- patches.apparmor/remove_suid_new_case_in_2.6.22.diff: Merge fix.

[linux-flexiantxendom0-3.2.10.git] / arch / powerpc / kernel / legacy_serial.c

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 325f490..cea8045 100644 (file)
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -44,12 +44,12 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
        int index;
 
        /* get clock freq. if present */
-       clk = get_property(np, "clock-frequency", NULL);
+       clk = of_get_property(np, "clock-frequency", NULL);
        if (clk && *clk)
                clock = *clk;
 
        /* get default speed if present */
-       spd = get_property(np, "current-speed", NULL);
+       spd = of_get_property(np, "current-speed", NULL);
 
        /* If we have a location index, then try to use it */
        if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
@@ -115,17 +115,18 @@ static int __init add_legacy_soc_port(struct device_node *np,
 {
        u64 addr;
        const u32 *addrp;
-       upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+       upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ
+               | UPF_FIXED_PORT;
        struct device_node *tsi = of_get_parent(np);
 
        /* We only support ports that have a clock frequency properly
         * encoded in the device-tree.
         */
-       if (get_property(np, "clock-frequency", NULL) == NULL)
+       if (of_get_property(np, "clock-frequency", NULL) == NULL)
                return -1;
 
        /* if rtas uses this device, don't try to use it as well */
-       if (get_property(np, "used-by-rtas", NULL) != NULL)
+       if (of_get_property(np, "used-by-rtas", NULL) != NULL)
                return -1;
 
        /* Get the address */
@@ -157,7 +158,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
        DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
 
        /* Get the ISA port number */
-       reg = get_property(np, "reg", NULL);
+       reg = of_get_property(np, "reg", NULL);
        if (reg == NULL)
                return -1;
 
@@ -168,7 +169,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
        /* Now look for an "ibm,aix-loc" property that gives us ordering
         * if any...
         */
-       typep = get_property(np, "ibm,aix-loc", NULL);
+       typep = of_get_property(np, "ibm,aix-loc", NULL);
 
        /* If we have a location index, then use it */
        if (typep && *typep == 'S')
@@ -206,7 +207,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
         * compatible UARTs on PCI need all sort of quirks (port offsets
         * etc...) that this code doesn't know about
         */
-       if (get_property(np, "clock-frequency", NULL) == NULL)
+       if (of_get_property(np, "clock-frequency", NULL) == NULL)
                return -1;
 
        /* Get the PCI address. Assume BAR 0 */
@@ -232,7 +233,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
         * we get to their "reg" property
         */
        if (np != pci_dev) {
-               const u32 *reg = get_property(np, "reg", NULL);
+               const u32 *reg = of_get_property(np, "reg", NULL);
                if (reg && (*reg < 4))
                        index = lindex = *reg;
        }
@@ -243,9 +244,9 @@ static int __init add_legacy_pci_port(struct device_node *np,
         * doesn't work for these settings, you'll have to add your own special
         * cases here
         */
-       if (device_is_compatible(pci_dev, "pci13a8,152") ||
-           device_is_compatible(pci_dev, "pci13a8,154") ||
-           device_is_compatible(pci_dev, "pci13a8,158")) {
+       if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
+           of_device_is_compatible(pci_dev, "pci13a8,154") ||
+           of_device_is_compatible(pci_dev, "pci13a8,158")) {
                addr += 0x200 * lindex;
                base += 0x200 * lindex;
        } else {
@@ -296,7 +297,7 @@ void __init find_legacy_serial_ports(void)
        DBG(" -> find_legacy_serial_port()\n");
 
        /* Now find out if one of these is out firmware console */
-       path = get_property(of_chosen, "linux,stdout-path", NULL);
+       path = of_get_property(of_chosen, "linux,stdout-path", NULL);
        if (path != NULL) {
                stdout = of_find_node_by_path(path);
                if (stdout)
@@ -364,11 +365,11 @@ void __init find_legacy_serial_ports(void)
                /* Check for known pciclass, and also check wether we have
                 * a device with child nodes for ports or not
                 */
-               if (device_is_compatible(np, "pciclass,0700") ||
-                   device_is_compatible(np, "pciclass,070002"))
+               if (of_device_is_compatible(np, "pciclass,0700") ||
+                   of_device_is_compatible(np, "pciclass,070002"))
                        pci = np;
-               else if (device_is_compatible(parent, "pciclass,0700") ||
-                        device_is_compatible(parent, "pciclass,070002"))
+               else if (of_device_is_compatible(parent, "pciclass,0700") ||
+                        of_device_is_compatible(parent, "pciclass,070002"))
                        pci = parent;
                else {
                        of_node_put(parent);
@@ -529,7 +530,7 @@ static int __init check_legacy_serial_console(void)
        }
        /* We are getting a weird phandle from OF ... */
        /* ... So use the full path instead */
-       name = get_property(of_chosen, "linux,stdout-path", NULL);
+       name = of_get_property(of_chosen, "linux,stdout-path", NULL);
        if (name == NULL) {
                DBG(" no linux,stdout-path !\n");
                return -ENODEV;
@@ -541,12 +542,12 @@ static int __init check_legacy_serial_console(void)
        }
        DBG("stdout is %s\n", prom_stdout->full_name);
 
-       name = get_property(prom_stdout, "name", NULL);
+       name = of_get_property(prom_stdout, "name", NULL);
        if (!name) {
                DBG(" stdout package has no name !\n");
                goto not_found;
        }
-       spd = get_property(prom_stdout, "current-speed", NULL);
+       spd = of_get_property(prom_stdout, "current-speed", NULL);
        if (spd)
                speed = *spd;