#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <asm/desc.h>
#include <asm/arch_hooks.h>
#include <asm/nmi.h>
-#include <asm/pda.h>
-#include <asm/genapic.h>
#include <mach_apic.h>
#include <mach_wakecpu.h>
#include <smpboot_hooks.h>
#include <asm/vmi.h>
+#include <asm/mtrr.h>
/* Set if we find a B stepping CPU */
static int __devinitdata smp_b_stepping;
*c = boot_cpu_data;
if (id!=0)
- identify_cpu(c);
+ identify_secondary_cpu(c);
/*
* Mask B, Pentium, but not Pentium MMX
*/
static void __cpuinit start_secondary(void *unused)
{
/*
- * Don't put *anything* before secondary_cpu_init(), SMP
- * booting is too fragile that we want to limit the
- * things done here to the most necessary things.
+ * Don't put *anything* before cpu_init(), SMP booting is too
+ * fragile that we want to limit the things done here to the
+ * most necessary things.
*/
#ifdef CONFIG_VMI
vmi_bringup();
#endif
- secondary_cpu_init();
+ cpu_init();
preempt_disable();
smp_callin();
while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
void __devinit initialize_secondary(void)
{
/*
- * switch to the per CPU GDT we already set up
- * in do_boot_cpu()
- */
- cpu_set_gdt(current_thread_info()->cpu);
-
- /*
* We don't actually need to load the full TSS,
* basically just the stack pointer and the eip.
*/
void * esp;
unsigned short ss;
} stack_start;
-extern struct i386_pda *start_pda;
#ifdef CONFIG_NUMA
unmap_cpu_to_node(cpu);
}
-#if APIC_DEBUG
static inline void __inquire_remote_apic(int apicid)
{
int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
char *names[] = { "ID", "VERSION", "SPIV" };
- int timeout, status;
+ int timeout;
+ unsigned long status;
printk("Inquiring remote APIC #%d...\n", apicid);
/*
* Wait for idle.
*/
- apic_wait_icr_idle();
+ status = safe_apic_wait_icr_idle();
+ if (status)
+ printk("a previous APIC delivery may have failed\n");
apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
- printk("%08x\n", status);
+ printk("%lx\n", status);
break;
default:
printk("failed\n");
}
}
}
-#endif
#ifdef WAKE_SECONDARY_VIA_NMI
/*
static int __devinit
wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
{
- unsigned long send_status = 0, accept_status = 0;
- int timeout, maxlvt;
+ unsigned long send_status, accept_status = 0;
+ int maxlvt;
/* Target chip */
apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
Dprintk("Waiting for send to finish...\n");
- timeout = 0;
- do {
- Dprintk("+");
- udelay(100);
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
+ send_status = safe_apic_wait_icr_idle();
/*
* Give the other CPU some time to accept the IPI.
static int __devinit
wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
{
- unsigned long send_status = 0, accept_status = 0;
- int maxlvt, timeout, num_starts, j;
+ unsigned long send_status, accept_status = 0;
+ int maxlvt, num_starts, j;
/*
* Be paranoid about clearing APIC errors.
| APIC_DM_INIT);
Dprintk("Waiting for send to finish...\n");
- timeout = 0;
- do {
- Dprintk("+");
- udelay(100);
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
+ send_status = safe_apic_wait_icr_idle();
mdelay(10);
apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
Dprintk("Waiting for send to finish...\n");
- timeout = 0;
- do {
- Dprintk("+");
- udelay(100);
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
+ send_status = safe_apic_wait_icr_idle();
atomic_set(&init_deasserted, 1);
Dprintk("Startup point 1.\n");
Dprintk("Waiting for send to finish...\n");
- timeout = 0;
- do {
- Dprintk("+");
- udelay(100);
- send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
- } while (send_status && (timeout++ < 1000));
+ send_status = safe_apic_wait_icr_idle();
/*
* Give the other CPU some time to accept the IPI.
unsigned short nmi_high = 0, nmi_low = 0;
/*
+ * Save current MTRR state in case it was changed since early boot
+ * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
+ */
+ mtrr_save_state();
+
+ /*
* We can't use kernel_thread since we must avoid to
* reschedule the child.
*/
if (IS_ERR(idle))
panic("failed fork for CPU %d", cpu);
- /* Pre-allocate and initialize the CPU's GDT and PDA so it
- doesn't have to do any memory allocation during the
- delicate CPU-bringup phase. */
- if (!init_gdt(cpu, idle)) {
- printk(KERN_INFO "Couldn't allocate GDT/PDA for CPU %d\n", cpu);
- return -1; /* ? */
- }
+ init_gdt(cpu);
+ per_cpu(current_task, cpu) = idle;
+ early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
idle->thread.eip = (unsigned long) start_secondary;
/* start_eip had better be page-aligned! */
DECLARE_COMPLETION_ONSTACK(done);
struct warm_boot_cpu_info info;
int apicid, ret;
- struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
apicid = x86_cpu_to_apicid[cpu];
if (apicid == BAD_APICID) {
goto exit;
}
- /*
- * the CPU isn't initialized at boot time, allocate gdt table here.
- * cpu_init will initialize it
- */
- if (!cpu_gdt_descr->address) {
- cpu_gdt_descr->address = get_zeroed_page(GFP_KERNEL);
- if (!cpu_gdt_descr->address)
- printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
- ret = -ENOMEM;
- goto exit;
- }
-
info.complete = &done;
info.apicid = apicid;
info.cpu = cpu;
/* These are wrappers to interface to the new boot process. Someone
who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
smp_commenced_mask = cpumask_of_cpu(0);
cpu_callin_map = cpumask_of_cpu(0);
smp_boot_cpus(max_cpus);
}
-void __devinit smp_prepare_boot_cpu(void)
+void __init native_smp_prepare_boot_cpu(void)
{
- cpu_set(smp_processor_id(), cpu_online_map);
- cpu_set(smp_processor_id(), cpu_callout_map);
- cpu_set(smp_processor_id(), cpu_present_map);
- cpu_set(smp_processor_id(), cpu_possible_map);
- per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+ unsigned int cpu = smp_processor_id();
+
+ init_gdt(cpu);
+ switch_to_new_gdt();
+
+ cpu_set(cpu, cpu_online_map);
+ cpu_set(cpu, cpu_callout_map);
+ cpu_set(cpu, cpu_present_map);
+ cpu_set(cpu, cpu_possible_map);
+ __get_cpu_var(cpu_state) = CPU_ONLINE;
}
#ifdef CONFIG_HOTPLUG_CPU
}
#endif /* CONFIG_HOTPLUG_CPU */
-int __cpuinit __cpu_up(unsigned int cpu)
+int __cpuinit native_cpu_up(unsigned int cpu)
{
unsigned long flags;
#ifdef CONFIG_HOTPLUG_CPU
touch_nmi_watchdog();
}
-#ifdef CONFIG_X86_GENERICARCH
- if (num_online_cpus() > 8 && genapic == &apic_default)
- panic("Default flat APIC routing can't be used with > 8 cpus\n");
-#endif
-
return 0;
}
-void __init smp_cpus_done(unsigned int max_cpus)
+void __init native_smp_cpus_done(unsigned int max_cpus)
{
#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
projects / linux-flexiantxendom0-3.2.10.git / blobdiff