*
* Unsupported but docs exist:
* Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
- * Winbond W83759A
*
* This driver handles legacy (that is "ISA/VLB side") IDE ports found
* on PC class systems. There are three hybrid devices that are exceptions
* the MPIIX where the tuning is PCI side but the IDE is "ISA side".
*
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
- * opti82c465mv/promise 20230c/20630
+ * opti82c465mv/promise 20230c/20630/winbond83759A
*
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
* For now use autospeed and pio_mask as above with the W83759A. This may
* change.
*
- * TODO
- * Merge existing pata_qdi driver
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.5"
+#define DRV_VERSION "0.6.5"
#define NR_HOST 6
-static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
-static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
+static int all;
+module_param(all, int, 0444);
+MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
struct legacy_data {
unsigned long timing;
};
+enum controller {
+ BIOS = 0,
+ SNOOP = 1,
+ PDC20230 = 2,
+ HT6560A = 3,
+ HT6560B = 4,
+ OPTI611A = 5,
+ OPTI46X = 6,
+ QDI6500 = 7,
+ QDI6580 = 8,
+ QDI6580DP = 9, /* Dual channel mode is different */
+ W83759A = 10,
+
+ UNKNOWN = -1
+};
+
+
+struct legacy_probe {
+ unsigned char *name;
+ unsigned long port;
+ unsigned int irq;
+ unsigned int slot;
+ enum controller type;
+ unsigned long private;
+};
+
+struct legacy_controller {
+ const char *name;
+ struct ata_port_operations *ops;
+ unsigned int pio_mask;
+ unsigned int flags;
+ int (*setup)(struct platform_device *, struct legacy_probe *probe,
+ struct legacy_data *data);
+};
+
+static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+
+static struct legacy_probe probe_list[NR_HOST];
static struct legacy_data legacy_data[NR_HOST];
static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
-static int probe_all; /* Set to check all ISA port ranges */
-static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
-static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
-static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
-static int autospeed; /* Chip present which snoops speed changes */
-static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int probe_all; /* Set to check all ISA port ranges */
+static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
+static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
+static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
+static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
+static int qdi; /* Set to probe QDI controllers */
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+static int autospeed; /* Chip present which snoops speed changes */
+static int pio_mask = 0x1F; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
+ * legacy_probe_add - Add interface to probe list
+ * @port: Controller port
+ * @irq: IRQ number
+ * @type: Controller type
+ * @private: Controller specific info
+ *
+ * Add an entry into the probe list for ATA controllers. This is used
+ * to add the default ISA slots and then to build up the table
+ * further according to other ISA/VLB/Weird device scans
+ *
+ * An I/O port list is used to keep ordering stable and sane, as we
+ * don't have any good way to talk about ordering otherwise
+ */
+
+static int legacy_probe_add(unsigned long port, unsigned int irq,
+ enum controller type, unsigned long private)
+{
+ struct legacy_probe *lp = &probe_list[0];
+ int i;
+ struct legacy_probe *free = NULL;
+
+ for (i = 0; i < NR_HOST; i++) {
+ if (lp->port == 0 && free == NULL)
+ free = lp;
+ /* Matching port, or the correct slot for ordering */
+ if (lp->port == port || legacy_port[i] == port) {
+ free = lp;
+ break;
+ }
+ lp++;
+ }
+ if (free == NULL) {
+ printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
+ return -1;
+ }
+ /* Fill in the entry for later probing */
+ free->port = port;
+ free->irq = irq;
+ free->type = type;
+ free->private = private;
+ return 0;
+}
+
+
+/**
* legacy_set_mode - mode setting
* @link: IDE link
* @unused: Device that failed when error is returned
ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_printk(dev, KERN_INFO,
+ "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static struct ata_port_operations legacy_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Promise 20230C and 20620 support
*
- * This controller supports PIO0 to PIO2. We set PIO timings conservatively to
- * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
- * controller and PIO'd to the host and not supported.
+ * This controller supports PIO0 to PIO2. We set PIO timings
+ * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA
+ * support is weird being DMA to controller and PIO'd to the host
+ * and not supported.
*/
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
local_irq_save(flags);
/* Unlock the control interface */
- do
- {
+ do {
inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
inb(0x1F2);
inb(0x1F2);
inb(0x1F2);
}
- while((inb(0x1F2) & 0x80) && --tries);
+ while ((inb(0x1F2) & 0x80) && --tries);
local_irq_restore(flags);
}
-static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
- int slop = buflen & 3;
- unsigned long flags;
+ if (ata_id_has_dword_io(dev->id)) {
+ struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
+ unsigned long flags;
- if (ata_id_has_dword_io(adev->id)) {
local_irq_save(flags);
/* Perform the 32bit I/O synchronization sequence */
ioread8(ap->ioaddr.nsect_addr);
/* Now the data */
-
- if (write_data)
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
+ if (rw == READ)
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad = 0;
- if (write_data) {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- } else {
+ u32 pad;
+ if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
}
+ buflen += 4 - slop;
}
local_irq_restore(flags);
- }
- else
- ata_data_xfer_noirq(adev, buf, buflen, write_data);
+ } else
+ buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+
+ return buflen;
}
static struct ata_port_operations pdc20230_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Holtek 6560A support
*
- * This controller supports PIO0 to PIO2 (no IORDY even though higher timings
- * can be loaded).
+ * This controller supports PIO0 to PIO2 (no IORDY even though higher
+ * timings can be loaded).
*/
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Holtek 6560B support
*
- * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
- * unless we see an ATAPI device in which case we force it off.
+ * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO
+ * setting unless we see an ATAPI device in which case we force it off.
*
* FIXME: need to implement 2nd channel support.
*/
if (adev->class != ATA_DEV_ATA) {
u8 rconf = inb(0x3E6);
if (rconf & 0x24) {
- rconf &= ~ 0x24;
+ rconf &= ~0x24;
outb(rconf, 0x3E6);
}
}
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
+ .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* This controller supports PIO0 to PIO3.
*/
-static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void opti82c611a_set_piomode(struct ata_port *ap,
+ struct ata_device *adev)
{
u8 active, recover, setup;
struct ata_timing t;
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
+static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ ld_qdi->clock[adev->devno] = timing;
+
+ outb(timing, ld_qdi->timing);
+}
/**
- * legacy_init_one - attach a legacy interface
- * @port: port number
- * @io: I/O port start
- * @ctrl: control port
+ * qdi6580dp_set_piomode - PIO setup for dual channel
+ * @ap: Port
+ * @adev: Device
* @irq: interrupt line
*
- * Register an ISA bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
+ * In dual channel mode the 6580 has one clock per channel and we have
+ * to software clockswitch in qc_issue_prot.
*/
-static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
+static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- struct legacy_data *ld = &legacy_data[nr_legacy_host];
- struct ata_host *host;
- struct ata_port *ap;
- struct platform_device *pdev;
- struct ata_port_operations *ops = &legacy_port_ops;
- void __iomem *io_addr, *ctrl_addr;
- int pio_modes = pio_mask;
- u32 mask = (1 << port);
- u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
- int ret;
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
- pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
- ret = -EBUSY;
- if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
- devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL)
- goto fail;
+ ld_qdi->clock[adev->devno] = timing;
- ret = -ENOMEM;
- io_addr = devm_ioport_map(&pdev->dev, io, 8);
- ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1);
- if (!io_addr || !ctrl_addr)
- goto fail;
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, ld_qdi->timing + 3);
+}
- if (ht6560a & mask) {
- ops = &ht6560a_port_ops;
- pio_modes = 0x07;
- iordy = ATA_FLAG_NO_IORDY;
- }
- if (ht6560b & mask) {
- ops = &ht6560b_port_ops;
- pio_modes = 0x1F;
- }
- if (opti82c611a & mask) {
- ops = &opti82c611a_port_ops;
- pio_modes = 0x0F;
+/**
+ * qdi6580_set_piomode - PIO setup for single channel
+ * @ap: Port
+ * @adev: Device
+ *
+ * In single channel mode the 6580 has one clock per device and we can
+ * avoid the requirement to clock switch. We also have to load the timing
+ * into the right clock according to whether we are master or slave.
+ */
+
+static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
}
- if (opti82c46x & mask) {
- ops = &opti82c46x_port_ops;
- pio_modes = 0x0F;
+ timing = (recovery << 4) | active | 0x08;
+ ld_qdi->clock[adev->devno] = timing;
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, ld_qdi->timing + 3);
+}
+
+/**
+ * qdi_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings.
+ */
+
+static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+
+ if (ld_qdi->clock[adev->devno] != ld_qdi->last) {
+ if (adev->pio_mode) {
+ ld_qdi->last = ld_qdi->clock[adev->devno];
+ outb(ld_qdi->clock[adev->devno], ld_qdi->timing +
+ 2 * ap->port_no);
+ }
}
+ return ata_qc_issue_prot(qc);
+}
- /* Probe for automatically detectable controllers */
+static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_port *ap = adev->link->ap;
+ int slop = buflen & 3;
- if (io == 0x1F0 && ops == &legacy_port_ops) {
- unsigned long flags;
+ if (ata_id_has_dword_io(adev->id)) {
+ if (rw == WRITE)
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- local_irq_save(flags);
+ if (unlikely(slop)) {
+ u32 pad;
+ if (rw == WRITE) {
+ memcpy(&pad, buf + buflen - slop, slop);
+ pad = le32_to_cpu(pad);
+ iowrite32(pad, ap->ioaddr.data_addr);
+ } else {
+ pad = ioread32(ap->ioaddr.data_addr);
+ pad = cpu_to_le32(pad);
+ memcpy(buf + buflen - slop, &pad, slop);
+ }
+ }
+ return (buflen + 3) & ~3;
+ } else
+ return ata_data_xfer(adev, buf, buflen, rw);
+}
+
+static int qdi_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations qdi6500_port_ops = {
+ .set_piomode = qdi6500_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static struct ata_port_operations qdi6580_port_ops = {
+ .set_piomode = qdi6580_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static struct ata_port_operations qdi6580dp_port_ops = {
+ .set_piomode = qdi6580dp_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static DEFINE_SPINLOCK(winbond_lock);
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ outb(val, port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+ u8 val;
+
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ val = inb(port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+
+ return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_winbond = ap->host->private_data;
+ int active, recovery;
+ u8 reg;
+ int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+ reg = winbond_readcfg(ld_winbond->timing, 0x81);
+
+ /* Get the timing data in cycles */
+ if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+ else
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ active = (FIT(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ timing = (active << 4) | recovery;
+ winbond_writecfg(ld_winbond->timing, timing, reg);
+
+ /* Load the setup timing */
+
+ reg = 0x35;
+ if (adev->class != ATA_DEV_ATA)
+ reg |= 0x08; /* FIFO off */
+ if (!ata_pio_need_iordy(adev))
+ reg |= 0x02; /* IORDY off */
+ reg |= (FIT(t.setup, 0, 3) << 6);
+ winbond_writecfg(ld_winbond->timing, timing + 1, reg);
+}
+
+static int winbond_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations winbond_port_ops = {
+ .set_piomode = winbond_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .port_start = ata_sff_port_start,
+};
+
+static struct legacy_controller controllers[] = {
+ {"BIOS", &legacy_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"Snooping", &simple_port_ops, 0x1F,
+ 0 , NULL },
+ {"PDC20230", &pdc20230_port_ops, 0x7,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560A", &ht6560a_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560B", &ht6560b_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
+ 0 , NULL },
+ {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
+ 0 , NULL },
+ {"QDI6500", &qdi6500_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, qdi_port },
+ {"QDI6580", &qdi6580_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"W83759A", &winbond_port_ops, 0x1F,
+ 0 , winbond_port }
+};
+
+/**
+ * probe_chip_type - Discover controller
+ * @probe: Probe entry to check
+ *
+ * Probe an ATA port and identify the type of controller. We don't
+ * check if the controller appears to be driveless at this point.
+ */
+
+static __init int probe_chip_type(struct legacy_probe *probe)
+{
+ int mask = 1 << probe->slot;
+
+ if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) {
+ u8 reg = winbond_readcfg(winbond, 0x81);
+ reg |= 0x80; /* jumpered mode off */
+ winbond_writecfg(winbond, 0x81, reg);
+ reg = winbond_readcfg(winbond, 0x83);
+ reg |= 0xF0; /* local control */
+ winbond_writecfg(winbond, 0x83, reg);
+ reg = winbond_readcfg(winbond, 0x85);
+ reg |= 0xF0; /* programmable timing */
+ winbond_writecfg(winbond, 0x85, reg);
+
+ reg = winbond_readcfg(winbond, 0x81);
+
+ if (reg & mask)
+ return W83759A;
+ }
+ if (probe->port == 0x1F0) {
+ unsigned long flags;
+ local_irq_save(flags);
/* Probes */
- inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F5);
inb(0x1F2);
inb(0x3F6);
inb(0x3F6);
if ((inb(0x1F2) & 0x80) == 0) {
/* PDC20230c or 20630 ? */
- printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
- pio_modes = 0x07;
- ops = &pdc20230_port_ops;
- iordy = ATA_FLAG_NO_IORDY;
+ printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller"
+ " detected.\n");
udelay(100);
inb(0x1F5);
+ local_irq_restore(flags);
+ return PDC20230;
} else {
outb(0x55, 0x1F2);
inb(0x1F2);
inb(0x1F2);
- if (inb(0x1F2) == 0x00) {
- printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
- }
+ if (inb(0x1F2) == 0x00)
+ printk(KERN_INFO "PDC20230-B VLB ATA "
+ "controller detected.\n");
+ local_irq_restore(flags);
+ return BIOS;
}
local_irq_restore(flags);
}
+ if (ht6560a & mask)
+ return HT6560A;
+ if (ht6560b & mask)
+ return HT6560B;
+ if (opti82c611a & mask)
+ return OPTI611A;
+ if (opti82c46x & mask)
+ return OPTI46X;
+ if (autospeed & mask)
+ return SNOOP;
+ return BIOS;
+}
+
+
+/**
+ * legacy_init_one - attach a legacy interface
+ * @pl: probe record
+ *
+ * Register an ISA bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int legacy_init_one(struct legacy_probe *probe)
+{
+ struct legacy_controller *controller = &controllers[probe->type];
+ int pio_modes = controller->pio_mask;
+ unsigned long io = probe->port;
+ u32 mask = (1 << probe->slot);
+ struct ata_port_operations *ops = controller->ops;
+ struct legacy_data *ld = &legacy_data[probe->slot];
+ struct ata_host *host = NULL;
+ struct ata_port *ap;
+ struct platform_device *pdev;
+ struct ata_device *dev;
+ void __iomem *io_addr, *ctrl_addr;
+ u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
+ int ret;
- /* Chip does mode setting by command snooping */
- if (ops == &legacy_port_ops && (autospeed & mask))
- ops = &simple_port_ops;
+ iordy |= controller->flags;
+
+ pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ ret = -EBUSY;
+ if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
+ devm_request_region(&pdev->dev, io + 0x0206, 1,
+ "pata_legacy") == NULL)
+ goto fail;
ret = -ENOMEM;
+ io_addr = devm_ioport_map(&pdev->dev, io, 8);
+ ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
+ if (!io_addr || !ctrl_addr)
+ goto fail;
+ if (controller->setup)
+ if (controller->setup(pdev, probe, ld) < 0)
+ goto fail;
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
goto fail;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
ata_std_ports(&ap->ioaddr);
- ap->private_data = ld;
+ ap->host->private_data = ld;
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
- ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+ ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
+ &legacy_sht);
if (ret)
goto fail;
-
- legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
ld->platform_dev = pdev;
- return 0;
+ /* Nothing found means we drop the port as its probably not there */
+
+ ret = -ENODEV;
+ ata_link_for_each_dev(dev, &ap->link) {
+ if (!ata_dev_absent(dev)) {
+ legacy_host[probe->slot] = host;
+ ld->platform_dev = pdev;
+ return 0;
+ }
+ }
fail:
platform_device_unregister(pdev);
return ret;
* @master: set this if we find an ATA master
* @master: set this if we find an ATA secondary
*
- * A small number of vendors implemented early PCI ATA interfaces on bridge logic
- * without the ATA interface being PCI visible. Where we have a matching PCI driver
- * we must skip the relevant device here. If we don't know about it then the legacy
- * driver is the right driver anyway.
+ * A small number of vendors implemented early PCI ATA interfaces
+ * on bridge logic without the ATA interface being PCI visible.
+ * Where we have a matching PCI driver we must skip the relevant
+ * device here. If we don't know about it then the legacy driver
+ * is the right driver anyway.
*/
-static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
+static void __init legacy_check_special_cases(struct pci_dev *p, int *primary,
+ int *secondary)
{
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
if (p->vendor == 0x1078 && p->device == 0x0000) {
if (p->vendor == 0x8086 && p->device == 0x1234) {
u16 r;
pci_read_config_word(p, 0x6C, &r);
- if (r & 0x8000) { /* ATA port enabled */
+ if (r & 0x8000) {
+ /* ATA port enabled */
if (r & 0x4000)
*secondary = 1;
else
}
}
+static __init void probe_opti_vlb(void)
+{
+ /* If an OPTI 82C46X is present find out where the channels are */
+ static const char *optis[4] = {
+ "3/463MV", "5MV",
+ "5MVA", "5MVB"
+ };
+ u8 chans = 1;
+ u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
+
+ opti82c46x = 3; /* Assume master and slave first */
+ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n",
+ optis[ctrl]);
+ if (ctrl == 3)
+ chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
+ ctrl = opti_syscfg(0xAC);
+ /* Check enabled and this port is the 465MV port. On the
+ MVB we may have two channels */
+ if (ctrl & 8) {
+ if (chans == 2) {
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ }
+ if (ctrl & 4)
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ } else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+}
+
+static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
+{
+ static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
+ /* Check card type */
+ if ((r & 0xF0) == 0xC0) {
+ /* QD6500: single channel */
+ if (r & 8)
+ /* Disabled ? */
+ return;
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6500, port);
+ }
+ if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
+ /* QD6580: dual channel */
+ if (!request_region(port + 2 , 2, "pata_qdi")) {
+ release_region(port, 2);
+ return;
+ }
+ res = inb(port + 3);
+ /* Single channel mode ? */
+ if (res & 1)
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6580, port);
+ else { /* Dual channel mode */
+ legacy_probe_add(0x1F0, 14, QDI6580DP, port);
+ /* port + 0x02, r & 0x04 */
+ legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
+ }
+ release_region(port + 2, 2);
+ }
+}
+
+static __init void probe_qdi_vlb(void)
+{
+ unsigned long flags;
+ static const unsigned long qd_port[2] = { 0x30, 0xB0 };
+ int i;
+
+ /*
+ * Check each possible QD65xx base address
+ */
+
+ for (i = 0; i < 2; i++) {
+ unsigned long port = qd_port[i];
+ u8 r, res;
+
+
+ if (request_region(port, 2, "pata_qdi")) {
+ /* Check for a card */
+ local_irq_save(flags);
+ /* I have no h/w that needs this delay but it
+ is present in the historic code */
+ r = inb(port);
+ udelay(1);
+ outb(0x19, port);
+ udelay(1);
+ res = inb(port);
+ udelay(1);
+ outb(r, port);
+ udelay(1);
+ local_irq_restore(flags);
+
+ /* Fail */
+ if (res == 0x19) {
+ release_region(port, 2);
+ continue;
+ }
+ /* Passes the presence test */
+ r = inb(port + 1);
+ udelay(1);
+ /* Check port agrees with port set */
+ if ((r & 2) >> 1 == i)
+ qdi65_identify_port(r, res, port);
+ release_region(port, 2);
+ }
+ }
+}
/**
* legacy_init - attach legacy interfaces
int ct = 0;
int primary = 0;
int secondary = 0;
- int last_port = NR_HOST;
+ int pci_present = 0;
+ struct legacy_probe *pl = &probe_list[0];
+ int slot = 0;
struct pci_dev *p = NULL;
for_each_pci_dev(p) {
int r;
- /* Check for any overlap of the system ATA mappings. Native mode controllers
- stuck on these addresses or some devices in 'raid' mode won't be found by
- the storage class test */
+ /* Check for any overlap of the system ATA mappings. Native
+ mode controllers stuck on these addresses or some devices
+ in 'raid' mode won't be found by the storage class test */
for (r = 0; r < 6; r++) {
if (pci_resource_start(p, r) == 0x1f0)
primary = 1;
/* Check for special cases */
legacy_check_special_cases(p, &primary, &secondary);
- /* If PCI bus is present then don't probe for tertiary legacy ports */
- if (probe_all == 0)
- last_port = 2;
+ /* If PCI bus is present then don't probe for tertiary
+ legacy ports */
+ pci_present = 1;
}
- /* If an OPTI 82C46X is present find out where the channels are */
- if (opti82c46x) {
- static const char *optis[4] = {
- "3/463MV", "5MV",
- "5MVA", "5MVB"
- };
- u8 chans = 1;
- u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
-
- opti82c46x = 3; /* Assume master and slave first */
- printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
- if (ctrl == 3)
- chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
- ctrl = opti_syscfg(0xAC);
- /* Check enabled and this port is the 465MV port. On the
- MVB we may have two channels */
- if (ctrl & 8) {
- if (ctrl & 4)
- opti82c46x = 2; /* Slave */
- else
- opti82c46x = 1; /* Master */
- if (chans == 2)
- opti82c46x = 3; /* Master and Slave */
- } /* Slave only */
- else if (chans == 1)
- opti82c46x = 1;
+ if (winbond == 1)
+ winbond = 0x130; /* Default port, alt is 1B0 */
+
+ if (primary == 0 || all)
+ legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
+ if (secondary == 0 || all)
+ legacy_probe_add(0x170, 15, UNKNOWN, 0);
+
+ if (probe_all || !pci_present) {
+ /* ISA/VLB extra ports */
+ legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
+ legacy_probe_add(0x168, 10, UNKNOWN, 0);
+ legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
+ legacy_probe_add(0x160, 12, UNKNOWN, 0);
}
- for (i = 0; i < last_port; i++) {
- /* Skip primary if we have seen a PCI one */
- if (i == 0 && primary == 1)
- continue;
- /* Skip secondary if we have seen a PCI one */
- if (i == 1 && secondary == 1)
+ if (opti82c46x)
+ probe_opti_vlb();
+ if (qdi)
+ probe_qdi_vlb();
+
+ for (i = 0; i < NR_HOST; i++, pl++) {
+ if (pl->port == 0)
continue;
- if (legacy_init_one(i, legacy_port[i],
- legacy_port[i] + 0x0206,
- legacy_irq[i]) == 0)
+ if (pl->type == UNKNOWN)
+ pl->type = probe_chip_type(pl);
+ pl->slot = slot++;
+ if (legacy_init_one(pl) == 0)
ct++;
}
if (ct != 0)
for (i = 0; i < nr_legacy_host; i++) {
struct legacy_data *ld = &legacy_data[i];
-
ata_host_detach(legacy_host[i]);
platform_device_unregister(ld->platform_dev);
- if (ld->timing)
- release_region(ld->timing, 2);
}
}
module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
+module_param(qdi, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
module_init(legacy_init);
module_exit(legacy_exit);
-
projects / linux-flexiantxendom0-3.2.10.git / blobdiff