REPLY_TX = 0x1c,
REPLY_RATE_SCALE = 0x47, /* 3945 only */
REPLY_LEDS_CMD = 0x48,
- REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
+ REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 and up */
/* WiMAX coexistence */
COEX_PRIORITY_TABLE_CMD = 0x5a, /* for 5000 series and up */
*
* Entries without timestamps contain only event_id and data.
*
+ *
* 2) error_event_table_ptr indicates base of the error log. This contains
- * information about any uCode error that occurs. For 4965, the format
+ * information about any uCode error that occurs. For agn, the format
* of the error log is:
*
* __le32 valid; (nonzero) valid, (0) log is empty
* __le32 bcon_time; beacon timer
* __le32 tsf_low; network timestamp function timer
* __le32 tsf_hi; network timestamp function timer
+ * __le32 gp1; GP1 timer register
+ * __le32 gp2; GP2 timer register
+ * __le32 gp3; GP3 timer register
+ * __le32 ucode_ver; uCode version
+ * __le32 hw_ver; HW Silicon version
+ * __le32 brd_ver; HW board version
+ * __le32 log_pc; log program counter
+ * __le32 frame_ptr; frame pointer
+ * __le32 stack_ptr; stack pointer
+ * __le32 hcmd; last host command
+ * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag
+ * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag
+ * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag
+ * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag
+ * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt
+ * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT
+ * __le32 wait_event; wait event() caller address
+ * __le32 l2p_control; L2pControlField
+ * __le32 l2p_duration; L2pDurationField
+ * __le32 l2p_mhvalid; L2pMhValidBits
+ * __le32 l2p_addr_match; L2pAddrMatchStat
+ * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
+ * __le32 u_timestamp; indicate when the date and time of the compilation
+ * __le32 reserved;
*
* The Linux driver can print both logs to the system log when a uCode error
* occurs.
/* 1: Ignore Bluetooth priority for this frame.
* 0: Delay Tx until Bluetooth device is done (normal usage). */
-#define TX_CMD_FLG_BT_DIS_MSK cpu_to_le32(1 << 12)
+#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12)
/* 1: uCode overrides sequence control field in MAC header.
* 0: Driver provides sequence control field in MAC header.
struct ieee80211_hdr hdr[0];
} __attribute__ ((packed));
-/* TX command response is sent after *all* transmission attempts.
+/* TX command response is sent after *3945* transmission attempts.
*
* NOTES:
*
* control line. Receiving is still allowed in this case.
*/
enum {
+ TX_3945_STATUS_SUCCESS = 0x01,
+ TX_3945_STATUS_DIRECT_DONE = 0x02,
+ TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
+ TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
+ TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+ TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
+ TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
+ TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+ TX_3945_STATUS_FAIL_DEST_PS = 0x88,
+ TX_3945_STATUS_FAIL_ABORTED = 0x89,
+ TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
+ TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
+ TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+ TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
+ TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+ TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+ TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
+ TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+/*
+ * TX command response is sent after *agn* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
+enum {
TX_STATUS_SUCCESS = 0x01,
TX_STATUS_DIRECT_DONE = 0x02,
+ /* postpone TX */
+ TX_STATUS_POSTPONE_DELAY = 0x40,
+ TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+ TX_STATUS_POSTPONE_BT_PRIO = 0x42,
+ TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+ TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+ /* abort TX */
+ TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
TX_STATUS_FAIL_LONG_LIMIT = 0x83,
TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
- TX_STATUS_FAIL_MGMNT_ABORT = 0x85,
- TX_STATUS_FAIL_NEXT_FRAG = 0x86,
+ TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+ TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
TX_STATUS_FAIL_DEST_PS = 0x88,
- TX_STATUS_FAIL_ABORTED = 0x89,
+ TX_STATUS_FAIL_HOST_ABORTED = 0x89,
TX_STATUS_FAIL_BT_RETRY = 0x8a,
TX_STATUS_FAIL_STA_INVALID = 0x8b,
TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
TX_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+ TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
- TX_STATUS_FAIL_TX_LOCKED = 0x90,
- TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+ /* uCode drop due to FW drop request */
+ TX_STATUS_FAIL_FW_DROP = 0x90,
+ /*
+ * uCode drop due to station color mismatch
+ * between tx command and station table
+ */
+ TX_STATUS_FAIL_STA_COLOR_MISMATCH_DROP = 0x91,
};
#define TX_PACKET_MODE_REGULAR 0x0000
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
};
-static inline u32 iwl_tx_status_to_mac80211(u32 status)
-{
- status &= TX_STATUS_MSK;
-
- switch (status) {
- case TX_STATUS_SUCCESS:
- case TX_STATUS_DIRECT_DONE:
- return IEEE80211_TX_STAT_ACK;
- case TX_STATUS_FAIL_DEST_PS:
- return IEEE80211_TX_STAT_TX_FILTERED;
- default:
- return 0;
- }
-}
-
-static inline bool iwl_is_tx_success(u32 status)
-{
- status &= TX_STATUS_MSK;
- return (status == TX_STATUS_SUCCESS) ||
- (status == TX_STATUS_DIRECT_DONE);
-}
-
-
-
/* *******************************
* TX aggregation status
******************************* */
#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
#define IWL_MAX_SCAN_SIZE 1024
#define IWL_MAX_CMD_SIZE 4096
-#define IWL_MAX_PROBE_REQUEST 200
/*
* REPLY_SCAN_CMD = 0x80 (command)
__le32 cts_timeout_collision;
__le32 ack_or_ba_timeout_collision;
struct statistics_tx_non_phy_agg agg;
+ /*
+ * "tx_power" are optional parameters provided by uCode,
+ * 6000 series is the only device provide the information,
+ * Those are reserved fields for all the other devices
+ */
struct statistics_tx_power tx_power;
__le32 reserved1;
} __attribute__ ((packed));
projects / linux-flexiantxendom0-3.2.10.git / blobdiff