 8 byte LUN address, excepting byte 4. */
+ /* Assign the same bus and target for this new LUN. */
+ /* Use the logical unit number from the firmware. */
+ memcpy(addr1, device->scsi3addr, 8);
+ addr1[4] = 0;
+ for (i = 0; i < n; i++) {
+ sd = &ccissscsi[h->ctlr].dev[i];
+ memcpy(addr2, sd->scsi3addr, 8);
+ addr2[4] = 0;
+ /* differ only in byte 4? */
+ if (memcmp(addr1, addr2, 8) == 0) {
+ bus = sd->bus;
+ target = sd->target;
+ lun = device->scsi3addr[4];
+ break;
+ }
+ }
+ }
+
+ sd = &ccissscsi[h->ctlr].dev[n];
+ if (lun == 0) {
+ if (find_bus_target_lun(h,
+ &sd->bus, &sd->target, &sd->lun) != 0)
+ return -1;
+ } else {
+ sd->bus = bus;
+ sd->target = target;
+ sd->lun = lun;
+ }
+ added[*nadded].bus = sd->bus;
+ added[*nadded].target = sd->target;
+ added[*nadded].lun = sd->lun;
+ (*nadded)++;
+
+ memcpy(sd->scsi3addr, device->scsi3addr, 8);
+ memcpy(sd->vendor, device->vendor, sizeof(sd->vendor));
+ memcpy(sd->revision, device->revision, sizeof(sd->revision));
+ memcpy(sd->device_id, device->device_id, sizeof(sd->device_id));
+ sd->devtype = device->devtype;
+
+ ccissscsi[h->ctlr].ndevices++;
/* initially, (before registering with scsi layer) we don't
know our hostno and we don't want to print anything first
time anyway (the scsi layer's inquiries will show that info) */
if (hostno != -1)
- printk("cciss%d: %s device c%db%dt%dl%d added.\n",
- ctlr, DEVICETYPE(sd->devtype), hostno,
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n",
+ scsi_device_type(sd->devtype), hostno,
sd->bus, sd->target, sd->lun);
return 0;
}
static void
-cciss_scsi_remove_entry(int ctlr, int hostno, int entry)
+cciss_scsi_remove_entry(ctlr_info_t *h, int hostno, int entry,
+ struct scsi2map *removed, int *nremoved)
{
- /* assumes hba[ctlr]->scsi_ctlr->lock is held */
+ /* assumes h->ctlr]->scsi_ctlr->lock is held */
int i;
struct cciss_scsi_dev_t sd;
if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return;
- sd = ccissscsi[ctlr].dev[entry];
- for (i=entry;i<ccissscsi[ctlr].ndevices-1;i++)
- ccissscsi[ctlr].dev[i] = ccissscsi[ctlr].dev[i+1];
- ccissscsi[ctlr].ndevices--;
- printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(sd.devtype), hostno,
+ sd = ccissscsi[h->ctlr].dev[entry];
+ removed[*nremoved].bus = sd.bus;
+ removed[*nremoved].target = sd.target;
+ removed[*nremoved].lun = sd.lun;
+ (*nremoved)++;
+ for (i = entry; i < ccissscsi[h->ctlr].ndevices-1; i++)
+ ccissscsi[h->ctlr].dev[i] = ccissscsi[h->ctlr].dev[i+1];
+ ccissscsi[h->ctlr].ndevices--;
+ dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n",
+ scsi_device_type(sd.devtype), hostno,
sd.bus, sd.target, sd.lun);
}
(a)[1] == (b)[1] && \
(a)[0] == (b)[0])
+static void fixup_botched_add(ctlr_info_t *h, char *scsi3addr)
+{
+ /* called when scsi_add_device fails in order to re-adjust */
+ /* ccissscsi[] to match the mid layer's view. */
+ unsigned long flags;
+ int i, j;
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ if (memcmp(scsi3addr,
+ ccissscsi[h->ctlr].dev[i].scsi3addr, 8) == 0) {
+ for (j = i; j < ccissscsi[h->ctlr].ndevices-1; j++)
+ ccissscsi[h->ctlr].dev[j] =
+ ccissscsi[h->ctlr].dev[j+1];
+ ccissscsi[h->ctlr].ndevices--;
+ break;
+ }
+ }
+ CPQ_TAPE_UNLOCK(h, flags);
+}
+
+static int device_is_the_same(struct cciss_scsi_dev_t *dev1,
+ struct cciss_scsi_dev_t *dev2)
+{
+ return dev1->devtype == dev2->devtype &&
+ memcmp(dev1->scsi3addr, dev2->scsi3addr,
+ sizeof(dev1->scsi3addr)) == 0 &&
+ memcmp(dev1->device_id, dev2->device_id,
+ sizeof(dev1->device_id)) == 0 &&
+ memcmp(dev1->vendor, dev2->vendor,
+ sizeof(dev1->vendor)) == 0 &&
+ memcmp(dev1->model, dev2->model,
+ sizeof(dev1->model)) == 0 &&
+ memcmp(dev1->revision, dev2->revision,
+ sizeof(dev1->revision)) == 0;
+}
+
static int
-adjust_cciss_scsi_table(int ctlr, int hostno,
+adjust_cciss_scsi_table(ctlr_info_t *h, int hostno,
struct cciss_scsi_dev_t sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, but
int i,j, found, changes=0;
struct cciss_scsi_dev_t *csd;
unsigned long flags;
+ struct scsi2map *added, *removed;
+ int nadded, nremoved;
+ struct Scsi_Host *sh = NULL;
+
+ added = kzalloc(sizeof(*added) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+ removed = kzalloc(sizeof(*removed) * CCISS_MAX_SCSI_DEVS_PER_HBA,
+ GFP_KERNEL);
+
+ if (!added || !removed) {
+ dev_warn(&h->pdev->dev,
+ "Out of memory in adjust_cciss_scsi_table\n");
+ goto free_and_out;
+ }
- CPQ_TAPE_LOCK(ctlr, flags);
+ CPQ_TAPE_LOCK(h, flags);
+
+ if (hostno != -1) /* if it's not the first time... */
+ sh = h->scsi_ctlr->scsi_host;
/* find any devices in ccissscsi[] that are not in
sd[] and remove them from ccissscsi[] */
i = 0;
- while(i<ccissscsi[ctlr].ndevices) {
- csd = &ccissscsi[ctlr].dev[i];
+ nremoved = 0;
+ nadded = 0;
+ while (i < ccissscsi[h->ctlr].ndevices) {
+ csd = &ccissscsi[h->ctlr].dev[i];
found=0;
for (j=0;j<nsds;j++) {
if (SCSI3ADDR_EQ(sd[j].scsi3addr,
csd->scsi3addr)) {
- if (sd[j].devtype == csd->devtype)
+ if (device_is_the_same(&sd[j], csd))
found=2;
else
found=1;
if (found == 0) { /* device no longer present. */
changes++;
- /* printk("cciss%d: %s device c%db%dt%dl%d removed.\n",
- ctlr, DEVICETYPE(csd->devtype), hostno,
- csd->bus, csd->target, csd->lun); */
- cciss_scsi_remove_entry(ctlr, hostno, i);
- /* note, i not incremented */
- }
- else if (found == 1) { /* device is different kind */
+ cciss_scsi_remove_entry(h, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
+ } else if (found == 1) { /* device is different in some way */
changes++;
- printk("cciss%d: device c%db%dt%dl%d type changed "
- "(device type now %s).\n",
- ctlr, hostno, csd->bus, csd->target, csd->lun,
- DEVICETYPE(csd->devtype));
+ dev_info(&h->pdev->dev,
+ "device c%db%dt%dl%d has changed.\n",
+ hostno, csd->bus, csd->target, csd->lun);
+ cciss_scsi_remove_entry(h, hostno, i,
+ removed, &nremoved);
+ /* remove ^^^, hence i not incremented */
+ if (cciss_scsi_add_entry(h, hostno, &sd[j],
+ added, &nadded) != 0)
+ /* we just removed one, so add can't fail. */
+ BUG();
csd->devtype = sd[j].devtype;
- i++; /* so just move along. */
+ memcpy(csd->device_id, sd[j].device_id,
+ sizeof(csd->device_id));
+ memcpy(csd->vendor, sd[j].vendor,
+ sizeof(csd->vendor));
+ memcpy(csd->model, sd[j].model,
+ sizeof(csd->model));
+ memcpy(csd->revision, sd[j].revision,
+ sizeof(csd->revision));
} else /* device is same as it ever was, */
i++; /* so just move along. */
}
for (i=0;i<nsds;i++) {
found=0;
- for (j=0;j<ccissscsi[ctlr].ndevices;j++) {
- csd = &ccissscsi[ctlr].dev[j];
+ for (j = 0; j < ccissscsi[h->ctlr].ndevices; j++) {
+ csd = &ccissscsi[h->ctlr].dev[j];
if (SCSI3ADDR_EQ(sd[i].scsi3addr,
csd->scsi3addr)) {
- if (sd[i].devtype == csd->devtype)
+ if (device_is_the_same(&sd[i], csd))
found=2; /* found device */
else
found=1; /* found a bug. */
}
if (!found) {
changes++;
- if (cciss_scsi_add_entry(ctlr, hostno,
- &sd[i].scsi3addr[0], sd[i].devtype) != 0)
+ if (cciss_scsi_add_entry(h, hostno, &sd[i],
+ added, &nadded) != 0)
break;
} else if (found == 1) {
/* should never happen... */
changes++;
- printk("cciss%d: device unexpectedly changed type\n",
- ctlr);
+ dev_warn(&h->pdev->dev,
+ "device unexpectedly changed\n");
/* but if it does happen, we just ignore that device */
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
+
+ /* Don't notify scsi mid layer of any changes the first time through */
+ /* (or if there are no changes) scsi_scan_host will do it later the */
+ /* first time through. */
+ if (hostno == -1 || !changes)
+ goto free_and_out;
+
+ /* Notify scsi mid layer of any removed devices */
+ for (i = 0; i < nremoved; i++) {
+ struct scsi_device *sdev =
+ scsi_device_lookup(sh, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ if (sdev != NULL) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /* We don't expect to get here. */
+ /* future cmds to this device will get selection */
+ /* timeout as if the device was gone. */
+ dev_warn(&h->pdev->dev, "didn't find "
+ "c%db%dt%dl%d\n for removal.",
+ hostno, removed[i].bus,
+ removed[i].target, removed[i].lun);
+ }
+ }
- if (!changes)
- printk("cciss%d: No device changes detected.\n", ctlr);
+ /* Notify scsi mid layer of any added devices */
+ for (i = 0; i < nadded; i++) {
+ int rc;
+ rc = scsi_add_device(sh, added[i].bus,
+ added[i].target, added[i].lun);
+ if (rc == 0)
+ continue;
+ dev_warn(&h->pdev->dev, "scsi_add_device "
+ "c%db%dt%dl%d failed, device not added.\n",
+ hostno, added[i].bus, added[i].target, added[i].lun);
+ /* now we have to remove it from ccissscsi, */
+ /* since it didn't get added to scsi mid layer */
+ fixup_botched_add(h, added[i].scsi3addr);
+ }
+free_and_out:
+ kfree(added);
+ kfree(removed);
return 0;
}
static int
-lookup_scsi3addr(int ctlr, int bus, int target, int lun, char *scsi3addr)
+lookup_scsi3addr(ctlr_info_t *h, int bus, int target, int lun, char *scsi3addr)
{
int i;
struct cciss_scsi_dev_t *sd;
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
- for (i=0;i<ccissscsi[ctlr].ndevices;i++) {
- sd = &ccissscsi[ctlr].dev[i];
+ CPQ_TAPE_LOCK(h, flags);
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ sd = &ccissscsi[h->ctlr].dev[i];
if (sd->bus == bus &&
sd->target == target &&
sd->lun == lun) {
memcpy(scsi3addr, &sd->scsi3addr[0], 8);
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return 0;
}
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
+ CPQ_TAPE_UNLOCK(h, flags);
return -1;
}
static void
-cciss_scsi_setup(int cntl_num)
+cciss_scsi_setup(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t * shba;
- ccissscsi[cntl_num].ndevices = 0;
+ ccissscsi[h->ctlr].ndevices = 0;
shba = (struct cciss_scsi_adapter_data_t *)
kmalloc(sizeof(*shba), GFP_KERNEL);
if (shba == NULL)
shba->scsi_host = NULL;
spin_lock_init(&shba->lock);
shba->registered = 0;
- if (scsi_cmd_stack_setup(cntl_num, shba) != 0) {
+ if (scsi_cmd_stack_setup(h, shba) != 0) {
kfree(shba);
shba = NULL;
}
- hba[cntl_num]->scsi_ctlr = (void *) shba;
+ h->scsi_ctlr = shba;
return;
}
-static void
-complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
+static void complete_scsi_command(CommandList_struct *c, int timeout,
+ __u32 tag)
{
struct scsi_cmnd *cmd;
- ctlr_info_t *ctlr;
- u64bit addr64;
+ ctlr_info_t *h;
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
/* First, see if it was a message rather than a command */
- if (cp->Request.Type.Type == TYPE_MSG) {
- cp->cmd_type = CMD_MSG_DONE;
+ if (c->Request.Type.Type == TYPE_MSG) {
+ c->cmd_type = CMD_MSG_DONE;
return;
}
- cmd = (struct scsi_cmnd *) cp->scsi_cmd;
- ctlr = hba[cp->ctlr];
-
- /* undo the DMA mappings */
+ cmd = (struct scsi_cmnd *) c->scsi_cmd;
+ h = hba[c->ctlr];
- if (cmd->use_sg) {
- pci_unmap_sg(ctlr->pdev,
- cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
- }
- else if (cmd->request_bufflen) {
- addr64.val32.lower = cp->SG[0].Addr.lower;
- addr64.val32.upper = cp->SG[0].Addr.upper;
- pci_unmap_single(ctlr->pdev, (dma_addr_t) addr64.val,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- }
+ scsi_dma_unmap(cmd);
+ if (c->Header.SGTotal > h->max_cmd_sgentries)
+ cciss_unmap_sg_chain_block(h, c);
cmd->result = (DID_OK << 16); /* host byte */
cmd->result |= (COMMAND_COMPLETE << 8); /* msg byte */
ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
SCSI_SENSE_BUFFERSIZE :
ei->SenseLen);
- cmd->resid = ei->ResidualCnt;
+ scsi_set_resid(cmd, ei->ResidualCnt);
if(ei->CommandStatus != 0)
{ /* an error has occurred */
{
#if 0
printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ "has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
#endif
- cmd->result |= (ei->ScsiStatus < 1);
+ cmd->result |= (ei->ScsiStatus << 1);
}
else { /* scsi status is zero??? How??? */
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
- /* print_bytes(cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ /* print_bytes(c, sizeof(*c), 1, 0);
+ print_cmd(c); */
/* We get CMD_INVALID if you address a non-existent tape drive instead
of a selection timeout (no response). You will see this if you yank
out a tape drive, then try to access it. This is kind of a shame
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p had connection lost\n", c);
break;
case CMD_ABORTED:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
cmd->result = DID_ABORT << 16;
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ dev_warn(&h->pdev->dev, "%p aborted due to an "
+ "unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
cmd->result = DID_TIME_OUT << 16;
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
+ break;
+ case CMD_UNABORTABLE:
+ cmd->result = DID_ERROR << 16;
+ dev_warn(&h->pdev->dev, "c %p command "
+ "unabortable\n", c);
break;
default:
cmd->result = DID_ERROR << 16;
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n", c,
ei->CommandStatus);
}
}
- // printk("c:%p:c%db%dt%dl%d ", cmd, ctlr->ctlr, cmd->channel,
- // cmd->target, cmd->lun);
cmd->scsi_done(cmd);
- scsi_cmd_free(ctlr, cp);
+ scsi_cmd_free(h, c);
}
static int
-cciss_scsi_detect(int ctlr)
+cciss_scsi_detect(ctlr_info_t *h)
{
struct Scsi_Host *sh;
int error;
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
sh->this_id = SELF_SCSI_ID;
+ sh->can_queue = cciss_tape_cmds;
+ sh->sg_tablesize = h->maxsgentries;
+ sh->max_cmd_len = MAX_COMMAND_SIZE;
+ sh->max_sectors = h->cciss_max_sectors;
((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->scsi_host = (void *) sh;
- sh->hostdata[0] = (unsigned long) hba[ctlr];
- sh->irq = hba[ctlr]->intr;
+ h->scsi_ctlr)->scsi_host = sh;
+ sh->hostdata[0] = (unsigned long) h;
+ sh->irq = h->intr[SIMPLE_MODE_INT];
sh->unique_id = sh->irq;
- error = scsi_add_host(sh, &hba[ctlr]->pdev->dev);
+ error = scsi_add_host(sh, &h->pdev->dev);
if (error)
goto fail_host_put;
scsi_scan_host(sh);
static void
cciss_unmap_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
size_t buflen,
int data_direction)
{
u64bit addr64;
- addr64.val32.lower = cp->SG[0].Addr.lower;
- addr64.val32.upper = cp->SG[0].Addr.upper;
+ addr64.val32.lower = c->SG[0].Addr.lower;
+ addr64.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(pdev, (dma_addr_t) addr64.val, buflen, data_direction);
}
static void
cciss_map_one(struct pci_dev *pdev,
- CommandList_struct *cp,
+ CommandList_struct *c,
unsigned char *buf,
size_t buflen,
int data_direction)
__u64 addr64;
addr64 = (__u64) pci_map_single(pdev, buf, buflen, data_direction);
- cp->SG[0].Addr.lower =
+ c->SG[0].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
+ c->SG[0].Addr.upper =
(__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = buflen;
- cp->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
+ c->SG[0].Len = buflen;
+ c->Header.SGList = (__u8) 1; /* no. SGs contig in this cmd */
+ c->Header.SGTotal = (__u16) 1; /* total sgs in this cmd list */
}
static int
-cciss_scsi_do_simple_cmd(ctlr_info_t *c,
- CommandList_struct *cp,
+cciss_scsi_do_simple_cmd(ctlr_info_t *h,
+ CommandList_struct *c,
unsigned char *scsi3addr,
unsigned char *cdb,
unsigned char cdblen,
unsigned char *buf, int bufsize,
int direction)
{
- unsigned long flags;
- DECLARE_COMPLETION(wait);
+ DECLARE_COMPLETION_ONSTACK(wait);
- cp->cmd_type = CMD_IOCTL_PEND; // treat this like an ioctl
- cp->scsi_cmd = NULL;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN, scsi3addr, sizeof(cp->Header.LUN));
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_IOCTL_PEND; /* treat this like an ioctl */
+ c->scsi_cmd = NULL;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN, scsi3addr, sizeof(c->Header.LUN));
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
/* printk("Using scsi3addr 0x%02x%0x2%0x2%0x2%0x2%0x2%0x2%0x2\n",
scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3],
scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); */
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- memcpy(cp->Request.CDB, cdb, cdblen);
- cp->Request.Timeout = 0;
- cp->Request.CDBLen = cdblen;
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
- cp->Request.Type.Direction = direction;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ memcpy(c->Request.CDB, cdb, cdblen);
+ c->Request.Timeout = 0;
+ c->Request.CDBLen = cdblen;
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = direction;
/* Fill in the SG list and do dma mapping */
- cciss_map_one(c->pdev, cp, (unsigned char *) buf,
+ cciss_map_one(h->pdev, c, (unsigned char *) buf,
bufsize, DMA_FROM_DEVICE);
- cp->waiting = &wait;
-
- /* Put the request on the tail of the request queue */
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- addQ(&c->reqQ, cp);
- c->Qdepth++;
- start_io(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
-
+ c->waiting = &wait;
+ enqueue_cmd_and_start_io(h, c);
wait_for_completion(&wait);
/* undo the dma mapping */
- cciss_unmap_one(c->pdev, cp, bufsize, DMA_FROM_DEVICE);
+ cciss_unmap_one(h->pdev, c, bufsize, DMA_FROM_DEVICE);
return(0);
}
static void
-cciss_scsi_interpret_error(CommandList_struct *cp)
+cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c)
{
ErrorInfo_struct *ei;
- ei = cp->err_info;
+ ei = c->err_info;
switch(ei->CommandStatus)
{
case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- "completed with errors\n", cp);
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- cp,
- ei->ScsiStatus);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has completed with errors\n", c);
+ dev_warn(&h->pdev->dev,
+ "cmd %p has SCSI Status = %x\n",
+ c, ei->ScsiStatus);
if (ei->ScsiStatus == 0)
- printk(KERN_WARNING
- "cciss:SCSI status is abnormally zero. "
+ dev_warn(&h->pdev->dev,
+ "SCSI status is abnormally zero. "
"(probably indicates selection timeout "
"reported incorrectly due to a known "
"firmware bug, circa July, 2001.)\n");
break;
case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
- printk("UNDERRUN\n");
+ dev_info(&h->pdev->dev, "UNDERRUN\n");
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cp %p has"
+ dev_warn(&h->pdev->dev, "%p has"
" completed with data overrun "
- "reported\n", cp);
+ "reported\n", c);
break;
case CMD_INVALID: {
/* controller unfortunately reports SCSI passthru's */
/* to non-existent targets as invalid commands. */
- printk(KERN_WARNING "cciss: cp %p is "
- "reported invalid (probably means "
- "target device no longer present)\n",
- cp);
- /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
- print_cmd(cp); */
+ dev_warn(&h->pdev->dev,
+ "%p is reported invalid (probably means "
+ "target device no longer present)\n", c);
+ /* print_bytes((unsigned char *) c, sizeof(*c), 1, 0);
+ print_cmd(c); */
}
break;
case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cp %p has "
- "protocol error \n", cp);
+ dev_warn(&h->pdev->dev, "%p has protocol error\n", c);
break;
case CMD_HARDWARE_ERR:
/* cmd->result = DID_ERROR << 16; */
- printk(KERN_WARNING "cciss: cp %p had "
- " hardware error\n", cp);
+ dev_warn(&h->pdev->dev, "%p had hardware error\n", c);
break;
case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cp %p had "
- "connection lost\n", cp);
+ dev_warn(&h->pdev->dev, "%p had connection lost\n", c);
break;
case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cp %p was "
- "aborted\n", cp);
+ dev_warn(&h->pdev->dev, "%p was aborted\n", c);
break;
case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cp %p reports "
- "abort failed\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p reports abort failed\n", c);
break;
case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss: cp %p aborted "
- "do to an unsolicited abort\n", cp);
+ dev_warn(&h->pdev->dev,
+ "%p aborted due to an unsolicited abort\n", c);
break;
case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cp %p timedout\n",
- cp);
+ dev_warn(&h->pdev->dev, "%p timedout\n", c);
+ break;
+ case CMD_UNABORTABLE:
+ dev_warn(&h->pdev->dev,
+ "%p unabortable\n", c);
break;
default:
- printk(KERN_WARNING "cciss: cp %p returned "
- "unknown status %x\n", cp,
- ei->CommandStatus);
+ dev_warn(&h->pdev->dev,
+ "%p returned unknown status %x\n",
+ c, ei->CommandStatus);
}
}
static int
-cciss_scsi_do_inquiry(ctlr_info_t *c, unsigned char *scsi3addr,
- unsigned char *buf, unsigned char bufsize)
+cciss_scsi_do_inquiry(ctlr_info_t *h, unsigned char *scsi3addr,
+ unsigned char page, unsigned char *buf,
+ unsigned char bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
char cdb[6];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
- if (cp == NULL) { /* trouble... */
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
- ei = cp->err_info;
+ ei = c->err_info;
cdb[0] = CISS_INQUIRY;
- cdb[1] = 0;
- cdb[2] = 0;
+ cdb[1] = (page != 0);
+ cdb[2] = page;
cdb[3] = 0;
cdb[4] = bufsize;
cdb[5] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr, cdb,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr, cdb,
6, buf, bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
+/* Get the device id from inquiry page 0x83 */
+static int cciss_scsi_get_device_id(ctlr_info_t *h, unsigned char *scsi3addr,
+ unsigned char *device_id, int buflen)
+{
+ int rc;
+ unsigned char *buf;
+
+ if (buflen > 16)
+ buflen = 16;
+ buf = kzalloc(64, GFP_KERNEL);
+ if (!buf)
+ return -1;
+ rc = cciss_scsi_do_inquiry(h, scsi3addr, 0x83, buf, 64);
+ if (rc == 0)
+ memcpy(device_id, &buf[8], buflen);
+ kfree(buf);
+ return rc != 0;
+}
+
static int
-cciss_scsi_do_report_phys_luns(ctlr_info_t *c,
+cciss_scsi_do_report_phys_luns(ctlr_info_t *h,
ReportLunData_struct *buf, int bufsize)
{
int rc;
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned char cdb[12];
unsigned char scsi3addr[8];
ErrorInfo_struct *ei;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- cp = scsi_cmd_alloc(c);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
- if (cp == NULL) { /* trouble... */
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
printk("cmd_alloc returned NULL!\n");
return -1;
}
cdb[10] = 0;
cdb[11] = 0;
- rc = cciss_scsi_do_simple_cmd(c, cp, scsi3addr,
+ rc = cciss_scsi_do_simple_cmd(h, c, scsi3addr,
cdb, 12,
(unsigned char *) buf,
bufsize, XFER_READ);
if (rc != 0) return rc; /* something went wrong */
- ei = cp->err_info;
+ ei = c->err_info;
if (ei->CommandStatus != 0 &&
ei->CommandStatus != CMD_DATA_UNDERRUN) {
- cciss_scsi_interpret_error(cp);
+ cciss_scsi_interpret_error(h, c);
rc = -1;
}
- spin_lock_irqsave(CCISS_LOCK(c->ctlr), flags);
- scsi_cmd_free(c, cp);
- spin_unlock_irqrestore(CCISS_LOCK(c->ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
+ scsi_cmd_free(h, c);
+ spin_unlock_irqrestore(&h->lock, flags);
return rc;
}
static void
-cciss_update_non_disk_devices(int cntl_num, int hostno)
+cciss_update_non_disk_devices(ctlr_info_t *h, int hostno)
{
/* the idea here is we could get notified from /proc
that some devices have changed, so we do a report
ReportLunData_struct *ld_buff;
unsigned char *inq_buff;
unsigned char scsi3addr[8];
- ctlr_info_t *c;
__u32 num_luns=0;
unsigned char *ch;
- /* unsigned char found[CCISS_MAX_SCSI_DEVS_PER_HBA]; */
- struct cciss_scsi_dev_t currentsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
+ struct cciss_scsi_dev_t *currentsd, *this_device;
int ncurrent=0;
int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8;
int i;
- c = (ctlr_info_t *) hba[cntl_num];
- ld_buff = kmalloc(reportlunsize, GFP_KERNEL);
- if (ld_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- return;
- }
- memset(ld_buff, 0, reportlunsize);
+ ld_buff = kzalloc(reportlunsize, GFP_KERNEL);
inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
- if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- kfree(ld_buff);
- return;
+ currentsd = kzalloc(sizeof(*currentsd) *
+ (CCISS_MAX_SCSI_DEVS_PER_HBA+1), GFP_KERNEL);
+ if (ld_buff == NULL || inq_buff == NULL || currentsd == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto out;
}
-
- if (cciss_scsi_do_report_phys_luns(c, ld_buff, reportlunsize) == 0) {
+ this_device = ¤tsd[CCISS_MAX_SCSI_DEVS_PER_HBA];
+ if (cciss_scsi_do_report_phys_luns(h, ld_buff, reportlunsize) == 0) {
ch = &ld_buff->LUNListLength[0];
num_luns = ((ch[0]<<24) | (ch[1]<<16) | (ch[2]<<8) | ch[3]) / 8;
if (num_luns > CISS_MAX_PHYS_LUN) {
/* adjust our table of devices */
- for(i=0; i<num_luns; i++)
- {
- int devtype;
-
+ for (i = 0; i < num_luns; i++) {
/* for each physical lun, do an inquiry */
if (ld_buff->LUN[i][3] & 0xC0) continue;
memset(inq_buff, 0, OBDR_TAPE_INQ_SIZE);
memcpy(&scsi3addr[0], &ld_buff->LUN[i][0], 8);
- if (cciss_scsi_do_inquiry(hba[cntl_num], scsi3addr, inq_buff,
- (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
+ if (cciss_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
+ (unsigned char) OBDR_TAPE_INQ_SIZE) != 0)
/* Inquiry failed (msg printed already) */
- devtype = 0; /* so we will skip this device. */
- } else /* what kind of device is this? */
- devtype = (inq_buff[0] & 0x1f);
-
- switch (devtype)
+ continue; /* so we will skip this device. */
+
+ this_device->devtype = (inq_buff[0] & 0x1f);
+ this_device->bus = -1;
+ this_device->target = -1;
+ this_device->lun = -1;
+ memcpy(this_device->scsi3addr, scsi3addr, 8);
+ memcpy(this_device->vendor, &inq_buff[8],
+ sizeof(this_device->vendor));
+ memcpy(this_device->model, &inq_buff[16],
+ sizeof(this_device->model));
+ memcpy(this_device->revision, &inq_buff[32],
+ sizeof(this_device->revision));
+ memset(this_device->device_id, 0,
+ sizeof(this_device->device_id));
+ cciss_scsi_get_device_id(h, scsi3addr,
+ this_device->device_id, sizeof(this_device->device_id));
+
+ switch (this_device->devtype)
{
case 0x05: /* CD-ROM */ {
case 0x08: /* medium changer */
if (ncurrent >= CCISS_MAX_SCSI_DEVS_PER_HBA) {
printk(KERN_INFO "cciss%d: %s ignored, "
- "too many devices.\n", cntl_num,
- DEVICETYPE(devtype));
+ "too many devices.\n", h->ctlr,
+ scsi_device_type(this_device->devtype));
break;
}
- memcpy(¤tsd[ncurrent].scsi3addr[0],
- &scsi3addr[0], 8);
- currentsd[ncurrent].devtype = devtype;
- currentsd[ncurrent].bus = -1;
- currentsd[ncurrent].target = -1;
- currentsd[ncurrent].lun = -1;
+ currentsd[ncurrent] = *this_device;
ncurrent++;
break;
default:
}
}
- adjust_cciss_scsi_table(cntl_num, hostno, currentsd, ncurrent);
+ adjust_cciss_scsi_table(h, hostno, currentsd, ncurrent);
out:
kfree(inq_buff);
kfree(ld_buff);
+ kfree(currentsd);
return;
}
}
static int
-cciss_scsi_user_command(int ctlr, int hostno, char *buffer, int length)
+cciss_scsi_user_command(ctlr_info_t *h, int hostno, char *buffer, int length)
{
int arg_len;
if ((arg_len = is_keyword(buffer, length, "rescan")) != 0)
- cciss_update_non_disk_devices(ctlr, hostno);
+ cciss_update_non_disk_devices(h, hostno);
else
return -EINVAL;
return length;
{
int buflen, datalen;
- ctlr_info_t *ci;
- int cntl_num;
-
+ ctlr_info_t *h;
+ int i;
- ci = (ctlr_info_t *) sh->hostdata[0];
- if (ci == NULL) /* This really shouldn't ever happen. */
+ h = (ctlr_info_t *) sh->hostdata[0];
+ if (h == NULL) /* This really shouldn't ever happen. */
return -EINVAL;
- cntl_num = ci->ctlr; /* Get our index into the hba[] array */
-
if (func == 0) { /* User is reading from /proc/scsi/ciss*?/?* */
- buflen = sprintf(buffer, "hostnum=%d\n", sh->host_no);
-
+ buflen = sprintf(buffer, "cciss%d: SCSI host: %d\n",
+ h->ctlr, sh->host_no);
+
+ /* this information is needed by apps to know which cciss
+ device corresponds to which scsi host number without
+ having to open a scsi target device node. The device
+ information is not a duplicate of /proc/scsi/scsi because
+ the two may be out of sync due to scsi hotplug, rather
+ this info is for an app to be able to use to know how to
+ get them back in sync. */
+
+ for (i = 0; i < ccissscsi[h->ctlr].ndevices; i++) {
+ struct cciss_scsi_dev_t *sd =
+ &ccissscsi[h->ctlr].dev[i];
+ buflen += sprintf(&buffer[buflen], "c%db%dt%dl%d %02d "
+ "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ sh->host_no, sd->bus, sd->target, sd->lun,
+ sd->devtype,
+ sd->scsi3addr[0], sd->scsi3addr[1],
+ sd->scsi3addr[2], sd->scsi3addr[3],
+ sd->scsi3addr[4], sd->scsi3addr[5],
+ sd->scsi3addr[6], sd->scsi3addr[7]);
+ }
datalen = buflen - offset;
if (datalen < 0) { /* they're reading past EOF. */
datalen = 0;
*start = buffer + offset;
return(datalen);
} else /* User is writing to /proc/scsi/cciss*?/?* ... */
- return cciss_scsi_user_command(cntl_num, sh->host_no,
+ return cciss_scsi_user_command(h, sh->host_no,
buffer, length);
}
/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
- cciss command, cp. */
+ cciss command, c. */
-static void
-cciss_scatter_gather(struct pci_dev *pdev,
- CommandList_struct *cp,
- struct scsi_cmnd *cmd)
+static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
+ struct scsi_cmnd *cmd)
{
- unsigned int use_sg, nsegs=0, len;
- struct scatterlist *scatter = (struct scatterlist *) cmd->buffer;
+ unsigned int len;
+ struct scatterlist *sg;
__u64 addr64;
-
- /* is it just one virtual address? */
- if (!cmd->use_sg) {
- if (cmd->request_bufflen) { /* anything to xfer? */
-
- addr64 = (__u64) pci_map_single(pdev,
- cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
-
- cp->SG[0].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = cmd->request_bufflen;
- nsegs=1;
- }
- } /* else, must be a list of virtual addresses.... */
- else if (cmd->use_sg <= MAXSGENTRIES) { /* not too many addrs? */
-
- use_sg = pci_map_sg(pdev, cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
-
- for (nsegs=0; nsegs < use_sg; nsegs++) {
- addr64 = (__u64) sg_dma_address(&scatter[nsegs]);
- len = sg_dma_len(&scatter[nsegs]);
- cp->SG[nsegs].Addr.lower =
- (__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
- cp->SG[nsegs].Addr.upper =
- (__u32) ((addr64 >> 32) & (__u64) 0x00000000FFFFFFFF);
- cp->SG[nsegs].Len = len;
- cp->SG[nsegs].Ext = 0; // we are not chaining
+ int request_nsgs, i, chained, sg_index;
+ struct cciss_scsi_adapter_data_t *sa = h->scsi_ctlr;
+ SGDescriptor_struct *curr_sg;
+
+ BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);
+
+ chained = 0;
+ sg_index = 0;
+ curr_sg = c->SG;
+ request_nsgs = scsi_dma_map(cmd);
+ if (request_nsgs) {
+ scsi_for_each_sg(cmd, sg, request_nsgs, i) {
+ if (sg_index + 1 == h->max_cmd_sgentries &&
+ !chained && request_nsgs - i > 1) {
+ chained = 1;
+ sg_index = 0;
+ curr_sg = sa->cmd_sg_list[c->cmdindex];
+ }
+ addr64 = (__u64) sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ curr_sg[sg_index].Addr.lower =
+ (__u32) (addr64 & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Addr.upper =
+ (__u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
+ curr_sg[sg_index].Len = len;
+ curr_sg[sg_index].Ext = 0;
+ ++sg_index;
}
- } else BUG();
-
- cp->Header.SGList = (__u8) nsegs; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (__u16) nsegs; /* total sgs in this cmd list */
+ if (chained)
+ cciss_map_sg_chain_block(h, c,
+ sa->cmd_sg_list[c->cmdindex],
+ (request_nsgs - (h->max_cmd_sgentries - 1)) *
+ sizeof(SGDescriptor_struct));
+ }
+ /* track how many SG entries we are using */
+ if (request_nsgs > h->maxSG)
+ h->maxSG = request_nsgs;
+ c->Header.SGTotal = (u16) request_nsgs + chained;
+ if (request_nsgs > h->max_cmd_sgentries)
+ c->Header.SGList = h->max_cmd_sgentries;
+ else
+ c->Header.SGList = c->Header.SGTotal;
return;
}
static int
-cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
- ctlr_info_t **c;
- int ctlr, rc;
+ ctlr_info_t *h;
+ int rc;
unsigned char scsi3addr[8];
- CommandList_struct *cp;
+ CommandList_struct *c;
unsigned long flags;
// Get the ptr to our adapter structure (hba[i]) out of cmd->host.
// We violate cmd->host privacy here. (Is there another way?)
- c = (ctlr_info_t **) &cmd->device->host->hostdata[0];
- ctlr = (*c)->ctlr;
+ h = (ctlr_info_t *) cmd->device->host->hostdata[0];
- rc = lookup_scsi3addr(ctlr, cmd->device->channel, cmd->device->id,
+ rc = lookup_scsi3addr(h, cmd->device->channel, cmd->device->id,
cmd->device->lun, scsi3addr);
if (rc != 0) {
/* the scsi nexus does not match any that we presented... */
return 0;
}
- /* printk("cciss_queue_command, p=%p, cmd=0x%02x, c%db%dt%dl%d\n",
- cmd, cmd->cmnd[0], ctlr, cmd->channel, cmd->target, cmd->lun);*/
- // printk("q:%p:c%db%dt%dl%d ", cmd, ctlr, cmd->channel,
- // cmd->target, cmd->lun);
-
/* Ok, we have a reasonable scsi nexus, so send the cmd down, and
see what the device thinks of it. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- cp = scsi_cmd_alloc(*c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- if (cp == NULL) { /* trouble... */
- printk("scsi_cmd_alloc returned NULL!\n");
+ spin_lock_irqsave(&h->lock, flags);
+ c = scsi_cmd_alloc(h);
+ spin_unlock_irqrestore(&h->lock, flags);
+ if (c == NULL) { /* trouble... */
+ dev_warn(&h->pdev->dev, "scsi_cmd_alloc returned NULL!\n");
/* FIXME: next 3 lines are -> BAD! <- */
cmd->result = DID_NO_CONNECT << 16;
done(cmd);
cmd->scsi_done = done; // save this for use by completion code
- // save cp in case we have to abort it
- cmd->host_scribble = (unsigned char *) cp;
+ /* save c in case we have to abort it */
+ cmd->host_scribble = (unsigned char *) c;
- cp->cmd_type = CMD_SCSI;
- cp->scsi_cmd = cmd;
- cp->Header.ReplyQueue = 0; // unused in simple mode
- memcpy(&cp->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- cp->Header.Tag.lower = cp->busaddr; // Use k. address of cmd as tag
+ c->cmd_type = CMD_SCSI;
+ c->scsi_cmd = cmd;
+ c->Header.ReplyQueue = 0; /* unused in simple mode */
+ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
+ c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */
// Fill in the request block...
- cp->Request.Timeout = 0;
- memset(cp->Request.CDB, 0, sizeof(cp->Request.CDB));
- if (cmd->cmd_len > sizeof(cp->Request.CDB)) BUG();
- cp->Request.CDBLen = cmd->cmd_len;
- memcpy(cp->Request.CDB, cmd->cmnd, cmd->cmd_len);
- cp->Request.Type.Type = TYPE_CMD;
- cp->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Timeout = 0;
+ memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
+ BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
+ c->Request.CDBLen = cmd->cmd_len;
+ memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
+ c->Request.Type.Type = TYPE_CMD;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
switch(cmd->sc_data_direction)
{
- case DMA_TO_DEVICE: cp->Request.Type.Direction = XFER_WRITE; break;
- case DMA_FROM_DEVICE: cp->Request.Type.Direction = XFER_READ; break;
- case DMA_NONE: cp->Request.Type.Direction = XFER_NONE; break;
+ case DMA_TO_DEVICE:
+ c->Request.Type.Direction = XFER_WRITE;
+ break;
+ case DMA_FROM_DEVICE:
+ c->Request.Type.Direction = XFER_READ;
+ break;
+ case DMA_NONE:
+ c->Request.Type.Direction = XFER_NONE;
+ break;
case DMA_BIDIRECTIONAL:
// This can happen if a buggy application does a scsi passthru
// and sets both inlen and outlen to non-zero. ( see
// ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
- cp->Request.Type.Direction = XFER_RSVD;
+ c->Request.Type.Direction = XFER_RSVD;
// This is technically wrong, and cciss controllers should
// reject it with CMD_INVALID, which is the most correct
// response, but non-fibre backends appear to let it
break;
default:
- printk("cciss: unknown data direction: %d\n",
+ dev_warn(&h->pdev->dev, "unknown data direction: %d\n",
cmd->sc_data_direction);
BUG();
break;
}
-
- cciss_scatter_gather((*c)->pdev, cp, cmd); // Fill the SG list
-
- /* Put the request on the tail of the request queue */
-
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- addQ(&(*c)->reqQ, cp);
- (*c)->Qdepth++;
- start_io(*c);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-
+ cciss_scatter_gather(h, c, cmd);
+ enqueue_cmd_and_start_io(h, c);
/* the cmd'll come back via intr handler in complete_scsi_command() */
return 0;
}
-static void
-cciss_unregister_scsi(int ctlr)
+static DEF_SCSI_QCMD(cciss_scsi_queue_command)
+
+static void cciss_unregister_scsi(ctlr_info_t *h)
{
struct cciss_scsi_adapter_data_t *sa;
struct cciss_scsi_cmd_stack_t *stk;
/* we are being forcibly unloaded, and may not refuse. */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
stk = &sa->cmd_stack;
/* if we weren't ever actually registered, don't unregister */
if (sa->registered) {
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(&h->lock, flags);
scsi_remove_host(sa->scsi_host);
scsi_host_put(sa->scsi_host);
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(&h->lock, flags);
}
/* set scsi_host to NULL so our detect routine will
find us on register */
sa->scsi_host = NULL;
- scsi_cmd_stack_free(ctlr);
+ spin_unlock_irqrestore(&h->lock, flags);
+ scsi_cmd_stack_free(h);
kfree(sa);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
}
-static int
-cciss_register_scsi(int ctlr)
+static int cciss_engage_scsi(ctlr_info_t *h)
{
+ struct cciss_scsi_adapter_data_t *sa;
+ struct cciss_scsi_cmd_stack_t *stk;
unsigned long flags;
- CPQ_TAPE_LOCK(ctlr, flags);
-
- /* Since this is really a block driver, the SCSI core may not be
- initialized at init time, in which case, calling scsi_register_host
- would hang. Instead, we do it later, via /proc filesystem
- and rc scripts, when we know SCSI core is good to go. */
+ spin_lock_irqsave(&h->lock, flags);
+ sa = h->scsi_ctlr;
+ stk = &sa->cmd_stack;
- /* Only register if SCSI devices are detected. */
- if (ccissscsi[ctlr].ndevices != 0) {
- ((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered = 1;
- CPQ_TAPE_UNLOCK(ctlr, flags);
- return cciss_scsi_detect(ctlr);
+ if (sa->registered) {
+ dev_info(&h->pdev->dev, "SCSI subsystem already engaged.\n");
+ spin_unlock_irqrestore(&h->lock, flags);
+ return -ENXIO;
}
- CPQ_TAPE_UNLOCK(ctlr, flags);
- printk(KERN_INFO
- "cciss%d: No appropriate SCSI device detected, "
- "SCSI subsystem not engaged.\n", ctlr);
+ sa->registered = 1;
+ spin_unlock_irqrestore(&h->lock, flags);
+ cciss_update_non_disk_devices(h, -1);
+ cciss_scsi_detect(h);
return 0;
}
-static int
-cciss_engage_scsi(int ctlr)
+static void
+cciss_seq_tape_report(struct seq_file *seq, ctlr_info_t *h)
{
- struct cciss_scsi_adapter_data_t *sa;
- struct cciss_scsi_cmd_stack_t *stk;
unsigned long flags;
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
- sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr;
- stk = &sa->cmd_stack;
+ CPQ_TAPE_LOCK(h, flags);
+ seq_printf(seq,
+ "Sequential access devices: %d\n\n",
+ ccissscsi[h->ctlr].ndevices);
+ CPQ_TAPE_UNLOCK(h, flags);
+}
- if (((struct cciss_scsi_adapter_data_t *)
- hba[ctlr]->scsi_ctlr)->registered) {
- printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return ENXIO;
+static int wait_for_device_to_become_ready(ctlr_info_t *h,
+ unsigned char lunaddr[])
+{
+ int rc;
+ int count = 0;
+ int waittime = HZ;
+ CommandList_struct *c;
+
+ c = cmd_alloc(h);
+ if (!c) {
+ dev_warn(&h->pdev->dev, "out of memory in "
+ "wait_for_device_to_become_ready.\n");
+ return IO_ERROR;
}
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- cciss_update_non_disk_devices(ctlr, -1);
- cciss_register_scsi(ctlr);
- return 0;
+
+ /* Send test unit ready until device ready, or give up. */
+ while (count < 20) {
+
+ /* Wait for a bit. do this first, because if we send
+ * the TUR right away, the reset will just abort it.
+ */
+ schedule_timeout_uninterruptible(waittime);
+ count++;
+
+ /* Increase wait time with each try, up to a point. */
+ if (waittime < (HZ * 30))
+ waittime = waittime * 2;
+
+ /* Send the Test Unit Ready */
+ rc = fill_cmd(h, c, TEST_UNIT_READY, NULL, 0, 0,
+ lunaddr, TYPE_CMD);
+ if (rc == 0)
+ rc = sendcmd_withirq_core(h, c, 0);
+
+ (void) process_sendcmd_error(h, c);
+
+ if (rc != 0)
+ goto retry_tur;
+
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ break;
+
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
+ if (c->err_info->SenseInfo[2] == NO_SENSE)
+ break;
+ if (c->err_info->SenseInfo[2] == UNIT_ATTENTION) {
+ unsigned char asc;
+ asc = c->err_info->SenseInfo[12];
+ check_for_unit_attention(h, c);
+ if (asc == POWER_OR_RESET)
+ break;
+ }
+ }
+retry_tur:
+ dev_warn(&h->pdev->dev, "Waiting %d secs "
+ "for device to become ready.\n",
+ waittime / HZ);
+ rc = 1; /* device not ready. */
+ }
+
+ if (rc)
+ dev_warn(&h->pdev->dev, "giving up on device.\n");
+ else
+ dev_warn(&h->pdev->dev, "device is ready.\n");
+
+ cmd_free(h, c);
+ return rc;
}
-static void
-cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
+/* Need at least one of these error handlers to keep ../scsi/hosts.c from
+ * complaining. Doing a host- or bus-reset can't do anything good here.
+ * Despite what it might say in scsi_error.c, there may well be commands
+ * on the controller, as the cciss driver registers twice, once as a block
+ * device for the logical drives, and once as a scsi device, for any tape
+ * drives. So we know there are no commands out on the tape drives, but we
+ * don't know there are no commands on the controller, and it is likely
+ * that there probably are, as the cciss block device is most commonly used
+ * as a boot device (embedded controller on HP/Compaq systems.)
+*/
+
+static int cciss_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
- unsigned long flags;
- int size;
+ int rc;
+ CommandList_struct *cmd_in_trouble;
+ unsigned char lunaddr[8];
+ ctlr_info_t *h;
+
+ /* find the controller to which the command to be aborted was sent */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
+ return FAILED;
+ dev_warn(&h->pdev->dev, "resetting tape drive or medium changer.\n");
+ /* find the command that's giving us trouble */
+ cmd_in_trouble = (CommandList_struct *) scsicmd->host_scribble;
+ if (cmd_in_trouble == NULL) /* paranoia */
+ return FAILED;
+ memcpy(lunaddr, &cmd_in_trouble->Header.LUN.LunAddrBytes[0], 8);
+ /* send a reset to the SCSI LUN which the command was sent to */
+ rc = sendcmd_withirq(h, CCISS_RESET_MSG, NULL, 0, 0, lunaddr,
+ TYPE_MSG);
+ if (rc == 0 && wait_for_device_to_become_ready(h, lunaddr) == 0)
+ return SUCCESS;
+ dev_warn(&h->pdev->dev, "resetting device failed.\n");
+ return FAILED;
+}
- *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline
+static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd)
+{
+ int rc;
+ CommandList_struct *cmd_to_abort;
+ unsigned char lunaddr[8];
+ ctlr_info_t *h;
+
+ /* find the controller to which the command to be aborted was sent */
+ h = (ctlr_info_t *) scsicmd->device->host->hostdata[0];
+ if (h == NULL) /* paranoia */
+ return FAILED;
+ dev_warn(&h->pdev->dev, "aborting tardy SCSI cmd\n");
+
+ /* find the command to be aborted */
+ cmd_to_abort = (CommandList_struct *) scsicmd->host_scribble;
+ if (cmd_to_abort == NULL) /* paranoia */
+ return FAILED;
+ memcpy(lunaddr, &cmd_to_abort->Header.LUN.LunAddrBytes[0], 8);
+ rc = sendcmd_withirq(h, CCISS_ABORT_MSG, &cmd_to_abort->Header.Tag,
+ 0, 0, lunaddr, TYPE_MSG);
+ if (rc == 0)
+ return SUCCESS;
+ return FAILED;
- CPQ_TAPE_LOCK(ctlr, flags);
- size = sprintf(buffer + *len,
- " Sequential access devices: %d\n\n",
- ccissscsi[ctlr].ndevices);
- CPQ_TAPE_UNLOCK(ctlr, flags);
- *pos += size; *len += size;
}
#else /* no CONFIG_CISS_SCSI_TAPE */
/* If no tape support, then these become defined out of existence */
#define cciss_scsi_setup(cntl_num)
-#define cciss_unregister_scsi(ctlr)
-#define cciss_register_scsi(ctlr)
-#define cciss_proc_tape_report(ctlr, buffer, pos, len)
+#define cciss_engage_scsi(h)
#endif /* CONFIG_CISS_SCSI_TAPE */