- patches.arch/x86_mce_intel_decode_physical_address.patch:

[linux-flexiantxendom0-3.2.10.git] / include / linux / nl80211.h

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 28ba20f..b7c77f9 100644 (file)
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -52,6 +52,8 @@
  *     %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
  *     %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
  *     and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
+ *     However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
+ *     instead, the support here is for backward compatibility only.
  * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
  *     or rename notification. Has attributes %NL80211_ATTR_WIPHY and
  *     %NL80211_ATTR_WIPHY_NAME.
@@ -323,6 +325,21 @@
  *     the TX command and %NL80211_ATTR_FRAME includes the contents of the
  *     frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
  *     the frame.
+ * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
+ *     is used to configure connection quality monitoring notification trigger
+ *     levels.
+ * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
+ *     command is used as an event to indicate the that a trigger level was
+ *     reached.
+ * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
+ *     and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
+ *     by %NL80211_ATTR_IFINDEX) shall operate on.
+ *     In case multiple channels are supported by the device, the mechanism
+ *     with which it switches channels is implementation-defined.
+ *     When a monitor interface is given, it can only switch channel while
+ *     no other interfaces are operating to avoid disturbing the operation
+ *     of any other interfaces, and other interfaces will again take
+ *     precedence when they are used.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
@@ -419,6 +436,11 @@ enum nl80211_commands {
        NL80211_CMD_SET_POWER_SAVE,
        NL80211_CMD_GET_POWER_SAVE,
 
+       NL80211_CMD_SET_CQM,
+       NL80211_CMD_NOTIFY_CQM,
+
+       NL80211_CMD_SET_CHANNEL,
+
        /* add new commands above here */
 
        /* used to define NL80211_CMD_MAX below */
@@ -691,6 +713,18 @@ enum nl80211_commands {
  * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
  *     acknowledged by the recipient.
  *
+ * @NL80211_ATTR_CQM: connection quality monitor configuration in a
+ *     nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
+ *
+ * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
+ *     is requesting a local authentication/association state change without
+ *     invoking actual management frame exchange. This can be used with
+ *     NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
+ *     NL80211_CMD_DISASSOCIATE.
+ *
+ * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
+ *     connected to this BSS.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -842,6 +876,12 @@ enum nl80211_attrs {
 
        NL80211_ATTR_PS_STATE,
 
+       NL80211_ATTR_CQM,
+
+       NL80211_ATTR_LOCAL_STATE_CHANGE,
+
+       NL80211_ATTR_AP_ISOLATE,
+
        /* add attributes here, update the policy in nl80211.c */
 
        __NL80211_ATTR_AFTER_LAST,
@@ -1583,4 +1623,40 @@ enum nl80211_ps_state {
        NL80211_PS_ENABLED,
 };
 
+/**
+ * enum nl80211_attr_cqm - connection quality monitor attributes
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ *     the threshold for the RSSI level at which an event will be sent. Zero
+ *     to disable.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ *     the minimum amount the RSSI level must change after an event before a
+ *     new event may be issued (to reduce effects of RSSI oscillation).
+ * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+enum nl80211_attr_cqm {
+       __NL80211_ATTR_CQM_INVALID,
+       NL80211_ATTR_CQM_RSSI_THOLD,
+       NL80211_ATTR_CQM_RSSI_HYST,
+       NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+
+       /* keep last */
+       __NL80211_ATTR_CQM_AFTER_LAST,
+       NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
+};
+
+/**
+ * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the
+ *      configured threshold
+ * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the
+ *      configured threshold
+ */
+enum nl80211_cqm_rssi_threshold_event {
+       NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
+       NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
+};
+
 #endif /* __LINUX_NL80211_H */