*
*/
#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
+ const typeof(((type *)0)->member) (*__mptr = (ptr)); \
+ (type *)((char *)__mptr - offsetof(type, member)); })
#endif
#define KEY_TYPE_NA 0x0
-#define KEY_TYPE_WEP40 0x1
+#define KEY_TYPE_WEP40 0x1
#define KEY_TYPE_TKIP 0x2
#define KEY_TYPE_CCMP 0x4
#define KEY_TYPE_WEP104 0x5
/* added for rtl819x tx procedure */
#define MAX_QUEUE_SIZE 0x10
-//
-// 8190 queue mapping
-//
+/*
+ * 8190 queue mapping
+ */
#define BK_QUEUE 0
#define BE_QUEUE 1
#define VI_QUEUE 2
#define LOW_QUEUE BE_QUEUE
#define NORMAL_QUEUE MGNT_QUEUE
-//added by amy for ps
+/* added by amy for ps */
#define SWRF_TIMEOUT 50
-//added by amy for LEAP related
-#define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
-#define SUPPORT_CKIP_MIC 0x08 // bit3
-#define SUPPORT_CKIP_PK 0x10 // bit4
+/* added by amy for LEAP related */
+#define IE_CISCO_FLAG_POSITION 0x08 /* Flag byte: byte 8, numbered from 0. */
+#define SUPPORT_CKIP_MIC 0x08 /* bit3 */
+#define SUPPORT_CKIP_PK 0x10 /* bit4 */
/* defined for skb cb field */
/* At most 28 byte */
typedef struct cb_desc {
u8 bEncrypt:1;
u8 bTxDisableRateFallBack:1;
u8 bTxUseDriverAssingedRate:1;
- u8 bHwSec:1; //indicate whether use Hw security. WB
+ u8 bHwSec:1; /* indicate whether use Hw security. WB */
u8 reserved1;
u8 bRTSUseShortGI:1;
u8 bMulticast:1;
u8 bBroadcast:1;
- //u8 reserved2:2;
u8 drv_agg_enable:1;
u8 reserved2:1;
/* Tx Desc related element(12-19) */
u8 rata_index;
u8 queue_index;
- //u8 reserved3;
- //u8 reserved4;
u16 txbuf_size;
- //u8 reserved5;
u8 RATRIndex;
u8 reserved6;
u8 reserved7;
u8 rts_rate;
u8 ampdu_factor;
u8 ampdu_density;
- //u8 reserved9;
- //u8 reserved10;
- //u8 reserved11;
u8 DrvAggrNum;
u16 pkt_size;
u8 reserved12;
-}cb_desc, *pcb_desc;
+} cb_desc, *pcb_desc;
/*--------------------------Define -------------------------------------------*/
#define MGN_1M 0x02
#define MGN_MCS14 0x8e
#define MGN_MCS15 0x8f
-//----------------------------------------------------------------------------
-// 802.11 Management frame Reason Code field
-//----------------------------------------------------------------------------
+/*
+ * 802.11 Management frame Reason Code field
+ */
enum _ReasonCode{
unspec_reason = 0x1,
auth_not_valid = 0x2,
disas_lv_ss = 0x8,
asoc_not_auth = 0x9,
- //----MIC_CHECK
+ /* ----MIC_CHECK */
mic_failure = 0xe,
- //----END MIC_CHECK
+ /* ----END MIC_CHECK */
- // Reason code defined in 802.11i D10.0 p.28.
+ /* Reason code defined in 802.11i D10.0 p.28. */
invalid_IE = 0x0d,
four_way_tmout = 0x0f,
two_way_tmout = 0x10,
invalid_AKMP = 0x14,
unsup_RSNIEver = 0x15,
invalid_RSNIE = 0x16,
- auth_802_1x_fail= 0x17,
+ auth_802_1x_fail = 0x17,
ciper_reject = 0x18,
- // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
- QoS_unspec = 0x20, // 32
- QAP_bandwidth = 0x21, // 33
- poor_condition = 0x22, // 34
- no_facility = 0x23, // 35
- // Where is 36???
- req_declined = 0x25, // 37
- invalid_param = 0x26, // 38
- req_not_honored= 0x27, // 39
- TS_not_created = 0x2F, // 47
- DL_not_allowed = 0x30, // 48
- dest_not_exist = 0x31, // 49
- dest_not_QSTA = 0x32, // 50
+ /* Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. */
+ QoS_unspec = 0x20, /* 32 */
+ QAP_bandwidth = 0x21, /* 33 */
+ poor_condition = 0x22, /* 34 */
+ no_facility = 0x23, /* 35 */
+ /* Where is 36??? */
+ req_declined = 0x25, /* 37 */
+ invalid_param = 0x26, /* 38 */
+ req_not_honored = 0x27, /* 39 */
+ TS_not_created = 0x2F, /* 47 */
+ DL_not_allowed = 0x30, /* 48 */
+ dest_not_exist = 0x31, /* 49 */
+ dest_not_QSTA = 0x32, /* 50 */
};
-#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10
+#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A) || \
+ (priv->ieee80211->current_network.mode == IEEE_N_24G) || \
+ (priv->ieee80211->current_network.mode == IEEE_N_5G)) ? 16 : 10
#define MGMT_QUEUE_NUM 5
#define IEEE_PARAM_PRIVACY_INVOKED 4
#define IEEE_PARAM_AUTH_ALGS 5
#define IEEE_PARAM_IEEE_802_1X 6
-//It should consistent with the driver_XXX.c
-// David, 2006.9.26
+/* It should consistent with the driver_XXX.c */
#define IEEE_PARAM_WPAX_SELECT 7
-//Added for notify the encryption type selection
-// David, 2006.9.26
+/* Added for notify the encryption type selection */
#define IEEE_PROTO_WPA 1
#define IEEE_PROTO_RSN 2
-//Added for notify the encryption type selection
-// David, 2006.9.26
+/* Added for notify the encryption type selection */
#define IEEE_WPAX_USEGROUP 0
#define IEEE_WPAX_WEP40 1
#define IEEE_WPAX_TKIP 2
#define MAX_IE_LEN 0xff
-// added for kernel conflict
+/* added for kernel conflict */
#define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
#define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
#define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
u8 key[0];
} crypt;
} u;
-}ieee_param;
+} ieee_param;
#if WIRELESS_EXT < 17
#endif
-// linux under 2.6.9 release may not support it, so modify it for common use
+/* linux under 2.6.9 release may not support it, so modify it for common use */
#define MSECS(t) msecs_to_jiffies(t)
#define msleep_interruptible_rsl msleep_interruptible
#define IEEE80211_FCTL_FRAMETYPE 0x00fc
#define IEEE80211_FCTL_TODS 0x0100
#define IEEE80211_FCTL_FROMDS 0x0200
-#define IEEE80211_FCTL_DSTODS 0x0300 //added by david
+#define IEEE80211_FCTL_DSTODS 0x0300
#define IEEE80211_FCTL_MOREFRAGS 0x0400
#define IEEE80211_FCTL_RETRY 0x0800
#define IEEE80211_FCTL_PM 0x1000
#define IEEE80211_STYPE_CFACK 0x0050
#define IEEE80211_STYPE_CFPOLL 0x0060
#define IEEE80211_STYPE_CFACKPOLL 0x0070
-#define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
+#define IEEE80211_STYPE_QOS_DATA 0x0080
#define IEEE80211_STYPE_QOS_NULL 0x00C0
#define IEEE80211_SCTL_FRAG 0x000F
#define IEEE80211_QCTL_TID 0x000F
#define FC_QOS_BIT BIT7
-#define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
-#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
-//added by wb. Is this right?
-#define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
-#define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b) (((a-b)&0x800)!=0)
+#define IsDataFrame(pdu) (((pdu[0] & 0x0C) == 0x08) ? true : false)
+#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)))
+
+#define IsQoSDataFrame(pframe) ((*(u16 *)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
+#define Frame_Order(pframe) (*(u16 *)pframe&IEEE80211_FCTL_ORDER)
+#define SN_LESS(a, b) (((a-b)&0x800) != 0)
#define SN_EQUAL(a, b) (a == b)
#define MAX_DEV_ADDR_SIZE 8
typedef enum _ACT_CATEGORY{
} BA_ACTION, *PBA_ACTION;
typedef enum _InitialGainOpType{
- IG_Backup=0,
+ IG_Backup = 0,
IG_Restore,
IG_Max
-}InitialGainOpType;
+} InitialGainOpType;
/* debug macros */
#define CONFIG_IEEE80211_DEBUG
#define IEEE80211_DEBUG(level, fmt, args...) \
do { if (ieee80211_debug_level & (level)) \
printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+/* wb added to debug out data buf
+ * if you want print DATA buffer related BA, please set ieee80211_debug_level
+ * to DATA|BA
+ */
#define IEEE80211_DEBUG_DATA(level, data, datalen) \
- do{ if ((ieee80211_debug_level & (level)) == (level)) \
- { \
+ do { if ((ieee80211_debug_level & (level)) == (level)) { \
int i; \
- u8* pdata = (u8*) data; \
+ u8* pdata = (u8 *) data; \
printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
- for(i=0; i<(int)(datalen); i++) \
- { \
+ for (i = 0; i < (int)(datalen); i++) { \
printk("%2x ", pdata[i]); \
- if ((i+1)%16 == 0) printk("\n"); \
- } \
+ if ((i+1)%16 == 0) \
+ printk("\n"); \
+ } \
printk("\n"); \
} \
} while (0)
#else
#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
+#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while (0)
#endif /* CONFIG_IEEE80211_DEBUG */
/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
#define IEEE80211_DL_TX (1<<8)
#define IEEE80211_DL_RX (1<<9)
-#define IEEE80211_DL_HT (1<<10) //HT
-#define IEEE80211_DL_BA (1<<11) //ba
-#define IEEE80211_DL_TS (1<<12) //TS
+#define IEEE80211_DL_HT (1<<10) /* HT */
+#define IEEE80211_DL_BA (1<<11) /* ba */
+#define IEEE80211_DL_TS (1<<12) /* TS */
#define IEEE80211_DL_QOS (1<<13)
#define IEEE80211_DL_REORDER (1<<14)
#define IEEE80211_DL_IOT (1<<15)
#define IEEE80211_DL_IPS (1<<16)
-#define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
-#define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
-#define IEEE80211_DL_ERR (1<<31) //always open
+#define IEEE80211_DL_TRACE (1<<29) /* trace function, need to user net_ratelimit() together in order not to print too much to the screen */
+#define IEEE80211_DL_DATA (1<<30) /* use this flag to control whether print data buf out. */
+#define IEEE80211_DL_ERR (1<<31) /* always open */
#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
/* Added by Annie, 2005-11-22. */
#define MAX_STR_LEN 64
/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
-#define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
+#define PRINTABLE(_ch) (_ch > '!' && _ch < '~')
#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
- if((_Comp) & level) \
- { \
+ if ((_Comp) & level) { \
int __i; \
u8 buffer[MAX_STR_LEN]; \
- int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
+ int length = (_Len < MAX_STR_LEN) ? _Len : (MAX_STR_LEN - 1); \
memset(buffer, 0, MAX_STR_LEN); \
- memcpy(buffer, (u8 *)_Ptr, length ); \
- for( __i=0; __i<MAX_STR_LEN; __i++ ) \
- { \
- if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
+ memcpy(buffer, (u8 *)_Ptr, length); \
+ for (__i = 0; __i < MAX_STR_LEN; __i++) { \
+ if (!PRINTABLE(buffer[__i])) \
+ buffer[__i] = '?'; \
} \
buffer[length] = '\0'; \
printk("Rtl819x: "); \
#include <linux/if_arp.h> /* ARPHRD_ETHER */
#ifndef WIRELESS_SPY
-#define WIRELESS_SPY // enable iwspy support
+#define WIRELESS_SPY /* enable iwspy support */
#endif
-#include <net/iw_handler.h> // new driver API
+#include <net/iw_handler.h> /* new driver API */
#ifndef ETH_P_PAE
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
u32 beacon_time;
u8 nic_type;
u16 Length;
- // u8 DataRate; // In 0.5 Mbps
- u8 SignalQuality; // in 0-100 index.
- s32 RecvSignalPower; // Real power in dBm for this packet, no beautification and aggregation.
- s8 RxPower; // in dBm Translate from PWdB
- u8 SignalStrength; // in 0-100 index.
+ u8 SignalQuality; /* in 0-100 index. */
+ s32 RecvSignalPower; /* Real power in dBm for this packet, no beautification and aggregation. */
+ s8 RxPower; /* in dBm Translate from PWdB */
+ u8 SignalStrength; /* in 0-100 index. */
u16 bHwError:1;
u16 bCRC:1;
u16 bICV:1;
u16 bShortPreamble:1;
- u16 Antenna:1; //for rtl8185
- u16 Decrypted:1; //for rtl8185, rtl8187
- u16 Wakeup:1; //for rtl8185
- u16 Reserved0:1; //for rtl8185
+ u16 Antenna:1; /* for rtl8185 */
+ u16 Decrypted:1; /* for rtl8185, rtl8187 */
+ u16 Wakeup:1; /* for rtl8185 */
+ u16 Reserved0:1; /* for rtl8185 */
u8 AGC;
u32 TimeStampLow;
u32 TimeStampHigh;
bool bShift;
- bool bIsQosData; // Added by Annie, 2005-12-22.
+ bool bIsQosData;
u8 UserPriority;
- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
- //1Attention Please!!!<11n or 8190 specific code should be put below this line>
- //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ /*
+ * 1Attention Please!!!<11n or 8190 specific code should be put below this line>
+ */
u8 RxDrvInfoSize;
u8 RxBufShift;
bool bContainHTC;
bool RxIs40MHzPacket;
u32 RxPWDBAll;
- u8 RxMIMOSignalStrength[4]; // in 0~100 index
+ u8 RxMIMOSignalStrength[4]; /* in 0~100 index */
s8 RxMIMOSignalQuality[2];
bool bPacketMatchBSSID;
bool bIsCCK;
bool bPacketToSelf;
- //added by amy
- u8* virtual_address;
- u16 packetlength; // Total packet length: Must equal to sum of all FragLength
- u16 fraglength; // FragLength should equal to PacketLength in non-fragment case
- u16 fragoffset; // Data offset for this fragment
+ u8 *virtual_address;
+ u16 packetlength; /* Total packet length: Must equal to sum of all FragLength */
+ u16 fraglength; /* FragLength should equal to PacketLength in non-fragment case */
+ u16 fragoffset; /* Data offset for this fragment */
u16 ntotalfrag;
bool bisrxaggrsubframe;
- bool bPacketBeacon; //cosa add for rssi
- bool bToSelfBA; //cosa add for rssi
- char cck_adc_pwdb[4]; //cosa add for rx path selection
+ bool bPacketBeacon; /* cosa add for rssi */
+ bool bToSelfBA; /* cosa add for rssi */
+ char cck_adc_pwdb[4]; /* cosa add for rx path selection */
u16 Seq_Num;
};
MFIE_TYPE_ERP = 42,
MFIE_TYPE_RSN = 48,
MFIE_TYPE_RATES_EX = 50,
- MFIE_TYPE_HT_CAP= 45,
- MFIE_TYPE_HT_INFO= 61,
- MFIE_TYPE_AIRONET=133,
+ MFIE_TYPE_HT_CAP = 45,
+ MFIE_TYPE_HT_INFO = 61,
+ MFIE_TYPE_AIRONET = 133,
MFIE_TYPE_GENERIC = 221,
MFIE_TYPE_QOS_PARAMETER = 222,
};
struct ieee80211_drv_agg_txb {
u8 nr_drv_agg_frames;
struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
-}__attribute__((packed));
+} __attribute__((packed));
#define MAX_SUBFRAME_COUNT 64
struct ieee80211_rxb {
struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
-}__attribute__((packed));
+} __attribute__((packed));
typedef union _frameqos {
u16 shortdata;
u16 ack_policy:2;
u16 reserved:1;
u16 txop:8;
- }field;
-}frameqos,*pframeqos;
+ } field;
+} frameqos, *pframeqos;
/* SWEEP TABLE ENTRIES NUMBER*/
#define MAX_SWEEP_TAB_ENTRIES 42
#define MAX_CHANNEL_NUMBER 161
#define IEEE80211_SOFTMAC_SCAN_TIME 100
-//(HZ / 2)
+/* (HZ / 2) */
#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
#define CRC_LENGTH 4U
u8 tim_period;
} __attribute__ ((packed));
-//#else
struct ieee80211_wmm_ac_param {
u8 ac_aci_acm_aifsn;
u8 ac_ecwmin_ecwmax;
u32 min_phy_rate;
u16 surp_band_allow;
u16 medium_time;
-}__attribute__((packed));
+} __attribute__((packed));
enum eap_type {
EAP_PACKET = 0,
EAPOL_START,
{
return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
}
-//added by amy for reorder
-static inline u8 Frame_QoSTID(u8* buf)
+static inline u8 Frame_QoSTID(u8 *buf)
{
struct ieee80211_hdr_3addr *hdr;
u16 fc;
hdr = (struct ieee80211_hdr_3addr *)buf;
fc = le16_to_cpu(hdr->frame_ctl);
- return (u8)((frameqos*)(buf + (((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24)))->field.tid;
+ return (u8)((frameqos *)(buf + (((fc & IEEE80211_FCTL_TODS) && (fc & IEEE80211_FCTL_FROMDS)) ? 30 : 24)))->field.tid;
}
-//added by amy for reorder
struct eapol {
u8 snap[6];
*/
#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
+#define IEEE80211_DEFAULT_BASIC_RATE 2 /* 1Mbps */
enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
#define MAX_SP_Len (WMM_all_frame << 4)
#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-//added by David for QoS 2006/6/30
-//#define WMM_Hang_8187
+
#ifdef WMM_Hang_8187
#undef WMM_Hang_8187
#endif
#define MAX_RECEIVE_BUFFER_SIZE 9100
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
-//#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
+/* UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP */
#define UP2AC(up) ( \
((up) < 1) ? WME_AC_BE : \
((up) < 3) ? WME_AC_BK : \
((up) < 4) ? WME_AC_BE : \
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
+/* AC Mapping to UP, using in Tx part for selecting the corresponding TX queue */
#define AC2UP(_ac) ( \
((_ac) == WME_AC_VO) ? 6 : \
((_ac) == WME_AC_VI) ? 5 : \
bool support_ht;
- // HT related elements
+ /* HT related elements */
u8 ht_cap_buf[32];
u16 ht_cap_len;
u8 ht_info_buf[32];
u16 ht_info_len;
HT_SPEC_VER ht_spec_ver;
- //HT_CAPABILITY_ELE bdHTCapEle;
- //HT_INFORMATION_ELE bdHTInfoEle;
+ /* HT_CAPABILITY_ELE bdHTCapEle; */
+ /* HT_INFORMATION_ELE bdHTInfoEle; */
bool aggregation;
bool long_slot_time;
-}bss_ht, *pbss_ht;
+} bss_ht, *pbss_ht;
typedef enum _erp_t{
ERP_NonERPpresent = 0x01,
u8 ssid[IW_ESSID_MAX_SIZE + 1];
u8 ssid_len;
struct ieee80211_qos_data qos_data;
- //added by amy for LEAP
bool bWithAironetIE;
bool bCkipSupported;
bool bCcxRmEnable;
u16 CcxRmState[2];
- // CCXv4 S59, MBSSID.
+ /* CCXv4 S59, MBSSID. */
bool bMBssidValid;
u8 MBssidMask;
u8 MBssid[6];
- // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
+ /* CCX 2 S38, WLAN Device Version Number element. */
bool bWithCcxVerNum;
u8 BssCcxVerNumber;
/* These are network statistics */
u8 dtim_data;
u32 last_dtim_sta_time[2];
- //appeded for QoS
+ /* appeded for QoS */
u8 wmm_info;
struct ieee80211_wmm_ac_param wmm_param[4];
u8 QoS_Enable;
#ifdef THOMAS_TURBO
- u8 Turbo_Enable;//enable turbo mode, added by thomas
+ u8 Turbo_Enable;/* enable turbo mode, added by thomas */
#endif
#ifdef ENABLE_DOT11D
u16 CountryIeLen;
u8 CountryIeBuf[MAX_IE_LEN];
#endif
- // HT Related, by amy, 2008.04.29
+ /* HT Related */
BSS_HT bssht;
- // Add to handle broadcom AP management frame CCK rate.
+ /* Add to handle broadcom AP management frame CCK rate. */
bool broadcom_cap_exist;
bool ralink_cap_exist;
bool atheros_cap_exist;
bool cisco_cap_exist;
bool unknown_cap_exist;
-// u8 berp_info;
bool berp_info_valid;
bool buseprotection;
- //put at the end of the structure.
+ /* put at the end of the structure. */
struct list_head list;
};
typedef struct tx_pending_t{
int frag;
struct ieee80211_txb *txb;
-}tx_pending_t;
+} tx_pending_t;
-typedef struct _bandwidth_autoswitch
-{
+typedef struct _bandwidth_autoswitch {
long threshold_20Mhzto40Mhz;
long threshold_40Mhzto20Mhz;
bool bforced_tx20Mhz;
bool bautoswitch_enable;
-}bandwidth_autoswitch,*pbandwidth_autoswitch;
+} bandwidth_autoswitch, *pbandwidth_autoswitch;
-//added by amy for order
#define REORDER_WIN_SIZE 128
#define REORDER_ENTRY_NUM 128
-typedef struct _RX_REORDER_ENTRY
-{
+typedef struct _RX_REORDER_ENTRY {
struct list_head List;
u16 SeqNum;
- struct ieee80211_rxb* prxb;
+ struct ieee80211_rxb *prxb;
} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
-//added by amy for order
-typedef enum _Fsync_State{
+
+typedef enum _Fsync_State {
Default_Fsync,
HW_Fsync,
SW_Fsync
-}Fsync_State;
+} Fsync_State;
-// Power save mode configured.
-typedef enum _RT_PS_MODE
-{
- eActive, // Active/Continuous access.
- eMaxPs, // Max power save mode.
- eFastPs // Fast power save mode.
-}RT_PS_MODE;
+/* Power save mode configured. */
+typedef enum _RT_PS_MODE {
+ eActive, /* Active/Continuous access. */
+ eMaxPs, /* Max power save mode. */
+ eFastPs /* Fast power save mode. */
+} RT_PS_MODE;
-typedef enum _IPS_CALLBACK_FUNCION
-{
+typedef enum _IPS_CALLBACK_FUNCION {
IPS_CALLBACK_NONE = 0,
IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
IPS_CALLBACK_JOIN_REQUEST = 2,
-}IPS_CALLBACK_FUNCION;
+} IPS_CALLBACK_FUNCION;
-typedef enum _RT_JOIN_ACTION{
+typedef enum _RT_JOIN_ACTION {
RT_JOIN_INFRA = 1,
RT_JOIN_IBSS = 2,
RT_START_IBSS = 3,
RT_NO_ACTION = 4,
-}RT_JOIN_ACTION;
+} RT_JOIN_ACTION;
-typedef struct _IbssParms{
+typedef struct _IbssParms {
u16 atimWin;
-}IbssParms, *PIbssParms;
-#define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
+} IbssParms, *PIbssParms;
+#define MAX_NUM_RATES 264 /* Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko. */
-// RF state.
-typedef enum _RT_RF_POWER_STATE
-{
+/* RF state. */
+typedef enum _RT_RF_POWER_STATE {
eRfOn,
eRfSleep,
eRfOff
-}RT_RF_POWER_STATE;
+} RT_RF_POWER_STATE;
-typedef struct _RT_POWER_SAVE_CONTROL
-{
+typedef struct _RT_POWER_SAVE_CONTROL {
- //
- // Inactive Power Save(IPS) : Disable RF when disconnected
- //
+ /* Inactive Power Save(IPS) : Disable RF when disconnected */
bool bInactivePs;
bool bIPSModeBackup;
bool bSwRfProcessing;
struct work_struct InactivePsWorkItem;
struct timer_list InactivePsTimer;
- // Return point for join action
+ /* Return point for join action */
IPS_CALLBACK_FUNCION ReturnPoint;
- // Recored Parameters for rescheduled JoinRequest
+ /* Recored Parameters for rescheduled JoinRequest */
bool bTmpBssDesc;
RT_JOIN_ACTION tmpJoinAction;
struct ieee80211_network tmpBssDesc;
- // Recored Parameters for rescheduled MgntLinkRequest
+ /* Recored Parameters for rescheduled MgntLinkRequest */
bool bTmpScanOnly;
bool bTmpActiveScan;
bool bTmpFilterHiddenAP;
IbssParms tmpIbpm;
bool bTmpIbpm;
- //
- // Leisre Poswer Save : Disable RF if connected but traffic is not busy
- //
+ /* Leisre Poswer Save : Disable RF if connected but traffic is not busy */
bool bLeisurePs;
-}RT_POWER_SAVE_CONTROL,*PRT_POWER_SAVE_CONTROL;
+} RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
typedef u32 RT_RF_CHANGE_SOURCE;
#define RF_CHANGE_BY_SW BIT31
#define RF_CHANGE_BY_HW BIT30
#define RF_CHANGE_BY_PS BIT29
#define RF_CHANGE_BY_IPS BIT28
-#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+#define RF_CHANGE_BY_INIT 0 /* Do not change the RFOff reason. */
#ifdef ENABLE_DOT11D
-typedef enum
-{
+typedef enum {
COUNTRY_CODE_FCC = 0,
COUNTRY_CODE_IC = 1,
COUNTRY_CODE_ETSI = 2,
COUNTRY_CODE_TELEC,
COUNTRY_CODE_MIC,
COUNTRY_CODE_GLOBAL_DOMAIN
-}country_code_type_t;
+} country_code_type_t;
#endif
#define RT_MAX_LD_SLOT_NUM 10
-typedef struct _RT_LINK_DETECT_T{
+typedef struct _RT_LINK_DETECT_T {
u32 NumRecvBcnInPeriod;
u32 NumRecvDataInPeriod;
- u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; // number of Rx beacon / CheckForHang_period to determine link status
- u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; // number of Rx data / CheckForHang_period to determine link status
- u16 SlotNum; // number of CheckForHang period to determine link status
+ u32 RxBcnNum[RT_MAX_LD_SLOT_NUM]; /* number of Rx beacon / CheckForHang_period to determine link status */
+ u32 RxDataNum[RT_MAX_LD_SLOT_NUM]; /* number of Rx data / CheckForHang_period to determine link status */
+ u16 SlotNum; /* number of CheckForHang period to determine link status */
u16 SlotIndex;
u32 NumTxOkInPeriod;
u32 NumRxOkInPeriod;
bool bBusyTraffic;
-}RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
+} RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
struct ieee80211_device {
struct net_device *dev;
struct ieee80211_security sec;
- //hw security related
-// u8 hwsec_support; //support?
- u8 hwsec_active; //hw security active.
+ /* hw security related */
+ u8 hwsec_active; /* hw security active. */
bool is_silent_reset;
bool ieee_up;
- //added by amy
bool bSupportRemoteWakeUp;
- RT_PS_MODE dot11PowerSaveMode; // Power save mode configured.
+ RT_PS_MODE dot11PowerSaveMode; /* Power save mode configured. */
bool actscanning;
bool beinretry;
RT_RF_POWER_STATE eRFPowerState;
RT_RF_CHANGE_SOURCE RfOffReason;
bool is_set_key;
- //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
+ /* 11n spec related I wonder if These info structure need to be moved out of ieee80211_device */
- //11n HT below
+ /* 11n HT below */
PRT_HIGH_THROUGHPUT pHTInfo;
- //struct timer_list SwBwTimer;
-// spinlock_t chnlop_spinlock;
spinlock_t bw_spinlock;
spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
- //the way fill this is the same as in the IE
- u8 Regdot11HTOperationalRateSet[16]; //use RATR format
- u8 dot11HTOperationalRateSet[16]; //use RATR format
+ /* for HT operation rate set. we use this one for HT data rate to
+ * separate different descriptors
+ * the way fill this is the same as in the IE
+ */
+ u8 Regdot11HTOperationalRateSet[16]; /* use RATR format */
+ u8 dot11HTOperationalRateSet[16]; /* use RATR format */
u8 RegHTSuppRateSet[16];
u8 HTCurrentOperaRate;
u8 HTHighestOperaRate;
- //wb added for rate operation mode to firmware
+ /* wb added for rate operation mode to firmware */
u8 bTxDisableRateFallBack;
u8 bTxUseDriverAssingedRate;
atomic_t atm_chnlop;
atomic_t atm_swbw;
-// u8 HTHighestOperaRate;
-// u8 HTCurrentOperaRate;
- // 802.11e and WMM Traffic Stream Info (TX)
+ /* 802.11e and WMM Traffic Stream Info (TX) */
struct list_head Tx_TS_Admit_List;
struct list_head Tx_TS_Pending_List;
struct list_head Tx_TS_Unused_List;
TX_TS_RECORD TxTsRecord[TOTAL_TS_NUM];
- // 802.11e and WMM Traffic Stream Info (RX)
+ /* 802.11e and WMM Traffic Stream Info (RX) */
struct list_head Rx_TS_Admit_List;
struct list_head Rx_TS_Pending_List;
struct list_head Rx_TS_Unused_List;
RX_TS_RECORD RxTsRecord[TOTAL_TS_NUM];
-//#ifdef TO_DO_LIST
RX_REORDER_ENTRY RxReorderEntry[128];
struct list_head RxReorder_Unused_List;
-//#endif
- // Qos related. Added by Annie, 2005-11-01.
-// PSTA_QOS pStaQos;
- u8 ForcedPriority; // Force per-packet priority 1~7. (default: 0, not to force it.)
+ /* Qos related. */
+/* PSTA_QOS pStaQos; */
+ u8 ForcedPriority; /* Force per-packet priority 1~7. (default: 0, not to force it.) */
/* Bookkeeping structures */
* with RX of broad/multicast frames */
/* Fragmentation structures */
- // each streaming contain a entry
+ /* each streaming contain a entry */
struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
unsigned int frag_next_idx[17];
u16 fts; /* Fragmentation Threshold */
u16 prev_seq_ctl; /* used to drop duplicate frames */
/* map of allowed channels. 0 is dummy */
- // FIXME: remeber to default to a basic channel plan depending of the PHY type
+ /* FIXME: remeber to default to a basic channel plan depending of the PHY type */
#ifdef ENABLE_DOT11D
- void* pDot11dInfo;
+ void *pDot11dInfo;
bool bGlobalDomain;
#else
int channel_map[MAX_CHANNEL_NUMBER+1];
#endif
int rate; /* current rate */
int basic_rate;
- //FIXME: pleace callback, see if redundant with softmac_features
+ /* FIXME: pleace callback, see if redundant with softmac_features */
short active_scan;
/* this contains flags for selectively enable softmac support */
short wap_set;
short ssid_set;
- u8 wpax_type_set; //{added by David, 2006.9.28}
- u32 wpax_type_notify; //{added by David, 2006.9.26}
+ u8 wpax_type_set;
+ u32 wpax_type_notify;
/* QoS related flag */
char init_wmmparam_flag;
struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
int mgmt_queue_head;
int mgmt_queue_tail;
-//{ added for rtl819x
+/* added for rtl819x */
#define IEEE80211_QUEUE_LIMIT 128
u8 AsocRetryCount;
unsigned int hw_header;
struct sk_buff_head skb_drv_aggQ[MAX_QUEUE_SIZE];
u32 sta_edca_param[4];
bool aggregation;
- // Enable/Disable Rx immediate BA capability.
+ /* Enable/Disable Rx immediate BA capability. */
bool enable_rx_imm_BA;
bool bibsscoordinator;
- //+by amy for DM ,080515
- //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
+ /*+by amy for DM ,080515 */
+ /* Dynamic Tx power for near/far range enable/Disable */
bool bdynamic_txpower_enable;
bool bCTSToSelfEnable;
u8 fsync_rssi_threshold;
bool bfsync_enable;
- u8 fsync_multiple_timeinterval; // FsyncMultipleTimeInterval * FsyncTimeInterval
- u32 fsync_firstdiff_ratethreshold; // low threshold
- u32 fsync_seconddiff_ratethreshold; // decrease threshold
+ u8 fsync_multiple_timeinterval; /* FsyncMultipleTimeInterval * FsyncTimeInterval */
+ u32 fsync_firstdiff_ratethreshold; /* low threshold */
+ u32 fsync_seconddiff_ratethreshold; /* decrease threshold */
Fsync_State fsync_state;
bool bis_any_nonbepkts;
- //20Mhz 40Mhz AutoSwitch Threshold
+ /* 20Mhz 40Mhz AutoSwitch Threshold */
bandwidth_autoswitch bandwidth_auto_switch;
- //for txpower tracking
+ /* for txpower tracking */
bool FwRWRF;
- //added by amy for AP roaming
+ /* added by amy for AP roaming */
RT_LINK_DETECT_T LinkDetectInfo;
- //added by amy for ps
+ /* added by amy for ps */
RT_POWER_SAVE_CONTROL PowerSaveControl;
-//}
/* used if IEEE_SOFTMAC_TX_QUEUE is set */
struct tx_pending_t tx_pending;
struct delayed_work start_ibss_wq;
struct work_struct wx_sync_scan_wq;
struct workqueue_struct *wq;
- // Qos related. Added by Annie, 2005-11-01.
- //STA_QOS StaQos;
-
- //u32 STA_EDCA_PARAM[4];
- //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
+ /* Qos related. Added by Annie, 2005-11-01. */
+ /* STA_QOS StaQos; */
/* Callback functions */
struct net_device *dev);
int (*reset_port)(struct net_device *dev);
- int (*is_queue_full) (struct net_device * dev, int pri);
+ int (*is_queue_full) (struct net_device *dev, int pri);
- int (*handle_management) (struct net_device * dev,
- struct ieee80211_network * network, u16 type);
+ int (*handle_management) (struct net_device *dev,
+ struct ieee80211_network *network, u16 type);
int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
/* Softmac-generated frames (mamagement) are TXed via this
* This function can't sleep.
*/
void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
- struct net_device *dev,int rate);
+ struct net_device *dev, int rate);
/* stops the HW queue for DATA frames. Useful to avoid
* waste time to TX data frame when we are reassociating
* This function can sleep. the driver should ensure
* the radio has been swithced before return.
*/
- void (*set_chan)(struct net_device *dev,short ch);
+ void (*set_chan)(struct net_device *dev, short ch);
/* These are not used if the ieee stack takes care of
* scanning (IEEE_SOFTMAC_SCAN feature set).
* stop_send_bacons is NOT guaranteed to be called only
* after start_send_beacons.
*/
- void (*start_send_beacons) (struct net_device *dev,u16 tx_rate);
+ void (*start_send_beacons) (struct net_device *dev, u16 tx_rate);
void (*stop_send_beacons) (struct net_device *dev);
/* power save mode related */
void (*ps_request_tx_ack) (struct net_device *dev);
void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
short (*ps_is_queue_empty) (struct net_device *dev);
- int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
- int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
+ int (*handle_beacon) (struct net_device *dev, struct ieee80211_beacon *beacon, struct ieee80211_network *network);
+ int (*handle_assoc_response) (struct net_device *dev, struct ieee80211_assoc_response_frame *resp, struct ieee80211_network *network);
/* check whether Tx hw resouce available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
- //added by wb for HT related
-// void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
+ /* added by wb for HT related */
void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-// void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
- bool (*GetNmodeSupportBySecCfg)(struct net_device* dev);
- void (*SetWirelessMode)(struct net_device* dev, u8 wireless_mode);
- bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device* dev);
+ bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);
+ void (*SetWirelessMode)(struct net_device *dev, u8 wireless_mode);
+ bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device *dev);
void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
/* This must be the last item so that it points to the data
case IEEE80211_FTYPE_DATA:
if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
- if(IEEE80211_QOS_HAS_SEQ(fc))
+ if (IEEE80211_QOS_HAS_SEQ(fc))
hdrlen += 2; /* QOS ctrl*/
break;
case IEEE80211_FTYPE_CTL:
#if WIRELESS_EXT >= 18
extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
struct iw_request_info *info,
- union iwreq_data* wrqu, char *extra);
+ union iwreq_data *wrqu, char *extra);
extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
struct iw_request_info *info,
- union iwreq_data* wrqu, char *extra);
+ union iwreq_data *wrqu, char *extra);
extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
struct iw_request_info *info,
struct iw_param *data, char *extra);
union iwreq_data *awrq,
char *extra);
-extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b);
+extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
+ struct iw_request_info *a,
+ union iwreq_data *wrqu, char *b);
extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
struct iw_request_info *info,
extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
union iwreq_data *wrqu, char *b);
-//extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra);
-//HT
-#define MAX_RECEIVE_BUFFER_SIZE 9100 //
-extern void HTDebugHTCapability(u8* CapIE, u8* TitleString );
-extern void HTDebugHTInfo(u8* InfoIE, u8* TitleString);
-
-void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-extern void HTUpdateDefaultSetting(struct ieee80211_device* ieee);
-extern void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u8* len, u8 isEncrypt);
-extern void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* len, u8 isEncrypt);
-extern void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg, u8* len);
+/* HT */
+#define MAX_RECEIVE_BUFFER_SIZE 9100
+extern void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
+extern void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
+
+void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
+extern void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
+extern void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 isEncrypt);
+extern void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 isEncrypt);
+extern void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len);
extern void HTOnAssocRsp(struct ieee80211_device *ieee);
-extern void HTInitializeHTInfo(struct ieee80211_device* ieee);
+extern void HTInitializeHTInfo(struct ieee80211_device *ieee);
extern void HTInitializeBssDesc(PBSS_HT pBssHT);
-extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
-extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device* ieee, struct ieee80211_network * pNetwork);
-extern u8 HTGetHighestMCSRate(struct ieee80211_device* ieee, u8* pMCSRateSet, u8* pMCSFilter);
+extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork);
+extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork);
+extern u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter);
extern u8 MCS_FILTER_ALL[];
extern u16 MCS_DATA_RATE[2][2][77] ;
-extern u8 HTCCheck(struct ieee80211_device* ieee, u8* pFrame);
-//extern void HTSetConnectBwModeCallback(unsigned long data);
+extern u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo);
-extern bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee);
-extern u16 HTHalfMcsToDataRate(struct ieee80211_device* ieee, u8 nMcsRate);
-extern u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate);
-extern u16 TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate);
-//function in BAPROC.c
-extern int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb);
-extern int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb);
-extern int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb);
-extern void TsInitAddBA( struct ieee80211_device* ieee, PTX_TS_RECORD pTS, u8 Policy, u8 bOverwritePending);
-extern void TsInitDelBA( struct ieee80211_device* ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
+extern bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
+extern u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
+extern u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
+extern u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
+/* function in BAPROC.c */
+extern int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb);
+extern int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb);
+extern int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb);
+extern void TsInitAddBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTS, u8 Policy, u8 bOverwritePending);
+extern void TsInitDelBA(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
extern void BaSetupTimeOut(unsigned long data);
extern void TxBaInactTimeout(unsigned long data);
extern void RxBaInactTimeout(unsigned long data);
-extern void ResetBaEntry( PBA_RECORD pBA);
-//function in TS.c
+extern void ResetBaEntry(PBA_RECORD pBA);
+/* function in TS.c */
extern bool GetTs(
- struct ieee80211_device* ieee,
- PTS_COMMON_INFO *ppTS,
- u8* Addr,
+ struct ieee80211_device *ieee,
+ PTS_COMMON_INFO *ppTS,
+ u8 *Addr,
u8 TID,
- TR_SELECT TxRxSelect, //Rx:1, Tx:0
+ TR_SELECT TxRxSelect, /* Rx:1, Tx:0 */
bool bAddNewTs
);
extern void TSInitialize(struct ieee80211_device *ieee);
-extern void TsStartAddBaProcess(struct ieee80211_device* ieee, PTX_TS_RECORD pTxTS);
-extern void RemovePeerTS(struct ieee80211_device* ieee, u8* Addr);
-extern void RemoveAllTS(struct ieee80211_device* ieee);
+extern void TsStartAddBaProcess(struct ieee80211_device *ieee, PTX_TS_RECORD pTxTS);
+extern void RemovePeerTS(struct ieee80211_device *ieee, u8 *Addr);
+extern void RemoveAllTS(struct ieee80211_device *ieee);
void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
extern const long ieee80211_wlan_frequencies[];
return ieee->scans;
}
-static inline const char *escape_essid(const char *essid, u8 essid_len) {
+static inline const char *escape_essid(const char *essid, u8 essid_len)
+{
static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
const char *s = essid;
char *d = escaped;
struct ieee80211_network *network,
struct ieee80211_rx_stats *stats);
-void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb** prxbIndicateArray,u8 index);
+void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb **prxbIndicateArray, u8 index);
#define RT_ASOC_RETRY_LIMIT 5
#endif /* IEEE80211_H */
projects / linux-flexiantxendom0-3.2.10.git / blobdiff