From: Tarun Kanti DebBarma Date: Mon, 30 Apr 2012 07:20:12 +0000 (+0530) Subject: gpio/omap: fix incorrect initialization of omap_gpio_mod_init X-Git-Url: http://git.alex.org.uk gpio/omap: fix incorrect initialization of omap_gpio_mod_init Initialization of irqenable, irqstatus registers is the common operation done in this function for all OMAP platforms, viz. OMAP1, OMAP2+. The latter _gpio_rmw()'s which supposedly got introduced wrongly to take care of OMAP2+ platforms were overwriting initially programmed OMAP1 value breaking functionality on OMAP1. Somehow incorrect assumption was made that each _gpio_rmw()'s were mutually exclusive. On close observation it is found that the first _gpio_rmw() which is supposedly done to take care of OMAP1 platform is generic enough and takes care of OMAP2+ platform as well. Therefore remove the latter _gpio_rmw() to irqenable as they are redundant now. Writing to ctrl and debounce_en registers for OMAP2+ platforms are modified to match the original(pre-cleanup) code where the registers are initialized with 0. In the cleanup series since we are using _gpio_rmw(reg, 0, 1), instead of __raw_writel(), we are just reading and writing the same values to ctrl and debounce_en. This is not an issue for debounce_en register because it has 0x0 as the default value. But in the case of ctrl register the default value is 0x2 (GATINGRATIO = 0x1) so that we end up writing 0x2 instead of intended 0 value. Therefore changing back to __raw_writel() as this is sufficient for this case besides simpler to understand. Also, change irqstatus initalization logic that avoids comparison with bool, besides making it fit in a single line. Cc: stable@vger.kernel.org Cc: Tony Lindgren Cc: Kevin Hilman Cc: Santosh Shilimkar Cc: Grant Likely Reported-by: Janusz Krzysztofik Tested-by: Janusz Krzysztofik Signed-off-by: Tarun Kanti DebBarma Signed-off-by: Kevin Hilman --- diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 1adc2ec..4461540 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -965,18 +965,15 @@ static void omap_gpio_mod_init(struct gpio_bank *bank) } _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv); - _gpio_rmw(base, bank->regs->irqstatus, l, - bank->regs->irqenable_inv == false); - _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0); - _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0); + _gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv); if (bank->regs->debounce_en) - _gpio_rmw(base, bank->regs->debounce_en, 0, 1); + __raw_writel(0, base + bank->regs->debounce_en); /* Save OE default value (0xffffffff) in the context */ bank->context.oe = __raw_readl(bank->base + bank->regs->direction); /* Initialize interface clk ungated, module enabled */ if (bank->regs->ctrl) - _gpio_rmw(base, bank->regs->ctrl, 0, 1); + __raw_writel(0, base + bank->regs->ctrl); } static __devinit void