"CD-RW Device",
US_SC_8020, US_PR_CB, NULL, 0),
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+
+UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
+ "Kobian Mercury",
+ "Binocam DCB-132",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
"Sony",
"DSC-S30/S70/S75/505V/F505/F707/F717/P8",
US_SC_SCSI, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN | US_FL_MODE_XLATE ),
+ US_FL_SINGLE_LUN ),
/* This entry is needed because the device reports Sub=ff */
UNUSUAL_DEV( 0x054c, 0x0010, 0x0500, 0x0500,
"Sony",
"DSC-T1",
US_SC_8070, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN | US_FL_MODE_XLATE ),
+ US_FL_SINGLE_LUN ),
/* Reported by wim@geeks.nl */
"Sony",
"Handycam",
US_SC_SCSI, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN | US_FL_MODE_XLATE),
+ US_FL_SINGLE_LUN ),
/* Submitted by Rajesh Kumble Nayak <nayak@obs-nice.fr> */
UNUSUAL_DEV( 0x054c, 0x002e, 0x0500, 0x0500,
"Sony",
"Handycam HC-85",
US_SC_UFI, US_PR_DEVICE, NULL,
- US_FL_SINGLE_LUN | US_FL_MODE_XLATE),
+ US_FL_SINGLE_LUN ),
UNUSUAL_DEV( 0x054c, 0x0032, 0x0000, 0x9999,
"Sony",
"Lexar",
"Jumpshot USB CF Reader",
US_SC_SCSI, US_PR_JUMPSHOT, NULL,
- US_FL_NEED_OVERRIDE | US_FL_MODE_XLATE ),
+ US_FL_NEED_OVERRIDE ),
#endif
/* Reported by Blake Matheny <bmatheny@purdue.edu> */
"Vivitar",
"Vivicam 35Xx",
US_SC_SCSI, US_PR_BULK, NULL,
- US_FL_FIX_INQUIRY | US_FL_MODE_XLATE),
+ US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100,
"TEAC",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
+ "Prolific Technology Inc.",
+ "ATAPI-6 Bridge Controller",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by Alex Butcher <alex.butcher@assursys.co.uk> */
+UNUSUAL_DEV( 0x067b, 0x3507, 0x0001, 0x0001,
+ "Prolific Technology Inc.",
+ "ATAPI-6 Bridge Controller",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Submitted by Benny Sjostrand <benny@hostmobility.com> */
UNUSUAL_DEV( 0x0686, 0x4011, 0x0001, 0x0001,
"Minolta",
"Datafab",
"MDCFE-B USB CF Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
-
- /*
- * The following Datafab-based devices may or may not work
- * using the current driver...the 0xffff is arbitrary since I
- * don't know what device versions exist for these guys.
- *
- * The 0xa003 and 0xa004 devices in particular I'm curious about.
- * I'm told they exist but so far nobody has come forward to say that
- * they work with this driver. Given the success we've had getting
- * other Datafab-based cards operational with this driver, I've decided
- * to leave these two devices in the list.
- */
+ 0 ),
+
+/*
+ * The following Datafab-based devices may or may not work
+ * using the current driver...the 0xffff is arbitrary since I
+ * don't know what device versions exist for these guys.
+ *
+ * The 0xa003 and 0xa004 devices in particular I'm curious about.
+ * I'm told they exist but so far nobody has come forward to say that
+ * they work with this driver. Given the success we've had getting
+ * other Datafab-based cards operational with this driver, I've decided
+ * to leave these two devices in the list.
+ */
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
"SIIG/Datafab",
"SIIG/Datafab Memory Stick+CF Reader/Writer",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
"PNY/Datafab",
"PNY/Datafab CF+SM Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
"Simple Tech/Datafab",
"Simple Tech/Datafab CF+SM Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
US_SC_SCSI, US_PR_DATAFAB, NULL,
- US_FL_MODE_XLATE ),
+ 0 ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
/* SM part - aeb <Andries.Brouwer@cwi.nl> */
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
-/* Aiptek PocketCAM 3Mega
- * Nicolas DUPEUX <nicolas@dupeux.net>
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Flag will support Bulk devices which use a standards-violating 32-byte
+ * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
+ * Grandtech GT892x chip, which request "Proprietary SCSI Bulk" support.
*/
-UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999,
- "AIPTEK",
- "PocketCAM 3Mega",
+
+UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110,
+ "Grandtech",
+ "DC2MEGA",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_MODE_XLATE ),
+ US_FL_BULK32),
+
/* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
"Trumpion",
"t33520 USB Flash Card Controller",
US_SC_DEVICE, US_PR_BULK, NULL,
- US_FL_NEED_OVERRIDE | US_FL_MODE_XLATE),
+ US_FL_NEED_OVERRIDE ),
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",
"MP3 player",
US_SC_RBC, US_PR_BULK, NULL,
- US_FL_MODE_XLATE),
+ 0 ),
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-UNUSUAL_DEV( 0x097a, 0x0001, 0x0000, 0x0001,
- "Minds@Work",
- "Digital Wallet",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_MODE_XLATE ),
-
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Submitted by Daniel Drake <dsd@gentoo.org>
+ * Reported by dayul on the Gentoo Forums */
+UNUSUAL_DEV( 0x0ea0, 0x2168, 0x0110, 0x0110,
+ "Ours Technology",
+ "Flash Disk",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Rastislav Stanik <rs_kernel@yahoo.com> */
UNUSUAL_DEV( 0x0ea0, 0x6828, 0x0110, 0x0110,
"USB",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
0 ),
-/* Reported by Dan Pilone <pilone@slac.com>
- * The device needs the flags only.
- * Also reported by Brian Hall <brihall@pcisys.net>, again for flags.
- * I also suspect this device may have a broken serial number.
- */
-UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x9999,
- "CCYU TECHNOLOGY",
- "EasyDisk Portable Device",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_MODE_XLATE ),
-
/* Reported by Kotrla Vitezslav <kotrla@ceb.cz> */
UNUSUAL_DEV( 0x1370, 0x6828, 0x0110, 0x0110,
"SWISSBIT",
projects / linux-flexiantxendom0-3.2.10.git / blobdiff