#include <linux/idr.h>
#include <linux/kthread.h>
#include <../drivers/ata/ahci.h>
+#include <linux/export.h>
#include "mtip32xx.h"
#define HW_CMD_SLOT_SZ (MTIP_MAX_COMMAND_SLOTS * 32)
#define HW_PORT_PRIV_DMA_SZ \
(HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ)
+#define HOST_CAP_NZDMA (1 << 19)
#define HOST_HSORG 0xFC
#define HSORG_DISABLE_SLOTGRP_INTR (1<<24)
#define HSORG_DISABLE_SLOTGRP_PXIS (1<<16)
int group = 0, commandslot = 0, commandindex = 0;
struct mtip_cmd *command;
struct mtip_port *port = dd->port;
+ static int in_progress;
+
+ if (in_progress)
+ return;
+
+ in_progress = 1;
for (group = 0; group < 4; group++) {
for (commandslot = 0; commandslot < 32; commandslot++) {
up(&port->cmd_slot);
- atomic_set(&dd->drv_cleanup_done, true);
+ set_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag);
+ in_progress = 0;
}
/*
&& time_before(jiffies, timeout))
mdelay(1);
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))
+ return -1;
+
if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
return -1;
port->cmd_issue[MTIP_TAG_INDEX(tag)]);
spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
+
+ /* Set the command's timeout value.*/
+ port->commands[tag].comp_time = jiffies + msecs_to_jiffies(
+ MTIP_NCQ_COMMAND_TIMEOUT_MS);
}
/*
writel(0xFFFFFFFF, port->completed[i]);
/* Clear any pending interrupts for this port */
- writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);
+ writel(readl(port->dd->mmio + PORT_IRQ_STAT),
+ port->dd->mmio + PORT_IRQ_STAT);
+
+ /* Clear any pending interrupts on the HBA. */
+ writel(readl(port->dd->mmio + HOST_IRQ_STAT),
+ port->dd->mmio + HOST_IRQ_STAT);
/* Enable port interrupts */
writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
&& time_before(jiffies, timeout))
;
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+ return;
+
/*
* Chip quirk: escalate to hba reset if
* PxCMD.CR not clear after 500 ms
while (time_before(jiffies, timeout))
;
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+ return;
+
/* Clear PxSCTL.DET */
writel(readl(port->mmio + PORT_SCR_CTL) & ~1,
port->mmio + PORT_SCR_CTL);
&& time_before(jiffies, timeout))
;
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+ return;
+
if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
dev_warn(&port->dd->pdev->dev,
"COM reset failed\n");
- /* Clear SError, the PxSERR.DIAG.x should be set so clear it */
- writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);
+ mtip_init_port(port);
+ mtip_start_port(port);
- /* Enable the DMA engine */
- mtip_enable_engine(port, 1);
+}
+
+/*
+ * Helper function for tag logging
+ */
+static void print_tags(struct driver_data *dd,
+ char *msg,
+ unsigned long *tagbits,
+ int cnt)
+{
+ unsigned char tagmap[128];
+ int group, tagmap_len = 0;
+
+ memset(tagmap, 0, sizeof(tagmap));
+ for (group = SLOTBITS_IN_LONGS; group > 0; group--)
+ tagmap_len = sprintf(tagmap + tagmap_len, "%016lX ",
+ tagbits[group-1]);
+ dev_warn(&dd->pdev->dev,
+ "%d command(s) %s: tagmap [%s]", cnt, msg, tagmap);
}
/*
int tag, cmdto_cnt = 0;
unsigned int bit, group;
unsigned int num_command_slots = port->dd->slot_groups * 32;
+ unsigned long to, tagaccum[SLOTBITS_IN_LONGS];
if (unlikely(!port))
return;
- if (atomic_read(&port->dd->resumeflag) == true) {
+ if (test_bit(MTIP_DDF_RESUME_BIT, &port->dd->dd_flag)) {
mod_timer(&port->cmd_timer,
jiffies + msecs_to_jiffies(30000));
return;
}
+ /* clear the tag accumulator */
+ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
for (tag = 0; tag < num_command_slots; tag++) {
/*
command = &port->commands[tag];
fis = (struct host_to_dev_fis *) command->command;
- dev_warn(&port->dd->pdev->dev,
- "Timeout for command tag %d\n", tag);
-
+ set_bit(tag, tagaccum);
cmdto_cnt++;
if (cmdto_cnt == 1)
- set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+ set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
/*
* Clear the completed bit. This should prevent
}
}
- if (cmdto_cnt) {
- dev_warn(&port->dd->pdev->dev,
- "%d commands timed out: restarting port",
- cmdto_cnt);
+ if (cmdto_cnt && !test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
+ print_tags(port->dd, "timed out", tagaccum, cmdto_cnt);
+
mtip_restart_port(port);
- clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
wake_up_interruptible(&port->svc_wait);
}
+ if (port->ic_pause_timer) {
+ to = port->ic_pause_timer + msecs_to_jiffies(1000);
+ if (time_after(jiffies, to)) {
+ if (!test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags)) {
+ port->ic_pause_timer = 0;
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+ wake_up_interruptible(&port->svc_wait);
+ }
+
+
+ }
+ }
+
/* Restart the timer */
mod_timer(&port->cmd_timer,
jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
complete(waiting);
}
-/*
- * Helper function for tag logging
- */
-static void print_tags(struct driver_data *dd,
- char *msg,
- unsigned long *tagbits)
+static void mtip_null_completion(struct mtip_port *port,
+ int tag,
+ void *data,
+ int status)
{
- unsigned int tag, count = 0;
-
- for (tag = 0; tag < (dd->slot_groups) * 32; tag++) {
- if (test_bit(tag, tagbits))
- count++;
- }
- if (count)
- dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count);
+ return;
}
+static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
+ dma_addr_t buffer_dma, unsigned int sectors);
+static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
+ struct smart_attr *attrib);
/*
* Handle an error.
*
*/
static void mtip_handle_tfe(struct driver_data *dd)
{
- int group, tag, bit, reissue;
+ int group, tag, bit, reissue, rv;
struct mtip_port *port;
- struct mtip_cmd *command;
+ struct mtip_cmd *cmd;
u32 completed;
struct host_to_dev_fis *fis;
unsigned long tagaccum[SLOTBITS_IN_LONGS];
+ unsigned int cmd_cnt = 0;
+ unsigned char *buf;
+ char *fail_reason = NULL;
+ int fail_all_ncq_write = 0, fail_all_ncq_cmds = 0;
dev_warn(&dd->pdev->dev, "Taskfile error\n");
/* Stop the timer to prevent command timeouts. */
del_timer(&port->cmd_timer);
+ /* clear the tag accumulator */
+ memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
+
/* Set eh_active */
- set_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+ set_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
/* Loop through all the groups */
for (group = 0; group < dd->slot_groups; group++) {
/* clear completed status register in the hardware.*/
writel(completed, port->completed[group]);
- /* clear the tag accumulator */
- memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
-
/* Process successfully completed commands */
for (bit = 0; bit < 32 && completed; bit++) {
if (!(completed & (1<<bit)))
if (tag == MTIP_TAG_INTERNAL)
continue;
- command = &port->commands[tag];
- if (likely(command->comp_func)) {
+ cmd = &port->commands[tag];
+ if (likely(cmd->comp_func)) {
set_bit(tag, tagaccum);
- atomic_set(&port->commands[tag].active, 0);
- command->comp_func(port,
+ cmd_cnt++;
+ atomic_set(&cmd->active, 0);
+ cmd->comp_func(port,
tag,
- command->comp_data,
+ cmd->comp_data,
0);
} else {
dev_err(&port->dd->pdev->dev,
}
}
}
- print_tags(dd, "TFE tags completed:", tagaccum);
+
+ print_tags(dd, "completed (TFE)", tagaccum, cmd_cnt);
/* Restart the port */
mdelay(20);
mtip_restart_port(port);
+ /* Trying to determine the cause of the error */
+ rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
+ dd->port->log_buf,
+ dd->port->log_buf_dma, 1);
+ if (rv) {
+ dev_warn(&dd->pdev->dev,
+ "Error in READ LOG EXT (10h) command\n");
+ /* non-critical error, don't fail the load */
+ } else {
+ buf = (unsigned char *)dd->port->log_buf;
+ if (buf[259] & 0x1) {
+ dev_info(&dd->pdev->dev,
+ "Write protect bit is set.\n");
+ set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
+ fail_all_ncq_write = 1;
+ fail_reason = "write protect";
+ }
+ if (buf[288] == 0xF7) {
+ dev_info(&dd->pdev->dev,
+ "Exceeded Tmax, drive in thermal shutdown.\n");
+ set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
+ fail_all_ncq_cmds = 1;
+ fail_reason = "thermal shutdown";
+ }
+ if (buf[288] == 0xBF) {
+ dev_info(&dd->pdev->dev,
+ "Drive indicates rebuild has failed.\n");
+ fail_all_ncq_cmds = 1;
+ fail_reason = "rebuild failed";
+ }
+ }
+
/* clear the tag accumulator */
memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));
for (bit = 0; bit < 32; bit++) {
reissue = 1;
tag = (group << 5) + bit;
+ cmd = &port->commands[tag];
/* If the active bit is set re-issue the command */
- if (atomic_read(&port->commands[tag].active) == 0)
+ if (atomic_read(&cmd->active) == 0)
continue;
- fis = (struct host_to_dev_fis *)
- port->commands[tag].command;
+ fis = (struct host_to_dev_fis *)cmd->command;
/* Should re-issue? */
if (tag == MTIP_TAG_INTERNAL ||
fis->command == ATA_CMD_SET_FEATURES)
reissue = 0;
+ else {
+ if (fail_all_ncq_cmds ||
+ (fail_all_ncq_write &&
+ fis->command == ATA_CMD_FPDMA_WRITE)) {
+ dev_warn(&dd->pdev->dev,
+ " Fail: %s w/tag %d [%s].\n",
+ fis->command == ATA_CMD_FPDMA_WRITE ?
+ "write" : "read",
+ tag,
+ fail_reason != NULL ?
+ fail_reason : "unknown");
+ atomic_set(&cmd->active, 0);
+ if (cmd->comp_func) {
+ cmd->comp_func(port, tag,
+ cmd->comp_data,
+ -ENODATA);
+ }
+ continue;
+ }
+ }
/*
* First check if this command has
* exceeded its retries.
*/
- if (reissue &&
- (port->commands[tag].retries-- > 0)) {
+ if (reissue && (cmd->retries-- > 0)) {
set_bit(tag, tagaccum);
- /* Update the timeout value. */
- port->commands[tag].comp_time =
- jiffies + msecs_to_jiffies(
- MTIP_NCQ_COMMAND_TIMEOUT_MS);
/* Re-issue the command. */
mtip_issue_ncq_command(port, tag);
/* Retire a command that will not be reissued */
dev_warn(&port->dd->pdev->dev,
"retiring tag %d\n", tag);
- atomic_set(&port->commands[tag].active, 0);
+ atomic_set(&cmd->active, 0);
- if (port->commands[tag].comp_func)
- port->commands[tag].comp_func(
+ if (cmd->comp_func)
+ cmd->comp_func(
port,
tag,
- port->commands[tag].comp_data,
+ cmd->comp_data,
PORT_IRQ_TF_ERR);
else
dev_warn(&port->dd->pdev->dev,
tag);
}
}
- print_tags(dd, "TFE tags reissued:", tagaccum);
+ print_tags(dd, "reissued (TFE)", tagaccum, cmd_cnt);
/* clear eh_active */
- clear_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_EH_ACTIVE_BIT, &port->flags);
wake_up_interruptible(&port->svc_wait);
mod_timer(&port->cmd_timer,
struct mtip_port *port = dd->port;
struct mtip_cmd *cmd = &port->commands[MTIP_TAG_INTERNAL];
- if (test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) &&
+ if (test_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags) &&
(cmd != NULL) && !(readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL))) {
if (cmd->comp_func) {
}
}
- dev_warn(&dd->pdev->dev, "IRQ status 0x%x ignored.\n", port_stat);
-
return;
}
/* don't proceed further */
return IRQ_HANDLED;
}
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &dd->dd_flag))
+ return rv;
mtip_process_errors(dd, port_stat & PORT_IRQ_ERR);
}
port->cmd_issue[MTIP_TAG_INDEX(tag)]);
}
+static bool mtip_pause_ncq(struct mtip_port *port,
+ struct host_to_dev_fis *fis)
+{
+ struct host_to_dev_fis *reply;
+ unsigned long task_file_data;
+
+ reply = port->rxfis + RX_FIS_D2H_REG;
+ task_file_data = readl(port->mmio+PORT_TFDATA);
+
+ if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT))
+ return false;
+
+ if (fis->command == ATA_CMD_SEC_ERASE_PREP) {
+ set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = jiffies;
+ return true;
+ } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) &&
+ (fis->features == 0x03)) {
+ set_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = jiffies;
+ return true;
+ } else if ((fis->command == ATA_CMD_SEC_ERASE_UNIT) ||
+ ((fis->command == 0xFC) &&
+ (fis->features == 0x27 || fis->features == 0x72 ||
+ fis->features == 0x62 || fis->features == 0x26))) {
+ /* Com reset after secure erase or lowlevel format */
+ mtip_restart_port(port);
+ return false;
+ }
+
+ return false;
+}
+
/*
* Wait for port to quiesce
*
to = jiffies + msecs_to_jiffies(timeout);
do {
- if (test_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags) &&
- test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) {
+ if (test_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags) &&
+ test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
msleep(20);
continue; /* svc thd is actively issuing commands */
}
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+ return -EFAULT;
/*
* Ignore s_active bit 0 of array element 0.
* This bit will always be set
* -EAGAIN Time out waiting for command to complete.
*/
static int mtip_exec_internal_command(struct mtip_port *port,
- void *fis,
+ struct host_to_dev_fis *fis,
int fis_len,
dma_addr_t buffer,
int buf_len,
{
struct mtip_cmd_sg *command_sg;
DECLARE_COMPLETION_ONSTACK(wait);
- int rv = 0;
+ int rv = 0, ready2go = 1;
struct mtip_cmd *int_cmd = &port->commands[MTIP_TAG_INTERNAL];
+ unsigned long to;
/* Make sure the buffer is 8 byte aligned. This is asic specific. */
if (buffer & 0x00000007) {
return -EFAULT;
}
- /* Only one internal command should be running at a time */
- if (test_and_set_bit(MTIP_TAG_INTERNAL, port->allocated)) {
+ to = jiffies + msecs_to_jiffies(timeout);
+ do {
+ ready2go = !test_and_set_bit(MTIP_TAG_INTERNAL,
+ port->allocated);
+ if (ready2go)
+ break;
+ mdelay(100);
+ } while (time_before(jiffies, to));
+ if (!ready2go) {
dev_warn(&port->dd->pdev->dev,
- "Internal command already active\n");
+ "Internal cmd active. new cmd [%02X]\n", fis->command);
return -EBUSY;
}
- set_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
+ set_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+ port->ic_pause_timer = 0;
+
+ if (fis->command == ATA_CMD_SEC_ERASE_UNIT)
+ clear_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags);
+ else if (fis->command == ATA_CMD_DOWNLOAD_MICRO)
+ clear_bit(MTIP_PF_DM_ACTIVE_BIT, &port->flags);
if (atomic == GFP_KERNEL) {
- /* wait for io to complete if non atomic */
- if (mtip_quiesce_io(port, 5000) < 0) {
- dev_warn(&port->dd->pdev->dev,
- "Failed to quiesce IO\n");
- release_slot(port, MTIP_TAG_INTERNAL);
- clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
- wake_up_interruptible(&port->svc_wait);
- return -EBUSY;
+ if (fis->command != ATA_CMD_STANDBYNOW1) {
+ /* wait for io to complete if non atomic */
+ if (mtip_quiesce_io(port, 5000) < 0) {
+ dev_warn(&port->dd->pdev->dev,
+ "Failed to quiesce IO\n");
+ release_slot(port, MTIP_TAG_INTERNAL);
+ clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
+ wake_up_interruptible(&port->svc_wait);
+ return -EBUSY;
+ }
}
/* Set the completion function and data for the command. */
} else {
/* Clear completion - we're going to poll */
int_cmd->comp_data = NULL;
- int_cmd->comp_func = NULL;
+ int_cmd->comp_func = mtip_null_completion;
}
/* Copy the command to the command table */
"Internal command did not complete [%d] "
"within timeout of %lu ms\n",
atomic, timeout);
+ if (mtip_check_surprise_removal(port->dd->pdev) ||
+ test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &port->dd->dd_flag)) {
+ rv = -ENXIO;
+ goto exec_ic_exit;
+ }
rv = -EAGAIN;
}
& (1 << MTIP_TAG_INTERNAL)) {
dev_warn(&port->dd->pdev->dev,
"Retiring internal command but CI is 1.\n");
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &port->dd->dd_flag)) {
+ hba_reset_nosleep(port->dd);
+ rv = -ENXIO;
+ } else {
+ mtip_restart_port(port);
+ rv = -EAGAIN;
+ }
+ goto exec_ic_exit;
}
} else {
/* Spin for <timeout> checking if command still outstanding */
timeout = jiffies + msecs_to_jiffies(timeout);
-
- while ((readl(
- port->cmd_issue[MTIP_TAG_INTERNAL])
- & (1 << MTIP_TAG_INTERNAL))
- && time_before(jiffies, timeout))
- ;
+ while ((readl(port->cmd_issue[MTIP_TAG_INTERNAL])
+ & (1 << MTIP_TAG_INTERNAL))
+ && time_before(jiffies, timeout)) {
+ if (mtip_check_surprise_removal(port->dd->pdev)) {
+ rv = -ENXIO;
+ goto exec_ic_exit;
+ }
+ if ((fis->command != ATA_CMD_STANDBYNOW1) &&
+ test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &port->dd->dd_flag)) {
+ rv = -ENXIO;
+ goto exec_ic_exit;
+ }
+ }
if (readl(port->cmd_issue[MTIP_TAG_INTERNAL])
& (1 << MTIP_TAG_INTERNAL)) {
dev_err(&port->dd->pdev->dev,
- "Internal command did not complete [%d]\n",
- atomic);
+ "Internal command did not complete [atomic]\n");
rv = -EAGAIN;
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &port->dd->dd_flag)) {
+ hba_reset_nosleep(port->dd);
+ rv = -ENXIO;
+ } else {
+ mtip_restart_port(port);
+ rv = -EAGAIN;
+ }
}
}
-
+exec_ic_exit:
/* Clear the allocated and active bits for the internal command. */
atomic_set(&int_cmd->active, 0);
release_slot(port, MTIP_TAG_INTERNAL);
- clear_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags);
+ if (rv >= 0 && mtip_pause_ncq(port, fis)) {
+ /* NCQ paused */
+ return rv;
+ }
+ clear_bit(MTIP_PF_IC_ACTIVE_BIT, &port->flags);
wake_up_interruptible(&port->svc_wait);
return rv;
int rv = 0;
struct host_to_dev_fis fis;
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &port->dd->dd_flag))
+ return -EFAULT;
+
/* Build the FIS. */
memset(&fis, 0, sizeof(struct host_to_dev_fis));
fis.type = 0x27;
{
int rv;
struct host_to_dev_fis fis;
+ unsigned long start;
/* Build the FIS. */
memset(&fis, 0, sizeof(struct host_to_dev_fis));
fis.opts = 1 << 7;
fis.command = ATA_CMD_STANDBYNOW1;
- /* Execute the command. Use a 15-second timeout for large drives. */
+ start = jiffies;
rv = mtip_exec_internal_command(port,
&fis,
5,
0,
0,
0,
- GFP_KERNEL,
+ GFP_ATOMIC,
+ 15000);
+ dbg_printk(MTIP_DRV_NAME "Time taken to complete standby cmd: %d ms\n",
+ jiffies_to_msecs(jiffies - start));
+ if (rv)
+ dev_warn(&port->dd->pdev->dev,
+ "STANDBY IMMEDIATE command failed.\n");
+
+ return rv;
+}
+
+/*
+ * Issue a READ LOG EXT command to the device.
+ *
+ * @port pointer to the port structure.
+ * @page page number to fetch
+ * @buffer pointer to buffer
+ * @buffer_dma dma address corresponding to @buffer
+ * @sectors page length to fetch, in sectors
+ *
+ * return value
+ * @rv return value from mtip_exec_internal_command()
+ */
+static int mtip_read_log_page(struct mtip_port *port, u8 page, u16 *buffer,
+ dma_addr_t buffer_dma, unsigned int sectors)
+{
+ struct host_to_dev_fis fis;
+
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = ATA_CMD_READ_LOG_EXT;
+ fis.sect_count = sectors & 0xFF;
+ fis.sect_cnt_ex = (sectors >> 8) & 0xFF;
+ fis.lba_low = page;
+ fis.lba_mid = 0;
+ fis.device = ATA_DEVICE_OBS;
+
+ memset(buffer, 0, sectors * ATA_SECT_SIZE);
+
+ return mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ buffer_dma,
+ sectors * ATA_SECT_SIZE,
+ 0,
+ GFP_ATOMIC,
+ MTIP_INTERNAL_COMMAND_TIMEOUT_MS);
+}
+
+/*
+ * Issue a SMART READ DATA command to the device.
+ *
+ * @port pointer to the port structure.
+ * @buffer pointer to buffer
+ * @buffer_dma dma address corresponding to @buffer
+ *
+ * return value
+ * @rv return value from mtip_exec_internal_command()
+ */
+static int mtip_get_smart_data(struct mtip_port *port, u8 *buffer,
+ dma_addr_t buffer_dma)
+{
+ struct host_to_dev_fis fis;
+
+ memset(&fis, 0, sizeof(struct host_to_dev_fis));
+ fis.type = 0x27;
+ fis.opts = 1 << 7;
+ fis.command = ATA_CMD_SMART;
+ fis.features = 0xD0;
+ fis.sect_count = 1;
+ fis.lba_mid = 0x4F;
+ fis.lba_hi = 0xC2;
+ fis.device = ATA_DEVICE_OBS;
+
+ return mtip_exec_internal_command(port,
+ &fis,
+ 5,
+ buffer_dma,
+ ATA_SECT_SIZE,
+ 0,
+ GFP_ATOMIC,
15000);
+}
+
+/*
+ * Get the value of a smart attribute
+ *
+ * @port pointer to the port structure
+ * @id attribute number
+ * @attrib pointer to return attrib information corresponding to @id
+ *
+ * return value
+ * -EINVAL NULL buffer passed or unsupported attribute @id.
+ * -EPERM Identify data not valid, SMART not supported or not enabled
+ */
+static int mtip_get_smart_attr(struct mtip_port *port, unsigned int id,
+ struct smart_attr *attrib)
+{
+ int rv, i;
+ struct smart_attr *pattr;
+
+ if (!attrib)
+ return -EINVAL;
+
+ if (!port->identify_valid) {
+ dev_warn(&port->dd->pdev->dev, "IDENTIFY DATA not valid\n");
+ return -EPERM;
+ }
+ if (!(port->identify[82] & 0x1)) {
+ dev_warn(&port->dd->pdev->dev, "SMART not supported\n");
+ return -EPERM;
+ }
+ if (!(port->identify[85] & 0x1)) {
+ dev_warn(&port->dd->pdev->dev, "SMART not enabled\n");
+ return -EPERM;
+ }
+
+ memset(port->smart_buf, 0, ATA_SECT_SIZE);
+ rv = mtip_get_smart_data(port, port->smart_buf, port->smart_buf_dma);
+ if (rv) {
+ dev_warn(&port->dd->pdev->dev, "Failed to ge SMART data\n");
+ return rv;
+ }
+
+ pattr = (struct smart_attr *)(port->smart_buf + 2);
+ for (i = 0; i < 29; i++, pattr++)
+ if (pattr->attr_id == id) {
+ memcpy(attrib, pattr, sizeof(struct smart_attr));
+ break;
+ }
+
+ if (i == 29) {
+ dev_warn(&port->dd->pdev->dev,
+ "Query for invalid SMART attribute ID\n");
+ rv = -EINVAL;
+ }
return rv;
}
fis.cyl_hi = command[5];
fis.device = command[6] & ~0x10; /* Clear the dev bit*/
-
- dbg_printk(MTIP_DRV_NAME "%s: User Command: cmd %x, feat %x, "
- "nsect %x, sect %x, lcyl %x, "
- "hcyl %x, sel %x\n",
+ dbg_printk(MTIP_DRV_NAME " %s: User Command: cmd %x, feat %x, nsect %x, sect %x, lcyl %x, hcyl %x, sel %x\n",
__func__,
command[0],
command[1],
command[4] = reply->cyl_low;
command[5] = reply->cyl_hi;
- dbg_printk(MTIP_DRV_NAME "%s: Completion Status: stat %x, "
- "err %x , cyl_lo %x cyl_hi %x\n",
+ dbg_printk(MTIP_DRV_NAME " %s: Completion Status: stat %x, err %x , cyl_lo %x cyl_hi %x\n",
__func__,
command[0],
command[1],
}
dbg_printk(MTIP_DRV_NAME
- "%s: User Command: cmd %x, sect %x, "
+ " %s: User Command: cmd %x, sect %x, "
"feat %x, sectcnt %x\n",
__func__,
command[0],
command[2] = command[3];
dbg_printk(MTIP_DRV_NAME
- "%s: Completion Status: stat %x, "
+ " %s: Completion Status: stat %x, "
"err %x, cmd %x\n",
__func__,
command[0],
}
dbg_printk(MTIP_DRV_NAME
- "taskfile: cmd %x, feat %x, nsect %x,"
+ " %s: cmd %x, feat %x, nsect %x,"
" sect/lbal %x, lcyl/lbam %x, hcyl/lbah %x,"
" head/dev %x\n",
+ __func__,
fis.command,
fis.features,
fis.sect_count,
switch (fis.command) {
case ATA_CMD_DOWNLOAD_MICRO:
- /* Change timeout for Download Microcode to 60 seconds.*/
- timeout = 60000;
+ /* Change timeout for Download Microcode to 2 minutes */
+ timeout = 120000;
break;
case ATA_CMD_SEC_ERASE_UNIT:
/* Change timeout for Security Erase Unit to 4 minutes.*/
timeout = 10000;
break;
case ATA_CMD_SMART:
- /* Change timeout for vendor unique command to 10 secs */
- timeout = 10000;
+ /* Change timeout for vendor unique command to 15 secs */
+ timeout = 15000;
break;
default:
timeout = MTIP_IOCTL_COMMAND_TIMEOUT_MS;
req_task->hob_ports[1] = reply->features_ex;
req_task->hob_ports[2] = reply->sect_cnt_ex;
}
-
- /* Com rest after secure erase or lowlevel format */
- if (((fis.command == ATA_CMD_SEC_ERASE_UNIT) ||
- ((fis.command == 0xFC) &&
- (fis.features == 0x27 || fis.features == 0x72 ||
- fis.features == 0x62 || fis.features == 0x26))) &&
- !(reply->command & 1)) {
- mtip_restart_port(dd->port);
- }
-
dbg_printk(MTIP_DRV_NAME
- "%s: Completion: stat %x,"
+ " %s: Completion: stat %x,"
"err %x, sect_cnt %x, lbalo %x,"
"lbamid %x, lbahi %x, dev %x\n",
__func__,
struct host_to_dev_fis *fis;
struct mtip_port *port = dd->port;
struct mtip_cmd *command = &port->commands[tag];
+ int dma_dir = (dir == READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
/* Map the scatter list for DMA access */
- if (dir == READ)
- nents = dma_map_sg(&dd->pdev->dev, command->sg,
- nents, DMA_FROM_DEVICE);
- else
- nents = dma_map_sg(&dd->pdev->dev, command->sg,
- nents, DMA_TO_DEVICE);
+ nents = dma_map_sg(&dd->pdev->dev, command->sg, nents, dma_dir);
command->scatter_ents = nents;
*/
command->comp_data = dd;
command->comp_func = mtip_async_complete;
- command->direction = (dir == READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ command->direction = dma_dir;
/*
* Set the completion function and data for the command passed
* To prevent this command from being issued
* if an internal command is in progress or error handling is active.
*/
- if (unlikely(test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) ||
- test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags))) {
+ if (port->flags & MTIP_PF_PAUSE_IO) {
set_bit(tag, port->cmds_to_issue);
- set_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags);
+ set_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
return;
}
/* Issue the command to the hardware */
mtip_issue_ncq_command(port, tag);
- /* Set the command's timeout value.*/
- port->commands[tag].comp_time = jiffies + msecs_to_jiffies(
- MTIP_NCQ_COMMAND_TIMEOUT_MS);
+ return;
}
/*
down(&dd->port->cmd_slot);
*tag = get_slot(dd->port);
- if (unlikely(*tag < 0))
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) {
+ up(&dd->port->cmd_slot);
return NULL;
+ }
+ if (unlikely(*tag < 0)) {
+ up(&dd->port->cmd_slot);
+ return NULL;
+ }
return dd->port->commands[*tag].sg;
}
* return value
* The size, in bytes, of the data copied into buf.
*/
-static ssize_t hw_show_registers(struct device *dev,
+static ssize_t mtip_hw_show_registers(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int size = 0;
int n;
- size += sprintf(&buf[size], "%s:\ns_active:\n", __func__);
+ size += sprintf(&buf[size], "S ACTive:\n");
for (n = 0; n < dd->slot_groups; n++)
size += sprintf(&buf[size], "0x%08x\n",
group_allocated);
}
- size += sprintf(&buf[size], "completed:\n");
+ size += sprintf(&buf[size], "Completed:\n");
for (n = 0; n < dd->slot_groups; n++)
size += sprintf(&buf[size], "0x%08x\n",
readl(dd->port->completed[n]));
- size += sprintf(&buf[size], "PORT_IRQ_STAT 0x%08x\n",
+ size += sprintf(&buf[size], "PORT IRQ STAT : 0x%08x\n",
readl(dd->port->mmio + PORT_IRQ_STAT));
- size += sprintf(&buf[size], "HOST_IRQ_STAT 0x%08x\n",
+ size += sprintf(&buf[size], "HOST IRQ STAT : 0x%08x\n",
readl(dd->mmio + HOST_IRQ_STAT));
return size;
}
-static DEVICE_ATTR(registers, S_IRUGO, hw_show_registers, NULL);
+
+static ssize_t mtip_hw_show_status(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct driver_data *dd = dev_to_disk(dev)->private_data;
+ int size = 0;
+
+ if (test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "thermal_shutdown\n");
+ else if (test_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag))
+ size += sprintf(buf, "%s", "write_protect\n");
+ else
+ size += sprintf(buf, "%s", "online\n");
+
+ return size;
+}
+
+static DEVICE_ATTR(registers, S_IRUGO, mtip_hw_show_registers, NULL);
+static DEVICE_ATTR(status, S_IRUGO, mtip_hw_show_status, NULL);
/*
* Create the sysfs related attributes.
if (sysfs_create_file(kobj, &dev_attr_registers.attr))
dev_warn(&dd->pdev->dev,
- "Error creating registers sysfs entry\n");
+ "Error creating 'registers' sysfs entry\n");
+ if (sysfs_create_file(kobj, &dev_attr_status.attr))
+ dev_warn(&dd->pdev->dev,
+ "Error creating 'status' sysfs entry\n");
return 0;
}
return -EINVAL;
sysfs_remove_file(kobj, &dev_attr_registers.attr);
+ sysfs_remove_file(kobj, &dev_attr_status.attr);
return 0;
}
"FTL rebuild in progress. Polling for completion.\n");
start = jiffies;
- dd->ftlrebuildflag = 1;
timeout = jiffies + msecs_to_jiffies(MTIP_FTL_REBUILD_TIMEOUT_MS);
do {
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &dd->dd_flag)))
+ return -EFAULT;
if (mtip_check_surprise_removal(dd->pdev))
return -EFAULT;
dev_warn(&dd->pdev->dev,
"FTL rebuild complete (%d secs).\n",
jiffies_to_msecs(jiffies - start) / 1000);
- dd->ftlrebuildflag = 0;
mtip_block_initialize(dd);
- break;
+ return 0;
}
ssleep(10);
} while (time_before(jiffies, timeout));
/* Check for timeout */
- if (dd->ftlrebuildflag) {
- dev_err(&dd->pdev->dev,
+ dev_err(&dd->pdev->dev,
"Timed out waiting for FTL rebuild to complete (%d secs).\n",
jiffies_to_msecs(jiffies - start) / 1000);
- return -EFAULT;
- }
-
- return 0;
+ return -EFAULT;
}
/*
* is in progress nor error handling is active
*/
wait_event_interruptible(port->svc_wait, (port->flags) &&
- !test_bit(MTIP_FLAG_IC_ACTIVE_BIT, &port->flags) &&
- !test_bit(MTIP_FLAG_EH_ACTIVE_BIT, &port->flags));
+ !(port->flags & MTIP_PF_PAUSE_IO));
if (kthread_should_stop())
break;
- set_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags);
- if (test_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags)) {
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &dd->dd_flag)))
+ break;
+
+ set_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
+ if (test_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags)) {
slot = 1;
/* used to restrict the loop to one iteration */
slot_start = num_cmd_slots;
/* Issue the command to the hardware */
mtip_issue_ncq_command(port, slot);
- /* Set the command's timeout value.*/
- port->commands[slot].comp_time = jiffies +
- msecs_to_jiffies(MTIP_NCQ_COMMAND_TIMEOUT_MS);
-
clear_bit(slot, port->cmds_to_issue);
}
- clear_bit(MTIP_FLAG_ISSUE_CMDS_BIT, &port->flags);
- } else if (test_bit(MTIP_FLAG_REBUILD_BIT, &port->flags)) {
- mtip_ftl_rebuild_poll(dd);
- clear_bit(MTIP_FLAG_REBUILD_BIT, &port->flags);
+ clear_bit(MTIP_PF_ISSUE_CMDS_BIT, &port->flags);
+ } else if (test_bit(MTIP_PF_REBUILD_BIT, &port->flags)) {
+ if (!mtip_ftl_rebuild_poll(dd))
+ set_bit(MTIP_DDF_REBUILD_FAILED_BIT,
+ &dd->dd_flag);
+ clear_bit(MTIP_PF_REBUILD_BIT, &port->flags);
}
- clear_bit(MTIP_FLAG_SVC_THD_ACTIVE_BIT, &port->flags);
+ clear_bit(MTIP_PF_SVC_THD_ACTIVE_BIT, &port->flags);
- if (test_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &port->flags))
+ if (test_bit(MTIP_PF_SVC_THD_STOP_BIT, &port->flags))
break;
}
return 0;
int i;
int rv;
unsigned int num_command_slots;
+ unsigned long timeout, timetaken;
+ unsigned char *buf;
+ struct smart_attr attr242;
dd->mmio = pcim_iomap_table(dd->pdev)[MTIP_ABAR];
/* Allocate memory for the command list. */
dd->port->command_list =
dmam_alloc_coherent(&dd->pdev->dev,
- HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
&dd->port->command_list_dma,
GFP_KERNEL);
if (!dd->port->command_list) {
/* Clear the memory we have allocated. */
memset(dd->port->command_list,
0,
- HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2));
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4));
/* Setup the addresse of the RX FIS. */
dd->port->rxfis = dd->port->command_list + HW_CMD_SLOT_SZ;
dd->port->identify_dma = dd->port->command_tbl_dma +
HW_CMD_TBL_AR_SZ;
- /* Setup the address of the sector buffer. */
+ /* Setup the address of the sector buffer - for some non-ncq cmds */
dd->port->sector_buffer = (void *) dd->port->identify + ATA_SECT_SIZE;
dd->port->sector_buffer_dma = dd->port->identify_dma + ATA_SECT_SIZE;
+ /* Setup the address of the log buf - for read log command */
+ dd->port->log_buf = (void *)dd->port->sector_buffer + ATA_SECT_SIZE;
+ dd->port->log_buf_dma = dd->port->sector_buffer_dma + ATA_SECT_SIZE;
+
+ /* Setup the address of the smart buf - for smart read data command */
+ dd->port->smart_buf = (void *)dd->port->log_buf + ATA_SECT_SIZE;
+ dd->port->smart_buf_dma = dd->port->log_buf_dma + ATA_SECT_SIZE;
+
+
/* Point the command headers at the command tables. */
for (i = 0; i < num_command_slots; i++) {
dd->port->commands[i].command_header =
dd->port->mmio + i*0x80 + PORT_SDBV;
}
- /* Reset the HBA. */
- if (mtip_hba_reset(dd) < 0) {
- dev_err(&dd->pdev->dev,
- "Card did not reset within timeout\n");
- rv = -EIO;
+ timetaken = jiffies;
+ timeout = jiffies + msecs_to_jiffies(30000);
+ while (((readl(dd->port->mmio + PORT_SCR_STAT) & 0x0F) != 0x03) &&
+ time_before(jiffies, timeout)) {
+ mdelay(100);
+ }
+ if (unlikely(mtip_check_surprise_removal(dd->pdev))) {
+ timetaken = jiffies - timetaken;
+ dev_warn(&dd->pdev->dev,
+ "Surprise removal detected at %u ms\n",
+ jiffies_to_msecs(timetaken));
+ rv = -ENODEV;
+ goto out2 ;
+ }
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag))) {
+ timetaken = jiffies - timetaken;
+ dev_warn(&dd->pdev->dev,
+ "Removal detected at %u ms\n",
+ jiffies_to_msecs(timetaken));
+ rv = -EFAULT;
goto out2;
}
+ /* Conditionally reset the HBA. */
+ if (!(readl(dd->mmio + HOST_CAP) & HOST_CAP_NZDMA)) {
+ if (mtip_hba_reset(dd) < 0) {
+ dev_err(&dd->pdev->dev,
+ "Card did not reset within timeout\n");
+ rv = -EIO;
+ goto out2;
+ }
+ } else {
+ /* Clear any pending interrupts on the HBA */
+ writel(readl(dd->mmio + HOST_IRQ_STAT),
+ dd->mmio + HOST_IRQ_STAT);
+ }
+
mtip_init_port(dd->port);
mtip_start_port(dd->port);
mod_timer(&dd->port->cmd_timer,
jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
+
+ if (test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)) {
+ rv = -EFAULT;
+ goto out3;
+ }
+
if (mtip_get_identify(dd->port, NULL) < 0) {
rv = -EFAULT;
goto out3;
if (*(dd->port->identify + MTIP_FTL_REBUILD_OFFSET) ==
MTIP_FTL_REBUILD_MAGIC) {
- set_bit(MTIP_FLAG_REBUILD_BIT, &dd->port->flags);
+ set_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags);
return MTIP_FTL_REBUILD_MAGIC;
}
mtip_dump_identify(dd->port);
+
+ /* check write protect, over temp and rebuild statuses */
+ rv = mtip_read_log_page(dd->port, ATA_LOG_SATA_NCQ,
+ dd->port->log_buf,
+ dd->port->log_buf_dma, 1);
+ if (rv) {
+ dev_warn(&dd->pdev->dev,
+ "Error in READ LOG EXT (10h) command\n");
+ /* non-critical error, don't fail the load */
+ } else {
+ buf = (unsigned char *)dd->port->log_buf;
+ if (buf[259] & 0x1) {
+ dev_info(&dd->pdev->dev,
+ "Write protect bit is set.\n");
+ set_bit(MTIP_DDF_WRITE_PROTECT_BIT, &dd->dd_flag);
+ }
+ if (buf[288] == 0xF7) {
+ dev_info(&dd->pdev->dev,
+ "Exceeded Tmax, drive in thermal shutdown.\n");
+ set_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag);
+ }
+ if (buf[288] == 0xBF) {
+ dev_info(&dd->pdev->dev,
+ "Drive indicates rebuild has failed.\n");
+ /* TODO */
+ }
+ }
+
+ /* get write protect progess */
+ memset(&attr242, 0, sizeof(struct smart_attr));
+ if (mtip_get_smart_attr(dd->port, 242, &attr242))
+ dev_warn(&dd->pdev->dev,
+ "Unable to check write protect progress\n");
+ else
+ dev_info(&dd->pdev->dev,
+ "Write protect progress: %d%% (%d blocks)\n",
+ attr242.cur, attr242.data);
return rv;
out3:
/* Free the command/command header memory. */
dmam_free_coherent(&dd->pdev->dev,
- HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
dd->port->command_list,
dd->port->command_list_dma);
out1:
* Send standby immediate (E0h) to the drive so that it
* saves its state.
*/
- if (atomic_read(&dd->drv_cleanup_done) != true) {
+ if (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) {
- mtip_standby_immediate(dd->port);
+ if (!test_bit(MTIP_PF_REBUILD_BIT, &dd->port->flags))
+ if (mtip_standby_immediate(dd->port))
+ dev_warn(&dd->pdev->dev,
+ "STANDBY IMMEDIATE failed\n");
/* de-initialize the port. */
mtip_deinit_port(dd->port);
/* Free the command/command header memory. */
dmam_free_coherent(&dd->pdev->dev,
- HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 2),
+ HW_PORT_PRIV_DMA_SZ + (ATA_SECT_SIZE * 4),
dd->port->command_list,
dd->port->command_list_dma);
/* Free the memory allocated for the for structure. */
if (!dd)
return -ENOTTY;
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
+ return -ENOTTY;
+
switch (cmd) {
case BLKFLSBUF:
return -ENOTTY;
if (!dd)
return -ENOTTY;
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag)))
+ return -ENOTTY;
+
switch (cmd) {
case BLKFLSBUF:
return -ENOTTY;
int nents = 0;
int tag = 0;
+ if (unlikely(dd->dd_flag & MTIP_DDF_STOP_IO)) {
+ if (unlikely(test_bit(MTIP_DDF_REMOVE_PENDING_BIT,
+ &dd->dd_flag))) {
+ bio_endio(bio, -ENXIO);
+ return;
+ }
+ if (unlikely(test_bit(MTIP_DDF_OVER_TEMP_BIT, &dd->dd_flag))) {
+ bio_endio(bio, -ENODATA);
+ return;
+ }
+ if (unlikely(test_bit(MTIP_DDF_WRITE_PROTECT_BIT,
+ &dd->dd_flag) &&
+ bio_data_dir(bio))) {
+ bio_endio(bio, -ENODATA);
+ return;
+ }
+ }
+
if (unlikely(!bio_has_data(bio))) {
blk_queue_flush(queue, 0);
bio_endio(bio, 0);
if (unlikely((bio)->bi_vcnt > MTIP_MAX_SG)) {
dev_warn(&dd->pdev->dev,
- "Maximum number of SGL entries exceeded");
+ "Maximum number of SGL entries exceeded\n");
bio_io_error(bio);
mtip_hw_release_scatterlist(dd, tag);
return;
kobject_put(kobj);
}
- if (dd->mtip_svc_handler)
+ if (dd->mtip_svc_handler) {
+ set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
return rv; /* service thread created for handling rebuild */
+ }
start_service_thread:
sprintf(thd_name, "mtip_svc_thd_%02d", index);
dd, thd_name);
if (IS_ERR(dd->mtip_svc_handler)) {
- printk(KERN_ERR "mtip32xx: service thread failed to start\n");
+ dev_err(&dd->pdev->dev, "service thread failed to start\n");
dd->mtip_svc_handler = NULL;
rv = -EFAULT;
goto kthread_run_error;
}
+ if (wait_for_rebuild == MTIP_FTL_REBUILD_MAGIC)
+ rv = wait_for_rebuild;
+
return rv;
kthread_run_error:
struct kobject *kobj;
if (dd->mtip_svc_handler) {
- set_bit(MTIP_FLAG_SVC_THD_SHOULD_STOP_BIT, &dd->port->flags);
+ set_bit(MTIP_PF_SVC_THD_STOP_BIT, &dd->port->flags);
wake_up_interruptible(&dd->port->svc_wait);
kthread_stop(dd->mtip_svc_handler);
}
- /* Clean up the sysfs attributes managed by the protocol layer. */
- kobj = kobject_get(&disk_to_dev(dd->disk)->kobj);
- if (kobj) {
- mtip_hw_sysfs_exit(dd, kobj);
- kobject_put(kobj);
+ /* Clean up the sysfs attributes, if created */
+ if (test_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag)) {
+ kobj = kobject_get(&disk_to_dev(dd->disk)->kobj);
+ if (kobj) {
+ mtip_hw_sysfs_exit(dd, kobj);
+ kobject_put(kobj);
+ }
}
/*
* from /dev
*/
del_gendisk(dd->disk);
+
+ spin_lock(&rssd_index_lock);
+ ida_remove(&rssd_index_ida, dd->index);
+ spin_unlock(&rssd_index_lock);
+
blk_cleanup_queue(dd->queue);
dd->disk = NULL;
dd->queue = NULL;
/* Delete our gendisk structure, and cleanup the blk queue. */
del_gendisk(dd->disk);
+
+ spin_lock(&rssd_index_lock);
+ ida_remove(&rssd_index_ida, dd->index);
+ spin_unlock(&rssd_index_lock);
+
blk_cleanup_queue(dd->queue);
dd->disk = NULL;
dd->queue = NULL;
return -ENOMEM;
}
- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
-
- atomic_set(&dd->resumeflag, false);
-
/* Attach the private data to this PCI device. */
pci_set_drvdata(pdev, dd);
* instance number.
*/
instance++;
-
+ if (rv != MTIP_FTL_REBUILD_MAGIC)
+ set_bit(MTIP_DDF_INIT_DONE_BIT, &dd->dd_flag);
goto done;
block_initialize_err:
pci_set_drvdata(pdev, NULL);
return rv;
done:
- /* Set the atomic variable as 0 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
-
return rv;
}
struct driver_data *dd = pci_get_drvdata(pdev);
int counter = 0;
+ set_bit(MTIP_DDF_REMOVE_PENDING_BIT, &dd->dd_flag);
+
if (mtip_check_surprise_removal(pdev)) {
- while (atomic_read(&dd->drv_cleanup_done) == false) {
+ while (!test_bit(MTIP_DDF_CLEANUP_BIT, &dd->dd_flag)) {
counter++;
msleep(20);
if (counter == 10) {
}
}
}
- /* Set the atomic variable as 1 in case of SRSI */
- atomic_set(&dd->drv_cleanup_done, true);
/* Clean up the block layer. */
mtip_block_remove(dd);
return -EFAULT;
}
- atomic_set(&dd->resumeflag, true);
+ set_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
/* Disable ports & interrupts then send standby immediate */
rv = mtip_block_suspend(dd);
dev_err(&pdev->dev, "Unable to resume\n");
err:
- atomic_set(&dd->resumeflag, false);
+ clear_bit(MTIP_DDF_RESUME_BIT, &dd->dd_flag);
return rv;
}
*/
static int __init mtip_init(void)
{
+ int error;
+
printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n");
/* Allocate a major block device number to use with this driver. */
- mtip_major = register_blkdev(0, MTIP_DRV_NAME);
- if (mtip_major < 0) {
+ error = register_blkdev(0, MTIP_DRV_NAME);
+ if (error <= 0) {
printk(KERN_ERR "Unable to register block device (%d)\n",
- mtip_major);
+ error);
return -EBUSY;
}
+ mtip_major = error;
/* Register our PCI operations. */
- return pci_register_driver(&mtip_pci_driver);
+ error = pci_register_driver(&mtip_pci_driver);
+ if (error)
+ unregister_blkdev(mtip_major, MTIP_DRV_NAME);
+
+ return error;
}
/*
projects / linux-flexiantxendom0-3.2.10.git / blobdiff