return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
}
+static void sandybridge_blit_fbc_update(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 blt_ecoskpd;
+
+ /* Make sure blitter notifies FBC of writes */
+ __gen6_gt_force_wake_get(dev_priv);
+ blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
+ blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
+ GEN6_BLITTER_LOCK_SHIFT;
+ I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+ blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
+ I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+ blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
+ GEN6_BLITTER_LOCK_SHIFT);
+ I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+ POSTING_READ(GEN6_BLITTER_ECOSKPD);
+ __gen6_gt_force_wake_put(dev_priv);
+}
+
static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
{
struct drm_device *dev = crtc->dev;
I915_WRITE(SNB_DPFC_CTL_SA,
SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence);
I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
+ sandybridge_blit_fbc_update(dev);
}
DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
wait_event(dev_priv->pending_flip_queue,
+ atomic_read(&dev_priv->mm.wedged) ||
atomic_read(&obj->pending_flip) == 0);
/* Big Hammer, we also need to ensure that any pending
* MI_WAIT_FOR_EVENT inside a user batch buffer on the
* current scanout is retired before unpinning the old
* framebuffer.
+ *
+ * This should only fail upon a hung GPU, in which case we
+ * can safely continue.
*/
ret = i915_gem_object_flush_gpu(obj, false);
- if (ret) {
- i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
- mutex_unlock(&dev->struct_mutex);
- return ret;
- }
+ (void) ret;
}
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
atomic_read(&obj->pending_flip) == 0);
}
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_mode_config *mode_config = &dev->mode_config;
+ struct intel_encoder *encoder;
+
+ /*
+ * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+ * must be driven by its own crtc; no sharing is possible.
+ */
+ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
+ if (encoder->base.crtc != crtc)
+ continue;
+
+ switch (encoder->type) {
+ case INTEL_OUTPUT_EDP:
+ if (!intel_encoder_is_pch_edp(&encoder->base))
+ return false;
+ continue;
+ }
+ }
+
+ return true;
+}
+
static void ironlake_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 reg, temp;
+ bool is_pch_port = false;
if (intel_crtc->active)
return;
I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
}
- ironlake_fdi_enable(crtc);
+ is_pch_port = intel_crtc_driving_pch(crtc);
+
+ if (is_pch_port)
+ ironlake_fdi_enable(crtc);
+ else {
+ /* disable CPU FDI tx and PCH FDI rx */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+ POSTING_READ(reg);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(0x7 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ /* Ironlake workaround, disable clock pointer after downing FDI */
+ if (HAS_PCH_IBX(dev))
+ I915_WRITE(FDI_RX_CHICKEN(pipe),
+ I915_READ(FDI_RX_CHICKEN(pipe) &
+ ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+
+ /* still set train pattern 1 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ /* BPC in FDI rx is consistent with that in PIPECONF */
+ temp &= ~(0x07 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(100);
+ }
/* Enable panel fitting for LVDS */
if (dev_priv->pch_pf_size &&
intel_flush_display_plane(dev, plane);
}
+ /* Skip the PCH stuff if possible */
+ if (!is_pch_port)
+ goto done;
+
/* For PCH output, training FDI link */
if (IS_GEN6(dev))
gen6_fdi_link_train(crtc);
I915_WRITE(reg, temp | TRANS_ENABLE);
if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
DRM_ERROR("failed to enable transcoder %d\n", pipe);
-
+done:
intel_crtc_load_lut(crtc);
intel_update_fbc(dev);
intel_crtc_update_cursor(crtc, true);
sr_hdisplay, sr_htotal, pixel_size);
}
+static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
+{
+ return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
+}
+
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
num_connectors++;
}
- if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) {
+ if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
refclk = dev_priv->lvds_ssc_freq * 1000;
DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
refclk / 1000);
udelay(200);
if (has_edp_encoder) {
- if (dev_priv->lvds_use_ssc) {
+ if (intel_panel_use_ssc(dev_priv)) {
temp |= DREF_SSC1_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
/* Enable CPU source on CPU attached eDP */
if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- if (dev_priv->lvds_use_ssc)
+ if (intel_panel_use_ssc(dev_priv))
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
else
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else {
/* Enable SSC on PCH eDP if needed */
- if (dev_priv->lvds_use_ssc) {
+ if (intel_panel_use_ssc(dev_priv)) {
DRM_ERROR("enabling SSC on PCH\n");
temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
}
int factor = 21;
if (is_lvds) {
- if ((dev_priv->lvds_use_ssc &&
+ if ((intel_panel_use_ssc(dev_priv) &&
dev_priv->lvds_ssc_freq == 100) ||
(I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
factor = 25;
/* XXX: just matching BIOS for now */
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
- else if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2)
+ else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
return ret;
}
-static struct drm_crtc_helper_funcs intel_helper_funcs = {
- .dpms = intel_crtc_dpms,
- .mode_fixup = intel_crtc_mode_fixup,
- .mode_set = intel_crtc_mode_set,
- .mode_set_base = intel_pipe_set_base,
- .mode_set_base_atomic = intel_pipe_set_base_atomic,
- .load_lut = intel_crtc_load_lut,
- .disable = intel_crtc_disable,
-};
-
-static const struct drm_crtc_funcs intel_crtc_funcs = {
- .cursor_set = intel_crtc_cursor_set,
- .cursor_move = intel_crtc_cursor_move,
- .gamma_set = intel_crtc_gamma_set,
- .set_config = drm_crtc_helper_set_config,
- .destroy = intel_crtc_destroy,
- .page_flip = intel_crtc_page_flip,
-};
-
static void intel_sanitize_modesetting(struct drm_device *dev,
int pipe, int plane)
{
}
}
+static void intel_crtc_reset(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ /* Reset flags back to the 'unknown' status so that they
+ * will be correctly set on the initial modeset.
+ */
+ intel_crtc->dpms_mode = -1;
+
+ /* We need to fix up any BIOS configuration that conflicts with
+ * our expectations.
+ */
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
+}
+
+static struct drm_crtc_helper_funcs intel_helper_funcs = {
+ .dpms = intel_crtc_dpms,
+ .mode_fixup = intel_crtc_mode_fixup,
+ .mode_set = intel_crtc_mode_set,
+ .mode_set_base = intel_pipe_set_base,
+ .mode_set_base_atomic = intel_pipe_set_base_atomic,
+ .load_lut = intel_crtc_load_lut,
+ .disable = intel_crtc_disable,
+};
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+ .reset = intel_crtc_reset,
+ .cursor_set = intel_crtc_cursor_set,
+ .cursor_move = intel_crtc_cursor_move,
+ .gamma_set = intel_crtc_gamma_set,
+ .set_config = drm_crtc_helper_set_config,
+ .destroy = intel_crtc_destroy,
+ .page_flip = intel_crtc_page_flip,
+};
+
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = dev->dev_private;
dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
- intel_crtc->cursor_addr = 0;
- intel_crtc->dpms_mode = -1;
+ intel_crtc_reset(&intel_crtc->base);
intel_crtc->active = true; /* force the pipe off on setup_init_config */
if (HAS_PCH_SPLIT(dev)) {
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
-
- intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
return ERR_PTR(-ENOENT);
intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
- if (!intel_fb)
+ if (!intel_fb) {
+ drm_gem_object_unreference_unlocked(&obj->base);
return ERR_PTR(-ENOMEM);
+ }
ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
if (ret) {
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
- __gen6_force_wake_get(dev_priv);
+ __gen6_gt_force_wake_get(dev_priv);
/* disable the counters and set deterministic thresholds */
I915_WRITE(GEN6_RC_CONTROL, 0);
/* enable all PM interrupts */
I915_WRITE(GEN6_PMINTRMSK, 0);
- __gen6_force_wake_put(dev_priv);
+ __gen6_gt_force_wake_put(dev_priv);
}
void intel_enable_clock_gating(struct drm_device *dev)
if (IS_GEN5(dev)) {
/* Required for FBC */
- dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE;
+ dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
+ DPFCRUNIT_CLOCK_GATE_DISABLE |
+ DPFDUNIT_CLOCK_GATE_DISABLE;
/* Required for CxSR */
dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
}
}
-void intel_disable_clock_gating(struct drm_device *dev)
+static void ironlake_teardown_rc6(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->renderctx) {
- struct drm_i915_gem_object *obj = dev_priv->renderctx;
-
- I915_WRITE(CCID, 0);
- POSTING_READ(CCID);
-
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(&obj->base);
+ i915_gem_object_unpin(dev_priv->renderctx);
+ drm_gem_object_unreference(&dev_priv->renderctx->base);
dev_priv->renderctx = NULL;
}
if (dev_priv->pwrctx) {
- struct drm_i915_gem_object *obj = dev_priv->pwrctx;
+ i915_gem_object_unpin(dev_priv->pwrctx);
+ drm_gem_object_unreference(&dev_priv->pwrctx->base);
+ dev_priv->pwrctx = NULL;
+ }
+}
+
+static void ironlake_disable_rc6(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (I915_READ(PWRCTXA)) {
+ /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
+ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
+ wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
+ 50);
I915_WRITE(PWRCTXA, 0);
POSTING_READ(PWRCTXA);
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(&obj->base);
- dev_priv->pwrctx = NULL;
+ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+ POSTING_READ(RSTDBYCTL);
}
+
+ ironlake_teardown_rc6(dev);
}
-static void ironlake_disable_rc6(struct drm_device *dev)
+static int ironlake_setup_rc6(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
- I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
- wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON),
- 10);
- POSTING_READ(CCID);
- I915_WRITE(PWRCTXA, 0);
- POSTING_READ(PWRCTXA);
- I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
- POSTING_READ(RSTDBYCTL);
- i915_gem_object_unpin(dev_priv->renderctx);
- drm_gem_object_unreference(&dev_priv->renderctx->base);
- dev_priv->renderctx = NULL;
- i915_gem_object_unpin(dev_priv->pwrctx);
- drm_gem_object_unreference(&dev_priv->pwrctx->base);
- dev_priv->pwrctx = NULL;
+ if (dev_priv->renderctx == NULL)
+ dev_priv->renderctx = intel_alloc_context_page(dev);
+ if (!dev_priv->renderctx)
+ return -ENOMEM;
+
+ if (dev_priv->pwrctx == NULL)
+ dev_priv->pwrctx = intel_alloc_context_page(dev);
+ if (!dev_priv->pwrctx) {
+ ironlake_teardown_rc6(dev);
+ return -ENOMEM;
+ }
+
+ return 0;
}
void ironlake_enable_rc6(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
+ /* rc6 disabled by default due to repeated reports of hanging during
+ * boot and resume.
+ */
+ if (!i915_enable_rc6)
+ return;
+
+ ret = ironlake_setup_rc6(dev);
+ if (ret)
+ return;
+
/*
* GPU can automatically power down the render unit if given a page
* to save state.
*/
ret = BEGIN_LP_RING(6);
if (ret) {
- ironlake_disable_rc6(dev);
+ ironlake_teardown_rc6(dev);
return;
}
+
OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
OUT_RING(MI_SET_CONTEXT);
OUT_RING(dev_priv->renderctx->gtt_offset |
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
}
+
/* Set up chip specific display functions */
static void intel_init_display(struct drm_device *dev)
{
if (IS_GEN6(dev))
gen6_enable_rps(dev_priv);
- if (IS_IRONLAKE_M(dev)) {
- dev_priv->renderctx = intel_alloc_context_page(dev);
- if (!dev_priv->renderctx)
- goto skip_rc6;
- dev_priv->pwrctx = intel_alloc_context_page(dev);
- if (!dev_priv->pwrctx) {
- i915_gem_object_unpin(dev_priv->renderctx);
- drm_gem_object_unreference(&dev_priv->renderctx->base);
- dev_priv->renderctx = NULL;
- goto skip_rc6;
- }
+ if (IS_IRONLAKE_M(dev))
ironlake_enable_rc6(dev);
- }
-skip_rc6:
INIT_WORK(&dev_priv->idle_work, intel_idle_update);
setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer,
(unsigned long)dev);
projects / linux-flexiantxendom0-natty.git / blobdiff