Range: 0 - 8192
Default: 64
+ hpet64 [X86-64,HPET] enable 64-bit mode of the HPET timer (bnc#456700)
+
com20020= [HW,NET] ARCnet - COM20020 chipset
Format:
<io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT.
+ guestdev= [PCI,ACPI,XEN]
+ Format: {<device path>|<sbdf>}][,{<device path>|<sbdf>}[,...]]
+ Format of device path: <hid>[:<uid>]-<dev>.<func>[-<dev>.<func>[,...]][+iomul]
+ Format of sbdf: [<segment>:]<bus>:<dev>.<func>[+iomul]
+ Specifies PCI device for guest domain.
+ If PCI-PCI bridge is specified, all PCI devices
+ behind PCI-PCI bridge are reserved.
+ +iomul means that this PCI function will share
+ IO ports with other +iomul functions under same
+ switch. NOTE: if +iomul is specfied, all the functions
+ of the device will share IO ports.
+
+ guestiomuldev= [PCI,ACPI,XEN]
+ Format: [sbd][,<sbd>][,...]
+ Format of sbdf: [<segment>:]<bus>:<dev>
+ Note: function shouldn't be specified.
+ Specifies PCI device for IO port multiplexing driver.
+
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for 64-bit NUMA, off otherwise.
no_x2apic_optout
BIOS x2APIC opt-out request will be ignored
- inttest= [IA-64]
-
iomem= Disable strict checking of access to MMIO memory
strict regions from userspace.
relaxed
The default is to send the implementation identification
information.
+ nfsd.nfs4_disable_idmapping=
+ [NFSv4] When set to the default of '1', the NFSv4
+ server will return only numeric uids and gids to
+ clients using auth_sys, and will accept numeric uids
+ and gids from such clients. This is intended to ease
+ migration from NFSv2/v3.
objlayoutdriver.osd_login_prog=
[NFS] [OBJLAYOUT] sets the pathname to the program which
shutdown the other cpus. Instead use the REBOOT_VECTOR
irq.
+ nomodule Disable module load
+
nopat [X86] Disable PAT (page attribute table extension of
pagetables) support.
the default.
off: Turn ECRC off
on: Turn ECRC on.
- realloc reallocate PCI resources if allocations done by BIOS
- are erroneous.
+ realloc= Enable/disable reallocating PCI bridge resources
+ if allocations done by BIOS are too small to
+ accommodate resources required by all child
+ devices.
+ off: Turn realloc off
+ on: Turn realloc on
+ realloc same as realloc=on
+ noari do not use PCIe ARI.
+
+ pci_reserve= [PCI]
+ Format: [<sbdf>[+IO<size>][+MEM<size>]][,<sbdf>...]
+ Format of sbdf: [<segment>:]<bus>:<dev>.<func>
+ Specifies the least reserved io size or memory size
+ which is assigned to PCI bridge even when no child
+ pci device exists. This is useful with PCI hotplug.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_hp= [PCIE] PCI Express Hotplug driver options:
+ nomsi Do not use MSI for PCI Express Native Hotplug (this
+ makes all PCIe ports use INTx for hotplug services).
+
pcie_ports= [PCIE] PCIe ports handling:
auto Ask the BIOS whether or not to use native PCIe services
associated with PCIe ports (PME, hot-plug, AER). Use
Run specified binary instead of /init from the ramdisk,
used for early userspace startup. See initrd.
+ reassign_resources [PCI,ACPI,XEN]
+ Use guestdev= parameter to reassign device's
+ resources, or specify =all here.
+
reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
Format: <reboot_mode>[,<reboot_mode2>[,...]]
See arch/*/kernel/reboot.c or arch/*/kernel/process.c
unknown_nmi_panic
[X86] Cause panic on unknown NMI.
+ unsupported Allow loading of unsupported kernel modules:
+ 0 = only allow supported modules,
+ 1 = warn when loading unsupported modules,
+ 2 = don't warn.
+
+ CONFIG_ENTERPRISE_SUPPORT must be enabled for this
+ to have any effect.
+
usbcore.authorized_default=
[USB] Default USB device authorization:
(default -1 = authorized except for wireless USB,