#include "oid.h"
-//
-// Debug information verbosity: lower values indicate higher urgency
-//
+/* */
+/* Debug information verbosity: lower values indicate higher urgency */
+/* */
#define RT_DEBUG_OFF 0
#define RT_DEBUG_ERROR 1
#define RT_DEBUG_WARN 2
#define RT_DEBUG_INFO 4
#define RT_DEBUG_LOUD 5
-#define NIC_TAG ((ULONG)'0682')
-#define NIC_DBG_STRING ("**RT28xx**")
+#define NIC_TAG ((unsigned long)'0682')
+#define NIC_DBG_char ("**RT28xx**")
-#define RALINK_2883_VERSION ((UINT32)0x28830300)
-#define RALINK_2880E_VERSION ((UINT32)0x28720200)
-#define RALINK_3070_VERSION ((UINT32)0x30700200)
+#ifdef RTMP_MAC_USB
+#define TX_RING_SIZE 8 /* 1 */
+#define PRIO_RING_SIZE 8
+#define MGMT_RING_SIZE 32 /* PRIO_RING_SIZE */
+#define RX_RING_SIZE 8
+#define MAX_TX_PROCESS 4
+#define LOCAL_TXBUF_SIZE 2048
+#endif /* RTMP_MAC_USB // */
-//
-// NDIS version in use by the NIC driver.
-// The high byte is the major version. The low byte is the minor version.
-//
-#ifdef NDIS51_MINIPORT
-#define NIC_DRIVER_VERSION 0x0501
-#else
-#define NIC_DRIVER_VERSION 0x0500
-#endif
+/*#define PACKED */
-//
-// NDIS media type, current is ethernet, change if native wireless supported
-//
-#define NIC_MEDIA_TYPE NdisMedium802_3
-#define NIC_PCI_HDR_LENGTH 0xe2
-#define NIC_MAX_PACKET_SIZE 2304
-#define NIC_HEADER_SIZE 14
-#define MAX_MAP_REGISTERS_NEEDED 32
-#define MIN_MAP_REGISTERS_NEEDED 2 //Todo: should consider fragment issue.
-
-//
-// interface type, we use PCI
-//
-#define NIC_INTERFACE_TYPE NdisInterfacePci
-#define NIC_INTERRUPT_MODE NdisInterruptLevelSensitive
-
-//
-// buffer size passed in NdisMQueryAdapterResources
-// We should only need three adapter resources (IO, interrupt and memory),
-// Some devices get extra resources, so have room for 10 resources
-// UF_SIZE (sizeof(NDIS_RESOURCE_LIST) + (10*sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR)))
-
-
-#define NIC_RESOURCE_B//
-// IO space length
-//
-#define NIC_MAP_IOSPACE_LENGTH sizeof(CSR_STRUC)
+#define RALINK_2883_VERSION ((u32)0x28830300)
+#define RALINK_2880E_VERSION ((u32)0x28720200)
+#define RALINK_3070_VERSION ((u32)0x30700200)
#define MAX_RX_PKT_LEN 1520
-//
-// Entry number for each DMA descriptor ring
-//
+/* */
+/* Entry number for each DMA descriptor ring */
+/* */
-#ifdef RT2860
-#define TX_RING_SIZE 64 //64
+#ifdef RTMP_MAC_PCI
+#define TX_RING_SIZE 64 /*64 */
#define MGMT_RING_SIZE 128
-#define RX_RING_SIZE 128 //64
-#define MAX_TX_PROCESS TX_RING_SIZE //8
+#define RX_RING_SIZE 128 /*64 */
+#define MAX_TX_PROCESS TX_RING_SIZE /*8 */
#define MAX_DMA_DONE_PROCESS TX_RING_SIZE
-#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8
+#define MAX_TX_DONE_PROCESS TX_RING_SIZE /*8 */
#define LOCAL_TXBUF_SIZE 2
-#endif
-#ifdef RT2870
-#define TX_RING_SIZE 8 // 1
-#define PRIO_RING_SIZE 8
-#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
-#define RX_RING_SIZE 8
-#define MAX_TX_PROCESS 4
-#define LOCAL_TXBUF_SIZE 2048
-#endif // RT2870 //
+#endif /* RTMP_MAC_PCI // */
-#define MAX_RX_PROCESS 128 //64 //32
+#define MAX_RX_PROCESS 128 /*64 //32 */
#define NUM_OF_LOCAL_TXBUF 2
#define TXD_SIZE 16
#define TXWI_SIZE 16
#define RXD_SIZE 16
#define RXWI_SIZE 16
-// TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header
-#define TX_DMA_1ST_BUFFER_SIZE 96 // only the 1st physical buffer is pre-allocated
-#define MGMT_DMA_BUFFER_SIZE 1536 //2048
-#define RX_BUFFER_AGGRESIZE 3840 //3904 //3968 //4096 //2048 //4096
-#define RX_BUFFER_NORMSIZE 3840 //3904 //3968 //4096 //2048 //4096
+/* TXINFO_SIZE + TXWI_SIZE + 802.11 Header Size + AMSDU sub frame header */
+#define TX_DMA_1ST_BUFFER_SIZE 96 /* only the 1st physical buffer is pre-allocated */
+#define MGMT_DMA_BUFFER_SIZE 1536 /*2048 */
+#define RX_BUFFER_AGGRESIZE 3840 /*3904 //3968 //4096 //2048 //4096 */
+#define RX_BUFFER_NORMSIZE 3840 /*3904 //3968 //4096 //2048 //4096 */
#define TX_BUFFER_NORMSIZE RX_BUFFER_NORMSIZE
-#define MAX_FRAME_SIZE 2346 // Maximum 802.11 frame size
-#define MAX_AGGREGATION_SIZE 3840 //3904 //3968 //4096
+#define MAX_FRAME_SIZE 2346 /* Maximum 802.11 frame size */
+#define MAX_AGGREGATION_SIZE 3840 /*3904 //3968 //4096 */
#define MAX_NUM_OF_TUPLE_CACHE 2
#define MAX_MCAST_LIST_SIZE 32
#define MAX_LEN_OF_VENDOR_DESC 64
-//#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ
+/*#define MAX_SIZE_OF_MCAST_PSQ (NUM_OF_LOCAL_TXBUF >> 2) // AP won't spend more than 1/4 of total buffers on M/BCAST PSQ */
#define MAX_SIZE_OF_MCAST_PSQ 32
#define MAX_RX_PROCESS_CNT (RX_RING_SIZE)
+/*
+ WMM Note: If memory of your system is not much, please reduce the definition;
+ or when you do WMM test, the queue for low priority AC will be full, i.e.
+ TX_RING_SIZE + MAX_PACKETS_IN_QUEUE packets for the AC will be buffered in
+ WLAN, maybe no any packet buffer can be got in Ethernet driver.
+
+ Sometimes no packet buffer can be got in Ethernet driver, the system will
+ send flow control packet to the sender to slow down its sending rate.
+ So no WMM can be saw in the air.
+*/
+
+/*
+ Need to use 64 in vxworks for test case WMM A5-T07
+ Two dnlink (10Mbps) from a WMM station to a non-WMM station.
+ If use 256, queue is not enough.
+ And in rt_main_end.c, clConfig.clNum = RX_RING_SIZE * 3; is changed to
+ clConfig.clNum = RX_RING_SIZE * 4;
+*/
+/* TODO: For VxWorks the size is 256. Shall we cahnge the value as 256 for all OS????? */
+#define MAX_PACKETS_IN_QUEUE (512) /*(512) // to pass WMM A5-WPAPSK */
-#define MAX_PACKETS_IN_QUEUE (512) //(512) // to pass WMM A5-WPAPSK
#define MAX_PACKETS_IN_MCAST_PS_QUEUE 32
-#define MAX_PACKETS_IN_PS_QUEUE 128 //32
-#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
+#define MAX_PACKETS_IN_PS_QUEUE 128 /*32 */
+#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
+#ifdef RTMP_EFUSE_SUPPORT
+/*2008/09/11:KH add to support efuse<-- */
#define MAX_EEPROM_BIN_FILE_SIZE 1024
+#define EFUSE_BUFFER_PATH "/tmp/RT30xxEEPROM.bin"
+/*2008/09/11:KH add to support efuse--> */
+#endif /* RTMP_EFUSE_SUPPORT // */
-// RxFilter
+/* RxFilter */
#define STANORMAL 0x17f97
#define APNORMAL 0x15f97
-//
-// RTMP_ADAPTER flags
-//
+#define PSPXLINK 0x17f93
+/* */
+/* struct rt_rtmp_adapter flags */
+/* */
#define fRTMP_ADAPTER_MAP_REGISTER 0x00000001
#define fRTMP_ADAPTER_INTERRUPT_IN_USE 0x00000002
#define fRTMP_ADAPTER_HARDWARE_ERROR 0x00000004
#define fRTMP_ADAPTER_SCAN_2040 0x04000000
#define fRTMP_ADAPTER_RADIO_MEASUREMENT 0x08000000
-#define fRTMP_ADAPTER_START_UP 0x10000000 //Devive already initialized and enabled Tx/Rx.
+#define fRTMP_ADAPTER_START_UP 0x10000000 /*Devive already initialized and enabled Tx/Rx. */
#define fRTMP_ADAPTER_MEDIA_STATE_CHANGE 0x20000000
#define fRTMP_ADAPTER_IDLE_RADIO_OFF 0x40000000
-//
-// STA operation status flags
-//
+/* */
+/* STA operation status flags */
+/* */
#define fOP_STATUS_INFRA_ON 0x00000001
#define fOP_STATUS_ADHOC_ON 0x00000002
#define fOP_STATUS_BG_PROTECTION_INUSED 0x00000004
#define fOP_STATUS_MEDIA_STATE_CONNECTED 0x00000080
#define fOP_STATUS_WMM_INUSED 0x00000100
#define fOP_STATUS_AGGREGATION_INUSED 0x00000200
-#define fOP_STATUS_DOZE 0x00000400 // debug purpose
-#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 // piggy-back, and aggregation
+#define fOP_STATUS_DOZE 0x00000400 /* debug purpose */
+#define fOP_STATUS_PIGGYBACK_INUSED 0x00000800 /* piggy-back, and aggregation */
#define fOP_STATUS_APSD_INUSED 0x00001000
#define fOP_STATUS_TX_AMSDU_INUSED 0x00002000
#define fOP_STATUS_MAX_RETRY_ENABLED 0x00004000
#define fOP_STATUS_WAKEUP_NOW 0x00008000
-#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
+#define fOP_STATUS_PCIE_DEVICE 0x00020000
+#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE fOP_STATUS_PCIE_DEVICE
-#ifdef RT2860
-//
-// RTMP_ADAPTER PSFlags : related to advanced power save.
-//
-// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up
+/* */
+/* struct rt_rtmp_adapter PSFlags : related to advanced power save. */
+/* */
+/* Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up */
#define fRTMP_PS_CAN_GO_SLEEP 0x00000001
-// Indicate whether driver has issue a LinkControl command to PCIe L1
+/* Indicate whether driver has issue a LinkControl command to PCIe L1 */
#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002
-// Indicate driver should disable kick off hardware to send packets from now.
+/* Indicate driver should disable kick off hardware to send packets from now. */
#define fRTMP_PS_DISABLE_TX 0x00000004
-// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me
-//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
+/* Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me */
+/*. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. */
#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008
-#endif
+#define fRTMP_PS_TOGGLE_L1 0x00000010 /* Use Toggle L1 mechanism for rt28xx PCIe */
+
+#ifdef RT3090
+#define WAKE_MCU_CMD 0x31
+#define SLEEP_MCU_CMD 0x30
+#define RFOFF_MCU_CMD 0x35
+#endif /* RT3090 // */
#define CCKSETPROTECT 0x1
#define OFDMSETPROTECT 0x2
#define GR40SETPROTECT 0x20
#define ALLN_SETPROTECT (GR40SETPROTECT | GF20SETPROTECT | MM40SETPROTECT | MM20SETPROTECT)
-//
-// AP's client table operation status flags
-//
-#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 // CLIENT can parse QOS DATA frame
-#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 // CLIENT can receive Ralink's proprietary TX aggregation frame
-#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 // CLIENT support piggy-back
+/* */
+/* AP's client table operation status flags */
+/* */
+#define fCLIENT_STATUS_WMM_CAPABLE 0x00000001 /* CLIENT can parse QOS DATA frame */
+#define fCLIENT_STATUS_AGGREGATION_CAPABLE 0x00000002 /* CLIENT can receive Ralink's proprietary TX aggregation frame */
+#define fCLIENT_STATUS_PIGGYBACK_CAPABLE 0x00000004 /* CLIENT support piggy-back */
#define fCLIENT_STATUS_AMSDU_INUSED 0x00000008
#define fCLIENT_STATUS_SGI20_CAPABLE 0x00000010
#define fCLIENT_STATUS_SGI40_CAPABLE 0x00000020
#define fCLIENT_STATUS_HTC_CAPABLE 0x00000100
#define fCLIENT_STATUS_RDG_CAPABLE 0x00000200
#define fCLIENT_STATUS_MCSFEEDBACK_CAPABLE 0x00000400
-#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
+#define fCLIENT_STATUS_APSD_CAPABLE 0x00000800 /* UAPSD STATION */
#define fCLIENT_STATUS_RALINK_CHIPSET 0x00100000
-//
-// STA configuration flags
-//
+/* */
+/* STA configuration flags */
+/* */
-// 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case
+/* 802.11n Operating Mode Definition. 0-3 also used in ASICUPdateProtect switch case */
#define HT_NO_PROTECT 0
#define HT_LEGACY_PROTECT 1
#define HT_40_PROTECT 2
#define HT_2040_PROTECT 3
#define HT_RTSCTS_6M 7
-//following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE.
-#define HT_ATHEROS 8 // rt2860c has problem with atheros chip. we need to turn on RTS/CTS .
-#define HT_FORCERTSCTS 9 // Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary.
+/*following is our own definition in order to turn on our ASIC protection register in INFRASTRUCTURE. */
+#define HT_ATHEROS 8 /* rt2860c has problem with atheros chip. we need to turn on RTS/CTS . */
+#define HT_FORCERTSCTS 9 /* Force turn on RTS/CTS first. then go to evaluate if this force RTS is necessary. */
-//
-// RX Packet Filter control flags. Apply on pAd->PacketFilter
-//
+/* */
+/* RX Packet Filter control flags. Apply on pAd->PacketFilter */
+/* */
#define fRX_FILTER_ACCEPT_DIRECT NDIS_PACKET_TYPE_DIRECTED
#define fRX_FILTER_ACCEPT_MULTICAST NDIS_PACKET_TYPE_MULTICAST
#define fRX_FILTER_ACCEPT_BROADCAST NDIS_PACKET_TYPE_BROADCAST
#define fRX_FILTER_ACCEPT_ALL_MULTICAST NDIS_PACKET_TYPE_ALL_MULTICAST
+#define fRX_FILTER_ACCEPT_PROMISCUOUS NDIS_PACKET_TYPE_PROMISCUOUS
-//
-// Error code section
-//
-// NDIS_ERROR_CODE_ADAPTER_NOT_FOUND
+/* */
+/* Error code section */
+/* */
+/* NDIS_ERROR_CODE_ADAPTER_NOT_FOUND */
#define ERRLOG_READ_PCI_SLOT_FAILED 0x00000101L
#define ERRLOG_WRITE_PCI_SLOT_FAILED 0x00000102L
#define ERRLOG_VENDOR_DEVICE_NOMATCH 0x00000103L
-// NDIS_ERROR_CODE_ADAPTER_DISABLED
+/* NDIS_ERROR_CODE_ADAPTER_DISABLED */
#define ERRLOG_BUS_MASTER_DISABLED 0x00000201L
-// NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION
+/* NDIS_ERROR_CODE_UNSUPPORTED_CONFIGURATION */
#define ERRLOG_INVALID_SPEED_DUPLEX 0x00000301L
#define ERRLOG_SET_SECONDARY_FAILED 0x00000302L
-// NDIS_ERROR_CODE_OUT_OF_RESOURCES
+/* NDIS_ERROR_CODE_OUT_OF_RESOURCES */
#define ERRLOG_OUT_OF_MEMORY 0x00000401L
#define ERRLOG_OUT_OF_SHARED_MEMORY 0x00000402L
#define ERRLOG_OUT_OF_MAP_REGISTERS 0x00000403L
#define ERRLOG_OUT_OF_NDIS_PACKET 0x00000407L
#define ERRLOG_OUT_OF_LOOKASIDE_MEMORY 0x00000408L
-// NDIS_ERROR_CODE_HARDWARE_FAILURE
+/* NDIS_ERROR_CODE_HARDWARE_FAILURE */
#define ERRLOG_SELFTEST_FAILED 0x00000501L
#define ERRLOG_INITIALIZE_ADAPTER 0x00000502L
#define ERRLOG_REMOVE_MINIPORT 0x00000503L
-// NDIS_ERROR_CODE_RESOURCE_CONFLICT
+/* NDIS_ERROR_CODE_RESOURCE_CONFLICT */
#define ERRLOG_MAP_IO_SPACE 0x00000601L
#define ERRLOG_QUERY_ADAPTER_RESOURCES 0x00000602L
#define ERRLOG_NO_IO_RESOURCE 0x00000603L
#define ERRLOG_NO_INTERRUPT_RESOURCE 0x00000604L
#define ERRLOG_NO_MEMORY_RESOURCE 0x00000605L
-
-// WDS definition
+/* WDS definition */
#define MAX_WDS_ENTRY 4
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
+#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
#define WDS_DISABLE_MODE 0
#define WDS_RESTRICT_MODE 1
#define WDS_REPEATER_MODE 3
#define WDS_LAZY_MODE 4
-
#define MAX_MESH_NUM 0
#define MAX_APCLI_NUM 0
#define MAX_MBSSID_NUM 1
-#if defined(RT2860) || defined(RT30xx)
#ifdef MBSS_SUPPORT
#undef MAX_MBSSID_NUM
#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
-#endif // MBSS_SUPPORT //
-#endif
+#endif /* MBSS_SUPPORT // */
/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
{ if (apidx > MAX_MBSSID_NUM) { \
- printk("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx); \
+ DBGPRINT(RT_DEBUG_ERROR, ("%s> Error! apidx = %d > MAX_MBSSID_NUM!\n", __func__, apidx)); \
apidx = MAIN_MBSSID; } }
#define VALID_WCID(_wcid) ((_wcid) > 0 && (_wcid) < MAX_LEN_OF_MAC_TABLE )
#define MAIN_MBSSID 0
#define FIRST_MBSSID 1
-
#define MAX_BEACON_SIZE 512
-// If the MAX_MBSSID_NUM is larger than 6,
-// it shall reserve some WCID space(wcid 222~253) for beacon frames.
-// - these wcid 238~253 are reserved for beacon#6(ra6).
-// - these wcid 222~237 are reserved for beacon#7(ra7).
+/* If the MAX_MBSSID_NUM is larger than 6, */
+/* it shall reserve some WCID space(wcid 222~253) for beacon frames. */
+/* - these wcid 238~253 are reserved for beacon#6(ra6). */
+/* - these wcid 222~237 are reserved for beacon#7(ra7). */
#if defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 8)
#define HW_RESERVED_WCID 222
#elif defined(MAX_MBSSID_NUM) && (MAX_MBSSID_NUM == 7)
#define HW_RESERVED_WCID 255
#endif
-// Then dedicate wcid of DFS and Carrier-Sense.
+/* Then dedicate wcid of DFS and Carrier-Sense. */
#define DFS_CTS_WCID (HW_RESERVED_WCID - 1)
#define CS_CTS_WCID (HW_RESERVED_WCID - 2)
#define LAST_SPECIFIC_WCID (HW_RESERVED_WCID - 2)
-// If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211.
-// If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228.
+/* If MAX_MBSSID_NUM is 8, the maximum available wcid for the associated STA is 211. */
+/* If MAX_MBSSID_NUM is 7, the maximum available wcid for the associated STA is 228. */
#define MAX_AVAILABLE_CLIENT_WCID (LAST_SPECIFIC_WCID - MAX_MBSSID_NUM - 1)
-// TX need WCID to find Cipher Key
-// these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8.
+/* TX need WCID to find Cipher Key */
+/* these wcid 212 ~ 219 are reserved for bc/mc packets if MAX_MBSSID_NUM is 8. */
#define GET_GroupKey_WCID(__wcid, __bssidx) \
{ \
__wcid = LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM) + __bssidx; \
#define IsGroupKeyWCID(__wcid) (((__wcid) < LAST_SPECIFIC_WCID) && ((__wcid) >= (LAST_SPECIFIC_WCID - (MAX_MBSSID_NUM))))
-
-// definition to support multiple BSSID
+/* definition to support multiple BSSID */
#define BSS0 0
#define BSS1 1
#define BSS2 2
#define BSS6 6
#define BSS7 7
-
-//============================================================
-// Length definitions
+/*============================================================ */
+/* Length definitions */
#define PEER_KEY_NO 2
#define MAC_ADDR_LEN 6
#define TIMESTAMP_LEN 8
-#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES // 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
-#define MAX_LEN_OF_KEY 32 // 32 octets == 256 bits, Redefine for WPA
-#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
-#define MAX_NUM_OF_11JCHANNELS 20 // 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination
+#define MAX_LEN_OF_SUPPORTED_RATES MAX_LENGTH_OF_SUPPORT_RATES /* 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 */
+#define MAX_LEN_OF_KEY 32 /* 32 octets == 256 bits, Redefine for WPA */
+#define MAX_NUM_OF_CHANNELS MAX_NUM_OF_CHS /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
+#define MAX_NUM_OF_11JCHANNELS 20 /* 14 channels @2.4G + 12@UNII + 4 @MMAC + 11 @HiperLAN2 + 7 @Japan + 1 as NULL termination */
#define MAX_LEN_OF_SSID 32
#define CIPHER_TEXT_LEN 128
#define HASH_TABLE_SIZE 256
-#define MAX_VIE_LEN 1024 // New for WPA cipher suite variable IE sizes.
+#define MAX_VIE_LEN 1024 /* New for WPA cipher suite variable IE sizes. */
#define MAX_SUPPORT_MCS 32
+#define MAX_NUM_OF_BBP_LATCH 140
-//============================================================
-// ASIC WCID Table definition.
-//============================================================
-#define BSSID_WCID 1 // in infra mode, always put bssid with this WCID
+/*============================================================ */
+/* ASIC WCID Table definition. */
+/*============================================================ */
+#define BSSID_WCID 1 /* in infra mode, always put bssid with this WCID */
#define MCAST_WCID 0x0
#define BSS0Mcast_WCID 0x0
#define BSS1Mcast_WCID 0xf8
#define MAX_NUM_OF_ACL_LIST MAX_NUMBER_OF_ACL
-#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC // if MAX_MBSSID_NUM is 8, this value can't be larger than 211
+#define MAX_LEN_OF_MAC_TABLE MAX_NUMBER_OF_MAC /* if MAX_MBSSID_NUM is 8, this value can't be larger than 211 */
#if MAX_LEN_OF_MAC_TABLE>MAX_AVAILABLE_CLIENT_WCID
-#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!!!!
+#error MAX_LEN_OF_MAC_TABLE can not be larger than MAX_AVAILABLE_CLIENT_WCID!
#endif
#define MAX_NUM_OF_WDS_LINK_PERBSSID 3
#define NUM_OF_TID 8
#define MAX_AID_BA 4
-#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient
-#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2)// (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator
+#define MAX_LEN_OF_BA_REC_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) //Block ACK recipient */
+#define MAX_LEN_OF_BA_ORI_TABLE ((NUM_OF_TID * MAX_LEN_OF_MAC_TABLE)/2) /* (NUM_OF_TID*MAX_AID_BA + 32) // Block ACK originator */
#define MAX_LEN_OF_BSS_TABLE 64
#define MAX_REORDERING_MPDU_NUM 512
-// key related definitions
+/* key related definitions */
#define SHARE_KEY_NUM 4
-#define MAX_LEN_OF_SHARE_KEY 16 // byte count
-#define MAX_LEN_OF_PEER_KEY 16 // byte count
-#define PAIRWISE_KEY_NUM 64 // in MAC ASIC pairwise key table
+#define MAX_LEN_OF_SHARE_KEY 16 /* byte count */
+#define MAX_LEN_OF_PEER_KEY 16 /* byte count */
+#define PAIRWISE_KEY_NUM 64 /* in MAC ASIC pairwise key table */
#define GROUP_KEY_NUM 4
#define PMK_LEN 32
-#define WDS_PAIRWISE_KEY_OFFSET 60 // WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table
-#define PMKID_NO 4 // Number of PMKID saved supported
+#define WDS_PAIRWISE_KEY_OFFSET 60 /* WDS links uses pairwise key#60 ~ 63 in ASIC pairwise key table */
+#define PMKID_NO 4 /* Number of PMKID saved supported */
#define MAX_LEN_OF_MLME_BUFFER 2048
-// power status related definitions
+/* power status related definitions */
#define PWR_ACTIVE 0
#define PWR_SAVE 1
-#define PWR_MMPS 2 //MIMO power save
+#define PWR_MMPS 2 /*MIMO power save */
-// Auth and Assoc mode related definitions
+/* Auth and Assoc mode related definitions */
#define AUTH_MODE_OPEN 0x00
#define AUTH_MODE_KEY 0x01
-// BSS Type definitions
-#define BSS_ADHOC 0 // = Ndis802_11IBSS
-#define BSS_INFRA 1 // = Ndis802_11Infrastructure
-#define BSS_ANY 2 // = Ndis802_11AutoUnknown
-#define BSS_MONITOR 3 // = Ndis802_11Monitor
-
+/* BSS Type definitions */
+#define BSS_ADHOC 0 /* = Ndis802_11IBSS */
+#define BSS_INFRA 1 /* = Ndis802_11Infrastructure */
+#define BSS_ANY 2 /* = Ndis802_11AutoUnknown */
+#define BSS_MONITOR 3 /* = Ndis802_11Monitor */
-// Reason code definitions
+/* Reason code definitions */
#define REASON_RESERVED 0
#define REASON_UNSPECIFY 1
-#define REASON_NO_LONGER_VALID 2
+#define REASON_NO_longER_VALID 2
#define REASON_DEAUTH_STA_LEAVING 3
#define REASON_DISASSOC_INACTIVE 4
#define REASON_DISASSPC_AP_UNABLE 5
#define REASON_QOS_REQUEST_TIMEOUT 39
#define REASON_QOS_CIPHER_NOT_SUPPORT 45
-// Status code definitions
+/* Status code definitions */
#define MLME_SUCCESS 0
#define MLME_UNSPECIFY_FAIL 1
#define MLME_CANNOT_SUPPORT_CAP 10
#define MLME_QOS_UNSPECIFY 32
#define MLME_REQUEST_DECLINED 37
#define MLME_REQUEST_WITH_INVALID_PARAM 38
+#define MLME_INVALID_GROUP_CIPHER 41
+#define MLME_INVALID_PAIRWISE_CIPHER 42
+#define MLME_INVALID_AKMP 43
#define MLME_DLS_NOT_ALLOW_IN_QBSS 48
#define MLME_DEST_STA_NOT_IN_QBSS 49
#define MLME_DEST_STA_IS_NOT_A_QSTA 50
#define MLME_STATE_MACHINE_REJECT 0x53
#define MLME_MAC_TABLE_FAIL 0x54
-// IE code
+/* IE code */
#define IE_SSID 0
#define IE_SUPP_RATES 1
#define IE_FH_PARM 2
#define IE_CF_PARM 4
#define IE_TIM 5
#define IE_IBSS_PARM 6
-#define IE_COUNTRY 7 // 802.11d
-#define IE_802_11D_REQUEST 10 // 802.11d
-#define IE_QBSS_LOAD 11 // 802.11e d9
-#define IE_EDCA_PARAMETER 12 // 802.11e d9
-#define IE_TSPEC 13 // 802.11e d9
-#define IE_TCLAS 14 // 802.11e d9
-#define IE_SCHEDULE 15 // 802.11e d9
+#define IE_COUNTRY 7 /* 802.11d */
+#define IE_802_11D_REQUEST 10 /* 802.11d */
+#define IE_QBSS_LOAD 11 /* 802.11e d9 */
+#define IE_EDCA_PARAMETER 12 /* 802.11e d9 */
+#define IE_TSPEC 13 /* 802.11e d9 */
+#define IE_TCLAS 14 /* 802.11e d9 */
+#define IE_SCHEDULE 15 /* 802.11e d9 */
#define IE_CHALLENGE_TEXT 16
-#define IE_POWER_CONSTRAINT 32 // 802.11h d3.3
-#define IE_POWER_CAPABILITY 33 // 802.11h d3.3
-#define IE_TPC_REQUEST 34 // 802.11h d3.3
-#define IE_TPC_REPORT 35 // 802.11h d3.3
-#define IE_SUPP_CHANNELS 36 // 802.11h d3.3
-#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 // 802.11h d3.3
-#define IE_MEASUREMENT_REQUEST 38 // 802.11h d3.3
-#define IE_MEASUREMENT_REPORT 39 // 802.11h d3.3
-#define IE_QUIET 40 // 802.11h d3.3
-#define IE_IBSS_DFS 41 // 802.11h d3.3
-#define IE_ERP 42 // 802.11g
-#define IE_TS_DELAY 43 // 802.11e d9
-#define IE_TCLAS_PROCESSING 44 // 802.11e d9
-#define IE_QOS_CAPABILITY 46 // 802.11e d6
-#define IE_HT_CAP 45 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_AP_CHANNEL_REPORT 51 // 802.11k d6
-#define IE_HT_CAP2 52 // 802.11n d1. HT CAPABILITY. ELEMENT ID TBD
-#define IE_RSN 48 // 802.11i d3.0
-#define IE_WPA2 48 // WPA2
-#define IE_EXT_SUPP_RATES 50 // 802.11g
-#define IE_SUPP_REG_CLASS 59 // 802.11y. Supported regulatory classes.
-#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 // 802.11n
-#define IE_ADD_HT 61 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-#define IE_ADD_HT2 53 // 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD
-
-
-// For 802.11n D3.03
-//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
-#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
-#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
-#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
-#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
-#define IE_EXT_CAPABILITY 127 // 802.11n D3.03
-
-
-#define IE_WPA 221 // WPA
-#define IE_VENDOR_SPECIFIC 221 // Wifi WMM (WME)
-
-#define OUI_BROADCOM_HT 51 //
-#define OUI_BROADCOM_HTADD 52 //
-#define OUI_PREN_HT_CAP 51 //
-#define OUI_PREN_ADD_HT 52 //
-
-// CCX information
-#define IE_AIRONET_CKIP 133 // CCX1.0 ID 85H for CKIP
-#define IE_AP_TX_POWER 150 // CCX 2.0 for AP transmit power
-#define IE_MEASUREMENT_CAPABILITY 221 // CCX 2.0
+#define IE_POWER_CONSTRAint 32 /* 802.11h d3.3 */
+#define IE_POWER_CAPABILITY 33 /* 802.11h d3.3 */
+#define IE_TPC_REQUEST 34 /* 802.11h d3.3 */
+#define IE_TPC_REPORT 35 /* 802.11h d3.3 */
+#define IE_SUPP_CHANNELS 36 /* 802.11h d3.3 */
+#define IE_CHANNEL_SWITCH_ANNOUNCEMENT 37 /* 802.11h d3.3 */
+#define IE_MEASUREMENT_REQUEST 38 /* 802.11h d3.3 */
+#define IE_MEASUREMENT_REPORT 39 /* 802.11h d3.3 */
+#define IE_QUIET 40 /* 802.11h d3.3 */
+#define IE_IBSS_DFS 41 /* 802.11h d3.3 */
+#define IE_ERP 42 /* 802.11g */
+#define IE_TS_DELAY 43 /* 802.11e d9 */
+#define IE_TCLAS_PROCESSING 44 /* 802.11e d9 */
+#define IE_QOS_CAPABILITY 46 /* 802.11e d6 */
+#define IE_HT_CAP 45 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_AP_CHANNEL_REPORT 51 /* 802.11k d6 */
+#define IE_HT_CAP2 52 /* 802.11n d1. HT CAPABILITY. ELEMENT ID TBD */
+#define IE_RSN 48 /* 802.11i d3.0 */
+#define IE_WPA2 48 /* WPA2 */
+#define IE_EXT_SUPP_RATES 50 /* 802.11g */
+#define IE_SUPP_REG_CLASS 59 /* 802.11y. Supported regulatory classes. */
+#define IE_EXT_CHANNEL_SWITCH_ANNOUNCEMENT 60 /* 802.11n */
+#define IE_ADD_HT 61 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
+#define IE_ADD_HT2 53 /* 802.11n d1. ADDITIONAL HT CAPABILITY. ELEMENT ID TBD */
+
+/* For 802.11n D3.03 */
+/*#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet */
+#define IE_SECONDARY_CH_OFFSET 62 /* 802.11n D3.03 Secondary Channel Offset element */
+#define IE_WAPI 68 /* WAPI information element */
+#define IE_2040_BSS_COEXIST 72 /* 802.11n D3.0.3 */
+#define IE_2040_BSS_INTOLERANT_REPORT 73 /* 802.11n D3.03 */
+#define IE_OVERLAPBSS_SCAN_PARM 74 /* 802.11n D3.03 */
+#define IE_EXT_CAPABILITY 127 /* 802.11n D3.03 */
+
+#define IE_WPA 221 /* WPA */
+#define IE_VENDOR_SPECIFIC 221 /* Wifi WMM (WME) */
+
+#define OUI_BROADCOM_HT 51 /* */
+#define OUI_BROADCOM_HTADD 52 /* */
+#define OUI_PREN_HT_CAP 51 /* */
+#define OUI_PREN_ADD_HT 52 /* */
+
+/* CCX information */
+#define IE_AIRONET_CKIP 133 /* CCX1.0 ID 85H for CKIP */
+#define IE_AP_TX_POWER 150 /* CCX 2.0 for AP transmit power */
+#define IE_MEASUREMENT_CAPABILITY 221 /* CCX 2.0 */
#define IE_CCX_V2 221
-#define IE_AIRONET_IPADDRESS 149 // CCX ID 95H for IP Address
-#define IE_AIRONET_CCKMREASSOC 156 // CCX ID 9CH for CCKM Reassociation Request element
+#define IE_AIRONET_IPADDRESS 149 /* CCX ID 95H for IP Address */
+#define IE_AIRONET_CCKMREASSOC 156 /* CCX ID 9CH for CCKM Reassociation Request element */
#define CKIP_NEGOTIATION_LENGTH 30
#define AIRONET_IPADDRESS_LENGTH 10
#define AIRONET_CCKMREASSOC_LENGTH 24
-// ========================================================
-// MLME state machine definition
-// ========================================================
+/* ======================================================== */
+/* MLME state machine definition */
+/* ======================================================== */
-// STA MLME state mahcines
+/* STA MLME state mahcines */
#define ASSOC_STATE_MACHINE 1
#define AUTH_STATE_MACHINE 2
#define AUTH_RSP_STATE_MACHINE 3
#define SYNC_STATE_MACHINE 4
#define MLME_CNTL_STATE_MACHINE 5
#define WPA_PSK_STATE_MACHINE 6
-#define LEAP_STATE_MACHINE 7
+/*#define LEAP_STATE_MACHINE 7 */
#define AIRONET_STATE_MACHINE 8
#define ACTION_STATE_MACHINE 9
-// AP MLME state machines
+/* AP MLME state machines */
#define AP_ASSOC_STATE_MACHINE 11
#define AP_AUTH_STATE_MACHINE 12
-#define AP_AUTH_RSP_STATE_MACHINE 13
#define AP_SYNC_STATE_MACHINE 14
#define AP_CNTL_STATE_MACHINE 15
-#define AP_WPA_STATE_MACHINE 16
+#define WSC_STATE_MACHINE 17
+#define WSC_UPNP_STATE_MACHINE 18
+
+#define WPA_STATE_MACHINE 23
-//
-// STA's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* STA's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
#define CNTL_IDLE 0
#define CNTL_WAIT_DISASSOC 1
#define CNTL_WAIT_JOIN 2
#define CNTL_WAIT_AUTH2 7
#define CNTL_WAIT_OID_LIST_SCAN 8
#define CNTL_WAIT_OID_DISASSOC 9
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
#define CNTL_WAIT_SCAN_FOR_CONNECT 10
-#endif // RT2870 //
+#endif /* RTMP_MAC_USB // */
#define MT2_ASSOC_CONF 34
#define MT2_AUTH_CONF 35
#define MT2_GET_CONF 43
#define MT2_SET_CONF 44
#define MT2_RESET_CONF 45
+#define MT2_FT_OTD_CONF 46
#define MT2_MLME_ROAMING_REQ 52
#define CNTL_FUNC_SIZE 1
-//
-// STA's ASSOC state machine: states, events, total function #
-//
+/* */
+/* STA's ASSOC state machine: states, events, total function # */
+/* */
#define ASSOC_IDLE 0
#define ASSOC_WAIT_RSP 1
#define REASSOC_WAIT_RSP 2
#define ASSOC_FUNC_SIZE (MAX_ASSOC_STATE * MAX_ASSOC_MSG)
-//
-// ACT state machine: states, events, total function #
-//
+/* */
+/* ACT state machine: states, events, total function # */
+/* */
#define ACT_IDLE 0
#define MAX_ACT_STATE 1
#define ACT_MACHINE_BASE 0
-//Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self.
-//Category
+/*Those PEER_xx_CATE number is based on real Categary value in IEEE spec. Please don'es modify it by your self. */
+/*Category */
#define MT2_PEER_SPECTRUM_CATE 0
#define MT2_PEER_QOS_CATE 1
#define MT2_PEER_DLS_CATE 2
#define MT2_PEER_BA_CATE 3
#define MT2_PEER_PUBLIC_CATE 4
#define MT2_PEER_RM_CATE 5
-#define MT2_PEER_HT_CATE 7 // 7.4.7
+/* "FT_CATEGORY_BSS_TRANSITION equal to 6" is defined file of "dot11r_ft.h" */
+#define MT2_PEER_HT_CATE 7 /* 7.4.7 */
#define MAX_PEER_CATE_MSG 7
+
#define MT2_MLME_ADD_BA_CATE 8
#define MT2_MLME_ORI_DELBA_CATE 9
#define MT2_MLME_REC_DELBA_CATE 10
#define MT2_ACT_INVALID 13
#define MAX_ACT_MSG 14
-//Category field
+/*Category field */
#define CATEGORY_SPECTRUM 0
#define CATEGORY_QOS 1
#define CATEGORY_DLS 2
#define CATEGORY_RM 5
#define CATEGORY_HT 7
-
-// DLS Action frame definition
+/* DLS Action frame definition */
#define ACTION_DLS_REQUEST 0
#define ACTION_DLS_RESPONSE 1
#define ACTION_DLS_TEARDOWN 2
-//Spectrum Action field value 802.11h 7.4.1
-#define SPEC_MRQ 0 // Request
-#define SPEC_MRP 1 //Report
+/*Spectrum Action field value 802.11h 7.4.1 */
+#define SPEC_MRQ 0 /* Request */
+#define SPEC_MRP 1 /*Report */
#define SPEC_TPCRQ 2
#define SPEC_TPCRP 3
#define SPEC_CHANNEL_SWITCH 4
-
-//BA Action field value
+/*BA Action field value */
#define ADDBA_REQ 0
#define ADDBA_RESP 1
#define DELBA 2
-//Public's Action field value in Public Category. Some in 802.11y and some in 11n
-#define ACTION_BSS_2040_COEXIST 0 // 11n
-#define ACTION_DSE_ENABLEMENT 1 // 11y D9.0
-#define ACTION_DSE_DEENABLEMENT 2 // 11y D9.0
-#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 // 11y D9.0
-#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REQ 5 // 11y D9.0
-#define ACTION_DSE_MEASUREMENT_REPORT 6 // 11y D9.0
-#define ACTION_MEASUREMENT_PILOT_ACTION 7 // 11y D9.0
-#define ACTION_DSE_POWER_CONSTRAINT 8 // 11y D9.0
-
-
-//HT Action field value
+/*Public's Action field value in Public Category. Some in 802.11y and some in 11n */
+#define ACTION_BSS_2040_COEXIST 0 /* 11n */
+#define ACTION_DSE_ENABLEMENT 1 /* 11y D9.0 */
+#define ACTION_DSE_DEENABLEMENT 2 /* 11y D9.0 */
+#define ACTION_DSE_REG_LOCATION_ANNOUNCE 3 /* 11y D9.0 */
+#define ACTION_EXT_CH_SWITCH_ANNOUNCE 4 /* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REQ 5 /* 11y D9.0 */
+#define ACTION_DSE_MEASUREMENT_REPORT 6 /* 11y D9.0 */
+#define ACTION_MEASUREMENT_PILOT_ACTION 7 /* 11y D9.0 */
+#define ACTION_DSE_POWER_CONSTRAINT 8 /* 11y D9.0 */
+
+/*HT Action field value */
#define NOTIFY_BW_ACTION 0
#define SMPS_ACTION 1
#define PSMP_ACTION 2
#define HT_INFO_EXCHANGE 8
#define ACT_FUNC_SIZE (MAX_ACT_STATE * MAX_ACT_MSG)
-//
-// STA's AUTHENTICATION state machine: states, evvents, total function #
-//
+/* */
+/* STA's AUTHENTICATION state machine: states, evvents, total function # */
+/* */
#define AUTH_REQ_IDLE 0
#define AUTH_WAIT_SEQ2 1
#define AUTH_WAIT_SEQ4 2
#define AUTH_FUNC_SIZE (MAX_AUTH_STATE * MAX_AUTH_MSG)
-//
-// STA's AUTH_RSP state machine: states, events, total function #
-//
+/* */
+/* STA's AUTH_RSP state machine: states, events, total function # */
+/* */
#define AUTH_RSP_IDLE 0
#define AUTH_RSP_WAIT_CHAL 1
#define MAX_AUTH_RSP_STATE 2
#define AUTH_RSP_FUNC_SIZE (MAX_AUTH_RSP_STATE * MAX_AUTH_RSP_MSG)
-//
-// STA's SYNC state machine: states, events, total function #
-//
-#define SYNC_IDLE 0 // merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state
+/* */
+/* STA's SYNC state machine: states, events, total function # */
+/* */
+#define SYNC_IDLE 0 /* merge NO_BSS,IBSS_IDLE,IBSS_ACTIVE and BSS in to 1 state */
#define JOIN_WAIT_BEACON 1
#define SCAN_LISTEN 2
#define MAX_SYNC_STATE 3
#define SYNC_FUNC_SIZE (MAX_SYNC_STATE * MAX_SYNC_MSG)
-//Messages for the DLS state machine
+/*Messages for the DLS state machine */
#define DLS_IDLE 0
#define MAX_DLS_STATE 1
#define DLS_FUNC_SIZE (MAX_DLS_STATE * MAX_DLS_MSG)
-//
-// STA's WPA-PSK State machine: states, events, total function #
-//
-#define WPA_PSK_IDLE 0
-#define MAX_WPA_PSK_STATE 1
-
-#define WPA_MACHINE_BASE 0
-#define MT2_EAPPacket 0
-#define MT2_EAPOLStart 1
-#define MT2_EAPOLLogoff 2
-#define MT2_EAPOLKey 3
-#define MT2_EAPOLASFAlert 4
-#define MAX_WPA_PSK_MSG 5
-
-#define WPA_PSK_FUNC_SIZE (MAX_WPA_PSK_STATE * MAX_WPA_PSK_MSG)
-
-//
-// STA's CISCO-AIRONET State machine: states, events, total function #
-//
-#define AIRONET_IDLE 0
-#define AIRONET_SCANNING 1
-#define MAX_AIRONET_STATE 2
-
-#define AIRONET_MACHINE_BASE 0
-#define MT2_AIRONET_MSG 0
-#define MT2_AIRONET_SCAN_REQ 1
-#define MT2_AIRONET_SCAN_DONE 2
-#define MAX_AIRONET_MSG 3
-
-#define AIRONET_FUNC_SIZE (MAX_AIRONET_STATE * MAX_AIRONET_MSG)
-
-//
-// AP's CONTROL/CONNECT state machine: states, events, total function #
-//
+/* */
+/* WSC State machine: states, events, total function # */
+/* */
+
+/* */
+/* AP's CONTROL/CONNECT state machine: states, events, total function # */
+/* */
#define AP_CNTL_FUNC_SIZE 1
-//
-// AP's ASSOC state machine: states, events, total function #
-//
+/* */
+/* AP's ASSOC state machine: states, events, total function # */
+/* */
#define AP_ASSOC_IDLE 0
#define AP_MAX_ASSOC_STATE 1
#define AP_ASSOC_FUNC_SIZE (AP_MAX_ASSOC_STATE * AP_MAX_ASSOC_MSG)
-//
-// AP's AUTHENTICATION state machine: states, events, total function #
-//
+/* */
+/* AP's AUTHENTICATION state machine: states, events, total function # */
+/* */
#define AP_AUTH_REQ_IDLE 0
#define AP_MAX_AUTH_STATE 1
#define AP_AUTH_MACHINE_BASE 0
#define APMT2_MLME_DEAUTH_REQ 0
#define APMT2_CLS2ERR 1
-#define AP_MAX_AUTH_MSG 2
-
-#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-
-//
-// AP's AUTH-RSP state machine: states, events, total function #
-//
-#define AP_AUTH_RSP_IDLE 0
-#define AP_MAX_AUTH_RSP_STATE 1
-
-#define AP_AUTH_RSP_MACHINE_BASE 0
-#define APMT2_AUTH_CHALLENGE_TIMEOUT 0
-#define APMT2_PEER_AUTH_ODD 1
#define APMT2_PEER_DEAUTH 2
-#define AP_MAX_AUTH_RSP_MSG 3
+#define APMT2_PEER_AUTH_REQ 3
+#define APMT2_PEER_AUTH_CONFIRM 4
+#define AP_MAX_AUTH_MSG 5
-#define AP_AUTH_RSP_FUNC_SIZE (AP_MAX_AUTH_RSP_STATE * AP_MAX_AUTH_RSP_MSG)
+#define AP_AUTH_FUNC_SIZE (AP_MAX_AUTH_STATE * AP_MAX_AUTH_MSG)
-//
-// AP's SYNC state machine: states, events, total function #
-//
+/* */
+/* AP's SYNC state machine: states, events, total function # */
+/* */
#define AP_SYNC_IDLE 0
#define AP_SCAN_LISTEN 1
#define AP_MAX_SYNC_STATE 2
#define AP_SYNC_FUNC_SIZE (AP_MAX_SYNC_STATE * AP_MAX_SYNC_MSG)
-//
-// AP's WPA state machine: states, events, total function #
-//
-#define AP_WPA_PTK 0
-#define AP_MAX_WPA_PTK_STATE 1
+/* */
+/* Common WPA state machine: states, events, total function # */
+/* */
+#define WPA_PTK 0
+#define MAX_WPA_PTK_STATE 1
-#define AP_WPA_MACHINE_BASE 0
-#define APMT2_EAPPacket 0
-#define APMT2_EAPOLStart 1
-#define APMT2_EAPOLLogoff 2
-#define APMT2_EAPOLKey 3
-#define APMT2_EAPOLASFAlert 4
-#define AP_MAX_WPA_MSG 5
+#define WPA_MACHINE_BASE 0
+#define MT2_EAPPacket 0
+#define MT2_EAPOLStart 1
+#define MT2_EAPOLLogoff 2
+#define MT2_EAPOLKey 3
+#define MT2_EAPOLASFAlert 4
+#define MAX_WPA_MSG 5
-#define AP_WPA_FUNC_SIZE (AP_MAX_WPA_PTK_STATE * AP_MAX_WPA_MSG)
+#define WPA_FUNC_SIZE (MAX_WPA_PTK_STATE * MAX_WPA_MSG)
-// =============================================================================
+/* ============================================================================= */
-// value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header
+/* value domain of 802.11 header FC.Tyte, which is b3..b2 of the 1st-byte of MAC header */
#define BTYPE_MGMT 0
#define BTYPE_CNTL 1
#define BTYPE_DATA 2
-// value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 MGMT frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_ASSOC_REQ 0
#define SUBTYPE_ASSOC_RSP 1
#define SUBTYPE_REASSOC_REQ 2
#define SUBTYPE_ACTION 13
#define SUBTYPE_ACTION_NO_ACK 14
-// value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 CNTL frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_WRAPPER 7
#define SUBTYPE_BLOCK_ACK_REQ 8
#define SUBTYPE_BLOCK_ACK 9
#define SUBTYPE_CFEND 14
#define SUBTYPE_CFEND_CFACK 15
-// value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header
+/* value domain of 802.11 DATA frame's FC.subtype, which is b7..4 of the 1st-byte of MAC header */
#define SUBTYPE_DATA 0
#define SUBTYPE_DATA_CFACK 1
#define SUBTYPE_DATA_CFPOLL 2
#define SUBTYPE_QOS_CFPOLL 14
#define SUBTYPE_QOS_CFACK_CFPOLL 15
-// ACK policy of QOS Control field bit 6:5
-#define NORMAL_ACK 0x00 // b6:5 = 00
-#define NO_ACK 0x20 // b6:5 = 01
-#define NO_EXPLICIT_ACK 0x40 // b6:5 = 10
-#define BLOCK_ACK 0x60 // b6:5 = 11
+/* ACK policy of QOS Control field bit 6:5 */
+#define NORMAL_ACK 0x00 /* b6:5 = 00 */
+#define NO_ACK 0x20 /* b6:5 = 01 */
+#define NO_EXPLICIT_ACK 0x40 /* b6:5 = 10 */
+#define BLOCK_ACK 0x60 /* b6:5 = 11 */
-//
-// rtmp_data.c use these definition
-//
+/* */
+/* rtmp_data.c use these definition */
+/* */
#define LENGTH_802_11 24
#define LENGTH_802_11_AND_H 30
#define LENGTH_802_11_CRC_H 34
#define LENGTH_CRC 4
#define MAX_SEQ_NUMBER 0x0fff
#define LENGTH_802_3_NO_TYPE 12
-#define LENGTH_802_1Q 4 /* VLAN related */
+#define LENGTH_802_1Q 4 /* VLAN related */
-// STA_CSR4.field.TxResult
+/* STA_CSR4.field.TxResult */
#define TX_RESULT_SUCCESS 0
#define TX_RESULT_ZERO_LENGTH 1
#define TX_RESULT_UNDER_RUN 2
#define TX_RESULT_OHY_ERROR 4
#define TX_RESULT_RETRY_FAIL 6
-// All PHY rate summary in TXD
-// Preamble MODE in TxD
+/* All PHY rate summary in TXD */
+/* Preamble MODE in TxD */
#define MODE_CCK 0
#define MODE_OFDM 1
#define MODE_HTMIX 2
#define MODE_HTGREENFIELD 3
-// MCS for CCK. BW.SGI.STBC are reserved
-#define MCS_LONGP_RATE_1 0 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_2 1 // long preamble CCK 1Mbps
-#define MCS_LONGP_RATE_5_5 2
-#define MCS_LONGP_RATE_11 3
-#define MCS_SHORTP_RATE_1 4 // long preamble CCK 1Mbps. short is forbidden in 1Mbps
-#define MCS_SHORTP_RATE_2 5 // short preamble CCK 2Mbps
+/* MCS for CCK. BW.SGI.STBC are reserved */
+#define MCS_longP_RATE_1 0 /* long preamble CCK 1Mbps */
+#define MCS_longP_RATE_2 1 /* long preamble CCK 1Mbps */
+#define MCS_longP_RATE_5_5 2
+#define MCS_longP_RATE_11 3
+#define MCS_SHORTP_RATE_1 4 /* long preamble CCK 1Mbps. short is forbidden in 1Mbps */
+#define MCS_SHORTP_RATE_2 5 /* short preamble CCK 2Mbps */
#define MCS_SHORTP_RATE_5_5 6
#define MCS_SHORTP_RATE_11 7
-// To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved
-#define MCS_RATE_6 0 // legacy OFDM
-#define MCS_RATE_9 1 // OFDM
-#define MCS_RATE_12 2 // OFDM
-#define MCS_RATE_18 3 // OFDM
-#define MCS_RATE_24 4 // OFDM
-#define MCS_RATE_36 5 // OFDM
-#define MCS_RATE_48 6 // OFDM
-#define MCS_RATE_54 7 // OFDM
-// HT
-#define MCS_0 0 // 1S
+/* To send duplicate legacy OFDM. set BW=BW_40. SGI.STBC are reserved */
+#define MCS_RATE_6 0 /* legacy OFDM */
+#define MCS_RATE_9 1 /* OFDM */
+#define MCS_RATE_12 2 /* OFDM */
+#define MCS_RATE_18 3 /* OFDM */
+#define MCS_RATE_24 4 /* OFDM */
+#define MCS_RATE_36 5 /* OFDM */
+#define MCS_RATE_48 6 /* OFDM */
+#define MCS_RATE_54 7 /* OFDM */
+/* HT */
+#define MCS_0 0 /* 1S */
#define MCS_1 1
#define MCS_2 2
#define MCS_3 3
#define MCS_5 5
#define MCS_6 6
#define MCS_7 7
-#define MCS_8 8 // 2S
+#define MCS_8 8 /* 2S */
#define MCS_9 9
#define MCS_10 10
#define MCS_11 11
#define MCS_13 13
#define MCS_14 14
#define MCS_15 15
-#define MCS_16 16 // 3*3
+#define MCS_16 16 /* 3*3 */
#define MCS_17 17
#define MCS_18 18
#define MCS_19 19
#define MCS_32 32
#define MCS_AUTO 33
-// OID_HTPHYMODE
-// MODE
+/* OID_HTPHYMODE */
+/* MODE */
#define HTMODE_MM 0
#define HTMODE_GF 1
-// Fixed Tx MODE - HT, CCK or OFDM
+/* Fixed Tx MODE - HT, CCK or OFDM */
#define FIXED_TXMODE_HT 0
#define FIXED_TXMODE_CCK 1
#define FIXED_TXMODE_OFDM 2
-// BW
+/* BW */
#define BW_20 BAND_WIDTH_20
#define BW_40 BAND_WIDTH_40
#define BW_BOTH BAND_WIDTH_BOTH
-#define BW_10 BAND_WIDTH_10 // 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field.
+#define BW_10 BAND_WIDTH_10 /* 802.11j has 10MHz. This definition is for internal usage. doesn't fill in the IE or other field. */
-// SHORTGI
-#define GI_400 GAP_INTERVAL_400 // only support in HT mode
+/* SHORTGI */
+#define GI_400 GAP_INTERVAL_400 /* only support in HT mode */
#define GI_BOTH GAP_INTERVAL_BOTH
#define GI_800 GAP_INTERVAL_800
-// STBC
+/* STBC */
#define STBC_NONE 0
-#define STBC_USE 1 // limited use in rt2860b phy
-#define RXSTBC_ONE 1 // rx support of one spatial stream
-#define RXSTBC_TWO 2 // rx support of 1 and 2 spatial stream
-#define RXSTBC_THR 3 // rx support of 1~3 spatial stream
-// MCS FEEDBACK
-#define MCSFBK_NONE 0 // not support mcs feedback /
-#define MCSFBK_RSV 1 // reserved
-#define MCSFBK_UNSOLICIT 2 // only support unsolict mcs feedback
-#define MCSFBK_MRQ 3 // response to both MRQ and unsolict mcs feedback
-
-// MIMO power safe
+#define STBC_USE 1 /* limited use in rt2860b phy */
+#define RXSTBC_ONE 1 /* rx support of one spatial stream */
+#define RXSTBC_TWO 2 /* rx support of 1 and 2 spatial stream */
+#define RXSTBC_THR 3 /* rx support of 1~3 spatial stream */
+/* MCS FEEDBACK */
+#define MCSFBK_NONE 0 /* not support mcs feedback / */
+#define MCSFBK_RSV 1 /* reserved */
+#define MCSFBK_UNSOLICIT 2 /* only support unsolict mcs feedback */
+#define MCSFBK_MRQ 3 /* response to both MRQ and unsolict mcs feedback */
+
+/* MIMO power safe */
#define MMPS_STATIC 0
#define MMPS_DYNAMIC 1
#define MMPS_RSV 2
#define MMPS_ENABLE 3
-
-// A-MSDU size
+/* A-MSDU size */
#define AMSDU_0 0
#define AMSDU_1 1
-// MCS use 7 bits
+/* MCS use 7 bits */
#define TXRATEMIMO 0x80
#define TXRATEMCS 0x7F
#define TXRATEOFDM 0x7F
#define RATE_2 1
#define RATE_5_5 2
#define RATE_11 3
-#define RATE_6 4 // OFDM
-#define RATE_9 5 // OFDM
-#define RATE_12 6 // OFDM
-#define RATE_18 7 // OFDM
-#define RATE_24 8 // OFDM
-#define RATE_36 9 // OFDM
-#define RATE_48 10 // OFDM
-#define RATE_54 11 // OFDM
+#define RATE_6 4 /* OFDM */
+#define RATE_9 5 /* OFDM */
+#define RATE_12 6 /* OFDM */
+#define RATE_18 7 /* OFDM */
+#define RATE_24 8 /* OFDM */
+#define RATE_36 9 /* OFDM */
+#define RATE_48 10 /* OFDM */
+#define RATE_54 11 /* OFDM */
#define RATE_FIRST_OFDM_RATE RATE_6
#define RATE_LAST_OFDM_RATE RATE_54
-#define RATE_6_5 12 // HT mix
-#define RATE_13 13 // HT mix
-#define RATE_19_5 14 // HT mix
-#define RATE_26 15 // HT mix
-#define RATE_39 16 // HT mix
-#define RATE_52 17 // HT mix
-#define RATE_58_5 18 // HT mix
-#define RATE_65 19 // HT mix
-#define RATE_78 20 // HT mix
-#define RATE_104 21 // HT mix
-#define RATE_117 22 // HT mix
-#define RATE_130 23 // HT mix
-//#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only
+#define RATE_6_5 12 /* HT mix */
+#define RATE_13 13 /* HT mix */
+#define RATE_19_5 14 /* HT mix */
+#define RATE_26 15 /* HT mix */
+#define RATE_39 16 /* HT mix */
+#define RATE_52 17 /* HT mix */
+#define RATE_58_5 18 /* HT mix */
+#define RATE_65 19 /* HT mix */
+#define RATE_78 20 /* HT mix */
+#define RATE_104 21 /* HT mix */
+#define RATE_117 22 /* HT mix */
+#define RATE_130 23 /* HT mix */
+/*#define RATE_AUTO_SWITCH 255 // for StaCfg.FixedTxRate only */
#define HTRATE_0 12
#define RATE_FIRST_MM_RATE HTRATE_0
#define RATE_FIRST_HT_RATE HTRATE_0
#define RATE_LAST_HT_RATE HTRATE_0
-// pTxWI->txop
-#define IFS_HTTXOP 0 // The txop will be handles by ASIC.
+/* pTxWI->txop */
+#define IFS_HTTXOP 0 /* The txop will be handles by ASIC. */
#define IFS_PIFS 1
#define IFS_SIFS 2
#define IFS_BACKOFF 3
-// pTxD->RetryMode
-#define LONG_RETRY 1
+/* pTxD->RetryMode */
+#define long_RETRY 1
#define SHORT_RETRY 0
-// Country Region definition
+/* Country Region definition */
#define REGION_MINIMUM_BG_BAND 0
-#define REGION_0_BG_BAND 0 // 1-11
-#define REGION_1_BG_BAND 1 // 1-13
-#define REGION_2_BG_BAND 2 // 10-11
-#define REGION_3_BG_BAND 3 // 10-13
-#define REGION_4_BG_BAND 4 // 14
-#define REGION_5_BG_BAND 5 // 1-14
-#define REGION_6_BG_BAND 6 // 3-9
-#define REGION_7_BG_BAND 7 // 5-13
-#define REGION_31_BG_BAND 31 // 5-13
+#define REGION_0_BG_BAND 0 /* 1-11 */
+#define REGION_1_BG_BAND 1 /* 1-13 */
+#define REGION_2_BG_BAND 2 /* 10-11 */
+#define REGION_3_BG_BAND 3 /* 10-13 */
+#define REGION_4_BG_BAND 4 /* 14 */
+#define REGION_5_BG_BAND 5 /* 1-14 */
+#define REGION_6_BG_BAND 6 /* 3-9 */
+#define REGION_7_BG_BAND 7 /* 5-13 */
+#define REGION_31_BG_BAND 31 /* 5-13 */
#define REGION_MAXIMUM_BG_BAND 7
#define REGION_MINIMUM_A_BAND 0
-#define REGION_0_A_BAND 0 // 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
-#define REGION_1_A_BAND 1 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-#define REGION_2_A_BAND 2 // 36, 40, 44, 48, 52, 56, 60, 64
-#define REGION_3_A_BAND 3 // 52, 56, 60, 64, 149, 153, 157, 161
-#define REGION_4_A_BAND 4 // 149, 153, 157, 161, 165
-#define REGION_5_A_BAND 5 // 149, 153, 157, 161
-#define REGION_6_A_BAND 6 // 36, 40, 44, 48
-#define REGION_7_A_BAND 7 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_8_A_BAND 8 // 52, 56, 60, 64
-#define REGION_9_A_BAND 9 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
-#define REGION_10_A_BAND 10 // 36, 40, 44, 48, 149, 153, 157, 161, 165
-#define REGION_11_A_BAND 11 // 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161
-#define REGION_MAXIMUM_A_BAND 11
-
-// pTxD->CipherAlg
+#define REGION_0_A_BAND 0 /* 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 */
+#define REGION_1_A_BAND 1 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_2_A_BAND 2 /* 36, 40, 44, 48, 52, 56, 60, 64 */
+#define REGION_3_A_BAND 3 /* 52, 56, 60, 64, 149, 153, 157, 161 */
+#define REGION_4_A_BAND 4 /* 149, 153, 157, 161, 165 */
+#define REGION_5_A_BAND 5 /* 149, 153, 157, 161 */
+#define REGION_6_A_BAND 6 /* 36, 40, 44, 48 */
+#define REGION_7_A_BAND 7 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173 */
+#define REGION_8_A_BAND 8 /* 52, 56, 60, 64 */
+#define REGION_9_A_BAND 9 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_10_A_BAND 10 /* 36, 40, 44, 48, 149, 153, 157, 161, 165 */
+#define REGION_11_A_BAND 11 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161 */
+#define REGION_12_A_BAND 12 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 */
+#define REGION_13_A_BAND 13 /* 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161 */
+#define REGION_14_A_BAND 14 /* 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165 */
+#define REGION_15_A_BAND 15 /* 149, 153, 157, 161, 165, 169, 173 */
+#define REGION_MAXIMUM_A_BAND 15
+
+/* pTxD->CipherAlg */
#define CIPHER_NONE 0
#define CIPHER_WEP64 1
#define CIPHER_WEP128 2
#define CIPHER_AES 4
#define CIPHER_CKIP64 5
#define CIPHER_CKIP128 6
-#define CIPHER_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table
+#define CIPHER_TKIP_NO_MIC 7 /* MIC appended by driver: not a valid value in hardware key table */
#define CIPHER_SMS4 8
-// value domain of pAd->RfIcType
-#define RFIC_2820 1 // 2.4G 2T3R
-#define RFIC_2850 2 // 2.4G/5G 2T3R
-#define RFIC_2720 3 // 2.4G 1T2R
-#define RFIC_2750 4 // 2.4G/5G 1T2R
-#define RFIC_3020 5 // 2.4G 1T1R
-#define RFIC_2020 6 // 2.4G B/G
-#define RFIC_3021 7 // 2.4G 1T2R
-#define RFIC_3022 8 // 2.4G 2T2R
-
-// LED Status.
+/* LED Status. */
#define LED_LINK_DOWN 0
#define LED_LINK_UP 1
#define LED_RADIO_OFF 2
#define LED_ON_SITE_SURVEY 6
#define LED_POWER_UP 7
-// value domain of pAd->LedCntl.LedMode and E2PROM
+/* value domain of pAd->LedCntl.LedMode and E2PROM */
#define LED_MODE_DEFAULT 0
#define LED_MODE_TWO_LED 1
-#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8
+/*#define LED_MODE_SIGNAL_STREGTH 8 // EEPROM define =8 */
+#define LED_MODE_SIGNAL_STREGTH 0x40 /* EEPROM define = 64 */
-// RC4 init value, used fro WEP & TKIP
-#define PPPINITFCS32 0xffffffff /* Initial FCS value */
+/* RC4 init value, used fro WEP & TKIP */
+#define PPPINITFCS32 0xffffffff /* Initial FCS value */
-// value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition
+/* value domain of pAd->StaCfg.PortSecured. 802.1X controlled port definition */
#define WPA_802_1X_PORT_SECURED 1
#define WPA_802_1X_PORT_NOT_SECURED 2
#define PAIRWISE_KEY 1
#define GROUP_KEY 2
-//definition of DRS
+/*definition of DRS */
#define MAX_STEP_OF_TX_RATE_SWITCH 32
-
-// pre-allocated free NDIS PACKET/BUFFER poll for internal usage
+/* pre-allocated free NDIS PACKET/BUFFER poll for internal usage */
#define MAX_NUM_OF_FREE_NDIS_PACKET 128
-//Block ACK
+/*Block ACK */
#define MAX_TX_REORDERBUF 64
#define MAX_RX_REORDERBUF 64
#define DEFAULT_TX_TIMEOUT 30
#define DEFAULT_RX_TIMEOUT 30
-// definition of Recipient or Originator
+/* definition of Recipient or Originator */
#define I_RECIPIENT TRUE
#define I_ORIGINATOR FALSE
#define DEFAULT_RF_TX_POWER 5
#define MAX_INI_BUFFER_SIZE 4096
-#define MAX_PARAM_BUFFER_SIZE (2048) // enough for ACL (18*64)
- //18 : the length of Mac address acceptable format "01:02:03:04:05:06;")
- //64 : MAX_NUM_OF_ACL_LIST
-// definition of pAd->OpMode
+#define MAX_PARAM_BUFFER_SIZE (2048) /* enough for ACL (18*64) */
+ /*18 : the length of Mac address acceptable format "01:02:03:04:05:06;") */
+ /*64 : MAX_NUM_OF_ACL_LIST */
+/* definition of pAd->OpMode */
#define OPMODE_STA 0
#define OPMODE_AP 1
-//#define OPMODE_L3_BRG 2 // as AP and STA at the same time
-
-// ========================= AP rtmp_def.h ===========================
-// value domain for pAd->EventTab.Log[].Event
-#define EVENT_RESET_ACCESS_POINT 0 // Log = "hh:mm:ss Restart Access Point"
-#define EVENT_ASSOCIATED 1 // Log = "hh:mm:ss STA 00:01:02:03:04:05 associated"
-#define EVENT_DISASSOCIATED 2 // Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS"
-#define EVENT_AGED_OUT 3 // Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS"
+/*#define OPMODE_L3_BRG 2 // as AP and STA at the same time */
+
+/* ========================= AP rtmp_def.h =========================== */
+/* value domain for pAd->EventTab.Log[].Event */
+#define EVENT_RESET_ACCESS_POint 0 /* Log = "hh:mm:ss Restart Access Point" */
+#define EVENT_ASSOCIATED 1 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 associated" */
+#define EVENT_DISASSOCIATED 2 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 left this BSS" */
+#define EVENT_AGED_OUT 3 /* Log = "hh:mm:ss STA 00:01:02:03:04:05 was aged-out and removed from this BSS" */
#define EVENT_COUNTER_M 4
#define EVENT_INVALID_PSK 5
#define EVENT_MAX_EVENT_TYPE 6
-// ==== end of AP rtmp_def.h ============
+/* ==== end of AP rtmp_def.h ============ */
-// definition RSSI Number
+/* definition RSSI Number */
#define RSSI_0 0
#define RSSI_1 1
#define RSSI_2 2
-// definition of radar detection
-#define RD_NORMAL_MODE 0 // Not found radar signal
-#define RD_SWITCHING_MODE 1 // Found radar signal, and doing channel switch
-#define RD_SILENCE_MODE 2 // After channel switch, need to be silence a while to ensure radar not found
+/* definition of radar detection */
+#define RD_NORMAL_MODE 0 /* Not found radar signal */
+#define RD_SWITCHING_MODE 1 /* Found radar signal, and doing channel switch */
+#define RD_SILENCE_MODE 2 /* After channel switch, need to be silence a while to ensure radar not found */
-//Driver defined cid for mapping status and command.
+/*Driver defined cid for mapping status and command. */
#define SLEEPCID 0x11
#define WAKECID 0x22
#define QUERYPOWERCID 0x33
#define OWNERMCU 0x1
#define OWNERCPU 0x0
-// MBSSID definition
+/* MBSSID definition */
#define ENTRY_NOT_FOUND 0xFF
-
/* After Linux 2.6.9,
* VLAN module use Private (from user) interface flags (netdevice->priv_flags).
* #define IFF_802_1Q_VLAN 0x1 -- 802.1Q VLAN device. in if.h
#define INT_APCLI 0x0400
#define INT_MESH 0x0500
-// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
+#define INF_MAIN_DEV_NAME "wlan"
+#define INF_MBSSID_DEV_NAME "ra"
+#define INF_WDS_DEV_NAME "wds"
+#define INF_APCLI_DEV_NAME "apcli"
+#define INF_MESH_DEV_NAME "mesh"
-// WEP Key TYPE
+/* WEP Key TYPE */
#define WEP_HEXADECIMAL_TYPE 0
#define WEP_ASCII_TYPE 1
-
-
-// WIRELESS EVENTS definition
+/* WIRELESS EVENTS definition */
/* Max number of char in custom event, refer to wireless_tools.28/wireless.20.h */
#define IW_CUSTOM_MAX_LEN 255 /* In bytes */
-// For system event - start
+/* For system event - start */
#define IW_SYS_EVENT_FLAG_START 0x0200
#define IW_ASSOC_EVENT_FLAG 0x0200
#define IW_DISASSOC_EVENT_FLAG 0x0201
#define IW_STA_LINKDOWN_EVENT_FLAG 0x0210
#define IW_SCAN_COMPLETED_EVENT_FLAG 0x0211
#define IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG 0x0212
-// if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END
+/* if add new system event flag, please upadte the IW_SYS_EVENT_FLAG_END */
#define IW_SYS_EVENT_FLAG_END 0x0212
#define IW_SYS_EVENT_TYPE_NUM (IW_SYS_EVENT_FLAG_END - IW_SYS_EVENT_FLAG_START + 1)
-// For system event - end
+/* For system event - end */
-// For spoof attack event - start
+/* For spoof attack event - start */
#define IW_SPOOF_EVENT_FLAG_START 0x0300
#define IW_CONFLICT_SSID_EVENT_FLAG 0x0300
#define IW_SPOOF_ASSOC_RESP_EVENT_FLAG 0x0301
#define IW_SPOOF_DEAUTH_EVENT_FLAG 0x0307
#define IW_SPOOF_UNKNOWN_MGMT_EVENT_FLAG 0x0308
#define IW_REPLAY_ATTACK_EVENT_FLAG 0x0309
-// if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END
+/* if add new spoof attack event flag, please upadte the IW_SPOOF_EVENT_FLAG_END */
#define IW_SPOOF_EVENT_FLAG_END 0x0309
#define IW_SPOOF_EVENT_TYPE_NUM (IW_SPOOF_EVENT_FLAG_END - IW_SPOOF_EVENT_FLAG_START + 1)
-// For spoof attack event - end
+/* For spoof attack event - end */
-// For flooding attack event - start
+/* For flooding attack event - start */
#define IW_FLOOD_EVENT_FLAG_START 0x0400
#define IW_FLOOD_AUTH_EVENT_FLAG 0x0400
#define IW_FLOOD_ASSOC_REQ_EVENT_FLAG 0x0401
#define IW_FLOOD_DISASSOC_EVENT_FLAG 0x0404
#define IW_FLOOD_DEAUTH_EVENT_FLAG 0x0405
#define IW_FLOOD_EAP_REQ_EVENT_FLAG 0x0406
-// if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END
+/* if add new flooding attack event flag, please upadte the IW_FLOOD_EVENT_FLAG_END */
#define IW_FLOOD_EVENT_FLAG_END 0x0406
#define IW_FLOOD_EVENT_TYPE_NUM (IW_FLOOD_EVENT_FLAG_END - IW_FLOOD_EVENT_FLAG_START + 1)
-// For flooding attack - end
+/* For flooding attack - end */
-// End - WIRELESS EVENTS definition
+/* End - WIRELESS EVENTS definition */
-// definition for DLS, kathy
+/* definition for DLS, kathy */
#define MAX_NUM_OF_INIT_DLS_ENTRY 1
#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
-//Block ACK , rt2860, kathy
+/*Block ACK, kathy */
#define MAX_TX_REORDERBUF 64
#define MAX_RX_REORDERBUF 64
#define DEFAULT_TX_TIMEOUT 30
#define IW_ESSID_MAX_SIZE 32
#endif
-#ifdef MCAST_RATE_SPECIFIC
-#define MCAST_DISABLE 0
-#define MCAST_CCK 1
-#define MCAST_OFDM 2
-#define MCAST_HTMIX 3
-#endif // MCAST_RATE_SPECIFIC //
-
-#ifdef RT2860
-// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function
-// This is to indicate from where to call this function.
-#define DOT11POWERSAVE 0 // TO do .11 power save sleep
-#define GUIRADIO_OFF 1 // To perform Radio OFf command from GUI
-#define RTMP_HALT 2 // Called from Halt handler.
-#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP
-#define FROM_TX 4 // Force wake up from Tx packet.
-#endif
-#ifdef RT2870
-// For AsicRadioOff/AsicRadioOn function
+/* For AsicRadioOff/AsicRadioOn function */
#define DOT11POWERSAVE 0
#define GUIRADIO_OFF 1
#define RTMP_HALT 2
#define GUI_IDLE_POWER_SAVE 3
-#endif
+/* -- */
-// definition for WpaSupport flag
+/* definition for WpaSupport flag */
#define WPA_SUPPLICANT_DISABLE 0
#define WPA_SUPPLICANT_ENABLE 1
#define WPA_SUPPLICANT_ENABLE_WITH_WEB_UI 2
-// Endian byte swapping codes
+/* Endian byte swapping codes */
#define SWAP16(x) \
- ((UINT16)( \
- (((UINT16)(x) & (UINT16) 0x00ffU) << 8) | \
- (((UINT16)(x) & (UINT16) 0xff00U) >> 8) ))
+ ((u16)( \
+ (((u16)(x) & (u16)0x00ffU) << 8) | \
+ (((u16)(x) & (u16)0xff00U) >> 8) ))
#define SWAP32(x) \
- ((UINT32)( \
- (((UINT32)(x) & (UINT32) 0x000000ffUL) << 24) | \
- (((UINT32)(x) & (UINT32) 0x0000ff00UL) << 8) | \
- (((UINT32)(x) & (UINT32) 0x00ff0000UL) >> 8) | \
- (((UINT32)(x) & (UINT32) 0xff000000UL) >> 24) ))
+ ((u32)( \
+ (((u32)(x) & (u32)0x000000ffUL) << 24) | \
+ (((u32)(x) & (u32)0x0000ff00UL) << 8) | \
+ (((u32)(x) & (u32)0x00ff0000UL) >> 8) | \
+ (((u32)(x) & (u32)0xff000000UL) >> 24) ))
#define SWAP64(x) \
- ((UINT64)( \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000000000ffULL) << 56) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000000000ff00ULL) << 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000000000ff0000ULL) << 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00000000ff000000ULL) << 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x000000ff00000000ULL) >> 8) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x0000ff0000000000ULL) >> 24) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0x00ff000000000000ULL) >> 40) | \
- (UINT64)(((UINT64)(x) & (UINT64) 0xff00000000000000ULL) >> 56) ))
-
-#define cpu2le64(x) ((UINT64)(x))
-#define le2cpu64(x) ((UINT64)(x))
-#define cpu2le32(x) ((UINT32)(x))
-#define le2cpu32(x) ((UINT32)(x))
-#define cpu2le16(x) ((UINT16)(x))
-#define le2cpu16(x) ((UINT16)(x))
+ ((u64)( \
+ (u64)(((u64)(x) & (u64)0x00000000000000ffULL) << 56) | \
+ (u64)(((u64)(x) & (u64)0x000000000000ff00ULL) << 40) | \
+ (u64)(((u64)(x) & (u64)0x0000000000ff0000ULL) << 24) | \
+ (u64)(((u64)(x) & (u64)0x00000000ff000000ULL) << 8) | \
+ (u64)(((u64)(x) & (u64)0x000000ff00000000ULL) >> 8) | \
+ (u64)(((u64)(x) & (u64)0x0000ff0000000000ULL) >> 24) | \
+ (u64)(((u64)(x) & (u64)0x00ff000000000000ULL) >> 40) | \
+ (u64)(((u64)(x) & (u64)0xff00000000000000ULL) >> 56) ))
+
+#define cpu2le64(x) ((u64)(x))
+#define le2cpu64(x) ((u64)(x))
+#define cpu2le32(x) ((u32)(x))
+#define le2cpu32(x) ((u32)(x))
+#define cpu2le16(x) ((u16)(x))
+#define le2cpu16(x) ((u16)(x))
#define cpu2be64(x) SWAP64((x))
#define be2cpu64(x) SWAP64((x))
#define cpu2be32(x) SWAP32((x))
#define cpu2be16(x) SWAP16((x))
#define be2cpu16(x) SWAP16((x))
-#endif // __RTMP_DEF_H__
-
-
+#define ABS(_x, _y) ((_x) > (_y)) ? ((_x) -(_y)) : ((_y) -(_x))
+
+#define A2Dec(_X, _p) \
+{ \
+ u8 *p; \
+ _X = 0; \
+ p = _p; \
+ while (((*p >= '0') && (*p <= '9'))) \
+ { \
+ if ((*p >= '0') && (*p <= '9')) \
+ _X = _X * 10 + *p - 48; \
+ p++; \
+ } \
+}
+
+#define A2Hex(_X, _p) \
+do{ \
+ char *__p; \
+ (_X) = 0; \
+ __p = (char *)(_p); \
+ while (((*__p >= 'a') && (*__p <= 'f')) || ((*__p >= 'A') && (*__p <= 'F')) || ((*__p >= '0') && (*__p <= '9'))) \
+ { \
+ if ((*__p >= 'a') && (*__p <= 'f')) \
+ (_X) = (_X) * 16 + *__p - 87; \
+ else if ((*__p >= 'A') && (*__p <= 'F')) \
+ (_X) = (_X) * 16 + *__p - 55; \
+ else if ((*__p >= '0') && (*__p <= '9')) \
+ (_X) = (_X) * 16 + *__p - 48; \
+ __p++; \
+ } \
+}while(0)
+
+#endif /* __RTMP_DEF_H__ */
projects / linux-flexiantxendom0-3.2.10.git / blobdiff