*
* Name: ski2c.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.30 $
- * Date: $Date: 2001/04/05 11:38:09 $
+ * Version: $Revision: 1.34 $
+ * Date: $Date: 2003/01/28 09:11:21 $
* Purpose: Defines to access Voltage and Temperature Sensor
- * (taken from Monalisa (taken from Concentrator))
*
******************************************************************************/
/******************************************************************************
*
- * (C)Copyright 1998,1999 SysKonnect,
- * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ * (C)Copyright 1998-2003 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* History:
*
* $Log: ski2c.h,v $
+ * Revision 1.34 2003/01/28 09:11:21 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.33 2002/10/14 16:40:50 rschmidt
+ * Editorial changes (TWSI)
+ *
+ * Revision 1.32 2002/08/13 08:55:07 rschmidt
+ * Editorial changes
+ *
+ * Revision 1.31 2002/08/06 09:44:22 jschmalz
+ * Extensions and changes for Yukon
+ *
* Revision 1.30 2001/04/05 11:38:09 rassmann
* Set SenState to idle in SkI2cWaitIrq().
* Changed error message in SkI2cWaitIrq().
#include "h/skgei2c.h"
/*
- * Define the I2c events.
+ * Define the I2C events.
*/
#define SK_I2CEV_IRQ 1 /* IRQ happened Event */
#define SK_I2CEV_TIM 2 /* Timeout event */
-#define SK_I2CEV_CLEAR 3 /* Clear Mib Values */
+#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */
/*
* Define READ and WRITE Constants.
*/
-#define I2C_READ 0
-#define I2C_WRITE 1
+#define I2C_READ 0
+#define I2C_WRITE 1
#define I2C_BURST 1
-#define I2C_SIGLE 0
+#define I2C_SINGLE 0
-#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
-#define SKERR_I2C_E001MSG "Sensor index unknown"
-#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
-#define SKERR_I2C_E002MSG "I2C: transfer does not complete.\n"
-#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
-#define SKERR_I2C_E003MSG "lm80: NAK on device send.\n"
-#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
-#define SKERR_I2C_E004MSG "lm80: NAK on register send.\n"
-#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
-#define SKERR_I2C_E005MSG "lm80: NAK on device (2) send.\n"
-#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
-#define SKERR_I2C_E006MSG "Unknown event"
-#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
-#define SKERR_I2C_E007MSG "LM80 read out of state"
-#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
-#define SKERR_I2C_E008MSG "unexpected sensor read completed"
-#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
-#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
-#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
-#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
-#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
-#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
-#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
-#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
-#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
-#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
-#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
-#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
-#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
-#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
-#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
-#define SKERR_I2C_E016MSG "I2C: active transfer does not complete.\n"
+#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0)
+#define SKERR_I2C_E001MSG "Sensor index unknown"
+#define SKERR_I2C_E002 (SKERR_I2C_E001+1)
+#define SKERR_I2C_E002MSG "TWSI: transfer does not complete"
+#define SKERR_I2C_E003 (SKERR_I2C_E002+1)
+#define SKERR_I2C_E003MSG "LM80: NAK on device send"
+#define SKERR_I2C_E004 (SKERR_I2C_E003+1)
+#define SKERR_I2C_E004MSG "LM80: NAK on register send"
+#define SKERR_I2C_E005 (SKERR_I2C_E004+1)
+#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send"
+#define SKERR_I2C_E006 (SKERR_I2C_E005+1)
+#define SKERR_I2C_E006MSG "Unknown event"
+#define SKERR_I2C_E007 (SKERR_I2C_E006+1)
+#define SKERR_I2C_E007MSG "LM80 read out of state"
+#define SKERR_I2C_E008 (SKERR_I2C_E007+1)
+#define SKERR_I2C_E008MSG "Unexpected sensor read completed"
+#define SKERR_I2C_E009 (SKERR_I2C_E008+1)
+#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range"
+#define SKERR_I2C_E010 (SKERR_I2C_E009+1)
+#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range"
+#define SKERR_I2C_E011 (SKERR_I2C_E010+1)
+#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range"
+#define SKERR_I2C_E012 (SKERR_I2C_E011+1)
+#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range"
+#define SKERR_I2C_E013 (SKERR_I2C_E012+1)
+#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor"
+#define SKERR_I2C_E014 (SKERR_I2C_E013+1)
+#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range"
+#define SKERR_I2C_E015 (SKERR_I2C_E014+1)
+#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range"
+#define SKERR_I2C_E016 (SKERR_I2C_E015+1)
+#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete"
/*
* Define Timeout values
*/
-#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
-#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
+#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */
+#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */
+#define SK_I2C_TIM_WATCH 1000000L /* 1 second */
/*
* Define trap and error log hold times
*/
#ifndef SK_SEN_ERR_TR_HOLD
-#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
+#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_ERR_LOG_HOLD
-#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
+#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_WARN_TR_HOLD
-#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
+#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC)
#endif
#ifndef SK_SEN_WARN_LOG_HOLD
-#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
+#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC)
#endif
/*
* Defines for SenType
*/
-#define SK_SEN_TEMP 1
-#define SK_SEN_VOLT 2
-#define SK_SEN_FAN 3
+#define SK_SEN_UNKNOWN 0
+#define SK_SEN_TEMP 1
+#define SK_SEN_VOLT 2
+#define SK_SEN_FAN 3
/*
- * Define for the ErrorFlag
+ * Define for the SenErrorFlag
*/
-#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
-#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
-#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
+#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */
+#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */
+#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */
+#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */
+#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */
/*
* Define the Sensor struct
*/
struct s_Sensor {
- char *SenDesc; /* Description */
- int SenType; /* Voltage or Temperature */
- SK_I32 SenValue; /* Current value of the sensor */
- SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
- SK_I32 SenThreWarnHigh;/* High warning Threshhold of this sensor */
- SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
- SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
- int SenErrFlag; /* Sensor indicated an error */
- SK_BOOL SenInit; /* Is sensor initialized? */
- SK_U64 SenErrCts; /* Error trap counter */
- SK_U64 SenWarnCts; /* Warning trap counter */
- SK_U64 SenBegErrTS; /* Begin error timestamp */
- SK_U64 SenBegWarnTS; /* Begin warning timestamp */
+ char *SenDesc; /* Description */
+ int SenType; /* Voltage or Temperature */
+ SK_I32 SenValue; /* Current value of the sensor */
+ SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */
+ SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */
+ SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */
+ SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */
+ int SenErrFlag; /* Sensor indicated an error */
+ SK_BOOL SenInit; /* Is sensor initialized ? */
+ SK_U64 SenErrCts; /* Error trap counter */
+ SK_U64 SenWarnCts; /* Warning trap counter */
+ SK_U64 SenBegErrTS; /* Begin error timestamp */
+ SK_U64 SenBegWarnTS; /* Begin warning timestamp */
SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */
SK_U64 SenLastErrLogTS; /* Last error log timestamp */
SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */
SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */
- int SenState; /* Sensor State (see HW specific include) */
- int (*SenRead)(SK_AC *pAC, SK_IOC IoC,struct s_Sensor *pSen) ;
- /* Sensors read function */
- SK_U16 SenReg; /* Register Address for this sensor */
- SK_U8 SenDev; /* DeviceSelection for this sensor */
-} ;
-
+ int SenState; /* Sensor State (see HW specific include) */
+ int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
+ /* Sensors read function */
+ SK_U16 SenReg; /* Register Address for this sensor */
+ SK_U8 SenDev; /* Device Selection for this sensor */
+};
typedef struct s_I2c {
SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */
- int CurrSens; /* Which sensor is currently queried */
- int MaxSens; /* Max. number of sensors */
- int InitLevel; /* Initialized Level */
+ int CurrSens; /* Which sensor is currently queried */
+ int MaxSens; /* Max. number of sensors */
+ int TimerMode; /* Use the timer also to watch the state machine */
+ int InitLevel; /* Initialized Level */
#ifndef SK_DIAG
- int DummyReads; /* Number of non-checked dummy reads */
+ int DummyReads; /* Number of non-checked dummy reads */
SK_TIMER SenTimer; /* Sensors timer */
-#endif /* !SK_DIAG */
+#endif /* !SK_DIAG */
} SK_I2C;
extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
#endif
-#endif /* n_SKI2C_H */
+#endif /* n_SKI2C_H */
projects / linux-flexiantxendom0-3.2.10.git / blobdiff