#include <asm/processor.h>
#include <linux/io.h>
-
-/* Generic southbridge functions */
-
-#define GEODE_DEV_PMS 0
-#define GEODE_DEV_ACPI 1
-#define GEODE_DEV_GPIO 2
-#define GEODE_DEV_MFGPT 3
-
-extern int geode_get_dev_base(unsigned int dev);
-
-/* Useful macros */
-#define geode_pms_base() geode_get_dev_base(GEODE_DEV_PMS)
-#define geode_acpi_base() geode_get_dev_base(GEODE_DEV_ACPI)
-#define geode_gpio_base() geode_get_dev_base(GEODE_DEV_GPIO)
-#define geode_mfgpt_base() geode_get_dev_base(GEODE_DEV_MFGPT)
-
-/* MSRS */
-
-#define MSR_GLIU_P2D_RO0 0x10000029
-
-#define MSR_LX_GLD_MSR_CONFIG 0x48002001
-#define MSR_LX_MSR_PADSEL 0x48002011 /* NOT 0x48000011; the data
- * sheet has the wrong value */
-#define MSR_GLCP_SYS_RSTPLL 0x4C000014
-#define MSR_GLCP_DOTPLL 0x4C000015
-
-#define MSR_LBAR_SMB 0x5140000B
-#define MSR_LBAR_GPIO 0x5140000C
-#define MSR_LBAR_MFGPT 0x5140000D
-#define MSR_LBAR_ACPI 0x5140000E
-#define MSR_LBAR_PMS 0x5140000F
-
-#define MSR_DIVIL_SOFT_RESET 0x51400017
-
-#define MSR_PIC_YSEL_LOW 0x51400020
-#define MSR_PIC_YSEL_HIGH 0x51400021
-#define MSR_PIC_ZSEL_LOW 0x51400022
-#define MSR_PIC_ZSEL_HIGH 0x51400023
-#define MSR_PIC_IRQM_LPC 0x51400025
-
-#define MSR_MFGPT_IRQ 0x51400028
-#define MSR_MFGPT_NR 0x51400029
-#define MSR_MFGPT_SETUP 0x5140002B
-
-#define MSR_LX_SPARE_MSR 0x80000011 /* DC-specific */
-
-#define MSR_GX_GLD_MSR_CONFIG 0xC0002001
-#define MSR_GX_MSR_PADSEL 0xC0002011
-
-/* Resource Sizes */
-
-#define LBAR_GPIO_SIZE 0xFF
-#define LBAR_MFGPT_SIZE 0x40
-#define LBAR_ACPI_SIZE 0x40
-#define LBAR_PMS_SIZE 0x80
-
-/* ACPI registers (PMS block) */
-
-/*
- * PM1_EN is only valid when VSA is enabled for 16 bit reads.
- * When VSA is not enabled, *always* read both PM1_STS and PM1_EN
- * with a 32 bit read at offset 0x0
- */
-
-#define PM1_STS 0x00
-#define PM1_EN 0x02
-#define PM1_CNT 0x08
-#define PM2_CNT 0x0C
-#define PM_TMR 0x10
-#define PM_GPE0_STS 0x18
-#define PM_GPE0_EN 0x1C
-
-/* PMC registers (PMS block) */
-
-#define PM_SSD 0x00
-#define PM_SCXA 0x04
-#define PM_SCYA 0x08
-#define PM_OUT_SLPCTL 0x0C
-#define PM_SCLK 0x10
-#define PM_SED 0x1
-#define PM_SCXD 0x18
-#define PM_SCYD 0x1C
-#define PM_IN_SLPCTL 0x20
-#define PM_WKD 0x30
-#define PM_WKXD 0x34
-#define PM_RD 0x38
-#define PM_WKXA 0x3C
-#define PM_FSD 0x40
-#define PM_TSD 0x44
-#define PM_PSD 0x48
-#define PM_NWKD 0x4C
-#define PM_AWKD 0x50
-#define PM_SSC 0x54
-
-/* VSA2 magic values */
-
-#define VSA_VRC_INDEX 0xAC1C
-#define VSA_VRC_DATA 0xAC1E
-#define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */
-#define VSA_VR_SIGNATURE 0x0003
-#define VSA_VR_MEM_SIZE 0x0200
-#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */
-#define GSW_VSA_SIG 0x534d /* General Software signature */
-/* GPIO */
-
-#define GPIO_OUTPUT_VAL 0x00
-#define GPIO_OUTPUT_ENABLE 0x04
-#define GPIO_OUTPUT_OPEN_DRAIN 0x08
-#define GPIO_OUTPUT_INVERT 0x0C
-#define GPIO_OUTPUT_AUX1 0x10
-#define GPIO_OUTPUT_AUX2 0x14
-#define GPIO_PULL_UP 0x18
-#define GPIO_PULL_DOWN 0x1C
-#define GPIO_INPUT_ENABLE 0x20
-#define GPIO_INPUT_INVERT 0x24
-#define GPIO_INPUT_FILTER 0x28
-#define GPIO_INPUT_EVENT_COUNT 0x2C
-#define GPIO_READ_BACK 0x30
-#define GPIO_INPUT_AUX1 0x34
-#define GPIO_EVENTS_ENABLE 0x38
-#define GPIO_LOCK_ENABLE 0x3C
-#define GPIO_POSITIVE_EDGE_EN 0x40
-#define GPIO_NEGATIVE_EDGE_EN 0x44
-#define GPIO_POSITIVE_EDGE_STS 0x48
-#define GPIO_NEGATIVE_EDGE_STS 0x4C
-
-#define GPIO_MAP_X 0xE0
-#define GPIO_MAP_Y 0xE4
-#define GPIO_MAP_Z 0xE8
-#define GPIO_MAP_W 0xEC
-
-static inline u32 geode_gpio(unsigned int nr)
-{
- BUG_ON(nr > 28);
- return 1 << nr;
-}
-
-extern void geode_gpio_set(u32, unsigned int);
-extern void geode_gpio_clear(u32, unsigned int);
-extern int geode_gpio_isset(u32, unsigned int);
-extern void geode_gpio_setup_event(unsigned int, int, int);
-extern void geode_gpio_set_irq(unsigned int, unsigned int);
-
-static inline void geode_gpio_event_irq(unsigned int gpio, int pair)
-{
- geode_gpio_setup_event(gpio, pair, 0);
-}
-
-static inline void geode_gpio_event_pme(unsigned int gpio, int pair)
-{
- geode_gpio_setup_event(gpio, pair, 1);
-}
-
-/* Specific geode tests */
+#include <linux/cs5535.h>
static inline int is_geode_gx(void)
{
return (is_geode_gx() || is_geode_lx());
}
-#ifdef CONFIG_MGEODE_LX
-extern int geode_has_vsa2(void);
-#else
-static inline int geode_has_vsa2(void)
-{
- return 0;
-}
-#endif
-
-/* MFGPTs */
-
-#define MFGPT_MAX_TIMERS 8
-#define MFGPT_TIMER_ANY (-1)
-
-#define MFGPT_DOMAIN_WORKING 1
-#define MFGPT_DOMAIN_STANDBY 2
-#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-
-#define MFGPT_CMP1 0
-#define MFGPT_CMP2 1
-
-#define MFGPT_EVENT_IRQ 0
-#define MFGPT_EVENT_NMI 1
-#define MFGPT_EVENT_RESET 3
-
-#define MFGPT_REG_CMP1 0
-#define MFGPT_REG_CMP2 2
-#define MFGPT_REG_COUNTER 4
-#define MFGPT_REG_SETUP 6
-
-#define MFGPT_SETUP_CNTEN (1 << 15)
-#define MFGPT_SETUP_CMP2 (1 << 14)
-#define MFGPT_SETUP_CMP1 (1 << 13)
-#define MFGPT_SETUP_SETUP (1 << 12)
-#define MFGPT_SETUP_STOPEN (1 << 11)
-#define MFGPT_SETUP_EXTEN (1 << 10)
-#define MFGPT_SETUP_REVEN (1 << 5)
-#define MFGPT_SETUP_CLKSEL (1 << 4)
-
-static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
- outw(value, base + reg + (timer * 8));
-}
-
-static inline u16 geode_mfgpt_read(int timer, u16 reg)
-{
- u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);
- return inw(base + reg + (timer * 8));
-}
-
-extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
-extern int geode_mfgpt_alloc_timer(int timer, int domain);
-
-#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
-#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0)
-
-#ifdef CONFIG_GEODE_MFGPT_TIMER
-extern int __init mfgpt_timer_setup(void);
-#else
-static inline int mfgpt_timer_setup(void) { return 0; }
-#endif
-
#endif /* _ASM_X86_GEODE_H */
projects / linux-flexiantxendom0-3.2.10.git / blobdiff