*/
#include "ath9k.h"
+#include "ar9003_mac.h"
+
+#define SKB_CB_ATHBUF(__skb) (*((struct ath_buf **)__skb->cb))
+
+static inline bool ath_is_alt_ant_ratio_better(int alt_ratio, int maxdelta,
+ int mindelta, int main_rssi_avg,
+ int alt_rssi_avg, int pkt_count)
+{
+ return (((alt_ratio >= ATH_ANT_DIV_COMB_ALT_ANT_RATIO2) &&
+ (alt_rssi_avg > main_rssi_avg + maxdelta)) ||
+ (alt_rssi_avg > main_rssi_avg + mindelta)) && (pkt_count > 50);
+}
+
+static inline bool ath9k_check_auto_sleep(struct ath_softc *sc)
+{
+ return sc->ps_enabled &&
+ (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP);
+}
static struct ieee80211_hw * ath_get_virt_hw(struct ath_softc *sc,
struct ieee80211_hdr *hdr)
static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
{
struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
struct sk_buff *skb;
BUG_ON(skb == NULL);
ds->ds_vdata = skb->data;
- /* setup rx descriptors. The rx.bufsize here tells the harware
+ /*
+ * setup rx descriptors. The rx_bufsize here tells the hardware
* how much data it can DMA to us and that we are prepared
- * to process */
+ * to process
+ */
ath9k_hw_setuprxdesc(ah, ds,
- sc->rx.bufsize,
+ common->rx_bufsize,
0);
if (sc->rx.rxlink == NULL)
sc->rx.rxotherant = 0;
}
-/*
- * Extend 15-bit time stamp from rx descriptor to
- * a full 64-bit TSF using the current h/w TSF.
-*/
-static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
+static void ath_opmode_init(struct ath_softc *sc)
{
- u64 tsf;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
- tsf = ath9k_hw_gettsf64(sc->sc_ah);
- if ((tsf & 0x7fff) < rstamp)
- tsf -= 0x8000;
- return (tsf & ~0x7fff) | rstamp;
+ u32 rfilt, mfilt[2];
+
+ /* configure rx filter */
+ rfilt = ath_calcrxfilter(sc);
+ ath9k_hw_setrxfilter(ah, rfilt);
+
+ /* configure bssid mask */
+ ath_hw_setbssidmask(common);
+
+ /* configure operational mode */
+ ath9k_hw_setopmode(ah);
+
+ /* calculate and install multicast filter */
+ mfilt[0] = mfilt[1] = ~0;
+ ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
}
-/*
- * For Decrypt or Demic errors, we only mark packet status here and always push
- * up the frame up to let mac80211 handle the actual error case, be it no
- * decryption key or real decryption error. This let us keep statistics there.
- */
-static int ath_rx_prepare(struct ieee80211_hw *hw,
- struct sk_buff *skb, struct ath_desc *ds,
- struct ieee80211_rx_status *rx_status, bool *decrypt_error,
- struct ath_softc *sc)
+static bool ath_rx_edma_buf_link(struct ath_softc *sc,
+ enum ath9k_rx_qtype qtype)
{
- struct ieee80211_hdr *hdr;
- u8 ratecode;
- __le16 fc;
- struct ieee80211_sta *sta;
- struct ath_node *an;
- int last_rssi = ATH_RSSI_DUMMY_MARKER;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_rx_edma *rx_edma;
+ struct sk_buff *skb;
+ struct ath_buf *bf;
- hdr = (struct ieee80211_hdr *)skb->data;
- fc = hdr->frame_control;
- memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+ rx_edma = &sc->rx.rx_edma[qtype];
+ if (skb_queue_len(&rx_edma->rx_fifo) >= rx_edma->rx_fifo_hwsize)
+ return false;
- if (ds->ds_rxstat.rs_more) {
- /*
- * Frame spans multiple descriptors; this cannot happen yet
- * as we don't support jumbograms. If not in monitor mode,
- * discard the frame. Enable this if you want to see
- * error frames in Monitor mode.
- */
- if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR)
- goto rx_next;
- } else if (ds->ds_rxstat.rs_status != 0) {
- if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
- rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
- if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY)
- goto rx_next;
-
- if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) {
- *decrypt_error = true;
- } else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) {
- if (ieee80211_is_ctl(fc))
- /*
- * Sometimes, we get invalid
- * MIC failures on valid control frames.
- * Remove these mic errors.
- */
- ds->ds_rxstat.rs_status &= ~ATH9K_RXERR_MIC;
- else
- rx_status->flag |= RX_FLAG_MMIC_ERROR;
- }
- /*
- * Reject error frames with the exception of
- * decryption and MIC failures. For monitor mode,
- * we also ignore the CRC error.
- */
- if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) {
- if (ds->ds_rxstat.rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
- ATH9K_RXERR_CRC))
- goto rx_next;
- } else {
- if (ds->ds_rxstat.rs_status &
- ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
- goto rx_next;
- }
- }
+ bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
+ list_del_init(&bf->list);
+
+ skb = bf->bf_mpdu;
+
+ ATH_RXBUF_RESET(bf);
+ memset(skb->data, 0, ah->caps.rx_status_len);
+ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
+ ah->caps.rx_status_len, DMA_TO_DEVICE);
+
+ SKB_CB_ATHBUF(skb) = bf;
+ ath9k_hw_addrxbuf_edma(ah, bf->bf_buf_addr, qtype);
+ skb_queue_tail(&rx_edma->rx_fifo, skb);
+
+ return true;
+}
+
+static void ath_rx_addbuffer_edma(struct ath_softc *sc,
+ enum ath9k_rx_qtype qtype, int size)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ u32 nbuf = 0;
+
+ if (list_empty(&sc->rx.rxbuf)) {
+ ath_dbg(common, ATH_DBG_QUEUE, "No free rx buf available\n");
+ return;
}
- ratecode = ds->ds_rxstat.rs_rate;
+ while (!list_empty(&sc->rx.rxbuf)) {
+ nbuf++;
- if (ratecode & 0x80) {
- /* HT rate */
- rx_status->flag |= RX_FLAG_HT;
- if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040)
- rx_status->flag |= RX_FLAG_40MHZ;
- if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI)
- rx_status->flag |= RX_FLAG_SHORT_GI;
- rx_status->rate_idx = ratecode & 0x7f;
- } else {
- int i = 0, cur_band, n_rates;
+ if (!ath_rx_edma_buf_link(sc, qtype))
+ break;
- cur_band = hw->conf.channel->band;
- n_rates = sc->sbands[cur_band].n_bitrates;
+ if (nbuf >= size)
+ break;
+ }
+}
- for (i = 0; i < n_rates; i++) {
- if (sc->sbands[cur_band].bitrates[i].hw_value ==
- ratecode) {
- rx_status->rate_idx = i;
- break;
- }
+static void ath_rx_remove_buffer(struct ath_softc *sc,
+ enum ath9k_rx_qtype qtype)
+{
+ struct ath_buf *bf;
+ struct ath_rx_edma *rx_edma;
+ struct sk_buff *skb;
- if (sc->sbands[cur_band].bitrates[i].hw_value_short ==
- ratecode) {
- rx_status->rate_idx = i;
- rx_status->flag |= RX_FLAG_SHORTPRE;
- break;
- }
- }
+ rx_edma = &sc->rx.rx_edma[qtype];
+
+ while ((skb = skb_dequeue(&rx_edma->rx_fifo)) != NULL) {
+ bf = SKB_CB_ATHBUF(skb);
+ BUG_ON(!bf);
+ list_add_tail(&bf->list, &sc->rx.rxbuf);
}
+}
+
+static void ath_rx_edma_cleanup(struct ath_softc *sc)
+{
+ struct ath_buf *bf;
- rcu_read_lock();
- /* XXX: use ieee80211_find_sta! */
- sta = ieee80211_find_sta_by_hw(sc->hw, hdr->addr2);
- if (sta) {
- an = (struct ath_node *) sta->drv_priv;
- if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD &&
- !ds->ds_rxstat.rs_moreaggr)
- ATH_RSSI_LPF(an->last_rssi, ds->ds_rxstat.rs_rssi);
- last_rssi = an->last_rssi;
+ ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
+ ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
+
+ list_for_each_entry(bf, &sc->rx.rxbuf, list) {
+ if (bf->bf_mpdu)
+ dev_kfree_skb_any(bf->bf_mpdu);
}
- rcu_read_unlock();
- if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
- ds->ds_rxstat.rs_rssi = ATH_EP_RND(last_rssi,
- ATH_RSSI_EP_MULTIPLIER);
- if (ds->ds_rxstat.rs_rssi < 0)
- ds->ds_rxstat.rs_rssi = 0;
- else if (ds->ds_rxstat.rs_rssi > 127)
- ds->ds_rxstat.rs_rssi = 127;
+ INIT_LIST_HEAD(&sc->rx.rxbuf);
- /* Update Beacon RSSI, this is used by ANI. */
- if (ieee80211_is_beacon(fc))
- sc->sc_ah->stats.avgbrssi = ds->ds_rxstat.rs_rssi;
+ kfree(sc->rx.rx_bufptr);
+ sc->rx.rx_bufptr = NULL;
+}
- rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
- rx_status->band = hw->conf.channel->band;
- rx_status->freq = hw->conf.channel->center_freq;
- rx_status->noise = sc->ani.noise_floor;
- rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + ds->ds_rxstat.rs_rssi;
- rx_status->antenna = ds->ds_rxstat.rs_antenna;
+static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size)
+{
+ skb_queue_head_init(&rx_edma->rx_fifo);
+ skb_queue_head_init(&rx_edma->rx_buffers);
+ rx_edma->rx_fifo_hwsize = size;
+}
- /*
- * Theory for reporting quality:
- *
- * At a hardware RSSI of 45 you will be able to use MCS 7 reliably.
- * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
- * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
- *
- * MCS 7 is the highets MCS index usable by a 1-stream device.
- * MCS 15 is the highest MCS index usable by a 2-stream device.
- *
- * All ath9k devices are either 1-stream or 2-stream.
- *
- * How many bars you see is derived from the qual reporting.
- *
- * A more elaborate scheme can be used here but it requires tables
- * of SNR/throughput for each possible mode used. For the MCS table
- * you can refer to the wireless wiki:
- *
- * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
- *
- */
- if (conf_is_ht(&hw->conf))
- rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 45;
- else
- rx_status->qual = ds->ds_rxstat.rs_rssi * 100 / 35;
+static int ath_rx_edma_init(struct ath_softc *sc, int nbufs)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_hw *ah = sc->sc_ah;
+ struct sk_buff *skb;
+ struct ath_buf *bf;
+ int error = 0, i;
+ u32 size;
- /* rssi can be more than 45 though, anything above that
- * should be considered at 100% */
- if (rx_status->qual > 100)
- rx_status->qual = 100;
- rx_status->flag |= RX_FLAG_TSFT;
+ common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN +
+ ah->caps.rx_status_len,
+ min(common->cachelsz, (u16)64));
+
+ ath9k_hw_set_rx_bufsize(ah, common->rx_bufsize -
+ ah->caps.rx_status_len);
+
+ ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_LP],
+ ah->caps.rx_lp_qdepth);
+ ath_rx_edma_init_queue(&sc->rx.rx_edma[ATH9K_RX_QUEUE_HP],
+ ah->caps.rx_hp_qdepth);
+
+ size = sizeof(struct ath_buf) * nbufs;
+ bf = kzalloc(size, GFP_KERNEL);
+ if (!bf)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&sc->rx.rxbuf);
+ sc->rx.rx_bufptr = bf;
+
+ for (i = 0; i < nbufs; i++, bf++) {
+ skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL);
+ if (!skb) {
+ error = -ENOMEM;
+ goto rx_init_fail;
+ }
+
+ memset(skb->data, 0, common->rx_bufsize);
+ bf->bf_mpdu = skb;
+
+ bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
+ common->rx_bufsize,
+ DMA_BIDIRECTIONAL);
+ if (unlikely(dma_mapping_error(sc->dev,
+ bf->bf_buf_addr))) {
+ dev_kfree_skb_any(skb);
+ bf->bf_mpdu = NULL;
+ bf->bf_buf_addr = 0;
+ ath_err(common,
+ "dma_mapping_error() on RX init\n");
+ error = -ENOMEM;
+ goto rx_init_fail;
+ }
+
+ list_add_tail(&bf->list, &sc->rx.rxbuf);
+ }
- return 1;
-rx_next:
return 0;
+
+rx_init_fail:
+ ath_rx_edma_cleanup(sc);
+ return error;
}
-static void ath_opmode_init(struct ath_softc *sc)
+static void ath_edma_start_recv(struct ath_softc *sc)
{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
+ spin_lock_bh(&sc->rx.rxbuflock);
- u32 rfilt, mfilt[2];
+ ath9k_hw_rxena(sc->sc_ah);
- /* configure rx filter */
- rfilt = ath_calcrxfilter(sc);
- ath9k_hw_setrxfilter(ah, rfilt);
+ ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP,
+ sc->rx.rx_edma[ATH9K_RX_QUEUE_HP].rx_fifo_hwsize);
- /* configure bssid mask */
- if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
- ath_hw_setbssidmask(common);
+ ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_LP,
+ sc->rx.rx_edma[ATH9K_RX_QUEUE_LP].rx_fifo_hwsize);
- /* configure operational mode */
- ath9k_hw_setopmode(ah);
+ ath_opmode_init(sc);
- /* Handle any link-level address change. */
- ath9k_hw_setmac(ah, common->macaddr);
+ ath9k_hw_startpcureceive(sc->sc_ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
- /* calculate and install multicast filter */
- mfilt[0] = mfilt[1] = ~0;
- ath9k_hw_setmcastfilter(ah, mfilt[0], mfilt[1]);
+ spin_unlock_bh(&sc->rx.rxbuflock);
+}
+
+static void ath_edma_stop_recv(struct ath_softc *sc)
+{
+ ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
+ ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
}
int ath_rx_init(struct ath_softc *sc, int nbufs)
struct ath_buf *bf;
int error = 0;
- spin_lock_init(&sc->rx.rxflushlock);
+ spin_lock_init(&sc->sc_pcu_lock);
sc->sc_flags &= ~SC_OP_RXFLUSH;
spin_lock_init(&sc->rx.rxbuflock);
- sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
- min(common->cachelsz, (u16)64));
-
- ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
- common->cachelsz, sc->rx.bufsize);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+ return ath_rx_edma_init(sc, nbufs);
+ } else {
+ common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+ min(common->cachelsz, (u16)64));
- /* Initialize rx descriptors */
+ ath_dbg(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+ common->cachelsz, common->rx_bufsize);
- error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
- "rx", nbufs, 1);
- if (error != 0) {
- ath_print(common, ATH_DBG_FATAL,
- "failed to allocate rx descriptors: %d\n", error);
- goto err;
- }
+ /* Initialize rx descriptors */
- list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_KERNEL);
- if (skb == NULL) {
- error = -ENOMEM;
+ error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
+ "rx", nbufs, 1, 0);
+ if (error != 0) {
+ ath_err(common,
+ "failed to allocate rx descriptors: %d\n",
+ error);
goto err;
}
- bf->bf_mpdu = skb;
- bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
- sc->rx.bufsize,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(sc->dev,
- bf->bf_buf_addr))) {
- dev_kfree_skb_any(skb);
- bf->bf_mpdu = NULL;
- ath_print(common, ATH_DBG_FATAL,
- "dma_mapping_error() on RX init\n");
- error = -ENOMEM;
- goto err;
+ list_for_each_entry(bf, &sc->rx.rxbuf, list) {
+ skb = ath_rxbuf_alloc(common, common->rx_bufsize,
+ GFP_KERNEL);
+ if (skb == NULL) {
+ error = -ENOMEM;
+ goto err;
+ }
+
+ bf->bf_mpdu = skb;
+ bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
+ common->rx_bufsize,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(sc->dev,
+ bf->bf_buf_addr))) {
+ dev_kfree_skb_any(skb);
+ bf->bf_mpdu = NULL;
+ bf->bf_buf_addr = 0;
+ ath_err(common,
+ "dma_mapping_error() on RX init\n");
+ error = -ENOMEM;
+ goto err;
+ }
}
- bf->bf_dmacontext = bf->bf_buf_addr;
+ sc->rx.rxlink = NULL;
}
- sc->rx.rxlink = NULL;
err:
if (error)
void ath_rx_cleanup(struct ath_softc *sc)
{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct sk_buff *skb;
struct ath_buf *bf;
- list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- skb = bf->bf_mpdu;
- if (skb) {
- dma_unmap_single(sc->dev, bf->bf_buf_addr,
- sc->rx.bufsize, DMA_FROM_DEVICE);
- dev_kfree_skb(skb);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+ ath_rx_edma_cleanup(sc);
+ return;
+ } else {
+ list_for_each_entry(bf, &sc->rx.rxbuf, list) {
+ skb = bf->bf_mpdu;
+ if (skb) {
+ dma_unmap_single(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb(skb);
+ bf->bf_buf_addr = 0;
+ bf->bf_mpdu = NULL;
+ }
}
- }
- if (sc->rx.rxdma.dd_desc_len != 0)
- ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf);
+ if (sc->rx.rxdma.dd_desc_len != 0)
+ ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf);
+ }
}
/*
| ATH9K_RX_FILTER_UCAST | ATH9K_RX_FILTER_BCAST
| ATH9K_RX_FILTER_MCAST;
- /* If not a STA, enable processing of Probe Requests */
- if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
+ if (sc->rx.rxfilter & FIF_PROBE_REQ)
rfilt |= ATH9K_RX_FILTER_PROBEREQ;
/*
* mode interface or when in monitor mode. AP mode does not need this
* since it receives all in-BSS frames anyway.
*/
- if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
- (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR))
+ if (sc->sc_ah->is_monitoring)
rfilt |= ATH9K_RX_FILTER_PROM;
if (sc->rx.rxfilter & FIF_CONTROL)
rfilt |= ATH9K_RX_FILTER_CONTROL;
if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) &&
+ (sc->nvifs <= 1) &&
!(sc->rx.rxfilter & FIF_BCN_PRBRESP_PROMISC))
rfilt |= ATH9K_RX_FILTER_MYBEACON;
else
rfilt |= ATH9K_RX_FILTER_BEACON;
- if ((AR_SREV_9280_10_OR_LATER(sc->sc_ah) ||
- AR_SREV_9285_10_OR_LATER(sc->sc_ah)) &&
+ if ((AR_SREV_9280_20_OR_LATER(sc->sc_ah) ||
+ AR_SREV_9285_12_OR_LATER(sc->sc_ah)) &&
(sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
(sc->rx.rxfilter & FIF_PSPOLL))
rfilt |= ATH9K_RX_FILTER_PSPOLL;
if (conf_is_ht(&sc->hw->conf))
rfilt |= ATH9K_RX_FILTER_COMP_BAR;
- if (sc->sec_wiphy || (sc->rx.rxfilter & FIF_OTHER_BSS)) {
- /* TODO: only needed if more than one BSSID is in use in
- * station/adhoc mode */
+ if (sc->sec_wiphy || (sc->nvifs > 1) ||
+ (sc->rx.rxfilter & FIF_OTHER_BSS)) {
/* The following may also be needed for other older chips */
if (sc->sc_ah->hw_version.macVersion == AR_SREV_VERSION_9160)
rfilt |= ATH9K_RX_FILTER_PROM;
struct ath_hw *ah = sc->sc_ah;
struct ath_buf *bf, *tbf;
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
+ ath_edma_start_recv(sc);
+ return 0;
+ }
+
spin_lock_bh(&sc->rx.rxbuflock);
if (list_empty(&sc->rx.rxbuf))
goto start_recv;
ath9k_hw_rxena(ah);
start_recv:
- spin_unlock_bh(&sc->rx.rxbuflock);
ath_opmode_init(sc);
- ath9k_hw_startpcureceive(ah);
+ ath9k_hw_startpcureceive(ah, (sc->sc_flags & SC_OP_OFFCHANNEL));
+
+ spin_unlock_bh(&sc->rx.rxbuflock);
return 0;
}
bool ath_stoprecv(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
- bool stopped;
+ bool stopped, reset = false;
- ath9k_hw_stoppcurecv(ah);
+ spin_lock_bh(&sc->rx.rxbuflock);
+ ath9k_hw_abortpcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
- stopped = ath9k_hw_stopdmarecv(ah);
- sc->rx.rxlink = NULL;
+ stopped = ath9k_hw_stopdmarecv(ah, &reset);
- return stopped;
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+ ath_edma_stop_recv(sc);
+ else
+ sc->rx.rxlink = NULL;
+ spin_unlock_bh(&sc->rx.rxbuflock);
+
+ if (!(ah->ah_flags & AH_UNPLUGGED) &&
+ unlikely(!stopped)) {
+ ath_err(ath9k_hw_common(sc->sc_ah),
+ "Could not stop RX, we could be "
+ "confusing the DMA engine when we start RX up\n");
+ ATH_DBG_WARN_ON_ONCE(!stopped);
+ }
+ return stopped && !reset;
}
void ath_flushrecv(struct ath_softc *sc)
{
- spin_lock_bh(&sc->rx.rxflushlock);
sc->sc_flags |= SC_OP_RXFLUSH;
- ath_rx_tasklet(sc, 1);
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
+ ath_rx_tasklet(sc, 1, true);
+ ath_rx_tasklet(sc, 1, false);
sc->sc_flags &= ~SC_OP_RXFLUSH;
- spin_unlock_bh(&sc->rx.rxflushlock);
}
static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
return; /* not from our current AP */
- sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
+ sc->ps_flags &= ~PS_WAIT_FOR_BEACON;
- if (sc->sc_flags & SC_OP_BEACON_SYNC) {
- sc->sc_flags &= ~SC_OP_BEACON_SYNC;
- ath_print(common, ATH_DBG_PS,
- "Reconfigure Beacon timers based on "
- "timestamp from the AP\n");
+ if (sc->ps_flags & PS_BEACON_SYNC) {
+ sc->ps_flags &= ~PS_BEACON_SYNC;
+ ath_dbg(common, ATH_DBG_PS,
+ "Reconfigure Beacon timers based on timestamp from the AP\n");
ath_beacon_config(sc, NULL);
}
* a backup trigger for returning into NETWORK SLEEP state,
* so we are waiting for it as well.
*/
- ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
- "buffered broadcast/multicast frame(s)\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
+ ath_dbg(common, ATH_DBG_PS,
+ "Received DTIM beacon indicating buffered broadcast/multicast frame(s)\n");
+ sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
return;
}
- if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
+ if (sc->ps_flags & PS_WAIT_FOR_CAB) {
/*
* This can happen if a broadcast frame is dropped or the AP
* fails to send a frame indicating that all CAB frames have
* been delivered.
*/
- sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- ath_print(common, ATH_DBG_PS,
- "PS wait for CAB frames timed out\n");
+ sc->ps_flags &= ~PS_WAIT_FOR_CAB;
+ ath_dbg(common, ATH_DBG_PS,
+ "PS wait for CAB frames timed out\n");
}
}
hdr = (struct ieee80211_hdr *)skb->data;
/* Process Beacon and CAB receive in PS state */
- if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
- ieee80211_is_beacon(hdr->frame_control))
+ if (((sc->ps_flags & PS_WAIT_FOR_BEACON) || ath9k_check_auto_sleep(sc))
+ && ieee80211_is_beacon(hdr->frame_control))
ath_rx_ps_beacon(sc, skb);
- else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
+ else if ((sc->ps_flags & PS_WAIT_FOR_CAB) &&
(ieee80211_is_data(hdr->frame_control) ||
ieee80211_is_action(hdr->frame_control)) &&
is_multicast_ether_addr(hdr->addr1) &&
* No more broadcast/multicast frames to be received at this
* point.
*/
- sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
- ath_print(common, ATH_DBG_PS,
- "All PS CAB frames received, back to sleep\n");
- } else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
+ sc->ps_flags &= ~(PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON);
+ ath_dbg(common, ATH_DBG_PS,
+ "All PS CAB frames received, back to sleep\n");
+ } else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
- sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
- ath_print(common, ATH_DBG_PS,
- "Going back to sleep after having received "
- "PS-Poll data (0x%x)\n",
- sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA |
- SC_OP_WAIT_FOR_TX_ACK));
+ sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
+ ath_dbg(common, ATH_DBG_PS,
+ "Going back to sleep after having received PS-Poll data (0x%lx)\n",
+ sc->ps_flags & (PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK));
}
}
static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw,
- struct ath_softc *sc, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
+ struct ath_softc *sc, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr;
if (aphy == NULL)
continue;
nskb = skb_copy(skb, GFP_ATOMIC);
- if (nskb) {
- memcpy(IEEE80211_SKB_RXCB(nskb), rx_status,
- sizeof(*rx_status));
- ieee80211_rx(aphy->hw, nskb);
- }
+ if (!nskb)
+ continue;
+ ieee80211_rx(aphy->hw, nskb);
}
- memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
ieee80211_rx(sc->hw, skb);
- } else {
+ } else
/* Deliver unicast frames based on receiver address */
- memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
ieee80211_rx(hw, skb);
- }
}
-int ath_rx_tasklet(struct ath_softc *sc, int flush)
+static bool ath_edma_get_buffers(struct ath_softc *sc,
+ enum ath9k_rx_qtype qtype)
{
-#define PA2DESC(_sc, _pa) \
- ((struct ath_desc *)((caddr_t)(_sc)->rx.rxdma.dd_desc + \
- ((_pa) - (_sc)->rx.rxdma.dd_desc_paddr)))
+ struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype];
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct sk_buff *skb;
+ struct ath_buf *bf;
+ int ret;
+
+ skb = skb_peek(&rx_edma->rx_fifo);
+ if (!skb)
+ return false;
+
+ bf = SKB_CB_ATHBUF(skb);
+ BUG_ON(!bf);
+
+ dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize, DMA_FROM_DEVICE);
+
+ ret = ath9k_hw_process_rxdesc_edma(ah, NULL, skb->data);
+ if (ret == -EINPROGRESS) {
+ /*let device gain the buffer again*/
+ dma_sync_single_for_device(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize, DMA_FROM_DEVICE);
+ return false;
+ }
+ __skb_unlink(skb, &rx_edma->rx_fifo);
+ if (ret == -EINVAL) {
+ /* corrupt descriptor, skip this one and the following one */
+ list_add_tail(&bf->list, &sc->rx.rxbuf);
+ ath_rx_edma_buf_link(sc, qtype);
+ skb = skb_peek(&rx_edma->rx_fifo);
+ if (!skb)
+ return true;
+
+ bf = SKB_CB_ATHBUF(skb);
+ BUG_ON(!bf);
+
+ __skb_unlink(skb, &rx_edma->rx_fifo);
+ list_add_tail(&bf->list, &sc->rx.rxbuf);
+ ath_rx_edma_buf_link(sc, qtype);
+ return true;
+ }
+ skb_queue_tail(&rx_edma->rx_buffers, skb);
+
+ return true;
+}
+
+static struct ath_buf *ath_edma_get_next_rx_buf(struct ath_softc *sc,
+ struct ath_rx_status *rs,
+ enum ath9k_rx_qtype qtype)
+{
+ struct ath_rx_edma *rx_edma = &sc->rx.rx_edma[qtype];
+ struct sk_buff *skb;
struct ath_buf *bf;
+
+ while (ath_edma_get_buffers(sc, qtype));
+ skb = __skb_dequeue(&rx_edma->rx_buffers);
+ if (!skb)
+ return NULL;
+
+ bf = SKB_CB_ATHBUF(skb);
+ ath9k_hw_process_rxdesc_edma(sc->sc_ah, rs, skb->data);
+ return bf;
+}
+
+static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc,
+ struct ath_rx_status *rs)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
struct ath_desc *ds;
+ struct ath_buf *bf;
+ int ret;
+
+ if (list_empty(&sc->rx.rxbuf)) {
+ sc->rx.rxlink = NULL;
+ return NULL;
+ }
+
+ bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
+ ds = bf->bf_desc;
+
+ /*
+ * Must provide the virtual address of the current
+ * descriptor, the physical address, and the virtual
+ * address of the next descriptor in the h/w chain.
+ * This allows the HAL to look ahead to see if the
+ * hardware is done with a descriptor by checking the
+ * done bit in the following descriptor and the address
+ * of the current descriptor the DMA engine is working
+ * on. All this is necessary because of our use of
+ * a self-linked list to avoid rx overruns.
+ */
+ ret = ath9k_hw_rxprocdesc(ah, ds, rs, 0);
+ if (ret == -EINPROGRESS) {
+ struct ath_rx_status trs;
+ struct ath_buf *tbf;
+ struct ath_desc *tds;
+
+ memset(&trs, 0, sizeof(trs));
+ if (list_is_last(&bf->list, &sc->rx.rxbuf)) {
+ sc->rx.rxlink = NULL;
+ return NULL;
+ }
+
+ tbf = list_entry(bf->list.next, struct ath_buf, list);
+
+ /*
+ * On some hardware the descriptor status words could
+ * get corrupted, including the done bit. Because of
+ * this, check if the next descriptor's done bit is
+ * set or not.
+ *
+ * If the next descriptor's done bit is set, the current
+ * descriptor has been corrupted. Force s/w to discard
+ * this descriptor and continue...
+ */
+
+ tds = tbf->bf_desc;
+ ret = ath9k_hw_rxprocdesc(ah, tds, &trs, 0);
+ if (ret == -EINPROGRESS)
+ return NULL;
+ }
+
+ if (!bf->bf_mpdu)
+ return bf;
+
+ /*
+ * Synchronize the DMA transfer with CPU before
+ * 1. accessing the frame
+ * 2. requeueing the same buffer to h/w
+ */
+ dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
+ common->rx_bufsize,
+ DMA_FROM_DEVICE);
+
+ return bf;
+}
+
+/* Assumes you've already done the endian to CPU conversion */
+static bool ath9k_rx_accept(struct ath_common *common,
+ struct ieee80211_hdr *hdr,
+ struct ieee80211_rx_status *rxs,
+ struct ath_rx_status *rx_stats,
+ bool *decrypt_error)
+{
+#define is_mc_or_valid_tkip_keyix ((is_mc || \
+ (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
+ test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
+
+ struct ath_hw *ah = common->ah;
+ __le16 fc;
+ u8 rx_status_len = ah->caps.rx_status_len;
+
+ fc = hdr->frame_control;
+
+ if (!rx_stats->rs_datalen)
+ return false;
+ /*
+ * rs_status follows rs_datalen so if rs_datalen is too large
+ * we can take a hint that hardware corrupted it, so ignore
+ * those frames.
+ */
+ if (rx_stats->rs_datalen > (common->rx_bufsize - rx_status_len))
+ return false;
+
+ /*
+ * rs_more indicates chained descriptors which can be used
+ * to link buffers together for a sort of scatter-gather
+ * operation.
+ * reject the frame, we don't support scatter-gather yet and
+ * the frame is probably corrupt anyway
+ */
+ if (rx_stats->rs_more)
+ return false;
+
+ /*
+ * The rx_stats->rs_status will not be set until the end of the
+ * chained descriptors so it can be ignored if rs_more is set. The
+ * rs_more will be false at the last element of the chained
+ * descriptors.
+ */
+ if (rx_stats->rs_status != 0) {
+ if (rx_stats->rs_status & ATH9K_RXERR_CRC)
+ rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+ if (rx_stats->rs_status & ATH9K_RXERR_PHY)
+ return false;
+
+ if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
+ *decrypt_error = true;
+ } else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+ bool is_mc;
+ /*
+ * The MIC error bit is only valid if the frame
+ * is not a control frame or fragment, and it was
+ * decrypted using a valid TKIP key.
+ */
+ is_mc = !!is_multicast_ether_addr(hdr->addr1);
+
+ if (!ieee80211_is_ctl(fc) &&
+ !ieee80211_has_morefrags(fc) &&
+ !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
+ is_mc_or_valid_tkip_keyix)
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
+ else
+ rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
+ }
+ /*
+ * Reject error frames with the exception of
+ * decryption and MIC failures. For monitor mode,
+ * we also ignore the CRC error.
+ */
+ if (ah->is_monitoring) {
+ if (rx_stats->rs_status &
+ ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+ ATH9K_RXERR_CRC))
+ return false;
+ } else {
+ if (rx_stats->rs_status &
+ ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
+ return false;
+ }
+ }
+ }
+ return true;
+}
+
+static int ath9k_process_rate(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rxs)
+{
+ struct ieee80211_supported_band *sband;
+ enum ieee80211_band band;
+ unsigned int i = 0;
+
+ band = hw->conf.channel->band;
+ sband = hw->wiphy->bands[band];
+
+ if (rx_stats->rs_rate & 0x80) {
+ /* HT rate */
+ rxs->flag |= RX_FLAG_HT;
+ if (rx_stats->rs_flags & ATH9K_RX_2040)
+ rxs->flag |= RX_FLAG_40MHZ;
+ if (rx_stats->rs_flags & ATH9K_RX_GI)
+ rxs->flag |= RX_FLAG_SHORT_GI;
+ rxs->rate_idx = rx_stats->rs_rate & 0x7f;
+ return 0;
+ }
+
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (sband->bitrates[i].hw_value == rx_stats->rs_rate) {
+ rxs->rate_idx = i;
+ return 0;
+ }
+ if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
+ rxs->flag |= RX_FLAG_SHORTPRE;
+ rxs->rate_idx = i;
+ return 0;
+ }
+ }
+
+ /*
+ * No valid hardware bitrate found -- we should not get here
+ * because hardware has already validated this frame as OK.
+ */
+ ath_dbg(common, ATH_DBG_XMIT,
+ "unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
+ rx_stats->rs_rate);
+
+ return -EINVAL;
+}
+
+static void ath9k_process_rssi(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct ieee80211_hdr *hdr,
+ struct ath_rx_status *rx_stats)
+{
+ struct ath_wiphy *aphy = hw->priv;
+ struct ath_hw *ah = common->ah;
+ int last_rssi;
+ __le16 fc;
+
+ if (ah->opmode != NL80211_IFTYPE_STATION)
+ return;
+
+ fc = hdr->frame_control;
+ if (!ieee80211_is_beacon(fc) ||
+ compare_ether_addr(hdr->addr3, common->curbssid))
+ return;
+
+ if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr)
+ ATH_RSSI_LPF(aphy->last_rssi, rx_stats->rs_rssi);
+
+ last_rssi = aphy->last_rssi;
+ if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+ rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
+ ATH_RSSI_EP_MULTIPLIER);
+ if (rx_stats->rs_rssi < 0)
+ rx_stats->rs_rssi = 0;
+
+ /* Update Beacon RSSI, this is used by ANI. */
+ ah->stats.avgbrssi = rx_stats->rs_rssi;
+}
+
+/*
+ * For Decrypt or Demic errors, we only mark packet status here and always push
+ * up the frame up to let mac80211 handle the actual error case, be it no
+ * decryption key or real decryption error. This let us keep statistics there.
+ */
+static int ath9k_rx_skb_preprocess(struct ath_common *common,
+ struct ieee80211_hw *hw,
+ struct ieee80211_hdr *hdr,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rx_status,
+ bool *decrypt_error)
+{
+ memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+
+ /*
+ * everything but the rate is checked here, the rate check is done
+ * separately to avoid doing two lookups for a rate for each frame.
+ */
+ if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
+ return -EINVAL;
+
+ ath9k_process_rssi(common, hw, hdr, rx_stats);
+
+ if (ath9k_process_rate(common, hw, rx_stats, rx_status))
+ return -EINVAL;
+
+ rx_status->band = hw->conf.channel->band;
+ rx_status->freq = hw->conf.channel->center_freq;
+ rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
+ rx_status->antenna = rx_stats->rs_antenna;
+ rx_status->flag |= RX_FLAG_TSFT;
+
+ return 0;
+}
+
+static void ath9k_rx_skb_postprocess(struct ath_common *common,
+ struct sk_buff *skb,
+ struct ath_rx_status *rx_stats,
+ struct ieee80211_rx_status *rxs,
+ bool decrypt_error)
+{
+ struct ath_hw *ah = common->ah;
+ struct ieee80211_hdr *hdr;
+ int hdrlen, padpos, padsize;
+ u8 keyix;
+ __le16 fc;
+
+ /* see if any padding is done by the hw and remove it */
+ hdr = (struct ieee80211_hdr *) skb->data;
+ hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ fc = hdr->frame_control;
+ padpos = ath9k_cmn_padpos(hdr->frame_control);
+
+ /* The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = (4 - padpos % 4) % 4; However, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. In addition, we must
+ * not try to remove padding from short control frames that do
+ * not have payload. */
+ padsize = padpos & 3;
+ if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
+ memmove(skb->data + padsize, skb->data, padpos);
+ skb_pull(skb, padsize);
+ }
+
+ keyix = rx_stats->rs_keyix;
+
+ if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error &&
+ ieee80211_has_protected(fc)) {
+ rxs->flag |= RX_FLAG_DECRYPTED;
+ } else if (ieee80211_has_protected(fc)
+ && !decrypt_error && skb->len >= hdrlen + 4) {
+ keyix = skb->data[hdrlen + 3] >> 6;
+
+ if (test_bit(keyix, common->keymap))
+ rxs->flag |= RX_FLAG_DECRYPTED;
+ }
+ if (ah->sw_mgmt_crypto &&
+ (rxs->flag & RX_FLAG_DECRYPTED) &&
+ ieee80211_is_mgmt(fc))
+ /* Use software decrypt for management frames. */
+ rxs->flag &= ~RX_FLAG_DECRYPTED;
+}
+
+static void ath_lnaconf_alt_good_scan(struct ath_ant_comb *antcomb,
+ struct ath_hw_antcomb_conf ant_conf,
+ int main_rssi_avg)
+{
+ antcomb->quick_scan_cnt = 0;
+
+ if (ant_conf.main_lna_conf == ATH_ANT_DIV_COMB_LNA2)
+ antcomb->rssi_lna2 = main_rssi_avg;
+ else if (ant_conf.main_lna_conf == ATH_ANT_DIV_COMB_LNA1)
+ antcomb->rssi_lna1 = main_rssi_avg;
+
+ switch ((ant_conf.main_lna_conf << 4) | ant_conf.alt_lna_conf) {
+ case (0x10): /* LNA2 A-B */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ antcomb->second_quick_scan_conf = ATH_ANT_DIV_COMB_LNA1;
+ break;
+ case (0x20): /* LNA1 A-B */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ antcomb->second_quick_scan_conf = ATH_ANT_DIV_COMB_LNA2;
+ break;
+ case (0x21): /* LNA1 LNA2 */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA2;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->second_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ break;
+ case (0x12): /* LNA2 LNA1 */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA1;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->second_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ break;
+ case (0x13): /* LNA2 A+B */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->second_quick_scan_conf = ATH_ANT_DIV_COMB_LNA1;
+ break;
+ case (0x23): /* LNA1 A+B */
+ antcomb->main_conf = ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ antcomb->first_quick_scan_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ antcomb->second_quick_scan_conf = ATH_ANT_DIV_COMB_LNA2;
+ break;
+ default:
+ break;
+ }
+}
+
+static void ath_select_ant_div_from_quick_scan(struct ath_ant_comb *antcomb,
+ struct ath_hw_antcomb_conf *div_ant_conf,
+ int main_rssi_avg, int alt_rssi_avg,
+ int alt_ratio)
+{
+ /* alt_good */
+ switch (antcomb->quick_scan_cnt) {
+ case 0:
+ /* set alt to main, and alt to first conf */
+ div_ant_conf->main_lna_conf = antcomb->main_conf;
+ div_ant_conf->alt_lna_conf = antcomb->first_quick_scan_conf;
+ break;
+ case 1:
+ /* set alt to main, and alt to first conf */
+ div_ant_conf->main_lna_conf = antcomb->main_conf;
+ div_ant_conf->alt_lna_conf = antcomb->second_quick_scan_conf;
+ antcomb->rssi_first = main_rssi_avg;
+ antcomb->rssi_second = alt_rssi_avg;
+
+ if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA1) {
+ /* main is LNA1 */
+ if (ath_is_alt_ant_ratio_better(alt_ratio,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_HI,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_LOW,
+ main_rssi_avg, alt_rssi_avg,
+ antcomb->total_pkt_count))
+ antcomb->first_ratio = true;
+ else
+ antcomb->first_ratio = false;
+ } else if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA2) {
+ if (ath_is_alt_ant_ratio_better(alt_ratio,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_MID,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_LOW,
+ main_rssi_avg, alt_rssi_avg,
+ antcomb->total_pkt_count))
+ antcomb->first_ratio = true;
+ else
+ antcomb->first_ratio = false;
+ } else {
+ if ((((alt_ratio >= ATH_ANT_DIV_COMB_ALT_ANT_RATIO2) &&
+ (alt_rssi_avg > main_rssi_avg +
+ ATH_ANT_DIV_COMB_LNA1_DELTA_HI)) ||
+ (alt_rssi_avg > main_rssi_avg)) &&
+ (antcomb->total_pkt_count > 50))
+ antcomb->first_ratio = true;
+ else
+ antcomb->first_ratio = false;
+ }
+ break;
+ case 2:
+ antcomb->alt_good = false;
+ antcomb->scan_not_start = false;
+ antcomb->scan = false;
+ antcomb->rssi_first = main_rssi_avg;
+ antcomb->rssi_third = alt_rssi_avg;
+
+ if (antcomb->second_quick_scan_conf == ATH_ANT_DIV_COMB_LNA1)
+ antcomb->rssi_lna1 = alt_rssi_avg;
+ else if (antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ antcomb->rssi_lna2 = alt_rssi_avg;
+ else if (antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2) {
+ if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA2)
+ antcomb->rssi_lna2 = main_rssi_avg;
+ else if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA1)
+ antcomb->rssi_lna1 = main_rssi_avg;
+ }
+
+ if (antcomb->rssi_lna2 > antcomb->rssi_lna1 +
+ ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA)
+ div_ant_conf->main_lna_conf = ATH_ANT_DIV_COMB_LNA2;
+ else
+ div_ant_conf->main_lna_conf = ATH_ANT_DIV_COMB_LNA1;
+
+ if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA1) {
+ if (ath_is_alt_ant_ratio_better(alt_ratio,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_HI,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_LOW,
+ main_rssi_avg, alt_rssi_avg,
+ antcomb->total_pkt_count))
+ antcomb->second_ratio = true;
+ else
+ antcomb->second_ratio = false;
+ } else if (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA2) {
+ if (ath_is_alt_ant_ratio_better(alt_ratio,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_MID,
+ ATH_ANT_DIV_COMB_LNA1_DELTA_LOW,
+ main_rssi_avg, alt_rssi_avg,
+ antcomb->total_pkt_count))
+ antcomb->second_ratio = true;
+ else
+ antcomb->second_ratio = false;
+ } else {
+ if ((((alt_ratio >= ATH_ANT_DIV_COMB_ALT_ANT_RATIO2) &&
+ (alt_rssi_avg > main_rssi_avg +
+ ATH_ANT_DIV_COMB_LNA1_DELTA_HI)) ||
+ (alt_rssi_avg > main_rssi_avg)) &&
+ (antcomb->total_pkt_count > 50))
+ antcomb->second_ratio = true;
+ else
+ antcomb->second_ratio = false;
+ }
+
+ /* set alt to the conf with maximun ratio */
+ if (antcomb->first_ratio && antcomb->second_ratio) {
+ if (antcomb->rssi_second > antcomb->rssi_third) {
+ /* first alt*/
+ if ((antcomb->first_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA1) ||
+ (antcomb->first_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA2))
+ /* Set alt LNA1 or LNA2*/
+ if (div_ant_conf->main_lna_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ else
+ /* Set alt to A+B or A-B */
+ div_ant_conf->alt_lna_conf =
+ antcomb->first_quick_scan_conf;
+ } else if ((antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA1) ||
+ (antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA2)) {
+ /* Set alt LNA1 or LNA2 */
+ if (div_ant_conf->main_lna_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ } else {
+ /* Set alt to A+B or A-B */
+ div_ant_conf->alt_lna_conf =
+ antcomb->second_quick_scan_conf;
+ }
+ } else if (antcomb->first_ratio) {
+ /* first alt */
+ if ((antcomb->first_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA1) ||
+ (antcomb->first_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA2))
+ /* Set alt LNA1 or LNA2 */
+ if (div_ant_conf->main_lna_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ else
+ /* Set alt to A+B or A-B */
+ div_ant_conf->alt_lna_conf =
+ antcomb->first_quick_scan_conf;
+ } else if (antcomb->second_ratio) {
+ /* second alt */
+ if ((antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA1) ||
+ (antcomb->second_quick_scan_conf ==
+ ATH_ANT_DIV_COMB_LNA2))
+ /* Set alt LNA1 or LNA2 */
+ if (div_ant_conf->main_lna_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ else
+ /* Set alt to A+B or A-B */
+ div_ant_conf->alt_lna_conf =
+ antcomb->second_quick_scan_conf;
+ } else {
+ /* main is largest */
+ if ((antcomb->main_conf == ATH_ANT_DIV_COMB_LNA1) ||
+ (antcomb->main_conf == ATH_ANT_DIV_COMB_LNA2))
+ /* Set alt LNA1 or LNA2 */
+ if (div_ant_conf->main_lna_conf ==
+ ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else
+ div_ant_conf->alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ else
+ /* Set alt to A+B or A-B */
+ div_ant_conf->alt_lna_conf = antcomb->main_conf;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf)
+{
+ /* Adjust the fast_div_bias based on main and alt lna conf */
+ switch ((ant_conf->main_lna_conf << 4) | ant_conf->alt_lna_conf) {
+ case (0x01): /* A-B LNA2 */
+ ant_conf->fast_div_bias = 0x3b;
+ break;
+ case (0x02): /* A-B LNA1 */
+ ant_conf->fast_div_bias = 0x3d;
+ break;
+ case (0x03): /* A-B A+B */
+ ant_conf->fast_div_bias = 0x1;
+ break;
+ case (0x10): /* LNA2 A-B */
+ ant_conf->fast_div_bias = 0x7;
+ break;
+ case (0x12): /* LNA2 LNA1 */
+ ant_conf->fast_div_bias = 0x2;
+ break;
+ case (0x13): /* LNA2 A+B */
+ ant_conf->fast_div_bias = 0x7;
+ break;
+ case (0x20): /* LNA1 A-B */
+ ant_conf->fast_div_bias = 0x6;
+ break;
+ case (0x21): /* LNA1 LNA2 */
+ ant_conf->fast_div_bias = 0x0;
+ break;
+ case (0x23): /* LNA1 A+B */
+ ant_conf->fast_div_bias = 0x6;
+ break;
+ case (0x30): /* A+B A-B */
+ ant_conf->fast_div_bias = 0x1;
+ break;
+ case (0x31): /* A+B LNA2 */
+ ant_conf->fast_div_bias = 0x3b;
+ break;
+ case (0x32): /* A+B LNA1 */
+ ant_conf->fast_div_bias = 0x3d;
+ break;
+ default:
+ break;
+ }
+}
+
+/* Antenna diversity and combining */
+static void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs)
+{
+ struct ath_hw_antcomb_conf div_ant_conf;
+ struct ath_ant_comb *antcomb = &sc->ant_comb;
+ int alt_ratio = 0, alt_rssi_avg = 0, main_rssi_avg = 0, curr_alt_set;
+ int curr_main_set, curr_bias;
+ int main_rssi = rs->rs_rssi_ctl0;
+ int alt_rssi = rs->rs_rssi_ctl1;
+ int rx_ant_conf, main_ant_conf;
+ bool short_scan = false;
+
+ rx_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_CURRENT_SHIFT) &
+ ATH_ANT_RX_MASK;
+ main_ant_conf = (rs->rs_rssi_ctl2 >> ATH_ANT_RX_MAIN_SHIFT) &
+ ATH_ANT_RX_MASK;
+
+ /* Record packet only when alt_rssi is positive */
+ if (alt_rssi > 0) {
+ antcomb->total_pkt_count++;
+ antcomb->main_total_rssi += main_rssi;
+ antcomb->alt_total_rssi += alt_rssi;
+ if (main_ant_conf == rx_ant_conf)
+ antcomb->main_recv_cnt++;
+ else
+ antcomb->alt_recv_cnt++;
+ }
+
+ /* Short scan check */
+ if (antcomb->scan && antcomb->alt_good) {
+ if (time_after(jiffies, antcomb->scan_start_time +
+ msecs_to_jiffies(ATH_ANT_DIV_COMB_SHORT_SCAN_INTR)))
+ short_scan = true;
+ else
+ if (antcomb->total_pkt_count ==
+ ATH_ANT_DIV_COMB_SHORT_SCAN_PKTCOUNT) {
+ alt_ratio = ((antcomb->alt_recv_cnt * 100) /
+ antcomb->total_pkt_count);
+ if (alt_ratio < ATH_ANT_DIV_COMB_ALT_ANT_RATIO)
+ short_scan = true;
+ }
+ }
+
+ if (((antcomb->total_pkt_count < ATH_ANT_DIV_COMB_MAX_PKTCOUNT) ||
+ rs->rs_moreaggr) && !short_scan)
+ return;
+
+ if (antcomb->total_pkt_count) {
+ alt_ratio = ((antcomb->alt_recv_cnt * 100) /
+ antcomb->total_pkt_count);
+ main_rssi_avg = (antcomb->main_total_rssi /
+ antcomb->total_pkt_count);
+ alt_rssi_avg = (antcomb->alt_total_rssi /
+ antcomb->total_pkt_count);
+ }
+
+
+ ath9k_hw_antdiv_comb_conf_get(sc->sc_ah, &div_ant_conf);
+ curr_alt_set = div_ant_conf.alt_lna_conf;
+ curr_main_set = div_ant_conf.main_lna_conf;
+ curr_bias = div_ant_conf.fast_div_bias;
+
+ antcomb->count++;
+
+ if (antcomb->count == ATH_ANT_DIV_COMB_MAX_COUNT) {
+ if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) {
+ ath_lnaconf_alt_good_scan(antcomb, div_ant_conf,
+ main_rssi_avg);
+ antcomb->alt_good = true;
+ } else {
+ antcomb->alt_good = false;
+ }
+
+ antcomb->count = 0;
+ antcomb->scan = true;
+ antcomb->scan_not_start = true;
+ }
+
+ if (!antcomb->scan) {
+ if (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO) {
+ if (curr_alt_set == ATH_ANT_DIV_COMB_LNA2) {
+ /* Switch main and alt LNA */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ } else if (curr_alt_set == ATH_ANT_DIV_COMB_LNA1) {
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ }
+
+ goto div_comb_done;
+ } else if ((curr_alt_set != ATH_ANT_DIV_COMB_LNA1) &&
+ (curr_alt_set != ATH_ANT_DIV_COMB_LNA2)) {
+ /* Set alt to another LNA */
+ if (curr_main_set == ATH_ANT_DIV_COMB_LNA2)
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ else if (curr_main_set == ATH_ANT_DIV_COMB_LNA1)
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+
+ goto div_comb_done;
+ }
+
+ if ((alt_rssi_avg < (main_rssi_avg +
+ ATH_ANT_DIV_COMB_LNA1_LNA2_DELTA)))
+ goto div_comb_done;
+ }
+
+ if (!antcomb->scan_not_start) {
+ switch (curr_alt_set) {
+ case ATH_ANT_DIV_COMB_LNA2:
+ antcomb->rssi_lna2 = alt_rssi_avg;
+ antcomb->rssi_lna1 = main_rssi_avg;
+ antcomb->scan = true;
+ /* set to A+B */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ break;
+ case ATH_ANT_DIV_COMB_LNA1:
+ antcomb->rssi_lna1 = alt_rssi_avg;
+ antcomb->rssi_lna2 = main_rssi_avg;
+ antcomb->scan = true;
+ /* set to A+B */
+ div_ant_conf.main_lna_conf = ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ break;
+ case ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2:
+ antcomb->rssi_add = alt_rssi_avg;
+ antcomb->scan = true;
+ /* set to A-B */
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ break;
+ case ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2:
+ antcomb->rssi_sub = alt_rssi_avg;
+ antcomb->scan = false;
+ if (antcomb->rssi_lna2 >
+ (antcomb->rssi_lna1 +
+ ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA)) {
+ /* use LNA2 as main LNA */
+ if ((antcomb->rssi_add > antcomb->rssi_lna1) &&
+ (antcomb->rssi_add > antcomb->rssi_sub)) {
+ /* set to A+B */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ } else if (antcomb->rssi_sub >
+ antcomb->rssi_lna1) {
+ /* set to A-B */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ } else {
+ /* set to LNA1 */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ }
+ } else {
+ /* use LNA1 as main LNA */
+ if ((antcomb->rssi_add > antcomb->rssi_lna2) &&
+ (antcomb->rssi_add > antcomb->rssi_sub)) {
+ /* set to A+B */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2;
+ } else if (antcomb->rssi_sub >
+ antcomb->rssi_lna1) {
+ /* set to A-B */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2;
+ } else {
+ /* set to LNA2 */
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ if (!antcomb->alt_good) {
+ antcomb->scan_not_start = false;
+ /* Set alt to another LNA */
+ if (curr_main_set == ATH_ANT_DIV_COMB_LNA2) {
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ } else if (curr_main_set == ATH_ANT_DIV_COMB_LNA1) {
+ div_ant_conf.main_lna_conf =
+ ATH_ANT_DIV_COMB_LNA1;
+ div_ant_conf.alt_lna_conf =
+ ATH_ANT_DIV_COMB_LNA2;
+ }
+ goto div_comb_done;
+ }
+ }
+
+ ath_select_ant_div_from_quick_scan(antcomb, &div_ant_conf,
+ main_rssi_avg, alt_rssi_avg,
+ alt_ratio);
+
+ antcomb->quick_scan_cnt++;
+
+div_comb_done:
+ ath_ant_div_conf_fast_divbias(&div_ant_conf);
+
+ ath9k_hw_antdiv_comb_conf_set(sc->sc_ah, &div_ant_conf);
+
+ antcomb->scan_start_time = jiffies;
+ antcomb->total_pkt_count = 0;
+ antcomb->main_total_rssi = 0;
+ antcomb->alt_total_rssi = 0;
+ antcomb->main_recv_cnt = 0;
+ antcomb->alt_recv_cnt = 0;
+}
+
+int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
+{
+ struct ath_buf *bf;
struct sk_buff *skb = NULL, *requeue_skb;
- struct ieee80211_rx_status rx_status;
+ struct ieee80211_rx_status *rxs;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
/*
- * The hw can techncically differ from common->hw when using ath9k
+ * The hw can technically differ from common->hw when using ath9k
* virtual wiphy so to account for that we iterate over the active
* wiphys and find the appropriate wiphy and therefore hw.
*/
struct ieee80211_hw *hw = NULL;
struct ieee80211_hdr *hdr;
- int hdrlen, padsize, retval;
+ int retval;
bool decrypt_error = false;
- u8 keyix;
- __le16 fc;
+ struct ath_rx_status rs;
+ enum ath9k_rx_qtype qtype;
+ bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
+ int dma_type;
+ u8 rx_status_len = ah->caps.rx_status_len;
+ u64 tsf = 0;
+ u32 tsf_lower = 0;
+ unsigned long flags;
+
+ if (edma)
+ dma_type = DMA_BIDIRECTIONAL;
+ else
+ dma_type = DMA_FROM_DEVICE;
+ qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP;
spin_lock_bh(&sc->rx.rxbuflock);
+ tsf = ath9k_hw_gettsf64(ah);
+ tsf_lower = tsf & 0xffffffff;
+
do {
/* If handling rx interrupt and flush is in progress => exit */
if ((sc->sc_flags & SC_OP_RXFLUSH) && (flush == 0))
break;
- if (list_empty(&sc->rx.rxbuf)) {
- sc->rx.rxlink = NULL;
- break;
- }
-
- bf = list_first_entry(&sc->rx.rxbuf, struct ath_buf, list);
- ds = bf->bf_desc;
+ memset(&rs, 0, sizeof(rs));
+ if (edma)
+ bf = ath_edma_get_next_rx_buf(sc, &rs, qtype);
+ else
+ bf = ath_get_next_rx_buf(sc, &rs);
- /*
- * Must provide the virtual address of the current
- * descriptor, the physical address, and the virtual
- * address of the next descriptor in the h/w chain.
- * This allows the HAL to look ahead to see if the
- * hardware is done with a descriptor by checking the
- * done bit in the following descriptor and the address
- * of the current descriptor the DMA engine is working
- * on. All this is necessary because of our use of
- * a self-linked list to avoid rx overruns.
- */
- retval = ath9k_hw_rxprocdesc(ah, ds,
- bf->bf_daddr,
- PA2DESC(sc, ds->ds_link),
- 0);
- if (retval == -EINPROGRESS) {
- struct ath_buf *tbf;
- struct ath_desc *tds;
-
- if (list_is_last(&bf->list, &sc->rx.rxbuf)) {
- sc->rx.rxlink = NULL;
- break;
- }
-
- tbf = list_entry(bf->list.next, struct ath_buf, list);
-
- /*
- * On some hardware the descriptor status words could
- * get corrupted, including the done bit. Because of
- * this, check if the next descriptor's done bit is
- * set or not.
- *
- * If the next descriptor's done bit is set, the current
- * descriptor has been corrupted. Force s/w to discard
- * this descriptor and continue...
- */
-
- tds = tbf->bf_desc;
- retval = ath9k_hw_rxprocdesc(ah, tds, tbf->bf_daddr,
- PA2DESC(sc, tds->ds_link), 0);
- if (retval == -EINPROGRESS) {
- break;
- }
- }
+ if (!bf)
+ break;
skb = bf->bf_mpdu;
if (!skb)
continue;
- /*
- * Synchronize the DMA transfer with CPU before
- * 1. accessing the frame
- * 2. requeueing the same buffer to h/w
- */
- dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
- sc->rx.bufsize,
- DMA_FROM_DEVICE);
+ hdr = (struct ieee80211_hdr *) (skb->data + rx_status_len);
+ rxs = IEEE80211_SKB_RXCB(skb);
- hdr = (struct ieee80211_hdr *) skb->data;
hw = ath_get_virt_hw(sc, hdr);
+ ath_debug_stat_rx(sc, &rs);
+
/*
* If we're asked to flush receive queue, directly
* chain it back at the queue without processing it.
if (flush)
goto requeue;
- if (!ds->ds_rxstat.rs_datalen)
+ retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs,
+ rxs, &decrypt_error);
+ if (retval)
goto requeue;
- /* The status portion of the descriptor could get corrupted. */
- if (sc->rx.bufsize < ds->ds_rxstat.rs_datalen)
- goto requeue;
+ rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
+ if (rs.rs_tstamp > tsf_lower &&
+ unlikely(rs.rs_tstamp - tsf_lower > 0x10000000))
+ rxs->mactime -= 0x100000000ULL;
- if (!ath_rx_prepare(hw, skb, ds,
- &rx_status, &decrypt_error, sc))
- goto requeue;
+ if (rs.rs_tstamp < tsf_lower &&
+ unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
+ rxs->mactime += 0x100000000ULL;
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
- requeue_skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_ATOMIC);
+ requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
/* If there is no memory we ignore the current RX'd frame,
* tell hardware it can give us a new frame using the old
/* Unmap the frame */
dma_unmap_single(sc->dev, bf->bf_buf_addr,
- sc->rx.bufsize,
- DMA_FROM_DEVICE);
-
- skb_put(skb, ds->ds_rxstat.rs_datalen);
-
- /* see if any padding is done by the hw and remove it */
- hdrlen = ieee80211_get_hdrlen_from_skb(skb);
- fc = hdr->frame_control;
-
- /* The MAC header is padded to have 32-bit boundary if the
- * packet payload is non-zero. The general calculation for
- * padsize would take into account odd header lengths:
- * padsize = (4 - hdrlen % 4) % 4; However, since only
- * even-length headers are used, padding can only be 0 or 2
- * bytes and we can optimize this a bit. In addition, we must
- * not try to remove padding from short control frames that do
- * not have payload. */
- padsize = hdrlen & 3;
- if (padsize && hdrlen >= 24) {
- memmove(skb->data + padsize, skb->data, hdrlen);
- skb_pull(skb, padsize);
- }
+ common->rx_bufsize,
+ dma_type);
- keyix = ds->ds_rxstat.rs_keyix;
+ skb_put(skb, rs.rs_datalen + ah->caps.rx_status_len);
+ if (ah->caps.rx_status_len)
+ skb_pull(skb, ah->caps.rx_status_len);
- if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
- rx_status.flag |= RX_FLAG_DECRYPTED;
- } else if (ieee80211_has_protected(fc)
- && !decrypt_error && skb->len >= hdrlen + 4) {
- keyix = skb->data[hdrlen + 3] >> 6;
-
- if (test_bit(keyix, sc->keymap))
- rx_status.flag |= RX_FLAG_DECRYPTED;
- }
- if (ah->sw_mgmt_crypto &&
- (rx_status.flag & RX_FLAG_DECRYPTED) &&
- ieee80211_is_mgmt(fc)) {
- /* Use software decrypt for management frames. */
- rx_status.flag &= ~RX_FLAG_DECRYPTED;
- }
+ ath9k_rx_skb_postprocess(common, skb, &rs,
+ rxs, decrypt_error);
/* We will now give hardware our shiny new allocated skb */
bf->bf_mpdu = requeue_skb;
bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
- sc->rx.bufsize,
- DMA_FROM_DEVICE);
+ common->rx_bufsize,
+ dma_type);
if (unlikely(dma_mapping_error(sc->dev,
bf->bf_buf_addr))) {
dev_kfree_skb_any(requeue_skb);
bf->bf_mpdu = NULL;
- ath_print(common, ATH_DBG_FATAL,
- "dma_mapping_error() on RX\n");
- ath_rx_send_to_mac80211(hw, sc, skb, &rx_status);
+ bf->bf_buf_addr = 0;
+ ath_err(common, "dma_mapping_error() on RX\n");
+ ath_rx_send_to_mac80211(hw, sc, skb);
break;
}
- bf->bf_dmacontext = bf->bf_buf_addr;
/*
* change the default rx antenna if rx diversity chooses the
* other antenna 3 times in a row.
*/
- if (sc->rx.defant != ds->ds_rxstat.rs_antenna) {
+ if (sc->rx.defant != rs.rs_antenna) {
if (++sc->rx.rxotherant >= 3)
- ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna);
+ ath_setdefantenna(sc, rs.rs_antenna);
} else {
sc->rx.rxotherant = 0;
}
- if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA)))
+ spin_lock_irqsave(&sc->sc_pm_lock, flags);
+
+ if ((sc->ps_flags & (PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA)) ||
+ unlikely(ath9k_check_auto_sleep(sc)))
ath_rx_ps(sc, skb);
+ spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)
+ ath_ant_comb_scan(sc, &rs);
- ath_rx_send_to_mac80211(hw, sc, skb, &rx_status);
+ ath_rx_send_to_mac80211(hw, sc, skb);
requeue:
- list_move_tail(&bf->list, &sc->rx.rxbuf);
- ath_rx_buf_link(sc, bf);
+ if (edma) {
+ list_add_tail(&bf->list, &sc->rx.rxbuf);
+ ath_rx_edma_buf_link(sc, qtype);
+ } else {
+ list_move_tail(&bf->list, &sc->rx.rxbuf);
+ ath_rx_buf_link(sc, bf);
+ }
} while (1);
spin_unlock_bh(&sc->rx.rxbuflock);
return 0;
-#undef PA2DESC
}