#include <linux/videodev2.h>
#include <linux/i2c.h>
+#include <linux/workqueue.h>
#include <linux/mutex.h>
#include "pvrusb2-hdw.h"
#include "pvrusb2-io.h"
#include <media/cx2341x.h>
+#include "pvrusb2-devattr.h"
/* Legal values for PVR2_CID_HSM */
#define PVR2_CVAL_HSM_FAIL 0
#define FW1_STATE_RELOAD 3
#define FW1_STATE_OK 4
-/* Known major hardware variants, keyed from device ID */
-#define PVR2_HDW_TYPE_29XXX 0
-#define PVR2_HDW_TYPE_24XXX 1
-
typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16);
#define PVR2_I2C_FUNC_CNT 128
struct usb_device *usb_dev;
struct usb_interface *usb_intf;
- /* Device type, one of PVR2_HDW_TYPE_xxxxx */
- unsigned int hdw_type;
+ /* Device description, anything that must adjust behavior based on
+ device specific info will use information held here. */
+ const struct pvr2_device_desc *hdw_desc;
+
+ /* Kernel worker thread handling */
+ struct workqueue_struct *workqueue;
+ struct work_struct workpoll; /* Update driver state */
+ struct work_struct worki2csync; /* Update i2c clients */
+ struct work_struct workinit; /* Driver initialization sequence */
/* Video spigot */
struct pvr2_stream *vid_stream;
struct mutex big_lock_mutex;
int big_lock_held; /* For debugging */
- void (*poll_trigger_func)(void *);
- void *poll_trigger_data;
-
char name[32];
/* I2C stuff */
struct urb *ctl_read_urb;
unsigned char *ctl_write_buffer;
unsigned char *ctl_read_buffer;
- volatile int ctl_write_pend_flag;
- volatile int ctl_read_pend_flag;
- volatile int ctl_timeout_flag;
+ int ctl_write_pend_flag;
+ int ctl_read_pend_flag;
+ int ctl_timeout_flag;
struct completion ctl_done;
unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE];
int cmd_debug_state; // Low level command debugging info
unsigned int cmd_debug_write_len; //
unsigned int cmd_debug_read_len; //
+ /* Bits of state that describe what is going on with various parts
+ of the driver. */
+ int state_encoder_ok; /* Encoder is operational */
+ int state_encoder_run; /* Encoder is running */
+ int state_encoder_config; /* Encoder is configured */
+ int state_encoder_waitok; /* Encoder pre-wait done */
+ int state_decoder_run; /* Decoder is running */
+ int state_usbstream_run; /* FX2 is streaming */
+ int state_decoder_quiescent; /* Decoder idle for > 50msec */
+ int state_pipeline_config; /* Pipeline is configured */
+ int state_pipeline_req; /* Somebody wants to stream */
+ int state_pipeline_pause; /* Pipeline must be paused */
+ int state_pipeline_idle; /* Pipeline not running */
+
+ /* This is the master state of the driver. It is the combined
+ result of other bits of state. Examining this will indicate the
+ overall state of the driver. Values here are one of
+ PVR2_STATE_xxxx */
+ unsigned int master_state;
+
+ /* True if states must be re-evaluated */
+ int state_stale;
+
+ void (*state_func)(void *);
+ void *state_data;
+
+ /* Timer for measuring decoder settling time */
+ struct timer_list quiescent_timer;
+
+ /* Timer for measuring encoder pre-wait time */
+ struct timer_list encoder_wait_timer;
+
+ /* Place to block while waiting for state changes */
+ wait_queue_head_t state_wait_data;
+
+
int flag_ok; /* device in known good state */
int flag_disconnected; /* flag_ok == 0 due to disconnect */
int flag_init_ok; /* true if structure is fully initialized */
- int flag_streaming_enabled; /* true if streaming should be on */
int fw1_state; /* current situation with fw1 */
- int flag_encoder_ok; /* True if encoder is healthy */
-
- int flag_decoder_is_tuned;
+ int flag_decoder_missed;/* We've noticed missing decoder */
+ int flag_tripped; /* Indicates overall failure to start */
struct pvr2_decoder_ctrl *decoder_ctrl;
unsigned int fw_size;
int fw_cpu_flag; /* True if we are dealing with the CPU */
- // Which subsystem pieces have been enabled / configured
- unsigned long subsys_enabled_mask;
-
- // Which subsystems are manipulated to enable streaming
- unsigned long subsys_stream_mask;
-
// True if there is a request to trigger logging of state in each
// module.
int log_requested;
/* Location of eeprom or a negative number if none */
int eeprom_addr;
- enum pvr2_config config;
+ enum pvr2_config active_stream_type;
+ enum pvr2_config desired_stream_type;
/* Control state needed for cx2341x module */
struct cx2341x_mpeg_params enc_cur_state;
struct cx2341x_mpeg_params enc_ctl_state;
/* True if an encoder attribute has changed */
int enc_stale;
+ /* True if an unsafe encoder attribute has changed */
+ int enc_unsafe_stale;
/* True if enc_cur_state is valid */
int enc_cur_valid;
/* This function gets the current frequency */
unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *);
+void pvr2_hdw_set_decoder(struct pvr2_hdw *,struct pvr2_decoder_ctrl *);
#endif /* __PVRUSB2_HDW_INTERNAL_H */
projects / linux-flexiantxendom0-3.2.10.git / blobdiff